treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
[sfrench/cifs-2.6.git] / drivers / char / ppdev.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * linux/drivers/char/ppdev.c
4  *
5  * This is the code behind /dev/parport* -- it allows a user-space
6  * application to use the parport subsystem.
7  *
8  * Copyright (C) 1998-2000, 2002 Tim Waugh <tim@cyberelk.net>
9  *
10  * A /dev/parportx device node represents an arbitrary device
11  * on port 'x'.  The following operations are possible:
12  *
13  * open         do nothing, set up default IEEE 1284 protocol to be COMPAT
14  * close        release port and unregister device (if necessary)
15  * ioctl
16  *   EXCL       register device exclusively (may fail)
17  *   CLAIM      (register device first time) parport_claim_or_block
18  *   RELEASE    parport_release
19  *   SETMODE    set the IEEE 1284 protocol to use for read/write
20  *   SETPHASE   set the IEEE 1284 phase of a particular mode.  Not to be
21  *              confused with ioctl(fd, SETPHASER, &stun). ;-)
22  *   DATADIR    data_forward / data_reverse
23  *   WDATA      write_data
24  *   RDATA      read_data
25  *   WCONTROL   write_control
26  *   RCONTROL   read_control
27  *   FCONTROL   frob_control
28  *   RSTATUS    read_status
29  *   NEGOT      parport_negotiate
30  *   YIELD      parport_yield_blocking
31  *   WCTLONIRQ  on interrupt, set control lines
32  *   CLRIRQ     clear (and return) interrupt count
33  *   SETTIME    sets device timeout (struct timeval)
34  *   GETTIME    gets device timeout (struct timeval)
35  *   GETMODES   gets hardware supported modes (unsigned int)
36  *   GETMODE    gets the current IEEE1284 mode
37  *   GETPHASE   gets the current IEEE1284 phase
38  *   GETFLAGS   gets current (user-visible) flags
39  *   SETFLAGS   sets current (user-visible) flags
40  * read/write   read or write in current IEEE 1284 protocol
41  * select       wait for interrupt (in readfds)
42  *
43  * Changes:
44  * Added SETTIME/GETTIME ioctl, Fred Barnes, 1999.
45  *
46  * Arnaldo Carvalho de Melo <acme@conectiva.com.br> 2000/08/25
47  * - On error, copy_from_user and copy_to_user do not return -EFAULT,
48  *   They return the positive number of bytes *not* copied due to address
49  *   space errors.
50  *
51  * Added GETMODES/GETMODE/GETPHASE ioctls, Fred Barnes <frmb2@ukc.ac.uk>, 03/01/2001.
52  * Added GETFLAGS/SETFLAGS ioctls, Fred Barnes, 04/2001
53  */
54
55 #include <linux/module.h>
56 #include <linux/init.h>
57 #include <linux/sched/signal.h>
58 #include <linux/device.h>
59 #include <linux/ioctl.h>
60 #include <linux/parport.h>
61 #include <linux/ctype.h>
62 #include <linux/poll.h>
63 #include <linux/slab.h>
64 #include <linux/major.h>
65 #include <linux/ppdev.h>
66 #include <linux/mutex.h>
67 #include <linux/uaccess.h>
68 #include <linux/compat.h>
69
70 #define PP_VERSION "ppdev: user-space parallel port driver"
71 #define CHRDEV "ppdev"
72
73 struct pp_struct {
74         struct pardevice *pdev;
75         wait_queue_head_t irq_wait;
76         atomic_t irqc;
77         unsigned int flags;
78         int irqresponse;
79         unsigned char irqctl;
80         struct ieee1284_info state;
81         struct ieee1284_info saved_state;
82         long default_inactivity;
83         int index;
84 };
85
86 /* should we use PARDEVICE_MAX here? */
87 static struct device *devices[PARPORT_MAX];
88
89 static DEFINE_IDA(ida_index);
90
91 /* pp_struct.flags bitfields */
92 #define PP_CLAIMED    (1<<0)
93 #define PP_EXCL       (1<<1)
94
95 /* Other constants */
96 #define PP_INTERRUPT_TIMEOUT (10 * HZ) /* 10s */
97 #define PP_BUFFER_SIZE 1024
98 #define PARDEVICE_MAX 8
99
100 static DEFINE_MUTEX(pp_do_mutex);
101
102 /* define fixed sized ioctl cmd for y2038 migration */
103 #define PPGETTIME32     _IOR(PP_IOCTL, 0x95, s32[2])
104 #define PPSETTIME32     _IOW(PP_IOCTL, 0x96, s32[2])
105 #define PPGETTIME64     _IOR(PP_IOCTL, 0x95, s64[2])
106 #define PPSETTIME64     _IOW(PP_IOCTL, 0x96, s64[2])
107
108 static inline void pp_enable_irq(struct pp_struct *pp)
109 {
110         struct parport *port = pp->pdev->port;
111
112         port->ops->enable_irq(port);
113 }
114
115 static ssize_t pp_read(struct file *file, char __user *buf, size_t count,
116                        loff_t *ppos)
117 {
118         unsigned int minor = iminor(file_inode(file));
119         struct pp_struct *pp = file->private_data;
120         char *kbuffer;
121         ssize_t bytes_read = 0;
122         struct parport *pport;
123         int mode;
124
125         if (!(pp->flags & PP_CLAIMED)) {
126                 /* Don't have the port claimed */
127                 pr_debug(CHRDEV "%x: claim the port first\n", minor);
128                 return -EINVAL;
129         }
130
131         /* Trivial case. */
132         if (count == 0)
133                 return 0;
134
135         kbuffer = kmalloc(min_t(size_t, count, PP_BUFFER_SIZE), GFP_KERNEL);
136         if (!kbuffer)
137                 return -ENOMEM;
138         pport = pp->pdev->port;
139         mode = pport->ieee1284.mode & ~(IEEE1284_DEVICEID | IEEE1284_ADDR);
140
141         parport_set_timeout(pp->pdev,
142                             (file->f_flags & O_NONBLOCK) ?
143                             PARPORT_INACTIVITY_O_NONBLOCK :
144                             pp->default_inactivity);
145
146         while (bytes_read == 0) {
147                 ssize_t need = min_t(unsigned long, count, PP_BUFFER_SIZE);
148
149                 if (mode == IEEE1284_MODE_EPP) {
150                         /* various specials for EPP mode */
151                         int flags = 0;
152                         size_t (*fn)(struct parport *, void *, size_t, int);
153
154                         if (pp->flags & PP_W91284PIC)
155                                 flags |= PARPORT_W91284PIC;
156                         if (pp->flags & PP_FASTREAD)
157                                 flags |= PARPORT_EPP_FAST;
158                         if (pport->ieee1284.mode & IEEE1284_ADDR)
159                                 fn = pport->ops->epp_read_addr;
160                         else
161                                 fn = pport->ops->epp_read_data;
162                         bytes_read = (*fn)(pport, kbuffer, need, flags);
163                 } else {
164                         bytes_read = parport_read(pport, kbuffer, need);
165                 }
166
167                 if (bytes_read != 0)
168                         break;
169
170                 if (file->f_flags & O_NONBLOCK) {
171                         bytes_read = -EAGAIN;
172                         break;
173                 }
174
175                 if (signal_pending(current)) {
176                         bytes_read = -ERESTARTSYS;
177                         break;
178                 }
179
180                 cond_resched();
181         }
182
183         parport_set_timeout(pp->pdev, pp->default_inactivity);
184
185         if (bytes_read > 0 && copy_to_user(buf, kbuffer, bytes_read))
186                 bytes_read = -EFAULT;
187
188         kfree(kbuffer);
189         pp_enable_irq(pp);
190         return bytes_read;
191 }
192
193 static ssize_t pp_write(struct file *file, const char __user *buf,
194                         size_t count, loff_t *ppos)
195 {
196         unsigned int minor = iminor(file_inode(file));
197         struct pp_struct *pp = file->private_data;
198         char *kbuffer;
199         ssize_t bytes_written = 0;
200         ssize_t wrote;
201         int mode;
202         struct parport *pport;
203
204         if (!(pp->flags & PP_CLAIMED)) {
205                 /* Don't have the port claimed */
206                 pr_debug(CHRDEV "%x: claim the port first\n", minor);
207                 return -EINVAL;
208         }
209
210         kbuffer = kmalloc(min_t(size_t, count, PP_BUFFER_SIZE), GFP_KERNEL);
211         if (!kbuffer)
212                 return -ENOMEM;
213
214         pport = pp->pdev->port;
215         mode = pport->ieee1284.mode & ~(IEEE1284_DEVICEID | IEEE1284_ADDR);
216
217         parport_set_timeout(pp->pdev,
218                             (file->f_flags & O_NONBLOCK) ?
219                             PARPORT_INACTIVITY_O_NONBLOCK :
220                             pp->default_inactivity);
221
222         while (bytes_written < count) {
223                 ssize_t n = min_t(unsigned long, count - bytes_written, PP_BUFFER_SIZE);
224
225                 if (copy_from_user(kbuffer, buf + bytes_written, n)) {
226                         bytes_written = -EFAULT;
227                         break;
228                 }
229
230                 if ((pp->flags & PP_FASTWRITE) && (mode == IEEE1284_MODE_EPP)) {
231                         /* do a fast EPP write */
232                         if (pport->ieee1284.mode & IEEE1284_ADDR) {
233                                 wrote = pport->ops->epp_write_addr(pport,
234                                         kbuffer, n, PARPORT_EPP_FAST);
235                         } else {
236                                 wrote = pport->ops->epp_write_data(pport,
237                                         kbuffer, n, PARPORT_EPP_FAST);
238                         }
239                 } else {
240                         wrote = parport_write(pp->pdev->port, kbuffer, n);
241                 }
242
243                 if (wrote <= 0) {
244                         if (!bytes_written)
245                                 bytes_written = wrote;
246                         break;
247                 }
248
249                 bytes_written += wrote;
250
251                 if (file->f_flags & O_NONBLOCK) {
252                         if (!bytes_written)
253                                 bytes_written = -EAGAIN;
254                         break;
255                 }
256
257                 if (signal_pending(current))
258                         break;
259
260                 cond_resched();
261         }
262
263         parport_set_timeout(pp->pdev, pp->default_inactivity);
264
265         kfree(kbuffer);
266         pp_enable_irq(pp);
267         return bytes_written;
268 }
269
270 static void pp_irq(void *private)
271 {
272         struct pp_struct *pp = private;
273
274         if (pp->irqresponse) {
275                 parport_write_control(pp->pdev->port, pp->irqctl);
276                 pp->irqresponse = 0;
277         }
278
279         atomic_inc(&pp->irqc);
280         wake_up_interruptible(&pp->irq_wait);
281 }
282
283 static int register_device(int minor, struct pp_struct *pp)
284 {
285         struct parport *port;
286         struct pardevice *pdev = NULL;
287         char *name;
288         struct pardev_cb ppdev_cb;
289         int rc = 0, index;
290
291         name = kasprintf(GFP_KERNEL, CHRDEV "%x", minor);
292         if (name == NULL)
293                 return -ENOMEM;
294
295         port = parport_find_number(minor);
296         if (!port) {
297                 pr_warn("%s: no associated port!\n", name);
298                 rc = -ENXIO;
299                 goto err;
300         }
301
302         index = ida_simple_get(&ida_index, 0, 0, GFP_KERNEL);
303         memset(&ppdev_cb, 0, sizeof(ppdev_cb));
304         ppdev_cb.irq_func = pp_irq;
305         ppdev_cb.flags = (pp->flags & PP_EXCL) ? PARPORT_FLAG_EXCL : 0;
306         ppdev_cb.private = pp;
307         pdev = parport_register_dev_model(port, name, &ppdev_cb, index);
308         parport_put_port(port);
309
310         if (!pdev) {
311                 pr_warn("%s: failed to register device!\n", name);
312                 rc = -ENXIO;
313                 ida_simple_remove(&ida_index, index);
314                 goto err;
315         }
316
317         pp->pdev = pdev;
318         pp->index = index;
319         dev_dbg(&pdev->dev, "registered pardevice\n");
320 err:
321         kfree(name);
322         return rc;
323 }
324
325 static enum ieee1284_phase init_phase(int mode)
326 {
327         switch (mode & ~(IEEE1284_DEVICEID
328                          | IEEE1284_ADDR)) {
329         case IEEE1284_MODE_NIBBLE:
330         case IEEE1284_MODE_BYTE:
331                 return IEEE1284_PH_REV_IDLE;
332         }
333         return IEEE1284_PH_FWD_IDLE;
334 }
335
336 static int pp_set_timeout(struct pardevice *pdev, long tv_sec, int tv_usec)
337 {
338         long to_jiffies;
339
340         if ((tv_sec < 0) || (tv_usec < 0))
341                 return -EINVAL;
342
343         to_jiffies = usecs_to_jiffies(tv_usec);
344         to_jiffies += tv_sec * HZ;
345         if (to_jiffies <= 0)
346                 return -EINVAL;
347
348         pdev->timeout = to_jiffies;
349         return 0;
350 }
351
352 static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
353 {
354         unsigned int minor = iminor(file_inode(file));
355         struct pp_struct *pp = file->private_data;
356         struct parport *port;
357         void __user *argp = (void __user *)arg;
358
359         /* First handle the cases that don't take arguments. */
360         switch (cmd) {
361         case PPCLAIM:
362             {
363                 struct ieee1284_info *info;
364                 int ret;
365
366                 if (pp->flags & PP_CLAIMED) {
367                         dev_dbg(&pp->pdev->dev, "you've already got it!\n");
368                         return -EINVAL;
369                 }
370
371                 /* Deferred device registration. */
372                 if (!pp->pdev) {
373                         int err = register_device(minor, pp);
374
375                         if (err)
376                                 return err;
377                 }
378
379                 ret = parport_claim_or_block(pp->pdev);
380                 if (ret < 0)
381                         return ret;
382
383                 pp->flags |= PP_CLAIMED;
384
385                 /* For interrupt-reporting to work, we need to be
386                  * informed of each interrupt. */
387                 pp_enable_irq(pp);
388
389                 /* We may need to fix up the state machine. */
390                 info = &pp->pdev->port->ieee1284;
391                 pp->saved_state.mode = info->mode;
392                 pp->saved_state.phase = info->phase;
393                 info->mode = pp->state.mode;
394                 info->phase = pp->state.phase;
395                 pp->default_inactivity = parport_set_timeout(pp->pdev, 0);
396                 parport_set_timeout(pp->pdev, pp->default_inactivity);
397
398                 return 0;
399             }
400         case PPEXCL:
401                 if (pp->pdev) {
402                         dev_dbg(&pp->pdev->dev,
403                                 "too late for PPEXCL; already registered\n");
404                         if (pp->flags & PP_EXCL)
405                                 /* But it's not really an error. */
406                                 return 0;
407                         /* There's no chance of making the driver happy. */
408                         return -EINVAL;
409                 }
410
411                 /* Just remember to register the device exclusively
412                  * when we finally do the registration. */
413                 pp->flags |= PP_EXCL;
414                 return 0;
415         case PPSETMODE:
416             {
417                 int mode;
418
419                 if (copy_from_user(&mode, argp, sizeof(mode)))
420                         return -EFAULT;
421                 /* FIXME: validate mode */
422                 pp->state.mode = mode;
423                 pp->state.phase = init_phase(mode);
424
425                 if (pp->flags & PP_CLAIMED) {
426                         pp->pdev->port->ieee1284.mode = mode;
427                         pp->pdev->port->ieee1284.phase = pp->state.phase;
428                 }
429
430                 return 0;
431             }
432         case PPGETMODE:
433             {
434                 int mode;
435
436                 if (pp->flags & PP_CLAIMED)
437                         mode = pp->pdev->port->ieee1284.mode;
438                 else
439                         mode = pp->state.mode;
440
441                 if (copy_to_user(argp, &mode, sizeof(mode)))
442                         return -EFAULT;
443                 return 0;
444             }
445         case PPSETPHASE:
446             {
447                 int phase;
448
449                 if (copy_from_user(&phase, argp, sizeof(phase)))
450                         return -EFAULT;
451
452                 /* FIXME: validate phase */
453                 pp->state.phase = phase;
454
455                 if (pp->flags & PP_CLAIMED)
456                         pp->pdev->port->ieee1284.phase = phase;
457
458                 return 0;
459             }
460         case PPGETPHASE:
461             {
462                 int phase;
463
464                 if (pp->flags & PP_CLAIMED)
465                         phase = pp->pdev->port->ieee1284.phase;
466                 else
467                         phase = pp->state.phase;
468                 if (copy_to_user(argp, &phase, sizeof(phase)))
469                         return -EFAULT;
470                 return 0;
471             }
472         case PPGETMODES:
473             {
474                 unsigned int modes;
475
476                 port = parport_find_number(minor);
477                 if (!port)
478                         return -ENODEV;
479
480                 modes = port->modes;
481                 parport_put_port(port);
482                 if (copy_to_user(argp, &modes, sizeof(modes)))
483                         return -EFAULT;
484                 return 0;
485             }
486         case PPSETFLAGS:
487             {
488                 int uflags;
489
490                 if (copy_from_user(&uflags, argp, sizeof(uflags)))
491                         return -EFAULT;
492                 pp->flags &= ~PP_FLAGMASK;
493                 pp->flags |= (uflags & PP_FLAGMASK);
494                 return 0;
495             }
496         case PPGETFLAGS:
497             {
498                 int uflags;
499
500                 uflags = pp->flags & PP_FLAGMASK;
501                 if (copy_to_user(argp, &uflags, sizeof(uflags)))
502                         return -EFAULT;
503                 return 0;
504             }
505         }       /* end switch() */
506
507         /* Everything else requires the port to be claimed, so check
508          * that now. */
509         if ((pp->flags & PP_CLAIMED) == 0) {
510                 pr_debug(CHRDEV "%x: claim the port first\n", minor);
511                 return -EINVAL;
512         }
513
514         port = pp->pdev->port;
515         switch (cmd) {
516                 struct ieee1284_info *info;
517                 unsigned char reg;
518                 unsigned char mask;
519                 int mode;
520                 s32 time32[2];
521                 s64 time64[2];
522                 struct timespec64 ts;
523                 int ret;
524
525         case PPRSTATUS:
526                 reg = parport_read_status(port);
527                 if (copy_to_user(argp, &reg, sizeof(reg)))
528                         return -EFAULT;
529                 return 0;
530         case PPRDATA:
531                 reg = parport_read_data(port);
532                 if (copy_to_user(argp, &reg, sizeof(reg)))
533                         return -EFAULT;
534                 return 0;
535         case PPRCONTROL:
536                 reg = parport_read_control(port);
537                 if (copy_to_user(argp, &reg, sizeof(reg)))
538                         return -EFAULT;
539                 return 0;
540         case PPYIELD:
541                 parport_yield_blocking(pp->pdev);
542                 return 0;
543
544         case PPRELEASE:
545                 /* Save the state machine's state. */
546                 info = &pp->pdev->port->ieee1284;
547                 pp->state.mode = info->mode;
548                 pp->state.phase = info->phase;
549                 info->mode = pp->saved_state.mode;
550                 info->phase = pp->saved_state.phase;
551                 parport_release(pp->pdev);
552                 pp->flags &= ~PP_CLAIMED;
553                 return 0;
554
555         case PPWCONTROL:
556                 if (copy_from_user(&reg, argp, sizeof(reg)))
557                         return -EFAULT;
558                 parport_write_control(port, reg);
559                 return 0;
560
561         case PPWDATA:
562                 if (copy_from_user(&reg, argp, sizeof(reg)))
563                         return -EFAULT;
564                 parport_write_data(port, reg);
565                 return 0;
566
567         case PPFCONTROL:
568                 if (copy_from_user(&mask, argp,
569                                    sizeof(mask)))
570                         return -EFAULT;
571                 if (copy_from_user(&reg, 1 + (unsigned char __user *) arg,
572                                    sizeof(reg)))
573                         return -EFAULT;
574                 parport_frob_control(port, mask, reg);
575                 return 0;
576
577         case PPDATADIR:
578                 if (copy_from_user(&mode, argp, sizeof(mode)))
579                         return -EFAULT;
580                 if (mode)
581                         port->ops->data_reverse(port);
582                 else
583                         port->ops->data_forward(port);
584                 return 0;
585
586         case PPNEGOT:
587                 if (copy_from_user(&mode, argp, sizeof(mode)))
588                         return -EFAULT;
589                 switch ((ret = parport_negotiate(port, mode))) {
590                 case 0: break;
591                 case -1: /* handshake failed, peripheral not IEEE 1284 */
592                         ret = -EIO;
593                         break;
594                 case 1:  /* handshake succeeded, peripheral rejected mode */
595                         ret = -ENXIO;
596                         break;
597                 }
598                 pp_enable_irq(pp);
599                 return ret;
600
601         case PPWCTLONIRQ:
602                 if (copy_from_user(&reg, argp, sizeof(reg)))
603                         return -EFAULT;
604
605                 /* Remember what to set the control lines to, for next
606                  * time we get an interrupt. */
607                 pp->irqctl = reg;
608                 pp->irqresponse = 1;
609                 return 0;
610
611         case PPCLRIRQ:
612                 ret = atomic_read(&pp->irqc);
613                 if (copy_to_user(argp, &ret, sizeof(ret)))
614                         return -EFAULT;
615                 atomic_sub(ret, &pp->irqc);
616                 return 0;
617
618         case PPSETTIME32:
619                 if (copy_from_user(time32, argp, sizeof(time32)))
620                         return -EFAULT;
621
622                 return pp_set_timeout(pp->pdev, time32[0], time32[1]);
623
624         case PPSETTIME64:
625                 if (copy_from_user(time64, argp, sizeof(time64)))
626                         return -EFAULT;
627
628                 return pp_set_timeout(pp->pdev, time64[0], time64[1]);
629
630         case PPGETTIME32:
631                 jiffies_to_timespec64(pp->pdev->timeout, &ts);
632                 time32[0] = ts.tv_sec;
633                 time32[1] = ts.tv_nsec / NSEC_PER_USEC;
634                 if ((time32[0] < 0) || (time32[1] < 0))
635                         return -EINVAL;
636
637                 if (copy_to_user(argp, time32, sizeof(time32)))
638                         return -EFAULT;
639
640                 return 0;
641
642         case PPGETTIME64:
643                 jiffies_to_timespec64(pp->pdev->timeout, &ts);
644                 time64[0] = ts.tv_sec;
645                 time64[1] = ts.tv_nsec / NSEC_PER_USEC;
646                 if ((time64[0] < 0) || (time64[1] < 0))
647                         return -EINVAL;
648
649                 if (copy_to_user(argp, time64, sizeof(time64)))
650                         return -EFAULT;
651
652                 return 0;
653
654         default:
655                 dev_dbg(&pp->pdev->dev, "What? (cmd=0x%x)\n", cmd);
656                 return -EINVAL;
657         }
658
659         /* Keep the compiler happy */
660         return 0;
661 }
662
663 static long pp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
664 {
665         long ret;
666
667         mutex_lock(&pp_do_mutex);
668         ret = pp_do_ioctl(file, cmd, arg);
669         mutex_unlock(&pp_do_mutex);
670         return ret;
671 }
672
673 #ifdef CONFIG_COMPAT
674 static long pp_compat_ioctl(struct file *file, unsigned int cmd,
675                             unsigned long arg)
676 {
677         return pp_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
678 }
679 #endif
680
681 static int pp_open(struct inode *inode, struct file *file)
682 {
683         unsigned int minor = iminor(inode);
684         struct pp_struct *pp;
685
686         if (minor >= PARPORT_MAX)
687                 return -ENXIO;
688
689         pp = kmalloc(sizeof(struct pp_struct), GFP_KERNEL);
690         if (!pp)
691                 return -ENOMEM;
692
693         pp->state.mode = IEEE1284_MODE_COMPAT;
694         pp->state.phase = init_phase(pp->state.mode);
695         pp->flags = 0;
696         pp->irqresponse = 0;
697         atomic_set(&pp->irqc, 0);
698         init_waitqueue_head(&pp->irq_wait);
699
700         /* Defer the actual device registration until the first claim.
701          * That way, we know whether or not the driver wants to have
702          * exclusive access to the port (PPEXCL).
703          */
704         pp->pdev = NULL;
705         file->private_data = pp;
706
707         return 0;
708 }
709
710 static int pp_release(struct inode *inode, struct file *file)
711 {
712         unsigned int minor = iminor(inode);
713         struct pp_struct *pp = file->private_data;
714         int compat_negot;
715
716         compat_negot = 0;
717         if (!(pp->flags & PP_CLAIMED) && pp->pdev &&
718             (pp->state.mode != IEEE1284_MODE_COMPAT)) {
719                 struct ieee1284_info *info;
720
721                 /* parport released, but not in compatibility mode */
722                 parport_claim_or_block(pp->pdev);
723                 pp->flags |= PP_CLAIMED;
724                 info = &pp->pdev->port->ieee1284;
725                 pp->saved_state.mode = info->mode;
726                 pp->saved_state.phase = info->phase;
727                 info->mode = pp->state.mode;
728                 info->phase = pp->state.phase;
729                 compat_negot = 1;
730         } else if ((pp->flags & PP_CLAIMED) && pp->pdev &&
731             (pp->pdev->port->ieee1284.mode != IEEE1284_MODE_COMPAT)) {
732                 compat_negot = 2;
733         }
734         if (compat_negot) {
735                 parport_negotiate(pp->pdev->port, IEEE1284_MODE_COMPAT);
736                 dev_dbg(&pp->pdev->dev,
737                         "negotiated back to compatibility mode because user-space forgot\n");
738         }
739
740         if (pp->flags & PP_CLAIMED) {
741                 struct ieee1284_info *info;
742
743                 info = &pp->pdev->port->ieee1284;
744                 pp->state.mode = info->mode;
745                 pp->state.phase = info->phase;
746                 info->mode = pp->saved_state.mode;
747                 info->phase = pp->saved_state.phase;
748                 parport_release(pp->pdev);
749                 if (compat_negot != 1) {
750                         pr_debug(CHRDEV "%x: released pardevice "
751                                 "because user-space forgot\n", minor);
752                 }
753         }
754
755         if (pp->pdev) {
756                 parport_unregister_device(pp->pdev);
757                 ida_simple_remove(&ida_index, pp->index);
758                 pp->pdev = NULL;
759                 pr_debug(CHRDEV "%x: unregistered pardevice\n", minor);
760         }
761
762         kfree(pp);
763
764         return 0;
765 }
766
767 /* No kernel lock held - fine */
768 static __poll_t pp_poll(struct file *file, poll_table *wait)
769 {
770         struct pp_struct *pp = file->private_data;
771         __poll_t mask = 0;
772
773         poll_wait(file, &pp->irq_wait, wait);
774         if (atomic_read(&pp->irqc))
775                 mask |= EPOLLIN | EPOLLRDNORM;
776
777         return mask;
778 }
779
780 static struct class *ppdev_class;
781
782 static const struct file_operations pp_fops = {
783         .owner          = THIS_MODULE,
784         .llseek         = no_llseek,
785         .read           = pp_read,
786         .write          = pp_write,
787         .poll           = pp_poll,
788         .unlocked_ioctl = pp_ioctl,
789 #ifdef CONFIG_COMPAT
790         .compat_ioctl   = pp_compat_ioctl,
791 #endif
792         .open           = pp_open,
793         .release        = pp_release,
794 };
795
796 static void pp_attach(struct parport *port)
797 {
798         struct device *ret;
799
800         if (devices[port->number])
801                 return;
802
803         ret = device_create(ppdev_class, port->dev,
804                             MKDEV(PP_MAJOR, port->number), NULL,
805                             "parport%d", port->number);
806         if (IS_ERR(ret)) {
807                 pr_err("Failed to create device parport%d\n",
808                        port->number);
809                 return;
810         }
811         devices[port->number] = ret;
812 }
813
814 static void pp_detach(struct parport *port)
815 {
816         if (!devices[port->number])
817                 return;
818
819         device_destroy(ppdev_class, MKDEV(PP_MAJOR, port->number));
820         devices[port->number] = NULL;
821 }
822
823 static int pp_probe(struct pardevice *par_dev)
824 {
825         struct device_driver *drv = par_dev->dev.driver;
826         int len = strlen(drv->name);
827
828         if (strncmp(par_dev->name, drv->name, len))
829                 return -ENODEV;
830
831         return 0;
832 }
833
834 static struct parport_driver pp_driver = {
835         .name           = CHRDEV,
836         .probe          = pp_probe,
837         .match_port     = pp_attach,
838         .detach         = pp_detach,
839         .devmodel       = true,
840 };
841
842 static int __init ppdev_init(void)
843 {
844         int err = 0;
845
846         if (register_chrdev(PP_MAJOR, CHRDEV, &pp_fops)) {
847                 pr_warn(CHRDEV ": unable to get major %d\n", PP_MAJOR);
848                 return -EIO;
849         }
850         ppdev_class = class_create(THIS_MODULE, CHRDEV);
851         if (IS_ERR(ppdev_class)) {
852                 err = PTR_ERR(ppdev_class);
853                 goto out_chrdev;
854         }
855         err = parport_register_driver(&pp_driver);
856         if (err < 0) {
857                 pr_warn(CHRDEV ": unable to register with parport\n");
858                 goto out_class;
859         }
860
861         pr_info(PP_VERSION "\n");
862         goto out;
863
864 out_class:
865         class_destroy(ppdev_class);
866 out_chrdev:
867         unregister_chrdev(PP_MAJOR, CHRDEV);
868 out:
869         return err;
870 }
871
872 static void __exit ppdev_cleanup(void)
873 {
874         /* Clean up all parport stuff */
875         parport_unregister_driver(&pp_driver);
876         class_destroy(ppdev_class);
877         unregister_chrdev(PP_MAJOR, CHRDEV);
878 }
879
880 module_init(ppdev_init);
881 module_exit(ppdev_cleanup);
882
883 MODULE_LICENSE("GPL");
884 MODULE_ALIAS_CHARDEV_MAJOR(PP_MAJOR);