drivers/char/ipmi/ipmi_si_intf.c

   1 /*
   2  * ipmi_si.c
   3  *
   4  * The interface to the IPMI driver for the system interfaces (KCS, SMIC,
   5  * BT).
   6  *
   7  * Author: MontaVista Software, Inc.
   8  *         Corey Minyard <minyard@mvista.com>
   9  *         source@mvista.com
  10  *
  11  * Copyright 2002 MontaVista Software Inc.
  12  *
  13  *  This program is free software; you can redistribute it and/or modify it
  14  *  under the terms of the GNU General Public License as published by the
  15  *  Free Software Foundation; either version 2 of the License, or (at your
  16  *  option) any later version.
  17  *
  18  *
  19  *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  20  *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  21  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  22  *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  23  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  24  *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
  25  *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  26  *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  27  *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  28  *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  29  *
  30  *  You should have received a copy of the GNU General Public License along
  31  *  with this program; if not, write to the Free Software Foundation, Inc.,
  32  *  675 Mass Ave, Cambridge, MA 02139, USA.
  33  */
  34
  35 /*
  36  * This file holds the "policy" for the interface to the SMI state
  37  * machine.  It does the configuration, handles timers and interrupts,
  38  * and drives the real SMI state machine.
  39  */
  40
  41 #include <linux/config.h>
  42 #include <linux/module.h>
  43 #include <linux/moduleparam.h>
  44 #include <asm/system.h>
  45 #include <linux/sched.h>
  46 #include <linux/timer.h>
  47 #include <linux/errno.h>
  48 #include <linux/spinlock.h>
  49 #include <linux/slab.h>
  50 #include <linux/delay.h>
  51 #include <linux/list.h>
  52 #include <linux/pci.h>
  53 #include <linux/ioport.h>
  54 #include <asm/irq.h>
  55 #ifdef CONFIG_HIGH_RES_TIMERS
  56 #include <linux/hrtime.h>
  57 # if defined(schedule_next_int)
  58 /* Old high-res timer code, do translations. */
  59 #  define get_arch_cycles(a) quick_update_jiffies_sub(a)
  60 #  define arch_cycles_per_jiffy cycles_per_jiffies
  61 # endif
  62 static inline void add_usec_to_timer(struct timer_list *t, long v)
  63 {
  64         t->arch_cycle_expires += nsec_to_arch_cycle(v * 1000);
  65         while (t->arch_cycle_expires >= arch_cycles_per_jiffy)
  66         {
  67                 t->expires++;
  68                 t->arch_cycle_expires -= arch_cycles_per_jiffy;
  69         }
  70 }
  71 #endif
  72 #include <linux/interrupt.h>
  73 #include <linux/rcupdate.h>
  74 #include <linux/ipmi_smi.h>
  75 #include <asm/io.h>
  76 #include "ipmi_si_sm.h"
  77 #include <linux/init.h>
  78 #include <linux/dmi.h>
  79
  80 /* Measure times between events in the driver. */
  81 #undef DEBUG_TIMING
  82
  83 /* Call every 10 ms. */
  84 #define SI_TIMEOUT_TIME_USEC    10000
  85 #define SI_USEC_PER_JIFFY       (1000000/HZ)
  86 #define SI_TIMEOUT_JIFFIES      (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY)
  87 #define SI_SHORT_TIMEOUT_USEC  250 /* .25ms when the SM request a
  88                                        short timeout */
  89
  90 enum si_intf_state {
  91         SI_NORMAL,
  92         SI_GETTING_FLAGS,
  93         SI_GETTING_EVENTS,
  94         SI_CLEARING_FLAGS,
  95         SI_CLEARING_FLAGS_THEN_SET_IRQ,
  96         SI_GETTING_MESSAGES,
  97         SI_ENABLE_INTERRUPTS1,
  98         SI_ENABLE_INTERRUPTS2
  99         /* FIXME - add watchdog stuff. */
 100 };
 101
 102 /* Some BT-specific defines we need here. */
 103 #define IPMI_BT_INTMASK_REG             2
 104 #define IPMI_BT_INTMASK_CLEAR_IRQ_BIT   2
 105 #define IPMI_BT_INTMASK_ENABLE_IRQ_BIT  1
 106
 107 enum si_type {
 108     SI_KCS, SI_SMIC, SI_BT
 109 };
 110
 111 struct ipmi_device_id {
 112         unsigned char device_id;
 113         unsigned char device_revision;
 114         unsigned char firmware_revision_1;
 115         unsigned char firmware_revision_2;
 116         unsigned char ipmi_version;
 117         unsigned char additional_device_support;
 118         unsigned char manufacturer_id[3];
 119         unsigned char product_id[2];
 120         unsigned char aux_firmware_revision[4];
 121 } __attribute__((packed));
 122
 123 #define ipmi_version_major(v) ((v)->ipmi_version & 0xf)
 124 #define ipmi_version_minor(v) ((v)->ipmi_version >> 4)
 125
 126 struct smi_info
 127 {
 128         ipmi_smi_t             intf;
 129         struct si_sm_data      *si_sm;
 130         struct si_sm_handlers  *handlers;
 131         enum si_type           si_type;
 132         spinlock_t             si_lock;
 133         spinlock_t             msg_lock;
 134         struct list_head       xmit_msgs;
 135         struct list_head       hp_xmit_msgs;
 136         struct ipmi_smi_msg    *curr_msg;
 137         enum si_intf_state     si_state;
 138
 139         /* Used to handle the various types of I/O that can occur with
 140            IPMI */
 141         struct si_sm_io io;
 142         int (*io_setup)(struct smi_info *info);
 143         void (*io_cleanup)(struct smi_info *info);
 144         int (*irq_setup)(struct smi_info *info);
 145         void (*irq_cleanup)(struct smi_info *info);
 146         unsigned int io_size;
 147
 148         /* Per-OEM handler, called from handle_flags().
 149            Returns 1 when handle_flags() needs to be re-run
 150            or 0 indicating it set si_state itself.
 151         */
 152         int (*oem_data_avail_handler)(struct smi_info *smi_info);
 153
 154         /* Flags from the last GET_MSG_FLAGS command, used when an ATTN
 155            is set to hold the flags until we are done handling everything
 156            from the flags. */
 157 #define RECEIVE_MSG_AVAIL       0x01
 158 #define EVENT_MSG_BUFFER_FULL   0x02
 159 #define WDT_PRE_TIMEOUT_INT     0x08
 160 #define OEM0_DATA_AVAIL     0x20
 161 #define OEM1_DATA_AVAIL     0x40
 162 #define OEM2_DATA_AVAIL     0x80
 163 #define OEM_DATA_AVAIL      (OEM0_DATA_AVAIL | \
 164                              OEM1_DATA_AVAIL | \
 165                              OEM2_DATA_AVAIL)
 166         unsigned char       msg_flags;
 167
 168         /* If set to true, this will request events the next time the
 169            state machine is idle. */
 170         atomic_t            req_events;
 171
 172         /* If true, run the state machine to completion on every send
 173            call.  Generally used after a panic to make sure stuff goes
 174            out. */
 175         int                 run_to_completion;
 176
 177         /* The I/O port of an SI interface. */
 178         int                 port;
 179
 180         /* The space between start addresses of the two ports.  For
 181            instance, if the first port is 0xca2 and the spacing is 4, then
 182            the second port is 0xca6. */
 183         unsigned int        spacing;
 184
 185         /* zero if no irq; */
 186         int                 irq;
 187
 188         /* The timer for this si. */
 189         struct timer_list   si_timer;
 190
 191         /* The time (in jiffies) the last timeout occurred at. */
 192         unsigned long       last_timeout_jiffies;
 193
 194         /* Used to gracefully stop the timer without race conditions. */
 195         volatile int        stop_operation;
 196         volatile int        timer_stopped;
 197
 198         /* The driver will disable interrupts when it gets into a
 199            situation where it cannot handle messages due to lack of
 200            memory.  Once that situation clears up, it will re-enable
 201            interrupts. */
 202         int interrupt_disabled;
 203
 204         struct ipmi_device_id device_id;
 205
 206         /* Slave address, could be reported from DMI. */
 207         unsigned char slave_addr;
 208
 209         /* Counters and things for the proc filesystem. */
 210         spinlock_t count_lock;
 211         unsigned long short_timeouts;
 212         unsigned long long_timeouts;
 213         unsigned long timeout_restarts;
 214         unsigned long idles;
 215         unsigned long interrupts;
 216         unsigned long attentions;
 217         unsigned long flag_fetches;
 218         unsigned long hosed_count;
 219         unsigned long complete_transactions;
 220         unsigned long events;
 221         unsigned long watchdog_pretimeouts;
 222         unsigned long incoming_messages;
 223 };
 224
 225 static void si_restart_short_timer(struct smi_info *smi_info);
 226
 227 static void deliver_recv_msg(struct smi_info *smi_info,
 228                              struct ipmi_smi_msg *msg)
 229 {
 230         /* Deliver the message to the upper layer with the lock
 231            released. */
 232         spin_unlock(&(smi_info->si_lock));
 233         ipmi_smi_msg_received(smi_info->intf, msg);
 234         spin_lock(&(smi_info->si_lock));
 235 }
 236
 237 static void return_hosed_msg(struct smi_info *smi_info)
 238 {
 239         struct ipmi_smi_msg *msg = smi_info->curr_msg;
 240
 241         /* Make it a reponse */
 242         msg->rsp[0] = msg->data[0] | 4;
 243         msg->rsp[1] = msg->data[1];
 244         msg->rsp[2] = 0xFF; /* Unknown error. */
 245         msg->rsp_size = 3;
 246
 247         smi_info->curr_msg = NULL;
 248         deliver_recv_msg(smi_info, msg);
 249 }
 250
 251 static enum si_sm_result start_next_msg(struct smi_info *smi_info)
 252 {
 253         int              rv;
 254         struct list_head *entry = NULL;
 255 #ifdef DEBUG_TIMING
 256         struct timeval t;
 257 #endif
 258
 259         /* No need to save flags, we aleady have interrupts off and we
 260            already hold the SMI lock. */
 261         spin_lock(&(smi_info->msg_lock));
 262
 263         /* Pick the high priority queue first. */
 264         if (! list_empty(&(smi_info->hp_xmit_msgs))) {
 265                 entry = smi_info->hp_xmit_msgs.next;
 266         } else if (! list_empty(&(smi_info->xmit_msgs))) {
 267                 entry = smi_info->xmit_msgs.next;
 268         }
 269
 270         if (! entry) {
 271                 smi_info->curr_msg = NULL;
 272                 rv = SI_SM_IDLE;
 273         } else {
 274                 int err;
 275
 276                 list_del(entry);
 277                 smi_info->curr_msg = list_entry(entry,
 278                                                 struct ipmi_smi_msg,
 279                                                 link);
 280 #ifdef DEBUG_TIMING
 281                 do_gettimeofday(&t);
 282                 printk("**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 283 #endif
 284                 err = smi_info->handlers->start_transaction(
 285                         smi_info->si_sm,
 286                         smi_info->curr_msg->data,
 287                         smi_info->curr_msg->data_size);
 288                 if (err) {
 289                         return_hosed_msg(smi_info);
 290                 }
 291
 292                 rv = SI_SM_CALL_WITHOUT_DELAY;
 293         }
 294         spin_unlock(&(smi_info->msg_lock));
 295
 296         return rv;
 297 }
 298
 299 static void start_enable_irq(struct smi_info *smi_info)
 300 {
 301         unsigned char msg[2];
 302
 303         /* If we are enabling interrupts, we have to tell the
 304            BMC to use them. */
 305         msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 306         msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
 307
 308         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
 309         smi_info->si_state = SI_ENABLE_INTERRUPTS1;
 310 }
 311
 312 static void start_clear_flags(struct smi_info *smi_info)
 313 {
 314         unsigned char msg[3];
 315
 316         /* Make sure the watchdog pre-timeout flag is not set at startup. */
 317         msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 318         msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
 319         msg[2] = WDT_PRE_TIMEOUT_INT;
 320
 321         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
 322         smi_info->si_state = SI_CLEARING_FLAGS;
 323 }
 324
 325 /* When we have a situtaion where we run out of memory and cannot
 326    allocate messages, we just leave them in the BMC and run the system
 327    polled until we can allocate some memory.  Once we have some
 328    memory, we will re-enable the interrupt. */
 329 static inline void disable_si_irq(struct smi_info *smi_info)
 330 {
 331         if ((smi_info->irq) && (! smi_info->interrupt_disabled)) {
 332                 disable_irq_nosync(smi_info->irq);
 333                 smi_info->interrupt_disabled = 1;
 334         }
 335 }
 336
 337 static inline void enable_si_irq(struct smi_info *smi_info)
 338 {
 339         if ((smi_info->irq) && (smi_info->interrupt_disabled)) {
 340                 enable_irq(smi_info->irq);
 341                 smi_info->interrupt_disabled = 0;
 342         }
 343 }
 344
 345 static void handle_flags(struct smi_info *smi_info)
 346 {
 347  retry:
 348         if (smi_info->msg_flags & WDT_PRE_TIMEOUT_INT) {
 349                 /* Watchdog pre-timeout */
 350                 spin_lock(&smi_info->count_lock);
 351                 smi_info->watchdog_pretimeouts++;
 352                 spin_unlock(&smi_info->count_lock);
 353
 354                 start_clear_flags(smi_info);
 355                 smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
 356                 spin_unlock(&(smi_info->si_lock));
 357                 ipmi_smi_watchdog_pretimeout(smi_info->intf);
 358                 spin_lock(&(smi_info->si_lock));
 359         } else if (smi_info->msg_flags & RECEIVE_MSG_AVAIL) {
 360                 /* Messages available. */
 361                 smi_info->curr_msg = ipmi_alloc_smi_msg();
 362                 if (! smi_info->curr_msg) {
 363                         disable_si_irq(smi_info);
 364                         smi_info->si_state = SI_NORMAL;
 365                         return;
 366                 }
 367                 enable_si_irq(smi_info);
 368
 369                 smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
 370                 smi_info->curr_msg->data[1] = IPMI_GET_MSG_CMD;
 371                 smi_info->curr_msg->data_size = 2;
 372
 373                 smi_info->handlers->start_transaction(
 374                         smi_info->si_sm,
 375                         smi_info->curr_msg->data,
 376                         smi_info->curr_msg->data_size);
 377                 smi_info->si_state = SI_GETTING_MESSAGES;
 378         } else if (smi_info->msg_flags & EVENT_MSG_BUFFER_FULL) {
 379                 /* Events available. */
 380                 smi_info->curr_msg = ipmi_alloc_smi_msg();
 381                 if (! smi_info->curr_msg) {
 382                         disable_si_irq(smi_info);
 383                         smi_info->si_state = SI_NORMAL;
 384                         return;
 385                 }
 386                 enable_si_irq(smi_info);
 387
 388                 smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
 389                 smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
 390                 smi_info->curr_msg->data_size = 2;
 391
 392                 smi_info->handlers->start_transaction(
 393                         smi_info->si_sm,
 394                         smi_info->curr_msg->data,
 395                         smi_info->curr_msg->data_size);
 396                 smi_info->si_state = SI_GETTING_EVENTS;
 397         } else if (smi_info->msg_flags & OEM_DATA_AVAIL) {
 398                 if (smi_info->oem_data_avail_handler)
 399                         if (smi_info->oem_data_avail_handler(smi_info))
 400                                 goto retry;
 401         } else {
 402                 smi_info->si_state = SI_NORMAL;
 403         }
 404 }
 405
 406 static void handle_transaction_done(struct smi_info *smi_info)
 407 {
 408         struct ipmi_smi_msg *msg;
 409 #ifdef DEBUG_TIMING
 410         struct timeval t;
 411
 412         do_gettimeofday(&t);
 413         printk("**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 414 #endif
 415         switch (smi_info->si_state) {
 416         case SI_NORMAL:
 417                 if (! smi_info->curr_msg)
 418                         break;
 419
 420                 smi_info->curr_msg->rsp_size
 421                         = smi_info->handlers->get_result(
 422                                 smi_info->si_sm,
 423                                 smi_info->curr_msg->rsp,
 424                                 IPMI_MAX_MSG_LENGTH);
 425
 426                 /* Do this here becase deliver_recv_msg() releases the
 427                    lock, and a new message can be put in during the
 428                    time the lock is released. */
 429                 msg = smi_info->curr_msg;
 430                 smi_info->curr_msg = NULL;
 431                 deliver_recv_msg(smi_info, msg);
 432                 break;
 433
 434         case SI_GETTING_FLAGS:
 435         {
 436                 unsigned char msg[4];
 437                 unsigned int  len;
 438
 439                 /* We got the flags from the SMI, now handle them. */
 440                 len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 441                 if (msg[2] != 0) {
 442                         /* Error fetching flags, just give up for
 443                            now. */
 444                         smi_info->si_state = SI_NORMAL;
 445                 } else if (len < 4) {
 446                         /* Hmm, no flags.  That's technically illegal, but
 447                            don't use uninitialized data. */
 448                         smi_info->si_state = SI_NORMAL;
 449                 } else {
 450                         smi_info->msg_flags = msg[3];
 451                         handle_flags(smi_info);
 452                 }
 453                 break;
 454         }
 455
 456         case SI_CLEARING_FLAGS:
 457         case SI_CLEARING_FLAGS_THEN_SET_IRQ:
 458         {
 459                 unsigned char msg[3];
 460
 461                 /* We cleared the flags. */
 462                 smi_info->handlers->get_result(smi_info->si_sm, msg, 3);
 463                 if (msg[2] != 0) {
 464                         /* Error clearing flags */
 465                         printk(KERN_WARNING
 466                                "ipmi_si: Error clearing flags: %2.2x\n",
 467                                msg[2]);
 468                 }
 469                 if (smi_info->si_state == SI_CLEARING_FLAGS_THEN_SET_IRQ)
 470                         start_enable_irq(smi_info);
 471                 else
 472                         smi_info->si_state = SI_NORMAL;
 473                 break;
 474         }
 475
 476         case SI_GETTING_EVENTS:
 477         {
 478                 smi_info->curr_msg->rsp_size
 479                         = smi_info->handlers->get_result(
 480                                 smi_info->si_sm,
 481                                 smi_info->curr_msg->rsp,
 482                                 IPMI_MAX_MSG_LENGTH);
 483
 484                 /* Do this here becase deliver_recv_msg() releases the
 485                    lock, and a new message can be put in during the
 486                    time the lock is released. */
 487                 msg = smi_info->curr_msg;
 488                 smi_info->curr_msg = NULL;
 489                 if (msg->rsp[2] != 0) {
 490                         /* Error getting event, probably done. */
 491                         msg->done(msg);
 492
 493                         /* Take off the event flag. */
 494                         smi_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
 495                         handle_flags(smi_info);
 496                 } else {
 497                         spin_lock(&smi_info->count_lock);
 498                         smi_info->events++;
 499                         spin_unlock(&smi_info->count_lock);
 500
 501                         /* Do this before we deliver the message
 502                            because delivering the message releases the
 503                            lock and something else can mess with the
 504                            state. */
 505                         handle_flags(smi_info);
 506
 507                         deliver_recv_msg(smi_info, msg);
 508                 }
 509                 break;
 510         }
 511
 512         case SI_GETTING_MESSAGES:
 513         {
 514                 smi_info->curr_msg->rsp_size
 515                         = smi_info->handlers->get_result(
 516                                 smi_info->si_sm,
 517                                 smi_info->curr_msg->rsp,
 518                                 IPMI_MAX_MSG_LENGTH);
 519
 520                 /* Do this here becase deliver_recv_msg() releases the
 521                    lock, and a new message can be put in during the
 522                    time the lock is released. */
 523                 msg = smi_info->curr_msg;
 524                 smi_info->curr_msg = NULL;
 525                 if (msg->rsp[2] != 0) {
 526                         /* Error getting event, probably done. */
 527                         msg->done(msg);
 528
 529                         /* Take off the msg flag. */
 530                         smi_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
 531                         handle_flags(smi_info);
 532                 } else {
 533                         spin_lock(&smi_info->count_lock);
 534                         smi_info->incoming_messages++;
 535                         spin_unlock(&smi_info->count_lock);
 536
 537                         /* Do this before we deliver the message
 538                            because delivering the message releases the
 539                            lock and something else can mess with the
 540                            state. */
 541                         handle_flags(smi_info);
 542
 543                         deliver_recv_msg(smi_info, msg);
 544                 }
 545                 break;
 546         }
 547
 548         case SI_ENABLE_INTERRUPTS1:
 549         {
 550                 unsigned char msg[4];
 551
 552                 /* We got the flags from the SMI, now handle them. */
 553                 smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 554                 if (msg[2] != 0) {
 555                         printk(KERN_WARNING
 556                                "ipmi_si: Could not enable interrupts"
 557                                ", failed get, using polled mode.\n");
 558                         smi_info->si_state = SI_NORMAL;
 559                 } else {
 560                         msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 561                         msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
 562                         msg[2] = msg[3] | 1; /* enable msg queue int */
 563                         smi_info->handlers->start_transaction(
 564                                 smi_info->si_sm, msg, 3);
 565                         smi_info->si_state = SI_ENABLE_INTERRUPTS2;
 566                 }
 567                 break;
 568         }
 569
 570         case SI_ENABLE_INTERRUPTS2:
 571         {
 572                 unsigned char msg[4];
 573
 574                 /* We got the flags from the SMI, now handle them. */
 575                 smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 576                 if (msg[2] != 0) {
 577                         printk(KERN_WARNING
 578                                "ipmi_si: Could not enable interrupts"
 579                                ", failed set, using polled mode.\n");
 580                 }
 581                 smi_info->si_state = SI_NORMAL;
 582                 break;
 583         }
 584         }
 585 }
 586
 587 /* Called on timeouts and events.  Timeouts should pass the elapsed
 588    time, interrupts should pass in zero. */
 589 static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
 590                                            int time)
 591 {
 592         enum si_sm_result si_sm_result;
 593
 594  restart:
 595         /* There used to be a loop here that waited a little while
 596            (around 25us) before giving up.  That turned out to be
 597            pointless, the minimum delays I was seeing were in the 300us
 598            range, which is far too long to wait in an interrupt.  So
 599            we just run until the state machine tells us something
 600            happened or it needs a delay. */
 601         si_sm_result = smi_info->handlers->event(smi_info->si_sm, time);
 602         time = 0;
 603         while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY)
 604         {
 605                 si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
 606         }
 607
 608         if (si_sm_result == SI_SM_TRANSACTION_COMPLETE)
 609         {
 610                 spin_lock(&smi_info->count_lock);
 611                 smi_info->complete_transactions++;
 612                 spin_unlock(&smi_info->count_lock);
 613
 614                 handle_transaction_done(smi_info);
 615                 si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
 616         }
 617         else if (si_sm_result == SI_SM_HOSED)
 618         {
 619                 spin_lock(&smi_info->count_lock);
 620                 smi_info->hosed_count++;
 621                 spin_unlock(&smi_info->count_lock);
 622
 623                 /* Do the before return_hosed_msg, because that
 624                    releases the lock. */
 625                 smi_info->si_state = SI_NORMAL;
 626                 if (smi_info->curr_msg != NULL) {
 627                         /* If we were handling a user message, format
 628                            a response to send to the upper layer to
 629                            tell it about the error. */
 630                         return_hosed_msg(smi_info);
 631                 }
 632                 si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
 633         }
 634
 635         /* We prefer handling attn over new messages. */
 636         if (si_sm_result == SI_SM_ATTN)
 637         {
 638                 unsigned char msg[2];
 639
 640                 spin_lock(&smi_info->count_lock);
 641                 smi_info->attentions++;
 642                 spin_unlock(&smi_info->count_lock);
 643
 644                 /* Got a attn, send down a get message flags to see
 645                    what's causing it.  It would be better to handle
 646                    this in the upper layer, but due to the way
 647                    interrupts work with the SMI, that's not really
 648                    possible. */
 649                 msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 650                 msg[1] = IPMI_GET_MSG_FLAGS_CMD;
 651
 652                 smi_info->handlers->start_transaction(
 653                         smi_info->si_sm, msg, 2);
 654                 smi_info->si_state = SI_GETTING_FLAGS;
 655                 goto restart;
 656         }
 657
 658         /* If we are currently idle, try to start the next message. */
 659         if (si_sm_result == SI_SM_IDLE) {
 660                 spin_lock(&smi_info->count_lock);
 661                 smi_info->idles++;
 662                 spin_unlock(&smi_info->count_lock);
 663
 664                 si_sm_result = start_next_msg(smi_info);
 665                 if (si_sm_result != SI_SM_IDLE)
 666                         goto restart;
 667         }
 668
 669         if ((si_sm_result == SI_SM_IDLE)
 670             && (atomic_read(&smi_info->req_events)))
 671         {
 672                 /* We are idle and the upper layer requested that I fetch
 673                    events, so do so. */
 674                 unsigned char msg[2];
 675
 676                 spin_lock(&smi_info->count_lock);
 677                 smi_info->flag_fetches++;
 678                 spin_unlock(&smi_info->count_lock);
 679
 680                 atomic_set(&smi_info->req_events, 0);
 681                 msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 682                 msg[1] = IPMI_GET_MSG_FLAGS_CMD;
 683
 684                 smi_info->handlers->start_transaction(
 685                         smi_info->si_sm, msg, 2);
 686                 smi_info->si_state = SI_GETTING_FLAGS;
 687                 goto restart;
 688         }
 689
 690         return si_sm_result;
 691 }
 692
 693 static void sender(void                *send_info,
 694                    struct ipmi_smi_msg *msg,
 695                    int                 priority)
 696 {
 697         struct smi_info   *smi_info = send_info;
 698         enum si_sm_result result;
 699         unsigned long     flags;
 700 #ifdef DEBUG_TIMING
 701         struct timeval    t;
 702 #endif
 703
 704         spin_lock_irqsave(&(smi_info->msg_lock), flags);
 705 #ifdef DEBUG_TIMING
 706         do_gettimeofday(&t);
 707         printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 708 #endif
 709
 710         if (smi_info->run_to_completion) {
 711                 /* If we are running to completion, then throw it in
 712                    the list and run transactions until everything is
 713                    clear.  Priority doesn't matter here. */
 714                 list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
 715
 716                 /* We have to release the msg lock and claim the smi
 717                    lock in this case, because of race conditions. */
 718                 spin_unlock_irqrestore(&(smi_info->msg_lock), flags);
 719
 720                 spin_lock_irqsave(&(smi_info->si_lock), flags);
 721                 result = smi_event_handler(smi_info, 0);
 722                 while (result != SI_SM_IDLE) {
 723                         udelay(SI_SHORT_TIMEOUT_USEC);
 724                         result = smi_event_handler(smi_info,
 725                                                    SI_SHORT_TIMEOUT_USEC);
 726                 }
 727                 spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 728                 return;
 729         } else {
 730                 if (priority > 0) {
 731                         list_add_tail(&(msg->link), &(smi_info->hp_xmit_msgs));
 732                 } else {
 733                         list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
 734                 }
 735         }
 736         spin_unlock_irqrestore(&(smi_info->msg_lock), flags);
 737
 738         spin_lock_irqsave(&(smi_info->si_lock), flags);
 739         if ((smi_info->si_state == SI_NORMAL)
 740             && (smi_info->curr_msg == NULL))
 741         {
 742                 start_next_msg(smi_info);
 743                 si_restart_short_timer(smi_info);
 744         }
 745         spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 746 }
 747
 748 static void set_run_to_completion(void *send_info, int i_run_to_completion)
 749 {
 750         struct smi_info   *smi_info = send_info;
 751         enum si_sm_result result;
 752         unsigned long     flags;
 753
 754         spin_lock_irqsave(&(smi_info->si_lock), flags);
 755
 756         smi_info->run_to_completion = i_run_to_completion;
 757         if (i_run_to_completion) {
 758                 result = smi_event_handler(smi_info, 0);
 759                 while (result != SI_SM_IDLE) {
 760                         udelay(SI_SHORT_TIMEOUT_USEC);
 761                         result = smi_event_handler(smi_info,
 762                                                    SI_SHORT_TIMEOUT_USEC);
 763                 }
 764         }
 765
 766         spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 767 }
 768
 769 static void poll(void *send_info)
 770 {
 771         struct smi_info *smi_info = send_info;
 772
 773         smi_event_handler(smi_info, 0);
 774 }
 775
 776 static void request_events(void *send_info)
 777 {
 778         struct smi_info *smi_info = send_info;
 779
 780         atomic_set(&smi_info->req_events, 1);
 781 }
 782
 783 static int initialized = 0;
 784
 785 /* Must be called with interrupts off and with the si_lock held. */
 786 static void si_restart_short_timer(struct smi_info *smi_info)
 787 {
 788 #if defined(CONFIG_HIGH_RES_TIMERS)
 789         unsigned long flags;
 790         unsigned long jiffies_now;
 791         unsigned long seq;
 792
 793         if (del_timer(&(smi_info->si_timer))) {
 794                 /* If we don't delete the timer, then it will go off
 795                    immediately, anyway.  So we only process if we
 796                    actually delete the timer. */
 797
 798                 do {
 799                         seq = read_seqbegin_irqsave(&xtime_lock, flags);
 800                         jiffies_now = jiffies;
 801                         smi_info->si_timer.expires = jiffies_now;
 802                         smi_info->si_timer.arch_cycle_expires
 803                                 = get_arch_cycles(jiffies_now);
 804                 } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
 805
 806                 add_usec_to_timer(&smi_info->si_timer, SI_SHORT_TIMEOUT_USEC);
 807
 808                 add_timer(&(smi_info->si_timer));
 809                 spin_lock_irqsave(&smi_info->count_lock, flags);
 810                 smi_info->timeout_restarts++;
 811                 spin_unlock_irqrestore(&smi_info->count_lock, flags);
 812         }
 813 #endif
 814 }
 815
 816 static void smi_timeout(unsigned long data)
 817 {
 818         struct smi_info   *smi_info = (struct smi_info *) data;
 819         enum si_sm_result smi_result;
 820         unsigned long     flags;
 821         unsigned long     jiffies_now;
 822         unsigned long     time_diff;
 823 #ifdef DEBUG_TIMING
 824         struct timeval    t;
 825 #endif
 826
 827         if (smi_info->stop_operation) {
 828                 smi_info->timer_stopped = 1;
 829                 return;
 830         }
 831
 832         spin_lock_irqsave(&(smi_info->si_lock), flags);
 833 #ifdef DEBUG_TIMING
 834         do_gettimeofday(&t);
 835         printk("**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 836 #endif
 837         jiffies_now = jiffies;
 838         time_diff = ((jiffies_now - smi_info->last_timeout_jiffies)
 839                      * SI_USEC_PER_JIFFY);
 840         smi_result = smi_event_handler(smi_info, time_diff);
 841
 842         spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 843
 844         smi_info->last_timeout_jiffies = jiffies_now;
 845
 846         if ((smi_info->irq) && (! smi_info->interrupt_disabled)) {
 847                 /* Running with interrupts, only do long timeouts. */
 848                 smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
 849                 spin_lock_irqsave(&smi_info->count_lock, flags);
 850                 smi_info->long_timeouts++;
 851                 spin_unlock_irqrestore(&smi_info->count_lock, flags);
 852                 goto do_add_timer;
 853         }
 854
 855         /* If the state machine asks for a short delay, then shorten
 856            the timer timeout. */
 857         if (smi_result == SI_SM_CALL_WITH_DELAY) {
 858 #if defined(CONFIG_HIGH_RES_TIMERS)
 859                 unsigned long seq;
 860 #endif
 861                 spin_lock_irqsave(&smi_info->count_lock, flags);
 862                 smi_info->short_timeouts++;
 863                 spin_unlock_irqrestore(&smi_info->count_lock, flags);
 864 #if defined(CONFIG_HIGH_RES_TIMERS)
 865                 do {
 866                         seq = read_seqbegin_irqsave(&xtime_lock, flags);
 867                         smi_info->si_timer.expires = jiffies;
 868                         smi_info->si_timer.arch_cycle_expires
 869                                 = get_arch_cycles(smi_info->si_timer.expires);
 870                 } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
 871                 add_usec_to_timer(&smi_info->si_timer, SI_SHORT_TIMEOUT_USEC);
 872 #else
 873                 smi_info->si_timer.expires = jiffies + 1;
 874 #endif
 875         } else {
 876                 spin_lock_irqsave(&smi_info->count_lock, flags);
 877                 smi_info->long_timeouts++;
 878                 spin_unlock_irqrestore(&smi_info->count_lock, flags);
 879                 smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
 880 #if defined(CONFIG_HIGH_RES_TIMERS)
 881                 smi_info->si_timer.arch_cycle_expires = 0;
 882 #endif
 883         }
 884
 885  do_add_timer:
 886         add_timer(&(smi_info->si_timer));
 887 }
 888
 889 static irqreturn_t si_irq_handler(int irq, void *data, struct pt_regs *regs)
 890 {
 891         struct smi_info *smi_info = data;
 892         unsigned long   flags;
 893 #ifdef DEBUG_TIMING
 894         struct timeval  t;
 895 #endif
 896
 897         spin_lock_irqsave(&(smi_info->si_lock), flags);
 898
 899         spin_lock(&smi_info->count_lock);
 900         smi_info->interrupts++;
 901         spin_unlock(&smi_info->count_lock);
 902
 903         if (smi_info->stop_operation)
 904                 goto out;
 905
 906 #ifdef DEBUG_TIMING
 907         do_gettimeofday(&t);
 908         printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 909 #endif
 910         smi_event_handler(smi_info, 0);
 911  out:
 912         spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 913         return IRQ_HANDLED;
 914 }
 915
 916 static irqreturn_t si_bt_irq_handler(int irq, void *data, struct pt_regs *regs)
 917 {
 918         struct smi_info *smi_info = data;
 919         /* We need to clear the IRQ flag for the BT interface. */
 920         smi_info->io.outputb(&smi_info->io, IPMI_BT_INTMASK_REG,
 921                              IPMI_BT_INTMASK_CLEAR_IRQ_BIT
 922                              | IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
 923         return si_irq_handler(irq, data, regs);
 924 }
 925
 926
 927 static struct ipmi_smi_handlers handlers =
 928 {
 929         .owner                  = THIS_MODULE,
 930         .sender                 = sender,
 931         .request_events         = request_events,
 932         .set_run_to_completion  = set_run_to_completion,
 933         .poll                   = poll,
 934 };
 935
 936 /* There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
 937    a default IO port, and 1 ACPI/SPMI address.  That sets SI_MAX_DRIVERS */
 938
 939 #define SI_MAX_PARMS 4
 940 #define SI_MAX_DRIVERS ((SI_MAX_PARMS * 2) + 2)
 941 static struct smi_info *smi_infos[SI_MAX_DRIVERS] =
 942 { NULL, NULL, NULL, NULL };
 943
 944 #define DEVICE_NAME "ipmi_si"
 945
 946 #define DEFAULT_KCS_IO_PORT     0xca2
 947 #define DEFAULT_SMIC_IO_PORT    0xca9
 948 #define DEFAULT_BT_IO_PORT      0xe4
 949 #define DEFAULT_REGSPACING      1
 950
 951 static int           si_trydefaults = 1;
 952 static char          *si_type[SI_MAX_PARMS];
 953 #define MAX_SI_TYPE_STR 30
 954 static char          si_type_str[MAX_SI_TYPE_STR];
 955 static unsigned long addrs[SI_MAX_PARMS];
 956 static int num_addrs;
 957 static unsigned int  ports[SI_MAX_PARMS];
 958 static int num_ports;
 959 static int           irqs[SI_MAX_PARMS];
 960 static int num_irqs;
 961 static int           regspacings[SI_MAX_PARMS];
 962 static int num_regspacings = 0;
 963 static int           regsizes[SI_MAX_PARMS];
 964 static int num_regsizes = 0;
 965 static int           regshifts[SI_MAX_PARMS];
 966 static int num_regshifts = 0;
 967 static int slave_addrs[SI_MAX_PARMS];
 968 static int num_slave_addrs = 0;
 969
 970
 971 module_param_named(trydefaults, si_trydefaults, bool, 0);
 972 MODULE_PARM_DESC(trydefaults, "Setting this to 'false' will disable the"
 973                  " default scan of the KCS and SMIC interface at the standard"
 974                  " address");
 975 module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0);
 976 MODULE_PARM_DESC(type, "Defines the type of each interface, each"
 977                  " interface separated by commas.  The types are 'kcs',"
 978                  " 'smic', and 'bt'.  For example si_type=kcs,bt will set"
 979                  " the first interface to kcs and the second to bt");
 980 module_param_array(addrs, long, &num_addrs, 0);
 981 MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the"
 982                  " addresses separated by commas.  Only use if an interface"
 983                  " is in memory.  Otherwise, set it to zero or leave"
 984                  " it blank.");
 985 module_param_array(ports, int, &num_ports, 0);
 986 MODULE_PARM_DESC(ports, "Sets the port address of each interface, the"
 987                  " addresses separated by commas.  Only use if an interface"
 988                  " is a port.  Otherwise, set it to zero or leave"
 989                  " it blank.");
 990 module_param_array(irqs, int, &num_irqs, 0);
 991 MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the"
 992                  " addresses separated by commas.  Only use if an interface"
 993                  " has an interrupt.  Otherwise, set it to zero or leave"
 994                  " it blank.");
 995 module_param_array(regspacings, int, &num_regspacings, 0);
 996 MODULE_PARM_DESC(regspacings, "The number of bytes between the start address"
 997                  " and each successive register used by the interface.  For"
 998                  " instance, if the start address is 0xca2 and the spacing"
 999                  " is 2, then the second address is at 0xca4.  Defaults"
1000                  " to 1.");
1001 module_param_array(regsizes, int, &num_regsizes, 0);
1002 MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes."
1003                  " This should generally be 1, 2, 4, or 8 for an 8-bit,"
1004                  " 16-bit, 32-bit, or 64-bit register.  Use this if you"
1005                  " the 8-bit IPMI register has to be read from a larger"
1006                  " register.");
1007 module_param_array(regshifts, int, &num_regshifts, 0);
1008 MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the."
1009                  " IPMI register, in bits.  For instance, if the data"
1010                  " is read from a 32-bit word and the IPMI data is in"
1011                  " bit 8-15, then the shift would be 8");
1012 module_param_array(slave_addrs, int, &num_slave_addrs, 0);
1013 MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for"
1014                  " the controller.  Normally this is 0x20, but can be"
1015                  " overridden by this parm.  This is an array indexed"
1016                  " by interface number.");
1017
1018
1019 #define IPMI_MEM_ADDR_SPACE 1
1020 #define IPMI_IO_ADDR_SPACE  2
1021
1022 #if defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_X86) || defined(CONFIG_PCI)
1023 static int is_new_interface(int intf, u8 addr_space, unsigned long base_addr)
1024 {
1025         int i;
1026
1027         for (i = 0; i < SI_MAX_PARMS; ++i) {
1028                 /* Don't check our address. */
1029                 if (i == intf)
1030                         continue;
1031                 if (si_type[i] != NULL) {
1032                         if ((addr_space == IPMI_MEM_ADDR_SPACE &&
1033                              base_addr == addrs[i]) ||
1034                             (addr_space == IPMI_IO_ADDR_SPACE &&
1035                              base_addr == ports[i]))
1036                                 return 0;
1037                 }
1038                 else
1039                         break;
1040         }
1041
1042         return 1;
1043 }
1044 #endif
1045
1046 static int std_irq_setup(struct smi_info *info)
1047 {
1048         int rv;
1049
1050         if (! info->irq)
1051                 return 0;
1052
1053         if (info->si_type == SI_BT) {
1054                 rv = request_irq(info->irq,
1055                                  si_bt_irq_handler,
1056                                  SA_INTERRUPT,
1057                                  DEVICE_NAME,
1058                                  info);
1059                 if (! rv)
1060                         /* Enable the interrupt in the BT interface. */
1061                         info->io.outputb(&info->io, IPMI_BT_INTMASK_REG,
1062                                          IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
1063         } else
1064                 rv = request_irq(info->irq,
1065                                  si_irq_handler,
1066                                  SA_INTERRUPT,
1067                                  DEVICE_NAME,
1068                                  info);
1069         if (rv) {
1070                 printk(KERN_WARNING
1071                        "ipmi_si: %s unable to claim interrupt %d,"
1072                        " running polled\n",
1073                        DEVICE_NAME, info->irq);
1074                 info->irq = 0;
1075         } else {
1076                 printk("  Using irq %d\n", info->irq);
1077         }
1078
1079         return rv;
1080 }
1081
1082 static void std_irq_cleanup(struct smi_info *info)
1083 {
1084         if (! info->irq)
1085                 return;
1086
1087         if (info->si_type == SI_BT)
1088                 /* Disable the interrupt in the BT interface. */
1089                 info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0);
1090         free_irq(info->irq, info);
1091 }
1092
1093 static unsigned char port_inb(struct si_sm_io *io, unsigned int offset)
1094 {
1095         unsigned int *addr = io->info;
1096
1097         return inb((*addr)+(offset*io->regspacing));
1098 }
1099
1100 static void port_outb(struct si_sm_io *io, unsigned int offset,
1101                       unsigned char b)
1102 {
1103         unsigned int *addr = io->info;
1104
1105         outb(b, (*addr)+(offset * io->regspacing));
1106 }
1107
1108 static unsigned char port_inw(struct si_sm_io *io, unsigned int offset)
1109 {
1110         unsigned int *addr = io->info;
1111
1112         return (inw((*addr)+(offset * io->regspacing)) >> io->regshift) & 0xff;
1113 }
1114
1115 static void port_outw(struct si_sm_io *io, unsigned int offset,
1116                       unsigned char b)
1117 {
1118         unsigned int *addr = io->info;
1119
1120         outw(b << io->regshift, (*addr)+(offset * io->regspacing));
1121 }
1122
1123 static unsigned char port_inl(struct si_sm_io *io, unsigned int offset)
1124 {
1125         unsigned int *addr = io->info;
1126
1127         return (inl((*addr)+(offset * io->regspacing)) >> io->regshift) & 0xff;
1128 }
1129
1130 static void port_outl(struct si_sm_io *io, unsigned int offset,
1131                       unsigned char b)
1132 {
1133         unsigned int *addr = io->info;
1134
1135         outl(b << io->regshift, (*addr)+(offset * io->regspacing));
1136 }
1137
1138 static void port_cleanup(struct smi_info *info)
1139 {
1140         unsigned int *addr = info->io.info;
1141         int           mapsize;
1142
1143         if (addr && (*addr)) {
1144                 mapsize = ((info->io_size * info->io.regspacing)
1145                            - (info->io.regspacing - info->io.regsize));
1146
1147                 release_region (*addr, mapsize);
1148         }
1149         kfree(info);
1150 }
1151
1152 static int port_setup(struct smi_info *info)
1153 {
1154         unsigned int *addr = info->io.info;
1155         int           mapsize;
1156
1157         if (! addr || (! *addr))
1158                 return -ENODEV;
1159
1160         info->io_cleanup = port_cleanup;
1161
1162         /* Figure out the actual inb/inw/inl/etc routine to use based
1163            upon the register size. */
1164         switch (info->io.regsize) {
1165         case 1:
1166                 info->io.inputb = port_inb;
1167                 info->io.outputb = port_outb;
1168                 break;
1169         case 2:
1170                 info->io.inputb = port_inw;
1171                 info->io.outputb = port_outw;
1172                 break;
1173         case 4:
1174                 info->io.inputb = port_inl;
1175                 info->io.outputb = port_outl;
1176                 break;
1177         default:
1178                 printk("ipmi_si: Invalid register size: %d\n",
1179                        info->io.regsize);
1180                 return -EINVAL;
1181         }
1182
1183         /* Calculate the total amount of memory to claim.  This is an
1184          * unusual looking calculation, but it avoids claiming any
1185          * more memory than it has to.  It will claim everything
1186          * between the first address to the end of the last full
1187          * register. */
1188         mapsize = ((info->io_size * info->io.regspacing)
1189                    - (info->io.regspacing - info->io.regsize));
1190
1191         if (request_region(*addr, mapsize, DEVICE_NAME) == NULL)
1192                 return -EIO;
1193         return 0;
1194 }
1195
1196 static int try_init_port(int intf_num, struct smi_info **new_info)
1197 {
1198         struct smi_info *info;
1199
1200         if (! ports[intf_num])
1201                 return -ENODEV;
1202
1203         if (! is_new_interface(intf_num, IPMI_IO_ADDR_SPACE,
1204                               ports[intf_num]))
1205                 return -ENODEV;
1206
1207         info = kmalloc(sizeof(*info), GFP_KERNEL);
1208         if (! info) {
1209                 printk(KERN_ERR "ipmi_si: Could not allocate SI data (1)\n");
1210                 return -ENOMEM;
1211         }
1212         memset(info, 0, sizeof(*info));
1213
1214         info->io_setup = port_setup;
1215         info->io.info = &(ports[intf_num]);
1216         info->io.addr = NULL;
1217         info->io.regspacing = regspacings[intf_num];
1218         if (! info->io.regspacing)
1219                 info->io.regspacing = DEFAULT_REGSPACING;
1220         info->io.regsize = regsizes[intf_num];
1221         if (! info->io.regsize)
1222                 info->io.regsize = DEFAULT_REGSPACING;
1223         info->io.regshift = regshifts[intf_num];
1224         info->irq = 0;
1225         info->irq_setup = NULL;
1226         *new_info = info;
1227
1228         if (si_type[intf_num] == NULL)
1229                 si_type[intf_num] = "kcs";
1230
1231         printk("ipmi_si: Trying \"%s\" at I/O port 0x%x\n",
1232                si_type[intf_num], ports[intf_num]);
1233         return 0;
1234 }
1235
1236 static unsigned char mem_inb(struct si_sm_io *io, unsigned int offset)
1237 {
1238         return readb((io->addr)+(offset * io->regspacing));
1239 }
1240
1241 static void mem_outb(struct si_sm_io *io, unsigned int offset,
1242                      unsigned char b)
1243 {
1244         writeb(b, (io->addr)+(offset * io->regspacing));
1245 }
1246
1247 static unsigned char mem_inw(struct si_sm_io *io, unsigned int offset)
1248 {
1249         return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift)
1250                 && 0xff;
1251 }
1252
1253 static void mem_outw(struct si_sm_io *io, unsigned int offset,
1254                      unsigned char b)
1255 {
1256         writeb(b << io->regshift, (io->addr)+(offset * io->regspacing));
1257 }
1258
1259 static unsigned char mem_inl(struct si_sm_io *io, unsigned int offset)
1260 {
1261         return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift)
1262                 && 0xff;
1263 }
1264
1265 static void mem_outl(struct si_sm_io *io, unsigned int offset,
1266                      unsigned char b)
1267 {
1268         writel(b << io->regshift, (io->addr)+(offset * io->regspacing));
1269 }
1270
1271 #ifdef readq
1272 static unsigned char mem_inq(struct si_sm_io *io, unsigned int offset)
1273 {
1274         return (readq((io->addr)+(offset * io->regspacing)) >> io->regshift)
1275                 && 0xff;
1276 }
1277
1278 static void mem_outq(struct si_sm_io *io, unsigned int offset,
1279                      unsigned char b)
1280 {
1281         writeq(b << io->regshift, (io->addr)+(offset * io->regspacing));
1282 }
1283 #endif
1284
1285 static void mem_cleanup(struct smi_info *info)
1286 {
1287         unsigned long *addr = info->io.info;
1288         int           mapsize;
1289
1290         if (info->io.addr) {
1291                 iounmap(info->io.addr);
1292
1293                 mapsize = ((info->io_size * info->io.regspacing)
1294                            - (info->io.regspacing - info->io.regsize));
1295
1296                 release_mem_region(*addr, mapsize);
1297         }
1298         kfree(info);
1299 }
1300
1301 static int mem_setup(struct smi_info *info)
1302 {
1303         unsigned long *addr = info->io.info;
1304         int           mapsize;
1305
1306         if (! addr || (! *addr))
1307                 return -ENODEV;
1308
1309         info->io_cleanup = mem_cleanup;
1310
1311         /* Figure out the actual readb/readw/readl/etc routine to use based
1312            upon the register size. */
1313         switch (info->io.regsize) {
1314         case 1:
1315                 info->io.inputb = mem_inb;
1316                 info->io.outputb = mem_outb;
1317                 break;
1318         case 2:
1319                 info->io.inputb = mem_inw;
1320                 info->io.outputb = mem_outw;
1321                 break;
1322         case 4:
1323                 info->io.inputb = mem_inl;
1324                 info->io.outputb = mem_outl;
1325                 break;
1326 #ifdef readq
1327         case 8:
1328                 info->io.inputb = mem_inq;
1329                 info->io.outputb = mem_outq;
1330                 break;
1331 #endif
1332         default:
1333                 printk("ipmi_si: Invalid register size: %d\n",
1334                        info->io.regsize);
1335                 return -EINVAL;
1336         }
1337
1338         /* Calculate the total amount of memory to claim.  This is an
1339          * unusual looking calculation, but it avoids claiming any
1340          * more memory than it has to.  It will claim everything
1341          * between the first address to the end of the last full
1342          * register. */
1343         mapsize = ((info->io_size * info->io.regspacing)
1344                    - (info->io.regspacing - info->io.regsize));
1345
1346         if (request_mem_region(*addr, mapsize, DEVICE_NAME) == NULL)
1347                 return -EIO;
1348
1349         info->io.addr = ioremap(*addr, mapsize);
1350         if (info->io.addr == NULL) {
1351                 release_mem_region(*addr, mapsize);
1352                 return -EIO;
1353         }
1354         return 0;
1355 }
1356
1357 static int try_init_mem(int intf_num, struct smi_info **new_info)
1358 {
1359         struct smi_info *info;
1360
1361         if (! addrs[intf_num])
1362                 return -ENODEV;
1363
1364         if (! is_new_interface(intf_num, IPMI_MEM_ADDR_SPACE,
1365                               addrs[intf_num]))
1366                 return -ENODEV;
1367
1368         info = kmalloc(sizeof(*info), GFP_KERNEL);
1369         if (! info) {
1370                 printk(KERN_ERR "ipmi_si: Could not allocate SI data (2)\n");
1371                 return -ENOMEM;
1372         }
1373         memset(info, 0, sizeof(*info));
1374
1375         info->io_setup = mem_setup;
1376         info->io.info = &addrs[intf_num];
1377         info->io.addr = NULL;
1378         info->io.regspacing = regspacings[intf_num];
1379         if (! info->io.regspacing)
1380                 info->io.regspacing = DEFAULT_REGSPACING;
1381         info->io.regsize = regsizes[intf_num];
1382         if (! info->io.regsize)
1383                 info->io.regsize = DEFAULT_REGSPACING;
1384         info->io.regshift = regshifts[intf_num];
1385         info->irq = 0;
1386         info->irq_setup = NULL;
1387         *new_info = info;
1388
1389         if (si_type[intf_num] == NULL)
1390                 si_type[intf_num] = "kcs";
1391
1392         printk("ipmi_si: Trying \"%s\" at memory address 0x%lx\n",
1393                si_type[intf_num], addrs[intf_num]);
1394         return 0;
1395 }
1396
1397
1398 #ifdef CONFIG_ACPI_INTERPRETER
1399
1400 #include <linux/acpi.h>
1401
1402 /* Once we get an ACPI failure, we don't try any more, because we go
1403    through the tables sequentially.  Once we don't find a table, there
1404    are no more. */
1405 static int acpi_failure = 0;
1406
1407 /* For GPE-type interrupts. */
1408 static u32 ipmi_acpi_gpe(void *context)
1409 {
1410         struct smi_info *smi_info = context;
1411         unsigned long   flags;
1412 #ifdef DEBUG_TIMING
1413         struct timeval t;
1414 #endif
1415
1416         spin_lock_irqsave(&(smi_info->si_lock), flags);
1417
1418         spin_lock(&smi_info->count_lock);
1419         smi_info->interrupts++;
1420         spin_unlock(&smi_info->count_lock);
1421
1422         if (smi_info->stop_operation)
1423                 goto out;
1424
1425 #ifdef DEBUG_TIMING
1426         do_gettimeofday(&t);
1427         printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec);
1428 #endif
1429         smi_event_handler(smi_info, 0);
1430  out:
1431         spin_unlock_irqrestore(&(smi_info->si_lock), flags);
1432
1433         return ACPI_INTERRUPT_HANDLED;
1434 }
1435
1436 static int acpi_gpe_irq_setup(struct smi_info *info)
1437 {
1438         acpi_status status;
1439
1440         if (! info->irq)
1441                 return 0;
1442
1443         /* FIXME - is level triggered right? */
1444         status = acpi_install_gpe_handler(NULL,
1445                                           info->irq,
1446                                           ACPI_GPE_LEVEL_TRIGGERED,
1447                                           &ipmi_acpi_gpe,
1448                                           info);
1449         if (status != AE_OK) {
1450                 printk(KERN_WARNING
1451                        "ipmi_si: %s unable to claim ACPI GPE %d,"
1452                        " running polled\n",
1453                        DEVICE_NAME, info->irq);
1454                 info->irq = 0;
1455                 return -EINVAL;
1456         } else {
1457                 printk("  Using ACPI GPE %d\n", info->irq);
1458                 return 0;
1459         }
1460 }
1461
1462 static void acpi_gpe_irq_cleanup(struct smi_info *info)
1463 {
1464         if (! info->irq)
1465                 return;
1466
1467         acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe);
1468 }
1469
1470 /*
1471  * Defined at
1472  * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf
1473  */
1474 struct SPMITable {
1475         s8      Signature[4];
1476         u32     Length;
1477         u8      Revision;
1478         u8      Checksum;
1479         s8      OEMID[6];
1480         s8      OEMTableID[8];
1481         s8      OEMRevision[4];
1482         s8      CreatorID[4];
1483         s8      CreatorRevision[4];
1484         u8      InterfaceType;
1485         u8      IPMIlegacy;
1486         s16     SpecificationRevision;
1487
1488         /*
1489          * Bit 0 - SCI interrupt supported
1490          * Bit 1 - I/O APIC/SAPIC
1491          */
1492         u8      InterruptType;
1493
1494         /* If bit 0 of InterruptType is set, then this is the SCI
1495            interrupt in the GPEx_STS register. */
1496         u8      GPE;
1497
1498         s16     Reserved;
1499
1500         /* If bit 1 of InterruptType is set, then this is the I/O
1501            APIC/SAPIC interrupt. */
1502         u32     GlobalSystemInterrupt;
1503
1504         /* The actual register address. */
1505         struct acpi_generic_address addr;
1506
1507         u8      UID[4];
1508
1509         s8      spmi_id[1]; /* A '\0' terminated array starts here. */
1510 };
1511
1512 static int try_init_acpi(int intf_num, struct smi_info **new_info)
1513 {
1514         struct smi_info  *info;
1515         acpi_status      status;
1516         struct SPMITable *spmi;
1517         char             *io_type;
1518         u8               addr_space;
1519
1520         if (acpi_failure)
1521                 return -ENODEV;
1522
1523         status = acpi_get_firmware_table("SPMI", intf_num+1,
1524                                          ACPI_LOGICAL_ADDRESSING,
1525                                          (struct acpi_table_header **) &spmi);
1526         if (status != AE_OK) {
1527                 acpi_failure = 1;
1528                 return -ENODEV;
1529         }
1530
1531         if (spmi->IPMIlegacy != 1) {
1532             printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy);
1533             return -ENODEV;
1534         }
1535
1536         if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
1537                 addr_space = IPMI_MEM_ADDR_SPACE;
1538         else
1539                 addr_space = IPMI_IO_ADDR_SPACE;
1540         if (! is_new_interface(-1, addr_space, spmi->addr.address))
1541                 return -ENODEV;
1542
1543         if (! spmi->addr.register_bit_width) {
1544                 acpi_failure = 1;
1545                 return -ENODEV;
1546         }
1547
1548         /* Figure out the interface type. */
1549         switch (spmi->InterfaceType)
1550         {
1551         case 1: /* KCS */
1552                 si_type[intf_num] = "kcs";
1553                 break;
1554
1555         case 2: /* SMIC */
1556                 si_type[intf_num] = "smic";
1557                 break;
1558
1559         case 3: /* BT */
1560                 si_type[intf_num] = "bt";
1561                 break;
1562
1563         default:
1564                 printk(KERN_INFO "ipmi_si: Unknown ACPI/SPMI SI type %d\n",
1565                         spmi->InterfaceType);
1566                 return -EIO;
1567         }
1568
1569         info = kmalloc(sizeof(*info), GFP_KERNEL);
1570         if (! info) {
1571                 printk(KERN_ERR "ipmi_si: Could not allocate SI data (3)\n");
1572                 return -ENOMEM;
1573         }
1574         memset(info, 0, sizeof(*info));
1575
1576         if (spmi->InterruptType & 1) {
1577                 /* We've got a GPE interrupt. */
1578                 info->irq = spmi->GPE;
1579                 info->irq_setup = acpi_gpe_irq_setup;
1580                 info->irq_cleanup = acpi_gpe_irq_cleanup;
1581         } else if (spmi->InterruptType & 2) {
1582                 /* We've got an APIC/SAPIC interrupt. */
1583                 info->irq = spmi->GlobalSystemInterrupt;
1584                 info->irq_setup = std_irq_setup;
1585                 info->irq_cleanup = std_irq_cleanup;
1586         } else {
1587                 /* Use the default interrupt setting. */
1588                 info->irq = 0;
1589                 info->irq_setup = NULL;
1590         }
1591
1592         if (spmi->addr.register_bit_width) {
1593                 /* A (hopefully) properly formed register bit width. */
1594                 regspacings[intf_num] = spmi->addr.register_bit_width / 8;
1595                 info->io.regspacing = spmi->addr.register_bit_width / 8;
1596         } else {
1597                 /* Some broken systems get this wrong and set the value
1598                  * to zero.  Assume it is the default spacing.  If that
1599                  * is wrong, too bad, the vendor should fix the tables. */
1600                 regspacings[intf_num] = DEFAULT_REGSPACING;
1601                 info->io.regspacing = DEFAULT_REGSPACING;
1602         }
1603         regsizes[intf_num] = regspacings[intf_num];
1604         info->io.regsize = regsizes[intf_num];
1605         regshifts[intf_num] = spmi->addr.register_bit_offset;
1606         info->io.regshift = regshifts[intf_num];
1607
1608         if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
1609                 io_type = "memory";
1610                 info->io_setup = mem_setup;
1611                 addrs[intf_num] = spmi->addr.address;
1612                 info->io.info = &(addrs[intf_num]);
1613         } else if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
1614                 io_type = "I/O";
1615                 info->io_setup = port_setup;
1616                 ports[intf_num] = spmi->addr.address;
1617                 info->io.info = &(ports[intf_num]);
1618         } else {
1619                 kfree(info);
1620                 printk("ipmi_si: Unknown ACPI I/O Address type\n");
1621                 return -EIO;
1622         }
1623
1624         *new_info = info;
1625
1626         printk("ipmi_si: ACPI/SPMI specifies \"%s\" %s SI @ 0x%lx\n",
1627                si_type[intf_num], io_type, (unsigned long) spmi->addr.address);
1628         return 0;
1629 }
1630 #endif
1631
1632 #ifdef CONFIG_X86
1633 typedef struct dmi_ipmi_data
1634 {
1635         u8              type;
1636         u8              addr_space;
1637         unsigned long   base_addr;
1638         u8              irq;
1639         u8              offset;
1640         u8              slave_addr;
1641 } dmi_ipmi_data_t;
1642
1643 static dmi_ipmi_data_t dmi_data[SI_MAX_DRIVERS];
1644 static int dmi_data_entries;
1645
1646 static int __init decode_dmi(struct dmi_header *dm, int intf_num)
1647 {
1648         u8              *data = (u8 *)dm;
1649         unsigned long   base_addr;
1650         u8              reg_spacing;
1651         u8              len = dm->length;
1652         dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num;
1653
1654         ipmi_data->type = data[4];
1655
1656         memcpy(&base_addr, data+8, sizeof(unsigned long));
1657         if (len >= 0x11) {
1658                 if (base_addr & 1) {
1659                         /* I/O */
1660                         base_addr &= 0xFFFE;
1661                         ipmi_data->addr_space = IPMI_IO_ADDR_SPACE;
1662                 }
1663                 else {
1664                         /* Memory */
1665                         ipmi_data->addr_space = IPMI_MEM_ADDR_SPACE;
1666                 }
1667                 /* If bit 4 of byte 0x10 is set, then the lsb for the address
1668                    is odd. */
1669                 ipmi_data->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
1670
1671                 ipmi_data->irq = data[0x11];
1672
1673                 /* The top two bits of byte 0x10 hold the register spacing. */
1674                 reg_spacing = (data[0x10] & 0xC0) >> 6;
1675                 switch(reg_spacing){
1676                 case 0x00: /* Byte boundaries */
1677                     ipmi_data->offset = 1;
1678                     break;
1679                 case 0x01: /* 32-bit boundaries */
1680                     ipmi_data->offset = 4;
1681                     break;
1682                 case 0x02: /* 16-byte boundaries */
1683                     ipmi_data->offset = 16;
1684                     break;
1685                 default:
1686                     /* Some other interface, just ignore it. */
1687                     return -EIO;
1688                 }
1689         } else {
1690                 /* Old DMI spec. */
1691                 /* Note that technically, the lower bit of the base
1692                  * address should be 1 if the address is I/O and 0 if
1693                  * the address is in memory.  So many systems get that
1694                  * wrong (and all that I have seen are I/O) so we just
1695                  * ignore that bit and assume I/O.  Systems that use
1696                  * memory should use the newer spec, anyway. */
1697                 ipmi_data->base_addr = base_addr & 0xfffe;
1698                 ipmi_data->addr_space = IPMI_IO_ADDR_SPACE;
1699                 ipmi_data->offset = 1;
1700         }
1701
1702         ipmi_data->slave_addr = data[6];
1703
1704         if (is_new_interface(-1, ipmi_data->addr_space,ipmi_data->base_addr)) {
1705                 dmi_data_entries++;
1706                 return 0;
1707         }
1708
1709         memset(ipmi_data, 0, sizeof(dmi_ipmi_data_t));
1710
1711         return -1;
1712 }
1713
1714 static void __init dmi_find_bmc(void)
1715 {
1716         struct dmi_device *dev = NULL;
1717         int               intf_num = 0;
1718
1719         while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) {
1720                 if (intf_num >= SI_MAX_DRIVERS)
1721                         break;
1722
1723                 decode_dmi((struct dmi_header *) dev->device_data, intf_num++);
1724         }
1725 }
1726
1727 static int try_init_smbios(int intf_num, struct smi_info **new_info)
1728 {
1729         struct smi_info *info;
1730         dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num;
1731         char            *io_type;
1732
1733         if (intf_num >= dmi_data_entries)
1734                 return -ENODEV;
1735
1736         switch (ipmi_data->type) {
1737                 case 0x01: /* KCS */
1738                         si_type[intf_num] = "kcs";
1739                         break;
1740                 case 0x02: /* SMIC */
1741                         si_type[intf_num] = "smic";
1742                         break;
1743                 case 0x03: /* BT */
1744                         si_type[intf_num] = "bt";
1745                         break;
1746                 default:
1747                         return -EIO;
1748         }
1749
1750         info = kmalloc(sizeof(*info), GFP_KERNEL);
1751         if (! info) {
1752                 printk(KERN_ERR "ipmi_si: Could not allocate SI data (4)\n");
1753                 return -ENOMEM;
1754         }
1755         memset(info, 0, sizeof(*info));
1756
1757         if (ipmi_data->addr_space == 1) {
1758                 io_type = "memory";
1759                 info->io_setup = mem_setup;
1760                 addrs[intf_num] = ipmi_data->base_addr;
1761                 info->io.info = &(addrs[intf_num]);
1762         } else if (ipmi_data->addr_space == 2) {
1763                 io_type = "I/O";
1764                 info->io_setup = port_setup;
1765                 ports[intf_num] = ipmi_data->base_addr;
1766                 info->io.info = &(ports[intf_num]);
1767         } else {
1768                 kfree(info);
1769                 printk("ipmi_si: Unknown SMBIOS I/O Address type.\n");
1770                 return -EIO;
1771         }
1772
1773         regspacings[intf_num] = ipmi_data->offset;
1774         info->io.regspacing = regspacings[intf_num];
1775         if (! info->io.regspacing)
1776                 info->io.regspacing = DEFAULT_REGSPACING;
1777         info->io.regsize = DEFAULT_REGSPACING;
1778         info->io.regshift = regshifts[intf_num];
1779
1780         info->slave_addr = ipmi_data->slave_addr;
1781
1782         irqs[intf_num] = ipmi_data->irq;
1783
1784         *new_info = info;
1785
1786         printk("ipmi_si: Found SMBIOS-specified state machine at %s"
1787                " address 0x%lx, slave address 0x%x\n",
1788                io_type, (unsigned long)ipmi_data->base_addr,
1789                ipmi_data->slave_addr);
1790         return 0;
1791 }
1792 #endif /* CONFIG_X86 */
1793
1794 #ifdef CONFIG_PCI
1795
1796 #define PCI_ERMC_CLASSCODE  0x0C0700
1797 #define PCI_HP_VENDOR_ID    0x103C
1798 #define PCI_MMC_DEVICE_ID   0x121A
1799 #define PCI_MMC_ADDR_CW     0x10
1800
1801 /* Avoid more than one attempt to probe pci smic. */
1802 static int pci_smic_checked = 0;
1803
1804 static int find_pci_smic(int intf_num, struct smi_info **new_info)
1805 {
1806         struct smi_info  *info;
1807         int              error;
1808         struct pci_dev   *pci_dev = NULL;
1809         u16              base_addr;
1810         int              fe_rmc = 0;
1811
1812         if (pci_smic_checked)
1813                 return -ENODEV;
1814
1815         pci_smic_checked = 1;
1816
1817         pci_dev = pci_get_device(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID, NULL);
1818         if (! pci_dev) {
1819                 pci_dev = pci_get_class(PCI_ERMC_CLASSCODE, NULL);
1820                 if (pci_dev && (pci_dev->subsystem_vendor == PCI_HP_VENDOR_ID))
1821                         fe_rmc = 1;
1822                 else
1823                         return -ENODEV;
1824         }
1825
1826         error = pci_read_config_word(pci_dev, PCI_MMC_ADDR_CW, &base_addr);
1827         if (error)
1828         {
1829                 pci_dev_put(pci_dev);
1830                 printk(KERN_ERR
1831                        "ipmi_si: pci_read_config_word() failed (%d).\n",
1832                        error);
1833                 return -ENODEV;
1834         }
1835
1836         /* Bit 0: 1 specifies programmed I/O, 0 specifies memory mapped I/O */
1837         if (! (base_addr & 0x0001))
1838         {
1839                 pci_dev_put(pci_dev);
1840                 printk(KERN_ERR
1841                        "ipmi_si: memory mapped I/O not supported for PCI"
1842                        " smic.\n");
1843                 return -ENODEV;
1844         }
1845
1846         base_addr &= 0xFFFE;
1847         if (! fe_rmc)
1848                 /* Data register starts at base address + 1 in eRMC */
1849                 ++base_addr;
1850
1851         if (! is_new_interface(-1, IPMI_IO_ADDR_SPACE, base_addr)) {
1852                 pci_dev_put(pci_dev);
1853                 return -ENODEV;
1854         }
1855
1856         info = kmalloc(sizeof(*info), GFP_KERNEL);
1857         if (! info) {
1858                 pci_dev_put(pci_dev);
1859                 printk(KERN_ERR "ipmi_si: Could not allocate SI data (5)\n");
1860                 return -ENOMEM;
1861         }
1862         memset(info, 0, sizeof(*info));
1863
1864         info->io_setup = port_setup;
1865         ports[intf_num] = base_addr;
1866         info->io.info = &(ports[intf_num]);
1867         info->io.regspacing = regspacings[intf_num];
1868         if (! info->io.regspacing)
1869                 info->io.regspacing = DEFAULT_REGSPACING;
1870         info->io.regsize = DEFAULT_REGSPACING;
1871         info->io.regshift = regshifts[intf_num];
1872
1873         *new_info = info;
1874
1875         irqs[intf_num] = pci_dev->irq;
1876         si_type[intf_num] = "smic";
1877
1878         printk("ipmi_si: Found PCI SMIC at I/O address 0x%lx\n",
1879                 (long unsigned int) base_addr);
1880
1881         pci_dev_put(pci_dev);
1882         return 0;
1883 }
1884 #endif /* CONFIG_PCI */
1885
1886 static int try_init_plug_and_play(int intf_num, struct smi_info **new_info)
1887 {
1888 #ifdef CONFIG_PCI
1889         if (find_pci_smic(intf_num, new_info) == 0)
1890                 return 0;
1891 #endif
1892         /* Include other methods here. */
1893
1894         return -ENODEV;
1895 }
1896
1897
1898 static int try_get_dev_id(struct smi_info *smi_info)
1899 {
1900         unsigned char      msg[2];
1901         unsigned char      *resp;
1902         unsigned long      resp_len;
1903         enum si_sm_result smi_result;
1904         int               rv = 0;
1905
1906         resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
1907         if (! resp)
1908                 return -ENOMEM;
1909
1910         /* Do a Get Device ID command, since it comes back with some
1911            useful info. */
1912         msg[0] = IPMI_NETFN_APP_REQUEST << 2;
1913         msg[1] = IPMI_GET_DEVICE_ID_CMD;
1914         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
1915
1916         smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
1917         for (;;)
1918         {
1919                 if (smi_result == SI_SM_CALL_WITH_DELAY) {
1920                         set_current_state(TASK_UNINTERRUPTIBLE);
1921                         schedule_timeout(1);
1922                         smi_result = smi_info->handlers->event(
1923                                 smi_info->si_sm, 100);
1924                 }
1925                 else if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
1926                 {
1927                         smi_result = smi_info->handlers->event(
1928                                 smi_info->si_sm, 0);
1929                 }
1930                 else
1931                         break;
1932         }
1933         if (smi_result == SI_SM_HOSED) {
1934                 /* We couldn't get the state machine to run, so whatever's at
1935                    the port is probably not an IPMI SMI interface. */
1936                 rv = -ENODEV;
1937                 goto out;
1938         }
1939
1940         /* Otherwise, we got some data. */
1941         resp_len = smi_info->handlers->get_result(smi_info->si_sm,
1942                                                   resp, IPMI_MAX_MSG_LENGTH);
1943         if (resp_len < 6) {
1944                 /* That's odd, it should be longer. */
1945                 rv = -EINVAL;
1946                 goto out;
1947         }
1948
1949         if ((resp[1] != IPMI_GET_DEVICE_ID_CMD) || (resp[2] != 0)) {
1950                 /* That's odd, it shouldn't be able to fail. */
1951                 rv = -EINVAL;
1952                 goto out;
1953         }
1954
1955         /* Record info from the get device id, in case we need it. */
1956         memcpy(&smi_info->device_id, &resp[3],
1957                min_t(unsigned long, resp_len-3, sizeof(smi_info->device_id)));
1958
1959  out:
1960         kfree(resp);
1961         return rv;
1962 }
1963
1964 static int type_file_read_proc(char *page, char **start, off_t off,
1965                                int count, int *eof, void *data)
1966 {
1967         char            *out = (char *) page;
1968         struct smi_info *smi = data;
1969
1970         switch (smi->si_type) {
1971             case SI_KCS:
1972                 return sprintf(out, "kcs\n");
1973             case SI_SMIC:
1974                 return sprintf(out, "smic\n");
1975             case SI_BT:
1976                 return sprintf(out, "bt\n");
1977             default:
1978                 return 0;
1979         }
1980 }
1981
1982 static int stat_file_read_proc(char *page, char **start, off_t off,
1983                                int count, int *eof, void *data)
1984 {
1985         char            *out = (char *) page;
1986         struct smi_info *smi = data;
1987
1988         out += sprintf(out, "interrupts_enabled:    %d\n",
1989                        smi->irq && ! smi->interrupt_disabled);
1990         out += sprintf(out, "short_timeouts:        %ld\n",
1991                        smi->short_timeouts);
1992         out += sprintf(out, "long_timeouts:         %ld\n",
1993                        smi->long_timeouts);
1994         out += sprintf(out, "timeout_restarts:      %ld\n",
1995                        smi->timeout_restarts);
1996         out += sprintf(out, "idles:                 %ld\n",
1997                        smi->idles);
1998         out += sprintf(out, "interrupts:            %ld\n",
1999                        smi->interrupts);
2000         out += sprintf(out, "attentions:            %ld\n",
2001                        smi->attentions);
2002         out += sprintf(out, "flag_fetches:          %ld\n",
2003                        smi->flag_fetches);
2004         out += sprintf(out, "hosed_count:           %ld\n",
2005                        smi->hosed_count);
2006         out += sprintf(out, "complete_transactions: %ld\n",
2007                        smi->complete_transactions);
2008         out += sprintf(out, "events:                %ld\n",
2009                        smi->events);
2010         out += sprintf(out, "watchdog_pretimeouts:  %ld\n",
2011                        smi->watchdog_pretimeouts);
2012         out += sprintf(out, "incoming_messages:     %ld\n",
2013                        smi->incoming_messages);
2014
2015         return (out - ((char *) page));
2016 }
2017
2018 /*
2019  * oem_data_avail_to_receive_msg_avail
2020  * @info - smi_info structure with msg_flags set
2021  *
2022  * Converts flags from OEM_DATA_AVAIL to RECEIVE_MSG_AVAIL
2023  * Returns 1 indicating need to re-run handle_flags().
2024  */
2025 static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info)
2026 {
2027         smi_info->msg_flags = ((smi_info->msg_flags & ~OEM_DATA_AVAIL) |
2028                                 RECEIVE_MSG_AVAIL);
2029         return 1;
2030 }
2031
2032 /*
2033  * setup_dell_poweredge_oem_data_handler
2034  * @info - smi_info.device_id must be populated
2035  *
2036  * Systems that match, but have firmware version < 1.40 may assert
2037  * OEM0_DATA_AVAIL on their own, without being told via Set Flags that
2038  * it's safe to do so.  Such systems will de-assert OEM1_DATA_AVAIL
2039  * upon receipt of IPMI_GET_MSG_CMD, so we should treat these flags
2040  * as RECEIVE_MSG_AVAIL instead.
2041  *
2042  * As Dell has no plans to release IPMI 1.5 firmware that *ever*
2043  * assert the OEM[012] bits, and if it did, the driver would have to
2044  * change to handle that properly, we don't actually check for the
2045  * firmware version.
2046  * Device ID = 0x20                BMC on PowerEdge 8G servers
2047  * Device Revision = 0x80
2048  * Firmware Revision1 = 0x01       BMC version 1.40
2049  * Firmware Revision2 = 0x40       BCD encoded
2050  * IPMI Version = 0x51             IPMI 1.5
2051  * Manufacturer ID = A2 02 00      Dell IANA
2052  *
2053  */
2054 #define DELL_POWEREDGE_8G_BMC_DEVICE_ID  0x20
2055 #define DELL_POWEREDGE_8G_BMC_DEVICE_REV 0x80
2056 #define DELL_POWEREDGE_8G_BMC_IPMI_VERSION 0x51
2057 #define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00}
2058 static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info)
2059 {
2060         struct ipmi_device_id *id = &smi_info->device_id;
2061         const char mfr[3]=DELL_IANA_MFR_ID;
2062         if (! memcmp(mfr, id->manufacturer_id, sizeof(mfr))
2063             && (id->device_id       == DELL_POWEREDGE_8G_BMC_DEVICE_ID)
2064             && (id->device_revision == DELL_POWEREDGE_8G_BMC_DEVICE_REV)
2065             && (id->ipmi_version    == DELL_POWEREDGE_8G_BMC_IPMI_VERSION))
2066         {
2067                 smi_info->oem_data_avail_handler =
2068                         oem_data_avail_to_receive_msg_avail;
2069         }
2070 }
2071
2072 /*
2073  * setup_oem_data_handler
2074  * @info - smi_info.device_id must be filled in already
2075  *
2076  * Fills in smi_info.device_id.oem_data_available_handler
2077  * when we know what function to use there.
2078  */
2079
2080 static void setup_oem_data_handler(struct smi_info *smi_info)
2081 {
2082         setup_dell_poweredge_oem_data_handler(smi_info);
2083 }
2084
2085 /* Returns 0 if initialized, or negative on an error. */
2086 static int init_one_smi(int intf_num, struct smi_info **smi)
2087 {
2088         int             rv;
2089         struct smi_info *new_smi;
2090
2091
2092         rv = try_init_mem(intf_num, &new_smi);
2093         if (rv)
2094                 rv = try_init_port(intf_num, &new_smi);
2095 #ifdef CONFIG_ACPI_INTERPRETER
2096         if (rv && si_trydefaults)
2097                 rv = try_init_acpi(intf_num, &new_smi);
2098 #endif
2099 #ifdef CONFIG_X86
2100         if (rv && si_trydefaults)
2101                 rv = try_init_smbios(intf_num, &new_smi);
2102 #endif
2103         if (rv && si_trydefaults)
2104                 rv = try_init_plug_and_play(intf_num, &new_smi);
2105
2106         if (rv)
2107                 return rv;
2108
2109         /* So we know not to free it unless we have allocated one. */
2110         new_smi->intf = NULL;
2111         new_smi->si_sm = NULL;
2112         new_smi->handlers = NULL;
2113
2114         if (! new_smi->irq_setup) {
2115                 new_smi->irq = irqs[intf_num];
2116                 new_smi->irq_setup = std_irq_setup;
2117                 new_smi->irq_cleanup = std_irq_cleanup;
2118         }
2119
2120         /* Default to KCS if no type is specified. */
2121         if (si_type[intf_num] == NULL) {
2122                 if (si_trydefaults)
2123                         si_type[intf_num] = "kcs";
2124                 else {
2125                         rv = -EINVAL;
2126                         goto out_err;
2127                 }
2128         }
2129
2130         /* Set up the state machine to use. */
2131         if (strcmp(si_type[intf_num], "kcs") == 0) {
2132                 new_smi->handlers = &kcs_smi_handlers;
2133                 new_smi->si_type = SI_KCS;
2134         } else if (strcmp(si_type[intf_num], "smic") == 0) {
2135                 new_smi->handlers = &smic_smi_handlers;
2136                 new_smi->si_type = SI_SMIC;
2137         } else if (strcmp(si_type[intf_num], "bt") == 0) {
2138                 new_smi->handlers = &bt_smi_handlers;
2139                 new_smi->si_type = SI_BT;
2140         } else {
2141                 /* No support for anything else yet. */
2142                 rv = -EIO;
2143                 goto out_err;
2144         }
2145
2146         /* Allocate the state machine's data and initialize it. */
2147         new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL);
2148         if (! new_smi->si_sm) {
2149                 printk(" Could not allocate state machine memory\n");
2150                 rv = -ENOMEM;
2151                 goto out_err;
2152         }
2153         new_smi->io_size = new_smi->handlers->init_data(new_smi->si_sm,
2154                                                         &new_smi->io);
2155
2156         /* Now that we know the I/O size, we can set up the I/O. */
2157         rv = new_smi->io_setup(new_smi);
2158         if (rv) {
2159                 printk(" Could not set up I/O space\n");
2160                 goto out_err;
2161         }
2162
2163         spin_lock_init(&(new_smi->si_lock));
2164         spin_lock_init(&(new_smi->msg_lock));
2165         spin_lock_init(&(new_smi->count_lock));
2166
2167         /* Do low-level detection first. */
2168         if (new_smi->handlers->detect(new_smi->si_sm)) {
2169                 rv = -ENODEV;
2170                 goto out_err;
2171         }
2172
2173         /* Attempt a get device id command.  If it fails, we probably
2174            don't have a SMI here. */
2175         rv = try_get_dev_id(new_smi);
2176         if (rv)
2177                 goto out_err;
2178
2179         setup_oem_data_handler(new_smi);
2180
2181         /* Try to claim any interrupts. */
2182         new_smi->irq_setup(new_smi);
2183
2184         INIT_LIST_HEAD(&(new_smi->xmit_msgs));
2185         INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs));
2186         new_smi->curr_msg = NULL;
2187         atomic_set(&new_smi->req_events, 0);
2188         new_smi->run_to_completion = 0;
2189
2190         new_smi->interrupt_disabled = 0;
2191         new_smi->timer_stopped = 0;
2192         new_smi->stop_operation = 0;
2193
2194         /* Start clearing the flags before we enable interrupts or the
2195            timer to avoid racing with the timer. */
2196         start_clear_flags(new_smi);
2197         /* IRQ is defined to be set when non-zero. */
2198         if (new_smi->irq)
2199                 new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ;
2200
2201         /* The ipmi_register_smi() code does some operations to
2202            determine the channel information, so we must be ready to
2203            handle operations before it is called.  This means we have
2204            to stop the timer if we get an error after this point. */
2205         init_timer(&(new_smi->si_timer));
2206         new_smi->si_timer.data = (long) new_smi;
2207         new_smi->si_timer.function = smi_timeout;
2208         new_smi->last_timeout_jiffies = jiffies;
2209         new_smi->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
2210         add_timer(&(new_smi->si_timer));
2211
2212         rv = ipmi_register_smi(&handlers,
2213                                new_smi,
2214                                ipmi_version_major(&new_smi->device_id),
2215                                ipmi_version_minor(&new_smi->device_id),
2216                                new_smi->slave_addr,
2217                                &(new_smi->intf));
2218         if (rv) {
2219                 printk(KERN_ERR
2220                        "ipmi_si: Unable to register device: error %d\n",
2221                        rv);
2222                 goto out_err_stop_timer;
2223         }
2224
2225         rv = ipmi_smi_add_proc_entry(new_smi->intf, "type",
2226                                      type_file_read_proc, NULL,
2227                                      new_smi, THIS_MODULE);
2228         if (rv) {
2229                 printk(KERN_ERR
2230                        "ipmi_si: Unable to create proc entry: %d\n",
2231                        rv);
2232                 goto out_err_stop_timer;
2233         }
2234
2235         rv = ipmi_smi_add_proc_entry(new_smi->intf, "si_stats",
2236                                      stat_file_read_proc, NULL,
2237                                      new_smi, THIS_MODULE);
2238         if (rv) {
2239                 printk(KERN_ERR
2240                        "ipmi_si: Unable to create proc entry: %d\n",
2241                        rv);
2242                 goto out_err_stop_timer;
2243         }
2244
2245         *smi = new_smi;
2246
2247         printk(" IPMI %s interface initialized\n", si_type[intf_num]);
2248
2249         return 0;
2250
2251  out_err_stop_timer:
2252         new_smi->stop_operation = 1;
2253
2254         /* Wait for the timer to stop.  This avoids problems with race
2255            conditions removing the timer here. */
2256         while (! new_smi->timer_stopped) {
2257                 set_current_state(TASK_UNINTERRUPTIBLE);
2258                 schedule_timeout(1);
2259         }
2260
2261  out_err:
2262         if (new_smi->intf)
2263                 ipmi_unregister_smi(new_smi->intf);
2264
2265         new_smi->irq_cleanup(new_smi);
2266
2267         /* Wait until we know that we are out of any interrupt
2268            handlers might have been running before we freed the
2269            interrupt. */
2270         synchronize_sched();
2271
2272         if (new_smi->si_sm) {
2273                 if (new_smi->handlers)
2274                         new_smi->handlers->cleanup(new_smi->si_sm);
2275                 kfree(new_smi->si_sm);
2276         }
2277         new_smi->io_cleanup(new_smi);
2278
2279         return rv;
2280 }
2281
2282 static __init int init_ipmi_si(void)
2283 {
2284         int  rv = 0;
2285         int  pos = 0;
2286         int  i;
2287         char *str;
2288
2289         if (initialized)
2290                 return 0;
2291         initialized = 1;
2292
2293         /* Parse out the si_type string into its components. */
2294         str = si_type_str;
2295         if (*str != '\0') {
2296                 for (i = 0; (i < SI_MAX_PARMS) && (*str != '\0'); i++) {
2297                         si_type[i] = str;
2298                         str = strchr(str, ',');
2299                         if (str) {
2300                                 *str = '\0';
2301                                 str++;
2302                         } else {
2303                                 break;
2304                         }
2305                 }
2306         }
2307
2308         printk(KERN_INFO "IPMI System Interface driver.\n");
2309
2310 #ifdef CONFIG_X86
2311         dmi_find_bmc();
2312 #endif
2313
2314         rv = init_one_smi(0, &(smi_infos[pos]));
2315         if (rv && ! ports[0] && si_trydefaults) {
2316                 /* If we are trying defaults and the initial port is
2317                    not set, then set it. */
2318                 si_type[0] = "kcs";
2319                 ports[0] = DEFAULT_KCS_IO_PORT;
2320                 rv = init_one_smi(0, &(smi_infos[pos]));
2321                 if (rv) {
2322                         /* No KCS - try SMIC */
2323                         si_type[0] = "smic";
2324                         ports[0] = DEFAULT_SMIC_IO_PORT;
2325                         rv = init_one_smi(0, &(smi_infos[pos]));
2326                 }
2327                 if (rv) {
2328                         /* No SMIC - try BT */
2329                         si_type[0] = "bt";
2330                         ports[0] = DEFAULT_BT_IO_PORT;
2331                         rv = init_one_smi(0, &(smi_infos[pos]));
2332                 }
2333         }
2334         if (rv == 0)
2335                 pos++;
2336
2337         for (i = 1; i < SI_MAX_PARMS; i++) {
2338                 rv = init_one_smi(i, &(smi_infos[pos]));
2339                 if (rv == 0)
2340                         pos++;
2341         }
2342
2343         if (smi_infos[0] == NULL) {
2344                 printk("ipmi_si: Unable to find any System Interface(s)\n");
2345                 return -ENODEV;
2346         }
2347
2348         return 0;
2349 }
2350 module_init(init_ipmi_si);
2351
2352 static void __exit cleanup_one_si(struct smi_info *to_clean)
2353 {
2354         int           rv;
2355         unsigned long flags;
2356
2357         if (! to_clean)
2358                 return;
2359
2360         /* Tell the timer and interrupt handlers that we are shutting
2361            down. */
2362         spin_lock_irqsave(&(to_clean->si_lock), flags);
2363         spin_lock(&(to_clean->msg_lock));
2364
2365         to_clean->stop_operation = 1;
2366
2367         to_clean->irq_cleanup(to_clean);
2368
2369         spin_unlock(&(to_clean->msg_lock));
2370         spin_unlock_irqrestore(&(to_clean->si_lock), flags);
2371
2372         /* Wait until we know that we are out of any interrupt
2373            handlers might have been running before we freed the
2374            interrupt. */
2375         synchronize_sched();
2376
2377         /* Wait for the timer to stop.  This avoids problems with race
2378            conditions removing the timer here. */
2379         while (! to_clean->timer_stopped) {
2380                 set_current_state(TASK_UNINTERRUPTIBLE);
2381                 schedule_timeout(1);
2382         }
2383
2384         /* Interrupts and timeouts are stopped, now make sure the
2385            interface is in a clean state. */
2386         while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
2387                 poll(to_clean);
2388                 set_current_state(TASK_UNINTERRUPTIBLE);
2389                 schedule_timeout(1);
2390         }
2391
2392         rv = ipmi_unregister_smi(to_clean->intf);
2393         if (rv) {
2394                 printk(KERN_ERR
2395                        "ipmi_si: Unable to unregister device: errno=%d\n",
2396                        rv);
2397         }
2398
2399         to_clean->handlers->cleanup(to_clean->si_sm);
2400
2401         kfree(to_clean->si_sm);
2402
2403         to_clean->io_cleanup(to_clean);
2404 }
2405
2406 static __exit void cleanup_ipmi_si(void)
2407 {
2408         int i;
2409
2410         if (! initialized)
2411                 return;
2412
2413         for (i = 0; i < SI_MAX_DRIVERS; i++) {
2414                 cleanup_one_si(smi_infos[i]);
2415         }
2416 }
2417 module_exit(cleanup_ipmi_si);
2418
2419 MODULE_LICENSE("GPL");
2420 MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
2421 MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT system interfaces.");