drivers/char/ftape/lowlevel/ftape-format.c

   1 /*
   2  * Copyright (C) 1997 Claus-Justus Heine.
   3
   4  This program is free software; you can redistribute it and/or modify
   5  it under the terms of the GNU General Public License as published by
   6  the Free Software Foundation; either version 2, or (at your option)
   7  any later version.
   8
   9  This program is distributed in the hope that it will be useful,
  10  but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  GNU General Public License for more details.
  13
  14  You should have received a copy of the GNU General Public License
  15  along with this program; see the file COPYING.  If not, write to
  16  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  17
  18  *
  19  * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-format.c,v $
  20  * $Revision: 1.2.4.1 $
  21  * $Date: 1997/11/14 16:05:39 $
  22  *
  23  *      This file contains the code to support formatting of floppy
  24  *      tape cartridges with the QIC-40/80/3010/3020 floppy-tape
  25  *      driver "ftape" for Linux.
  26  */
  27
  28 #include <linux/string.h>
  29 #include <linux/errno.h>
  30
  31 #include <linux/ftape.h>
  32 #include <linux/qic117.h>
  33 #include "../lowlevel/ftape-tracing.h"
  34 #include "../lowlevel/ftape-io.h"
  35 #include "../lowlevel/ftape-ctl.h"
  36 #include "../lowlevel/ftape-rw.h"
  37 #include "../lowlevel/ftape-ecc.h"
  38 #include "../lowlevel/ftape-bsm.h"
  39 #include "../lowlevel/ftape-format.h"
  40
  41 #if defined(TESTING)
  42 #define FT_FMT_SEGS_PER_BUF 50
  43 #else
  44 #define FT_FMT_SEGS_PER_BUF (FT_BUFF_SIZE/(4*FT_SECTORS_PER_SEGMENT))
  45 #endif
  46
  47 static spinlock_t ftape_format_lock;
  48
  49 /*
  50  *  first segment of the new buffer
  51  */
  52 static int switch_segment;
  53
  54 /*
  55  *  at most 256 segments fit into one 32 kb buffer.  Even TR-1 cartridges have
  56  *  more than this many segments per track, so better be careful.
  57  *
  58  *  buffer_struct *buff: buffer to store the formatting coordinates in
  59  *  int  start: starting segment for this buffer.
  60  *  int    spt: segments per track
  61  *
  62  *  Note: segment ids are relative to the start of the track here.
  63  */
  64 static void setup_format_buffer(buffer_struct *buff, int start, int spt,
  65                                 __u8 gap3)
  66 {
  67         int to_do = spt - start;
  68         TRACE_FUN(ft_t_flow);
  69
  70         if (to_do > FT_FMT_SEGS_PER_BUF) {
  71                 to_do = FT_FMT_SEGS_PER_BUF;
  72         }
  73         buff->ptr          = buff->address;
  74         buff->remaining    = to_do * FT_SECTORS_PER_SEGMENT; /* # sectors */
  75         buff->bytes        = buff->remaining * 4; /* need 4 bytes per sector */
  76         buff->gap3         = gap3;
  77         buff->segment_id   = start;
  78         buff->next_segment = start + to_do;
  79         if (buff->next_segment >= spt) {
  80                 buff->next_segment = 0; /* 0 means: stop runner */
  81         }
  82         buff->status       = waiting; /* tells the isr that it can use
  83                                        * this buffer
  84                                        */
  85         TRACE_EXIT;
  86 }
  87
  88
  89 /*
  90  *  start formatting a new track.
  91  */
  92 int ftape_format_track(const unsigned int track, const __u8 gap3)
  93 {
  94         unsigned long flags;
  95         buffer_struct *tail, *head;
  96         int status;
  97         TRACE_FUN(ft_t_flow);
  98
  99         TRACE_CATCH(ftape_ready_wait(ftape_timeout.pause, &status),);
 100         if (track & 1) {
 101                 if (!(status & QIC_STATUS_AT_EOT)) {
 102                         TRACE_CATCH(ftape_seek_to_eot(),);
 103                 }
 104         } else {
 105                 if (!(status & QIC_STATUS_AT_BOT)) {
 106                         TRACE_CATCH(ftape_seek_to_bot(),);
 107                 }
 108         }
 109         ftape_abort_operation(); /* this sets ft_head = ft_tail = 0 */
 110         ftape_set_state(formatting);
 111
 112         TRACE(ft_t_noise,
 113               "Formatting track %d, logical: from segment %d to %d",
 114               track, track * ft_segments_per_track,
 115               (track + 1) * ft_segments_per_track - 1);
 116
 117         /*
 118          *  initialize the buffer switching protocol for this track
 119          */
 120         head = ftape_get_buffer(ft_queue_head); /* tape isn't running yet */
 121         tail = ftape_get_buffer(ft_queue_tail); /* tape isn't running yet */
 122         switch_segment = 0;
 123         do {
 124                 FT_SIGNAL_EXIT(_DONT_BLOCK);
 125                 setup_format_buffer(tail, switch_segment,
 126                                     ft_segments_per_track, gap3);
 127                 switch_segment = tail->next_segment;
 128         } while ((switch_segment != 0) &&
 129                  ((tail = ftape_next_buffer(ft_queue_tail)) != head));
 130         /* go */
 131         head->status = formatting;
 132         TRACE_CATCH(ftape_seek_head_to_track(track),);
 133         TRACE_CATCH(ftape_command(QIC_LOGICAL_FORWARD),);
 134         spin_lock_irqsave(&ftape_format_lock, flags);
 135         TRACE_CATCH(fdc_setup_formatting(head), restore_flags(flags));
 136         spin_unlock_irqrestore(&ftape_format_lock, flags);
 137         TRACE_EXIT 0;
 138 }
 139
 140 /*   return segment id of segment currently being formatted and do the
 141  *   buffer switching stuff.
 142  */
 143 int ftape_format_status(unsigned int *segment_id)
 144 {
 145         buffer_struct *tail = ftape_get_buffer(ft_queue_tail);
 146         int result;
 147         TRACE_FUN(ft_t_flow);
 148
 149         while (switch_segment != 0 &&
 150                ftape_get_buffer(ft_queue_head) != tail) {
 151                 FT_SIGNAL_EXIT(_DONT_BLOCK);
 152                 /*  need more buffers, first wait for empty buffer
 153                  */
 154                 TRACE_CATCH(ftape_wait_segment(formatting),);
 155                 /*  don't worry for gap3. If we ever hit this piece of code,
 156                  *  then all buffer already have the correct gap3 set!
 157                  */
 158                 setup_format_buffer(tail, switch_segment,
 159                                     ft_segments_per_track, tail->gap3);
 160                 switch_segment = tail->next_segment;
 161                 if (switch_segment != 0) {
 162                         tail = ftape_next_buffer(ft_queue_tail);
 163                 }
 164         }
 165         /*    should runner stop ?
 166          */
 167         if (ft_runner_status == aborting || ft_runner_status == do_abort) {
 168                 buffer_struct *head = ftape_get_buffer(ft_queue_head);
 169                 TRACE(ft_t_warn, "Error formatting segment %d",
 170                       ftape_get_buffer(ft_queue_head)->segment_id);
 171                 (void)ftape_abort_operation();
 172                 TRACE_EXIT (head->status != error) ? -EAGAIN : -EIO;
 173         }
 174         /*
 175          *  don't care if the timer expires, this is just kind of a
 176          *  "select" operation that lets the calling process sleep
 177          *  until something has happened
 178          */
 179         if (fdc_interrupt_wait(5 * FT_SECOND) < 0) {
 180                 TRACE(ft_t_noise, "End of track %d at segment %d",
 181                       ft_location.track,
 182                       ftape_get_buffer(ft_queue_head)->segment_id);
 183                 result = 1;  /* end of track, unlock module */
 184         } else {
 185                 result = 0;
 186         }
 187         /*
 188          *  the calling process should use the seg id to determine
 189          *  which parts of the dma buffers can be safely overwritten
 190          *  with new data.
 191          */
 192         *segment_id = ftape_get_buffer(ft_queue_head)->segment_id;
 193         /*
 194          *  Internally we start counting segment ids from the start of
 195          *  each track when formatting, but externally we keep them
 196          *  relative to the start of the tape:
 197          */
 198         *segment_id += ft_location.track * ft_segments_per_track;
 199         TRACE_EXIT result;
 200 }
 201
 202 /*
 203  *  The segment id is relative to the start of the tape
 204  */
 205 int ftape_verify_segment(const unsigned int segment_id, SectorMap *bsm)
 206 {
 207         int result;
 208         int verify_done = 0;
 209         TRACE_FUN(ft_t_flow);
 210
 211         TRACE(ft_t_noise, "Verifying segment %d", segment_id);
 212
 213         if (ft_driver_state != verifying) {
 214                 TRACE(ft_t_noise, "calling ftape_abort_operation");
 215                 if (ftape_abort_operation() < 0) {
 216                         TRACE(ft_t_err, "ftape_abort_operation failed");
 217                         TRACE_EXIT -EIO;
 218                 }
 219         }
 220         *bsm = 0x00000000;
 221         ftape_set_state(verifying);
 222         for (;;) {
 223                 buffer_struct *tail;
 224                 /*
 225                  *  Allow escape from this loop on signal
 226                  */
 227                 FT_SIGNAL_EXIT(_DONT_BLOCK);
 228                 /*
 229                  *  Search all full buffers for the first matching the
 230                  *  wanted segment.  Clear other buffers on the fly.
 231                  */
 232                 tail = ftape_get_buffer(ft_queue_tail);
 233                 while (!verify_done && tail->status == done) {
 234                         /*
 235                          *  Allow escape from this loop on signal !
 236                          */
 237                         FT_SIGNAL_EXIT(_DONT_BLOCK);
 238                         if (tail->segment_id == segment_id) {
 239                                 /*  If out buffer is already full,
 240                                  *  return its contents.
 241                                  */
 242                                 TRACE(ft_t_flow, "found segment in cache: %d",
 243                                       segment_id);
 244                                 if ((tail->soft_error_map |
 245                                      tail->hard_error_map) != 0) {
 246                                         TRACE(ft_t_info,"bsm[%d] = 0x%08lx",
 247                                               segment_id,
 248                                               (unsigned long)
 249                                               (tail->soft_error_map |
 250                                               tail->hard_error_map));
 251                                         *bsm = (tail->soft_error_map |
 252                                                 tail->hard_error_map);
 253                                 }
 254                                 verify_done = 1;
 255                         } else {
 256                                 TRACE(ft_t_flow,"zapping segment in cache: %d",
 257                                       tail->segment_id);
 258                         }
 259                         tail->status = waiting;
 260                         tail = ftape_next_buffer(ft_queue_tail);
 261                 }
 262                 if (!verify_done && tail->status == verifying) {
 263                         if (tail->segment_id == segment_id) {
 264                                 switch(ftape_wait_segment(verifying)) {
 265                                 case 0:
 266                                         break;
 267                                 case -EINTR:
 268                                         TRACE_ABORT(-EINTR, ft_t_warn,
 269                                                     "interrupted by "
 270                                                     "non-blockable signal");
 271                                         break;
 272                                 default:
 273                                         ftape_abort_operation();
 274                                         ftape_set_state(verifying);
 275                                         /* be picky */
 276                                         TRACE_ABORT(-EIO, ft_t_warn,
 277                                                     "wait_segment failed");
 278                                 }
 279                         } else {
 280                                 /*  We're reading the wrong segment,
 281                                  *  stop runner.
 282                                  */
 283                                 TRACE(ft_t_noise, "verifying wrong segment");
 284                                 ftape_abort_operation();
 285                                 ftape_set_state(verifying);
 286                         }
 287                 }
 288                 /*    should runner stop ?
 289                  */
 290                 if (ft_runner_status == aborting) {
 291                         buffer_struct *head = ftape_get_buffer(ft_queue_head);
 292                         if (head->status == error ||
 293                             head->status == verifying) {
 294                                 /* no data or overrun error */
 295                                 head->status = waiting;
 296                         }
 297                         TRACE_CATCH(ftape_dumb_stop(),);
 298                 } else {
 299                         /*  If just passed last segment on tape: wait
 300                          *  for BOT or EOT mark. Sets ft_runner_status to
 301                          *  idle if at lEOT and successful
 302                          */
 303                         TRACE_CATCH(ftape_handle_logical_eot(),);
 304                 }
 305                 if (verify_done) {
 306                         TRACE_EXIT 0;
 307                 }
 308                 /*    Now at least one buffer is idle!
 309                  *    Restart runner & tape if needed.
 310                  */
 311                 /*  We could optimize the following a little bit. We know that
 312                  *  the bad sector map is empty.
 313                  */
 314                 tail = ftape_get_buffer(ft_queue_tail);
 315                 if (tail->status == waiting) {
 316                         buffer_struct *head = ftape_get_buffer(ft_queue_head);
 317
 318                         ftape_setup_new_segment(head, segment_id, -1);
 319                         ftape_calc_next_cluster(head);
 320                         if (ft_runner_status == idle) {
 321                                 result = ftape_start_tape(segment_id,
 322                                                           head->sector_offset);
 323                                 switch(result) {
 324                                 case 0:
 325                                         break;
 326                                 case -ETIME:
 327                                 case -EINTR:
 328                                         TRACE_ABORT(result, ft_t_err, "Error: "
 329                                                     "segment %d unreachable",
 330                                                     segment_id);
 331                                         break;
 332                                 default:
 333                                         *bsm = EMPTY_SEGMENT;
 334                                         TRACE_EXIT 0;
 335                                         break;
 336                                 }
 337                         }
 338                         head->status = verifying;
 339                         fdc_setup_read_write(head, FDC_VERIFY);
 340                 }
 341         }
 342         /* not reached */
 343         TRACE_EXIT -EIO;
 344 }