2 * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved.
4 * Parts of this file were based on sources as follows:
6 * Copyright (c) 2006-2008 Intel Corporation
7 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
8 * Copyright (C) 2011 Texas Instruments
10 * This program is free software and is provided to you under the terms of the
11 * GNU General Public License version 2 as published by the Free Software
12 * Foundation, and any use by you of this program is subject to the terms of
18 * DOC: ARM PrimeCell PL111 CLCD Driver
20 * The PL111 is a simple LCD controller that can support TFT and STN
21 * displays. This driver exposes a standard KMS interface for them.
23 * This driver uses the same Device Tree binding as the fbdev CLCD
24 * driver. While the fbdev driver supports panels that may be
25 * connected to the CLCD internally to the CLCD driver, in DRM the
26 * panels get split out to drivers/gpu/drm/panels/. This means that,
27 * in converting from using fbdev to using DRM, you also need to write
28 * a panel driver (which may be as simple as an entry in
31 * The driver currently doesn't expose the cursor. The DRM API for
32 * cursors requires support for 64x64 ARGB8888 cursor images, while
33 * the hardware can only support 64x64 monochrome with masking
34 * cursors. While one could imagine trying to hack something together
35 * to look at the ARGB8888 and program reasonable in monochrome, we
36 * just don't expose the cursor at all instead, and leave cursor
37 * support to the X11 software cursor layer.
41 * - Fix race between setting plane base address and getting IRQ for
42 * vsync firing the pageflip completion.
44 * - Use the "max-memory-bandwidth" DT property to filter the
47 * - Read back hardware state at boot to skip reprogramming the
48 * hardware when doing a no-op modeset.
50 * - Use the CLKSEL bit to support switching between the two external
54 #include <linux/amba/bus.h>
55 #include <linux/amba/clcd-regs.h>
56 #include <linux/version.h>
57 #include <linux/shmem_fs.h>
58 #include <linux/dma-buf.h>
59 #include <linux/module.h>
60 #include <linux/slab.h>
62 #include <linux/of_graph.h>
65 #include <drm/drm_atomic_helper.h>
66 #include <drm/drm_crtc_helper.h>
67 #include <drm/drm_gem_cma_helper.h>
68 #include <drm/drm_gem_framebuffer_helper.h>
69 #include <drm/drm_fb_helper.h>
70 #include <drm/drm_fb_cma_helper.h>
71 #include <drm/drm_of.h>
72 #include <drm/drm_bridge.h>
73 #include <drm/drm_panel.h>
75 #include "pl111_drm.h"
76 #include "pl111_versatile.h"
78 #define DRIVER_DESC "DRM module for PL111"
80 static const struct drm_mode_config_funcs mode_config_funcs = {
81 .fb_create = drm_gem_fb_create,
82 .atomic_check = drm_atomic_helper_check,
83 .atomic_commit = drm_atomic_helper_commit,
86 static int pl111_modeset_init(struct drm_device *dev)
88 struct drm_mode_config *mode_config;
89 struct pl111_drm_dev_private *priv = dev->dev_private;
90 struct device_node *np = dev->dev->of_node;
91 struct device_node *remote;
92 struct drm_panel *panel = NULL;
93 struct drm_bridge *bridge = NULL;
98 drm_mode_config_init(dev);
99 mode_config = &dev->mode_config;
100 mode_config->funcs = &mode_config_funcs;
101 mode_config->min_width = 1;
102 mode_config->max_width = 1024;
103 mode_config->min_height = 1;
104 mode_config->max_height = 768;
107 for_each_endpoint_of_node(np, remote) {
108 struct drm_panel *tmp_panel;
109 struct drm_bridge *tmp_bridge;
111 dev_dbg(dev->dev, "checking endpoint %d\n", i);
113 ret = drm_of_find_panel_or_bridge(dev->dev->of_node,
118 if (ret == -EPROBE_DEFER) {
120 * Something deferred, but that is often just
121 * another way of saying -ENODEV, but let's
122 * cast a vote for later deferral.
125 } else if (ret != -ENODEV) {
126 /* Continue, maybe something else is working */
128 "endpoint %d returns %d\n", i, ret);
134 "found panel on endpoint %d\n", i);
139 "found bridge on endpoint %d\n", i);
147 * If we can't find neither panel nor bridge on any of the
148 * endpoints, and any of them retured -EPROBE_DEFER, then
149 * let's defer this driver too.
151 if ((!panel && !bridge) && defer)
152 return -EPROBE_DEFER;
155 bridge = drm_panel_bridge_add(panel,
156 DRM_MODE_CONNECTOR_Unknown);
157 if (IS_ERR(bridge)) {
158 ret = PTR_ERR(bridge);
162 dev_info(dev->dev, "Using non-panel bridge\n");
164 dev_err(dev->dev, "No bridge, exiting\n");
168 priv->bridge = bridge;
171 priv->connector = panel->connector;
174 ret = pl111_display_init(dev);
176 dev_err(dev->dev, "Failed to init display\n");
180 ret = drm_simple_display_pipe_attach_bridge(&priv->pipe,
185 if (!priv->variant->broken_vblank) {
186 ret = drm_vblank_init(dev, 1);
188 dev_err(dev->dev, "Failed to init vblank\n");
193 drm_mode_config_reset(dev);
195 drm_fb_cma_fbdev_init(dev, 32, 0);
197 drm_kms_helper_poll_init(dev);
203 drm_panel_bridge_remove(bridge);
205 drm_mode_config_cleanup(dev);
210 DEFINE_DRM_GEM_CMA_FOPS(drm_fops);
212 static struct drm_driver pl111_drm_driver = {
214 DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME | DRIVER_ATOMIC,
215 .lastclose = drm_fb_helper_lastclose,
224 .dumb_create = drm_gem_cma_dumb_create,
225 .gem_free_object_unlocked = drm_gem_cma_free_object,
226 .gem_vm_ops = &drm_gem_cma_vm_ops,
227 .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
228 .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
229 .gem_prime_import = drm_gem_prime_import,
230 .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
231 .gem_prime_export = drm_gem_prime_export,
232 .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
234 #if defined(CONFIG_DEBUG_FS)
235 .debugfs_init = pl111_debugfs_init,
239 static int pl111_amba_probe(struct amba_device *amba_dev,
240 const struct amba_id *id)
242 struct device *dev = &amba_dev->dev;
243 struct pl111_drm_dev_private *priv;
244 const struct pl111_variant_data *variant = id->data;
245 struct drm_device *drm;
248 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
252 if (!variant->broken_vblank) {
253 pl111_drm_driver.enable_vblank = pl111_enable_vblank;
254 pl111_drm_driver.disable_vblank = pl111_disable_vblank;
257 drm = drm_dev_alloc(&pl111_drm_driver, dev);
260 amba_set_drvdata(amba_dev, drm);
262 drm->dev_private = priv;
263 priv->variant = variant;
265 /* The two variants swap this register */
266 if (variant->is_pl110) {
267 priv->ienb = CLCD_PL110_IENB;
268 priv->ctrl = CLCD_PL110_CNTL;
270 priv->ienb = CLCD_PL111_IENB;
271 priv->ctrl = CLCD_PL111_CNTL;
274 priv->regs = devm_ioremap_resource(dev, &amba_dev->res);
275 if (IS_ERR(priv->regs)) {
276 dev_err(dev, "%s failed mmio\n", __func__);
277 return PTR_ERR(priv->regs);
280 /* This may override some variant settings */
281 ret = pl111_versatile_init(dev, priv);
285 /* turn off interrupts before requesting the irq */
286 writel(0, priv->regs + priv->ienb);
288 ret = devm_request_irq(dev, amba_dev->irq[0], pl111_irq, 0,
289 variant->name, priv);
291 dev_err(dev, "%s failed irq %d\n", __func__, ret);
295 ret = pl111_modeset_init(drm);
299 ret = drm_dev_register(drm, 0);
310 static int pl111_amba_remove(struct amba_device *amba_dev)
312 struct drm_device *drm = amba_get_drvdata(amba_dev);
313 struct pl111_drm_dev_private *priv = drm->dev_private;
315 drm_dev_unregister(drm);
316 drm_fb_cma_fbdev_fini(drm);
318 drm_panel_bridge_remove(priv->bridge);
319 drm_mode_config_cleanup(drm);
326 * This early variant lacks the 565 and 444 pixel formats.
328 static const u32 pl110_pixel_formats[] = {
339 static const struct pl111_variant_data pl110_variant = {
342 .formats = pl110_pixel_formats,
343 .nformats = ARRAY_SIZE(pl110_pixel_formats),
346 /* RealView, Versatile Express etc use this modern variant */
347 static const u32 pl111_pixel_formats[] = {
364 static const struct pl111_variant_data pl111_variant = {
366 .formats = pl111_pixel_formats,
367 .nformats = ARRAY_SIZE(pl111_pixel_formats),
370 static const struct amba_id pl111_id_table[] = {
374 .data = (void*)&pl110_variant,
379 .data = (void*)&pl111_variant,
384 static struct amba_driver pl111_amba_driver __maybe_unused = {
386 .name = "drm-clcd-pl111",
388 .probe = pl111_amba_probe,
389 .remove = pl111_amba_remove,
390 .id_table = pl111_id_table,
393 #ifdef CONFIG_ARM_AMBA
394 module_amba_driver(pl111_amba_driver);
397 MODULE_DESCRIPTION(DRIVER_DESC);
398 MODULE_AUTHOR("ARM Ltd.");
399 MODULE_LICENSE("GPL");