drivers/gpu/drm/i915/intel_display.c

   1 /*
   2  * Copyright © 2006-2007 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  *      Eric Anholt <eric@anholt.net>
  25  */
  26
  27 #include <linux/module.h>
  28 #include <linux/input.h>
  29 #include <linux/i2c.h>
  30 #include <linux/kernel.h>
  31 #include <linux/slab.h>
  32 #include "drmP.h"
  33 #include "intel_drv.h"
  34 #include "i915_drm.h"
  35 #include "i915_drv.h"
  36 #include "drm_dp_helper.h"
  37
  38 #include "drm_crtc_helper.h"
  39
  40 #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
  41
  42 bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
  43 static void intel_update_watermarks(struct drm_device *dev);
  44 static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule);
  45
  46 typedef struct {
  47     /* given values */
  48     int n;
  49     int m1, m2;
  50     int p1, p2;
  51     /* derived values */
  52     int dot;
  53     int vco;
  54     int m;
  55     int p;
  56 } intel_clock_t;
  57
  58 typedef struct {
  59     int min, max;
  60 } intel_range_t;
  61
  62 typedef struct {
  63     int dot_limit;
  64     int p2_slow, p2_fast;
  65 } intel_p2_t;
  66
  67 #define INTEL_P2_NUM                  2
  68 typedef struct intel_limit intel_limit_t;
  69 struct intel_limit {
  70     intel_range_t   dot, vco, n, m, m1, m2, p, p1;
  71     intel_p2_t      p2;
  72     bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
  73                       int, int, intel_clock_t *);
  74 };
  75
  76 #define I8XX_DOT_MIN              25000
  77 #define I8XX_DOT_MAX             350000
  78 #define I8XX_VCO_MIN             930000
  79 #define I8XX_VCO_MAX            1400000
  80 #define I8XX_N_MIN                    3
  81 #define I8XX_N_MAX                   16
  82 #define I8XX_M_MIN                   96
  83 #define I8XX_M_MAX                  140
  84 #define I8XX_M1_MIN                  18
  85 #define I8XX_M1_MAX                  26
  86 #define I8XX_M2_MIN                   6
  87 #define I8XX_M2_MAX                  16
  88 #define I8XX_P_MIN                    4
  89 #define I8XX_P_MAX                  128
  90 #define I8XX_P1_MIN                   2
  91 #define I8XX_P1_MAX                  33
  92 #define I8XX_P1_LVDS_MIN              1
  93 #define I8XX_P1_LVDS_MAX              6
  94 #define I8XX_P2_SLOW                  4
  95 #define I8XX_P2_FAST                  2
  96 #define I8XX_P2_LVDS_SLOW             14
  97 #define I8XX_P2_LVDS_FAST             7
  98 #define I8XX_P2_SLOW_LIMIT       165000
  99
 100 #define I9XX_DOT_MIN              20000
 101 #define I9XX_DOT_MAX             400000
 102 #define I9XX_VCO_MIN            1400000
 103 #define I9XX_VCO_MAX            2800000
 104 #define PINEVIEW_VCO_MIN                1700000
 105 #define PINEVIEW_VCO_MAX                3500000
 106 #define I9XX_N_MIN                    1
 107 #define I9XX_N_MAX                    6
 108 /* Pineview's Ncounter is a ring counter */
 109 #define PINEVIEW_N_MIN                3
 110 #define PINEVIEW_N_MAX                6
 111 #define I9XX_M_MIN                   70
 112 #define I9XX_M_MAX                  120
 113 #define PINEVIEW_M_MIN                2
 114 #define PINEVIEW_M_MAX              256
 115 #define I9XX_M1_MIN                  10
 116 #define I9XX_M1_MAX                  22
 117 #define I9XX_M2_MIN                   5
 118 #define I9XX_M2_MAX                   9
 119 /* Pineview M1 is reserved, and must be 0 */
 120 #define PINEVIEW_M1_MIN               0
 121 #define PINEVIEW_M1_MAX               0
 122 #define PINEVIEW_M2_MIN               0
 123 #define PINEVIEW_M2_MAX               254
 124 #define I9XX_P_SDVO_DAC_MIN           5
 125 #define I9XX_P_SDVO_DAC_MAX          80
 126 #define I9XX_P_LVDS_MIN               7
 127 #define I9XX_P_LVDS_MAX              98
 128 #define PINEVIEW_P_LVDS_MIN                   7
 129 #define PINEVIEW_P_LVDS_MAX                  112
 130 #define I9XX_P1_MIN                   1
 131 #define I9XX_P1_MAX                   8
 132 #define I9XX_P2_SDVO_DAC_SLOW                10
 133 #define I9XX_P2_SDVO_DAC_FAST                 5
 134 #define I9XX_P2_SDVO_DAC_SLOW_LIMIT      200000
 135 #define I9XX_P2_LVDS_SLOW                    14
 136 #define I9XX_P2_LVDS_FAST                     7
 137 #define I9XX_P2_LVDS_SLOW_LIMIT          112000
 138
 139 /*The parameter is for SDVO on G4x platform*/
 140 #define G4X_DOT_SDVO_MIN           25000
 141 #define G4X_DOT_SDVO_MAX           270000
 142 #define G4X_VCO_MIN                1750000
 143 #define G4X_VCO_MAX                3500000
 144 #define G4X_N_SDVO_MIN             1
 145 #define G4X_N_SDVO_MAX             4
 146 #define G4X_M_SDVO_MIN             104
 147 #define G4X_M_SDVO_MAX             138
 148 #define G4X_M1_SDVO_MIN            17
 149 #define G4X_M1_SDVO_MAX            23
 150 #define G4X_M2_SDVO_MIN            5
 151 #define G4X_M2_SDVO_MAX            11
 152 #define G4X_P_SDVO_MIN             10
 153 #define G4X_P_SDVO_MAX             30
 154 #define G4X_P1_SDVO_MIN            1
 155 #define G4X_P1_SDVO_MAX            3
 156 #define G4X_P2_SDVO_SLOW           10
 157 #define G4X_P2_SDVO_FAST           10
 158 #define G4X_P2_SDVO_LIMIT          270000
 159
 160 /*The parameter is for HDMI_DAC on G4x platform*/
 161 #define G4X_DOT_HDMI_DAC_MIN           22000
 162 #define G4X_DOT_HDMI_DAC_MAX           400000
 163 #define G4X_N_HDMI_DAC_MIN             1
 164 #define G4X_N_HDMI_DAC_MAX             4
 165 #define G4X_M_HDMI_DAC_MIN             104
 166 #define G4X_M_HDMI_DAC_MAX             138
 167 #define G4X_M1_HDMI_DAC_MIN            16
 168 #define G4X_M1_HDMI_DAC_MAX            23
 169 #define G4X_M2_HDMI_DAC_MIN            5
 170 #define G4X_M2_HDMI_DAC_MAX            11
 171 #define G4X_P_HDMI_DAC_MIN             5
 172 #define G4X_P_HDMI_DAC_MAX             80
 173 #define G4X_P1_HDMI_DAC_MIN            1
 174 #define G4X_P1_HDMI_DAC_MAX            8
 175 #define G4X_P2_HDMI_DAC_SLOW           10
 176 #define G4X_P2_HDMI_DAC_FAST           5
 177 #define G4X_P2_HDMI_DAC_LIMIT          165000
 178
 179 /*The parameter is for SINGLE_CHANNEL_LVDS on G4x platform*/
 180 #define G4X_DOT_SINGLE_CHANNEL_LVDS_MIN           20000
 181 #define G4X_DOT_SINGLE_CHANNEL_LVDS_MAX           115000
 182 #define G4X_N_SINGLE_CHANNEL_LVDS_MIN             1
 183 #define G4X_N_SINGLE_CHANNEL_LVDS_MAX             3
 184 #define G4X_M_SINGLE_CHANNEL_LVDS_MIN             104
 185 #define G4X_M_SINGLE_CHANNEL_LVDS_MAX             138
 186 #define G4X_M1_SINGLE_CHANNEL_LVDS_MIN            17
 187 #define G4X_M1_SINGLE_CHANNEL_LVDS_MAX            23
 188 #define G4X_M2_SINGLE_CHANNEL_LVDS_MIN            5
 189 #define G4X_M2_SINGLE_CHANNEL_LVDS_MAX            11
 190 #define G4X_P_SINGLE_CHANNEL_LVDS_MIN             28
 191 #define G4X_P_SINGLE_CHANNEL_LVDS_MAX             112
 192 #define G4X_P1_SINGLE_CHANNEL_LVDS_MIN            2
 193 #define G4X_P1_SINGLE_CHANNEL_LVDS_MAX            8
 194 #define G4X_P2_SINGLE_CHANNEL_LVDS_SLOW           14
 195 #define G4X_P2_SINGLE_CHANNEL_LVDS_FAST           14
 196 #define G4X_P2_SINGLE_CHANNEL_LVDS_LIMIT          0
 197
 198 /*The parameter is for DUAL_CHANNEL_LVDS on G4x platform*/
 199 #define G4X_DOT_DUAL_CHANNEL_LVDS_MIN           80000
 200 #define G4X_DOT_DUAL_CHANNEL_LVDS_MAX           224000
 201 #define G4X_N_DUAL_CHANNEL_LVDS_MIN             1
 202 #define G4X_N_DUAL_CHANNEL_LVDS_MAX             3
 203 #define G4X_M_DUAL_CHANNEL_LVDS_MIN             104
 204 #define G4X_M_DUAL_CHANNEL_LVDS_MAX             138
 205 #define G4X_M1_DUAL_CHANNEL_LVDS_MIN            17
 206 #define G4X_M1_DUAL_CHANNEL_LVDS_MAX            23
 207 #define G4X_M2_DUAL_CHANNEL_LVDS_MIN            5
 208 #define G4X_M2_DUAL_CHANNEL_LVDS_MAX            11
 209 #define G4X_P_DUAL_CHANNEL_LVDS_MIN             14
 210 #define G4X_P_DUAL_CHANNEL_LVDS_MAX             42
 211 #define G4X_P1_DUAL_CHANNEL_LVDS_MIN            2
 212 #define G4X_P1_DUAL_CHANNEL_LVDS_MAX            6
 213 #define G4X_P2_DUAL_CHANNEL_LVDS_SLOW           7
 214 #define G4X_P2_DUAL_CHANNEL_LVDS_FAST           7
 215 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT          0
 216
 217 /*The parameter is for DISPLAY PORT on G4x platform*/
 218 #define G4X_DOT_DISPLAY_PORT_MIN           161670
 219 #define G4X_DOT_DISPLAY_PORT_MAX           227000
 220 #define G4X_N_DISPLAY_PORT_MIN             1
 221 #define G4X_N_DISPLAY_PORT_MAX             2
 222 #define G4X_M_DISPLAY_PORT_MIN             97
 223 #define G4X_M_DISPLAY_PORT_MAX             108
 224 #define G4X_M1_DISPLAY_PORT_MIN            0x10
 225 #define G4X_M1_DISPLAY_PORT_MAX            0x12
 226 #define G4X_M2_DISPLAY_PORT_MIN            0x05
 227 #define G4X_M2_DISPLAY_PORT_MAX            0x06
 228 #define G4X_P_DISPLAY_PORT_MIN             10
 229 #define G4X_P_DISPLAY_PORT_MAX             20
 230 #define G4X_P1_DISPLAY_PORT_MIN            1
 231 #define G4X_P1_DISPLAY_PORT_MAX            2
 232 #define G4X_P2_DISPLAY_PORT_SLOW           10
 233 #define G4X_P2_DISPLAY_PORT_FAST           10
 234 #define G4X_P2_DISPLAY_PORT_LIMIT          0
 235
 236 /* Ironlake / Sandybridge */
 237 /* as we calculate clock using (register_value + 2) for
 238    N/M1/M2, so here the range value for them is (actual_value-2).
 239  */
 240 #define IRONLAKE_DOT_MIN         25000
 241 #define IRONLAKE_DOT_MAX         350000
 242 #define IRONLAKE_VCO_MIN         1760000
 243 #define IRONLAKE_VCO_MAX         3510000
 244 #define IRONLAKE_M1_MIN          12
 245 #define IRONLAKE_M1_MAX          22
 246 #define IRONLAKE_M2_MIN          5
 247 #define IRONLAKE_M2_MAX          9
 248 #define IRONLAKE_P2_DOT_LIMIT    225000 /* 225Mhz */
 249
 250 /* We have parameter ranges for different type of outputs. */
 251
 252 /* DAC & HDMI Refclk 120Mhz */
 253 #define IRONLAKE_DAC_N_MIN      1
 254 #define IRONLAKE_DAC_N_MAX      5
 255 #define IRONLAKE_DAC_M_MIN      79
 256 #define IRONLAKE_DAC_M_MAX      127
 257 #define IRONLAKE_DAC_P_MIN      5
 258 #define IRONLAKE_DAC_P_MAX      80
 259 #define IRONLAKE_DAC_P1_MIN     1
 260 #define IRONLAKE_DAC_P1_MAX     8
 261 #define IRONLAKE_DAC_P2_SLOW    10
 262 #define IRONLAKE_DAC_P2_FAST    5
 263
 264 /* LVDS single-channel 120Mhz refclk */
 265 #define IRONLAKE_LVDS_S_N_MIN   1
 266 #define IRONLAKE_LVDS_S_N_MAX   3
 267 #define IRONLAKE_LVDS_S_M_MIN   79
 268 #define IRONLAKE_LVDS_S_M_MAX   118
 269 #define IRONLAKE_LVDS_S_P_MIN   28
 270 #define IRONLAKE_LVDS_S_P_MAX   112
 271 #define IRONLAKE_LVDS_S_P1_MIN  2
 272 #define IRONLAKE_LVDS_S_P1_MAX  8
 273 #define IRONLAKE_LVDS_S_P2_SLOW 14
 274 #define IRONLAKE_LVDS_S_P2_FAST 14
 275
 276 /* LVDS dual-channel 120Mhz refclk */
 277 #define IRONLAKE_LVDS_D_N_MIN   1
 278 #define IRONLAKE_LVDS_D_N_MAX   3
 279 #define IRONLAKE_LVDS_D_M_MIN   79
 280 #define IRONLAKE_LVDS_D_M_MAX   127
 281 #define IRONLAKE_LVDS_D_P_MIN   14
 282 #define IRONLAKE_LVDS_D_P_MAX   56
 283 #define IRONLAKE_LVDS_D_P1_MIN  2
 284 #define IRONLAKE_LVDS_D_P1_MAX  8
 285 #define IRONLAKE_LVDS_D_P2_SLOW 7
 286 #define IRONLAKE_LVDS_D_P2_FAST 7
 287
 288 /* LVDS single-channel 100Mhz refclk */
 289 #define IRONLAKE_LVDS_S_SSC_N_MIN       1
 290 #define IRONLAKE_LVDS_S_SSC_N_MAX       2
 291 #define IRONLAKE_LVDS_S_SSC_M_MIN       79
 292 #define IRONLAKE_LVDS_S_SSC_M_MAX       126
 293 #define IRONLAKE_LVDS_S_SSC_P_MIN       28
 294 #define IRONLAKE_LVDS_S_SSC_P_MAX       112
 295 #define IRONLAKE_LVDS_S_SSC_P1_MIN      2
 296 #define IRONLAKE_LVDS_S_SSC_P1_MAX      8
 297 #define IRONLAKE_LVDS_S_SSC_P2_SLOW     14
 298 #define IRONLAKE_LVDS_S_SSC_P2_FAST     14
 299
 300 /* LVDS dual-channel 100Mhz refclk */
 301 #define IRONLAKE_LVDS_D_SSC_N_MIN       1
 302 #define IRONLAKE_LVDS_D_SSC_N_MAX       3
 303 #define IRONLAKE_LVDS_D_SSC_M_MIN       79
 304 #define IRONLAKE_LVDS_D_SSC_M_MAX       126
 305 #define IRONLAKE_LVDS_D_SSC_P_MIN       14
 306 #define IRONLAKE_LVDS_D_SSC_P_MAX       42
 307 #define IRONLAKE_LVDS_D_SSC_P1_MIN      2
 308 #define IRONLAKE_LVDS_D_SSC_P1_MAX      6
 309 #define IRONLAKE_LVDS_D_SSC_P2_SLOW     7
 310 #define IRONLAKE_LVDS_D_SSC_P2_FAST     7
 311
 312 /* DisplayPort */
 313 #define IRONLAKE_DP_N_MIN               1
 314 #define IRONLAKE_DP_N_MAX               2
 315 #define IRONLAKE_DP_M_MIN               81
 316 #define IRONLAKE_DP_M_MAX               90
 317 #define IRONLAKE_DP_P_MIN               10
 318 #define IRONLAKE_DP_P_MAX               20
 319 #define IRONLAKE_DP_P2_FAST             10
 320 #define IRONLAKE_DP_P2_SLOW             10
 321 #define IRONLAKE_DP_P2_LIMIT            0
 322 #define IRONLAKE_DP_P1_MIN              1
 323 #define IRONLAKE_DP_P1_MAX              2
 324
 325 static bool
 326 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 327                     int target, int refclk, intel_clock_t *best_clock);
 328 static bool
 329 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 330                         int target, int refclk, intel_clock_t *best_clock);
 331
 332 static bool
 333 intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
 334                       int target, int refclk, intel_clock_t *best_clock);
 335 static bool
 336 intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
 337                            int target, int refclk, intel_clock_t *best_clock);
 338
 339 static const intel_limit_t intel_limits_i8xx_dvo = {
 340         .dot = { .min = I8XX_DOT_MIN,           .max = I8XX_DOT_MAX },
 341         .vco = { .min = I8XX_VCO_MIN,           .max = I8XX_VCO_MAX },
 342         .n   = { .min = I8XX_N_MIN,             .max = I8XX_N_MAX },
 343         .m   = { .min = I8XX_M_MIN,             .max = I8XX_M_MAX },
 344         .m1  = { .min = I8XX_M1_MIN,            .max = I8XX_M1_MAX },
 345         .m2  = { .min = I8XX_M2_MIN,            .max = I8XX_M2_MAX },
 346         .p   = { .min = I8XX_P_MIN,             .max = I8XX_P_MAX },
 347         .p1  = { .min = I8XX_P1_MIN,            .max = I8XX_P1_MAX },
 348         .p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
 349                  .p2_slow = I8XX_P2_SLOW,       .p2_fast = I8XX_P2_FAST },
 350         .find_pll = intel_find_best_PLL,
 351 };
 352
 353 static const intel_limit_t intel_limits_i8xx_lvds = {
 354         .dot = { .min = I8XX_DOT_MIN,           .max = I8XX_DOT_MAX },
 355         .vco = { .min = I8XX_VCO_MIN,           .max = I8XX_VCO_MAX },
 356         .n   = { .min = I8XX_N_MIN,             .max = I8XX_N_MAX },
 357         .m   = { .min = I8XX_M_MIN,             .max = I8XX_M_MAX },
 358         .m1  = { .min = I8XX_M1_MIN,            .max = I8XX_M1_MAX },
 359         .m2  = { .min = I8XX_M2_MIN,            .max = I8XX_M2_MAX },
 360         .p   = { .min = I8XX_P_MIN,             .max = I8XX_P_MAX },
 361         .p1  = { .min = I8XX_P1_LVDS_MIN,       .max = I8XX_P1_LVDS_MAX },
 362         .p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
 363                  .p2_slow = I8XX_P2_LVDS_SLOW,  .p2_fast = I8XX_P2_LVDS_FAST },
 364         .find_pll = intel_find_best_PLL,
 365 };
 366
 367 static const intel_limit_t intel_limits_i9xx_sdvo = {
 368         .dot = { .min = I9XX_DOT_MIN,           .max = I9XX_DOT_MAX },
 369         .vco = { .min = I9XX_VCO_MIN,           .max = I9XX_VCO_MAX },
 370         .n   = { .min = I9XX_N_MIN,             .max = I9XX_N_MAX },
 371         .m   = { .min = I9XX_M_MIN,             .max = I9XX_M_MAX },
 372         .m1  = { .min = I9XX_M1_MIN,            .max = I9XX_M1_MAX },
 373         .m2  = { .min = I9XX_M2_MIN,            .max = I9XX_M2_MAX },
 374         .p   = { .min = I9XX_P_SDVO_DAC_MIN,    .max = I9XX_P_SDVO_DAC_MAX },
 375         .p1  = { .min = I9XX_P1_MIN,            .max = I9XX_P1_MAX },
 376         .p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
 377                  .p2_slow = I9XX_P2_SDVO_DAC_SLOW,      .p2_fast = I9XX_P2_SDVO_DAC_FAST },
 378         .find_pll = intel_find_best_PLL,
 379 };
 380
 381 static const intel_limit_t intel_limits_i9xx_lvds = {
 382         .dot = { .min = I9XX_DOT_MIN,           .max = I9XX_DOT_MAX },
 383         .vco = { .min = I9XX_VCO_MIN,           .max = I9XX_VCO_MAX },
 384         .n   = { .min = I9XX_N_MIN,             .max = I9XX_N_MAX },
 385         .m   = { .min = I9XX_M_MIN,             .max = I9XX_M_MAX },
 386         .m1  = { .min = I9XX_M1_MIN,            .max = I9XX_M1_MAX },
 387         .m2  = { .min = I9XX_M2_MIN,            .max = I9XX_M2_MAX },
 388         .p   = { .min = I9XX_P_LVDS_MIN,        .max = I9XX_P_LVDS_MAX },
 389         .p1  = { .min = I9XX_P1_MIN,            .max = I9XX_P1_MAX },
 390         /* The single-channel range is 25-112Mhz, and dual-channel
 391          * is 80-224Mhz.  Prefer single channel as much as possible.
 392          */
 393         .p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
 394                  .p2_slow = I9XX_P2_LVDS_SLOW,  .p2_fast = I9XX_P2_LVDS_FAST },
 395         .find_pll = intel_find_best_PLL,
 396 };
 397
 398     /* below parameter and function is for G4X Chipset Family*/
 399 static const intel_limit_t intel_limits_g4x_sdvo = {
 400         .dot = { .min = G4X_DOT_SDVO_MIN,       .max = G4X_DOT_SDVO_MAX },
 401         .vco = { .min = G4X_VCO_MIN,            .max = G4X_VCO_MAX},
 402         .n   = { .min = G4X_N_SDVO_MIN,         .max = G4X_N_SDVO_MAX },
 403         .m   = { .min = G4X_M_SDVO_MIN,         .max = G4X_M_SDVO_MAX },
 404         .m1  = { .min = G4X_M1_SDVO_MIN,        .max = G4X_M1_SDVO_MAX },
 405         .m2  = { .min = G4X_M2_SDVO_MIN,        .max = G4X_M2_SDVO_MAX },
 406         .p   = { .min = G4X_P_SDVO_MIN,         .max = G4X_P_SDVO_MAX },
 407         .p1  = { .min = G4X_P1_SDVO_MIN,        .max = G4X_P1_SDVO_MAX},
 408         .p2  = { .dot_limit = G4X_P2_SDVO_LIMIT,
 409                  .p2_slow = G4X_P2_SDVO_SLOW,
 410                  .p2_fast = G4X_P2_SDVO_FAST
 411         },
 412         .find_pll = intel_g4x_find_best_PLL,
 413 };
 414
 415 static const intel_limit_t intel_limits_g4x_hdmi = {
 416         .dot = { .min = G4X_DOT_HDMI_DAC_MIN,   .max = G4X_DOT_HDMI_DAC_MAX },
 417         .vco = { .min = G4X_VCO_MIN,            .max = G4X_VCO_MAX},
 418         .n   = { .min = G4X_N_HDMI_DAC_MIN,     .max = G4X_N_HDMI_DAC_MAX },
 419         .m   = { .min = G4X_M_HDMI_DAC_MIN,     .max = G4X_M_HDMI_DAC_MAX },
 420         .m1  = { .min = G4X_M1_HDMI_DAC_MIN,    .max = G4X_M1_HDMI_DAC_MAX },
 421         .m2  = { .min = G4X_M2_HDMI_DAC_MIN,    .max = G4X_M2_HDMI_DAC_MAX },
 422         .p   = { .min = G4X_P_HDMI_DAC_MIN,     .max = G4X_P_HDMI_DAC_MAX },
 423         .p1  = { .min = G4X_P1_HDMI_DAC_MIN,    .max = G4X_P1_HDMI_DAC_MAX},
 424         .p2  = { .dot_limit = G4X_P2_HDMI_DAC_LIMIT,
 425                  .p2_slow = G4X_P2_HDMI_DAC_SLOW,
 426                  .p2_fast = G4X_P2_HDMI_DAC_FAST
 427         },
 428         .find_pll = intel_g4x_find_best_PLL,
 429 };
 430
 431 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
 432         .dot = { .min = G4X_DOT_SINGLE_CHANNEL_LVDS_MIN,
 433                  .max = G4X_DOT_SINGLE_CHANNEL_LVDS_MAX },
 434         .vco = { .min = G4X_VCO_MIN,
 435                  .max = G4X_VCO_MAX },
 436         .n   = { .min = G4X_N_SINGLE_CHANNEL_LVDS_MIN,
 437                  .max = G4X_N_SINGLE_CHANNEL_LVDS_MAX },
 438         .m   = { .min = G4X_M_SINGLE_CHANNEL_LVDS_MIN,
 439                  .max = G4X_M_SINGLE_CHANNEL_LVDS_MAX },
 440         .m1  = { .min = G4X_M1_SINGLE_CHANNEL_LVDS_MIN,
 441                  .max = G4X_M1_SINGLE_CHANNEL_LVDS_MAX },
 442         .m2  = { .min = G4X_M2_SINGLE_CHANNEL_LVDS_MIN,
 443                  .max = G4X_M2_SINGLE_CHANNEL_LVDS_MAX },
 444         .p   = { .min = G4X_P_SINGLE_CHANNEL_LVDS_MIN,
 445                  .max = G4X_P_SINGLE_CHANNEL_LVDS_MAX },
 446         .p1  = { .min = G4X_P1_SINGLE_CHANNEL_LVDS_MIN,
 447                  .max = G4X_P1_SINGLE_CHANNEL_LVDS_MAX },
 448         .p2  = { .dot_limit = G4X_P2_SINGLE_CHANNEL_LVDS_LIMIT,
 449                  .p2_slow = G4X_P2_SINGLE_CHANNEL_LVDS_SLOW,
 450                  .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST
 451         },
 452         .find_pll = intel_g4x_find_best_PLL,
 453 };
 454
 455 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
 456         .dot = { .min = G4X_DOT_DUAL_CHANNEL_LVDS_MIN,
 457                  .max = G4X_DOT_DUAL_CHANNEL_LVDS_MAX },
 458         .vco = { .min = G4X_VCO_MIN,
 459                  .max = G4X_VCO_MAX },
 460         .n   = { .min = G4X_N_DUAL_CHANNEL_LVDS_MIN,
 461                  .max = G4X_N_DUAL_CHANNEL_LVDS_MAX },
 462         .m   = { .min = G4X_M_DUAL_CHANNEL_LVDS_MIN,
 463                  .max = G4X_M_DUAL_CHANNEL_LVDS_MAX },
 464         .m1  = { .min = G4X_M1_DUAL_CHANNEL_LVDS_MIN,
 465                  .max = G4X_M1_DUAL_CHANNEL_LVDS_MAX },
 466         .m2  = { .min = G4X_M2_DUAL_CHANNEL_LVDS_MIN,
 467                  .max = G4X_M2_DUAL_CHANNEL_LVDS_MAX },
 468         .p   = { .min = G4X_P_DUAL_CHANNEL_LVDS_MIN,
 469                  .max = G4X_P_DUAL_CHANNEL_LVDS_MAX },
 470         .p1  = { .min = G4X_P1_DUAL_CHANNEL_LVDS_MIN,
 471                  .max = G4X_P1_DUAL_CHANNEL_LVDS_MAX },
 472         .p2  = { .dot_limit = G4X_P2_DUAL_CHANNEL_LVDS_LIMIT,
 473                  .p2_slow = G4X_P2_DUAL_CHANNEL_LVDS_SLOW,
 474                  .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST
 475         },
 476         .find_pll = intel_g4x_find_best_PLL,
 477 };
 478
 479 static const intel_limit_t intel_limits_g4x_display_port = {
 480         .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN,
 481                  .max = G4X_DOT_DISPLAY_PORT_MAX },
 482         .vco = { .min = G4X_VCO_MIN,
 483                  .max = G4X_VCO_MAX},
 484         .n   = { .min = G4X_N_DISPLAY_PORT_MIN,
 485                  .max = G4X_N_DISPLAY_PORT_MAX },
 486         .m   = { .min = G4X_M_DISPLAY_PORT_MIN,
 487                  .max = G4X_M_DISPLAY_PORT_MAX },
 488         .m1  = { .min = G4X_M1_DISPLAY_PORT_MIN,
 489                  .max = G4X_M1_DISPLAY_PORT_MAX },
 490         .m2  = { .min = G4X_M2_DISPLAY_PORT_MIN,
 491                  .max = G4X_M2_DISPLAY_PORT_MAX },
 492         .p   = { .min = G4X_P_DISPLAY_PORT_MIN,
 493                  .max = G4X_P_DISPLAY_PORT_MAX },
 494         .p1  = { .min = G4X_P1_DISPLAY_PORT_MIN,
 495                  .max = G4X_P1_DISPLAY_PORT_MAX},
 496         .p2  = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT,
 497                  .p2_slow = G4X_P2_DISPLAY_PORT_SLOW,
 498                  .p2_fast = G4X_P2_DISPLAY_PORT_FAST },
 499         .find_pll = intel_find_pll_g4x_dp,
 500 };
 501
 502 static const intel_limit_t intel_limits_pineview_sdvo = {
 503         .dot = { .min = I9XX_DOT_MIN,           .max = I9XX_DOT_MAX},
 504         .vco = { .min = PINEVIEW_VCO_MIN,               .max = PINEVIEW_VCO_MAX },
 505         .n   = { .min = PINEVIEW_N_MIN,         .max = PINEVIEW_N_MAX },
 506         .m   = { .min = PINEVIEW_M_MIN,         .max = PINEVIEW_M_MAX },
 507         .m1  = { .min = PINEVIEW_M1_MIN,                .max = PINEVIEW_M1_MAX },
 508         .m2  = { .min = PINEVIEW_M2_MIN,                .max = PINEVIEW_M2_MAX },
 509         .p   = { .min = I9XX_P_SDVO_DAC_MIN,    .max = I9XX_P_SDVO_DAC_MAX },
 510         .p1  = { .min = I9XX_P1_MIN,            .max = I9XX_P1_MAX },
 511         .p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
 512                  .p2_slow = I9XX_P2_SDVO_DAC_SLOW,      .p2_fast = I9XX_P2_SDVO_DAC_FAST },
 513         .find_pll = intel_find_best_PLL,
 514 };
 515
 516 static const intel_limit_t intel_limits_pineview_lvds = {
 517         .dot = { .min = I9XX_DOT_MIN,           .max = I9XX_DOT_MAX },
 518         .vco = { .min = PINEVIEW_VCO_MIN,               .max = PINEVIEW_VCO_MAX },
 519         .n   = { .min = PINEVIEW_N_MIN,         .max = PINEVIEW_N_MAX },
 520         .m   = { .min = PINEVIEW_M_MIN,         .max = PINEVIEW_M_MAX },
 521         .m1  = { .min = PINEVIEW_M1_MIN,                .max = PINEVIEW_M1_MAX },
 522         .m2  = { .min = PINEVIEW_M2_MIN,                .max = PINEVIEW_M2_MAX },
 523         .p   = { .min = PINEVIEW_P_LVDS_MIN,    .max = PINEVIEW_P_LVDS_MAX },
 524         .p1  = { .min = I9XX_P1_MIN,            .max = I9XX_P1_MAX },
 525         /* Pineview only supports single-channel mode. */
 526         .p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
 527                  .p2_slow = I9XX_P2_LVDS_SLOW,  .p2_fast = I9XX_P2_LVDS_SLOW },
 528         .find_pll = intel_find_best_PLL,
 529 };
 530
 531 static const intel_limit_t intel_limits_ironlake_dac = {
 532         .dot = { .min = IRONLAKE_DOT_MIN,          .max = IRONLAKE_DOT_MAX },
 533         .vco = { .min = IRONLAKE_VCO_MIN,          .max = IRONLAKE_VCO_MAX },
 534         .n   = { .min = IRONLAKE_DAC_N_MIN,        .max = IRONLAKE_DAC_N_MAX },
 535         .m   = { .min = IRONLAKE_DAC_M_MIN,        .max = IRONLAKE_DAC_M_MAX },
 536         .m1  = { .min = IRONLAKE_M1_MIN,           .max = IRONLAKE_M1_MAX },
 537         .m2  = { .min = IRONLAKE_M2_MIN,           .max = IRONLAKE_M2_MAX },
 538         .p   = { .min = IRONLAKE_DAC_P_MIN,        .max = IRONLAKE_DAC_P_MAX },
 539         .p1  = { .min = IRONLAKE_DAC_P1_MIN,       .max = IRONLAKE_DAC_P1_MAX },
 540         .p2  = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
 541                  .p2_slow = IRONLAKE_DAC_P2_SLOW,
 542                  .p2_fast = IRONLAKE_DAC_P2_FAST },
 543         .find_pll = intel_g4x_find_best_PLL,
 544 };
 545
 546 static const intel_limit_t intel_limits_ironlake_single_lvds = {
 547         .dot = { .min = IRONLAKE_DOT_MIN,          .max = IRONLAKE_DOT_MAX },
 548         .vco = { .min = IRONLAKE_VCO_MIN,          .max = IRONLAKE_VCO_MAX },
 549         .n   = { .min = IRONLAKE_LVDS_S_N_MIN,     .max = IRONLAKE_LVDS_S_N_MAX },
 550         .m   = { .min = IRONLAKE_LVDS_S_M_MIN,     .max = IRONLAKE_LVDS_S_M_MAX },
 551         .m1  = { .min = IRONLAKE_M1_MIN,           .max = IRONLAKE_M1_MAX },
 552         .m2  = { .min = IRONLAKE_M2_MIN,           .max = IRONLAKE_M2_MAX },
 553         .p   = { .min = IRONLAKE_LVDS_S_P_MIN,     .max = IRONLAKE_LVDS_S_P_MAX },
 554         .p1  = { .min = IRONLAKE_LVDS_S_P1_MIN,    .max = IRONLAKE_LVDS_S_P1_MAX },
 555         .p2  = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
 556                  .p2_slow = IRONLAKE_LVDS_S_P2_SLOW,
 557                  .p2_fast = IRONLAKE_LVDS_S_P2_FAST },
 558         .find_pll = intel_g4x_find_best_PLL,
 559 };
 560
 561 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
 562         .dot = { .min = IRONLAKE_DOT_MIN,          .max = IRONLAKE_DOT_MAX },
 563         .vco = { .min = IRONLAKE_VCO_MIN,          .max = IRONLAKE_VCO_MAX },
 564         .n   = { .min = IRONLAKE_LVDS_D_N_MIN,     .max = IRONLAKE_LVDS_D_N_MAX },
 565         .m   = { .min = IRONLAKE_LVDS_D_M_MIN,     .max = IRONLAKE_LVDS_D_M_MAX },
 566         .m1  = { .min = IRONLAKE_M1_MIN,           .max = IRONLAKE_M1_MAX },
 567         .m2  = { .min = IRONLAKE_M2_MIN,           .max = IRONLAKE_M2_MAX },
 568         .p   = { .min = IRONLAKE_LVDS_D_P_MIN,     .max = IRONLAKE_LVDS_D_P_MAX },
 569         .p1  = { .min = IRONLAKE_LVDS_D_P1_MIN,    .max = IRONLAKE_LVDS_D_P1_MAX },
 570         .p2  = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
 571                  .p2_slow = IRONLAKE_LVDS_D_P2_SLOW,
 572                  .p2_fast = IRONLAKE_LVDS_D_P2_FAST },
 573         .find_pll = intel_g4x_find_best_PLL,
 574 };
 575
 576 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
 577         .dot = { .min = IRONLAKE_DOT_MIN,          .max = IRONLAKE_DOT_MAX },
 578         .vco = { .min = IRONLAKE_VCO_MIN,          .max = IRONLAKE_VCO_MAX },
 579         .n   = { .min = IRONLAKE_LVDS_S_SSC_N_MIN, .max = IRONLAKE_LVDS_S_SSC_N_MAX },
 580         .m   = { .min = IRONLAKE_LVDS_S_SSC_M_MIN, .max = IRONLAKE_LVDS_S_SSC_M_MAX },
 581         .m1  = { .min = IRONLAKE_M1_MIN,           .max = IRONLAKE_M1_MAX },
 582         .m2  = { .min = IRONLAKE_M2_MIN,           .max = IRONLAKE_M2_MAX },
 583         .p   = { .min = IRONLAKE_LVDS_S_SSC_P_MIN, .max = IRONLAKE_LVDS_S_SSC_P_MAX },
 584         .p1  = { .min = IRONLAKE_LVDS_S_SSC_P1_MIN,.max = IRONLAKE_LVDS_S_SSC_P1_MAX },
 585         .p2  = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
 586                  .p2_slow = IRONLAKE_LVDS_S_SSC_P2_SLOW,
 587                  .p2_fast = IRONLAKE_LVDS_S_SSC_P2_FAST },
 588         .find_pll = intel_g4x_find_best_PLL,
 589 };
 590
 591 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
 592         .dot = { .min = IRONLAKE_DOT_MIN,          .max = IRONLAKE_DOT_MAX },
 593         .vco = { .min = IRONLAKE_VCO_MIN,          .max = IRONLAKE_VCO_MAX },
 594         .n   = { .min = IRONLAKE_LVDS_D_SSC_N_MIN, .max = IRONLAKE_LVDS_D_SSC_N_MAX },
 595         .m   = { .min = IRONLAKE_LVDS_D_SSC_M_MIN, .max = IRONLAKE_LVDS_D_SSC_M_MAX },
 596         .m1  = { .min = IRONLAKE_M1_MIN,           .max = IRONLAKE_M1_MAX },
 597         .m2  = { .min = IRONLAKE_M2_MIN,           .max = IRONLAKE_M2_MAX },
 598         .p   = { .min = IRONLAKE_LVDS_D_SSC_P_MIN, .max = IRONLAKE_LVDS_D_SSC_P_MAX },
 599         .p1  = { .min = IRONLAKE_LVDS_D_SSC_P1_MIN,.max = IRONLAKE_LVDS_D_SSC_P1_MAX },
 600         .p2  = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
 601                  .p2_slow = IRONLAKE_LVDS_D_SSC_P2_SLOW,
 602                  .p2_fast = IRONLAKE_LVDS_D_SSC_P2_FAST },
 603         .find_pll = intel_g4x_find_best_PLL,
 604 };
 605
 606 static const intel_limit_t intel_limits_ironlake_display_port = {
 607         .dot = { .min = IRONLAKE_DOT_MIN,
 608                  .max = IRONLAKE_DOT_MAX },
 609         .vco = { .min = IRONLAKE_VCO_MIN,
 610                  .max = IRONLAKE_VCO_MAX},
 611         .n   = { .min = IRONLAKE_DP_N_MIN,
 612                  .max = IRONLAKE_DP_N_MAX },
 613         .m   = { .min = IRONLAKE_DP_M_MIN,
 614                  .max = IRONLAKE_DP_M_MAX },
 615         .m1  = { .min = IRONLAKE_M1_MIN,
 616                  .max = IRONLAKE_M1_MAX },
 617         .m2  = { .min = IRONLAKE_M2_MIN,
 618                  .max = IRONLAKE_M2_MAX },
 619         .p   = { .min = IRONLAKE_DP_P_MIN,
 620                  .max = IRONLAKE_DP_P_MAX },
 621         .p1  = { .min = IRONLAKE_DP_P1_MIN,
 622                  .max = IRONLAKE_DP_P1_MAX},
 623         .p2  = { .dot_limit = IRONLAKE_DP_P2_LIMIT,
 624                  .p2_slow = IRONLAKE_DP_P2_SLOW,
 625                  .p2_fast = IRONLAKE_DP_P2_FAST },
 626         .find_pll = intel_find_pll_ironlake_dp,
 627 };
 628
 629 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc)
 630 {
 631         struct drm_device *dev = crtc->dev;
 632         struct drm_i915_private *dev_priv = dev->dev_private;
 633         const intel_limit_t *limit;
 634         int refclk = 120;
 635
 636         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 637                 if (dev_priv->lvds_use_ssc && dev_priv->lvds_ssc_freq == 100)
 638                         refclk = 100;
 639
 640                 if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
 641                     LVDS_CLKB_POWER_UP) {
 642                         /* LVDS dual channel */
 643                         if (refclk == 100)
 644                                 limit = &intel_limits_ironlake_dual_lvds_100m;
 645                         else
 646                                 limit = &intel_limits_ironlake_dual_lvds;
 647                 } else {
 648                         if (refclk == 100)
 649                                 limit = &intel_limits_ironlake_single_lvds_100m;
 650                         else
 651                                 limit = &intel_limits_ironlake_single_lvds;
 652                 }
 653         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
 654                         HAS_eDP)
 655                 limit = &intel_limits_ironlake_display_port;
 656         else
 657                 limit = &intel_limits_ironlake_dac;
 658
 659         return limit;
 660 }
 661
 662 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
 663 {
 664         struct drm_device *dev = crtc->dev;
 665         struct drm_i915_private *dev_priv = dev->dev_private;
 666         const intel_limit_t *limit;
 667
 668         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 669                 if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
 670                     LVDS_CLKB_POWER_UP)
 671                         /* LVDS with dual channel */
 672                         limit = &intel_limits_g4x_dual_channel_lvds;
 673                 else
 674                         /* LVDS with dual channel */
 675                         limit = &intel_limits_g4x_single_channel_lvds;
 676         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
 677                    intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
 678                 limit = &intel_limits_g4x_hdmi;
 679         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
 680                 limit = &intel_limits_g4x_sdvo;
 681         } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) {
 682                 limit = &intel_limits_g4x_display_port;
 683         } else /* The option is for other outputs */
 684                 limit = &intel_limits_i9xx_sdvo;
 685
 686         return limit;
 687 }
 688
 689 static const intel_limit_t *intel_limit(struct drm_crtc *crtc)
 690 {
 691         struct drm_device *dev = crtc->dev;
 692         const intel_limit_t *limit;
 693
 694         if (HAS_PCH_SPLIT(dev))
 695                 limit = intel_ironlake_limit(crtc);
 696         else if (IS_G4X(dev)) {
 697                 limit = intel_g4x_limit(crtc);
 698         } else if (IS_I9XX(dev) && !IS_PINEVIEW(dev)) {
 699                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 700                         limit = &intel_limits_i9xx_lvds;
 701                 else
 702                         limit = &intel_limits_i9xx_sdvo;
 703         } else if (IS_PINEVIEW(dev)) {
 704                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 705                         limit = &intel_limits_pineview_lvds;
 706                 else
 707                         limit = &intel_limits_pineview_sdvo;
 708         } else {
 709                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 710                         limit = &intel_limits_i8xx_lvds;
 711                 else
 712                         limit = &intel_limits_i8xx_dvo;
 713         }
 714         return limit;
 715 }
 716
 717 /* m1 is reserved as 0 in Pineview, n is a ring counter */
 718 static void pineview_clock(int refclk, intel_clock_t *clock)
 719 {
 720         clock->m = clock->m2 + 2;
 721         clock->p = clock->p1 * clock->p2;
 722         clock->vco = refclk * clock->m / clock->n;
 723         clock->dot = clock->vco / clock->p;
 724 }
 725
 726 static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock)
 727 {
 728         if (IS_PINEVIEW(dev)) {
 729                 pineview_clock(refclk, clock);
 730                 return;
 731         }
 732         clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
 733         clock->p = clock->p1 * clock->p2;
 734         clock->vco = refclk * clock->m / (clock->n + 2);
 735         clock->dot = clock->vco / clock->p;
 736 }
 737
 738 /**
 739  * Returns whether any output on the specified pipe is of the specified type
 740  */
 741 bool intel_pipe_has_type (struct drm_crtc *crtc, int type)
 742 {
 743     struct drm_device *dev = crtc->dev;
 744     struct drm_mode_config *mode_config = &dev->mode_config;
 745     struct drm_encoder *l_entry;
 746
 747     list_for_each_entry(l_entry, &mode_config->encoder_list, head) {
 748             if (l_entry && l_entry->crtc == crtc) {
 749                     struct intel_encoder *intel_encoder = enc_to_intel_encoder(l_entry);
 750                     if (intel_encoder->type == type)
 751                             return true;
 752             }
 753     }
 754     return false;
 755 }
 756
 757 #define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
 758 /**
 759  * Returns whether the given set of divisors are valid for a given refclk with
 760  * the given connectors.
 761  */
 762
 763 static bool intel_PLL_is_valid(struct drm_crtc *crtc, intel_clock_t *clock)
 764 {
 765         const intel_limit_t *limit = intel_limit (crtc);
 766         struct drm_device *dev = crtc->dev;
 767
 768         if (clock->p1  < limit->p1.min  || limit->p1.max  < clock->p1)
 769                 INTELPllInvalid ("p1 out of range\n");
 770         if (clock->p   < limit->p.min   || limit->p.max   < clock->p)
 771                 INTELPllInvalid ("p out of range\n");
 772         if (clock->m2  < limit->m2.min  || limit->m2.max  < clock->m2)
 773                 INTELPllInvalid ("m2 out of range\n");
 774         if (clock->m1  < limit->m1.min  || limit->m1.max  < clock->m1)
 775                 INTELPllInvalid ("m1 out of range\n");
 776         if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev))
 777                 INTELPllInvalid ("m1 <= m2\n");
 778         if (clock->m   < limit->m.min   || limit->m.max   < clock->m)
 779                 INTELPllInvalid ("m out of range\n");
 780         if (clock->n   < limit->n.min   || limit->n.max   < clock->n)
 781                 INTELPllInvalid ("n out of range\n");
 782         if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
 783                 INTELPllInvalid ("vco out of range\n");
 784         /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
 785          * connector, etc., rather than just a single range.
 786          */
 787         if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
 788                 INTELPllInvalid ("dot out of range\n");
 789
 790         return true;
 791 }
 792
 793 static bool
 794 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 795                     int target, int refclk, intel_clock_t *best_clock)
 796
 797 {
 798         struct drm_device *dev = crtc->dev;
 799         struct drm_i915_private *dev_priv = dev->dev_private;
 800         intel_clock_t clock;
 801         int err = target;
 802
 803         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
 804             (I915_READ(LVDS)) != 0) {
 805                 /*
 806                  * For LVDS, if the panel is on, just rely on its current
 807                  * settings for dual-channel.  We haven't figured out how to
 808                  * reliably set up different single/dual channel state, if we
 809                  * even can.
 810                  */
 811                 if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
 812                     LVDS_CLKB_POWER_UP)
 813                         clock.p2 = limit->p2.p2_fast;
 814                 else
 815                         clock.p2 = limit->p2.p2_slow;
 816         } else {
 817                 if (target < limit->p2.dot_limit)
 818                         clock.p2 = limit->p2.p2_slow;
 819                 else
 820                         clock.p2 = limit->p2.p2_fast;
 821         }
 822
 823         memset (best_clock, 0, sizeof (*best_clock));
 824
 825         for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
 826              clock.m1++) {
 827                 for (clock.m2 = limit->m2.min;
 828                      clock.m2 <= limit->m2.max; clock.m2++) {
 829                         /* m1 is always 0 in Pineview */
 830                         if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
 831                                 break;
 832                         for (clock.n = limit->n.min;
 833                              clock.n <= limit->n.max; clock.n++) {
 834                                 for (clock.p1 = limit->p1.min;
 835                                         clock.p1 <= limit->p1.max; clock.p1++) {
 836                                         int this_err;
 837
 838                                         intel_clock(dev, refclk, &clock);
 839
 840                                         if (!intel_PLL_is_valid(crtc, &clock))
 841                                                 continue;
 842
 843                                         this_err = abs(clock.dot - target);
 844                                         if (this_err < err) {
 845                                                 *best_clock = clock;
 846                                                 err = this_err;
 847                                         }
 848                                 }
 849                         }
 850                 }
 851         }
 852
 853         return (err != target);
 854 }
 855
 856 static bool
 857 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 858                         int target, int refclk, intel_clock_t *best_clock)
 859 {
 860         struct drm_device *dev = crtc->dev;
 861         struct drm_i915_private *dev_priv = dev->dev_private;
 862         intel_clock_t clock;
 863         int max_n;
 864         bool found;
 865         /* approximately equals target * 0.00585 */
 866         int err_most = (target >> 8) + (target >> 9);
 867         found = false;
 868
 869         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 870                 int lvds_reg;
 871
 872                 if (HAS_PCH_SPLIT(dev))
 873                         lvds_reg = PCH_LVDS;
 874                 else
 875                         lvds_reg = LVDS;
 876                 if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
 877                     LVDS_CLKB_POWER_UP)
 878                         clock.p2 = limit->p2.p2_fast;
 879                 else
 880                         clock.p2 = limit->p2.p2_slow;
 881         } else {
 882                 if (target < limit->p2.dot_limit)
 883                         clock.p2 = limit->p2.p2_slow;
 884                 else
 885                         clock.p2 = limit->p2.p2_fast;
 886         }
 887
 888         memset(best_clock, 0, sizeof(*best_clock));
 889         max_n = limit->n.max;
 890         /* based on hardware requirement, prefer smaller n to precision */
 891         for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
 892                 /* based on hardware requirement, prefere larger m1,m2 */
 893                 for (clock.m1 = limit->m1.max;
 894                      clock.m1 >= limit->m1.min; clock.m1--) {
 895                         for (clock.m2 = limit->m2.max;
 896                              clock.m2 >= limit->m2.min; clock.m2--) {
 897                                 for (clock.p1 = limit->p1.max;
 898                                      clock.p1 >= limit->p1.min; clock.p1--) {
 899                                         int this_err;
 900
 901                                         intel_clock(dev, refclk, &clock);
 902                                         if (!intel_PLL_is_valid(crtc, &clock))
 903                                                 continue;
 904                                         this_err = abs(clock.dot - target) ;
 905                                         if (this_err < err_most) {
 906                                                 *best_clock = clock;
 907                                                 err_most = this_err;
 908                                                 max_n = clock.n;
 909                                                 found = true;
 910                                         }
 911                                 }
 912                         }
 913                 }
 914         }
 915         return found;
 916 }
 917
 918 static bool
 919 intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
 920                            int target, int refclk, intel_clock_t *best_clock)
 921 {
 922         struct drm_device *dev = crtc->dev;
 923         intel_clock_t clock;
 924
 925         /* return directly when it is eDP */
 926         if (HAS_eDP)
 927                 return true;
 928
 929         if (target < 200000) {
 930                 clock.n = 1;
 931                 clock.p1 = 2;
 932                 clock.p2 = 10;
 933                 clock.m1 = 12;
 934                 clock.m2 = 9;
 935         } else {
 936                 clock.n = 2;
 937                 clock.p1 = 1;
 938                 clock.p2 = 10;
 939                 clock.m1 = 14;
 940                 clock.m2 = 8;
 941         }
 942         intel_clock(dev, refclk, &clock);
 943         memcpy(best_clock, &clock, sizeof(intel_clock_t));
 944         return true;
 945 }
 946
 947 /* DisplayPort has only two frequencies, 162MHz and 270MHz */
 948 static bool
 949 intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
 950                       int target, int refclk, intel_clock_t *best_clock)
 951 {
 952     intel_clock_t clock;
 953     if (target < 200000) {
 954         clock.p1 = 2;
 955         clock.p2 = 10;
 956         clock.n = 2;
 957         clock.m1 = 23;
 958         clock.m2 = 8;
 959     } else {
 960         clock.p1 = 1;
 961         clock.p2 = 10;
 962         clock.n = 1;
 963         clock.m1 = 14;
 964         clock.m2 = 2;
 965     }
 966     clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
 967     clock.p = (clock.p1 * clock.p2);
 968     clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
 969     clock.vco = 0;
 970     memcpy(best_clock, &clock, sizeof(intel_clock_t));
 971     return true;
 972 }
 973
 974 void
 975 intel_wait_for_vblank(struct drm_device *dev)
 976 {
 977         /* Wait for 20ms, i.e. one cycle at 50hz. */
 978         msleep(20);
 979 }
 980
 981 /* Parameters have changed, update FBC info */
 982 static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
 983 {
 984         struct drm_device *dev = crtc->dev;
 985         struct drm_i915_private *dev_priv = dev->dev_private;
 986         struct drm_framebuffer *fb = crtc->fb;
 987         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
 988         struct drm_i915_gem_object *obj_priv = to_intel_bo(intel_fb->obj);
 989         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 990         int plane, i;
 991         u32 fbc_ctl, fbc_ctl2;
 992
 993         dev_priv->cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE;
 994
 995         if (fb->pitch < dev_priv->cfb_pitch)
 996                 dev_priv->cfb_pitch = fb->pitch;
 997
 998         /* FBC_CTL wants 64B units */
 999         dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1;
1000         dev_priv->cfb_fence = obj_priv->fence_reg;
1001         dev_priv->cfb_plane = intel_crtc->plane;
1002         plane = dev_priv->cfb_plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB;
1003
1004         /* Clear old tags */
1005         for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++)
1006                 I915_WRITE(FBC_TAG + (i * 4), 0);
1007
1008         /* Set it up... */
1009         fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | plane;
1010         if (obj_priv->tiling_mode != I915_TILING_NONE)
1011                 fbc_ctl2 |= FBC_CTL_CPU_FENCE;
1012         I915_WRITE(FBC_CONTROL2, fbc_ctl2);
1013         I915_WRITE(FBC_FENCE_OFF, crtc->y);
1014
1015         /* enable it... */
1016         fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
1017         if (IS_I945GM(dev))
1018                 fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */
1019         fbc_ctl |= (dev_priv->cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
1020         fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
1021         if (obj_priv->tiling_mode != I915_TILING_NONE)
1022                 fbc_ctl |= dev_priv->cfb_fence;
1023         I915_WRITE(FBC_CONTROL, fbc_ctl);
1024
1025         DRM_DEBUG_KMS("enabled FBC, pitch %ld, yoff %d, plane %d, ",
1026                   dev_priv->cfb_pitch, crtc->y, dev_priv->cfb_plane);
1027 }
1028
1029 void i8xx_disable_fbc(struct drm_device *dev)
1030 {
1031         struct drm_i915_private *dev_priv = dev->dev_private;
1032         unsigned long timeout = jiffies + msecs_to_jiffies(1);
1033         u32 fbc_ctl;
1034
1035         if (!I915_HAS_FBC(dev))
1036                 return;
1037
1038         if (!(I915_READ(FBC_CONTROL) & FBC_CTL_EN))
1039                 return; /* Already off, just return */
1040
1041         /* Disable compression */
1042         fbc_ctl = I915_READ(FBC_CONTROL);
1043         fbc_ctl &= ~FBC_CTL_EN;
1044         I915_WRITE(FBC_CONTROL, fbc_ctl);
1045
1046         /* Wait for compressing bit to clear */
1047         while (I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) {
1048                 if (time_after(jiffies, timeout)) {
1049                         DRM_DEBUG_DRIVER("FBC idle timed out\n");
1050                         break;
1051                 }
1052                 ; /* do nothing */
1053         }
1054
1055         intel_wait_for_vblank(dev);
1056
1057         DRM_DEBUG_KMS("disabled FBC\n");
1058 }
1059
1060 static bool i8xx_fbc_enabled(struct drm_device *dev)
1061 {
1062         struct drm_i915_private *dev_priv = dev->dev_private;
1063
1064         return I915_READ(FBC_CONTROL) & FBC_CTL_EN;
1065 }
1066
1067 static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
1068 {
1069         struct drm_device *dev = crtc->dev;
1070         struct drm_i915_private *dev_priv = dev->dev_private;
1071         struct drm_framebuffer *fb = crtc->fb;
1072         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
1073         struct drm_i915_gem_object *obj_priv = to_intel_bo(intel_fb->obj);
1074         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1075         int plane = (intel_crtc->plane == 0 ? DPFC_CTL_PLANEA :
1076                      DPFC_CTL_PLANEB);
1077         unsigned long stall_watermark = 200;
1078         u32 dpfc_ctl;
1079
1080         dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1;
1081         dev_priv->cfb_fence = obj_priv->fence_reg;
1082         dev_priv->cfb_plane = intel_crtc->plane;
1083
1084         dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X;
1085         if (obj_priv->tiling_mode != I915_TILING_NONE) {
1086                 dpfc_ctl |= DPFC_CTL_FENCE_EN | dev_priv->cfb_fence;
1087                 I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY);
1088         } else {
1089                 I915_WRITE(DPFC_CHICKEN, ~DPFC_HT_MODIFY);
1090         }
1091
1092         I915_WRITE(DPFC_CONTROL, dpfc_ctl);
1093         I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
1094                    (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
1095                    (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
1096         I915_WRITE(DPFC_FENCE_YOFF, crtc->y);
1097
1098         /* enable it... */
1099         I915_WRITE(DPFC_CONTROL, I915_READ(DPFC_CONTROL) | DPFC_CTL_EN);
1100
1101         DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
1102 }
1103
1104 void g4x_disable_fbc(struct drm_device *dev)
1105 {
1106         struct drm_i915_private *dev_priv = dev->dev_private;
1107         u32 dpfc_ctl;
1108
1109         /* Disable compression */
1110         dpfc_ctl = I915_READ(DPFC_CONTROL);
1111         dpfc_ctl &= ~DPFC_CTL_EN;
1112         I915_WRITE(DPFC_CONTROL, dpfc_ctl);
1113         intel_wait_for_vblank(dev);
1114
1115         DRM_DEBUG_KMS("disabled FBC\n");
1116 }
1117
1118 static bool g4x_fbc_enabled(struct drm_device *dev)
1119 {
1120         struct drm_i915_private *dev_priv = dev->dev_private;
1121
1122         return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN;
1123 }
1124
1125 bool intel_fbc_enabled(struct drm_device *dev)
1126 {
1127         struct drm_i915_private *dev_priv = dev->dev_private;
1128
1129         if (!dev_priv->display.fbc_enabled)
1130                 return false;
1131
1132         return dev_priv->display.fbc_enabled(dev);
1133 }
1134
1135 void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
1136 {
1137         struct drm_i915_private *dev_priv = crtc->dev->dev_private;
1138
1139         if (!dev_priv->display.enable_fbc)
1140                 return;
1141
1142         dev_priv->display.enable_fbc(crtc, interval);
1143 }
1144
1145 void intel_disable_fbc(struct drm_device *dev)
1146 {
1147         struct drm_i915_private *dev_priv = dev->dev_private;
1148
1149         if (!dev_priv->display.disable_fbc)
1150                 return;
1151
1152         dev_priv->display.disable_fbc(dev);
1153 }
1154
1155 /**
1156  * intel_update_fbc - enable/disable FBC as needed
1157  * @crtc: CRTC to point the compressor at
1158  * @mode: mode in use
1159  *
1160  * Set up the framebuffer compression hardware at mode set time.  We
1161  * enable it if possible:
1162  *   - plane A only (on pre-965)
1163  *   - no pixel mulitply/line duplication
1164  *   - no alpha buffer discard
1165  *   - no dual wide
1166  *   - framebuffer <= 2048 in width, 1536 in height
1167  *
1168  * We can't assume that any compression will take place (worst case),
1169  * so the compressed buffer has to be the same size as the uncompressed
1170  * one.  It also must reside (along with the line length buffer) in
1171  * stolen memory.
1172  *
1173  * We need to enable/disable FBC on a global basis.
1174  */
1175 static void intel_update_fbc(struct drm_crtc *crtc,
1176                              struct drm_display_mode *mode)
1177 {
1178         struct drm_device *dev = crtc->dev;
1179         struct drm_i915_private *dev_priv = dev->dev_private;
1180         struct drm_framebuffer *fb = crtc->fb;
1181         struct intel_framebuffer *intel_fb;
1182         struct drm_i915_gem_object *obj_priv;
1183         struct drm_crtc *tmp_crtc;
1184         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1185         int plane = intel_crtc->plane;
1186         int crtcs_enabled = 0;
1187
1188         DRM_DEBUG_KMS("\n");
1189
1190         if (!i915_powersave)
1191                 return;
1192
1193         if (!I915_HAS_FBC(dev))
1194                 return;
1195
1196         if (!crtc->fb)
1197                 return;
1198
1199         intel_fb = to_intel_framebuffer(fb);
1200         obj_priv = to_intel_bo(intel_fb->obj);
1201
1202         /*
1203          * If FBC is already on, we just have to verify that we can
1204          * keep it that way...
1205          * Need to disable if:
1206          *   - more than one pipe is active
1207          *   - changing FBC params (stride, fence, mode)
1208          *   - new fb is too large to fit in compressed buffer
1209          *   - going to an unsupported config (interlace, pixel multiply, etc.)
1210          */
1211         list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) {
1212                 if (tmp_crtc->enabled)
1213                         crtcs_enabled++;
1214         }
1215         DRM_DEBUG_KMS("%d pipes active\n", crtcs_enabled);
1216         if (crtcs_enabled > 1) {
1217                 DRM_DEBUG_KMS("more than one pipe active, disabling compression\n");
1218                 dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES;
1219                 goto out_disable;
1220         }
1221         if (intel_fb->obj->size > dev_priv->cfb_size) {
1222                 DRM_DEBUG_KMS("framebuffer too large, disabling "
1223                                 "compression\n");
1224                 dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
1225                 goto out_disable;
1226         }
1227         if ((mode->flags & DRM_MODE_FLAG_INTERLACE) ||
1228             (mode->flags & DRM_MODE_FLAG_DBLSCAN)) {
1229                 DRM_DEBUG_KMS("mode incompatible with compression, "
1230                                 "disabling\n");
1231                 dev_priv->no_fbc_reason = FBC_UNSUPPORTED_MODE;
1232                 goto out_disable;
1233         }
1234         if ((mode->hdisplay > 2048) ||
1235             (mode->vdisplay > 1536)) {
1236                 DRM_DEBUG_KMS("mode too large for compression, disabling\n");
1237                 dev_priv->no_fbc_reason = FBC_MODE_TOO_LARGE;
1238                 goto out_disable;
1239         }
1240         if ((IS_I915GM(dev) || IS_I945GM(dev)) && plane != 0) {
1241                 DRM_DEBUG_KMS("plane not 0, disabling compression\n");
1242                 dev_priv->no_fbc_reason = FBC_BAD_PLANE;
1243                 goto out_disable;
1244         }
1245         if (obj_priv->tiling_mode != I915_TILING_X) {
1246                 DRM_DEBUG_KMS("framebuffer not tiled, disabling compression\n");
1247                 dev_priv->no_fbc_reason = FBC_NOT_TILED;
1248                 goto out_disable;
1249         }
1250
1251         if (intel_fbc_enabled(dev)) {
1252                 /* We can re-enable it in this case, but need to update pitch */
1253                 if ((fb->pitch > dev_priv->cfb_pitch) ||
1254                     (obj_priv->fence_reg != dev_priv->cfb_fence) ||
1255                     (plane != dev_priv->cfb_plane))
1256                         intel_disable_fbc(dev);
1257         }
1258
1259         /* Now try to turn it back on if possible */
1260         if (!intel_fbc_enabled(dev))
1261                 intel_enable_fbc(crtc, 500);
1262
1263         return;
1264
1265 out_disable:
1266         /* Multiple disables should be harmless */
1267         if (intel_fbc_enabled(dev)) {
1268                 DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
1269                 intel_disable_fbc(dev);
1270         }
1271 }
1272
1273 int
1274 intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj)
1275 {
1276         struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
1277         u32 alignment;
1278         int ret;
1279
1280         switch (obj_priv->tiling_mode) {
1281         case I915_TILING_NONE:
1282                 alignment = 64 * 1024;
1283                 break;
1284         case I915_TILING_X:
1285                 /* pin() will align the object as required by fence */
1286                 alignment = 0;
1287                 break;
1288         case I915_TILING_Y:
1289                 /* FIXME: Is this true? */
1290                 DRM_ERROR("Y tiled not allowed for scan out buffers\n");
1291                 return -EINVAL;
1292         default:
1293                 BUG();
1294         }
1295
1296         ret = i915_gem_object_pin(obj, alignment);
1297         if (ret != 0)
1298                 return ret;
1299
1300         /* Install a fence for tiled scan-out. Pre-i965 always needs a
1301          * fence, whereas 965+ only requires a fence if using
1302          * framebuffer compression.  For simplicity, we always install
1303          * a fence as the cost is not that onerous.
1304          */
1305         if (obj_priv->fence_reg == I915_FENCE_REG_NONE &&
1306             obj_priv->tiling_mode != I915_TILING_NONE) {
1307                 ret = i915_gem_object_get_fence_reg(obj);
1308                 if (ret != 0) {
1309                         i915_gem_object_unpin(obj);
1310                         return ret;
1311                 }
1312         }
1313
1314         return 0;
1315 }
1316
1317 static int
1318 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
1319                     struct drm_framebuffer *old_fb)
1320 {
1321         struct drm_device *dev = crtc->dev;
1322         struct drm_i915_private *dev_priv = dev->dev_private;
1323         struct drm_i915_master_private *master_priv;
1324         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1325         struct intel_framebuffer *intel_fb;
1326         struct drm_i915_gem_object *obj_priv;
1327         struct drm_gem_object *obj;
1328         int pipe = intel_crtc->pipe;
1329         int plane = intel_crtc->plane;
1330         unsigned long Start, Offset;
1331         int dspbase = (plane == 0 ? DSPAADDR : DSPBADDR);
1332         int dspsurf = (plane == 0 ? DSPASURF : DSPBSURF);
1333         int dspstride = (plane == 0) ? DSPASTRIDE : DSPBSTRIDE;
1334         int dsptileoff = (plane == 0 ? DSPATILEOFF : DSPBTILEOFF);
1335         int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
1336         u32 dspcntr;
1337         int ret;
1338
1339         /* no fb bound */
1340         if (!crtc->fb) {
1341                 DRM_DEBUG_KMS("No FB bound\n");
1342                 return 0;
1343         }
1344
1345         switch (plane) {
1346         case 0:
1347         case 1:
1348                 break;
1349         default:
1350                 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
1351                 return -EINVAL;
1352         }
1353
1354         intel_fb = to_intel_framebuffer(crtc->fb);
1355         obj = intel_fb->obj;
1356         obj_priv = to_intel_bo(obj);
1357
1358         mutex_lock(&dev->struct_mutex);
1359         ret = intel_pin_and_fence_fb_obj(dev, obj);
1360         if (ret != 0) {
1361                 mutex_unlock(&dev->struct_mutex);
1362                 return ret;
1363         }
1364
1365         ret = i915_gem_object_set_to_display_plane(obj);
1366         if (ret != 0) {
1367                 i915_gem_object_unpin(obj);
1368                 mutex_unlock(&dev->struct_mutex);
1369                 return ret;
1370         }
1371
1372         dspcntr = I915_READ(dspcntr_reg);
1373         /* Mask out pixel format bits in case we change it */
1374         dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
1375         switch (crtc->fb->bits_per_pixel) {
1376         case 8:
1377                 dspcntr |= DISPPLANE_8BPP;
1378                 break;
1379         case 16:
1380                 if (crtc->fb->depth == 15)
1381                         dspcntr |= DISPPLANE_15_16BPP;
1382                 else
1383                         dspcntr |= DISPPLANE_16BPP;
1384                 break;
1385         case 24:
1386         case 32:
1387                 if (crtc->fb->depth == 30)
1388                         dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA;
1389                 else
1390                         dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
1391                 break;
1392         default:
1393                 DRM_ERROR("Unknown color depth\n");
1394                 i915_gem_object_unpin(obj);
1395                 mutex_unlock(&dev->struct_mutex);
1396                 return -EINVAL;
1397         }
1398         if (IS_I965G(dev)) {
1399                 if (obj_priv->tiling_mode != I915_TILING_NONE)
1400                         dspcntr |= DISPPLANE_TILED;
1401                 else
1402                         dspcntr &= ~DISPPLANE_TILED;
1403         }
1404
1405         if (HAS_PCH_SPLIT(dev))
1406                 /* must disable */
1407                 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
1408
1409         I915_WRITE(dspcntr_reg, dspcntr);
1410
1411         Start = obj_priv->gtt_offset;
1412         Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
1413
1414         DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
1415                       Start, Offset, x, y, crtc->fb->pitch);
1416         I915_WRITE(dspstride, crtc->fb->pitch);
1417         if (IS_I965G(dev)) {
1418                 I915_WRITE(dspbase, Offset);
1419                 I915_READ(dspbase);
1420                 I915_WRITE(dspsurf, Start);
1421                 I915_READ(dspsurf);
1422                 I915_WRITE(dsptileoff, (y << 16) | x);
1423         } else {
1424                 I915_WRITE(dspbase, Start + Offset);
1425                 I915_READ(dspbase);
1426         }
1427
1428         if ((IS_I965G(dev) || plane == 0))
1429                 intel_update_fbc(crtc, &crtc->mode);
1430
1431         intel_wait_for_vblank(dev);
1432
1433         if (old_fb) {
1434                 intel_fb = to_intel_framebuffer(old_fb);
1435                 obj_priv = to_intel_bo(intel_fb->obj);
1436                 i915_gem_object_unpin(intel_fb->obj);
1437         }
1438         intel_increase_pllclock(crtc, true);
1439
1440         mutex_unlock(&dev->struct_mutex);
1441
1442         if (!dev->primary->master)
1443                 return 0;
1444
1445         master_priv = dev->primary->master->driver_priv;
1446         if (!master_priv->sarea_priv)
1447                 return 0;
1448
1449         if (pipe) {
1450                 master_priv->sarea_priv->pipeB_x = x;
1451                 master_priv->sarea_priv->pipeB_y = y;
1452         } else {
1453                 master_priv->sarea_priv->pipeA_x = x;
1454                 master_priv->sarea_priv->pipeA_y = y;
1455         }
1456
1457         return 0;
1458 }
1459
1460 /* Disable the VGA plane that we never use */
1461 static void i915_disable_vga (struct drm_device *dev)
1462 {
1463         struct drm_i915_private *dev_priv = dev->dev_private;
1464         u8 sr1;
1465         u32 vga_reg;
1466
1467         if (HAS_PCH_SPLIT(dev))
1468                 vga_reg = CPU_VGACNTRL;
1469         else
1470                 vga_reg = VGACNTRL;
1471
1472         if (I915_READ(vga_reg) & VGA_DISP_DISABLE)
1473                 return;
1474
1475         I915_WRITE8(VGA_SR_INDEX, 1);
1476         sr1 = I915_READ8(VGA_SR_DATA);
1477         I915_WRITE8(VGA_SR_DATA, sr1 | (1 << 5));
1478         udelay(100);
1479
1480         I915_WRITE(vga_reg, VGA_DISP_DISABLE);
1481 }
1482
1483 static void ironlake_disable_pll_edp (struct drm_crtc *crtc)
1484 {
1485         struct drm_device *dev = crtc->dev;
1486         struct drm_i915_private *dev_priv = dev->dev_private;
1487         u32 dpa_ctl;
1488
1489         DRM_DEBUG_KMS("\n");
1490         dpa_ctl = I915_READ(DP_A);
1491         dpa_ctl &= ~DP_PLL_ENABLE;
1492         I915_WRITE(DP_A, dpa_ctl);
1493 }
1494
1495 static void ironlake_enable_pll_edp (struct drm_crtc *crtc)
1496 {
1497         struct drm_device *dev = crtc->dev;
1498         struct drm_i915_private *dev_priv = dev->dev_private;
1499         u32 dpa_ctl;
1500
1501         dpa_ctl = I915_READ(DP_A);
1502         dpa_ctl |= DP_PLL_ENABLE;
1503         I915_WRITE(DP_A, dpa_ctl);
1504         udelay(200);
1505 }
1506
1507
1508 static void ironlake_set_pll_edp (struct drm_crtc *crtc, int clock)
1509 {
1510         struct drm_device *dev = crtc->dev;
1511         struct drm_i915_private *dev_priv = dev->dev_private;
1512         u32 dpa_ctl;
1513
1514         DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
1515         dpa_ctl = I915_READ(DP_A);
1516         dpa_ctl &= ~DP_PLL_FREQ_MASK;
1517
1518         if (clock < 200000) {
1519                 u32 temp;
1520                 dpa_ctl |= DP_PLL_FREQ_160MHZ;
1521                 /* workaround for 160Mhz:
1522                    1) program 0x4600c bits 15:0 = 0x8124
1523                    2) program 0x46010 bit 0 = 1
1524                    3) program 0x46034 bit 24 = 1
1525                    4) program 0x64000 bit 14 = 1
1526                    */
1527                 temp = I915_READ(0x4600c);
1528                 temp &= 0xffff0000;
1529                 I915_WRITE(0x4600c, temp | 0x8124);
1530
1531                 temp = I915_READ(0x46010);
1532                 I915_WRITE(0x46010, temp | 1);
1533
1534                 temp = I915_READ(0x46034);
1535                 I915_WRITE(0x46034, temp | (1 << 24));
1536         } else {
1537                 dpa_ctl |= DP_PLL_FREQ_270MHZ;
1538         }
1539         I915_WRITE(DP_A, dpa_ctl);
1540
1541         udelay(500);
1542 }
1543
1544 /* The FDI link training functions for ILK/Ibexpeak. */
1545 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
1546 {
1547         struct drm_device *dev = crtc->dev;
1548         struct drm_i915_private *dev_priv = dev->dev_private;
1549         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1550         int pipe = intel_crtc->pipe;
1551         int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL;
1552         int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
1553         int fdi_rx_iir_reg = (pipe == 0) ? FDI_RXA_IIR : FDI_RXB_IIR;
1554         int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR;
1555         u32 temp, tries = 0;
1556
1557         /* enable CPU FDI TX and PCH FDI RX */
1558         temp = I915_READ(fdi_tx_reg);
1559         temp |= FDI_TX_ENABLE;
1560         temp &= ~(7 << 19);
1561         temp |= (intel_crtc->fdi_lanes - 1) << 19;
1562         temp &= ~FDI_LINK_TRAIN_NONE;
1563         temp |= FDI_LINK_TRAIN_PATTERN_1;
1564         I915_WRITE(fdi_tx_reg, temp);
1565         I915_READ(fdi_tx_reg);
1566
1567         temp = I915_READ(fdi_rx_reg);
1568         temp &= ~FDI_LINK_TRAIN_NONE;
1569         temp |= FDI_LINK_TRAIN_PATTERN_1;
1570         I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
1571         I915_READ(fdi_rx_reg);
1572         udelay(150);
1573
1574         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
1575            for train result */
1576         temp = I915_READ(fdi_rx_imr_reg);
1577         temp &= ~FDI_RX_SYMBOL_LOCK;
1578         temp &= ~FDI_RX_BIT_LOCK;
1579         I915_WRITE(fdi_rx_imr_reg, temp);
1580         I915_READ(fdi_rx_imr_reg);
1581         udelay(150);
1582
1583         for (;;) {
1584                 temp = I915_READ(fdi_rx_iir_reg);
1585                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
1586
1587                 if ((temp & FDI_RX_BIT_LOCK)) {
1588                         DRM_DEBUG_KMS("FDI train 1 done.\n");
1589                         I915_WRITE(fdi_rx_iir_reg,
1590                                    temp | FDI_RX_BIT_LOCK);
1591                         break;
1592                 }
1593
1594                 tries++;
1595
1596                 if (tries > 5) {
1597                         DRM_DEBUG_KMS("FDI train 1 fail!\n");
1598                         break;
1599                 }
1600         }
1601
1602         /* Train 2 */
1603         temp = I915_READ(fdi_tx_reg);
1604         temp &= ~FDI_LINK_TRAIN_NONE;
1605         temp |= FDI_LINK_TRAIN_PATTERN_2;
1606         I915_WRITE(fdi_tx_reg, temp);
1607
1608         temp = I915_READ(fdi_rx_reg);
1609         temp &= ~FDI_LINK_TRAIN_NONE;
1610         temp |= FDI_LINK_TRAIN_PATTERN_2;
1611         I915_WRITE(fdi_rx_reg, temp);
1612         udelay(150);
1613
1614         tries = 0;
1615
1616         for (;;) {
1617                 temp = I915_READ(fdi_rx_iir_reg);
1618                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
1619
1620                 if (temp & FDI_RX_SYMBOL_LOCK) {
1621                         I915_WRITE(fdi_rx_iir_reg,
1622                                    temp | FDI_RX_SYMBOL_LOCK);
1623                         DRM_DEBUG_KMS("FDI train 2 done.\n");
1624                         break;
1625                 }
1626
1627                 tries++;
1628
1629                 if (tries > 5) {
1630                         DRM_DEBUG_KMS("FDI train 2 fail!\n");
1631                         break;
1632                 }
1633         }
1634
1635         DRM_DEBUG_KMS("FDI train done\n");
1636 }
1637
1638 static int snb_b_fdi_train_param [] = {
1639         FDI_LINK_TRAIN_400MV_0DB_SNB_B,
1640         FDI_LINK_TRAIN_400MV_6DB_SNB_B,
1641         FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
1642         FDI_LINK_TRAIN_800MV_0DB_SNB_B,
1643 };
1644
1645 /* The FDI link training functions for SNB/Cougarpoint. */
1646 static void gen6_fdi_link_train(struct drm_crtc *crtc)
1647 {
1648         struct drm_device *dev = crtc->dev;
1649         struct drm_i915_private *dev_priv = dev->dev_private;
1650         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1651         int pipe = intel_crtc->pipe;
1652         int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL;
1653         int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
1654         int fdi_rx_iir_reg = (pipe == 0) ? FDI_RXA_IIR : FDI_RXB_IIR;
1655         int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR;
1656         u32 temp, i;
1657
1658         /* enable CPU FDI TX and PCH FDI RX */
1659         temp = I915_READ(fdi_tx_reg);
1660         temp |= FDI_TX_ENABLE;
1661         temp &= ~(7 << 19);
1662         temp |= (intel_crtc->fdi_lanes - 1) << 19;
1663         temp &= ~FDI_LINK_TRAIN_NONE;
1664         temp |= FDI_LINK_TRAIN_PATTERN_1;
1665         temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
1666         /* SNB-B */
1667         temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
1668         I915_WRITE(fdi_tx_reg, temp);
1669         I915_READ(fdi_tx_reg);
1670
1671         temp = I915_READ(fdi_rx_reg);
1672         if (HAS_PCH_CPT(dev)) {
1673                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
1674                 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
1675         } else {
1676                 temp &= ~FDI_LINK_TRAIN_NONE;
1677                 temp |= FDI_LINK_TRAIN_PATTERN_1;
1678         }
1679         I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
1680         I915_READ(fdi_rx_reg);
1681         udelay(150);
1682
1683         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
1684            for train result */
1685         temp = I915_READ(fdi_rx_imr_reg);
1686         temp &= ~FDI_RX_SYMBOL_LOCK;
1687         temp &= ~FDI_RX_BIT_LOCK;
1688         I915_WRITE(fdi_rx_imr_reg, temp);
1689         I915_READ(fdi_rx_imr_reg);
1690         udelay(150);
1691
1692         for (i = 0; i < 4; i++ ) {
1693                 temp = I915_READ(fdi_tx_reg);
1694                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
1695                 temp |= snb_b_fdi_train_param[i];
1696                 I915_WRITE(fdi_tx_reg, temp);
1697                 udelay(500);
1698
1699                 temp = I915_READ(fdi_rx_iir_reg);
1700                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
1701
1702                 if (temp & FDI_RX_BIT_LOCK) {
1703                         I915_WRITE(fdi_rx_iir_reg,
1704                                    temp | FDI_RX_BIT_LOCK);
1705                         DRM_DEBUG_KMS("FDI train 1 done.\n");
1706                         break;
1707                 }
1708         }
1709         if (i == 4)
1710                 DRM_DEBUG_KMS("FDI train 1 fail!\n");
1711
1712         /* Train 2 */
1713         temp = I915_READ(fdi_tx_reg);
1714         temp &= ~FDI_LINK_TRAIN_NONE;
1715         temp |= FDI_LINK_TRAIN_PATTERN_2;
1716         if (IS_GEN6(dev)) {
1717                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
1718                 /* SNB-B */
1719                 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
1720         }
1721         I915_WRITE(fdi_tx_reg, temp);
1722
1723         temp = I915_READ(fdi_rx_reg);
1724         if (HAS_PCH_CPT(dev)) {
1725                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
1726                 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
1727         } else {
1728                 temp &= ~FDI_LINK_TRAIN_NONE;
1729                 temp |= FDI_LINK_TRAIN_PATTERN_2;
1730         }
1731         I915_WRITE(fdi_rx_reg, temp);
1732         udelay(150);
1733
1734         for (i = 0; i < 4; i++ ) {
1735                 temp = I915_READ(fdi_tx_reg);
1736                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
1737                 temp |= snb_b_fdi_train_param[i];
1738                 I915_WRITE(fdi_tx_reg, temp);
1739                 udelay(500);
1740
1741                 temp = I915_READ(fdi_rx_iir_reg);
1742                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
1743
1744                 if (temp & FDI_RX_SYMBOL_LOCK) {
1745                         I915_WRITE(fdi_rx_iir_reg,
1746                                    temp | FDI_RX_SYMBOL_LOCK);
1747                         DRM_DEBUG_KMS("FDI train 2 done.\n");
1748                         break;
1749                 }
1750         }
1751         if (i == 4)
1752                 DRM_DEBUG_KMS("FDI train 2 fail!\n");
1753
1754         DRM_DEBUG_KMS("FDI train done.\n");
1755 }
1756
1757 static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
1758 {
1759         struct drm_device *dev = crtc->dev;
1760         struct drm_i915_private *dev_priv = dev->dev_private;
1761         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1762         int pipe = intel_crtc->pipe;
1763         int plane = intel_crtc->plane;
1764         int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
1765         int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
1766         int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
1767         int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR;
1768         int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL;
1769         int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
1770         int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
1771         int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1;
1772         int pf_win_size = (pipe == 0) ? PFA_WIN_SZ : PFB_WIN_SZ;
1773         int pf_win_pos = (pipe == 0) ? PFA_WIN_POS : PFB_WIN_POS;
1774         int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
1775         int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
1776         int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
1777         int cpu_vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
1778         int cpu_vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
1779         int cpu_vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
1780         int trans_htot_reg = (pipe == 0) ? TRANS_HTOTAL_A : TRANS_HTOTAL_B;
1781         int trans_hblank_reg = (pipe == 0) ? TRANS_HBLANK_A : TRANS_HBLANK_B;
1782         int trans_hsync_reg = (pipe == 0) ? TRANS_HSYNC_A : TRANS_HSYNC_B;
1783         int trans_vtot_reg = (pipe == 0) ? TRANS_VTOTAL_A : TRANS_VTOTAL_B;
1784         int trans_vblank_reg = (pipe == 0) ? TRANS_VBLANK_A : TRANS_VBLANK_B;
1785         int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
1786         int trans_dpll_sel = (pipe == 0) ? 0 : 1;
1787         u32 temp;
1788         int n;
1789         u32 pipe_bpc;
1790
1791         temp = I915_READ(pipeconf_reg);
1792         pipe_bpc = temp & PIPE_BPC_MASK;
1793
1794         /* XXX: When our outputs are all unaware of DPMS modes other than off
1795          * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
1796          */
1797         switch (mode) {
1798         case DRM_MODE_DPMS_ON:
1799         case DRM_MODE_DPMS_STANDBY:
1800         case DRM_MODE_DPMS_SUSPEND:
1801                 DRM_DEBUG_KMS("crtc %d dpms on\n", pipe);
1802
1803                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
1804                         temp = I915_READ(PCH_LVDS);
1805                         if ((temp & LVDS_PORT_EN) == 0) {
1806                                 I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
1807                                 POSTING_READ(PCH_LVDS);
1808                         }
1809                 }
1810
1811                 if (HAS_eDP) {
1812                         /* enable eDP PLL */
1813                         ironlake_enable_pll_edp(crtc);
1814                 } else {
1815
1816                         /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
1817                         temp = I915_READ(fdi_rx_reg);
1818                         /*
1819                          * make the BPC in FDI Rx be consistent with that in
1820                          * pipeconf reg.
1821                          */
1822                         temp &= ~(0x7 << 16);
1823                         temp |= (pipe_bpc << 11);
1824                         temp &= ~(7 << 19);
1825                         temp |= (intel_crtc->fdi_lanes - 1) << 19;
1826                         I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
1827                         I915_READ(fdi_rx_reg);
1828                         udelay(200);
1829
1830                         /* Switch from Rawclk to PCDclk */
1831                         temp = I915_READ(fdi_rx_reg);
1832                         I915_WRITE(fdi_rx_reg, temp | FDI_SEL_PCDCLK);
1833                         I915_READ(fdi_rx_reg);
1834                         udelay(200);
1835
1836                         /* Enable CPU FDI TX PLL, always on for Ironlake */
1837                         temp = I915_READ(fdi_tx_reg);
1838                         if ((temp & FDI_TX_PLL_ENABLE) == 0) {
1839                                 I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
1840                                 I915_READ(fdi_tx_reg);
1841                                 udelay(100);
1842                         }
1843                 }
1844
1845                 /* Enable panel fitting for LVDS */
1846                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
1847                         temp = I915_READ(pf_ctl_reg);
1848                         I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3);
1849
1850                         /* currently full aspect */
1851                         I915_WRITE(pf_win_pos, 0);
1852
1853                         I915_WRITE(pf_win_size,
1854                                    (dev_priv->panel_fixed_mode->hdisplay << 16) |
1855                                    (dev_priv->panel_fixed_mode->vdisplay));
1856                 }
1857
1858                 /* Enable CPU pipe */
1859                 temp = I915_READ(pipeconf_reg);
1860                 if ((temp & PIPEACONF_ENABLE) == 0) {
1861                         I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
1862                         I915_READ(pipeconf_reg);
1863                         udelay(100);
1864                 }
1865
1866                 /* configure and enable CPU plane */
1867                 temp = I915_READ(dspcntr_reg);
1868                 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
1869                         I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
1870                         /* Flush the plane changes */
1871                         I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
1872                 }
1873
1874                 if (!HAS_eDP) {
1875                         /* For PCH output, training FDI link */
1876                         if (IS_GEN6(dev))
1877                                 gen6_fdi_link_train(crtc);
1878                         else
1879                                 ironlake_fdi_link_train(crtc);
1880
1881                         /* enable PCH DPLL */
1882                         temp = I915_READ(pch_dpll_reg);
1883                         if ((temp & DPLL_VCO_ENABLE) == 0) {
1884                                 I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
1885                                 I915_READ(pch_dpll_reg);
1886                         }
1887                         udelay(200);
1888
1889                         if (HAS_PCH_CPT(dev)) {
1890                                 /* Be sure PCH DPLL SEL is set */
1891                                 temp = I915_READ(PCH_DPLL_SEL);
1892                                 if (trans_dpll_sel == 0 &&
1893                                                 (temp & TRANSA_DPLL_ENABLE) == 0)
1894                                         temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
1895                                 else if (trans_dpll_sel == 1 &&
1896                                                 (temp & TRANSB_DPLL_ENABLE) == 0)
1897                                         temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
1898                                 I915_WRITE(PCH_DPLL_SEL, temp);
1899                                 I915_READ(PCH_DPLL_SEL);
1900                         }
1901
1902                         /* set transcoder timing */
1903                         I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
1904                         I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
1905                         I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
1906
1907                         I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
1908                         I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
1909                         I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
1910
1911                         /* enable normal train */
1912                         temp = I915_READ(fdi_tx_reg);
1913                         temp &= ~FDI_LINK_TRAIN_NONE;
1914                         I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
1915                                         FDI_TX_ENHANCE_FRAME_ENABLE);
1916                         I915_READ(fdi_tx_reg);
1917
1918                         temp = I915_READ(fdi_rx_reg);
1919                         if (HAS_PCH_CPT(dev)) {
1920                                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
1921                                 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
1922                         } else {
1923                                 temp &= ~FDI_LINK_TRAIN_NONE;
1924                                 temp |= FDI_LINK_TRAIN_NONE;
1925                         }
1926                         I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
1927                         I915_READ(fdi_rx_reg);
1928
1929                         /* wait one idle pattern time */
1930                         udelay(100);
1931
1932                         /* For PCH DP, enable TRANS_DP_CTL */
1933                         if (HAS_PCH_CPT(dev) &&
1934                             intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
1935                                 int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B;
1936                                 int reg;
1937
1938                                 reg = I915_READ(trans_dp_ctl);
1939                                 reg &= ~TRANS_DP_PORT_SEL_MASK;
1940                                 reg = TRANS_DP_OUTPUT_ENABLE |
1941                                       TRANS_DP_ENH_FRAMING |
1942                                       TRANS_DP_VSYNC_ACTIVE_HIGH |
1943                                       TRANS_DP_HSYNC_ACTIVE_HIGH;
1944
1945                                 switch (intel_trans_dp_port_sel(crtc)) {
1946                                 case PCH_DP_B:
1947                                         reg |= TRANS_DP_PORT_SEL_B;
1948                                         break;
1949                                 case PCH_DP_C:
1950                                         reg |= TRANS_DP_PORT_SEL_C;
1951                                         break;
1952                                 case PCH_DP_D:
1953                                         reg |= TRANS_DP_PORT_SEL_D;
1954                                         break;
1955                                 default:
1956                                         DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
1957                                         reg |= TRANS_DP_PORT_SEL_B;
1958                                         break;
1959                                 }
1960
1961                                 I915_WRITE(trans_dp_ctl, reg);
1962                                 POSTING_READ(trans_dp_ctl);
1963                         }
1964
1965                         /* enable PCH transcoder */
1966                         temp = I915_READ(transconf_reg);
1967                         /*
1968                          * make the BPC in transcoder be consistent with
1969                          * that in pipeconf reg.
1970                          */
1971                         temp &= ~PIPE_BPC_MASK;
1972                         temp |= pipe_bpc;
1973                         I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
1974                         I915_READ(transconf_reg);
1975
1976                         while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
1977                                 ;
1978
1979                 }
1980
1981                 intel_crtc_load_lut(crtc);
1982
1983         break;
1984         case DRM_MODE_DPMS_OFF:
1985                 DRM_DEBUG_KMS("crtc %d dpms off\n", pipe);
1986
1987                 drm_vblank_off(dev, pipe);
1988                 /* Disable display plane */
1989                 temp = I915_READ(dspcntr_reg);
1990                 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
1991                         I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
1992                         /* Flush the plane changes */
1993                         I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
1994                         I915_READ(dspbase_reg);
1995                 }
1996
1997                 i915_disable_vga(dev);
1998
1999                 /* disable cpu pipe, disable after all planes disabled */
2000                 temp = I915_READ(pipeconf_reg);
2001                 if ((temp & PIPEACONF_ENABLE) != 0) {
2002                         I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
2003                         I915_READ(pipeconf_reg);
2004                         n = 0;
2005                         /* wait for cpu pipe off, pipe state */
2006                         while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0) {
2007                                 n++;
2008                                 if (n < 60) {
2009                                         udelay(500);
2010                                         continue;
2011                                 } else {
2012                                         DRM_DEBUG_KMS("pipe %d off delay\n",
2013                                                                 pipe);
2014                                         break;
2015                                 }
2016                         }
2017                 } else
2018                         DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
2019
2020                 udelay(100);
2021
2022                 /* Disable PF */
2023                 temp = I915_READ(pf_ctl_reg);
2024                 if ((temp & PF_ENABLE) != 0) {
2025                         I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
2026                         I915_READ(pf_ctl_reg);
2027                 }
2028                 I915_WRITE(pf_win_size, 0);
2029                 POSTING_READ(pf_win_size);
2030
2031
2032                 /* disable CPU FDI tx and PCH FDI rx */
2033                 temp = I915_READ(fdi_tx_reg);
2034                 I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE);
2035                 I915_READ(fdi_tx_reg);
2036
2037                 temp = I915_READ(fdi_rx_reg);
2038                 /* BPC in FDI rx is consistent with that in pipeconf */
2039                 temp &= ~(0x07 << 16);
2040                 temp |= (pipe_bpc << 11);
2041                 I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
2042                 I915_READ(fdi_rx_reg);
2043
2044                 udelay(100);
2045
2046                 /* still set train pattern 1 */
2047                 temp = I915_READ(fdi_tx_reg);
2048                 temp &= ~FDI_LINK_TRAIN_NONE;
2049                 temp |= FDI_LINK_TRAIN_PATTERN_1;
2050                 I915_WRITE(fdi_tx_reg, temp);
2051                 POSTING_READ(fdi_tx_reg);
2052
2053                 temp = I915_READ(fdi_rx_reg);
2054                 if (HAS_PCH_CPT(dev)) {
2055                         temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2056                         temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2057                 } else {
2058                         temp &= ~FDI_LINK_TRAIN_NONE;
2059                         temp |= FDI_LINK_TRAIN_PATTERN_1;
2060                 }
2061                 I915_WRITE(fdi_rx_reg, temp);
2062                 POSTING_READ(fdi_rx_reg);
2063
2064                 udelay(100);
2065
2066                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
2067                         temp = I915_READ(PCH_LVDS);
2068                         I915_WRITE(PCH_LVDS, temp & ~LVDS_PORT_EN);
2069                         I915_READ(PCH_LVDS);
2070                         udelay(100);
2071                 }
2072
2073                 /* disable PCH transcoder */
2074                 temp = I915_READ(transconf_reg);
2075                 if ((temp & TRANS_ENABLE) != 0) {
2076                         I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
2077                         I915_READ(transconf_reg);
2078                         n = 0;
2079                         /* wait for PCH transcoder off, transcoder state */
2080                         while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0) {
2081                                 n++;
2082                                 if (n < 60) {
2083                                         udelay(500);
2084                                         continue;
2085                                 } else {
2086                                         DRM_DEBUG_KMS("transcoder %d off "
2087                                                         "delay\n", pipe);
2088                                         break;
2089                                 }
2090                         }
2091                 }
2092
2093                 temp = I915_READ(transconf_reg);
2094                 /* BPC in transcoder is consistent with that in pipeconf */
2095                 temp &= ~PIPE_BPC_MASK;
2096                 temp |= pipe_bpc;
2097                 I915_WRITE(transconf_reg, temp);
2098                 I915_READ(transconf_reg);
2099                 udelay(100);
2100
2101                 if (HAS_PCH_CPT(dev)) {
2102                         /* disable TRANS_DP_CTL */
2103                         int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B;
2104                         int reg;
2105
2106                         reg = I915_READ(trans_dp_ctl);
2107                         reg &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
2108                         I915_WRITE(trans_dp_ctl, reg);
2109                         POSTING_READ(trans_dp_ctl);
2110
2111                         /* disable DPLL_SEL */
2112                         temp = I915_READ(PCH_DPLL_SEL);
2113                         if (trans_dpll_sel == 0)
2114                                 temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
2115                         else
2116                                 temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
2117                         I915_WRITE(PCH_DPLL_SEL, temp);
2118                         I915_READ(PCH_DPLL_SEL);
2119
2120                 }
2121
2122                 /* disable PCH DPLL */
2123                 temp = I915_READ(pch_dpll_reg);
2124                 I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE);
2125                 I915_READ(pch_dpll_reg);
2126
2127                 if (HAS_eDP) {
2128                         ironlake_disable_pll_edp(crtc);
2129                 }
2130
2131                 /* Switch from PCDclk to Rawclk */
2132                 temp = I915_READ(fdi_rx_reg);
2133                 temp &= ~FDI_SEL_PCDCLK;
2134                 I915_WRITE(fdi_rx_reg, temp);
2135                 I915_READ(fdi_rx_reg);
2136
2137                 /* Disable CPU FDI TX PLL */
2138                 temp = I915_READ(fdi_tx_reg);
2139                 I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE);
2140                 I915_READ(fdi_tx_reg);
2141                 udelay(100);
2142
2143                 temp = I915_READ(fdi_rx_reg);
2144                 temp &= ~FDI_RX_PLL_ENABLE;
2145                 I915_WRITE(fdi_rx_reg, temp);
2146                 I915_READ(fdi_rx_reg);
2147
2148                 /* Wait for the clocks to turn off. */
2149                 udelay(100);
2150                 break;
2151         }
2152 }
2153
2154 static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
2155 {
2156         struct intel_overlay *overlay;
2157         int ret;
2158
2159         if (!enable && intel_crtc->overlay) {
2160                 overlay = intel_crtc->overlay;
2161                 mutex_lock(&overlay->dev->struct_mutex);
2162                 for (;;) {
2163                         ret = intel_overlay_switch_off(overlay);
2164                         if (ret == 0)
2165                                 break;
2166
2167                         ret = intel_overlay_recover_from_interrupt(overlay, 0);
2168                         if (ret != 0) {
2169                                 /* overlay doesn't react anymore. Usually
2170                                  * results in a black screen and an unkillable
2171                                  * X server. */
2172                                 BUG();
2173                                 overlay->hw_wedged = HW_WEDGED;
2174                                 break;
2175                         }
2176                 }
2177                 mutex_unlock(&overlay->dev->struct_mutex);
2178         }
2179         /* Let userspace switch the overlay on again. In most cases userspace
2180          * has to recompute where to put it anyway. */
2181
2182         return;
2183 }
2184
2185 static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
2186 {
2187         struct drm_device *dev = crtc->dev;
2188         struct drm_i915_private *dev_priv = dev->dev_private;
2189         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2190         int pipe = intel_crtc->pipe;
2191         int plane = intel_crtc->plane;
2192         int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
2193         int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
2194         int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR;
2195         int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
2196         u32 temp;
2197
2198         /* XXX: When our outputs are all unaware of DPMS modes other than off
2199          * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
2200          */
2201         switch (mode) {
2202         case DRM_MODE_DPMS_ON:
2203         case DRM_MODE_DPMS_STANDBY:
2204         case DRM_MODE_DPMS_SUSPEND:
2205                 intel_update_watermarks(dev);
2206
2207                 /* Enable the DPLL */
2208                 temp = I915_READ(dpll_reg);
2209                 if ((temp & DPLL_VCO_ENABLE) == 0) {
2210                         I915_WRITE(dpll_reg, temp);
2211                         I915_READ(dpll_reg);
2212                         /* Wait for the clocks to stabilize. */
2213                         udelay(150);
2214                         I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
2215                         I915_READ(dpll_reg);
2216                         /* Wait for the clocks to stabilize. */
2217                         udelay(150);
2218                         I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
2219                         I915_READ(dpll_reg);
2220                         /* Wait for the clocks to stabilize. */
2221                         udelay(150);
2222                 }
2223
2224                 /* Enable the pipe */
2225                 temp = I915_READ(pipeconf_reg);
2226                 if ((temp & PIPEACONF_ENABLE) == 0)
2227                         I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
2228
2229                 /* Enable the plane */
2230                 temp = I915_READ(dspcntr_reg);
2231                 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
2232                         I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
2233                         /* Flush the plane changes */
2234                         I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
2235                 }
2236
2237                 intel_crtc_load_lut(crtc);
2238
2239                 if ((IS_I965G(dev) || plane == 0))
2240                         intel_update_fbc(crtc, &crtc->mode);
2241
2242                 /* Give the overlay scaler a chance to enable if it's on this pipe */
2243                 intel_crtc_dpms_overlay(intel_crtc, true);
2244         break;
2245         case DRM_MODE_DPMS_OFF:
2246                 intel_update_watermarks(dev);
2247
2248                 /* Give the overlay scaler a chance to disable if it's on this pipe */
2249                 intel_crtc_dpms_overlay(intel_crtc, false);
2250                 drm_vblank_off(dev, pipe);
2251
2252                 if (dev_priv->cfb_plane == plane &&
2253                     dev_priv->display.disable_fbc)
2254                         dev_priv->display.disable_fbc(dev);
2255
2256                 /* Disable the VGA plane that we never use */
2257                 i915_disable_vga(dev);
2258
2259                 /* Disable display plane */
2260                 temp = I915_READ(dspcntr_reg);
2261                 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
2262                         I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
2263                         /* Flush the plane changes */
2264                         I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
2265                         I915_READ(dspbase_reg);
2266                 }
2267
2268                 if (!IS_I9XX(dev)) {
2269                         /* Wait for vblank for the disable to take effect */
2270                         intel_wait_for_vblank(dev);
2271                 }
2272
2273                 /* Don't disable pipe A or pipe A PLLs if needed */
2274                 if (pipeconf_reg == PIPEACONF &&
2275                     (dev_priv->quirks & QUIRK_PIPEA_FORCE))
2276                         goto skip_pipe_off;
2277
2278                 /* Next, disable display pipes */
2279                 temp = I915_READ(pipeconf_reg);
2280                 if ((temp & PIPEACONF_ENABLE) != 0) {
2281                         I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
2282                         I915_READ(pipeconf_reg);
2283                 }
2284
2285                 /* Wait for vblank for the disable to take effect. */
2286                 intel_wait_for_vblank(dev);
2287
2288                 temp = I915_READ(dpll_reg);
2289                 if ((temp & DPLL_VCO_ENABLE) != 0) {
2290                         I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
2291                         I915_READ(dpll_reg);
2292                 }
2293         skip_pipe_off:
2294                 /* Wait for the clocks to turn off. */
2295                 udelay(150);
2296                 break;
2297         }
2298 }
2299
2300 /**
2301  * Sets the power management mode of the pipe and plane.
2302  *
2303  * This code should probably grow support for turning the cursor off and back
2304  * on appropriately at the same time as we're turning the pipe off/on.
2305  */
2306 static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
2307 {
2308         struct drm_device *dev = crtc->dev;
2309         struct drm_i915_private *dev_priv = dev->dev_private;
2310         struct drm_i915_master_private *master_priv;
2311         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2312         int pipe = intel_crtc->pipe;
2313         bool enabled;
2314
2315         dev_priv->display.dpms(crtc, mode);
2316
2317         intel_crtc->dpms_mode = mode;
2318
2319         if (!dev->primary->master)
2320                 return;
2321
2322         master_priv = dev->primary->master->driver_priv;
2323         if (!master_priv->sarea_priv)
2324                 return;
2325
2326         enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
2327
2328         switch (pipe) {
2329         case 0:
2330                 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
2331                 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
2332                 break;
2333         case 1:
2334                 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
2335                 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
2336                 break;
2337         default:
2338                 DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
2339                 break;
2340         }
2341 }
2342
2343 static void intel_crtc_prepare (struct drm_crtc *crtc)
2344 {
2345         struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
2346         crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
2347 }
2348
2349 static void intel_crtc_commit (struct drm_crtc *crtc)
2350 {
2351         struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
2352         crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
2353 }
2354
2355 void intel_encoder_prepare (struct drm_encoder *encoder)
2356 {
2357         struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
2358         /* lvds has its own version of prepare see intel_lvds_prepare */
2359         encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
2360 }
2361
2362 void intel_encoder_commit (struct drm_encoder *encoder)
2363 {
2364         struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
2365         /* lvds has its own version of commit see intel_lvds_commit */
2366         encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
2367 }
2368
2369 static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
2370                                   struct drm_display_mode *mode,
2371                                   struct drm_display_mode *adjusted_mode)
2372 {
2373         struct drm_device *dev = crtc->dev;
2374         if (HAS_PCH_SPLIT(dev)) {
2375                 /* FDI link clock is fixed at 2.7G */
2376                 if (mode->clock * 3 > 27000 * 4)
2377                         return MODE_CLOCK_HIGH;
2378         }
2379         return true;
2380 }
2381
2382 static int i945_get_display_clock_speed(struct drm_device *dev)
2383 {
2384         return 400000;
2385 }
2386
2387 static int i915_get_display_clock_speed(struct drm_device *dev)
2388 {
2389         return 333000;
2390 }
2391
2392 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
2393 {
2394         return 200000;
2395 }
2396
2397 static int i915gm_get_display_clock_speed(struct drm_device *dev)
2398 {
2399         u16 gcfgc = 0;
2400
2401         pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
2402
2403         if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
2404                 return 133000;
2405         else {
2406                 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
2407                 case GC_DISPLAY_CLOCK_333_MHZ:
2408                         return 333000;
2409                 default:
2410                 case GC_DISPLAY_CLOCK_190_200_MHZ:
2411                         return 190000;
2412                 }
2413         }
2414 }
2415
2416 static int i865_get_display_clock_speed(struct drm_device *dev)
2417 {
2418         return 266000;
2419 }
2420
2421 static int i855_get_display_clock_speed(struct drm_device *dev)
2422 {
2423         u16 hpllcc = 0;
2424         /* Assume that the hardware is in the high speed state.  This
2425          * should be the default.
2426          */
2427         switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
2428         case GC_CLOCK_133_200:
2429         case GC_CLOCK_100_200:
2430                 return 200000;
2431         case GC_CLOCK_166_250:
2432                 return 250000;
2433         case GC_CLOCK_100_133:
2434                 return 133000;
2435         }
2436
2437         /* Shouldn't happen */
2438         return 0;
2439 }
2440
2441 static int i830_get_display_clock_speed(struct drm_device *dev)
2442 {
2443         return 133000;
2444 }
2445
2446 /**
2447  * Return the pipe currently connected to the panel fitter,
2448  * or -1 if the panel fitter is not present or not in use
2449  */
2450 int intel_panel_fitter_pipe (struct drm_device *dev)
2451 {
2452         struct drm_i915_private *dev_priv = dev->dev_private;
2453         u32  pfit_control;
2454
2455         /* i830 doesn't have a panel fitter */
2456         if (IS_I830(dev))
2457                 return -1;
2458
2459         pfit_control = I915_READ(PFIT_CONTROL);
2460
2461         /* See if the panel fitter is in use */
2462         if ((pfit_control & PFIT_ENABLE) == 0)
2463                 return -1;
2464
2465         /* 965 can place panel fitter on either pipe */
2466         if (IS_I965G(dev))
2467                 return (pfit_control >> 29) & 0x3;
2468
2469         /* older chips can only use pipe 1 */
2470         return 1;
2471 }
2472
2473 struct fdi_m_n {
2474         u32        tu;
2475         u32        gmch_m;
2476         u32        gmch_n;
2477         u32        link_m;
2478         u32        link_n;
2479 };
2480
2481 static void
2482 fdi_reduce_ratio(u32 *num, u32 *den)
2483 {
2484         while (*num > 0xffffff || *den > 0xffffff) {
2485                 *num >>= 1;
2486                 *den >>= 1;
2487         }
2488 }
2489
2490 #define DATA_N 0x800000
2491 #define LINK_N 0x80000
2492
2493 static void
2494 ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
2495                      int link_clock, struct fdi_m_n *m_n)
2496 {
2497         u64 temp;
2498
2499         m_n->tu = 64; /* default size */
2500
2501         temp = (u64) DATA_N * pixel_clock;
2502         temp = div_u64(temp, link_clock);
2503         m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes);
2504         m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */
2505         m_n->gmch_n = DATA_N;
2506         fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
2507
2508         temp = (u64) LINK_N * pixel_clock;
2509         m_n->link_m = div_u64(temp, link_clock);
2510         m_n->link_n = LINK_N;
2511         fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
2512 }
2513
2514
2515 struct intel_watermark_params {
2516         unsigned long fifo_size;
2517         unsigned long max_wm;
2518         unsigned long default_wm;
2519         unsigned long guard_size;
2520         unsigned long cacheline_size;
2521 };
2522
2523 /* Pineview has different values for various configs */
2524 static struct intel_watermark_params pineview_display_wm = {
2525         PINEVIEW_DISPLAY_FIFO,
2526         PINEVIEW_MAX_WM,
2527         PINEVIEW_DFT_WM,
2528         PINEVIEW_GUARD_WM,
2529         PINEVIEW_FIFO_LINE_SIZE
2530 };
2531 static struct intel_watermark_params pineview_display_hplloff_wm = {
2532         PINEVIEW_DISPLAY_FIFO,
2533         PINEVIEW_MAX_WM,
2534         PINEVIEW_DFT_HPLLOFF_WM,
2535         PINEVIEW_GUARD_WM,
2536         PINEVIEW_FIFO_LINE_SIZE
2537 };
2538 static struct intel_watermark_params pineview_cursor_wm = {
2539         PINEVIEW_CURSOR_FIFO,
2540         PINEVIEW_CURSOR_MAX_WM,
2541         PINEVIEW_CURSOR_DFT_WM,
2542         PINEVIEW_CURSOR_GUARD_WM,
2543         PINEVIEW_FIFO_LINE_SIZE,
2544 };
2545 static struct intel_watermark_params pineview_cursor_hplloff_wm = {
2546         PINEVIEW_CURSOR_FIFO,
2547         PINEVIEW_CURSOR_MAX_WM,
2548         PINEVIEW_CURSOR_DFT_WM,
2549         PINEVIEW_CURSOR_GUARD_WM,
2550         PINEVIEW_FIFO_LINE_SIZE
2551 };
2552 static struct intel_watermark_params g4x_wm_info = {
2553         G4X_FIFO_SIZE,
2554         G4X_MAX_WM,
2555         G4X_MAX_WM,
2556         2,
2557         G4X_FIFO_LINE_SIZE,
2558 };
2559 static struct intel_watermark_params i945_wm_info = {
2560         I945_FIFO_SIZE,
2561         I915_MAX_WM,
2562         1,
2563         2,
2564         I915_FIFO_LINE_SIZE
2565 };
2566 static struct intel_watermark_params i915_wm_info = {
2567         I915_FIFO_SIZE,
2568         I915_MAX_WM,
2569         1,
2570         2,
2571         I915_FIFO_LINE_SIZE
2572 };
2573 static struct intel_watermark_params i855_wm_info = {
2574         I855GM_FIFO_SIZE,
2575         I915_MAX_WM,
2576         1,
2577         2,
2578         I830_FIFO_LINE_SIZE
2579 };
2580 static struct intel_watermark_params i830_wm_info = {
2581         I830_FIFO_SIZE,
2582         I915_MAX_WM,
2583         1,
2584         2,
2585         I830_FIFO_LINE_SIZE
2586 };
2587
2588 static struct intel_watermark_params ironlake_display_wm_info = {
2589         ILK_DISPLAY_FIFO,
2590         ILK_DISPLAY_MAXWM,
2591         ILK_DISPLAY_DFTWM,
2592         2,
2593         ILK_FIFO_LINE_SIZE
2594 };
2595
2596 static struct intel_watermark_params ironlake_display_srwm_info = {
2597         ILK_DISPLAY_SR_FIFO,
2598         ILK_DISPLAY_MAX_SRWM,
2599         ILK_DISPLAY_DFT_SRWM,
2600         2,
2601         ILK_FIFO_LINE_SIZE
2602 };
2603
2604 static struct intel_watermark_params ironlake_cursor_srwm_info = {
2605         ILK_CURSOR_SR_FIFO,
2606         ILK_CURSOR_MAX_SRWM,
2607         ILK_CURSOR_DFT_SRWM,
2608         2,
2609         ILK_FIFO_LINE_SIZE
2610 };
2611
2612 /**
2613  * intel_calculate_wm - calculate watermark level
2614  * @clock_in_khz: pixel clock
2615  * @wm: chip FIFO params
2616  * @pixel_size: display pixel size
2617  * @latency_ns: memory latency for the platform
2618  *
2619  * Calculate the watermark level (the level at which the display plane will
2620  * start fetching from memory again).  Each chip has a different display
2621  * FIFO size and allocation, so the caller needs to figure that out and pass
2622  * in the correct intel_watermark_params structure.
2623  *
2624  * As the pixel clock runs, the FIFO will be drained at a rate that depends
2625  * on the pixel size.  When it reaches the watermark level, it'll start
2626  * fetching FIFO line sized based chunks from memory until the FIFO fills
2627  * past the watermark point.  If the FIFO drains completely, a FIFO underrun
2628  * will occur, and a display engine hang could result.
2629  */
2630 static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
2631                                         struct intel_watermark_params *wm,
2632                                         int pixel_size,
2633                                         unsigned long latency_ns)
2634 {
2635         long entries_required, wm_size;
2636
2637         /*
2638          * Note: we need to make sure we don't overflow for various clock &
2639          * latency values.
2640          * clocks go from a few thousand to several hundred thousand.
2641          * latency is usually a few thousand
2642          */
2643         entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) /
2644                 1000;
2645         entries_required /= wm->cacheline_size;
2646
2647         DRM_DEBUG_KMS("FIFO entries required for mode: %d\n", entries_required);
2648
2649         wm_size = wm->fifo_size - (entries_required + wm->guard_size);
2650
2651         DRM_DEBUG_KMS("FIFO watermark level: %d\n", wm_size);
2652
2653         /* Don't promote wm_size to unsigned... */
2654         if (wm_size > (long)wm->max_wm)
2655                 wm_size = wm->max_wm;
2656         if (wm_size <= 0)
2657                 wm_size = wm->default_wm;
2658         return wm_size;
2659 }
2660
2661 struct cxsr_latency {
2662         int is_desktop;
2663         int is_ddr3;
2664         unsigned long fsb_freq;
2665         unsigned long mem_freq;
2666         unsigned long display_sr;
2667         unsigned long display_hpll_disable;
2668         unsigned long cursor_sr;
2669         unsigned long cursor_hpll_disable;
2670 };
2671
2672 static struct cxsr_latency cxsr_latency_table[] = {
2673         {1, 0, 800, 400, 3382, 33382, 3983, 33983},    /* DDR2-400 SC */
2674         {1, 0, 800, 667, 3354, 33354, 3807, 33807},    /* DDR2-667 SC */
2675         {1, 0, 800, 800, 3347, 33347, 3763, 33763},    /* DDR2-800 SC */
2676         {1, 1, 800, 667, 6420, 36420, 6873, 36873},    /* DDR3-667 SC */
2677         {1, 1, 800, 800, 5902, 35902, 6318, 36318},    /* DDR3-800 SC */
2678
2679         {1, 0, 667, 400, 3400, 33400, 4021, 34021},    /* DDR2-400 SC */
2680         {1, 0, 667, 667, 3372, 33372, 3845, 33845},    /* DDR2-667 SC */
2681         {1, 0, 667, 800, 3386, 33386, 3822, 33822},    /* DDR2-800 SC */
2682         {1, 1, 667, 667, 6438, 36438, 6911, 36911},    /* DDR3-667 SC */
2683         {1, 1, 667, 800, 5941, 35941, 6377, 36377},    /* DDR3-800 SC */
2684
2685         {1, 0, 400, 400, 3472, 33472, 4173, 34173},    /* DDR2-400 SC */
2686         {1, 0, 400, 667, 3443, 33443, 3996, 33996},    /* DDR2-667 SC */
2687         {1, 0, 400, 800, 3430, 33430, 3946, 33946},    /* DDR2-800 SC */
2688         {1, 1, 400, 667, 6509, 36509, 7062, 37062},    /* DDR3-667 SC */
2689         {1, 1, 400, 800, 5985, 35985, 6501, 36501},    /* DDR3-800 SC */
2690
2691         {0, 0, 800, 400, 3438, 33438, 4065, 34065},    /* DDR2-400 SC */
2692         {0, 0, 800, 667, 3410, 33410, 3889, 33889},    /* DDR2-667 SC */
2693         {0, 0, 800, 800, 3403, 33403, 3845, 33845},    /* DDR2-800 SC */
2694         {0, 1, 800, 667, 6476, 36476, 6955, 36955},    /* DDR3-667 SC */
2695         {0, 1, 800, 800, 5958, 35958, 6400, 36400},    /* DDR3-800 SC */
2696
2697         {0, 0, 667, 400, 3456, 33456, 4103, 34106},    /* DDR2-400 SC */
2698         {0, 0, 667, 667, 3428, 33428, 3927, 33927},    /* DDR2-667 SC */
2699         {0, 0, 667, 800, 3443, 33443, 3905, 33905},    /* DDR2-800 SC */
2700         {0, 1, 667, 667, 6494, 36494, 6993, 36993},    /* DDR3-667 SC */
2701         {0, 1, 667, 800, 5998, 35998, 6460, 36460},    /* DDR3-800 SC */
2702
2703         {0, 0, 400, 400, 3528, 33528, 4255, 34255},    /* DDR2-400 SC */
2704         {0, 0, 400, 667, 3500, 33500, 4079, 34079},    /* DDR2-667 SC */
2705         {0, 0, 400, 800, 3487, 33487, 4029, 34029},    /* DDR2-800 SC */
2706         {0, 1, 400, 667, 6566, 36566, 7145, 37145},    /* DDR3-667 SC */
2707         {0, 1, 400, 800, 6042, 36042, 6584, 36584},    /* DDR3-800 SC */
2708 };
2709
2710 static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int is_ddr3,
2711                                                    int fsb, int mem)
2712 {
2713         int i;
2714         struct cxsr_latency *latency;
2715
2716         if (fsb == 0 || mem == 0)
2717                 return NULL;
2718
2719         for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
2720                 latency = &cxsr_latency_table[i];
2721                 if (is_desktop == latency->is_desktop &&
2722                     is_ddr3 == latency->is_ddr3 &&
2723                     fsb == latency->fsb_freq && mem == latency->mem_freq)
2724                         return latency;
2725         }
2726
2727         DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
2728
2729         return NULL;
2730 }
2731
2732 static void pineview_disable_cxsr(struct drm_device *dev)
2733 {
2734         struct drm_i915_private *dev_priv = dev->dev_private;
2735         u32 reg;
2736
2737         /* deactivate cxsr */
2738         reg = I915_READ(DSPFW3);
2739         reg &= ~(PINEVIEW_SELF_REFRESH_EN);
2740         I915_WRITE(DSPFW3, reg);
2741         DRM_INFO("Big FIFO is disabled\n");
2742 }
2743
2744 /*
2745  * Latency for FIFO fetches is dependent on several factors:
2746  *   - memory configuration (speed, channels)
2747  *   - chipset
2748  *   - current MCH state
2749  * It can be fairly high in some situations, so here we assume a fairly
2750  * pessimal value.  It's a tradeoff between extra memory fetches (if we
2751  * set this value too high, the FIFO will fetch frequently to stay full)
2752  * and power consumption (set it too low to save power and we might see
2753  * FIFO underruns and display "flicker").
2754  *
2755  * A value of 5us seems to be a good balance; safe for very low end
2756  * platforms but not overly aggressive on lower latency configs.
2757  */
2758 static const int latency_ns = 5000;
2759
2760 static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
2761 {
2762         struct drm_i915_private *dev_priv = dev->dev_private;
2763         uint32_t dsparb = I915_READ(DSPARB);
2764         int size;
2765
2766         if (plane == 0)
2767                 size = dsparb & 0x7f;
2768         else
2769                 size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) -
2770                         (dsparb & 0x7f);
2771
2772         DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
2773                         plane ? "B" : "A", size);
2774
2775         return size;
2776 }
2777
2778 static int i85x_get_fifo_size(struct drm_device *dev, int plane)
2779 {
2780         struct drm_i915_private *dev_priv = dev->dev_private;
2781         uint32_t dsparb = I915_READ(DSPARB);
2782         int size;
2783
2784         if (plane == 0)
2785                 size = dsparb & 0x1ff;
2786         else
2787                 size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) -
2788                         (dsparb & 0x1ff);
2789         size >>= 1; /* Convert to cachelines */
2790
2791         DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
2792                         plane ? "B" : "A", size);
2793
2794         return size;
2795 }
2796
2797 static int i845_get_fifo_size(struct drm_device *dev, int plane)
2798 {
2799         struct drm_i915_private *dev_priv = dev->dev_private;
2800         uint32_t dsparb = I915_READ(DSPARB);
2801         int size;
2802
2803         size = dsparb & 0x7f;
2804         size >>= 2; /* Convert to cachelines */
2805
2806         DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
2807                         plane ? "B" : "A",
2808                   size);
2809
2810         return size;
2811 }
2812
2813 static int i830_get_fifo_size(struct drm_device *dev, int plane)
2814 {
2815         struct drm_i915_private *dev_priv = dev->dev_private;
2816         uint32_t dsparb = I915_READ(DSPARB);
2817         int size;
2818
2819         size = dsparb & 0x7f;
2820         size >>= 1; /* Convert to cachelines */
2821
2822         DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
2823                         plane ? "B" : "A", size);
2824
2825         return size;
2826 }
2827
2828 static void pineview_update_wm(struct drm_device *dev,  int planea_clock,
2829                           int planeb_clock, int sr_hdisplay, int pixel_size)
2830 {
2831         struct drm_i915_private *dev_priv = dev->dev_private;
2832         u32 reg;
2833         unsigned long wm;
2834         struct cxsr_latency *latency;
2835         int sr_clock;
2836
2837         latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3,
2838                                          dev_priv->fsb_freq, dev_priv->mem_freq);
2839         if (!latency) {
2840                 DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
2841                 pineview_disable_cxsr(dev);
2842                 return;
2843         }
2844
2845         if (!planea_clock || !planeb_clock) {
2846                 sr_clock = planea_clock ? planea_clock : planeb_clock;
2847
2848                 /* Display SR */
2849                 wm = intel_calculate_wm(sr_clock, &pineview_display_wm,
2850                                         pixel_size, latency->display_sr);
2851                 reg = I915_READ(DSPFW1);
2852                 reg &= ~DSPFW_SR_MASK;
2853                 reg |= wm << DSPFW_SR_SHIFT;
2854                 I915_WRITE(DSPFW1, reg);
2855                 DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg);
2856
2857                 /* cursor SR */
2858                 wm = intel_calculate_wm(sr_clock, &pineview_cursor_wm,
2859                                         pixel_size, latency->cursor_sr);
2860                 reg = I915_READ(DSPFW3);
2861                 reg &= ~DSPFW_CURSOR_SR_MASK;
2862                 reg |= (wm & 0x3f) << DSPFW_CURSOR_SR_SHIFT;
2863                 I915_WRITE(DSPFW3, reg);
2864
2865                 /* Display HPLL off SR */
2866                 wm = intel_calculate_wm(sr_clock, &pineview_display_hplloff_wm,
2867                                         pixel_size, latency->display_hpll_disable);
2868                 reg = I915_READ(DSPFW3);
2869                 reg &= ~DSPFW_HPLL_SR_MASK;
2870                 reg |= wm & DSPFW_HPLL_SR_MASK;
2871                 I915_WRITE(DSPFW3, reg);
2872
2873                 /* cursor HPLL off SR */
2874                 wm = intel_calculate_wm(sr_clock, &pineview_cursor_hplloff_wm,
2875                                         pixel_size, latency->cursor_hpll_disable);
2876                 reg = I915_READ(DSPFW3);
2877                 reg &= ~DSPFW_HPLL_CURSOR_MASK;
2878                 reg |= (wm & 0x3f) << DSPFW_HPLL_CURSOR_SHIFT;
2879                 I915_WRITE(DSPFW3, reg);
2880                 DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg);
2881
2882                 /* activate cxsr */
2883                 reg = I915_READ(DSPFW3);
2884                 reg |= PINEVIEW_SELF_REFRESH_EN;
2885                 I915_WRITE(DSPFW3, reg);
2886                 DRM_DEBUG_KMS("Self-refresh is enabled\n");
2887         } else {
2888                 pineview_disable_cxsr(dev);
2889                 DRM_DEBUG_KMS("Self-refresh is disabled\n");
2890         }
2891 }
2892
2893 static void g4x_update_wm(struct drm_device *dev,  int planea_clock,
2894                           int planeb_clock, int sr_hdisplay, int pixel_size)
2895 {
2896         struct drm_i915_private *dev_priv = dev->dev_private;
2897         int total_size, cacheline_size;
2898         int planea_wm, planeb_wm, cursora_wm, cursorb_wm, cursor_sr;
2899         struct intel_watermark_params planea_params, planeb_params;
2900         unsigned long line_time_us;
2901         int sr_clock, sr_entries = 0, entries_required;
2902
2903         /* Create copies of the base settings for each pipe */
2904         planea_params = planeb_params = g4x_wm_info;
2905
2906         /* Grab a couple of global values before we overwrite them */
2907         total_size = planea_params.fifo_size;
2908         cacheline_size = planea_params.cacheline_size;
2909
2910         /*
2911          * Note: we need to make sure we don't overflow for various clock &
2912          * latency values.
2913          * clocks go from a few thousand to several hundred thousand.
2914          * latency is usually a few thousand
2915          */
2916         entries_required = ((planea_clock / 1000) * pixel_size * latency_ns) /
2917                 1000;
2918         entries_required /= G4X_FIFO_LINE_SIZE;
2919         planea_wm = entries_required + planea_params.guard_size;
2920
2921         entries_required = ((planeb_clock / 1000) * pixel_size * latency_ns) /
2922                 1000;
2923         entries_required /= G4X_FIFO_LINE_SIZE;
2924         planeb_wm = entries_required + planeb_params.guard_size;
2925
2926         cursora_wm = cursorb_wm = 16;
2927         cursor_sr = 32;
2928
2929         DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
2930
2931         /* Calc sr entries for one plane configs */
2932         if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
2933                 /* self-refresh has much higher latency */
2934                 static const int sr_latency_ns = 12000;
2935
2936                 sr_clock = planea_clock ? planea_clock : planeb_clock;
2937                 line_time_us = ((sr_hdisplay * 1000) / sr_clock);
2938
2939                 /* Use ns/us then divide to preserve precision */
2940                 sr_entries = (((sr_latency_ns / line_time_us) + 1) *
2941                               pixel_size * sr_hdisplay) / 1000;
2942                 sr_entries = roundup(sr_entries / cacheline_size, 1);
2943                 DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
2944                 I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
2945         } else {
2946                 /* Turn off self refresh if both pipes are enabled */
2947                 I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
2948                                         & ~FW_BLC_SELF_EN);
2949         }
2950
2951         DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n",
2952                   planea_wm, planeb_wm, sr_entries);
2953
2954         planea_wm &= 0x3f;
2955         planeb_wm &= 0x3f;
2956
2957         I915_WRITE(DSPFW1, (sr_entries << DSPFW_SR_SHIFT) |
2958                    (cursorb_wm << DSPFW_CURSORB_SHIFT) |
2959                    (planeb_wm << DSPFW_PLANEB_SHIFT) | planea_wm);
2960         I915_WRITE(DSPFW2, (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) |
2961                    (cursora_wm << DSPFW_CURSORA_SHIFT));
2962         /* HPLL off in SR has some issues on G4x... disable it */
2963         I915_WRITE(DSPFW3, (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) |
2964                    (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
2965 }
2966
2967 static void i965_update_wm(struct drm_device *dev, int planea_clock,
2968                            int planeb_clock, int sr_hdisplay, int pixel_size)
2969 {
2970         struct drm_i915_private *dev_priv = dev->dev_private;
2971         unsigned long line_time_us;
2972         int sr_clock, sr_entries, srwm = 1;
2973
2974         /* Calc sr entries for one plane configs */
2975         if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
2976                 /* self-refresh has much higher latency */
2977                 static const int sr_latency_ns = 12000;
2978
2979                 sr_clock = planea_clock ? planea_clock : planeb_clock;
2980                 line_time_us = ((sr_hdisplay * 1000) / sr_clock);
2981
2982                 /* Use ns/us then divide to preserve precision */
2983                 sr_entries = (((sr_latency_ns / line_time_us) + 1) *
2984                               pixel_size * sr_hdisplay) / 1000;
2985                 sr_entries = roundup(sr_entries / I915_FIFO_LINE_SIZE, 1);
2986                 DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
2987                 srwm = I945_FIFO_SIZE - sr_entries;
2988                 if (srwm < 0)
2989                         srwm = 1;
2990                 srwm &= 0x3f;
2991                 if (IS_I965GM(dev))
2992                         I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
2993         } else {
2994                 /* Turn off self refresh if both pipes are enabled */
2995                 if (IS_I965GM(dev))
2996                         I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
2997                                    & ~FW_BLC_SELF_EN);
2998         }
2999
3000         DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
3001                       srwm);
3002
3003         /* 965 has limitations... */
3004         I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) | (8 << 16) | (8 << 8) |
3005                    (8 << 0));
3006         I915_WRITE(DSPFW2, (8 << 8) | (8 << 0));
3007 }
3008
3009 static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
3010                            int planeb_clock, int sr_hdisplay, int pixel_size)
3011 {
3012         struct drm_i915_private *dev_priv = dev->dev_private;
3013         uint32_t fwater_lo;
3014         uint32_t fwater_hi;
3015         int total_size, cacheline_size, cwm, srwm = 1;
3016         int planea_wm, planeb_wm;
3017         struct intel_watermark_params planea_params, planeb_params;
3018         unsigned long line_time_us;
3019         int sr_clock, sr_entries = 0;
3020
3021         /* Create copies of the base settings for each pipe */
3022         if (IS_I965GM(dev) || IS_I945GM(dev))
3023                 planea_params = planeb_params = i945_wm_info;
3024         else if (IS_I9XX(dev))
3025                 planea_params = planeb_params = i915_wm_info;
3026         else
3027                 planea_params = planeb_params = i855_wm_info;
3028
3029         /* Grab a couple of global values before we overwrite them */
3030         total_size = planea_params.fifo_size;
3031         cacheline_size = planea_params.cacheline_size;
3032
3033         /* Update per-plane FIFO sizes */
3034         planea_params.fifo_size = dev_priv->display.get_fifo_size(dev, 0);
3035         planeb_params.fifo_size = dev_priv->display.get_fifo_size(dev, 1);
3036
3037         planea_wm = intel_calculate_wm(planea_clock, &planea_params,
3038                                        pixel_size, latency_ns);
3039         planeb_wm = intel_calculate_wm(planeb_clock, &planeb_params,
3040                                        pixel_size, latency_ns);
3041         DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
3042
3043         /*
3044          * Overlay gets an aggressive default since video jitter is bad.
3045          */
3046         cwm = 2;
3047
3048         /* Calc sr entries for one plane configs */
3049         if (HAS_FW_BLC(dev) && sr_hdisplay &&
3050             (!planea_clock || !planeb_clock)) {
3051                 /* self-refresh has much higher latency */
3052                 static const int sr_latency_ns = 6000;
3053
3054                 sr_clock = planea_clock ? planea_clock : planeb_clock;
3055                 line_time_us = ((sr_hdisplay * 1000) / sr_clock);
3056
3057                 /* Use ns/us then divide to preserve precision */
3058                 sr_entries = (((sr_latency_ns / line_time_us) + 1) *
3059                               pixel_size * sr_hdisplay) / 1000;
3060                 sr_entries = roundup(sr_entries / cacheline_size, 1);
3061                 DRM_DEBUG_KMS("self-refresh entries: %d\n", sr_entries);
3062                 srwm = total_size - sr_entries;
3063                 if (srwm < 0)
3064                         srwm = 1;
3065
3066                 if (IS_I945G(dev) || IS_I945GM(dev))
3067                         I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_FIFO_MASK | (srwm & 0xff));
3068                 else if (IS_I915GM(dev)) {
3069                         /* 915M has a smaller SRWM field */
3070                         I915_WRITE(FW_BLC_SELF, srwm & 0x3f);
3071                         I915_WRITE(INSTPM, I915_READ(INSTPM) | INSTPM_SELF_EN);
3072                 }
3073         } else {
3074                 /* Turn off self refresh if both pipes are enabled */
3075                 if (IS_I945G(dev) || IS_I945GM(dev)) {
3076                         I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
3077                                    & ~FW_BLC_SELF_EN);
3078                 } else if (IS_I915GM(dev)) {
3079                         I915_WRITE(INSTPM, I915_READ(INSTPM) & ~INSTPM_SELF_EN);
3080                 }
3081         }
3082
3083         DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
3084                   planea_wm, planeb_wm, cwm, srwm);
3085
3086         fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
3087         fwater_hi = (cwm & 0x1f);
3088
3089         /* Set request length to 8 cachelines per fetch */
3090         fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
3091         fwater_hi = fwater_hi | (1 << 8);
3092
3093         I915_WRITE(FW_BLC, fwater_lo);
3094         I915_WRITE(FW_BLC2, fwater_hi);
3095 }
3096
3097 static void i830_update_wm(struct drm_device *dev, int planea_clock, int unused,
3098                            int unused2, int pixel_size)
3099 {
3100         struct drm_i915_private *dev_priv = dev->dev_private;
3101         uint32_t fwater_lo = I915_READ(FW_BLC) & ~0xfff;
3102         int planea_wm;
3103
3104         i830_wm_info.fifo_size = dev_priv->display.get_fifo_size(dev, 0);
3105
3106         planea_wm = intel_calculate_wm(planea_clock, &i830_wm_info,
3107                                        pixel_size, latency_ns);
3108         fwater_lo |= (3<<8) | planea_wm;
3109
3110         DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm);
3111
3112         I915_WRITE(FW_BLC, fwater_lo);
3113 }
3114
3115 #define ILK_LP0_PLANE_LATENCY           700
3116
3117 static void ironlake_update_wm(struct drm_device *dev,  int planea_clock,
3118                        int planeb_clock, int sr_hdisplay, int pixel_size)
3119 {
3120         struct drm_i915_private *dev_priv = dev->dev_private;
3121         int planea_wm, planeb_wm, cursora_wm, cursorb_wm;
3122         int sr_wm, cursor_wm;
3123         unsigned long line_time_us;
3124         int sr_clock, entries_required;
3125         u32 reg_value;
3126
3127         /* Calculate and update the watermark for plane A */
3128         if (planea_clock) {
3129                 entries_required = ((planea_clock / 1000) * pixel_size *
3130                                      ILK_LP0_PLANE_LATENCY) / 1000;
3131                 entries_required = DIV_ROUND_UP(entries_required,
3132                                    ironlake_display_wm_info.cacheline_size);
3133                 planea_wm = entries_required +
3134                             ironlake_display_wm_info.guard_size;
3135
3136                 if (planea_wm > (int)ironlake_display_wm_info.max_wm)
3137                         planea_wm = ironlake_display_wm_info.max_wm;
3138
3139                 cursora_wm = 16;
3140                 reg_value = I915_READ(WM0_PIPEA_ILK);
3141                 reg_value &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
3142                 reg_value |= (planea_wm << WM0_PIPE_PLANE_SHIFT) |
3143                              (cursora_wm & WM0_PIPE_CURSOR_MASK);
3144                 I915_WRITE(WM0_PIPEA_ILK, reg_value);
3145                 DRM_DEBUG_KMS("FIFO watermarks For pipe A - plane %d, "
3146                                 "cursor: %d\n", planea_wm, cursora_wm);
3147         }
3148         /* Calculate and update the watermark for plane B */
3149         if (planeb_clock) {
3150                 entries_required = ((planeb_clock / 1000) * pixel_size *
3151                                      ILK_LP0_PLANE_LATENCY) / 1000;
3152                 entries_required = DIV_ROUND_UP(entries_required,
3153                                    ironlake_display_wm_info.cacheline_size);
3154                 planeb_wm = entries_required +
3155                             ironlake_display_wm_info.guard_size;
3156
3157                 if (planeb_wm > (int)ironlake_display_wm_info.max_wm)
3158                         planeb_wm = ironlake_display_wm_info.max_wm;
3159
3160                 cursorb_wm = 16;
3161                 reg_value = I915_READ(WM0_PIPEB_ILK);
3162                 reg_value &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
3163                 reg_value |= (planeb_wm << WM0_PIPE_PLANE_SHIFT) |
3164                              (cursorb_wm & WM0_PIPE_CURSOR_MASK);
3165                 I915_WRITE(WM0_PIPEB_ILK, reg_value);
3166                 DRM_DEBUG_KMS("FIFO watermarks For pipe B - plane %d, "
3167                                 "cursor: %d\n", planeb_wm, cursorb_wm);
3168         }
3169
3170         /*
3171          * Calculate and update the self-refresh watermark only when one
3172          * display plane is used.
3173          */
3174         if (!planea_clock || !planeb_clock) {
3175                 int line_count;
3176                 /* Read the self-refresh latency. The unit is 0.5us */
3177                 int ilk_sr_latency = I915_READ(MLTR_ILK) & ILK_SRLT_MASK;
3178
3179                 sr_clock = planea_clock ? planea_clock : planeb_clock;
3180                 line_time_us = ((sr_hdisplay * 1000) / sr_clock);
3181
3182                 /* Use ns/us then divide to preserve precision */
3183                 line_count = ((ilk_sr_latency * 500) / line_time_us + 1000)
3184                                / 1000;
3185
3186                 /* calculate the self-refresh watermark for display plane */
3187                 entries_required = line_count * sr_hdisplay * pixel_size;
3188                 entries_required = DIV_ROUND_UP(entries_required,
3189                                    ironlake_display_srwm_info.cacheline_size);
3190                 sr_wm = entries_required +
3191                         ironlake_display_srwm_info.guard_size;
3192
3193                 /* calculate the self-refresh watermark for display cursor */
3194                 entries_required = line_count * pixel_size * 64;
3195                 entries_required = DIV_ROUND_UP(entries_required,
3196                                    ironlake_cursor_srwm_info.cacheline_size);
3197                 cursor_wm = entries_required +
3198                             ironlake_cursor_srwm_info.guard_size;
3199
3200                 /* configure watermark and enable self-refresh */
3201                 reg_value = I915_READ(WM1_LP_ILK);
3202                 reg_value &= ~(WM1_LP_LATENCY_MASK | WM1_LP_SR_MASK |
3203                                WM1_LP_CURSOR_MASK);
3204                 reg_value |= WM1_LP_SR_EN |
3205                              (ilk_sr_latency << WM1_LP_LATENCY_SHIFT) |
3206                              (sr_wm << WM1_LP_SR_SHIFT) | cursor_wm;
3207
3208                 I915_WRITE(WM1_LP_ILK, reg_value);
3209                 DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
3210                                 "cursor %d\n", sr_wm, cursor_wm);
3211
3212         } else {
3213                 /* Turn off self refresh if both pipes are enabled */
3214                 I915_WRITE(WM1_LP_ILK, I915_READ(WM1_LP_ILK) & ~WM1_LP_SR_EN);
3215         }
3216 }
3217 /**
3218  * intel_update_watermarks - update FIFO watermark values based on current modes
3219  *
3220  * Calculate watermark values for the various WM regs based on current mode
3221  * and plane configuration.
3222  *
3223  * There are several cases to deal with here:
3224  *   - normal (i.e. non-self-refresh)
3225  *   - self-refresh (SR) mode
3226  *   - lines are large relative to FIFO size (buffer can hold up to 2)
3227  *   - lines are small relative to FIFO size (buffer can hold more than 2
3228  *     lines), so need to account for TLB latency
3229  *
3230  *   The normal calculation is:
3231  *     watermark = dotclock * bytes per pixel * latency
3232  *   where latency is platform & configuration dependent (we assume pessimal
3233  *   values here).
3234  *
3235  *   The SR calculation is:
3236  *     watermark = (trunc(latency/line time)+1) * surface width *
3237  *       bytes per pixel
3238  *   where
3239  *     line time = htotal / dotclock
3240  *   and latency is assumed to be high, as above.
3241  *
3242  * The final value programmed to the register should always be rounded up,
3243  * and include an extra 2 entries to account for clock crossings.
3244  *
3245  * We don't use the sprite, so we can ignore that.  And on Crestline we have
3246  * to set the non-SR watermarks to 8.
3247   */
3248 static void intel_update_watermarks(struct drm_device *dev)
3249 {
3250         struct drm_i915_private *dev_priv = dev->dev_private;
3251         struct drm_crtc *crtc;
3252         struct intel_crtc *intel_crtc;
3253         int sr_hdisplay = 0;
3254         unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0;
3255         int enabled = 0, pixel_size = 0;
3256
3257         if (!dev_priv->display.update_wm)
3258                 return;
3259
3260         /* Get the clock config from both planes */
3261         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
3262                 intel_crtc = to_intel_crtc(crtc);
3263                 if (crtc->enabled) {
3264                         enabled++;
3265                         if (intel_crtc->plane == 0) {
3266                                 DRM_DEBUG_KMS("plane A (pipe %d) clock: %d\n",
3267                                           intel_crtc->pipe, crtc->mode.clock);
3268                                 planea_clock = crtc->mode.clock;
3269                         } else {
3270                                 DRM_DEBUG_KMS("plane B (pipe %d) clock: %d\n",
3271                                           intel_crtc->pipe, crtc->mode.clock);
3272                                 planeb_clock = crtc->mode.clock;
3273                         }
3274                         sr_hdisplay = crtc->mode.hdisplay;
3275                         sr_clock = crtc->mode.clock;
3276                         if (crtc->fb)
3277                                 pixel_size = crtc->fb->bits_per_pixel / 8;
3278                         else
3279                                 pixel_size = 4; /* by default */
3280                 }
3281         }
3282
3283         if (enabled <= 0)
3284                 return;
3285
3286         dev_priv->display.update_wm(dev, planea_clock, planeb_clock,
3287                                     sr_hdisplay, pixel_size);
3288 }
3289
3290 static int intel_crtc_mode_set(struct drm_crtc *crtc,
3291                                struct drm_display_mode *mode,
3292                                struct drm_display_mode *adjusted_mode,
3293                                int x, int y,
3294                                struct drm_framebuffer *old_fb)
3295 {
3296         struct drm_device *dev = crtc->dev;
3297         struct drm_i915_private *dev_priv = dev->dev_private;
3298         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3299         int pipe = intel_crtc->pipe;
3300         int plane = intel_crtc->plane;
3301         int fp_reg = (pipe == 0) ? FPA0 : FPB0;
3302         int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
3303         int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
3304         int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
3305         int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
3306         int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
3307         int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
3308         int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
3309         int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
3310         int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
3311         int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
3312         int dspsize_reg = (plane == 0) ? DSPASIZE : DSPBSIZE;
3313         int dsppos_reg = (plane == 0) ? DSPAPOS : DSPBPOS;
3314         int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
3315         int refclk, num_connectors = 0;
3316         intel_clock_t clock, reduced_clock;
3317         u32 dpll = 0, fp = 0, fp2 = 0, dspcntr, pipeconf;
3318         bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
3319         bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
3320         bool is_edp = false;
3321         struct drm_mode_config *mode_config = &dev->mode_config;
3322         struct drm_encoder *encoder;
3323         struct intel_encoder *intel_encoder = NULL;
3324         const intel_limit_t *limit;
3325         int ret;
3326         struct fdi_m_n m_n = {0};
3327         int data_m1_reg = (pipe == 0) ? PIPEA_DATA_M1 : PIPEB_DATA_M1;
3328         int data_n1_reg = (pipe == 0) ? PIPEA_DATA_N1 : PIPEB_DATA_N1;
3329         int link_m1_reg = (pipe == 0) ? PIPEA_LINK_M1 : PIPEB_LINK_M1;
3330         int link_n1_reg = (pipe == 0) ? PIPEA_LINK_N1 : PIPEB_LINK_N1;
3331         int pch_fp_reg = (pipe == 0) ? PCH_FPA0 : PCH_FPB0;
3332         int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
3333         int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
3334         int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL;
3335         int trans_dpll_sel = (pipe == 0) ? 0 : 1;
3336         int lvds_reg = LVDS;
3337         u32 temp;
3338         int sdvo_pixel_multiply;
3339         int target_clock;
3340
3341         drm_vblank_pre_modeset(dev, pipe);
3342
3343         list_for_each_entry(encoder, &mode_config->encoder_list, head) {
3344
3345                 if (!encoder || encoder->crtc != crtc)
3346                         continue;
3347
3348                 intel_encoder = enc_to_intel_encoder(encoder);
3349
3350                 switch (intel_encoder->type) {
3351                 case INTEL_OUTPUT_LVDS:
3352                         is_lvds = true;
3353                         break;
3354                 case INTEL_OUTPUT_SDVO:
3355                 case INTEL_OUTPUT_HDMI:
3356                         is_sdvo = true;
3357                         if (intel_encoder->needs_tv_clock)
3358                                 is_tv = true;
3359                         break;
3360                 case INTEL_OUTPUT_DVO:
3361                         is_dvo = true;
3362                         break;
3363                 case INTEL_OUTPUT_TVOUT:
3364                         is_tv = true;
3365                         break;
3366                 case INTEL_OUTPUT_ANALOG:
3367                         is_crt = true;
3368                         break;
3369                 case INTEL_OUTPUT_DISPLAYPORT:
3370                         is_dp = true;
3371                         break;
3372                 case INTEL_OUTPUT_EDP:
3373                         is_edp = true;
3374                         break;
3375                 }
3376
3377                 num_connectors++;
3378         }
3379
3380         if (is_lvds && dev_priv->lvds_use_ssc && num_connectors < 2) {
3381                 refclk = dev_priv->lvds_ssc_freq * 1000;
3382                 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
3383                                         refclk / 1000);
3384         } else if (IS_I9XX(dev)) {
3385                 refclk = 96000;
3386                 if (HAS_PCH_SPLIT(dev))
3387                         refclk = 120000; /* 120Mhz refclk */
3388         } else {
3389                 refclk = 48000;
3390         }
3391
3392
3393         /*
3394          * Returns a set of divisors for the desired target clock with the given
3395          * refclk, or FALSE.  The returned values represent the clock equation:
3396          * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
3397          */
3398         limit = intel_limit(crtc);
3399         ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock);
3400         if (!ok) {
3401                 DRM_ERROR("Couldn't find PLL settings for mode!\n");
3402                 drm_vblank_post_modeset(dev, pipe);
3403                 return -EINVAL;
3404         }
3405
3406         if (is_lvds && dev_priv->lvds_downclock_avail) {
3407                 has_reduced_clock = limit->find_pll(limit, crtc,
3408                                                             dev_priv->lvds_downclock,
3409                                                             refclk,
3410                                                             &reduced_clock);
3411                 if (has_reduced_clock && (clock.p != reduced_clock.p)) {
3412                         /*
3413                          * If the different P is found, it means that we can't
3414                          * switch the display clock by using the FP0/FP1.
3415                          * In such case we will disable the LVDS downclock
3416                          * feature.
3417                          */
3418                         DRM_DEBUG_KMS("Different P is found for "
3419                                                 "LVDS clock/downclock\n");
3420                         has_reduced_clock = 0;
3421                 }
3422         }
3423         /* SDVO TV has fixed PLL values depend on its clock range,
3424            this mirrors vbios setting. */
3425         if (is_sdvo && is_tv) {
3426                 if (adjusted_mode->clock >= 100000
3427                                 && adjusted_mode->clock < 140500) {
3428                         clock.p1 = 2;
3429                         clock.p2 = 10;
3430                         clock.n = 3;
3431                         clock.m1 = 16;
3432                         clock.m2 = 8;
3433                 } else if (adjusted_mode->clock >= 140500
3434                                 && adjusted_mode->clock <= 200000) {
3435                         clock.p1 = 1;
3436                         clock.p2 = 10;
3437                         clock.n = 6;
3438                         clock.m1 = 12;
3439                         clock.m2 = 8;
3440                 }
3441         }
3442
3443         /* FDI link */
3444         if (HAS_PCH_SPLIT(dev)) {
3445                 int lane = 0, link_bw, bpp;
3446                 /* eDP doesn't require FDI link, so just set DP M/N
3447                    according to current link config */
3448                 if (is_edp) {
3449                         target_clock = mode->clock;
3450                         intel_edp_link_config(intel_encoder,
3451                                         &lane, &link_bw);
3452                 } else {
3453                         /* DP over FDI requires target mode clock
3454                            instead of link clock */
3455                         if (is_dp)
3456                                 target_clock = mode->clock;
3457                         else
3458                                 target_clock = adjusted_mode->clock;
3459                         link_bw = 270000;
3460                 }
3461
3462                 /* determine panel color depth */
3463                 temp = I915_READ(pipeconf_reg);
3464                 temp &= ~PIPE_BPC_MASK;
3465                 if (is_lvds) {
3466                         int lvds_reg = I915_READ(PCH_LVDS);
3467                         /* the BPC will be 6 if it is 18-bit LVDS panel */
3468                         if ((lvds_reg & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
3469                                 temp |= PIPE_8BPC;
3470                         else
3471                                 temp |= PIPE_6BPC;
3472                 } else if (is_edp) {
3473                         switch (dev_priv->edp_bpp/3) {
3474                         case 8:
3475                                 temp |= PIPE_8BPC;
3476                                 break;
3477                         case 10:
3478                                 temp |= PIPE_10BPC;
3479                                 break;
3480                         case 6:
3481                                 temp |= PIPE_6BPC;
3482                                 break;
3483                         case 12:
3484                                 temp |= PIPE_12BPC;
3485                                 break;
3486                         }
3487                 } else
3488                         temp |= PIPE_8BPC;
3489                 I915_WRITE(pipeconf_reg, temp);
3490                 I915_READ(pipeconf_reg);
3491
3492                 switch (temp & PIPE_BPC_MASK) {
3493                 case PIPE_8BPC:
3494                         bpp = 24;
3495                         break;
3496                 case PIPE_10BPC:
3497                         bpp = 30;
3498                         break;
3499                 case PIPE_6BPC:
3500                         bpp = 18;
3501                         break;
3502                 case PIPE_12BPC:
3503                         bpp = 36;
3504                         break;
3505                 default:
3506                         DRM_ERROR("unknown pipe bpc value\n");
3507                         bpp = 24;
3508                 }
3509
3510                 if (!lane) {
3511                         /*
3512                          * Account for spread spectrum to avoid
3513                          * oversubscribing the link. Max center spread
3514                          * is 2.5%; use 5% for safety's sake.
3515                          */
3516                         u32 bps = target_clock * bpp * 21 / 20;
3517                         lane = bps / (link_bw * 8) + 1;
3518                 }
3519
3520                 intel_crtc->fdi_lanes = lane;
3521
3522                 ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
3523         }
3524
3525         /* Ironlake: try to setup display ref clock before DPLL
3526          * enabling. This is only under driver's control after
3527          * PCH B stepping, previous chipset stepping should be
3528          * ignoring this setting.
3529          */
3530         if (HAS_PCH_SPLIT(dev)) {
3531                 temp = I915_READ(PCH_DREF_CONTROL);
3532                 /* Always enable nonspread source */
3533                 temp &= ~DREF_NONSPREAD_SOURCE_MASK;
3534                 temp |= DREF_NONSPREAD_SOURCE_ENABLE;
3535                 I915_WRITE(PCH_DREF_CONTROL, temp);
3536                 POSTING_READ(PCH_DREF_CONTROL);
3537
3538                 temp &= ~DREF_SSC_SOURCE_MASK;
3539                 temp |= DREF_SSC_SOURCE_ENABLE;
3540                 I915_WRITE(PCH_DREF_CONTROL, temp);
3541                 POSTING_READ(PCH_DREF_CONTROL);
3542
3543                 udelay(200);
3544
3545                 if (is_edp) {
3546                         if (dev_priv->lvds_use_ssc) {
3547                                 temp |= DREF_SSC1_ENABLE;
3548                                 I915_WRITE(PCH_DREF_CONTROL, temp);
3549                                 POSTING_READ(PCH_DREF_CONTROL);
3550
3551                                 udelay(200);
3552
3553                                 temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
3554                                 temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
3555                                 I915_WRITE(PCH_DREF_CONTROL, temp);
3556                                 POSTING_READ(PCH_DREF_CONTROL);
3557                         } else {
3558                                 temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
3559                                 I915_WRITE(PCH_DREF_CONTROL, temp);
3560                                 POSTING_READ(PCH_DREF_CONTROL);
3561                         }
3562                 }
3563         }
3564
3565         if (IS_PINEVIEW(dev)) {
3566                 fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
3567                 if (has_reduced_clock)
3568                         fp2 = (1 << reduced_clock.n) << 16 |
3569                                 reduced_clock.m1 << 8 | reduced_clock.m2;
3570         } else {
3571                 fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
3572                 if (has_reduced_clock)
3573                         fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
3574                                 reduced_clock.m2;
3575         }
3576
3577         if (!HAS_PCH_SPLIT(dev))
3578                 dpll = DPLL_VGA_MODE_DIS;
3579
3580         if (IS_I9XX(dev)) {
3581                 if (is_lvds)
3582                         dpll |= DPLLB_MODE_LVDS;
3583                 else
3584                         dpll |= DPLLB_MODE_DAC_SERIAL;
3585                 if (is_sdvo) {
3586                         dpll |= DPLL_DVO_HIGH_SPEED;
3587                         sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
3588                         if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
3589                                 dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
3590                         else if (HAS_PCH_SPLIT(dev))
3591                                 dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
3592                 }
3593                 if (is_dp)
3594                         dpll |= DPLL_DVO_HIGH_SPEED;
3595
3596                 /* compute bitmask from p1 value */
3597                 if (IS_PINEVIEW(dev))
3598                         dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
3599                 else {
3600                         dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
3601                         /* also FPA1 */
3602                         if (HAS_PCH_SPLIT(dev))
3603                                 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
3604                         if (IS_G4X(dev) && has_reduced_clock)
3605                                 dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
3606                 }
3607                 switch (clock.p2) {
3608                 case 5:
3609                         dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
3610                         break;
3611                 case 7:
3612                         dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
3613                         break;
3614                 case 10:
3615                         dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
3616                         break;
3617                 case 14:
3618                         dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
3619                         break;
3620                 }
3621                 if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev))
3622                         dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
3623         } else {
3624                 if (is_lvds) {
3625                         dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
3626                 } else {
3627                         if (clock.p1 == 2)
3628                                 dpll |= PLL_P1_DIVIDE_BY_TWO;
3629                         else
3630                                 dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
3631                         if (clock.p2 == 4)
3632                                 dpll |= PLL_P2_DIVIDE_BY_4;
3633                 }
3634         }
3635
3636         if (is_sdvo && is_tv)
3637                 dpll |= PLL_REF_INPUT_TVCLKINBC;
3638         else if (is_tv)
3639                 /* XXX: just matching BIOS for now */
3640                 /*      dpll |= PLL_REF_INPUT_TVCLKINBC; */
3641                 dpll |= 3;
3642         else if (is_lvds && dev_priv->lvds_use_ssc && num_connectors < 2)
3643                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
3644         else
3645                 dpll |= PLL_REF_INPUT_DREFCLK;
3646
3647         /* setup pipeconf */
3648         pipeconf = I915_READ(pipeconf_reg);
3649
3650         /* Set up the display plane register */
3651         dspcntr = DISPPLANE_GAMMA_ENABLE;
3652
3653         /* Ironlake's plane is forced to pipe, bit 24 is to
3654            enable color space conversion */
3655         if (!HAS_PCH_SPLIT(dev)) {
3656                 if (pipe == 0)
3657                         dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
3658                 else
3659                         dspcntr |= DISPPLANE_SEL_PIPE_B;
3660         }
3661
3662         if (pipe == 0 && !IS_I965G(dev)) {
3663                 /* Enable pixel doubling when the dot clock is > 90% of the (display)
3664                  * core speed.
3665                  *
3666                  * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
3667                  * pipe == 0 check?
3668                  */
3669                 if (mode->clock >
3670                     dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
3671                         pipeconf |= PIPEACONF_DOUBLE_WIDE;
3672                 else
3673                         pipeconf &= ~PIPEACONF_DOUBLE_WIDE;
3674         }
3675
3676         dspcntr |= DISPLAY_PLANE_ENABLE;
3677         pipeconf |= PIPEACONF_ENABLE;
3678         dpll |= DPLL_VCO_ENABLE;
3679
3680
3681         /* Disable the panel fitter if it was on our pipe */
3682         if (!HAS_PCH_SPLIT(dev) && intel_panel_fitter_pipe(dev) == pipe)
3683                 I915_WRITE(PFIT_CONTROL, 0);
3684
3685         DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
3686         drm_mode_debug_printmodeline(mode);
3687
3688         /* assign to Ironlake registers */
3689         if (HAS_PCH_SPLIT(dev)) {
3690                 fp_reg = pch_fp_reg;
3691                 dpll_reg = pch_dpll_reg;
3692         }
3693
3694         if (is_edp) {
3695                 ironlake_disable_pll_edp(crtc);
3696         } else if ((dpll & DPLL_VCO_ENABLE)) {
3697                 I915_WRITE(fp_reg, fp);
3698                 I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
3699                 I915_READ(dpll_reg);
3700                 udelay(150);
3701         }
3702
3703         /* enable transcoder DPLL */
3704         if (HAS_PCH_CPT(dev)) {
3705                 temp = I915_READ(PCH_DPLL_SEL);
3706                 if (trans_dpll_sel == 0)
3707                         temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
3708                 else
3709                         temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
3710                 I915_WRITE(PCH_DPLL_SEL, temp);
3711                 I915_READ(PCH_DPLL_SEL);
3712                 udelay(150);
3713         }
3714
3715         /* The LVDS pin pair needs to be on before the DPLLs are enabled.
3716          * This is an exception to the general rule that mode_set doesn't turn
3717          * things on.
3718          */
3719         if (is_lvds) {
3720                 u32 lvds;
3721
3722                 if (HAS_PCH_SPLIT(dev))
3723                         lvds_reg = PCH_LVDS;
3724
3725                 lvds = I915_READ(lvds_reg);
3726                 lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
3727                 if (pipe == 1) {
3728                         if (HAS_PCH_CPT(dev))
3729                                 lvds |= PORT_TRANS_B_SEL_CPT;
3730                         else
3731                                 lvds |= LVDS_PIPEB_SELECT;
3732                 } else {
3733                         if (HAS_PCH_CPT(dev))
3734                                 lvds &= ~PORT_TRANS_SEL_MASK;
3735                         else
3736                                 lvds &= ~LVDS_PIPEB_SELECT;
3737                 }
3738                 /* set the corresponsding LVDS_BORDER bit */
3739                 lvds |= dev_priv->lvds_border_bits;
3740                 /* Set the B0-B3 data pairs corresponding to whether we're going to
3741                  * set the DPLLs for dual-channel mode or not.
3742                  */
3743                 if (clock.p2 == 7)
3744                         lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
3745                 else
3746                         lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
3747
3748                 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
3749                  * appropriately here, but we need to look more thoroughly into how
3750                  * panels behave in the two modes.
3751                  */
3752                 /* set the dithering flag */
3753                 if (IS_I965G(dev)) {
3754                         if (dev_priv->lvds_dither) {
3755                                 if (HAS_PCH_SPLIT(dev)) {
3756                                         pipeconf |= PIPE_ENABLE_DITHER;
3757                                         pipeconf &= ~PIPE_DITHER_TYPE_MASK;
3758                                         pipeconf |= PIPE_DITHER_TYPE_ST01;
3759                                 } else
3760                                         lvds |= LVDS_ENABLE_DITHER;
3761                         } else {
3762                                 if (HAS_PCH_SPLIT(dev)) {
3763                                         pipeconf &= ~PIPE_ENABLE_DITHER;
3764                                         pipeconf &= ~PIPE_DITHER_TYPE_MASK;
3765                                 } else
3766                                         lvds &= ~LVDS_ENABLE_DITHER;
3767                         }
3768                 }
3769                 I915_WRITE(lvds_reg, lvds);
3770                 I915_READ(lvds_reg);
3771         }
3772         if (is_dp)
3773                 intel_dp_set_m_n(crtc, mode, adjusted_mode);
3774         else if (HAS_PCH_SPLIT(dev)) {
3775                 /* For non-DP output, clear any trans DP clock recovery setting.*/
3776                 if (pipe == 0) {
3777                         I915_WRITE(TRANSA_DATA_M1, 0);
3778                         I915_WRITE(TRANSA_DATA_N1, 0);
3779                         I915_WRITE(TRANSA_DP_LINK_M1, 0);
3780                         I915_WRITE(TRANSA_DP_LINK_N1, 0);
3781                 } else {
3782                         I915_WRITE(TRANSB_DATA_M1, 0);
3783                         I915_WRITE(TRANSB_DATA_N1, 0);
3784                         I915_WRITE(TRANSB_DP_LINK_M1, 0);
3785                         I915_WRITE(TRANSB_DP_LINK_N1, 0);
3786                 }
3787         }
3788
3789         if (!is_edp) {
3790                 I915_WRITE(fp_reg, fp);
3791                 I915_WRITE(dpll_reg, dpll);
3792                 I915_READ(dpll_reg);
3793                 /* Wait for the clocks to stabilize. */
3794                 udelay(150);
3795
3796                 if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev)) {
3797                         if (is_sdvo) {
3798                                 sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
3799                                 I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
3800                                         ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
3801                         } else
3802                                 I915_WRITE(dpll_md_reg, 0);
3803                 } else {
3804                         /* write it again -- the BIOS does, after all */
3805                         I915_WRITE(dpll_reg, dpll);
3806                 }
3807                 I915_READ(dpll_reg);
3808                 /* Wait for the clocks to stabilize. */
3809                 udelay(150);
3810         }
3811
3812         if (is_lvds && has_reduced_clock && i915_powersave) {
3813                 I915_WRITE(fp_reg + 4, fp2);
3814                 intel_crtc->lowfreq_avail = true;
3815                 if (HAS_PIPE_CXSR(dev)) {
3816                         DRM_DEBUG_KMS("enabling CxSR downclocking\n");
3817                         pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
3818                 }
3819         } else {
3820                 I915_WRITE(fp_reg + 4, fp);
3821                 intel_crtc->lowfreq_avail = false;
3822                 if (HAS_PIPE_CXSR(dev)) {
3823                         DRM_DEBUG_KMS("disabling CxSR downclocking\n");
3824                         pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
3825                 }
3826         }
3827
3828         if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
3829                 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
3830                 /* the chip adds 2 halflines automatically */
3831                 adjusted_mode->crtc_vdisplay -= 1;
3832                 adjusted_mode->crtc_vtotal -= 1;
3833                 adjusted_mode->crtc_vblank_start -= 1;
3834                 adjusted_mode->crtc_vblank_end -= 1;
3835                 adjusted_mode->crtc_vsync_end -= 1;
3836                 adjusted_mode->crtc_vsync_start -= 1;
3837         } else
3838                 pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */
3839
3840         I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
3841                    ((adjusted_mode->crtc_htotal - 1) << 16));
3842         I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
3843                    ((adjusted_mode->crtc_hblank_end - 1) << 16));
3844         I915_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
3845                    ((adjusted_mode->crtc_hsync_end - 1) << 16));
3846         I915_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
3847                    ((adjusted_mode->crtc_vtotal - 1) << 16));
3848         I915_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
3849                    ((adjusted_mode->crtc_vblank_end - 1) << 16));
3850         I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
3851                    ((adjusted_mode->crtc_vsync_end - 1) << 16));
3852         /* pipesrc and dspsize control the size that is scaled from, which should
3853          * always be the user's requested size.
3854          */
3855         if (!HAS_PCH_SPLIT(dev)) {
3856                 I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) |
3857                                 (mode->hdisplay - 1));
3858                 I915_WRITE(dsppos_reg, 0);
3859         }
3860         I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
3861
3862         if (HAS_PCH_SPLIT(dev)) {
3863                 I915_WRITE(data_m1_reg, TU_SIZE(m_n.tu) | m_n.gmch_m);
3864                 I915_WRITE(data_n1_reg, TU_SIZE(m_n.tu) | m_n.gmch_n);
3865                 I915_WRITE(link_m1_reg, m_n.link_m);
3866                 I915_WRITE(link_n1_reg, m_n.link_n);
3867
3868                 if (is_edp) {
3869                         ironlake_set_pll_edp(crtc, adjusted_mode->clock);
3870                 } else {
3871                         /* enable FDI RX PLL too */
3872                         temp = I915_READ(fdi_rx_reg);
3873                         I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
3874                         I915_READ(fdi_rx_reg);
3875                         udelay(200);
3876
3877                         /* enable FDI TX PLL too */
3878                         temp = I915_READ(fdi_tx_reg);
3879                         I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
3880                         I915_READ(fdi_tx_reg);
3881
3882                         /* enable FDI RX PCDCLK */
3883                         temp = I915_READ(fdi_rx_reg);
3884                         I915_WRITE(fdi_rx_reg, temp | FDI_SEL_PCDCLK);
3885                         I915_READ(fdi_rx_reg);
3886                         udelay(200);
3887                 }
3888         }
3889
3890         I915_WRITE(pipeconf_reg, pipeconf);
3891         I915_READ(pipeconf_reg);
3892
3893         intel_wait_for_vblank(dev);
3894
3895         if (IS_IRONLAKE(dev)) {
3896                 /* enable address swizzle for tiling buffer */
3897                 temp = I915_READ(DISP_ARB_CTL);
3898                 I915_WRITE(DISP_ARB_CTL, temp | DISP_TILE_SURFACE_SWIZZLING);
3899         }
3900
3901         I915_WRITE(dspcntr_reg, dspcntr);
3902
3903         /* Flush the plane changes */
3904         ret = intel_pipe_set_base(crtc, x, y, old_fb);
3905
3906         if ((IS_I965G(dev) || plane == 0))
3907                 intel_update_fbc(crtc, &crtc->mode);
3908
3909         intel_update_watermarks(dev);
3910
3911         drm_vblank_post_modeset(dev, pipe);
3912
3913         return ret;
3914 }
3915
3916 /** Loads the palette/gamma unit for the CRTC with the prepared values */
3917 void intel_crtc_load_lut(struct drm_crtc *crtc)
3918 {
3919         struct drm_device *dev = crtc->dev;
3920         struct drm_i915_private *dev_priv = dev->dev_private;
3921         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3922         int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B;
3923         int i;
3924
3925         /* The clocks have to be on to load the palette. */
3926         if (!crtc->enabled)
3927                 return;
3928
3929         /* use legacy palette for Ironlake */
3930         if (HAS_PCH_SPLIT(dev))
3931                 palreg = (intel_crtc->pipe == 0) ? LGC_PALETTE_A :
3932                                                    LGC_PALETTE_B;
3933
3934         for (i = 0; i < 256; i++) {
3935                 I915_WRITE(palreg + 4 * i,
3936                            (intel_crtc->lut_r[i] << 16) |
3937                            (intel_crtc->lut_g[i] << 8) |
3938                            intel_crtc->lut_b[i]);
3939         }
3940 }
3941
3942 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
3943                                  struct drm_file *file_priv,
3944                                  uint32_t handle,
3945                                  uint32_t width, uint32_t height)
3946 {
3947         struct drm_device *dev = crtc->dev;
3948         struct drm_i915_private *dev_priv = dev->dev_private;
3949         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3950         struct drm_gem_object *bo;
3951         struct drm_i915_gem_object *obj_priv;
3952         int pipe = intel_crtc->pipe;
3953         uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
3954         uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
3955         uint32_t temp = I915_READ(control);
3956         size_t addr;
3957         int ret;
3958
3959         DRM_DEBUG_KMS("\n");
3960
3961         /* if we want to turn off the cursor ignore width and height */
3962         if (!handle) {
3963                 DRM_DEBUG_KMS("cursor off\n");
3964                 if (IS_MOBILE(dev) || IS_I9XX(dev)) {
3965                         temp &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
3966                         temp |= CURSOR_MODE_DISABLE;
3967                 } else {
3968                         temp &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
3969                 }
3970                 addr = 0;
3971                 bo = NULL;
3972                 mutex_lock(&dev->struct_mutex);
3973                 goto finish;
3974         }
3975
3976         /* Currently we only support 64x64 cursors */
3977         if (width != 64 || height != 64) {
3978                 DRM_ERROR("we currently only support 64x64 cursors\n");
3979                 return -EINVAL;
3980         }
3981
3982         bo = drm_gem_object_lookup(dev, file_priv, handle);
3983         if (!bo)
3984                 return -ENOENT;
3985
3986         obj_priv = to_intel_bo(bo);
3987
3988         if (bo->size < width * height * 4) {
3989                 DRM_ERROR("buffer is to small\n");
3990                 ret = -ENOMEM;
3991                 goto fail;
3992         }
3993
3994         /* we only need to pin inside GTT if cursor is non-phy */
3995         mutex_lock(&dev->struct_mutex);
3996         if (!dev_priv->info->cursor_needs_physical) {
3997                 ret = i915_gem_object_pin(bo, PAGE_SIZE);
3998                 if (ret) {
3999                         DRM_ERROR("failed to pin cursor bo\n");
4000                         goto fail_locked;
4001                 }
4002
4003                 ret = i915_gem_object_set_to_gtt_domain(bo, 0);
4004                 if (ret) {
4005                         DRM_ERROR("failed to move cursor bo into the GTT\n");
4006                         goto fail_unpin;
4007                 }
4008
4009                 addr = obj_priv->gtt_offset;
4010         } else {
4011                 ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
4012                 if (ret) {
4013                         DRM_ERROR("failed to attach phys object\n");
4014                         goto fail_locked;
4015                 }
4016                 addr = obj_priv->phys_obj->handle->busaddr;
4017         }
4018
4019         if (!IS_I9XX(dev))
4020                 I915_WRITE(CURSIZE, (height << 12) | width);
4021
4022         /* Hooray for CUR*CNTR differences */
4023         if (IS_MOBILE(dev) || IS_I9XX(dev)) {
4024                 temp &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
4025                 temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
4026                 temp |= (pipe << 28); /* Connect to correct pipe */
4027         } else {
4028                 temp &= ~(CURSOR_FORMAT_MASK);
4029                 temp |= CURSOR_ENABLE;
4030                 temp |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE;
4031         }
4032
4033  finish:
4034         I915_WRITE(control, temp);
4035         I915_WRITE(base, addr);
4036
4037         if (intel_crtc->cursor_bo) {
4038                 if (dev_priv->info->cursor_needs_physical) {
4039                         if (intel_crtc->cursor_bo != bo)
4040                                 i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
4041                 } else
4042                         i915_gem_object_unpin(intel_crtc->cursor_bo);
4043                 drm_gem_object_unreference(intel_crtc->cursor_bo);
4044         }
4045
4046         mutex_unlock(&dev->struct_mutex);
4047
4048         intel_crtc->cursor_addr = addr;
4049         intel_crtc->cursor_bo = bo;
4050
4051         return 0;
4052 fail_unpin:
4053         i915_gem_object_unpin(bo);
4054 fail_locked:
4055         mutex_unlock(&dev->struct_mutex);
4056 fail:
4057         drm_gem_object_unreference_unlocked(bo);
4058         return ret;
4059 }
4060
4061 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
4062 {
4063         struct drm_device *dev = crtc->dev;
4064         struct drm_i915_private *dev_priv = dev->dev_private;
4065         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4066         struct intel_framebuffer *intel_fb;
4067         int pipe = intel_crtc->pipe;
4068         uint32_t temp = 0;
4069         uint32_t adder;
4070
4071         if (crtc->fb) {
4072                 intel_fb = to_intel_framebuffer(crtc->fb);
4073                 intel_mark_busy(dev, intel_fb->obj);
4074         }
4075
4076         if (x < 0) {
4077                 temp |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
4078                 x = -x;
4079         }
4080         if (y < 0) {
4081                 temp |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
4082                 y = -y;
4083         }
4084
4085         temp |= x << CURSOR_X_SHIFT;
4086         temp |= y << CURSOR_Y_SHIFT;
4087
4088         adder = intel_crtc->cursor_addr;
4089         I915_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
4090         I915_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder);
4091
4092         return 0;
4093 }
4094
4095 /** Sets the color ramps on behalf of RandR */
4096 void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
4097                                  u16 blue, int regno)
4098 {
4099         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4100
4101         intel_crtc->lut_r[regno] = red >> 8;
4102         intel_crtc->lut_g[regno] = green >> 8;
4103         intel_crtc->lut_b[regno] = blue >> 8;
4104 }
4105
4106 void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
4107                              u16 *blue, int regno)
4108 {
4109         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4110
4111         *red = intel_crtc->lut_r[regno] << 8;
4112         *green = intel_crtc->lut_g[regno] << 8;
4113         *blue = intel_crtc->lut_b[regno] << 8;
4114 }
4115
4116 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
4117                                  u16 *blue, uint32_t size)
4118 {
4119         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4120         int i;
4121
4122         if (size != 256)
4123                 return;
4124
4125         for (i = 0; i < 256; i++) {
4126                 intel_crtc->lut_r[i] = red[i] >> 8;
4127                 intel_crtc->lut_g[i] = green[i] >> 8;
4128                 intel_crtc->lut_b[i] = blue[i] >> 8;
4129         }
4130
4131         intel_crtc_load_lut(crtc);
4132 }
4133
4134 /**
4135  * Get a pipe with a simple mode set on it for doing load-based monitor
4136  * detection.
4137  *
4138  * It will be up to the load-detect code to adjust the pipe as appropriate for
4139  * its requirements.  The pipe will be connected to no other encoders.
4140  *
4141  * Currently this code will only succeed if there is a pipe with no encoders
4142  * configured for it.  In the future, it could choose to temporarily disable
4143  * some outputs to free up a pipe for its use.
4144  *
4145  * \return crtc, or NULL if no pipes are available.
4146  */
4147
4148 /* VESA 640x480x72Hz mode to set on the pipe */
4149 static struct drm_display_mode load_detect_mode = {
4150         DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
4151                  704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
4152 };
4153
4154 struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
4155                                             struct drm_connector *connector,
4156                                             struct drm_display_mode *mode,
4157                                             int *dpms_mode)
4158 {
4159         struct intel_crtc *intel_crtc;
4160         struct drm_crtc *possible_crtc;
4161         struct drm_crtc *supported_crtc =NULL;
4162         struct drm_encoder *encoder = &intel_encoder->enc;
4163         struct drm_crtc *crtc = NULL;
4164         struct drm_device *dev = encoder->dev;
4165         struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
4166         struct drm_crtc_helper_funcs *crtc_funcs;
4167         int i = -1;
4168
4169         /*
4170          * Algorithm gets a little messy:
4171          *   - if the connector already has an assigned crtc, use it (but make
4172          *     sure it's on first)
4173          *   - try to find the first unused crtc that can drive this connector,
4174          *     and use that if we find one
4175          *   - if there are no unused crtcs available, try to use the first
4176          *     one we found that supports the connector
4177          */
4178
4179         /* See if we already have a CRTC for this connector */
4180         if (encoder->crtc) {
4181                 crtc = encoder->crtc;
4182                 /* Make sure the crtc and connector are running */
4183                 intel_crtc = to_intel_crtc(crtc);
4184                 *dpms_mode = intel_crtc->dpms_mode;
4185                 if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
4186                         crtc_funcs = crtc->helper_private;
4187                         crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
4188                         encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
4189                 }
4190                 return crtc;
4191         }
4192
4193         /* Find an unused one (if possible) */
4194         list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
4195                 i++;
4196                 if (!(encoder->possible_crtcs & (1 << i)))
4197                         continue;
4198                 if (!possible_crtc->enabled) {
4199                         crtc = possible_crtc;
4200                         break;
4201                 }
4202                 if (!supported_crtc)
4203                         supported_crtc = possible_crtc;
4204         }
4205
4206         /*
4207          * If we didn't find an unused CRTC, don't use any.
4208          */
4209         if (!crtc) {
4210                 return NULL;
4211         }
4212
4213         encoder->crtc = crtc;
4214         connector->encoder = encoder;
4215         intel_encoder->load_detect_temp = true;
4216
4217         intel_crtc = to_intel_crtc(crtc);
4218         *dpms_mode = intel_crtc->dpms_mode;
4219
4220         if (!crtc->enabled) {
4221                 if (!mode)
4222                         mode = &load_detect_mode;
4223                 drm_crtc_helper_set_mode(crtc, mode, 0, 0, crtc->fb);
4224         } else {
4225                 if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
4226                         crtc_funcs = crtc->helper_private;
4227                         crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
4228                 }
4229
4230                 /* Add this connector to the crtc */
4231                 encoder_funcs->mode_set(encoder, &crtc->mode, &crtc->mode);
4232                 encoder_funcs->commit(encoder);
4233         }
4234         /* let the connector get through one full cycle before testing */
4235         intel_wait_for_vblank(dev);
4236
4237         return crtc;
4238 }
4239
4240 void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
4241                                     struct drm_connector *connector, int dpms_mode)
4242 {
4243         struct drm_encoder *encoder = &intel_encoder->enc;
4244         struct drm_device *dev = encoder->dev;
4245         struct drm_crtc *crtc = encoder->crtc;
4246         struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
4247         struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
4248
4249         if (intel_encoder->load_detect_temp) {
4250                 encoder->crtc = NULL;
4251                 connector->encoder = NULL;
4252                 intel_encoder->load_detect_temp = false;
4253                 crtc->enabled = drm_helper_crtc_in_use(crtc);
4254                 drm_helper_disable_unused_functions(dev);
4255         }
4256
4257         /* Switch crtc and encoder back off if necessary */
4258         if (crtc->enabled && dpms_mode != DRM_MODE_DPMS_ON) {
4259                 if (encoder->crtc == crtc)
4260                         encoder_funcs->dpms(encoder, dpms_mode);
4261                 crtc_funcs->dpms(crtc, dpms_mode);
4262         }
4263 }
4264
4265 /* Returns the clock of the currently programmed mode of the given pipe. */
4266 static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
4267 {
4268         struct drm_i915_private *dev_priv = dev->dev_private;
4269         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4270         int pipe = intel_crtc->pipe;
4271         u32 dpll = I915_READ((pipe == 0) ? DPLL_A : DPLL_B);
4272         u32 fp;
4273         intel_clock_t clock;
4274
4275         if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
4276                 fp = I915_READ((pipe == 0) ? FPA0 : FPB0);
4277         else
4278                 fp = I915_READ((pipe == 0) ? FPA1 : FPB1);
4279
4280         clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
4281         if (IS_PINEVIEW(dev)) {
4282                 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
4283                 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
4284         } else {
4285                 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
4286                 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
4287         }
4288
4289         if (IS_I9XX(dev)) {
4290                 if (IS_PINEVIEW(dev))
4291                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
4292                                 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
4293                 else
4294                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
4295                                DPLL_FPA01_P1_POST_DIV_SHIFT);
4296
4297                 switch (dpll & DPLL_MODE_MASK) {
4298                 case DPLLB_MODE_DAC_SERIAL:
4299                         clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
4300                                 5 : 10;
4301                         break;
4302                 case DPLLB_MODE_LVDS:
4303                         clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
4304                                 7 : 14;
4305                         break;
4306                 default:
4307                         DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
4308                                   "mode\n", (int)(dpll & DPLL_MODE_MASK));
4309                         return 0;
4310                 }
4311
4312                 /* XXX: Handle the 100Mhz refclk */
4313                 intel_clock(dev, 96000, &clock);
4314         } else {
4315                 bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
4316
4317                 if (is_lvds) {
4318                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
4319                                        DPLL_FPA01_P1_POST_DIV_SHIFT);
4320                         clock.p2 = 14;
4321
4322                         if ((dpll & PLL_REF_INPUT_MASK) ==
4323                             PLLB_REF_INPUT_SPREADSPECTRUMIN) {
4324                                 /* XXX: might not be 66MHz */
4325                                 intel_clock(dev, 66000, &clock);
4326                         } else
4327                                 intel_clock(dev, 48000, &clock);
4328                 } else {
4329                         if (dpll & PLL_P1_DIVIDE_BY_TWO)
4330                                 clock.p1 = 2;
4331                         else {
4332                                 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
4333                                             DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
4334                         }
4335                         if (dpll & PLL_P2_DIVIDE_BY_4)
4336                                 clock.p2 = 4;
4337                         else
4338                                 clock.p2 = 2;
4339
4340                         intel_clock(dev, 48000, &clock);
4341                 }
4342         }
4343
4344         /* XXX: It would be nice to validate the clocks, but we can't reuse
4345          * i830PllIsValid() because it relies on the xf86_config connector
4346          * configuration being accurate, which it isn't necessarily.
4347          */
4348
4349         return clock.dot;
4350 }
4351
4352 /** Returns the currently programmed mode of the given pipe. */
4353 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
4354                                              struct drm_crtc *crtc)
4355 {
4356         struct drm_i915_private *dev_priv = dev->dev_private;
4357         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4358         int pipe = intel_crtc->pipe;
4359         struct drm_display_mode *mode;
4360         int htot = I915_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B);
4361         int hsync = I915_READ((pipe == 0) ? HSYNC_A : HSYNC_B);
4362         int vtot = I915_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B);
4363         int vsync = I915_READ((pipe == 0) ? VSYNC_A : VSYNC_B);
4364
4365         mode = kzalloc(sizeof(*mode), GFP_KERNEL);
4366         if (!mode)
4367                 return NULL;
4368
4369         mode->clock = intel_crtc_clock_get(dev, crtc);
4370         mode->hdisplay = (htot & 0xffff) + 1;
4371         mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
4372         mode->hsync_start = (hsync & 0xffff) + 1;
4373         mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
4374         mode->vdisplay = (vtot & 0xffff) + 1;
4375         mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
4376         mode->vsync_start = (vsync & 0xffff) + 1;
4377         mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
4378
4379         drm_mode_set_name(mode);
4380         drm_mode_set_crtcinfo(mode, 0);
4381
4382         return mode;
4383 }
4384
4385 #define GPU_IDLE_TIMEOUT 500 /* ms */
4386
4387 /* When this timer fires, we've been idle for awhile */
4388 static void intel_gpu_idle_timer(unsigned long arg)
4389 {
4390         struct drm_device *dev = (struct drm_device *)arg;
4391         drm_i915_private_t *dev_priv = dev->dev_private;
4392
4393         DRM_DEBUG_DRIVER("idle timer fired, downclocking\n");
4394
4395         dev_priv->busy = false;
4396
4397         queue_work(dev_priv->wq, &dev_priv->idle_work);
4398 }
4399
4400 #define CRTC_IDLE_TIMEOUT 1000 /* ms */
4401
4402 static void intel_crtc_idle_timer(unsigned long arg)
4403 {
4404         struct intel_crtc *intel_crtc = (struct intel_crtc *)arg;
4405         struct drm_crtc *crtc = &intel_crtc->base;
4406         drm_i915_private_t *dev_priv = crtc->dev->dev_private;
4407
4408         DRM_DEBUG_DRIVER("idle timer fired, downclocking\n");
4409
4410         intel_crtc->busy = false;
4411
4412         queue_work(dev_priv->wq, &dev_priv->idle_work);
4413 }
4414
4415 static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule)
4416 {
4417         struct drm_device *dev = crtc->dev;
4418         drm_i915_private_t *dev_priv = dev->dev_private;
4419         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4420         int pipe = intel_crtc->pipe;
4421         int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
4422         int dpll = I915_READ(dpll_reg);
4423
4424         if (HAS_PCH_SPLIT(dev))
4425                 return;
4426
4427         if (!dev_priv->lvds_downclock_avail)
4428                 return;
4429
4430         if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
4431                 DRM_DEBUG_DRIVER("upclocking LVDS\n");
4432
4433                 /* Unlock panel regs */
4434                 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
4435                            PANEL_UNLOCK_REGS);
4436
4437                 dpll &= ~DISPLAY_RATE_SELECT_FPA1;
4438                 I915_WRITE(dpll_reg, dpll);
4439                 dpll = I915_READ(dpll_reg);
4440                 intel_wait_for_vblank(dev);
4441                 dpll = I915_READ(dpll_reg);
4442                 if (dpll & DISPLAY_RATE_SELECT_FPA1)
4443                         DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
4444
4445                 /* ...and lock them again */
4446                 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & 0x3);
4447         }
4448
4449         /* Schedule downclock */
4450         if (schedule)
4451                 mod_timer(&intel_crtc->idle_timer, jiffies +
4452                           msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
4453 }
4454
4455 static void intel_decrease_pllclock(struct drm_crtc *crtc)
4456 {
4457         struct drm_device *dev = crtc->dev;
4458         drm_i915_private_t *dev_priv = dev->dev_private;
4459         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4460         int pipe = intel_crtc->pipe;
4461         int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
4462         int dpll = I915_READ(dpll_reg);
4463
4464         if (HAS_PCH_SPLIT(dev))
4465                 return;
4466
4467         if (!dev_priv->lvds_downclock_avail)
4468                 return;
4469
4470         /*
4471          * Since this is called by a timer, we should never get here in
4472          * the manual case.
4473          */
4474         if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
4475                 DRM_DEBUG_DRIVER("downclocking LVDS\n");
4476
4477                 /* Unlock panel regs */
4478                 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
4479                            PANEL_UNLOCK_REGS);
4480
4481                 dpll |= DISPLAY_RATE_SELECT_FPA1;
4482                 I915_WRITE(dpll_reg, dpll);
4483                 dpll = I915_READ(dpll_reg);
4484                 intel_wait_for_vblank(dev);
4485                 dpll = I915_READ(dpll_reg);
4486                 if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
4487                         DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
4488
4489                 /* ...and lock them again */
4490                 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & 0x3);
4491         }
4492
4493 }
4494
4495 /**
4496  * intel_idle_update - adjust clocks for idleness
4497  * @work: work struct
4498  *
4499  * Either the GPU or display (or both) went idle.  Check the busy status
4500  * here and adjust the CRTC and GPU clocks as necessary.
4501  */
4502 static void intel_idle_update(struct work_struct *work)
4503 {
4504         drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
4505                                                     idle_work);
4506         struct drm_device *dev = dev_priv->dev;
4507         struct drm_crtc *crtc;
4508         struct intel_crtc *intel_crtc;
4509         int enabled = 0;
4510
4511         if (!i915_powersave)
4512                 return;
4513
4514         mutex_lock(&dev->struct_mutex);
4515
4516         i915_update_gfx_val(dev_priv);
4517
4518         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
4519                 /* Skip inactive CRTCs */
4520                 if (!crtc->fb)
4521                         continue;
4522
4523                 enabled++;
4524                 intel_crtc = to_intel_crtc(crtc);
4525                 if (!intel_crtc->busy)
4526                         intel_decrease_pllclock(crtc);
4527         }
4528
4529         if ((enabled == 1) && (IS_I945G(dev) || IS_I945GM(dev))) {
4530                 DRM_DEBUG_DRIVER("enable memory self refresh on 945\n");
4531                 I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
4532         }
4533
4534         mutex_unlock(&dev->struct_mutex);
4535 }
4536
4537 /**
4538  * intel_mark_busy - mark the GPU and possibly the display busy
4539  * @dev: drm device
4540  * @obj: object we're operating on
4541  *
4542  * Callers can use this function to indicate that the GPU is busy processing
4543  * commands.  If @obj matches one of the CRTC objects (i.e. it's a scanout
4544  * buffer), we'll also mark the display as busy, so we know to increase its
4545  * clock frequency.
4546  */
4547 void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj)
4548 {
4549         drm_i915_private_t *dev_priv = dev->dev_private;
4550         struct drm_crtc *crtc = NULL;
4551         struct intel_framebuffer *intel_fb;
4552         struct intel_crtc *intel_crtc;
4553
4554         if (!drm_core_check_feature(dev, DRIVER_MODESET))
4555                 return;
4556
4557         if (!dev_priv->busy) {
4558                 if (IS_I945G(dev) || IS_I945GM(dev)) {
4559                         u32 fw_blc_self;
4560
4561                         DRM_DEBUG_DRIVER("disable memory self refresh on 945\n");
4562                         fw_blc_self = I915_READ(FW_BLC_SELF);
4563                         fw_blc_self &= ~FW_BLC_SELF_EN;
4564                         I915_WRITE(FW_BLC_SELF, fw_blc_self | FW_BLC_SELF_EN_MASK);
4565                 }
4566                 dev_priv->busy = true;
4567         } else
4568                 mod_timer(&dev_priv->idle_timer, jiffies +
4569                           msecs_to_jiffies(GPU_IDLE_TIMEOUT));
4570
4571         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
4572                 if (!crtc->fb)
4573                         continue;
4574
4575                 intel_crtc = to_intel_crtc(crtc);
4576                 intel_fb = to_intel_framebuffer(crtc->fb);
4577                 if (intel_fb->obj == obj) {
4578                         if (!intel_crtc->busy) {
4579                                 if (IS_I945G(dev) || IS_I945GM(dev)) {
4580                                         u32 fw_blc_self;
4581
4582                                         DRM_DEBUG_DRIVER("disable memory self refresh on 945\n");
4583                                         fw_blc_self = I915_READ(FW_BLC_SELF);
4584                                         fw_blc_self &= ~FW_BLC_SELF_EN;
4585                                         I915_WRITE(FW_BLC_SELF, fw_blc_self | FW_BLC_SELF_EN_MASK);
4586                                 }
4587                                 /* Non-busy -> busy, upclock */
4588                                 intel_increase_pllclock(crtc, true);
4589                                 intel_crtc->busy = true;
4590                         } else {
4591                                 /* Busy -> busy, put off timer */
4592                                 mod_timer(&intel_crtc->idle_timer, jiffies +
4593                                           msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
4594                         }
4595                 }
4596         }
4597 }
4598
4599 static void intel_crtc_destroy(struct drm_crtc *crtc)
4600 {
4601         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4602
4603         drm_crtc_cleanup(crtc);
4604         kfree(intel_crtc);
4605 }
4606
4607 struct intel_unpin_work {
4608         struct work_struct work;
4609         struct drm_device *dev;
4610         struct drm_gem_object *old_fb_obj;
4611         struct drm_gem_object *pending_flip_obj;
4612         struct drm_pending_vblank_event *event;
4613         int pending;
4614 };
4615
4616 static void intel_unpin_work_fn(struct work_struct *__work)
4617 {
4618         struct intel_unpin_work *work =
4619                 container_of(__work, struct intel_unpin_work, work);
4620
4621         mutex_lock(&work->dev->struct_mutex);
4622         i915_gem_object_unpin(work->old_fb_obj);
4623         drm_gem_object_unreference(work->pending_flip_obj);
4624         drm_gem_object_unreference(work->old_fb_obj);
4625         mutex_unlock(&work->dev->struct_mutex);
4626         kfree(work);
4627 }
4628
4629 static void do_intel_finish_page_flip(struct drm_device *dev,
4630                                       struct drm_crtc *crtc)
4631 {
4632         drm_i915_private_t *dev_priv = dev->dev_private;
4633         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4634         struct intel_unpin_work *work;
4635         struct drm_i915_gem_object *obj_priv;
4636         struct drm_pending_vblank_event *e;
4637         struct timeval now;
4638         unsigned long flags;
4639
4640         /* Ignore early vblank irqs */
4641         if (intel_crtc == NULL)
4642                 return;
4643
4644         spin_lock_irqsave(&dev->event_lock, flags);
4645         work = intel_crtc->unpin_work;
4646         if (work == NULL || !work->pending) {
4647                 spin_unlock_irqrestore(&dev->event_lock, flags);
4648                 return;
4649         }
4650
4651         intel_crtc->unpin_work = NULL;
4652         drm_vblank_put(dev, intel_crtc->pipe);
4653
4654         if (work->event) {
4655                 e = work->event;
4656                 do_gettimeofday(&now);
4657                 e->event.sequence = drm_vblank_count(dev, intel_crtc->pipe);
4658                 e->event.tv_sec = now.tv_sec;
4659                 e->event.tv_usec = now.tv_usec;
4660                 list_add_tail(&e->base.link,
4661                               &e->base.file_priv->event_list);
4662                 wake_up_interruptible(&e->base.file_priv->event_wait);
4663         }
4664
4665         spin_unlock_irqrestore(&dev->event_lock, flags);
4666
4667         obj_priv = to_intel_bo(work->pending_flip_obj);
4668
4669         /* Initial scanout buffer will have a 0 pending flip count */
4670         if ((atomic_read(&obj_priv->pending_flip) == 0) ||
4671             atomic_dec_and_test(&obj_priv->pending_flip))
4672                 DRM_WAKEUP(&dev_priv->pending_flip_queue);
4673         schedule_work(&work->work);
4674 }
4675
4676 void intel_finish_page_flip(struct drm_device *dev, int pipe)
4677 {
4678         drm_i915_private_t *dev_priv = dev->dev_private;
4679         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
4680
4681         do_intel_finish_page_flip(dev, crtc);
4682 }
4683
4684 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
4685 {
4686         drm_i915_private_t *dev_priv = dev->dev_private;
4687         struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
4688
4689         do_intel_finish_page_flip(dev, crtc);
4690 }
4691
4692 void intel_prepare_page_flip(struct drm_device *dev, int plane)
4693 {
4694         drm_i915_private_t *dev_priv = dev->dev_private;
4695         struct intel_crtc *intel_crtc =
4696                 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
4697         unsigned long flags;
4698
4699         spin_lock_irqsave(&dev->event_lock, flags);
4700         if (intel_crtc->unpin_work) {
4701                 intel_crtc->unpin_work->pending = 1;
4702         } else {
4703                 DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n");
4704         }
4705         spin_unlock_irqrestore(&dev->event_lock, flags);
4706 }
4707
4708 static int intel_crtc_page_flip(struct drm_crtc *crtc,
4709                                 struct drm_framebuffer *fb,
4710                                 struct drm_pending_vblank_event *event)
4711 {
4712         struct drm_device *dev = crtc->dev;
4713         struct drm_i915_private *dev_priv = dev->dev_private;
4714         struct intel_framebuffer *intel_fb;
4715         struct drm_i915_gem_object *obj_priv;
4716         struct drm_gem_object *obj;
4717         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4718         struct intel_unpin_work *work;
4719         unsigned long flags, offset;
4720         int pipesrc_reg = (intel_crtc->pipe == 0) ? PIPEASRC : PIPEBSRC;
4721         int ret, pipesrc;
4722         u32 flip_mask;
4723
4724         work = kzalloc(sizeof *work, GFP_KERNEL);
4725         if (work == NULL)
4726                 return -ENOMEM;
4727
4728         work->event = event;
4729         work->dev = crtc->dev;
4730         intel_fb = to_intel_framebuffer(crtc->fb);
4731         work->old_fb_obj = intel_fb->obj;
4732         INIT_WORK(&work->work, intel_unpin_work_fn);
4733
4734         /* We borrow the event spin lock for protecting unpin_work */
4735         spin_lock_irqsave(&dev->event_lock, flags);
4736         if (intel_crtc->unpin_work) {
4737                 spin_unlock_irqrestore(&dev->event_lock, flags);
4738                 kfree(work);
4739
4740                 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
4741                 return -EBUSY;
4742         }
4743         intel_crtc->unpin_work = work;
4744         spin_unlock_irqrestore(&dev->event_lock, flags);
4745
4746         intel_fb = to_intel_framebuffer(fb);
4747         obj = intel_fb->obj;
4748
4749         mutex_lock(&dev->struct_mutex);
4750         ret = intel_pin_and_fence_fb_obj(dev, obj);
4751         if (ret != 0) {
4752                 mutex_unlock(&dev->struct_mutex);
4753
4754                 spin_lock_irqsave(&dev->event_lock, flags);
4755                 intel_crtc->unpin_work = NULL;
4756                 spin_unlock_irqrestore(&dev->event_lock, flags);
4757
4758                 kfree(work);
4759
4760                 DRM_DEBUG_DRIVER("flip queue: %p pin & fence failed\n",
4761                                  to_intel_bo(obj));
4762                 return ret;
4763         }
4764
4765         /* Reference the objects for the scheduled work. */
4766         drm_gem_object_reference(work->old_fb_obj);
4767         drm_gem_object_reference(obj);
4768
4769         crtc->fb = fb;
4770         i915_gem_object_flush_write_domain(obj);
4771         drm_vblank_get(dev, intel_crtc->pipe);
4772         obj_priv = to_intel_bo(obj);
4773         atomic_inc(&obj_priv->pending_flip);
4774         work->pending_flip_obj = obj;
4775
4776         if (intel_crtc->plane)
4777                 flip_mask = I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
4778         else
4779                 flip_mask = I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT;
4780
4781         /* Wait for any previous flip to finish */
4782         if (IS_GEN3(dev))
4783                 while (I915_READ(ISR) & flip_mask)
4784                         ;
4785
4786         /* Offset into the new buffer for cases of shared fbs between CRTCs */
4787         offset = obj_priv->gtt_offset;
4788         offset += (crtc->y * fb->pitch) + (crtc->x * (fb->bits_per_pixel) / 8);
4789
4790         BEGIN_LP_RING(4);
4791         if (IS_I965G(dev)) {
4792                 OUT_RING(MI_DISPLAY_FLIP |
4793                          MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
4794                 OUT_RING(fb->pitch);
4795                 OUT_RING(offset | obj_priv->tiling_mode);
4796                 pipesrc = I915_READ(pipesrc_reg);
4797                 OUT_RING(pipesrc & 0x0fff0fff);
4798         } else {
4799                 OUT_RING(MI_DISPLAY_FLIP_I915 |
4800                          MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
4801                 OUT_RING(fb->pitch);
4802                 OUT_RING(offset);
4803                 OUT_RING(MI_NOOP);
4804         }
4805         ADVANCE_LP_RING();
4806
4807         mutex_unlock(&dev->struct_mutex);
4808
4809         return 0;
4810 }
4811
4812 static const struct drm_crtc_helper_funcs intel_helper_funcs = {
4813         .dpms = intel_crtc_dpms,
4814         .mode_fixup = intel_crtc_mode_fixup,
4815         .mode_set = intel_crtc_mode_set,
4816         .mode_set_base = intel_pipe_set_base,
4817         .prepare = intel_crtc_prepare,
4818         .commit = intel_crtc_commit,
4819         .load_lut = intel_crtc_load_lut,
4820 };
4821
4822 static const struct drm_crtc_funcs intel_crtc_funcs = {
4823         .cursor_set = intel_crtc_cursor_set,
4824         .cursor_move = intel_crtc_cursor_move,
4825         .gamma_set = intel_crtc_gamma_set,
4826         .set_config = drm_crtc_helper_set_config,
4827         .destroy = intel_crtc_destroy,
4828         .page_flip = intel_crtc_page_flip,
4829 };
4830
4831
4832 static void intel_crtc_init(struct drm_device *dev, int pipe)
4833 {
4834         drm_i915_private_t *dev_priv = dev->dev_private;
4835         struct intel_crtc *intel_crtc;
4836         int i;
4837
4838         intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
4839         if (intel_crtc == NULL)
4840                 return;
4841
4842         drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
4843
4844         drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
4845         intel_crtc->pipe = pipe;
4846         intel_crtc->plane = pipe;
4847         for (i = 0; i < 256; i++) {
4848                 intel_crtc->lut_r[i] = i;
4849                 intel_crtc->lut_g[i] = i;
4850                 intel_crtc->lut_b[i] = i;
4851         }
4852
4853         /* Swap pipes & planes for FBC on pre-965 */
4854         intel_crtc->pipe = pipe;
4855         intel_crtc->plane = pipe;
4856         if (IS_MOBILE(dev) && (IS_I9XX(dev) && !IS_I965G(dev))) {
4857                 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
4858                 intel_crtc->plane = ((pipe == 0) ? 1 : 0);
4859         }
4860
4861         BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
4862                dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
4863         dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
4864         dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
4865
4866         intel_crtc->cursor_addr = 0;
4867         intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF;
4868         drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
4869
4870         intel_crtc->busy = false;
4871
4872         setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
4873                     (unsigned long)intel_crtc);
4874 }
4875
4876 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
4877                                 struct drm_file *file_priv)
4878 {
4879         drm_i915_private_t *dev_priv = dev->dev_private;
4880         struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
4881         struct drm_mode_object *drmmode_obj;
4882         struct intel_crtc *crtc;
4883
4884         if (!dev_priv) {
4885                 DRM_ERROR("called with no initialization\n");
4886                 return -EINVAL;
4887         }
4888
4889         drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
4890                         DRM_MODE_OBJECT_CRTC);
4891
4892         if (!drmmode_obj) {
4893                 DRM_ERROR("no such CRTC id\n");
4894                 return -EINVAL;
4895         }
4896
4897         crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
4898         pipe_from_crtc_id->pipe = crtc->pipe;
4899
4900         return 0;
4901 }
4902
4903 struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
4904 {
4905         struct drm_crtc *crtc = NULL;
4906
4907         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
4908                 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4909                 if (intel_crtc->pipe == pipe)
4910                         break;
4911         }
4912         return crtc;
4913 }
4914
4915 static int intel_encoder_clones(struct drm_device *dev, int type_mask)
4916 {
4917         int index_mask = 0;
4918         struct drm_encoder *encoder;
4919         int entry = 0;
4920
4921         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
4922                 struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
4923                 if (type_mask & intel_encoder->clone_mask)
4924                         index_mask |= (1 << entry);
4925                 entry++;
4926         }
4927         return index_mask;
4928 }
4929
4930
4931 static void intel_setup_outputs(struct drm_device *dev)
4932 {
4933         struct drm_i915_private *dev_priv = dev->dev_private;
4934         struct drm_encoder *encoder;
4935
4936         intel_crt_init(dev);
4937
4938         /* Set up integrated LVDS */
4939         if (IS_MOBILE(dev) && !IS_I830(dev))
4940                 intel_lvds_init(dev);
4941
4942         if (HAS_PCH_SPLIT(dev)) {
4943                 int found;
4944
4945                 if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED))
4946                         intel_dp_init(dev, DP_A);
4947
4948                 if (I915_READ(HDMIB) & PORT_DETECTED) {
4949                         /* PCH SDVOB multiplex with HDMIB */
4950                         found = intel_sdvo_init(dev, PCH_SDVOB);
4951                         if (!found)
4952                                 intel_hdmi_init(dev, HDMIB);
4953                         if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
4954                                 intel_dp_init(dev, PCH_DP_B);
4955                 }
4956
4957                 if (I915_READ(HDMIC) & PORT_DETECTED)
4958                         intel_hdmi_init(dev, HDMIC);
4959
4960                 if (I915_READ(HDMID) & PORT_DETECTED)
4961                         intel_hdmi_init(dev, HDMID);
4962
4963                 if (I915_READ(PCH_DP_C) & DP_DETECTED)
4964                         intel_dp_init(dev, PCH_DP_C);
4965
4966                 if (I915_READ(PCH_DP_D) & DP_DETECTED)
4967                         intel_dp_init(dev, PCH_DP_D);
4968
4969         } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
4970                 bool found = false;
4971
4972                 if (I915_READ(SDVOB) & SDVO_DETECTED) {
4973                         DRM_DEBUG_KMS("probing SDVOB\n");
4974                         found = intel_sdvo_init(dev, SDVOB);
4975                         if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
4976                                 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
4977                                 intel_hdmi_init(dev, SDVOB);
4978                         }
4979
4980                         if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
4981                                 DRM_DEBUG_KMS("probing DP_B\n");
4982                                 intel_dp_init(dev, DP_B);
4983                         }
4984                 }
4985
4986                 /* Before G4X SDVOC doesn't have its own detect register */
4987
4988                 if (I915_READ(SDVOB) & SDVO_DETECTED) {
4989                         DRM_DEBUG_KMS("probing SDVOC\n");
4990                         found = intel_sdvo_init(dev, SDVOC);
4991                 }
4992
4993                 if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
4994
4995                         if (SUPPORTS_INTEGRATED_HDMI(dev)) {
4996                                 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
4997                                 intel_hdmi_init(dev, SDVOC);
4998                         }
4999                         if (SUPPORTS_INTEGRATED_DP(dev)) {
5000                                 DRM_DEBUG_KMS("probing DP_C\n");
5001                                 intel_dp_init(dev, DP_C);
5002                         }
5003                 }
5004
5005                 if (SUPPORTS_INTEGRATED_DP(dev) &&
5006                     (I915_READ(DP_D) & DP_DETECTED)) {
5007                         DRM_DEBUG_KMS("probing DP_D\n");
5008                         intel_dp_init(dev, DP_D);
5009                 }
5010         } else if (IS_GEN2(dev))
5011                 intel_dvo_init(dev);
5012
5013         if (SUPPORTS_TV(dev))
5014                 intel_tv_init(dev);
5015
5016         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
5017                 struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
5018
5019                 encoder->possible_crtcs = intel_encoder->crtc_mask;
5020                 encoder->possible_clones = intel_encoder_clones(dev,
5021                                                 intel_encoder->clone_mask);
5022         }
5023 }
5024
5025 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
5026 {
5027         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
5028
5029         drm_framebuffer_cleanup(fb);
5030         drm_gem_object_unreference_unlocked(intel_fb->obj);
5031
5032         kfree(intel_fb);
5033 }
5034
5035 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
5036                                                 struct drm_file *file_priv,
5037                                                 unsigned int *handle)
5038 {
5039         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
5040         struct drm_gem_object *object = intel_fb->obj;
5041
5042         return drm_gem_handle_create(file_priv, object, handle);
5043 }
5044
5045 static const struct drm_framebuffer_funcs intel_fb_funcs = {
5046         .destroy = intel_user_framebuffer_destroy,
5047         .create_handle = intel_user_framebuffer_create_handle,
5048 };
5049
5050 int intel_framebuffer_init(struct drm_device *dev,
5051                            struct intel_framebuffer *intel_fb,
5052                            struct drm_mode_fb_cmd *mode_cmd,
5053                            struct drm_gem_object *obj)
5054 {
5055         int ret;
5056
5057         ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
5058         if (ret) {
5059                 DRM_ERROR("framebuffer init failed %d\n", ret);
5060                 return ret;
5061         }
5062
5063         drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
5064         intel_fb->obj = obj;
5065         return 0;
5066 }
5067
5068 static struct drm_framebuffer *
5069 intel_user_framebuffer_create(struct drm_device *dev,
5070                               struct drm_file *filp,
5071                               struct drm_mode_fb_cmd *mode_cmd)
5072 {
5073         struct drm_gem_object *obj;
5074         struct intel_framebuffer *intel_fb;
5075         int ret;
5076
5077         obj = drm_gem_object_lookup(dev, filp, mode_cmd->handle);
5078         if (!obj)
5079                 return NULL;
5080
5081         intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
5082         if (!intel_fb)
5083                 return NULL;
5084
5085         ret = intel_framebuffer_init(dev, intel_fb,
5086                                      mode_cmd, obj);
5087         if (ret) {
5088                 drm_gem_object_unreference_unlocked(obj);
5089                 kfree(intel_fb);
5090                 return NULL;
5091         }
5092
5093         return &intel_fb->base;
5094 }
5095
5096 static const struct drm_mode_config_funcs intel_mode_funcs = {
5097         .fb_create = intel_user_framebuffer_create,
5098         .output_poll_changed = intel_fb_output_poll_changed,
5099 };
5100
5101 static struct drm_gem_object *
5102 intel_alloc_power_context(struct drm_device *dev)
5103 {
5104         struct drm_gem_object *pwrctx;
5105         int ret;
5106
5107         pwrctx = i915_gem_alloc_object(dev, 4096);
5108         if (!pwrctx) {
5109                 DRM_DEBUG("failed to alloc power context, RC6 disabled\n");
5110                 return NULL;
5111         }
5112
5113         mutex_lock(&dev->struct_mutex);
5114         ret = i915_gem_object_pin(pwrctx, 4096);
5115         if (ret) {
5116                 DRM_ERROR("failed to pin power context: %d\n", ret);
5117                 goto err_unref;
5118         }
5119
5120         ret = i915_gem_object_set_to_gtt_domain(pwrctx, 1);
5121         if (ret) {
5122                 DRM_ERROR("failed to set-domain on power context: %d\n", ret);
5123                 goto err_unpin;
5124         }
5125         mutex_unlock(&dev->struct_mutex);
5126
5127         return pwrctx;
5128
5129 err_unpin:
5130         i915_gem_object_unpin(pwrctx);
5131 err_unref:
5132         drm_gem_object_unreference(pwrctx);
5133         mutex_unlock(&dev->struct_mutex);
5134         return NULL;
5135 }
5136
5137 bool ironlake_set_drps(struct drm_device *dev, u8 val)
5138 {
5139         struct drm_i915_private *dev_priv = dev->dev_private;
5140         u16 rgvswctl;
5141
5142         rgvswctl = I915_READ16(MEMSWCTL);
5143         if (rgvswctl & MEMCTL_CMD_STS) {
5144                 DRM_DEBUG("gpu busy, RCS change rejected\n");
5145                 return false; /* still busy with another command */
5146         }
5147
5148         rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
5149                 (val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
5150         I915_WRITE16(MEMSWCTL, rgvswctl);
5151         POSTING_READ16(MEMSWCTL);
5152
5153         rgvswctl |= MEMCTL_CMD_STS;
5154         I915_WRITE16(MEMSWCTL, rgvswctl);
5155
5156         return true;
5157 }
5158
5159 void ironlake_enable_drps(struct drm_device *dev)
5160 {
5161         struct drm_i915_private *dev_priv = dev->dev_private;
5162         u32 rgvmodectl = I915_READ(MEMMODECTL);
5163         u8 fmax, fmin, fstart, vstart;
5164         int i = 0;
5165
5166         /* 100ms RC evaluation intervals */
5167         I915_WRITE(RCUPEI, 100000);
5168         I915_WRITE(RCDNEI, 100000);
5169
5170         /* Set max/min thresholds to 90ms and 80ms respectively */
5171         I915_WRITE(RCBMAXAVG, 90000);
5172         I915_WRITE(RCBMINAVG, 80000);
5173
5174         I915_WRITE(MEMIHYST, 1);
5175
5176         /* Set up min, max, and cur for interrupt handling */
5177         fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT;
5178         fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
5179         fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
5180                 MEMMODE_FSTART_SHIFT;
5181         fstart = fmax;
5182
5183         vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
5184                 PXVFREQ_PX_SHIFT;
5185
5186         dev_priv->fmax = fstart; /* IPS callback will increase this */
5187         dev_priv->fstart = fstart;
5188
5189         dev_priv->max_delay = fmax;
5190         dev_priv->min_delay = fmin;
5191         dev_priv->cur_delay = fstart;
5192
5193         DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", fmax, fmin,
5194                          fstart);
5195
5196         I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
5197
5198         /*
5199          * Interrupts will be enabled in ironlake_irq_postinstall
5200          */
5201
5202         I915_WRITE(VIDSTART, vstart);
5203         POSTING_READ(VIDSTART);
5204
5205         rgvmodectl |= MEMMODE_SWMODE_EN;
5206         I915_WRITE(MEMMODECTL, rgvmodectl);
5207
5208         while (I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) {
5209                 if (i++ > 100) {
5210                         DRM_ERROR("stuck trying to change perf mode\n");
5211                         break;
5212                 }
5213                 msleep(1);
5214         }
5215         msleep(1);
5216
5217         ironlake_set_drps(dev, fstart);
5218
5219         dev_priv->last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) +
5220                 I915_READ(0x112e0);
5221         dev_priv->last_time1 = jiffies_to_msecs(jiffies);
5222         dev_priv->last_count2 = I915_READ(0x112f4);
5223         getrawmonotonic(&dev_priv->last_time2);
5224 }
5225
5226 void ironlake_disable_drps(struct drm_device *dev)
5227 {
5228         struct drm_i915_private *dev_priv = dev->dev_private;
5229         u16 rgvswctl = I915_READ16(MEMSWCTL);
5230
5231         /* Ack interrupts, disable EFC interrupt */
5232         I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
5233         I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG);
5234         I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT);
5235         I915_WRITE(DEIIR, DE_PCU_EVENT);
5236         I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT);
5237
5238         /* Go back to the starting frequency */
5239         ironlake_set_drps(dev, dev_priv->fstart);
5240         msleep(1);
5241         rgvswctl |= MEMCTL_CMD_STS;
5242         I915_WRITE(MEMSWCTL, rgvswctl);
5243         msleep(1);
5244
5245 }
5246
5247 static unsigned long intel_pxfreq(u32 vidfreq)
5248 {
5249         unsigned long freq;
5250         int div = (vidfreq & 0x3f0000) >> 16;
5251         int post = (vidfreq & 0x3000) >> 12;
5252         int pre = (vidfreq & 0x7);
5253
5254         if (!pre)
5255                 return 0;
5256
5257         freq = ((div * 133333) / ((1<<post) * pre));
5258
5259         return freq;
5260 }
5261
5262 void intel_init_emon(struct drm_device *dev)
5263 {
5264         struct drm_i915_private *dev_priv = dev->dev_private;
5265         u32 lcfuse;
5266         u8 pxw[16];
5267         int i;
5268
5269         /* Disable to program */
5270         I915_WRITE(ECR, 0);
5271         POSTING_READ(ECR);
5272
5273         /* Program energy weights for various events */
5274         I915_WRITE(SDEW, 0x15040d00);
5275         I915_WRITE(CSIEW0, 0x007f0000);
5276         I915_WRITE(CSIEW1, 0x1e220004);
5277         I915_WRITE(CSIEW2, 0x04000004);
5278
5279         for (i = 0; i < 5; i++)
5280                 I915_WRITE(PEW + (i * 4), 0);
5281         for (i = 0; i < 3; i++)
5282                 I915_WRITE(DEW + (i * 4), 0);
5283
5284         /* Program P-state weights to account for frequency power adjustment */
5285         for (i = 0; i < 16; i++) {
5286                 u32 pxvidfreq = I915_READ(PXVFREQ_BASE + (i * 4));
5287                 unsigned long freq = intel_pxfreq(pxvidfreq);
5288                 unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >>
5289                         PXVFREQ_PX_SHIFT;
5290                 unsigned long val;
5291
5292                 val = vid * vid;
5293                 val *= (freq / 1000);
5294                 val *= 255;
5295                 val /= (127*127*900);
5296                 if (val > 0xff)
5297                         DRM_ERROR("bad pxval: %ld\n", val);
5298                 pxw[i] = val;
5299         }
5300         /* Render standby states get 0 weight */
5301         pxw[14] = 0;
5302         pxw[15] = 0;
5303
5304         for (i = 0; i < 4; i++) {
5305                 u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) |
5306                         (pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]);
5307                 I915_WRITE(PXW + (i * 4), val);
5308         }
5309
5310         /* Adjust magic regs to magic values (more experimental results) */
5311         I915_WRITE(OGW0, 0);
5312         I915_WRITE(OGW1, 0);
5313         I915_WRITE(EG0, 0x00007f00);
5314         I915_WRITE(EG1, 0x0000000e);
5315         I915_WRITE(EG2, 0x000e0000);
5316         I915_WRITE(EG3, 0x68000300);
5317         I915_WRITE(EG4, 0x42000000);
5318         I915_WRITE(EG5, 0x00140031);
5319         I915_WRITE(EG6, 0);
5320         I915_WRITE(EG7, 0);
5321
5322         for (i = 0; i < 8; i++)
5323                 I915_WRITE(PXWL + (i * 4), 0);
5324
5325         /* Enable PMON + select events */
5326         I915_WRITE(ECR, 0x80000019);
5327
5328         lcfuse = I915_READ(LCFUSE02);
5329
5330         dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK);
5331 }
5332
5333 void intel_init_clock_gating(struct drm_device *dev)
5334 {
5335         struct drm_i915_private *dev_priv = dev->dev_private;
5336
5337         /*
5338          * Disable clock gating reported to work incorrectly according to the
5339          * specs, but enable as much else as we can.
5340          */
5341         if (HAS_PCH_SPLIT(dev)) {
5342                 uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
5343
5344                 if (IS_IRONLAKE(dev)) {
5345                         /* Required for FBC */
5346                         dspclk_gate |= DPFDUNIT_CLOCK_GATE_DISABLE;
5347                         /* Required for CxSR */
5348                         dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE;
5349
5350                         I915_WRITE(PCH_3DCGDIS0,
5351                                    MARIUNIT_CLOCK_GATE_DISABLE |
5352                                    SVSMUNIT_CLOCK_GATE_DISABLE);
5353                 }
5354
5355                 I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
5356
5357                 /*
5358                  * According to the spec the following bits should be set in
5359                  * order to enable memory self-refresh
5360                  * The bit 22/21 of 0x42004
5361                  * The bit 5 of 0x42020
5362                  * The bit 15 of 0x45000
5363                  */
5364                 if (IS_IRONLAKE(dev)) {
5365                         I915_WRITE(ILK_DISPLAY_CHICKEN2,
5366                                         (I915_READ(ILK_DISPLAY_CHICKEN2) |
5367                                         ILK_DPARB_GATE | ILK_VSDPFD_FULL));
5368                         I915_WRITE(ILK_DSPCLK_GATE,
5369                                         (I915_READ(ILK_DSPCLK_GATE) |
5370                                                 ILK_DPARB_CLK_GATE));
5371                         I915_WRITE(DISP_ARB_CTL,
5372                                         (I915_READ(DISP_ARB_CTL) |
5373                                                 DISP_FBC_WM_DIS));
5374                 }
5375                 return;
5376         } else if (IS_G4X(dev)) {
5377                 uint32_t dspclk_gate;
5378                 I915_WRITE(RENCLK_GATE_D1, 0);
5379                 I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
5380                        GS_UNIT_CLOCK_GATE_DISABLE |
5381                        CL_UNIT_CLOCK_GATE_DISABLE);
5382                 I915_WRITE(RAMCLK_GATE_D, 0);
5383                 dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
5384                         OVRUNIT_CLOCK_GATE_DISABLE |
5385                         OVCUNIT_CLOCK_GATE_DISABLE;
5386                 if (IS_GM45(dev))
5387                         dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
5388                 I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
5389         } else if (IS_I965GM(dev)) {
5390                 I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
5391                 I915_WRITE(RENCLK_GATE_D2, 0);
5392                 I915_WRITE(DSPCLK_GATE_D, 0);
5393                 I915_WRITE(RAMCLK_GATE_D, 0);
5394                 I915_WRITE16(DEUC, 0);
5395         } else if (IS_I965G(dev)) {
5396                 I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
5397                        I965_RCC_CLOCK_GATE_DISABLE |
5398                        I965_RCPB_CLOCK_GATE_DISABLE |
5399                        I965_ISC_CLOCK_GATE_DISABLE |
5400                        I965_FBC_CLOCK_GATE_DISABLE);
5401                 I915_WRITE(RENCLK_GATE_D2, 0);
5402         } else if (IS_I9XX(dev)) {
5403                 u32 dstate = I915_READ(D_STATE);
5404
5405                 dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
5406                         DSTATE_DOT_CLOCK_GATING;
5407                 I915_WRITE(D_STATE, dstate);
5408         } else if (IS_I85X(dev) || IS_I865G(dev)) {
5409                 I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
5410         } else if (IS_I830(dev)) {
5411                 I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
5412         }
5413
5414         /*
5415          * GPU can automatically power down the render unit if given a page
5416          * to save state.
5417          */
5418         if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) {
5419                 struct drm_i915_gem_object *obj_priv = NULL;
5420
5421                 if (dev_priv->pwrctx) {
5422                         obj_priv = to_intel_bo(dev_priv->pwrctx);
5423                 } else {
5424                         struct drm_gem_object *pwrctx;
5425
5426                         pwrctx = intel_alloc_power_context(dev);
5427                         if (pwrctx) {
5428                                 dev_priv->pwrctx = pwrctx;
5429                                 obj_priv = to_intel_bo(pwrctx);
5430                         }
5431                 }
5432
5433                 if (obj_priv) {
5434                         I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN);
5435                         I915_WRITE(MCHBAR_RENDER_STANDBY,
5436                                    I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT);
5437                 }
5438         }
5439 }
5440
5441 /* Set up chip specific display functions */
5442 static void intel_init_display(struct drm_device *dev)
5443 {
5444         struct drm_i915_private *dev_priv = dev->dev_private;
5445
5446         /* We always want a DPMS function */
5447         if (HAS_PCH_SPLIT(dev))
5448                 dev_priv->display.dpms = ironlake_crtc_dpms;
5449         else
5450                 dev_priv->display.dpms = i9xx_crtc_dpms;
5451
5452         if (I915_HAS_FBC(dev)) {
5453                 if (IS_GM45(dev)) {
5454                         dev_priv->display.fbc_enabled = g4x_fbc_enabled;
5455                         dev_priv->display.enable_fbc = g4x_enable_fbc;
5456                         dev_priv->display.disable_fbc = g4x_disable_fbc;
5457                 } else if (IS_I965GM(dev)) {
5458                         dev_priv->display.fbc_enabled = i8xx_fbc_enabled;
5459                         dev_priv->display.enable_fbc = i8xx_enable_fbc;
5460                         dev_priv->display.disable_fbc = i8xx_disable_fbc;
5461                 }
5462                 /* 855GM needs testing */
5463         }
5464
5465         /* Returns the core display clock speed */
5466         if (IS_I945G(dev) || (IS_G33(dev) && ! IS_PINEVIEW_M(dev)))
5467                 dev_priv->display.get_display_clock_speed =
5468                         i945_get_display_clock_speed;
5469         else if (IS_I915G(dev))
5470                 dev_priv->display.get_display_clock_speed =
5471                         i915_get_display_clock_speed;
5472         else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev))
5473                 dev_priv->display.get_display_clock_speed =
5474                         i9xx_misc_get_display_clock_speed;
5475         else if (IS_I915GM(dev))
5476                 dev_priv->display.get_display_clock_speed =
5477                         i915gm_get_display_clock_speed;
5478         else if (IS_I865G(dev))
5479                 dev_priv->display.get_display_clock_speed =
5480                         i865_get_display_clock_speed;
5481         else if (IS_I85X(dev))
5482                 dev_priv->display.get_display_clock_speed =
5483                         i855_get_display_clock_speed;
5484         else /* 852, 830 */
5485                 dev_priv->display.get_display_clock_speed =
5486                         i830_get_display_clock_speed;
5487
5488         /* For FIFO watermark updates */
5489         if (HAS_PCH_SPLIT(dev)) {
5490                 if (IS_IRONLAKE(dev)) {
5491                         if (I915_READ(MLTR_ILK) & ILK_SRLT_MASK)
5492                                 dev_priv->display.update_wm = ironlake_update_wm;
5493                         else {
5494                                 DRM_DEBUG_KMS("Failed to get proper latency. "
5495                                               "Disable CxSR\n");
5496                                 dev_priv->display.update_wm = NULL;
5497                         }
5498                 } else
5499                         dev_priv->display.update_wm = NULL;
5500         } else if (IS_PINEVIEW(dev)) {
5501                 if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev),
5502                                             dev_priv->is_ddr3,
5503                                             dev_priv->fsb_freq,
5504                                             dev_priv->mem_freq)) {
5505                         DRM_INFO("failed to find known CxSR latency "
5506                                  "(found ddr%s fsb freq %d, mem freq %d), "
5507                                  "disabling CxSR\n",
5508                                  (dev_priv->is_ddr3 == 1) ? "3": "2",
5509                                  dev_priv->fsb_freq, dev_priv->mem_freq);
5510                         /* Disable CxSR and never update its watermark again */
5511                         pineview_disable_cxsr(dev);
5512                         dev_priv->display.update_wm = NULL;
5513                 } else
5514                         dev_priv->display.update_wm = pineview_update_wm;
5515         } else if (IS_G4X(dev))
5516                 dev_priv->display.update_wm = g4x_update_wm;
5517         else if (IS_I965G(dev))
5518                 dev_priv->display.update_wm = i965_update_wm;
5519         else if (IS_I9XX(dev)) {
5520                 dev_priv->display.update_wm = i9xx_update_wm;
5521                 dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
5522         } else if (IS_I85X(dev)) {
5523                 dev_priv->display.update_wm = i9xx_update_wm;
5524                 dev_priv->display.get_fifo_size = i85x_get_fifo_size;
5525         } else {
5526                 dev_priv->display.update_wm = i830_update_wm;
5527                 if (IS_845G(dev))
5528                         dev_priv->display.get_fifo_size = i845_get_fifo_size;
5529                 else
5530                         dev_priv->display.get_fifo_size = i830_get_fifo_size;
5531         }
5532 }
5533
5534 /*
5535  * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
5536  * resume, or other times.  This quirk makes sure that's the case for
5537  * affected systems.
5538  */
5539 static void quirk_pipea_force (struct drm_device *dev)
5540 {
5541         struct drm_i915_private *dev_priv = dev->dev_private;
5542
5543         dev_priv->quirks |= QUIRK_PIPEA_FORCE;
5544         DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
5545 }
5546
5547 struct intel_quirk {
5548         int device;
5549         int subsystem_vendor;
5550         int subsystem_device;
5551         void (*hook)(struct drm_device *dev);
5552 };
5553
5554 struct intel_quirk intel_quirks[] = {
5555         /* HP Compaq 2730p needs pipe A force quirk (LP: #291555) */
5556         { 0x2a42, 0x103c, 0x30eb, quirk_pipea_force },
5557         /* HP Mini needs pipe A force quirk (LP: #322104) */
5558         { 0x27ae,0x103c, 0x361a, quirk_pipea_force },
5559
5560         /* Thinkpad R31 needs pipe A force quirk */
5561         { 0x3577, 0x1014, 0x0505, quirk_pipea_force },
5562         /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
5563         { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
5564
5565         /* ThinkPad X30 needs pipe A force quirk (LP: #304614) */
5566         { 0x3577,  0x1014, 0x0513, quirk_pipea_force },
5567         /* ThinkPad X40 needs pipe A force quirk */
5568
5569         /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
5570         { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
5571
5572         /* 855 & before need to leave pipe A & dpll A up */
5573         { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
5574         { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
5575 };
5576
5577 static void intel_init_quirks(struct drm_device *dev)
5578 {
5579         struct pci_dev *d = dev->pdev;
5580         int i;
5581
5582         for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
5583                 struct intel_quirk *q = &intel_quirks[i];
5584
5585                 if (d->device == q->device &&
5586                     (d->subsystem_vendor == q->subsystem_vendor ||
5587                      q->subsystem_vendor == PCI_ANY_ID) &&
5588                     (d->subsystem_device == q->subsystem_device ||
5589                      q->subsystem_device == PCI_ANY_ID))
5590                         q->hook(dev);
5591         }
5592 }
5593
5594 void intel_modeset_init(struct drm_device *dev)
5595 {
5596         struct drm_i915_private *dev_priv = dev->dev_private;
5597         int i;
5598
5599         drm_mode_config_init(dev);
5600
5601         dev->mode_config.min_width = 0;
5602         dev->mode_config.min_height = 0;
5603
5604         dev->mode_config.funcs = (void *)&intel_mode_funcs;
5605
5606         intel_init_quirks(dev);
5607
5608         intel_init_display(dev);
5609
5610         if (IS_I965G(dev)) {
5611                 dev->mode_config.max_width = 8192;
5612                 dev->mode_config.max_height = 8192;
5613         } else if (IS_I9XX(dev)) {
5614                 dev->mode_config.max_width = 4096;
5615                 dev->mode_config.max_height = 4096;
5616         } else {
5617                 dev->mode_config.max_width = 2048;
5618                 dev->mode_config.max_height = 2048;
5619         }
5620
5621         /* set memory base */
5622         if (IS_I9XX(dev))
5623                 dev->mode_config.fb_base = pci_resource_start(dev->pdev, 2);
5624         else
5625                 dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0);
5626
5627         if (IS_MOBILE(dev) || IS_I9XX(dev))
5628                 dev_priv->num_pipe = 2;
5629         else
5630                 dev_priv->num_pipe = 1;
5631         DRM_DEBUG_KMS("%d display pipe%s available.\n",
5632                       dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");
5633
5634         for (i = 0; i < dev_priv->num_pipe; i++) {
5635                 intel_crtc_init(dev, i);
5636         }
5637
5638         intel_setup_outputs(dev);
5639
5640         intel_init_clock_gating(dev);
5641
5642         if (IS_IRONLAKE_M(dev)) {
5643                 ironlake_enable_drps(dev);
5644                 intel_init_emon(dev);
5645         }
5646
5647         INIT_WORK(&dev_priv->idle_work, intel_idle_update);
5648         setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
5649                     (unsigned long)dev);
5650
5651         intel_setup_overlay(dev);
5652 }
5653
5654 void intel_modeset_cleanup(struct drm_device *dev)
5655 {
5656         struct drm_i915_private *dev_priv = dev->dev_private;
5657         struct drm_crtc *crtc;
5658         struct intel_crtc *intel_crtc;
5659
5660         mutex_lock(&dev->struct_mutex);
5661
5662         drm_kms_helper_poll_fini(dev);
5663         intel_fbdev_fini(dev);
5664
5665         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
5666                 /* Skip inactive CRTCs */
5667                 if (!crtc->fb)
5668                         continue;
5669
5670                 intel_crtc = to_intel_crtc(crtc);
5671                 intel_increase_pllclock(crtc, false);
5672                 del_timer_sync(&intel_crtc->idle_timer);
5673         }
5674
5675         del_timer_sync(&dev_priv->idle_timer);
5676
5677         if (dev_priv->display.disable_fbc)
5678                 dev_priv->display.disable_fbc(dev);
5679
5680         if (dev_priv->pwrctx) {
5681                 struct drm_i915_gem_object *obj_priv;
5682
5683                 obj_priv = to_intel_bo(dev_priv->pwrctx);
5684                 I915_WRITE(PWRCTXA, obj_priv->gtt_offset &~ PWRCTX_EN);
5685                 I915_READ(PWRCTXA);
5686                 i915_gem_object_unpin(dev_priv->pwrctx);
5687                 drm_gem_object_unreference(dev_priv->pwrctx);
5688         }
5689
5690         if (IS_IRONLAKE_M(dev))
5691                 ironlake_disable_drps(dev);
5692
5693         mutex_unlock(&dev->struct_mutex);
5694
5695         drm_mode_config_cleanup(dev);
5696 }
5697
5698
5699 /*
5700  * Return which encoder is currently attached for connector.
5701  */
5702 struct drm_encoder *intel_attached_encoder (struct drm_connector *connector)
5703 {
5704         struct drm_mode_object *obj;
5705         struct drm_encoder *encoder;
5706         int i;
5707
5708         for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
5709                 if (connector->encoder_ids[i] == 0)
5710                         break;
5711
5712                 obj = drm_mode_object_find(connector->dev,
5713                                            connector->encoder_ids[i],
5714                                            DRM_MODE_OBJECT_ENCODER);
5715                 if (!obj)
5716                         continue;
5717
5718                 encoder = obj_to_encoder(obj);
5719                 return encoder;
5720         }
5721         return NULL;
5722 }
5723
5724 /*
5725  * set vga decode state - true == enable VGA decode
5726  */
5727 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
5728 {
5729         struct drm_i915_private *dev_priv = dev->dev_private;
5730         u16 gmch_ctrl;
5731
5732         pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &gmch_ctrl);
5733         if (state)
5734                 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
5735         else
5736                 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
5737         pci_write_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl);
5738         return 0;
5739 }