drivers/ide/pci/sgiioc4.c

   1 /*
   2  * Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of version 2 of the GNU General Public License
   6  * as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope that it would be useful, but
   9  * WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  11  *
  12  * You should have received a copy of the GNU General Public
  13  * License along with this program; if not, write the Free Software
  14  * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  15  *
  16  * For further information regarding this notice, see:
  17  *
  18  * http://oss.sgi.com/projects/GenInfo/NoticeExplan
  19  */
  20
  21 #include <linux/module.h>
  22 #include <linux/types.h>
  23 #include <linux/pci.h>
  24 #include <linux/delay.h>
  25 #include <linux/hdreg.h>
  26 #include <linux/init.h>
  27 #include <linux/kernel.h>
  28 #include <linux/timer.h>
  29 #include <linux/mm.h>
  30 #include <linux/ioport.h>
  31 #include <linux/blkdev.h>
  32 #include <linux/ioc4.h>
  33 #include <asm/io.h>
  34
  35 #include <linux/ide.h>
  36
  37 /* IOC4 Specific Definitions */
  38 #define IOC4_CMD_OFFSET         0x100
  39 #define IOC4_CTRL_OFFSET        0x120
  40 #define IOC4_DMA_OFFSET         0x140
  41 #define IOC4_INTR_OFFSET        0x0
  42
  43 #define IOC4_TIMING             0x00
  44 #define IOC4_DMA_PTR_L          0x01
  45 #define IOC4_DMA_PTR_H          0x02
  46 #define IOC4_DMA_ADDR_L         0x03
  47 #define IOC4_DMA_ADDR_H         0x04
  48 #define IOC4_BC_DEV             0x05
  49 #define IOC4_BC_MEM             0x06
  50 #define IOC4_DMA_CTRL           0x07
  51 #define IOC4_DMA_END_ADDR       0x08
  52
  53 /* Bits in the IOC4 Control/Status Register */
  54 #define IOC4_S_DMA_START        0x01
  55 #define IOC4_S_DMA_STOP         0x02
  56 #define IOC4_S_DMA_DIR          0x04
  57 #define IOC4_S_DMA_ACTIVE       0x08
  58 #define IOC4_S_DMA_ERROR        0x10
  59 #define IOC4_ATA_MEMERR         0x02
  60
  61 /* Read/Write Directions */
  62 #define IOC4_DMA_WRITE          0x04
  63 #define IOC4_DMA_READ           0x00
  64
  65 /* Interrupt Register Offsets */
  66 #define IOC4_INTR_REG           0x03
  67 #define IOC4_INTR_SET           0x05
  68 #define IOC4_INTR_CLEAR         0x07
  69
  70 #define IOC4_IDE_CACHELINE_SIZE 128
  71 #define IOC4_CMD_CTL_BLK_SIZE   0x20
  72 #define IOC4_SUPPORTED_FIRMWARE_REV 46
  73
  74 typedef struct {
  75         u32 timing_reg0;
  76         u32 timing_reg1;
  77         u32 low_mem_ptr;
  78         u32 high_mem_ptr;
  79         u32 low_mem_addr;
  80         u32 high_mem_addr;
  81         u32 dev_byte_count;
  82         u32 mem_byte_count;
  83         u32 status;
  84 } ioc4_dma_regs_t;
  85
  86 /* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
  87 /* IOC4 has only 1 IDE channel */
  88 #define IOC4_PRD_BYTES       16
  89 #define IOC4_PRD_ENTRIES     (PAGE_SIZE /(4*IOC4_PRD_BYTES))
  90
  91
  92 static void
  93 sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
  94                         unsigned long ctrl_port, unsigned long irq_port)
  95 {
  96         unsigned long reg = data_port;
  97         int i;
  98
  99         /* Registers are word (32 bit) aligned */
 100         for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
 101                 hw->io_ports[i] = reg + i * 4;
 102
 103         if (ctrl_port)
 104                 hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
 105
 106         if (irq_port)
 107                 hw->io_ports[IDE_IRQ_OFFSET] = irq_port;
 108 }
 109
 110 static void
 111 sgiioc4_maskproc(ide_drive_t * drive, int mask)
 112 {
 113         ide_hwif_t *hwif = HWIF(drive);
 114         hwif->OUTB(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
 115                    IDE_CONTROL_REG);
 116 }
 117
 118
 119 static int
 120 sgiioc4_checkirq(ide_hwif_t * hwif)
 121 {
 122         u8 intr_reg =
 123             hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET] + IOC4_INTR_REG * 4);
 124
 125         if (intr_reg & 0x03)
 126                 return 1;
 127
 128         return 0;
 129 }
 130
 131
 132 static int
 133 sgiioc4_clearirq(ide_drive_t * drive)
 134 {
 135         u32 intr_reg;
 136         ide_hwif_t *hwif = HWIF(drive);
 137         unsigned long other_ir =
 138             hwif->io_ports[IDE_IRQ_OFFSET] + (IOC4_INTR_REG << 2);
 139
 140         /* Code to check for PCI error conditions */
 141         intr_reg = hwif->INL(other_ir);
 142         if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
 143                 /*
 144                  * Using hwif->INB to read the IDE_STATUS_REG has a side effect
 145                  * of clearing the interrupt.  The first read should clear it
 146                  * if it is set.  The second read should return a "clear" status
 147                  * if it got cleared.  If not, then spin for a bit trying to
 148                  * clear it.
 149                  */
 150                 u8 stat = hwif->INB(IDE_STATUS_REG);
 151                 int count = 0;
 152                 stat = hwif->INB(IDE_STATUS_REG);
 153                 while ((stat & 0x80) && (count++ < 100)) {
 154                         udelay(1);
 155                         stat = hwif->INB(IDE_STATUS_REG);
 156                 }
 157
 158                 if (intr_reg & 0x02) {
 159                         /* Error when transferring DMA data on PCI bus */
 160                         u32 pci_err_addr_low, pci_err_addr_high,
 161                             pci_stat_cmd_reg;
 162
 163                         pci_err_addr_low =
 164                                 hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET]);
 165                         pci_err_addr_high =
 166                                 hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET] + 4);
 167                         pci_read_config_dword(hwif->pci_dev, PCI_COMMAND,
 168                                               &pci_stat_cmd_reg);
 169                         printk(KERN_ERR
 170                                "%s(%s) : PCI Bus Error when doing DMA:"
 171                                    " status-cmd reg is 0x%x\n",
 172                                __FUNCTION__, drive->name, pci_stat_cmd_reg);
 173                         printk(KERN_ERR
 174                                "%s(%s) : PCI Error Address is 0x%x%x\n",
 175                                __FUNCTION__, drive->name,
 176                                pci_err_addr_high, pci_err_addr_low);
 177                         /* Clear the PCI Error indicator */
 178                         pci_write_config_dword(hwif->pci_dev, PCI_COMMAND,
 179                                                0x00000146);
 180                 }
 181
 182                 /* Clear the Interrupt, Error bits on the IOC4 */
 183                 hwif->OUTL(0x03, other_ir);
 184
 185                 intr_reg = hwif->INL(other_ir);
 186         }
 187
 188         return intr_reg & 3;
 189 }
 190
 191 static void sgiioc4_ide_dma_start(ide_drive_t * drive)
 192 {
 193         ide_hwif_t *hwif = HWIF(drive);
 194         unsigned int reg = hwif->INL(hwif->dma_base + IOC4_DMA_CTRL * 4);
 195         unsigned int temp_reg = reg | IOC4_S_DMA_START;
 196
 197         hwif->OUTL(temp_reg, hwif->dma_base + IOC4_DMA_CTRL * 4);
 198 }
 199
 200 static u32
 201 sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
 202 {
 203         u32     ioc4_dma;
 204         int     count;
 205
 206         count = 0;
 207         ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4);
 208         while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) {
 209                 udelay(1);
 210                 ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4);
 211         }
 212         return ioc4_dma;
 213 }
 214
 215 /* Stops the IOC4 DMA Engine */
 216 static int
 217 sgiioc4_ide_dma_end(ide_drive_t * drive)
 218 {
 219         u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0;
 220         ide_hwif_t *hwif = HWIF(drive);
 221         u64 dma_base = hwif->dma_base;
 222         int dma_stat = 0;
 223         unsigned long *ending_dma = (unsigned long *) hwif->dma_base2;
 224
 225         hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4);
 226
 227         ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 228
 229         if (ioc4_dma & IOC4_S_DMA_STOP) {
 230                 printk(KERN_ERR
 231                        "%s(%s): IOC4 DMA STOP bit is still 1 :"
 232                        "ioc4_dma_reg 0x%x\n",
 233                        __FUNCTION__, drive->name, ioc4_dma);
 234                 dma_stat = 1;
 235         }
 236
 237         /*
 238          * The IOC4 will DMA 1's to the ending dma area to indicate that
 239          * previous data DMA is complete.  This is necessary because of relaxed
 240          * ordering between register reads and DMA writes on the Altix.
 241          */
 242         while ((cnt++ < 200) && (!valid)) {
 243                 for (num = 0; num < 16; num++) {
 244                         if (ending_dma[num]) {
 245                                 valid = 1;
 246                                 break;
 247                         }
 248                 }
 249                 udelay(1);
 250         }
 251         if (!valid) {
 252                 printk(KERN_ERR "%s(%s) : DMA incomplete\n", __FUNCTION__,
 253                        drive->name);
 254                 dma_stat = 1;
 255         }
 256
 257         bc_dev = hwif->INL(dma_base + IOC4_BC_DEV * 4);
 258         bc_mem = hwif->INL(dma_base + IOC4_BC_MEM * 4);
 259
 260         if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) {
 261                 if (bc_dev > bc_mem + 8) {
 262                         printk(KERN_ERR
 263                                "%s(%s): WARNING!! byte_count_dev %d "
 264                                "!= byte_count_mem %d\n",
 265                                __FUNCTION__, drive->name, bc_dev, bc_mem);
 266                 }
 267         }
 268
 269         drive->waiting_for_dma = 0;
 270         ide_destroy_dmatable(drive);
 271
 272         return dma_stat;
 273 }
 274
 275 static int
 276 sgiioc4_ide_dma_check(ide_drive_t * drive)
 277 {
 278         if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0) {
 279                 printk(KERN_INFO
 280                        "Couldnot set %s in Multimode-2 DMA mode | "
 281                            "Drive %s using PIO instead\n",
 282                        drive->name, drive->name);
 283                 drive->using_dma = 0;
 284         } else
 285                 drive->using_dma = 1;
 286
 287         return 0;
 288 }
 289
 290 static int
 291 sgiioc4_ide_dma_on(ide_drive_t * drive)
 292 {
 293         drive->using_dma = 1;
 294
 295         return HWIF(drive)->ide_dma_host_on(drive);
 296 }
 297
 298 static int
 299 sgiioc4_ide_dma_off_quietly(ide_drive_t * drive)
 300 {
 301         drive->using_dma = 0;
 302
 303         return HWIF(drive)->ide_dma_host_off(drive);
 304 }
 305
 306 /* returns 1 if dma irq issued, 0 otherwise */
 307 static int
 308 sgiioc4_ide_dma_test_irq(ide_drive_t * drive)
 309 {
 310         return sgiioc4_checkirq(HWIF(drive));
 311 }
 312
 313 static int
 314 sgiioc4_ide_dma_host_on(ide_drive_t * drive)
 315 {
 316         if (drive->using_dma)
 317                 return 0;
 318
 319         return 1;
 320 }
 321
 322 static int
 323 sgiioc4_ide_dma_host_off(ide_drive_t * drive)
 324 {
 325         sgiioc4_clearirq(drive);
 326
 327         return 0;
 328 }
 329
 330 static int
 331 sgiioc4_ide_dma_lostirq(ide_drive_t * drive)
 332 {
 333         HWIF(drive)->resetproc(drive);
 334
 335         return __ide_dma_lostirq(drive);
 336 }
 337
 338 static void
 339 sgiioc4_resetproc(ide_drive_t * drive)
 340 {
 341         sgiioc4_ide_dma_end(drive);
 342         sgiioc4_clearirq(drive);
 343 }
 344
 345 static u8
 346 sgiioc4_INB(unsigned long port)
 347 {
 348         u8 reg = (u8) readb((void __iomem *) port);
 349
 350         if ((port & 0xFFF) == 0x11C) {  /* Status register of IOC4 */
 351                 if (reg & 0x51) {       /* Not busy...check for interrupt */
 352                         unsigned long other_ir = port - 0x110;
 353                         unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
 354
 355                         /* Clear the Interrupt, Error bits on the IOC4 */
 356                         if (intr_reg & 0x03) {
 357                                 writel(0x03, (void __iomem *) other_ir);
 358                                 intr_reg = (u32) readl((void __iomem *) other_ir);
 359                         }
 360                 }
 361         }
 362
 363         return reg;
 364 }
 365
 366 /* Creates a dma map for the scatter-gather list entries */
 367 static void __devinit
 368 ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
 369 {
 370         int num_ports = sizeof (ioc4_dma_regs_t);
 371
 372         printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name,
 373                dma_base, dma_base + num_ports - 1);
 374
 375         if (!request_region(dma_base, num_ports, hwif->name)) {
 376                 printk(KERN_ERR
 377                        "%s(%s) -- ERROR, Addresses 0x%p to 0x%p "
 378                        "ALREADY in use\n",
 379                        __FUNCTION__, hwif->name, (void *) dma_base,
 380                        (void *) dma_base + num_ports - 1);
 381                 goto dma_alloc_failure;
 382         }
 383
 384         hwif->dma_base = dma_base;
 385         hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev,
 386                                           IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
 387                                           &hwif->dmatable_dma);
 388
 389         if (!hwif->dmatable_cpu)
 390                 goto dma_alloc_failure;
 391
 392         hwif->sg_max_nents = IOC4_PRD_ENTRIES;
 393
 394         hwif->dma_base2 = (unsigned long)
 395                 pci_alloc_consistent(hwif->pci_dev,
 396                                      IOC4_IDE_CACHELINE_SIZE,
 397                                      (dma_addr_t *) &(hwif->dma_status));
 398
 399         if (!hwif->dma_base2)
 400                 goto dma_base2alloc_failure;
 401
 402         return;
 403
 404 dma_base2alloc_failure:
 405         pci_free_consistent(hwif->pci_dev,
 406                             IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
 407                             hwif->dmatable_cpu, hwif->dmatable_dma);
 408         printk(KERN_INFO
 409                "%s() -- Error! Unable to allocate DMA Maps for drive %s\n",
 410                __FUNCTION__, hwif->name);
 411         printk(KERN_INFO
 412                "Changing from DMA to PIO mode for Drive %s\n", hwif->name);
 413
 414 dma_alloc_failure:
 415         /* Disable DMA because we couldnot allocate any DMA maps */
 416         hwif->autodma = 0;
 417         hwif->atapi_dma = 0;
 418 }
 419
 420 /* Initializes the IOC4 DMA Engine */
 421 static void
 422 sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
 423 {
 424         u32 ioc4_dma;
 425         ide_hwif_t *hwif = HWIF(drive);
 426         u64 dma_base = hwif->dma_base;
 427         u32 dma_addr, ending_dma_addr;
 428
 429         ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4);
 430
 431         if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
 432                 printk(KERN_WARNING
 433                         "%s(%s):Warning!! DMA from previous transfer was still active\n",
 434                        __FUNCTION__, drive->name);
 435                 hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4);
 436                 ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 437
 438                 if (ioc4_dma & IOC4_S_DMA_STOP)
 439                         printk(KERN_ERR
 440                                "%s(%s) : IOC4 Dma STOP bit is still 1\n",
 441                                __FUNCTION__, drive->name);
 442         }
 443
 444         ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4);
 445         if (ioc4_dma & IOC4_S_DMA_ERROR) {
 446                 printk(KERN_WARNING
 447                        "%s(%s) : Warning!! - DMA Error during Previous"
 448                        " transfer | status 0x%x\n",
 449                        __FUNCTION__, drive->name, ioc4_dma);
 450                 hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4);
 451                 ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 452
 453                 if (ioc4_dma & IOC4_S_DMA_STOP)
 454                         printk(KERN_ERR
 455                                "%s(%s) : IOC4 DMA STOP bit is still 1\n",
 456                                __FUNCTION__, drive->name);
 457         }
 458
 459         /* Address of the Scatter Gather List */
 460         dma_addr = cpu_to_le32(hwif->dmatable_dma);
 461         hwif->OUTL(dma_addr, dma_base + IOC4_DMA_PTR_L * 4);
 462
 463         /* Address of the Ending DMA */
 464         memset((unsigned int *) hwif->dma_base2, 0, IOC4_IDE_CACHELINE_SIZE);
 465         ending_dma_addr = cpu_to_le32(hwif->dma_status);
 466         hwif->OUTL(ending_dma_addr, dma_base + IOC4_DMA_END_ADDR * 4);
 467
 468         hwif->OUTL(dma_direction, dma_base + IOC4_DMA_CTRL * 4);
 469         drive->waiting_for_dma = 1;
 470 }
 471
 472 /* IOC4 Scatter Gather list Format                                       */
 473 /* 128 Bit entries to support 64 bit addresses in the future             */
 474 /* The Scatter Gather list Entry should be in the BIG-ENDIAN Format      */
 475 /* --------------------------------------------------------------------- */
 476 /* | Upper 32 bits - Zero           |           Lower 32 bits- address | */
 477 /* --------------------------------------------------------------------- */
 478 /* | Upper 32 bits - Zero           |EOL| 15 unused     | 16 Bit Length| */
 479 /* --------------------------------------------------------------------- */
 480 /* Creates the scatter gather list, DMA Table */
 481 static unsigned int
 482 sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
 483 {
 484         ide_hwif_t *hwif = HWIF(drive);
 485         unsigned int *table = hwif->dmatable_cpu;
 486         unsigned int count = 0, i = 1;
 487         struct scatterlist *sg;
 488
 489         hwif->sg_nents = i = ide_build_sglist(drive, rq);
 490
 491         if (!i)
 492                 return 0;       /* sglist of length Zero */
 493
 494         sg = hwif->sg_table;
 495         while (i && sg_dma_len(sg)) {
 496                 dma_addr_t cur_addr;
 497                 int cur_len;
 498                 cur_addr = sg_dma_address(sg);
 499                 cur_len = sg_dma_len(sg);
 500
 501                 while (cur_len) {
 502                         if (count++ >= IOC4_PRD_ENTRIES) {
 503                                 printk(KERN_WARNING
 504                                        "%s: DMA table too small\n",
 505                                        drive->name);
 506                                 goto use_pio_instead;
 507                         } else {
 508                                 u32 bcount =
 509                                     0x10000 - (cur_addr & 0xffff);
 510
 511                                 if (bcount > cur_len)
 512                                         bcount = cur_len;
 513
 514                                 /* put the addr, length in
 515                                  * the IOC4 dma-table format */
 516                                 *table = 0x0;
 517                                 table++;
 518                                 *table = cpu_to_be32(cur_addr);
 519                                 table++;
 520                                 *table = 0x0;
 521                                 table++;
 522
 523                                 *table = cpu_to_be32(bcount);
 524                                 table++;
 525
 526                                 cur_addr += bcount;
 527                                 cur_len -= bcount;
 528                         }
 529                 }
 530
 531                 sg++;
 532                 i--;
 533         }
 534
 535         if (count) {
 536                 table--;
 537                 *table |= cpu_to_be32(0x80000000);
 538                 return count;
 539         }
 540
 541 use_pio_instead:
 542         pci_unmap_sg(hwif->pci_dev, hwif->sg_table, hwif->sg_nents,
 543                      hwif->sg_dma_direction);
 544
 545         return 0;               /* revert to PIO for this request */
 546 }
 547
 548 static int sgiioc4_ide_dma_setup(ide_drive_t *drive)
 549 {
 550         struct request *rq = HWGROUP(drive)->rq;
 551         unsigned int count = 0;
 552         int ddir;
 553
 554         if (rq_data_dir(rq))
 555                 ddir = PCI_DMA_TODEVICE;
 556         else
 557                 ddir = PCI_DMA_FROMDEVICE;
 558
 559         if (!(count = sgiioc4_build_dma_table(drive, rq, ddir))) {
 560                 /* try PIO instead of DMA */
 561                 ide_map_sg(drive, rq);
 562                 return 1;
 563         }
 564
 565         if (rq_data_dir(rq))
 566                 /* Writes TO the IOC4 FROM Main Memory */
 567                 ddir = IOC4_DMA_READ;
 568         else
 569                 /* Writes FROM the IOC4 TO Main Memory */
 570                 ddir = IOC4_DMA_WRITE;
 571
 572         sgiioc4_configure_for_dma(ddir, drive);
 573
 574         return 0;
 575 }
 576
 577 static void __devinit
 578 ide_init_sgiioc4(ide_hwif_t * hwif)
 579 {
 580         hwif->mmio = 2;
 581         hwif->autodma = 1;
 582         hwif->atapi_dma = 1;
 583         hwif->ultra_mask = 0x0; /* Disable Ultra DMA */
 584         hwif->mwdma_mask = 0x2; /* Multimode-2 DMA  */
 585         hwif->swdma_mask = 0x2;
 586         hwif->tuneproc = NULL;  /* Sets timing for PIO mode */
 587         hwif->speedproc = NULL; /* Sets timing for DMA &/or PIO modes */
 588         hwif->selectproc = NULL;/* Use the default routine to select drive */
 589         hwif->reset_poll = NULL;/* No HBA specific reset_poll needed */
 590         hwif->pre_reset = NULL; /* No HBA specific pre_set needed */
 591         hwif->resetproc = &sgiioc4_resetproc;/* Reset DMA engine,
 592                                                 clear interrupts */
 593         hwif->intrproc = NULL;  /* Enable or Disable interrupt from drive */
 594         hwif->maskproc = &sgiioc4_maskproc;     /* Mask on/off NIEN register */
 595         hwif->quirkproc = NULL;
 596         hwif->busproc = NULL;
 597
 598         hwif->dma_setup = &sgiioc4_ide_dma_setup;
 599         hwif->dma_start = &sgiioc4_ide_dma_start;
 600         hwif->ide_dma_end = &sgiioc4_ide_dma_end;
 601         hwif->ide_dma_check = &sgiioc4_ide_dma_check;
 602         hwif->ide_dma_on = &sgiioc4_ide_dma_on;
 603         hwif->ide_dma_off_quietly = &sgiioc4_ide_dma_off_quietly;
 604         hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq;
 605         hwif->ide_dma_host_on = &sgiioc4_ide_dma_host_on;
 606         hwif->ide_dma_host_off = &sgiioc4_ide_dma_host_off;
 607         hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
 608         hwif->ide_dma_timeout = &__ide_dma_timeout;
 609
 610         /*
 611          * The IOC4 uses MMIO rather than Port IO.
 612          * It also needs special workarounds for INB.
 613          */
 614         default_hwif_mmiops(hwif);
 615         hwif->INB = &sgiioc4_INB;
 616 }
 617
 618 static int __devinit
 619 sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
 620 {
 621         unsigned long base, ctl, dma_base, irqport;
 622         ide_hwif_t *hwif;
 623         int h;
 624
 625         /*
 626          * Find an empty HWIF; if none available, return -ENOMEM.
 627          */
 628         for (h = 0; h < MAX_HWIFS; ++h) {
 629                 hwif = &ide_hwifs[h];
 630                 if (hwif->chipset == ide_unknown)
 631                         break;
 632         }
 633         if (h == MAX_HWIFS) {
 634                 printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", d->name);
 635                 return -ENOMEM;
 636         }
 637
 638         /*  Get the CmdBlk and CtrlBlk Base Registers */
 639         base = pci_resource_start(dev, 0) + IOC4_CMD_OFFSET;
 640         ctl = pci_resource_start(dev, 0) + IOC4_CTRL_OFFSET;
 641         irqport = pci_resource_start(dev, 0) + IOC4_INTR_OFFSET;
 642         dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
 643
 644         if (!request_region(base, IOC4_CMD_CTL_BLK_SIZE, hwif->name)) {
 645                 printk(KERN_ERR
 646                         "%s : %s -- ERROR, Port Addresses "
 647                         "0x%p to 0x%p ALREADY in use\n",
 648                        __FUNCTION__, hwif->name, (void *) base,
 649                        (void *) base + IOC4_CMD_CTL_BLK_SIZE);
 650                 return -ENOMEM;
 651         }
 652
 653         if (hwif->io_ports[IDE_DATA_OFFSET] != base) {
 654                 /* Initialize the IO registers */
 655                 sgiioc4_init_hwif_ports(&hwif->hw, base, ctl, irqport);
 656                 memcpy(hwif->io_ports, hwif->hw.io_ports,
 657                        sizeof (hwif->io_ports));
 658                 hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
 659         }
 660
 661         hwif->irq = dev->irq;
 662         hwif->chipset = ide_pci;
 663         hwif->pci_dev = dev;
 664         hwif->channel = 0;      /* Single Channel chip */
 665         hwif->cds = (struct ide_pci_device_s *) d;
 666         hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */
 667
 668         /* Initializing chipset IRQ Registers */
 669         hwif->OUTL(0x03, irqport + IOC4_INTR_SET * 4);
 670
 671         ide_init_sgiioc4(hwif);
 672
 673         if (dma_base)
 674                 ide_dma_sgiioc4(hwif, dma_base);
 675         else
 676                 printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n",
 677                        hwif->name, d->name);
 678
 679         if (probe_hwif_init(hwif))
 680                 return -EIO;
 681
 682         /* Create /proc/ide entries */
 683         create_proc_ide_interfaces();
 684
 685         return 0;
 686 }
 687
 688 static unsigned int __devinit
 689 pci_init_sgiioc4(struct pci_dev *dev, ide_pci_device_t * d)
 690 {
 691         unsigned int class_rev;
 692         int ret;
 693
 694         pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
 695         class_rev &= 0xff;
 696         printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n",
 697                         d->name, pci_name(dev), class_rev);
 698         if (class_rev < IOC4_SUPPORTED_FIRMWARE_REV) {
 699                 printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
 700                         "firmware is obsolete - please upgrade to revision"
 701                         "46 or higher\n", d->name, pci_name(dev));
 702                 ret = -EAGAIN;
 703                 goto out;
 704         }
 705         ret = sgiioc4_ide_setup_pci_device(dev, d);
 706 out:
 707         return ret;
 708 }
 709
 710 static ide_pci_device_t sgiioc4_chipsets[] __devinitdata = {
 711         {
 712          /* Channel 0 */
 713          .name = "SGIIOC4",
 714          .init_hwif = ide_init_sgiioc4,
 715          .init_dma = ide_dma_sgiioc4,
 716          .channels = 1,
 717          .autodma = AUTODMA,
 718          /* SGI IOC4 doesn't have enablebits. */
 719          .bootable = ON_BOARD,
 720         }
 721 };
 722
 723 int
 724 ioc4_ide_attach_one(struct ioc4_driver_data *idd)
 725 {
 726         return pci_init_sgiioc4(idd->idd_pdev,
 727                                 &sgiioc4_chipsets[idd->idd_pci_id->driver_data]);
 728 }
 729
 730 static struct ioc4_submodule ioc4_ide_submodule = {
 731         .is_name = "IOC4_ide",
 732         .is_owner = THIS_MODULE,
 733         .is_probe = ioc4_ide_attach_one,
 734 /*      .is_remove = ioc4_ide_remove_one,       */
 735 };
 736
 737 static int __devinit
 738 ioc4_ide_init(void)
 739 {
 740         return ioc4_register_submodule(&ioc4_ide_submodule);
 741 }
 742
 743 static void __devexit
 744 ioc4_ide_exit(void)
 745 {
 746         ioc4_unregister_submodule(&ioc4_ide_submodule);
 747 }
 748
 749 module_init(ioc4_ide_init);
 750 module_exit(ioc4_ide_exit);
 751
 752 MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
 753 MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
 754 MODULE_LICENSE("GPL");