drivers/hid/intel-ish-hid/ishtp-fw-loader.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * ISH-TP client driver for ISH firmware loading
   4  *
   5  * Copyright (c) 2019, Intel Corporation.
   6  */
   7
   8 #include <linux/firmware.h>
   9 #include <linux/module.h>
  10 #include <linux/pci.h>
  11 #include <linux/intel-ish-client-if.h>
  12 #include <linux/property.h>
  13 #include <asm/cacheflush.h>
  14
  15 /* Number of times we attempt to load the firmware before giving up */
  16 #define MAX_LOAD_ATTEMPTS                       3
  17
  18 /* ISH TX/RX ring buffer pool size */
  19 #define LOADER_CL_RX_RING_SIZE                  1
  20 #define LOADER_CL_TX_RING_SIZE                  1
  21
  22 /*
  23  * ISH Shim firmware loader reserves 4 Kb buffer in SRAM. The buffer is
  24  * used to temporarily hold the data transferred from host to Shim
  25  * firmware loader. Reason for the odd size of 3968 bytes? Each IPC
  26  * transfer is 128 bytes (= 4 bytes header + 124 bytes payload). So the
  27  * 4 Kb buffer can hold maximum of 32 IPC transfers, which means we can
  28  * have a max payload of 3968 bytes (= 32 x 124 payload).
  29  */
  30 #define LOADER_SHIM_IPC_BUF_SIZE                3968
  31
  32 /**
  33  * enum ish_loader_commands -   ISH loader host commands.
  34  * LOADER_CMD_XFER_QUERY        Query the Shim firmware loader for
  35  *                              capabilities
  36  * LOADER_CMD_XFER_FRAGMENT     Transfer one firmware image fragment at a
  37  *                              time. The command may be executed
  38  *                              multiple times until the entire firmware
  39  *                              image is downloaded to SRAM.
  40  * LOADER_CMD_START             Start executing the main firmware.
  41  */
  42 enum ish_loader_commands {
  43         LOADER_CMD_XFER_QUERY = 0,
  44         LOADER_CMD_XFER_FRAGMENT,
  45         LOADER_CMD_START,
  46 };
  47
  48 /* Command bit mask */
  49 #define CMD_MASK                                GENMASK(6, 0)
  50 #define IS_RESPONSE                             BIT(7)
  51
  52 /*
  53  * ISH firmware max delay for one transmit failure is 1 Hz,
  54  * and firmware will retry 2 times, so 3 Hz is used for timeout.
  55  */
  56 #define ISHTP_SEND_TIMEOUT                      (3 * HZ)
  57
  58 /*
  59  * Loader transfer modes:
  60  *
  61  * LOADER_XFER_MODE_ISHTP mode uses the existing ISH-TP mechanism to
  62  * transfer data. This may use IPC or DMA if supported in firmware.
  63  * The buffer size is limited to 4 Kb by the IPC/ISH-TP protocol for
  64  * both IPC & DMA (legacy).
  65  *
  66  * LOADER_XFER_MODE_DIRECT_DMA - firmware loading is a bit different
  67  * from the sensor data streaming. Here we download a large (300+ Kb)
  68  * image directly to ISH SRAM memory. There is limited benefit of
  69  * DMA'ing 300 Kb image in 4 Kb chucks limit. Hence, we introduce
  70  * this "direct dma" mode, where we do not use ISH-TP for DMA, but
  71  * instead manage the DMA directly in kernel driver and Shim firmware
  72  * loader (allocate buffer, break in chucks and transfer). This allows
  73  * to overcome 4 Kb limit, and optimize the data flow path in firmware.
  74  */
  75 #define LOADER_XFER_MODE_DIRECT_DMA             BIT(0)
  76 #define LOADER_XFER_MODE_ISHTP                  BIT(1)
  77
  78 /* ISH Transport Loader client unique GUID */
  79 static const guid_t loader_ishtp_guid =
  80         GUID_INIT(0xc804d06a, 0x55bd, 0x4ea7,
  81                   0xad, 0xed, 0x1e, 0x31, 0x22, 0x8c, 0x76, 0xdc);
  82
  83 #define FILENAME_SIZE                           256
  84
  85 /*
  86  * The firmware loading latency will be minimum if we can DMA the
  87  * entire ISH firmware image in one go. This requires that we allocate
  88  * a large DMA buffer in kernel, which could be problematic on some
  89  * platforms. So here we limit the DMA buffer size via a module_param.
  90  * We default to 4 pages, but a customer can set it to higher limit if
  91  * deemed appropriate for his platform.
  92  */
  93 static int dma_buf_size_limit = 4 * PAGE_SIZE;
  94
  95 /**
  96  * struct loader_msg_hdr - Header for ISH Loader commands.
  97  * @command:            LOADER_CMD* commands. Bit 7 is the response.
  98  * @status:             Command response status. Non 0, is error
  99  *                      condition.
 100  *
 101  * This structure is used as header for every command/data sent/received
 102  * between Host driver and ISH Shim firmware loader.
 103  */
 104 struct loader_msg_hdr {
 105         u8 command;
 106         u8 reserved[2];
 107         u8 status;
 108 } __packed;
 109
 110 struct loader_xfer_query {
 111         struct loader_msg_hdr hdr;
 112         u32 image_size;
 113 } __packed;
 114
 115 struct ish_fw_version {
 116         u16 major;
 117         u16 minor;
 118         u16 hotfix;
 119         u16 build;
 120 } __packed;
 121
 122 union loader_version {
 123         u32 value;
 124         struct {
 125                 u8 major;
 126                 u8 minor;
 127                 u8 hotfix;
 128                 u8 build;
 129         };
 130 } __packed;
 131
 132 struct loader_capability {
 133         u32 max_fw_image_size;
 134         u32 xfer_mode;
 135         u32 max_dma_buf_size; /* only for dma mode, multiples of cacheline */
 136 } __packed;
 137
 138 struct shim_fw_info {
 139         struct ish_fw_version ish_fw_version;
 140         u32 protocol_version;
 141         union loader_version ldr_version;
 142         struct loader_capability ldr_capability;
 143 } __packed;
 144
 145 struct loader_xfer_query_response {
 146         struct loader_msg_hdr hdr;
 147         struct shim_fw_info fw_info;
 148 } __packed;
 149
 150 struct loader_xfer_fragment {
 151         struct loader_msg_hdr hdr;
 152         u32 xfer_mode;
 153         u32 offset;
 154         u32 size;
 155         u32 is_last;
 156 } __packed;
 157
 158 struct loader_xfer_ipc_fragment {
 159         struct loader_xfer_fragment fragment;
 160         u8 data[] ____cacheline_aligned; /* variable length payload here */
 161 } __packed;
 162
 163 struct loader_xfer_dma_fragment {
 164         struct loader_xfer_fragment fragment;
 165         u64 ddr_phys_addr;
 166 } __packed;
 167
 168 struct loader_start {
 169         struct loader_msg_hdr hdr;
 170 } __packed;
 171
 172 /**
 173  * struct response_info - Encapsulate firmware response related
 174  *                      information for passing between function
 175  *                      loader_cl_send() and process_recv() callback.
 176  * @data                Copy the data received from firmware here.
 177  * @max_size            Max size allocated for the @data buffer. If the
 178  *                      received data exceeds this value, we log an
 179  *                      error.
 180  * @size                Actual size of data received from firmware.
 181  * @error               Returns 0 for success, negative error code for a
 182  *                      failure in function process_recv().
 183  * @received            Set to true on receiving a valid firmware
 184  *                      response to host command
 185  * @wait_queue          Wait queue for Host firmware loading where the
 186  *                      client sends message to ISH firmware and waits
 187  *                      for response
 188  */
 189 struct response_info {
 190         void *data;
 191         size_t max_size;
 192         size_t size;
 193         int error;
 194         bool received;
 195         wait_queue_head_t wait_queue;
 196 };
 197
 198 /**
 199  * struct ishtp_cl_data - Encapsulate per ISH-TP Client Data.
 200  * @work_ishtp_reset:   Work queue for reset handling.
 201  * @work_fw_load:       Work queue for host firmware loading.
 202  * @flag_retry          Flag for indicating host firmware loading should
 203  *                      be retried.
 204  * @retry_count         Count the number of retries.
 205  *
 206  * This structure is used to store data per client.
 207  */
 208 struct ishtp_cl_data {
 209         struct ishtp_cl *loader_ishtp_cl;
 210         struct ishtp_cl_device *cl_device;
 211
 212         /*
 213          * Used for passing firmware response information between
 214          * loader_cl_send() and process_recv() callback.
 215          */
 216         struct response_info response;
 217
 218         struct work_struct work_ishtp_reset;
 219         struct work_struct work_fw_load;
 220
 221         /*
 222          * In certain failure scenrios, it makes sense to reset the ISH
 223          * subsystem and retry Host firmware loading (e.g. bad message
 224          * packet, ENOMEM, etc.). On the other hand, failures due to
 225          * protocol mismatch, etc., are not recoverable. We do not
 226          * retry them.
 227          *
 228          * If set, the flag indicates that we should re-try the
 229          * particular failure.
 230          */
 231         bool flag_retry;
 232         int retry_count;
 233 };
 234
 235 #define IPC_FRAGMENT_DATA_PREAMBLE                              \
 236         offsetof(struct loader_xfer_ipc_fragment, data)
 237
 238 #define cl_data_to_dev(client_data) ishtp_device((client_data)->cl_device)
 239
 240 /**
 241  * get_firmware_variant() - Gets the filename of firmware image to be
 242  *                      loaded based on platform variant.
 243  * @client_data         Client data instance.
 244  * @filename            Returns firmware filename.
 245  *
 246  * Queries the firmware-name device property string.
 247  *
 248  * Return: 0 for success, negative error code for failure.
 249  */
 250 static int get_firmware_variant(struct ishtp_cl_data *client_data,
 251                                 char *filename)
 252 {
 253         int rv;
 254         const char *val;
 255         struct device *devc = ishtp_get_pci_device(client_data->cl_device);
 256
 257         rv = device_property_read_string(devc, "firmware-name", &val);
 258         if (rv < 0) {
 259                 dev_err(devc,
 260                         "Error: ISH firmware-name device property required\n");
 261                 return rv;
 262         }
 263         return snprintf(filename, FILENAME_SIZE, "intel/%s", val);
 264 }
 265
 266 /**
 267  * loader_cl_send()     Send message from host to firmware
 268  * @client_data:        Client data instance
 269  * @out_msg             Message buffer to be sent to firmware
 270  * @out_size            Size of out going message
 271  * @in_msg              Message buffer where the incoming data copied.
 272  *                      This buffer is allocated by calling
 273  * @in_size             Max size of incoming message
 274  *
 275  * Return: Number of bytes copied in the in_msg on success, negative
 276  * error code on failure.
 277  */
 278 static int loader_cl_send(struct ishtp_cl_data *client_data,
 279                           u8 *out_msg, size_t out_size,
 280                           u8 *in_msg, size_t in_size)
 281 {
 282         int rv;
 283         struct loader_msg_hdr *out_hdr = (struct loader_msg_hdr *)out_msg;
 284         struct ishtp_cl *loader_ishtp_cl = client_data->loader_ishtp_cl;
 285
 286         dev_dbg(cl_data_to_dev(client_data),
 287                 "%s: command=%02lx is_response=%u status=%02x\n",
 288                 __func__,
 289                 out_hdr->command & CMD_MASK,
 290                 out_hdr->command & IS_RESPONSE ? 1 : 0,
 291                 out_hdr->status);
 292
 293         /* Setup in coming buffer & size */
 294         client_data->response.data = in_msg;
 295         client_data->response.max_size = in_size;
 296         client_data->response.error = 0;
 297         client_data->response.received = false;
 298
 299         rv = ishtp_cl_send(loader_ishtp_cl, out_msg, out_size);
 300         if (rv < 0) {
 301                 dev_err(cl_data_to_dev(client_data),
 302                         "ishtp_cl_send error %d\n", rv);
 303                 return rv;
 304         }
 305
 306         wait_event_interruptible_timeout(client_data->response.wait_queue,
 307                                          client_data->response.received,
 308                                          ISHTP_SEND_TIMEOUT);
 309         if (!client_data->response.received) {
 310                 dev_err(cl_data_to_dev(client_data),
 311                         "Timed out for response to command=%02lx",
 312                         out_hdr->command & CMD_MASK);
 313                 return -ETIMEDOUT;
 314         }
 315
 316         if (client_data->response.error < 0)
 317                 return client_data->response.error;
 318
 319         return client_data->response.size;
 320 }
 321
 322 /**
 323  * process_recv() -     Receive and parse incoming packet
 324  * @loader_ishtp_cl:    Client instance to get stats
 325  * @rb_in_proc:         ISH received message buffer
 326  *
 327  * Parse the incoming packet. If it is a response packet then it will
 328  * update received and wake up the caller waiting to for the response.
 329  */
 330 static void process_recv(struct ishtp_cl *loader_ishtp_cl,
 331                          struct ishtp_cl_rb *rb_in_proc)
 332 {
 333         struct loader_msg_hdr *hdr;
 334         size_t data_len = rb_in_proc->buf_idx;
 335         struct ishtp_cl_data *client_data =
 336                 ishtp_get_client_data(loader_ishtp_cl);
 337
 338         /* Sanity check */
 339         if (!client_data->response.data) {
 340                 dev_err(cl_data_to_dev(client_data),
 341                         "Receiving buffer is null. Should be allocated by calling function\n");
 342                 client_data->response.error = -EINVAL;
 343                 goto end;
 344         }
 345
 346         if (client_data->response.received) {
 347                 dev_err(cl_data_to_dev(client_data),
 348                         "Previous firmware message not yet processed\n");
 349                 client_data->response.error = -EINVAL;
 350                 goto end;
 351         }
 352         /*
 353          * All firmware messages have a header. Check buffer size
 354          * before accessing elements inside.
 355          */
 356         if (!rb_in_proc->buffer.data) {
 357                 dev_warn(cl_data_to_dev(client_data),
 358                          "rb_in_proc->buffer.data returned null");
 359                 client_data->response.error = -EBADMSG;
 360                 goto end;
 361         }
 362
 363         if (data_len < sizeof(struct loader_msg_hdr)) {
 364                 dev_err(cl_data_to_dev(client_data),
 365                         "data size %zu is less than header %zu\n",
 366                         data_len, sizeof(struct loader_msg_hdr));
 367                 client_data->response.error = -EMSGSIZE;
 368                 goto end;
 369         }
 370
 371         hdr = (struct loader_msg_hdr *)rb_in_proc->buffer.data;
 372
 373         dev_dbg(cl_data_to_dev(client_data),
 374                 "%s: command=%02lx is_response=%u status=%02x\n",
 375                 __func__,
 376                 hdr->command & CMD_MASK,
 377                 hdr->command & IS_RESPONSE ? 1 : 0,
 378                 hdr->status);
 379
 380         if (((hdr->command & CMD_MASK) != LOADER_CMD_XFER_QUERY) &&
 381             ((hdr->command & CMD_MASK) != LOADER_CMD_XFER_FRAGMENT) &&
 382             ((hdr->command & CMD_MASK) != LOADER_CMD_START)) {
 383                 dev_err(cl_data_to_dev(client_data),
 384                         "Invalid command=%02lx\n",
 385                         hdr->command & CMD_MASK);
 386                 client_data->response.error = -EPROTO;
 387                 goto end;
 388         }
 389
 390         if (data_len > client_data->response.max_size) {
 391                 dev_err(cl_data_to_dev(client_data),
 392                         "Received buffer size %zu is larger than allocated buffer %zu\n",
 393                         data_len, client_data->response.max_size);
 394                 client_data->response.error = -EMSGSIZE;
 395                 goto end;
 396         }
 397
 398         /* We expect only "response" messages from firmware */
 399         if (!(hdr->command & IS_RESPONSE)) {
 400                 dev_err(cl_data_to_dev(client_data),
 401                         "Invalid response to command\n");
 402                 client_data->response.error = -EIO;
 403                 goto end;
 404         }
 405
 406         if (hdr->status) {
 407                 dev_err(cl_data_to_dev(client_data),
 408                         "Loader returned status %d\n",
 409                         hdr->status);
 410                 client_data->response.error = -EIO;
 411                 goto end;
 412         }
 413
 414         /* Update the actual received buffer size */
 415         client_data->response.size = data_len;
 416
 417         /*
 418          * Copy the buffer received in firmware response for the
 419          * calling thread.
 420          */
 421         memcpy(client_data->response.data,
 422                rb_in_proc->buffer.data, data_len);
 423
 424         /* Set flag before waking up the caller */
 425         client_data->response.received = true;
 426
 427 end:
 428         /* Free the buffer */
 429         ishtp_cl_io_rb_recycle(rb_in_proc);
 430         rb_in_proc = NULL;
 431
 432         /* Wake the calling thread */
 433         wake_up_interruptible(&client_data->response.wait_queue);
 434 }
 435
 436 /**
 437  * loader_cl_event_cb() - bus driver callback for incoming message
 438  * @device:             Pointer to the ishtp client device for which this
 439  *                      message is targeted
 440  *
 441  * Remove the packet from the list and process the message by calling
 442  * process_recv
 443  */
 444 static void loader_cl_event_cb(struct ishtp_cl_device *cl_device)
 445 {
 446         struct ishtp_cl_rb *rb_in_proc;
 447         struct ishtp_cl *loader_ishtp_cl = ishtp_get_drvdata(cl_device);
 448
 449         while ((rb_in_proc = ishtp_cl_rx_get_rb(loader_ishtp_cl)) != NULL) {
 450                 /* Process the data packet from firmware */
 451                 process_recv(loader_ishtp_cl, rb_in_proc);
 452         }
 453 }
 454
 455 /**
 456  * ish_query_loader_prop() -  Query ISH Shim firmware loader
 457  * @client_data:        Client data instance
 458  * @fw:                 Poiner to firmware data struct in host memory
 459  * @fw_info:            Loader firmware properties
 460  *
 461  * This function queries the ISH Shim firmware loader for capabilities.
 462  *
 463  * Return: 0 for success, negative error code for failure.
 464  */
 465 static int ish_query_loader_prop(struct ishtp_cl_data *client_data,
 466                                  const struct firmware *fw,
 467                                  struct shim_fw_info *fw_info)
 468 {
 469         int rv;
 470         struct loader_xfer_query ldr_xfer_query;
 471         struct loader_xfer_query_response ldr_xfer_query_resp;
 472
 473         memset(&ldr_xfer_query, 0, sizeof(ldr_xfer_query));
 474         ldr_xfer_query.hdr.command = LOADER_CMD_XFER_QUERY;
 475         ldr_xfer_query.image_size = fw->size;
 476         rv = loader_cl_send(client_data,
 477                             (u8 *)&ldr_xfer_query,
 478                             sizeof(ldr_xfer_query),
 479                             (u8 *)&ldr_xfer_query_resp,
 480                             sizeof(ldr_xfer_query_resp));
 481         if (rv < 0) {
 482                 client_data->flag_retry = true;
 483                 return rv;
 484         }
 485
 486         /* On success, the return value is the received buffer size */
 487         if (rv != sizeof(struct loader_xfer_query_response)) {
 488                 dev_err(cl_data_to_dev(client_data),
 489                         "data size %d is not equal to size of loader_xfer_query_response %zu\n",
 490                         rv, sizeof(struct loader_xfer_query_response));
 491                 client_data->flag_retry = true;
 492                 return -EMSGSIZE;
 493         }
 494
 495         /* Save fw_info for use outside this function */
 496         *fw_info = ldr_xfer_query_resp.fw_info;
 497
 498         /* Loader firmware properties */
 499         dev_dbg(cl_data_to_dev(client_data),
 500                 "ish_fw_version: major=%d minor=%d hotfix=%d build=%d protocol_version=0x%x loader_version=%d\n",
 501                 fw_info->ish_fw_version.major,
 502                 fw_info->ish_fw_version.minor,
 503                 fw_info->ish_fw_version.hotfix,
 504                 fw_info->ish_fw_version.build,
 505                 fw_info->protocol_version,
 506                 fw_info->ldr_version.value);
 507
 508         dev_dbg(cl_data_to_dev(client_data),
 509                 "loader_capability: max_fw_image_size=0x%x xfer_mode=%d max_dma_buf_size=0x%x dma_buf_size_limit=0x%x\n",
 510                 fw_info->ldr_capability.max_fw_image_size,
 511                 fw_info->ldr_capability.xfer_mode,
 512                 fw_info->ldr_capability.max_dma_buf_size,
 513                 dma_buf_size_limit);
 514
 515         /* Sanity checks */
 516         if (fw_info->ldr_capability.max_fw_image_size < fw->size) {
 517                 dev_err(cl_data_to_dev(client_data),
 518                         "ISH firmware size %zu is greater than Shim firmware loader max supported %d\n",
 519                         fw->size,
 520                         fw_info->ldr_capability.max_fw_image_size);
 521                 return -ENOSPC;
 522         }
 523
 524         /* For DMA the buffer size should be multiple of cacheline size */
 525         if ((fw_info->ldr_capability.xfer_mode & LOADER_XFER_MODE_DIRECT_DMA) &&
 526             (fw_info->ldr_capability.max_dma_buf_size % L1_CACHE_BYTES)) {
 527                 dev_err(cl_data_to_dev(client_data),
 528                         "Shim firmware loader buffer size %d should be multiple of cacheline\n",
 529                         fw_info->ldr_capability.max_dma_buf_size);
 530                 return -EINVAL;
 531         }
 532
 533         return 0;
 534 }
 535
 536 /**
 537  * ish_fw_xfer_ishtp()  Loads ISH firmware using ishtp interface
 538  * @client_data:        Client data instance
 539  * @fw:                 Pointer to firmware data struct in host memory
 540  *
 541  * This function uses ISH-TP to transfer ISH firmware from host to
 542  * ISH SRAM. Lower layers may use IPC or DMA depending on firmware
 543  * support.
 544  *
 545  * Return: 0 for success, negative error code for failure.
 546  */
 547 static int ish_fw_xfer_ishtp(struct ishtp_cl_data *client_data,
 548                              const struct firmware *fw)
 549 {
 550         int rv;
 551         u32 fragment_offset, fragment_size, payload_max_size;
 552         struct loader_xfer_ipc_fragment *ldr_xfer_ipc_frag;
 553         struct loader_msg_hdr ldr_xfer_ipc_ack;
 554
 555         payload_max_size =
 556                 LOADER_SHIM_IPC_BUF_SIZE - IPC_FRAGMENT_DATA_PREAMBLE;
 557
 558         ldr_xfer_ipc_frag = kzalloc(LOADER_SHIM_IPC_BUF_SIZE, GFP_KERNEL);
 559         if (!ldr_xfer_ipc_frag) {
 560                 client_data->flag_retry = true;
 561                 return -ENOMEM;
 562         }
 563
 564         ldr_xfer_ipc_frag->fragment.hdr.command = LOADER_CMD_XFER_FRAGMENT;
 565         ldr_xfer_ipc_frag->fragment.xfer_mode = LOADER_XFER_MODE_ISHTP;
 566
 567         /* Break the firmware image into fragments and send as ISH-TP payload */
 568         fragment_offset = 0;
 569         while (fragment_offset < fw->size) {
 570                 if (fragment_offset + payload_max_size < fw->size) {
 571                         fragment_size = payload_max_size;
 572                         ldr_xfer_ipc_frag->fragment.is_last = 0;
 573                 } else {
 574                         fragment_size = fw->size - fragment_offset;
 575                         ldr_xfer_ipc_frag->fragment.is_last = 1;
 576                 }
 577
 578                 ldr_xfer_ipc_frag->fragment.offset = fragment_offset;
 579                 ldr_xfer_ipc_frag->fragment.size = fragment_size;
 580                 memcpy(ldr_xfer_ipc_frag->data,
 581                        &fw->data[fragment_offset],
 582                        fragment_size);
 583
 584                 dev_dbg(cl_data_to_dev(client_data),
 585                         "xfer_mode=ipc offset=0x%08x size=0x%08x is_last=%d\n",
 586                         ldr_xfer_ipc_frag->fragment.offset,
 587                         ldr_xfer_ipc_frag->fragment.size,
 588                         ldr_xfer_ipc_frag->fragment.is_last);
 589
 590                 rv = loader_cl_send(client_data,
 591                                     (u8 *)ldr_xfer_ipc_frag,
 592                                     IPC_FRAGMENT_DATA_PREAMBLE + fragment_size,
 593                                     (u8 *)&ldr_xfer_ipc_ack,
 594                                     sizeof(ldr_xfer_ipc_ack));
 595                 if (rv < 0) {
 596                         client_data->flag_retry = true;
 597                         goto end_err_resp_buf_release;
 598                 }
 599
 600                 fragment_offset += fragment_size;
 601         }
 602
 603         kfree(ldr_xfer_ipc_frag);
 604         return 0;
 605
 606 end_err_resp_buf_release:
 607         /* Free ISH buffer if not done already, in error case */
 608         kfree(ldr_xfer_ipc_frag);
 609         return rv;
 610 }
 611
 612 /**
 613  * ish_fw_xfer_direct_dma() - Loads ISH firmware using direct dma
 614  * @client_data:        Client data instance
 615  * @fw:                 Pointer to firmware data struct in host memory
 616  * @fw_info:            Loader firmware properties
 617  *
 618  * Host firmware load is a unique case where we need to download
 619  * a large firmware image (200+ Kb). This function implements
 620  * direct DMA transfer in kernel and ISH firmware. This allows
 621  * us to overcome the ISH-TP 4 Kb limit, and allows us to DMA
 622  * directly to ISH UMA at location of choice.
 623  * Function depends on corresponding support in ISH firmware.
 624  *
 625  * Return: 0 for success, negative error code for failure.
 626  */
 627 static int ish_fw_xfer_direct_dma(struct ishtp_cl_data *client_data,
 628                                   const struct firmware *fw,
 629                                   const struct shim_fw_info fw_info)
 630 {
 631         int rv;
 632         void *dma_buf;
 633         dma_addr_t dma_buf_phy;
 634         u32 fragment_offset, fragment_size, payload_max_size;
 635         struct loader_msg_hdr ldr_xfer_dma_frag_ack;
 636         struct loader_xfer_dma_fragment ldr_xfer_dma_frag;
 637         struct device *devc = ishtp_get_pci_device(client_data->cl_device);
 638         u32 shim_fw_buf_size =
 639                 fw_info.ldr_capability.max_dma_buf_size;
 640
 641         /*
 642          * payload_max_size should be set to minimum of
 643          *  (1) Size of firmware to be loaded,
 644          *  (2) Max DMA buffer size supported by Shim firmware,
 645          *  (3) DMA buffer size limit set by boot_param dma_buf_size_limit.
 646          */
 647         payload_max_size = min3(fw->size,
 648                                 (size_t)shim_fw_buf_size,
 649                                 (size_t)dma_buf_size_limit);
 650
 651         /*
 652          * Buffer size should be multiple of cacheline size
 653          * if it's not, select the previous cacheline boundary.
 654          */
 655         payload_max_size &= ~(L1_CACHE_BYTES - 1);
 656
 657         dma_buf = kmalloc(payload_max_size, GFP_KERNEL | GFP_DMA32);
 658         if (!dma_buf) {
 659                 client_data->flag_retry = true;
 660                 return -ENOMEM;
 661         }
 662
 663         dma_buf_phy = dma_map_single(devc, dma_buf, payload_max_size,
 664                                      DMA_TO_DEVICE);
 665         if (dma_mapping_error(devc, dma_buf_phy)) {
 666                 dev_err(cl_data_to_dev(client_data), "DMA map failed\n");
 667                 client_data->flag_retry = true;
 668                 rv = -ENOMEM;
 669                 goto end_err_dma_buf_release;
 670         }
 671
 672         ldr_xfer_dma_frag.fragment.hdr.command = LOADER_CMD_XFER_FRAGMENT;
 673         ldr_xfer_dma_frag.fragment.xfer_mode = LOADER_XFER_MODE_DIRECT_DMA;
 674         ldr_xfer_dma_frag.ddr_phys_addr = (u64)dma_buf_phy;
 675
 676         /* Send the firmware image in chucks of payload_max_size */
 677         fragment_offset = 0;
 678         while (fragment_offset < fw->size) {
 679                 if (fragment_offset + payload_max_size < fw->size) {
 680                         fragment_size = payload_max_size;
 681                         ldr_xfer_dma_frag.fragment.is_last = 0;
 682                 } else {
 683                         fragment_size = fw->size - fragment_offset;
 684                         ldr_xfer_dma_frag.fragment.is_last = 1;
 685                 }
 686
 687                 ldr_xfer_dma_frag.fragment.offset = fragment_offset;
 688                 ldr_xfer_dma_frag.fragment.size = fragment_size;
 689                 memcpy(dma_buf, &fw->data[fragment_offset], fragment_size);
 690
 691                 dma_sync_single_for_device(devc, dma_buf_phy,
 692                                            payload_max_size,
 693                                            DMA_TO_DEVICE);
 694
 695                 /*
 696                  * Flush cache here because the dma_sync_single_for_device()
 697                  * does not do for x86.
 698                  */
 699                 clflush_cache_range(dma_buf, payload_max_size);
 700
 701                 dev_dbg(cl_data_to_dev(client_data),
 702                         "xfer_mode=dma offset=0x%08x size=0x%x is_last=%d ddr_phys_addr=0x%016llx\n",
 703                         ldr_xfer_dma_frag.fragment.offset,
 704                         ldr_xfer_dma_frag.fragment.size,
 705                         ldr_xfer_dma_frag.fragment.is_last,
 706                         ldr_xfer_dma_frag.ddr_phys_addr);
 707
 708                 rv = loader_cl_send(client_data,
 709                                     (u8 *)&ldr_xfer_dma_frag,
 710                                     sizeof(ldr_xfer_dma_frag),
 711                                     (u8 *)&ldr_xfer_dma_frag_ack,
 712                                     sizeof(ldr_xfer_dma_frag_ack));
 713                 if (rv < 0) {
 714                         client_data->flag_retry = true;
 715                         goto end_err_resp_buf_release;
 716                 }
 717
 718                 fragment_offset += fragment_size;
 719         }
 720
 721         dma_unmap_single(devc, dma_buf_phy, payload_max_size, DMA_TO_DEVICE);
 722         kfree(dma_buf);
 723         return 0;
 724
 725 end_err_resp_buf_release:
 726         /* Free ISH buffer if not done already, in error case */
 727         dma_unmap_single(devc, dma_buf_phy, payload_max_size, DMA_TO_DEVICE);
 728 end_err_dma_buf_release:
 729         kfree(dma_buf);
 730         return rv;
 731 }
 732
 733 /**
 734  * ish_fw_start()       Start executing ISH main firmware
 735  * @client_data:        client data instance
 736  *
 737  * This function sends message to Shim firmware loader to start
 738  * the execution of ISH main firmware.
 739  *
 740  * Return: 0 for success, negative error code for failure.
 741  */
 742 static int ish_fw_start(struct ishtp_cl_data *client_data)
 743 {
 744         struct loader_start ldr_start;
 745         struct loader_msg_hdr ldr_start_ack;
 746
 747         memset(&ldr_start, 0, sizeof(ldr_start));
 748         ldr_start.hdr.command = LOADER_CMD_START;
 749         return loader_cl_send(client_data,
 750                             (u8 *)&ldr_start,
 751                             sizeof(ldr_start),
 752                             (u8 *)&ldr_start_ack,
 753                             sizeof(ldr_start_ack));
 754 }
 755
 756 /**
 757  * load_fw_from_host()  Loads ISH firmware from host
 758  * @client_data:        Client data instance
 759  *
 760  * This function loads the ISH firmware to ISH SRAM and starts execution
 761  *
 762  * Return: 0 for success, negative error code for failure.
 763  */
 764 static int load_fw_from_host(struct ishtp_cl_data *client_data)
 765 {
 766         int rv;
 767         u32 xfer_mode;
 768         char *filename;
 769         const struct firmware *fw;
 770         struct shim_fw_info fw_info;
 771         struct ishtp_cl *loader_ishtp_cl = client_data->loader_ishtp_cl;
 772
 773         client_data->flag_retry = false;
 774
 775         filename = kzalloc(FILENAME_SIZE, GFP_KERNEL);
 776         if (!filename) {
 777                 client_data->flag_retry = true;
 778                 rv = -ENOMEM;
 779                 goto end_error;
 780         }
 781
 782         /* Get filename of the ISH firmware to be loaded */
 783         rv = get_firmware_variant(client_data, filename);
 784         if (rv < 0)
 785                 goto end_err_filename_buf_release;
 786
 787         rv = request_firmware(&fw, filename, cl_data_to_dev(client_data));
 788         if (rv < 0)
 789                 goto end_err_filename_buf_release;
 790
 791         /* Step 1: Query Shim firmware loader properties */
 792
 793         rv = ish_query_loader_prop(client_data, fw, &fw_info);
 794         if (rv < 0)
 795                 goto end_err_fw_release;
 796
 797         /* Step 2: Send the main firmware image to be loaded, to ISH SRAM */
 798
 799         xfer_mode = fw_info.ldr_capability.xfer_mode;
 800         if (xfer_mode & LOADER_XFER_MODE_DIRECT_DMA) {
 801                 rv = ish_fw_xfer_direct_dma(client_data, fw, fw_info);
 802         } else if (xfer_mode & LOADER_XFER_MODE_ISHTP) {
 803                 rv = ish_fw_xfer_ishtp(client_data, fw);
 804         } else {
 805                 dev_err(cl_data_to_dev(client_data),
 806                         "No transfer mode selected in firmware\n");
 807                 rv = -EINVAL;
 808         }
 809         if (rv < 0)
 810                 goto end_err_fw_release;
 811
 812         /* Step 3: Start ISH main firmware exeuction */
 813
 814         rv = ish_fw_start(client_data);
 815         if (rv < 0)
 816                 goto end_err_fw_release;
 817
 818         release_firmware(fw);
 819         kfree(filename);
 820         dev_info(cl_data_to_dev(client_data), "ISH firmware %s loaded\n",
 821                  filename);
 822         return 0;
 823
 824 end_err_fw_release:
 825         release_firmware(fw);
 826 end_err_filename_buf_release:
 827         kfree(filename);
 828 end_error:
 829         /* Keep a count of retries, and give up after 3 attempts */
 830         if (client_data->flag_retry &&
 831             client_data->retry_count++ < MAX_LOAD_ATTEMPTS) {
 832                 dev_warn(cl_data_to_dev(client_data),
 833                          "ISH host firmware load failed %d. Resetting ISH, and trying again..\n",
 834                          rv);
 835                 ish_hw_reset(ishtp_get_ishtp_device(loader_ishtp_cl));
 836         } else {
 837                 dev_err(cl_data_to_dev(client_data),
 838                         "ISH host firmware load failed %d\n", rv);
 839         }
 840         return rv;
 841 }
 842
 843 static void load_fw_from_host_handler(struct work_struct *work)
 844 {
 845         struct ishtp_cl_data *client_data;
 846
 847         client_data = container_of(work, struct ishtp_cl_data,
 848                                    work_fw_load);
 849         load_fw_from_host(client_data);
 850 }
 851
 852 /**
 853  * loader_init() -      Init function for ISH-TP client
 854  * @loader_ishtp_cl:    ISH-TP client instance
 855  * @reset:              true if called for init after reset
 856  *
 857  * Return: 0 for success, negative error code for failure
 858  */
 859 static int loader_init(struct ishtp_cl *loader_ishtp_cl, int reset)
 860 {
 861         int rv;
 862         struct ishtp_fw_client *fw_client;
 863         struct ishtp_cl_data *client_data =
 864                 ishtp_get_client_data(loader_ishtp_cl);
 865
 866         dev_dbg(cl_data_to_dev(client_data), "reset flag: %d\n", reset);
 867
 868         rv = ishtp_cl_link(loader_ishtp_cl);
 869         if (rv < 0) {
 870                 dev_err(cl_data_to_dev(client_data), "ishtp_cl_link failed\n");
 871                 return rv;
 872         }
 873
 874         /* Connect to firmware client */
 875         ishtp_set_tx_ring_size(loader_ishtp_cl, LOADER_CL_TX_RING_SIZE);
 876         ishtp_set_rx_ring_size(loader_ishtp_cl, LOADER_CL_RX_RING_SIZE);
 877
 878         fw_client =
 879                 ishtp_fw_cl_get_client(ishtp_get_ishtp_device(loader_ishtp_cl),
 880                                        &loader_ishtp_guid);
 881         if (!fw_client) {
 882                 dev_err(cl_data_to_dev(client_data),
 883                         "ISH client uuid not found\n");
 884                 rv = -ENOENT;
 885                 goto err_cl_unlink;
 886         }
 887
 888         ishtp_cl_set_fw_client_id(loader_ishtp_cl,
 889                                   ishtp_get_fw_client_id(fw_client));
 890         ishtp_set_connection_state(loader_ishtp_cl, ISHTP_CL_CONNECTING);
 891
 892         rv = ishtp_cl_connect(loader_ishtp_cl);
 893         if (rv < 0) {
 894                 dev_err(cl_data_to_dev(client_data), "Client connect fail\n");
 895                 goto err_cl_unlink;
 896         }
 897
 898         dev_dbg(cl_data_to_dev(client_data), "Client connected\n");
 899
 900         ishtp_register_event_cb(client_data->cl_device, loader_cl_event_cb);
 901
 902         return 0;
 903
 904 err_cl_unlink:
 905         ishtp_cl_unlink(loader_ishtp_cl);
 906         return rv;
 907 }
 908
 909 static void loader_deinit(struct ishtp_cl *loader_ishtp_cl)
 910 {
 911         ishtp_set_connection_state(loader_ishtp_cl, ISHTP_CL_DISCONNECTING);
 912         ishtp_cl_disconnect(loader_ishtp_cl);
 913         ishtp_cl_unlink(loader_ishtp_cl);
 914         ishtp_cl_flush_queues(loader_ishtp_cl);
 915
 916         /* Disband and free all Tx and Rx client-level rings */
 917         ishtp_cl_free(loader_ishtp_cl);
 918 }
 919
 920 static void reset_handler(struct work_struct *work)
 921 {
 922         int rv;
 923         struct ishtp_cl_data *client_data;
 924         struct ishtp_cl *loader_ishtp_cl;
 925         struct ishtp_cl_device *cl_device;
 926
 927         client_data = container_of(work, struct ishtp_cl_data,
 928                                    work_ishtp_reset);
 929
 930         loader_ishtp_cl = client_data->loader_ishtp_cl;
 931         cl_device = client_data->cl_device;
 932
 933         /* Unlink, flush queues & start again */
 934         ishtp_cl_unlink(loader_ishtp_cl);
 935         ishtp_cl_flush_queues(loader_ishtp_cl);
 936         ishtp_cl_free(loader_ishtp_cl);
 937
 938         loader_ishtp_cl = ishtp_cl_allocate(cl_device);
 939         if (!loader_ishtp_cl)
 940                 return;
 941
 942         ishtp_set_drvdata(cl_device, loader_ishtp_cl);
 943         ishtp_set_client_data(loader_ishtp_cl, client_data);
 944         client_data->loader_ishtp_cl = loader_ishtp_cl;
 945         client_data->cl_device = cl_device;
 946
 947         rv = loader_init(loader_ishtp_cl, 1);
 948         if (rv < 0) {
 949                 dev_err(ishtp_device(cl_device), "Reset Failed\n");
 950                 return;
 951         }
 952
 953         /* ISH firmware loading from host */
 954         load_fw_from_host(client_data);
 955 }
 956
 957 /**
 958  * loader_ishtp_cl_probe() - ISH-TP client driver probe
 959  * @cl_device:          ISH-TP client device instance
 960  *
 961  * This function gets called on device create on ISH-TP bus
 962  *
 963  * Return: 0 for success, negative error code for failure
 964  */
 965 static int loader_ishtp_cl_probe(struct ishtp_cl_device *cl_device)
 966 {
 967         struct ishtp_cl *loader_ishtp_cl;
 968         struct ishtp_cl_data *client_data;
 969         int rv;
 970
 971         client_data = devm_kzalloc(ishtp_device(cl_device),
 972                                    sizeof(*client_data),
 973                                    GFP_KERNEL);
 974         if (!client_data)
 975                 return -ENOMEM;
 976
 977         loader_ishtp_cl = ishtp_cl_allocate(cl_device);
 978         if (!loader_ishtp_cl)
 979                 return -ENOMEM;
 980
 981         ishtp_set_drvdata(cl_device, loader_ishtp_cl);
 982         ishtp_set_client_data(loader_ishtp_cl, client_data);
 983         client_data->loader_ishtp_cl = loader_ishtp_cl;
 984         client_data->cl_device = cl_device;
 985
 986         init_waitqueue_head(&client_data->response.wait_queue);
 987
 988         INIT_WORK(&client_data->work_ishtp_reset,
 989                   reset_handler);
 990         INIT_WORK(&client_data->work_fw_load,
 991                   load_fw_from_host_handler);
 992
 993         rv = loader_init(loader_ishtp_cl, 0);
 994         if (rv < 0) {
 995                 ishtp_cl_free(loader_ishtp_cl);
 996                 return rv;
 997         }
 998         ishtp_get_device(cl_device);
 999
1000         client_data->retry_count = 0;
1001
1002         /* ISH firmware loading from host */
1003         schedule_work(&client_data->work_fw_load);
1004
1005         return 0;
1006 }
1007
1008 /**
1009  * loader_ishtp_cl_remove() - ISH-TP client driver remove
1010  * @cl_device:          ISH-TP client device instance
1011  *
1012  * This function gets called on device remove on ISH-TP bus
1013  *
1014  * Return: 0
1015  */
1016 static int loader_ishtp_cl_remove(struct ishtp_cl_device *cl_device)
1017 {
1018         struct ishtp_cl_data *client_data;
1019         struct ishtp_cl *loader_ishtp_cl = ishtp_get_drvdata(cl_device);
1020
1021         client_data = ishtp_get_client_data(loader_ishtp_cl);
1022
1023         /*
1024          * The sequence of the following two cancel_work_sync() is
1025          * important. The work_fw_load can in turn schedue
1026          * work_ishtp_reset, so first cancel work_fw_load then
1027          * cancel work_ishtp_reset.
1028          */
1029         cancel_work_sync(&client_data->work_fw_load);
1030         cancel_work_sync(&client_data->work_ishtp_reset);
1031         loader_deinit(loader_ishtp_cl);
1032         ishtp_put_device(cl_device);
1033
1034         return 0;
1035 }
1036
1037 /**
1038  * loader_ishtp_cl_reset() - ISH-TP client driver reset
1039  * @cl_device:          ISH-TP client device instance
1040  *
1041  * This function gets called on device reset on ISH-TP bus
1042  *
1043  * Return: 0
1044  */
1045 static int loader_ishtp_cl_reset(struct ishtp_cl_device *cl_device)
1046 {
1047         struct ishtp_cl_data *client_data;
1048         struct ishtp_cl *loader_ishtp_cl = ishtp_get_drvdata(cl_device);
1049
1050         client_data = ishtp_get_client_data(loader_ishtp_cl);
1051
1052         schedule_work(&client_data->work_ishtp_reset);
1053
1054         return 0;
1055 }
1056
1057 static struct ishtp_cl_driver   loader_ishtp_cl_driver = {
1058         .name = "ish-loader",
1059         .guid = &loader_ishtp_guid,
1060         .probe = loader_ishtp_cl_probe,
1061         .remove = loader_ishtp_cl_remove,
1062         .reset = loader_ishtp_cl_reset,
1063 };
1064
1065 static int __init ish_loader_init(void)
1066 {
1067         return ishtp_cl_driver_register(&loader_ishtp_cl_driver, THIS_MODULE);
1068 }
1069
1070 static void __exit ish_loader_exit(void)
1071 {
1072         ishtp_cl_driver_unregister(&loader_ishtp_cl_driver);
1073 }
1074
1075 late_initcall(ish_loader_init);
1076 module_exit(ish_loader_exit);
1077
1078 module_param(dma_buf_size_limit, int, 0644);
1079 MODULE_PARM_DESC(dma_buf_size_limit, "Limit the DMA buf size to this value in bytes");
1080
1081 MODULE_DESCRIPTION("ISH ISH-TP Host firmware Loader Client Driver");
1082 MODULE_AUTHOR("Rushikesh S Kadam <rushikesh.s.kadam@intel.com>");
1083
1084 MODULE_LICENSE("GPL v2");
1085 MODULE_ALIAS("ishtp:*");