2 * Copyright (C) 2015 Free Electrons
3 * Copyright (C) 2015 NextThing Co
5 * Maxime Ripard <maxime.ripard@free-electrons.com>
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
14 #include <drm/drm_atomic_helper.h>
15 #include <drm/drm_crtc.h>
16 #include <drm/drm_crtc_helper.h>
17 #include <drm/drm_encoder.h>
18 #include <drm/drm_modes.h>
19 #include <drm/drm_of.h>
21 #include <uapi/drm/drm_mode.h>
23 #include <linux/component.h>
24 #include <linux/ioport.h>
25 #include <linux/of_address.h>
26 #include <linux/of_device.h>
27 #include <linux/of_irq.h>
28 #include <linux/regmap.h>
29 #include <linux/reset.h>
31 #include "sun4i_crtc.h"
32 #include "sun4i_dotclock.h"
33 #include "sun4i_drv.h"
34 #include "sun4i_lvds.h"
35 #include "sun4i_rgb.h"
36 #include "sun4i_tcon.h"
37 #include "sunxi_engine.h"
39 static struct drm_connector *sun4i_tcon_get_connector(const struct drm_encoder *encoder)
41 struct drm_connector *connector;
42 struct drm_connector_list_iter iter;
44 drm_connector_list_iter_begin(encoder->dev, &iter);
45 drm_for_each_connector_iter(connector, &iter)
46 if (connector->encoder == encoder) {
47 drm_connector_list_iter_end(&iter);
50 drm_connector_list_iter_end(&iter);
55 static int sun4i_tcon_get_pixel_depth(const struct drm_encoder *encoder)
57 struct drm_connector *connector;
58 struct drm_display_info *info;
60 connector = sun4i_tcon_get_connector(encoder);
64 info = &connector->display_info;
65 if (info->num_bus_formats != 1)
68 switch (info->bus_formats[0]) {
69 case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
72 case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
73 case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
80 static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel,
87 WARN_ON(!tcon->quirks->has_channel_0);
88 regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
89 SUN4I_TCON0_CTL_TCON_ENABLE,
90 enabled ? SUN4I_TCON0_CTL_TCON_ENABLE : 0);
94 WARN_ON(!tcon->quirks->has_channel_1);
95 regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
96 SUN4I_TCON1_CTL_TCON_ENABLE,
97 enabled ? SUN4I_TCON1_CTL_TCON_ENABLE : 0);
101 DRM_WARN("Unknown channel... doing nothing\n");
106 clk_prepare_enable(clk);
108 clk_disable_unprepare(clk);
111 static void sun4i_tcon_lvds_set_status(struct sun4i_tcon *tcon,
112 const struct drm_encoder *encoder,
118 regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG,
119 SUN4I_TCON0_LVDS_IF_EN,
120 SUN4I_TCON0_LVDS_IF_EN);
123 * As their name suggest, these values only apply to the A31
124 * and later SoCs. We'll have to rework this when merging
125 * support for the older SoCs.
127 regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
128 SUN6I_TCON0_LVDS_ANA0_C(2) |
129 SUN6I_TCON0_LVDS_ANA0_V(3) |
130 SUN6I_TCON0_LVDS_ANA0_PD(2) |
131 SUN6I_TCON0_LVDS_ANA0_EN_LDO);
134 regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
135 SUN6I_TCON0_LVDS_ANA0_EN_MB,
136 SUN6I_TCON0_LVDS_ANA0_EN_MB);
139 regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
140 SUN6I_TCON0_LVDS_ANA0_EN_DRVC,
141 SUN6I_TCON0_LVDS_ANA0_EN_DRVC);
143 if (sun4i_tcon_get_pixel_depth(encoder) == 18)
148 regmap_write_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
149 SUN6I_TCON0_LVDS_ANA0_EN_DRVD(0xf),
150 SUN6I_TCON0_LVDS_ANA0_EN_DRVD(val));
152 regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG,
153 SUN4I_TCON0_LVDS_IF_EN, 0);
157 void sun4i_tcon_set_status(struct sun4i_tcon *tcon,
158 const struct drm_encoder *encoder,
161 bool is_lvds = false;
164 switch (encoder->encoder_type) {
165 case DRM_MODE_ENCODER_LVDS:
168 case DRM_MODE_ENCODER_NONE:
171 case DRM_MODE_ENCODER_TMDS:
172 case DRM_MODE_ENCODER_TVDAC:
176 DRM_DEBUG_DRIVER("Unknown encoder type, doing nothing...\n");
180 if (is_lvds && !enabled)
181 sun4i_tcon_lvds_set_status(tcon, encoder, false);
183 regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
184 SUN4I_TCON_GCTL_TCON_ENABLE,
185 enabled ? SUN4I_TCON_GCTL_TCON_ENABLE : 0);
187 if (is_lvds && enabled)
188 sun4i_tcon_lvds_set_status(tcon, encoder, true);
190 sun4i_tcon_channel_set_status(tcon, channel, enabled);
193 void sun4i_tcon_enable_vblank(struct sun4i_tcon *tcon, bool enable)
197 DRM_DEBUG_DRIVER("%sabling VBLANK interrupt\n", enable ? "En" : "Dis");
199 mask = SUN4I_TCON_GINT0_VBLANK_ENABLE(0) |
200 SUN4I_TCON_GINT0_VBLANK_ENABLE(1);
205 regmap_update_bits(tcon->regs, SUN4I_TCON_GINT0_REG, mask, val);
207 EXPORT_SYMBOL(sun4i_tcon_enable_vblank);
210 * This function is a helper for TCON output muxing. The TCON output
211 * muxing control register in earlier SoCs (without the TCON TOP block)
212 * are located in TCON0. This helper returns a pointer to TCON0's
213 * sun4i_tcon structure, or NULL if not found.
215 static struct sun4i_tcon *sun4i_get_tcon0(struct drm_device *drm)
217 struct sun4i_drv *drv = drm->dev_private;
218 struct sun4i_tcon *tcon;
220 list_for_each_entry(tcon, &drv->tcon_list, list)
225 "TCON0 not found, display output muxing may not work\n");
230 void sun4i_tcon_set_mux(struct sun4i_tcon *tcon, int channel,
231 const struct drm_encoder *encoder)
235 if (tcon->quirks->set_mux)
236 ret = tcon->quirks->set_mux(tcon, encoder);
238 DRM_DEBUG_DRIVER("Muxing encoder %s to CRTC %s: %d\n",
239 encoder->name, encoder->crtc->name, ret);
242 static int sun4i_tcon_get_clk_delay(const struct drm_display_mode *mode,
245 int delay = mode->vtotal - mode->vdisplay;
247 if (mode->flags & DRM_MODE_FLAG_INTERLACE)
253 delay = min(delay, 30);
255 DRM_DEBUG_DRIVER("TCON %d clock delay %u\n", channel, delay);
260 static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
261 const struct drm_display_mode *mode)
263 /* Configure the dot clock */
264 clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
266 /* Set the resolution */
267 regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
268 SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
269 SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
272 static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
273 const struct drm_encoder *encoder,
274 const struct drm_display_mode *mode)
280 WARN_ON(!tcon->quirks->has_channel_0);
282 tcon->dclk_min_div = 7;
283 tcon->dclk_max_div = 7;
284 sun4i_tcon0_mode_set_common(tcon, mode);
286 /* Adjust clock delay */
287 clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
288 regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
289 SUN4I_TCON0_CTL_CLK_DELAY_MASK,
290 SUN4I_TCON0_CTL_CLK_DELAY(clk_delay));
293 * This is called a backporch in the register documentation,
294 * but it really is the back porch + hsync
296 bp = mode->crtc_htotal - mode->crtc_hsync_start;
297 DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
298 mode->crtc_htotal, bp);
300 /* Set horizontal display timings */
301 regmap_write(tcon->regs, SUN4I_TCON0_BASIC1_REG,
302 SUN4I_TCON0_BASIC1_H_TOTAL(mode->htotal) |
303 SUN4I_TCON0_BASIC1_H_BACKPORCH(bp));
306 * This is called a backporch in the register documentation,
307 * but it really is the back porch + hsync
309 bp = mode->crtc_vtotal - mode->crtc_vsync_start;
310 DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
311 mode->crtc_vtotal, bp);
313 /* Set vertical display timings */
314 regmap_write(tcon->regs, SUN4I_TCON0_BASIC2_REG,
315 SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) |
316 SUN4I_TCON0_BASIC2_V_BACKPORCH(bp));
318 reg = SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 |
319 SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL |
320 SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL;
321 if (sun4i_tcon_get_pixel_depth(encoder) == 24)
322 reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS;
324 reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_18BITS;
326 regmap_write(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, reg);
328 /* Setup the polarity of the various signals */
329 if (!(mode->flags & DRM_MODE_FLAG_PHSYNC))
330 val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE;
332 if (!(mode->flags & DRM_MODE_FLAG_PVSYNC))
333 val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
335 regmap_write(tcon->regs, SUN4I_TCON0_IO_POL_REG, val);
337 /* Map output pins to channel 0 */
338 regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
339 SUN4I_TCON_GCTL_IOMAP_MASK,
340 SUN4I_TCON_GCTL_IOMAP_TCON0);
343 static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
344 const struct drm_display_mode *mode)
346 unsigned int bp, hsync, vsync;
350 WARN_ON(!tcon->quirks->has_channel_0);
352 tcon->dclk_min_div = 6;
353 tcon->dclk_max_div = 127;
354 sun4i_tcon0_mode_set_common(tcon, mode);
356 /* Adjust clock delay */
357 clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
358 regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
359 SUN4I_TCON0_CTL_CLK_DELAY_MASK,
360 SUN4I_TCON0_CTL_CLK_DELAY(clk_delay));
363 * This is called a backporch in the register documentation,
364 * but it really is the back porch + hsync
366 bp = mode->crtc_htotal - mode->crtc_hsync_start;
367 DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
368 mode->crtc_htotal, bp);
370 /* Set horizontal display timings */
371 regmap_write(tcon->regs, SUN4I_TCON0_BASIC1_REG,
372 SUN4I_TCON0_BASIC1_H_TOTAL(mode->crtc_htotal) |
373 SUN4I_TCON0_BASIC1_H_BACKPORCH(bp));
376 * This is called a backporch in the register documentation,
377 * but it really is the back porch + hsync
379 bp = mode->crtc_vtotal - mode->crtc_vsync_start;
380 DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
381 mode->crtc_vtotal, bp);
383 /* Set vertical display timings */
384 regmap_write(tcon->regs, SUN4I_TCON0_BASIC2_REG,
385 SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) |
386 SUN4I_TCON0_BASIC2_V_BACKPORCH(bp));
388 /* Set Hsync and Vsync length */
389 hsync = mode->crtc_hsync_end - mode->crtc_hsync_start;
390 vsync = mode->crtc_vsync_end - mode->crtc_vsync_start;
391 DRM_DEBUG_DRIVER("Setting HSYNC %d, VSYNC %d\n", hsync, vsync);
392 regmap_write(tcon->regs, SUN4I_TCON0_BASIC3_REG,
393 SUN4I_TCON0_BASIC3_V_SYNC(vsync) |
394 SUN4I_TCON0_BASIC3_H_SYNC(hsync));
396 /* Setup the polarity of the various signals */
397 if (mode->flags & DRM_MODE_FLAG_PHSYNC)
398 val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE;
400 if (mode->flags & DRM_MODE_FLAG_PVSYNC)
401 val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
403 regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG,
404 SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE,
407 /* Map output pins to channel 0 */
408 regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
409 SUN4I_TCON_GCTL_IOMAP_MASK,
410 SUN4I_TCON_GCTL_IOMAP_TCON0);
412 /* Enable the output on the pins */
413 regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0);
416 static void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
417 const struct drm_display_mode *mode)
419 unsigned int bp, hsync, vsync, vtotal;
423 WARN_ON(!tcon->quirks->has_channel_1);
425 /* Configure the dot clock */
426 clk_set_rate(tcon->sclk1, mode->crtc_clock * 1000);
428 /* Adjust clock delay */
429 clk_delay = sun4i_tcon_get_clk_delay(mode, 1);
430 regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
431 SUN4I_TCON1_CTL_CLK_DELAY_MASK,
432 SUN4I_TCON1_CTL_CLK_DELAY(clk_delay));
434 /* Set interlaced mode */
435 if (mode->flags & DRM_MODE_FLAG_INTERLACE)
436 val = SUN4I_TCON1_CTL_INTERLACE_ENABLE;
439 regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
440 SUN4I_TCON1_CTL_INTERLACE_ENABLE,
443 /* Set the input resolution */
444 regmap_write(tcon->regs, SUN4I_TCON1_BASIC0_REG,
445 SUN4I_TCON1_BASIC0_X(mode->crtc_hdisplay) |
446 SUN4I_TCON1_BASIC0_Y(mode->crtc_vdisplay));
448 /* Set the upscaling resolution */
449 regmap_write(tcon->regs, SUN4I_TCON1_BASIC1_REG,
450 SUN4I_TCON1_BASIC1_X(mode->crtc_hdisplay) |
451 SUN4I_TCON1_BASIC1_Y(mode->crtc_vdisplay));
453 /* Set the output resolution */
454 regmap_write(tcon->regs, SUN4I_TCON1_BASIC2_REG,
455 SUN4I_TCON1_BASIC2_X(mode->crtc_hdisplay) |
456 SUN4I_TCON1_BASIC2_Y(mode->crtc_vdisplay));
458 /* Set horizontal display timings */
459 bp = mode->crtc_htotal - mode->crtc_hsync_start;
460 DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
462 regmap_write(tcon->regs, SUN4I_TCON1_BASIC3_REG,
463 SUN4I_TCON1_BASIC3_H_TOTAL(mode->crtc_htotal) |
464 SUN4I_TCON1_BASIC3_H_BACKPORCH(bp));
466 bp = mode->crtc_vtotal - mode->crtc_vsync_start;
467 DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
468 mode->crtc_vtotal, bp);
471 * The vertical resolution needs to be doubled in all
472 * cases. We could use crtc_vtotal and always multiply by two,
473 * but that leads to a rounding error in interlace when vtotal
476 * This happens with TV's PAL for example, where vtotal will
477 * be 625, crtc_vtotal 312, and thus crtc_vtotal * 2 will be
478 * 624, which apparently confuses the hardware.
480 * To work around this, we will always use vtotal, and
481 * multiply by two only if we're not in interlace.
483 vtotal = mode->vtotal;
484 if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
487 /* Set vertical display timings */
488 regmap_write(tcon->regs, SUN4I_TCON1_BASIC4_REG,
489 SUN4I_TCON1_BASIC4_V_TOTAL(vtotal) |
490 SUN4I_TCON1_BASIC4_V_BACKPORCH(bp));
492 /* Set Hsync and Vsync length */
493 hsync = mode->crtc_hsync_end - mode->crtc_hsync_start;
494 vsync = mode->crtc_vsync_end - mode->crtc_vsync_start;
495 DRM_DEBUG_DRIVER("Setting HSYNC %d, VSYNC %d\n", hsync, vsync);
496 regmap_write(tcon->regs, SUN4I_TCON1_BASIC5_REG,
497 SUN4I_TCON1_BASIC5_V_SYNC(vsync) |
498 SUN4I_TCON1_BASIC5_H_SYNC(hsync));
500 /* Map output pins to channel 1 */
501 regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
502 SUN4I_TCON_GCTL_IOMAP_MASK,
503 SUN4I_TCON_GCTL_IOMAP_TCON1);
506 void sun4i_tcon_mode_set(struct sun4i_tcon *tcon,
507 const struct drm_encoder *encoder,
508 const struct drm_display_mode *mode)
510 switch (encoder->encoder_type) {
511 case DRM_MODE_ENCODER_LVDS:
512 sun4i_tcon0_mode_set_lvds(tcon, encoder, mode);
514 case DRM_MODE_ENCODER_NONE:
515 sun4i_tcon0_mode_set_rgb(tcon, mode);
516 sun4i_tcon_set_mux(tcon, 0, encoder);
518 case DRM_MODE_ENCODER_TVDAC:
519 case DRM_MODE_ENCODER_TMDS:
520 sun4i_tcon1_mode_set(tcon, mode);
521 sun4i_tcon_set_mux(tcon, 1, encoder);
524 DRM_DEBUG_DRIVER("Unknown encoder type, doing nothing...\n");
527 EXPORT_SYMBOL(sun4i_tcon_mode_set);
529 static void sun4i_tcon_finish_page_flip(struct drm_device *dev,
530 struct sun4i_crtc *scrtc)
534 spin_lock_irqsave(&dev->event_lock, flags);
536 drm_crtc_send_vblank_event(&scrtc->crtc, scrtc->event);
537 drm_crtc_vblank_put(&scrtc->crtc);
540 spin_unlock_irqrestore(&dev->event_lock, flags);
543 static irqreturn_t sun4i_tcon_handler(int irq, void *private)
545 struct sun4i_tcon *tcon = private;
546 struct drm_device *drm = tcon->drm;
547 struct sun4i_crtc *scrtc = tcon->crtc;
548 struct sunxi_engine *engine = scrtc->engine;
551 regmap_read(tcon->regs, SUN4I_TCON_GINT0_REG, &status);
553 if (!(status & (SUN4I_TCON_GINT0_VBLANK_INT(0) |
554 SUN4I_TCON_GINT0_VBLANK_INT(1))))
557 drm_crtc_handle_vblank(&scrtc->crtc);
558 sun4i_tcon_finish_page_flip(drm, scrtc);
560 /* Acknowledge the interrupt */
561 regmap_update_bits(tcon->regs, SUN4I_TCON_GINT0_REG,
562 SUN4I_TCON_GINT0_VBLANK_INT(0) |
563 SUN4I_TCON_GINT0_VBLANK_INT(1),
566 if (engine->ops->vblank_quirk)
567 engine->ops->vblank_quirk(engine);
572 static int sun4i_tcon_init_clocks(struct device *dev,
573 struct sun4i_tcon *tcon)
575 tcon->clk = devm_clk_get(dev, "ahb");
576 if (IS_ERR(tcon->clk)) {
577 dev_err(dev, "Couldn't get the TCON bus clock\n");
578 return PTR_ERR(tcon->clk);
580 clk_prepare_enable(tcon->clk);
582 if (tcon->quirks->has_channel_0) {
583 tcon->sclk0 = devm_clk_get(dev, "tcon-ch0");
584 if (IS_ERR(tcon->sclk0)) {
585 dev_err(dev, "Couldn't get the TCON channel 0 clock\n");
586 return PTR_ERR(tcon->sclk0);
590 if (tcon->quirks->has_channel_1) {
591 tcon->sclk1 = devm_clk_get(dev, "tcon-ch1");
592 if (IS_ERR(tcon->sclk1)) {
593 dev_err(dev, "Couldn't get the TCON channel 1 clock\n");
594 return PTR_ERR(tcon->sclk1);
601 static void sun4i_tcon_free_clocks(struct sun4i_tcon *tcon)
603 clk_disable_unprepare(tcon->clk);
606 static int sun4i_tcon_init_irq(struct device *dev,
607 struct sun4i_tcon *tcon)
609 struct platform_device *pdev = to_platform_device(dev);
612 irq = platform_get_irq(pdev, 0);
614 dev_err(dev, "Couldn't retrieve the TCON interrupt\n");
618 ret = devm_request_irq(dev, irq, sun4i_tcon_handler, 0,
619 dev_name(dev), tcon);
621 dev_err(dev, "Couldn't request the IRQ\n");
628 static struct regmap_config sun4i_tcon_regmap_config = {
632 .max_register = 0x800,
635 static int sun4i_tcon_init_regmap(struct device *dev,
636 struct sun4i_tcon *tcon)
638 struct platform_device *pdev = to_platform_device(dev);
639 struct resource *res;
642 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
643 regs = devm_ioremap_resource(dev, res);
645 return PTR_ERR(regs);
647 tcon->regs = devm_regmap_init_mmio(dev, regs,
648 &sun4i_tcon_regmap_config);
649 if (IS_ERR(tcon->regs)) {
650 dev_err(dev, "Couldn't create the TCON regmap\n");
651 return PTR_ERR(tcon->regs);
654 /* Make sure the TCON is disabled and all IRQs are off */
655 regmap_write(tcon->regs, SUN4I_TCON_GCTL_REG, 0);
656 regmap_write(tcon->regs, SUN4I_TCON_GINT0_REG, 0);
657 regmap_write(tcon->regs, SUN4I_TCON_GINT1_REG, 0);
659 /* Disable IO lines and set them to tristate */
660 regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, ~0);
661 regmap_write(tcon->regs, SUN4I_TCON1_IO_TRI_REG, ~0);
667 * On SoCs with the old display pipeline design (Display Engine 1.0),
668 * the TCON is always tied to just one backend. Hence we can traverse
669 * the of_graph upwards to find the backend our tcon is connected to,
670 * and take its ID as our own.
672 * We can either identify backends from their compatible strings, which
673 * means maintaining a large list of them. Or, since the backend is
674 * registered and binded before the TCON, we can just go through the
675 * list of registered backends and compare the device node.
677 * As the structures now store engines instead of backends, here this
678 * function in fact searches the corresponding engine, and the ID is
679 * requested via the get_id function of the engine.
681 static struct sunxi_engine *
682 sun4i_tcon_find_engine_traverse(struct sun4i_drv *drv,
683 struct device_node *node)
685 struct device_node *port, *ep, *remote;
686 struct sunxi_engine *engine = ERR_PTR(-EINVAL);
688 port = of_graph_get_port_by_id(node, 0);
690 return ERR_PTR(-EINVAL);
693 * This only works if there is only one path from the TCON
694 * to any display engine. Otherwise the probe order of the
695 * TCONs and display engines is not guaranteed. They may
696 * either bind to the wrong one, or worse, bind to the same
697 * one if additional checks are not done.
699 * Bail out if there are multiple input connections.
701 if (of_get_available_child_count(port) != 1)
704 /* Get the first connection without specifying an ID */
705 ep = of_get_next_available_child(port, NULL);
709 remote = of_graph_get_remote_port_parent(ep);
713 /* does this node match any registered engines? */
714 list_for_each_entry(engine, &drv->engine_list, list)
715 if (remote == engine->node)
718 /* keep looking through upstream ports */
719 engine = sun4i_tcon_find_engine_traverse(drv, remote);
732 * The device tree binding says that the remote endpoint ID of any
733 * connection between components, up to and including the TCON, of
734 * the display pipeline should be equal to the actual ID of the local
735 * component. Thus we can look at any one of the input connections of
736 * the TCONs, and use that connection's remote endpoint ID as our own.
738 * Since the user of this function already finds the input port,
739 * the port is passed in directly without further checks.
741 static int sun4i_tcon_of_get_id_from_port(struct device_node *port)
743 struct device_node *ep;
746 /* try finding an upstream endpoint */
747 for_each_available_child_of_node(port, ep) {
748 struct device_node *remote;
751 remote = of_graph_get_remote_endpoint(ep);
755 ret = of_property_read_u32(remote, "reg", ®);
766 * Once we know the TCON's id, we can look through the list of
767 * engines to find a matching one. We assume all engines have
768 * been probed and added to the list.
770 static struct sunxi_engine *sun4i_tcon_get_engine_by_id(struct sun4i_drv *drv,
773 struct sunxi_engine *engine;
775 list_for_each_entry(engine, &drv->engine_list, list)
776 if (engine->id == id)
779 return ERR_PTR(-EINVAL);
783 * On SoCs with the old display pipeline design (Display Engine 1.0),
784 * we assumed the TCON was always tied to just one backend. However
785 * this proved not to be the case. On the A31, the TCON can select
786 * either backend as its source. On the A20 (and likely on the A10),
787 * the backend can choose which TCON to output to.
789 * The device tree binding says that the remote endpoint ID of any
790 * connection between components, up to and including the TCON, of
791 * the display pipeline should be equal to the actual ID of the local
792 * component. Thus we should be able to look at any one of the input
793 * connections of the TCONs, and use that connection's remote endpoint
796 * However the connections between the backend and TCON were assumed
797 * to be always singular, and their endpoit IDs were all incorrectly
798 * set to 0. This means for these old device trees, we cannot just look
799 * up the remote endpoint ID of a TCON input endpoint. TCON1 would be
800 * incorrectly identified as TCON0.
802 * This function first checks if the TCON node has 2 input endpoints.
803 * If so, then the device tree is a corrected version, and it will use
804 * sun4i_tcon_of_get_id() and sun4i_tcon_get_engine_by_id() from above
805 * to fetch the ID and engine directly. If not, then it is likely an
806 * old device trees, where the endpoint IDs were incorrect, but did not
807 * have endpoint connections between the backend and TCON across
808 * different display pipelines. It will fall back to the old method of
809 * traversing the of_graph to try and find a matching engine by device
812 * In the case of single display pipeline device trees, either method
815 static struct sunxi_engine *sun4i_tcon_find_engine(struct sun4i_drv *drv,
816 struct device_node *node)
818 struct device_node *port;
819 struct sunxi_engine *engine;
821 port = of_graph_get_port_by_id(node, 0);
823 return ERR_PTR(-EINVAL);
826 * Is this a corrected device tree with cross pipeline
827 * connections between the backend and TCON?
829 if (of_get_child_count(port) > 1) {
830 /* Get our ID directly from an upstream endpoint */
831 int id = sun4i_tcon_of_get_id_from_port(port);
833 /* Get our engine by matching our ID */
834 engine = sun4i_tcon_get_engine_by_id(drv, id);
840 /* Fallback to old method by traversing input endpoints */
842 return sun4i_tcon_find_engine_traverse(drv, node);
845 static int sun4i_tcon_bind(struct device *dev, struct device *master,
848 struct drm_device *drm = data;
849 struct sun4i_drv *drv = drm->dev_private;
850 struct sunxi_engine *engine;
851 struct device_node *remote;
852 struct sun4i_tcon *tcon;
853 bool has_lvds_rst, has_lvds_alt, can_lvds;
856 engine = sun4i_tcon_find_engine(drv, dev->of_node);
857 if (IS_ERR(engine)) {
858 dev_err(dev, "Couldn't find matching engine\n");
859 return -EPROBE_DEFER;
862 tcon = devm_kzalloc(dev, sizeof(*tcon), GFP_KERNEL);
865 dev_set_drvdata(dev, tcon);
868 tcon->id = engine->id;
869 tcon->quirks = of_device_get_match_data(dev);
871 tcon->lcd_rst = devm_reset_control_get(dev, "lcd");
872 if (IS_ERR(tcon->lcd_rst)) {
873 dev_err(dev, "Couldn't get our reset line\n");
874 return PTR_ERR(tcon->lcd_rst);
877 /* Make sure our TCON is reset */
878 ret = reset_control_reset(tcon->lcd_rst);
880 dev_err(dev, "Couldn't deassert our reset line\n");
885 * This can only be made optional since we've had DT nodes
886 * without the LVDS reset properties.
888 * If the property is missing, just disable LVDS, and print a
891 tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds");
892 if (IS_ERR(tcon->lvds_rst)) {
893 dev_err(dev, "Couldn't get our reset line\n");
894 return PTR_ERR(tcon->lvds_rst);
895 } else if (tcon->lvds_rst) {
897 reset_control_reset(tcon->lvds_rst);
899 has_lvds_rst = false;
903 * This can only be made optional since we've had DT nodes
904 * without the LVDS reset properties.
906 * If the property is missing, just disable LVDS, and print a
909 if (tcon->quirks->has_lvds_alt) {
910 tcon->lvds_pll = devm_clk_get(dev, "lvds-alt");
911 if (IS_ERR(tcon->lvds_pll)) {
912 if (PTR_ERR(tcon->lvds_pll) == -ENOENT) {
913 has_lvds_alt = false;
915 dev_err(dev, "Couldn't get the LVDS PLL\n");
916 return PTR_ERR(tcon->lvds_pll);
923 if (!has_lvds_rst || (tcon->quirks->has_lvds_alt && !has_lvds_alt)) {
925 "Missing LVDS properties, Please upgrade your DT\n");
926 dev_warn(dev, "LVDS output disabled\n");
932 ret = sun4i_tcon_init_clocks(dev, tcon);
934 dev_err(dev, "Couldn't init our TCON clocks\n");
935 goto err_assert_reset;
938 ret = sun4i_tcon_init_regmap(dev, tcon);
940 dev_err(dev, "Couldn't init our TCON regmap\n");
941 goto err_free_clocks;
944 if (tcon->quirks->has_channel_0) {
945 ret = sun4i_dclk_create(dev, tcon);
947 dev_err(dev, "Couldn't create our TCON dot clock\n");
948 goto err_free_clocks;
952 ret = sun4i_tcon_init_irq(dev, tcon);
954 dev_err(dev, "Couldn't init our TCON interrupts\n");
955 goto err_free_dotclock;
958 tcon->crtc = sun4i_crtc_init(drm, engine, tcon);
959 if (IS_ERR(tcon->crtc)) {
960 dev_err(dev, "Couldn't create our CRTC\n");
961 ret = PTR_ERR(tcon->crtc);
962 goto err_free_dotclock;
966 * If we have an LVDS panel connected to the TCON, we should
967 * just probe the LVDS connector. Otherwise, just probe RGB as
970 remote = of_graph_get_remote_node(dev->of_node, 1, 0);
971 if (of_device_is_compatible(remote, "panel-lvds"))
973 ret = sun4i_lvds_init(drm, tcon);
977 ret = sun4i_rgb_init(drm, tcon);
981 goto err_free_dotclock;
983 if (tcon->quirks->needs_de_be_mux) {
985 * We assume there is no dynamic muxing of backends
986 * and TCONs, so we select the backend with same ID.
988 * While dynamic selection might be interesting, since
989 * the CRTC is tied to the TCON, while the layers are
990 * tied to the backends, this means, we will need to
991 * switch between groups of layers. There might not be
992 * a way to represent this constraint in DRM.
994 regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
995 SUN4I_TCON0_CTL_SRC_SEL_MASK,
997 regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
998 SUN4I_TCON1_CTL_SRC_SEL_MASK,
1002 list_add_tail(&tcon->list, &drv->tcon_list);
1007 if (tcon->quirks->has_channel_0)
1008 sun4i_dclk_free(tcon);
1010 sun4i_tcon_free_clocks(tcon);
1012 reset_control_assert(tcon->lcd_rst);
1016 static void sun4i_tcon_unbind(struct device *dev, struct device *master,
1019 struct sun4i_tcon *tcon = dev_get_drvdata(dev);
1021 list_del(&tcon->list);
1022 if (tcon->quirks->has_channel_0)
1023 sun4i_dclk_free(tcon);
1024 sun4i_tcon_free_clocks(tcon);
1027 static const struct component_ops sun4i_tcon_ops = {
1028 .bind = sun4i_tcon_bind,
1029 .unbind = sun4i_tcon_unbind,
1032 static int sun4i_tcon_probe(struct platform_device *pdev)
1034 struct device_node *node = pdev->dev.of_node;
1035 struct drm_bridge *bridge;
1036 struct drm_panel *panel;
1039 ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge);
1040 if (ret == -EPROBE_DEFER)
1043 return component_add(&pdev->dev, &sun4i_tcon_ops);
1046 static int sun4i_tcon_remove(struct platform_device *pdev)
1048 component_del(&pdev->dev, &sun4i_tcon_ops);
1053 /* platform specific TCON muxing callbacks */
1054 static int sun4i_a10_tcon_set_mux(struct sun4i_tcon *tcon,
1055 const struct drm_encoder *encoder)
1057 struct sun4i_tcon *tcon0 = sun4i_get_tcon0(encoder->dev);
1063 switch (encoder->encoder_type) {
1064 case DRM_MODE_ENCODER_TMDS:
1072 regmap_update_bits(tcon0->regs, SUN4I_TCON_MUX_CTRL_REG,
1073 0x3 << shift, tcon->id << shift);
1078 static int sun5i_a13_tcon_set_mux(struct sun4i_tcon *tcon,
1079 const struct drm_encoder *encoder)
1083 if (encoder->encoder_type == DRM_MODE_ENCODER_TVDAC)
1089 * FIXME: Undocumented bits
1091 return regmap_write(tcon->regs, SUN4I_TCON_MUX_CTRL_REG, val);
1094 static int sun6i_tcon_set_mux(struct sun4i_tcon *tcon,
1095 const struct drm_encoder *encoder)
1097 struct sun4i_tcon *tcon0 = sun4i_get_tcon0(encoder->dev);
1103 switch (encoder->encoder_type) {
1104 case DRM_MODE_ENCODER_TMDS:
1109 /* TODO A31 has MIPI DSI but A31s does not */
1113 regmap_update_bits(tcon0->regs, SUN4I_TCON_MUX_CTRL_REG,
1114 0x3 << shift, tcon->id << shift);
1119 static const struct sun4i_tcon_quirks sun4i_a10_quirks = {
1120 .has_channel_0 = true,
1121 .has_channel_1 = true,
1122 .set_mux = sun4i_a10_tcon_set_mux,
1125 static const struct sun4i_tcon_quirks sun5i_a13_quirks = {
1126 .has_channel_0 = true,
1127 .has_channel_1 = true,
1128 .set_mux = sun5i_a13_tcon_set_mux,
1131 static const struct sun4i_tcon_quirks sun6i_a31_quirks = {
1132 .has_channel_0 = true,
1133 .has_channel_1 = true,
1134 .has_lvds_alt = true,
1135 .needs_de_be_mux = true,
1136 .set_mux = sun6i_tcon_set_mux,
1139 static const struct sun4i_tcon_quirks sun6i_a31s_quirks = {
1140 .has_channel_0 = true,
1141 .has_channel_1 = true,
1142 .needs_de_be_mux = true,
1145 static const struct sun4i_tcon_quirks sun7i_a20_quirks = {
1146 .has_channel_0 = true,
1147 .has_channel_1 = true,
1148 /* Same display pipeline structure as A10 */
1149 .set_mux = sun4i_a10_tcon_set_mux,
1152 static const struct sun4i_tcon_quirks sun8i_a33_quirks = {
1153 .has_channel_0 = true,
1154 .has_lvds_alt = true,
1157 static const struct sun4i_tcon_quirks sun8i_a83t_lcd_quirks = {
1158 .has_channel_0 = true,
1161 static const struct sun4i_tcon_quirks sun8i_a83t_tv_quirks = {
1162 .has_channel_1 = true,
1165 static const struct sun4i_tcon_quirks sun8i_v3s_quirks = {
1166 .has_channel_0 = true,
1169 /* sun4i_drv uses this list to check if a device node is a TCON */
1170 const struct of_device_id sun4i_tcon_of_table[] = {
1171 { .compatible = "allwinner,sun4i-a10-tcon", .data = &sun4i_a10_quirks },
1172 { .compatible = "allwinner,sun5i-a13-tcon", .data = &sun5i_a13_quirks },
1173 { .compatible = "allwinner,sun6i-a31-tcon", .data = &sun6i_a31_quirks },
1174 { .compatible = "allwinner,sun6i-a31s-tcon", .data = &sun6i_a31s_quirks },
1175 { .compatible = "allwinner,sun7i-a20-tcon", .data = &sun7i_a20_quirks },
1176 { .compatible = "allwinner,sun8i-a33-tcon", .data = &sun8i_a33_quirks },
1177 { .compatible = "allwinner,sun8i-a83t-tcon-lcd", .data = &sun8i_a83t_lcd_quirks },
1178 { .compatible = "allwinner,sun8i-a83t-tcon-tv", .data = &sun8i_a83t_tv_quirks },
1179 { .compatible = "allwinner,sun8i-v3s-tcon", .data = &sun8i_v3s_quirks },
1182 MODULE_DEVICE_TABLE(of, sun4i_tcon_of_table);
1183 EXPORT_SYMBOL(sun4i_tcon_of_table);
1185 static struct platform_driver sun4i_tcon_platform_driver = {
1186 .probe = sun4i_tcon_probe,
1187 .remove = sun4i_tcon_remove,
1189 .name = "sun4i-tcon",
1190 .of_match_table = sun4i_tcon_of_table,
1193 module_platform_driver(sun4i_tcon_platform_driver);
1195 MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
1196 MODULE_DESCRIPTION("Allwinner A10 Timing Controller Driver");
1197 MODULE_LICENSE("GPL");