Merge branches 'arm/omap', 'arm/exynos', 'arm/smmu', 'arm/mediatek', 'arm/qcom',...
[sfrench/cifs-2.6.git] / drivers / bluetooth / hci_qca.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  Bluetooth Software UART Qualcomm protocol
4  *
5  *  HCI_IBS (HCI In-Band Sleep) is Qualcomm's power management
6  *  protocol extension to H4.
7  *
8  *  Copyright (C) 2007 Texas Instruments, Inc.
9  *  Copyright (c) 2010, 2012, 2018 The Linux Foundation. All rights reserved.
10  *
11  *  Acknowledgements:
12  *  This file is based on hci_ll.c, which was...
13  *  Written by Ohad Ben-Cohen <ohad@bencohen.org>
14  *  which was in turn based on hci_h4.c, which was written
15  *  by Maxim Krasnyansky and Marcel Holtmann.
16  */
17
18 #include <linux/kernel.h>
19 #include <linux/clk.h>
20 #include <linux/completion.h>
21 #include <linux/debugfs.h>
22 #include <linux/delay.h>
23 #include <linux/device.h>
24 #include <linux/gpio/consumer.h>
25 #include <linux/mod_devicetable.h>
26 #include <linux/module.h>
27 #include <linux/of_device.h>
28 #include <linux/platform_device.h>
29 #include <linux/regulator/consumer.h>
30 #include <linux/serdev.h>
31 #include <asm/unaligned.h>
32
33 #include <net/bluetooth/bluetooth.h>
34 #include <net/bluetooth/hci_core.h>
35
36 #include "hci_uart.h"
37 #include "btqca.h"
38
39 /* HCI_IBS protocol messages */
40 #define HCI_IBS_SLEEP_IND       0xFE
41 #define HCI_IBS_WAKE_IND        0xFD
42 #define HCI_IBS_WAKE_ACK        0xFC
43 #define HCI_MAX_IBS_SIZE        10
44
45 #define IBS_WAKE_RETRANS_TIMEOUT_MS     100
46 #define IBS_TX_IDLE_TIMEOUT_MS          2000
47 #define CMD_TRANS_TIMEOUT_MS            100
48
49 /* susclk rate */
50 #define SUSCLK_RATE_32KHZ       32768
51
52 /* Controller debug log header */
53 #define QCA_DEBUG_HANDLE        0x2EDC
54
55 enum qca_flags {
56         QCA_IBS_ENABLED,
57         QCA_DROP_VENDOR_EVENT,
58 };
59
60 /* HCI_IBS transmit side sleep protocol states */
61 enum tx_ibs_states {
62         HCI_IBS_TX_ASLEEP,
63         HCI_IBS_TX_WAKING,
64         HCI_IBS_TX_AWAKE,
65 };
66
67 /* HCI_IBS receive side sleep protocol states */
68 enum rx_states {
69         HCI_IBS_RX_ASLEEP,
70         HCI_IBS_RX_AWAKE,
71 };
72
73 /* HCI_IBS transmit and receive side clock state vote */
74 enum hci_ibs_clock_state_vote {
75         HCI_IBS_VOTE_STATS_UPDATE,
76         HCI_IBS_TX_VOTE_CLOCK_ON,
77         HCI_IBS_TX_VOTE_CLOCK_OFF,
78         HCI_IBS_RX_VOTE_CLOCK_ON,
79         HCI_IBS_RX_VOTE_CLOCK_OFF,
80 };
81
82 struct qca_data {
83         struct hci_uart *hu;
84         struct sk_buff *rx_skb;
85         struct sk_buff_head txq;
86         struct sk_buff_head tx_wait_q;  /* HCI_IBS wait queue   */
87         spinlock_t hci_ibs_lock;        /* HCI_IBS state lock   */
88         u8 tx_ibs_state;        /* HCI_IBS transmit side power state*/
89         u8 rx_ibs_state;        /* HCI_IBS receive side power state */
90         bool tx_vote;           /* Clock must be on for TX */
91         bool rx_vote;           /* Clock must be on for RX */
92         struct timer_list tx_idle_timer;
93         u32 tx_idle_delay;
94         struct timer_list wake_retrans_timer;
95         u32 wake_retrans;
96         struct workqueue_struct *workqueue;
97         struct work_struct ws_awake_rx;
98         struct work_struct ws_awake_device;
99         struct work_struct ws_rx_vote_off;
100         struct work_struct ws_tx_vote_off;
101         unsigned long flags;
102         struct completion drop_ev_comp;
103
104         /* For debugging purpose */
105         u64 ibs_sent_wacks;
106         u64 ibs_sent_slps;
107         u64 ibs_sent_wakes;
108         u64 ibs_recv_wacks;
109         u64 ibs_recv_slps;
110         u64 ibs_recv_wakes;
111         u64 vote_last_jif;
112         u32 vote_on_ms;
113         u32 vote_off_ms;
114         u64 tx_votes_on;
115         u64 rx_votes_on;
116         u64 tx_votes_off;
117         u64 rx_votes_off;
118         u64 votes_on;
119         u64 votes_off;
120 };
121
122 enum qca_speed_type {
123         QCA_INIT_SPEED = 1,
124         QCA_OPER_SPEED
125 };
126
127 /*
128  * Voltage regulator information required for configuring the
129  * QCA Bluetooth chipset
130  */
131 struct qca_vreg {
132         const char *name;
133         unsigned int min_uV;
134         unsigned int max_uV;
135         unsigned int load_uA;
136 };
137
138 struct qca_vreg_data {
139         enum qca_btsoc_type soc_type;
140         struct qca_vreg *vregs;
141         size_t num_vregs;
142 };
143
144 /*
145  * Platform data for the QCA Bluetooth power driver.
146  */
147 struct qca_power {
148         struct device *dev;
149         const struct qca_vreg_data *vreg_data;
150         struct regulator_bulk_data *vreg_bulk;
151         bool vregs_on;
152 };
153
154 struct qca_serdev {
155         struct hci_uart  serdev_hu;
156         struct gpio_desc *bt_en;
157         struct clk       *susclk;
158         enum qca_btsoc_type btsoc_type;
159         struct qca_power *bt_power;
160         u32 init_speed;
161         u32 oper_speed;
162         const char *firmware_name;
163 };
164
165 static int qca_power_setup(struct hci_uart *hu, bool on);
166 static void qca_power_shutdown(struct hci_uart *hu);
167 static int qca_power_off(struct hci_dev *hdev);
168
169 static enum qca_btsoc_type qca_soc_type(struct hci_uart *hu)
170 {
171         enum qca_btsoc_type soc_type;
172
173         if (hu->serdev) {
174                 struct qca_serdev *qsd = serdev_device_get_drvdata(hu->serdev);
175
176                 soc_type = qsd->btsoc_type;
177         } else {
178                 soc_type = QCA_ROME;
179         }
180
181         return soc_type;
182 }
183
184 static const char *qca_get_firmware_name(struct hci_uart *hu)
185 {
186         if (hu->serdev) {
187                 struct qca_serdev *qsd = serdev_device_get_drvdata(hu->serdev);
188
189                 return qsd->firmware_name;
190         } else {
191                 return NULL;
192         }
193 }
194
195 static void __serial_clock_on(struct tty_struct *tty)
196 {
197         /* TODO: Some chipset requires to enable UART clock on client
198          * side to save power consumption or manual work is required.
199          * Please put your code to control UART clock here if needed
200          */
201 }
202
203 static void __serial_clock_off(struct tty_struct *tty)
204 {
205         /* TODO: Some chipset requires to disable UART clock on client
206          * side to save power consumption or manual work is required.
207          * Please put your code to control UART clock off here if needed
208          */
209 }
210
211 /* serial_clock_vote needs to be called with the ibs lock held */
212 static void serial_clock_vote(unsigned long vote, struct hci_uart *hu)
213 {
214         struct qca_data *qca = hu->priv;
215         unsigned int diff;
216
217         bool old_vote = (qca->tx_vote | qca->rx_vote);
218         bool new_vote;
219
220         switch (vote) {
221         case HCI_IBS_VOTE_STATS_UPDATE:
222                 diff = jiffies_to_msecs(jiffies - qca->vote_last_jif);
223
224                 if (old_vote)
225                         qca->vote_off_ms += diff;
226                 else
227                         qca->vote_on_ms += diff;
228                 return;
229
230         case HCI_IBS_TX_VOTE_CLOCK_ON:
231                 qca->tx_vote = true;
232                 qca->tx_votes_on++;
233                 new_vote = true;
234                 break;
235
236         case HCI_IBS_RX_VOTE_CLOCK_ON:
237                 qca->rx_vote = true;
238                 qca->rx_votes_on++;
239                 new_vote = true;
240                 break;
241
242         case HCI_IBS_TX_VOTE_CLOCK_OFF:
243                 qca->tx_vote = false;
244                 qca->tx_votes_off++;
245                 new_vote = qca->rx_vote | qca->tx_vote;
246                 break;
247
248         case HCI_IBS_RX_VOTE_CLOCK_OFF:
249                 qca->rx_vote = false;
250                 qca->rx_votes_off++;
251                 new_vote = qca->rx_vote | qca->tx_vote;
252                 break;
253
254         default:
255                 BT_ERR("Voting irregularity");
256                 return;
257         }
258
259         if (new_vote != old_vote) {
260                 if (new_vote)
261                         __serial_clock_on(hu->tty);
262                 else
263                         __serial_clock_off(hu->tty);
264
265                 BT_DBG("Vote serial clock %s(%s)", new_vote ? "true" : "false",
266                        vote ? "true" : "false");
267
268                 diff = jiffies_to_msecs(jiffies - qca->vote_last_jif);
269
270                 if (new_vote) {
271                         qca->votes_on++;
272                         qca->vote_off_ms += diff;
273                 } else {
274                         qca->votes_off++;
275                         qca->vote_on_ms += diff;
276                 }
277                 qca->vote_last_jif = jiffies;
278         }
279 }
280
281 /* Builds and sends an HCI_IBS command packet.
282  * These are very simple packets with only 1 cmd byte.
283  */
284 static int send_hci_ibs_cmd(u8 cmd, struct hci_uart *hu)
285 {
286         int err = 0;
287         struct sk_buff *skb = NULL;
288         struct qca_data *qca = hu->priv;
289
290         BT_DBG("hu %p send hci ibs cmd 0x%x", hu, cmd);
291
292         skb = bt_skb_alloc(1, GFP_ATOMIC);
293         if (!skb) {
294                 BT_ERR("Failed to allocate memory for HCI_IBS packet");
295                 return -ENOMEM;
296         }
297
298         /* Assign HCI_IBS type */
299         skb_put_u8(skb, cmd);
300
301         skb_queue_tail(&qca->txq, skb);
302
303         return err;
304 }
305
306 static void qca_wq_awake_device(struct work_struct *work)
307 {
308         struct qca_data *qca = container_of(work, struct qca_data,
309                                             ws_awake_device);
310         struct hci_uart *hu = qca->hu;
311         unsigned long retrans_delay;
312
313         BT_DBG("hu %p wq awake device", hu);
314
315         /* Vote for serial clock */
316         serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_ON, hu);
317
318         spin_lock(&qca->hci_ibs_lock);
319
320         /* Send wake indication to device */
321         if (send_hci_ibs_cmd(HCI_IBS_WAKE_IND, hu) < 0)
322                 BT_ERR("Failed to send WAKE to device");
323
324         qca->ibs_sent_wakes++;
325
326         /* Start retransmit timer */
327         retrans_delay = msecs_to_jiffies(qca->wake_retrans);
328         mod_timer(&qca->wake_retrans_timer, jiffies + retrans_delay);
329
330         spin_unlock(&qca->hci_ibs_lock);
331
332         /* Actually send the packets */
333         hci_uart_tx_wakeup(hu);
334 }
335
336 static void qca_wq_awake_rx(struct work_struct *work)
337 {
338         struct qca_data *qca = container_of(work, struct qca_data,
339                                             ws_awake_rx);
340         struct hci_uart *hu = qca->hu;
341
342         BT_DBG("hu %p wq awake rx", hu);
343
344         serial_clock_vote(HCI_IBS_RX_VOTE_CLOCK_ON, hu);
345
346         spin_lock(&qca->hci_ibs_lock);
347         qca->rx_ibs_state = HCI_IBS_RX_AWAKE;
348
349         /* Always acknowledge device wake up,
350          * sending IBS message doesn't count as TX ON.
351          */
352         if (send_hci_ibs_cmd(HCI_IBS_WAKE_ACK, hu) < 0)
353                 BT_ERR("Failed to acknowledge device wake up");
354
355         qca->ibs_sent_wacks++;
356
357         spin_unlock(&qca->hci_ibs_lock);
358
359         /* Actually send the packets */
360         hci_uart_tx_wakeup(hu);
361 }
362
363 static void qca_wq_serial_rx_clock_vote_off(struct work_struct *work)
364 {
365         struct qca_data *qca = container_of(work, struct qca_data,
366                                             ws_rx_vote_off);
367         struct hci_uart *hu = qca->hu;
368
369         BT_DBG("hu %p rx clock vote off", hu);
370
371         serial_clock_vote(HCI_IBS_RX_VOTE_CLOCK_OFF, hu);
372 }
373
374 static void qca_wq_serial_tx_clock_vote_off(struct work_struct *work)
375 {
376         struct qca_data *qca = container_of(work, struct qca_data,
377                                             ws_tx_vote_off);
378         struct hci_uart *hu = qca->hu;
379
380         BT_DBG("hu %p tx clock vote off", hu);
381
382         /* Run HCI tx handling unlocked */
383         hci_uart_tx_wakeup(hu);
384
385         /* Now that message queued to tty driver, vote for tty clocks off.
386          * It is up to the tty driver to pend the clocks off until tx done.
387          */
388         serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_OFF, hu);
389 }
390
391 static void hci_ibs_tx_idle_timeout(struct timer_list *t)
392 {
393         struct qca_data *qca = from_timer(qca, t, tx_idle_timer);
394         struct hci_uart *hu = qca->hu;
395         unsigned long flags;
396
397         BT_DBG("hu %p idle timeout in %d state", hu, qca->tx_ibs_state);
398
399         spin_lock_irqsave_nested(&qca->hci_ibs_lock,
400                                  flags, SINGLE_DEPTH_NESTING);
401
402         switch (qca->tx_ibs_state) {
403         case HCI_IBS_TX_AWAKE:
404                 /* TX_IDLE, go to SLEEP */
405                 if (send_hci_ibs_cmd(HCI_IBS_SLEEP_IND, hu) < 0) {
406                         BT_ERR("Failed to send SLEEP to device");
407                         break;
408                 }
409                 qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
410                 qca->ibs_sent_slps++;
411                 queue_work(qca->workqueue, &qca->ws_tx_vote_off);
412                 break;
413
414         case HCI_IBS_TX_ASLEEP:
415         case HCI_IBS_TX_WAKING:
416                 /* Fall through */
417
418         default:
419                 BT_ERR("Spurious timeout tx state %d", qca->tx_ibs_state);
420                 break;
421         }
422
423         spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
424 }
425
426 static void hci_ibs_wake_retrans_timeout(struct timer_list *t)
427 {
428         struct qca_data *qca = from_timer(qca, t, wake_retrans_timer);
429         struct hci_uart *hu = qca->hu;
430         unsigned long flags, retrans_delay;
431         bool retransmit = false;
432
433         BT_DBG("hu %p wake retransmit timeout in %d state",
434                 hu, qca->tx_ibs_state);
435
436         spin_lock_irqsave_nested(&qca->hci_ibs_lock,
437                                  flags, SINGLE_DEPTH_NESTING);
438
439         switch (qca->tx_ibs_state) {
440         case HCI_IBS_TX_WAKING:
441                 /* No WAKE_ACK, retransmit WAKE */
442                 retransmit = true;
443                 if (send_hci_ibs_cmd(HCI_IBS_WAKE_IND, hu) < 0) {
444                         BT_ERR("Failed to acknowledge device wake up");
445                         break;
446                 }
447                 qca->ibs_sent_wakes++;
448                 retrans_delay = msecs_to_jiffies(qca->wake_retrans);
449                 mod_timer(&qca->wake_retrans_timer, jiffies + retrans_delay);
450                 break;
451
452         case HCI_IBS_TX_ASLEEP:
453         case HCI_IBS_TX_AWAKE:
454                 /* Fall through */
455
456         default:
457                 BT_ERR("Spurious timeout tx state %d", qca->tx_ibs_state);
458                 break;
459         }
460
461         spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
462
463         if (retransmit)
464                 hci_uart_tx_wakeup(hu);
465 }
466
467 /* Initialize protocol */
468 static int qca_open(struct hci_uart *hu)
469 {
470         struct qca_serdev *qcadev;
471         struct qca_data *qca;
472         int ret;
473
474         BT_DBG("hu %p qca_open", hu);
475
476         if (!hci_uart_has_flow_control(hu))
477                 return -EOPNOTSUPP;
478
479         qca = kzalloc(sizeof(struct qca_data), GFP_KERNEL);
480         if (!qca)
481                 return -ENOMEM;
482
483         skb_queue_head_init(&qca->txq);
484         skb_queue_head_init(&qca->tx_wait_q);
485         spin_lock_init(&qca->hci_ibs_lock);
486         qca->workqueue = alloc_ordered_workqueue("qca_wq", 0);
487         if (!qca->workqueue) {
488                 BT_ERR("QCA Workqueue not initialized properly");
489                 kfree(qca);
490                 return -ENOMEM;
491         }
492
493         INIT_WORK(&qca->ws_awake_rx, qca_wq_awake_rx);
494         INIT_WORK(&qca->ws_awake_device, qca_wq_awake_device);
495         INIT_WORK(&qca->ws_rx_vote_off, qca_wq_serial_rx_clock_vote_off);
496         INIT_WORK(&qca->ws_tx_vote_off, qca_wq_serial_tx_clock_vote_off);
497
498         qca->hu = hu;
499         init_completion(&qca->drop_ev_comp);
500
501         /* Assume we start with both sides asleep -- extra wakes OK */
502         qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
503         qca->rx_ibs_state = HCI_IBS_RX_ASLEEP;
504
505         /* clocks actually on, but we start votes off */
506         qca->tx_vote = false;
507         qca->rx_vote = false;
508         qca->flags = 0;
509
510         qca->ibs_sent_wacks = 0;
511         qca->ibs_sent_slps = 0;
512         qca->ibs_sent_wakes = 0;
513         qca->ibs_recv_wacks = 0;
514         qca->ibs_recv_slps = 0;
515         qca->ibs_recv_wakes = 0;
516         qca->vote_last_jif = jiffies;
517         qca->vote_on_ms = 0;
518         qca->vote_off_ms = 0;
519         qca->votes_on = 0;
520         qca->votes_off = 0;
521         qca->tx_votes_on = 0;
522         qca->tx_votes_off = 0;
523         qca->rx_votes_on = 0;
524         qca->rx_votes_off = 0;
525
526         hu->priv = qca;
527
528         if (hu->serdev) {
529
530                 qcadev = serdev_device_get_drvdata(hu->serdev);
531                 if (!qca_is_wcn399x(qcadev->btsoc_type)) {
532                         gpiod_set_value_cansleep(qcadev->bt_en, 1);
533                         /* Controller needs time to bootup. */
534                         msleep(150);
535                 } else {
536                         hu->init_speed = qcadev->init_speed;
537                         hu->oper_speed = qcadev->oper_speed;
538                         ret = qca_power_setup(hu, true);
539                         if (ret) {
540                                 destroy_workqueue(qca->workqueue);
541                                 kfree_skb(qca->rx_skb);
542                                 hu->priv = NULL;
543                                 kfree(qca);
544                                 return ret;
545                         }
546                 }
547         }
548
549         timer_setup(&qca->wake_retrans_timer, hci_ibs_wake_retrans_timeout, 0);
550         qca->wake_retrans = IBS_WAKE_RETRANS_TIMEOUT_MS;
551
552         timer_setup(&qca->tx_idle_timer, hci_ibs_tx_idle_timeout, 0);
553         qca->tx_idle_delay = IBS_TX_IDLE_TIMEOUT_MS;
554
555         BT_DBG("HCI_UART_QCA open, tx_idle_delay=%u, wake_retrans=%u",
556                qca->tx_idle_delay, qca->wake_retrans);
557
558         return 0;
559 }
560
561 static void qca_debugfs_init(struct hci_dev *hdev)
562 {
563         struct hci_uart *hu = hci_get_drvdata(hdev);
564         struct qca_data *qca = hu->priv;
565         struct dentry *ibs_dir;
566         umode_t mode;
567
568         if (!hdev->debugfs)
569                 return;
570
571         ibs_dir = debugfs_create_dir("ibs", hdev->debugfs);
572
573         /* read only */
574         mode = S_IRUGO;
575         debugfs_create_u8("tx_ibs_state", mode, ibs_dir, &qca->tx_ibs_state);
576         debugfs_create_u8("rx_ibs_state", mode, ibs_dir, &qca->rx_ibs_state);
577         debugfs_create_u64("ibs_sent_sleeps", mode, ibs_dir,
578                            &qca->ibs_sent_slps);
579         debugfs_create_u64("ibs_sent_wakes", mode, ibs_dir,
580                            &qca->ibs_sent_wakes);
581         debugfs_create_u64("ibs_sent_wake_acks", mode, ibs_dir,
582                            &qca->ibs_sent_wacks);
583         debugfs_create_u64("ibs_recv_sleeps", mode, ibs_dir,
584                            &qca->ibs_recv_slps);
585         debugfs_create_u64("ibs_recv_wakes", mode, ibs_dir,
586                            &qca->ibs_recv_wakes);
587         debugfs_create_u64("ibs_recv_wake_acks", mode, ibs_dir,
588                            &qca->ibs_recv_wacks);
589         debugfs_create_bool("tx_vote", mode, ibs_dir, &qca->tx_vote);
590         debugfs_create_u64("tx_votes_on", mode, ibs_dir, &qca->tx_votes_on);
591         debugfs_create_u64("tx_votes_off", mode, ibs_dir, &qca->tx_votes_off);
592         debugfs_create_bool("rx_vote", mode, ibs_dir, &qca->rx_vote);
593         debugfs_create_u64("rx_votes_on", mode, ibs_dir, &qca->rx_votes_on);
594         debugfs_create_u64("rx_votes_off", mode, ibs_dir, &qca->rx_votes_off);
595         debugfs_create_u64("votes_on", mode, ibs_dir, &qca->votes_on);
596         debugfs_create_u64("votes_off", mode, ibs_dir, &qca->votes_off);
597         debugfs_create_u32("vote_on_ms", mode, ibs_dir, &qca->vote_on_ms);
598         debugfs_create_u32("vote_off_ms", mode, ibs_dir, &qca->vote_off_ms);
599
600         /* read/write */
601         mode = S_IRUGO | S_IWUSR;
602         debugfs_create_u32("wake_retrans", mode, ibs_dir, &qca->wake_retrans);
603         debugfs_create_u32("tx_idle_delay", mode, ibs_dir,
604                            &qca->tx_idle_delay);
605 }
606
607 /* Flush protocol data */
608 static int qca_flush(struct hci_uart *hu)
609 {
610         struct qca_data *qca = hu->priv;
611
612         BT_DBG("hu %p qca flush", hu);
613
614         skb_queue_purge(&qca->tx_wait_q);
615         skb_queue_purge(&qca->txq);
616
617         return 0;
618 }
619
620 /* Close protocol */
621 static int qca_close(struct hci_uart *hu)
622 {
623         struct qca_serdev *qcadev;
624         struct qca_data *qca = hu->priv;
625
626         BT_DBG("hu %p qca close", hu);
627
628         serial_clock_vote(HCI_IBS_VOTE_STATS_UPDATE, hu);
629
630         skb_queue_purge(&qca->tx_wait_q);
631         skb_queue_purge(&qca->txq);
632         del_timer(&qca->tx_idle_timer);
633         del_timer(&qca->wake_retrans_timer);
634         destroy_workqueue(qca->workqueue);
635         qca->hu = NULL;
636
637         if (hu->serdev) {
638                 qcadev = serdev_device_get_drvdata(hu->serdev);
639                 if (qca_is_wcn399x(qcadev->btsoc_type))
640                         qca_power_shutdown(hu);
641                 else
642                         gpiod_set_value_cansleep(qcadev->bt_en, 0);
643
644         }
645
646         kfree_skb(qca->rx_skb);
647
648         hu->priv = NULL;
649
650         kfree(qca);
651
652         return 0;
653 }
654
655 /* Called upon a wake-up-indication from the device.
656  */
657 static void device_want_to_wakeup(struct hci_uart *hu)
658 {
659         unsigned long flags;
660         struct qca_data *qca = hu->priv;
661
662         BT_DBG("hu %p want to wake up", hu);
663
664         spin_lock_irqsave(&qca->hci_ibs_lock, flags);
665
666         qca->ibs_recv_wakes++;
667
668         switch (qca->rx_ibs_state) {
669         case HCI_IBS_RX_ASLEEP:
670                 /* Make sure clock is on - we may have turned clock off since
671                  * receiving the wake up indicator awake rx clock.
672                  */
673                 queue_work(qca->workqueue, &qca->ws_awake_rx);
674                 spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
675                 return;
676
677         case HCI_IBS_RX_AWAKE:
678                 /* Always acknowledge device wake up,
679                  * sending IBS message doesn't count as TX ON.
680                  */
681                 if (send_hci_ibs_cmd(HCI_IBS_WAKE_ACK, hu) < 0) {
682                         BT_ERR("Failed to acknowledge device wake up");
683                         break;
684                 }
685                 qca->ibs_sent_wacks++;
686                 break;
687
688         default:
689                 /* Any other state is illegal */
690                 BT_ERR("Received HCI_IBS_WAKE_IND in rx state %d",
691                        qca->rx_ibs_state);
692                 break;
693         }
694
695         spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
696
697         /* Actually send the packets */
698         hci_uart_tx_wakeup(hu);
699 }
700
701 /* Called upon a sleep-indication from the device.
702  */
703 static void device_want_to_sleep(struct hci_uart *hu)
704 {
705         unsigned long flags;
706         struct qca_data *qca = hu->priv;
707
708         BT_DBG("hu %p want to sleep in %d state", hu, qca->rx_ibs_state);
709
710         spin_lock_irqsave(&qca->hci_ibs_lock, flags);
711
712         qca->ibs_recv_slps++;
713
714         switch (qca->rx_ibs_state) {
715         case HCI_IBS_RX_AWAKE:
716                 /* Update state */
717                 qca->rx_ibs_state = HCI_IBS_RX_ASLEEP;
718                 /* Vote off rx clock under workqueue */
719                 queue_work(qca->workqueue, &qca->ws_rx_vote_off);
720                 break;
721
722         case HCI_IBS_RX_ASLEEP:
723                 break;
724
725         default:
726                 /* Any other state is illegal */
727                 BT_ERR("Received HCI_IBS_SLEEP_IND in rx state %d",
728                        qca->rx_ibs_state);
729                 break;
730         }
731
732         spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
733 }
734
735 /* Called upon wake-up-acknowledgement from the device
736  */
737 static void device_woke_up(struct hci_uart *hu)
738 {
739         unsigned long flags, idle_delay;
740         struct qca_data *qca = hu->priv;
741         struct sk_buff *skb = NULL;
742
743         BT_DBG("hu %p woke up", hu);
744
745         spin_lock_irqsave(&qca->hci_ibs_lock, flags);
746
747         qca->ibs_recv_wacks++;
748
749         switch (qca->tx_ibs_state) {
750         case HCI_IBS_TX_AWAKE:
751                 /* Expect one if we send 2 WAKEs */
752                 BT_DBG("Received HCI_IBS_WAKE_ACK in tx state %d",
753                        qca->tx_ibs_state);
754                 break;
755
756         case HCI_IBS_TX_WAKING:
757                 /* Send pending packets */
758                 while ((skb = skb_dequeue(&qca->tx_wait_q)))
759                         skb_queue_tail(&qca->txq, skb);
760
761                 /* Switch timers and change state to HCI_IBS_TX_AWAKE */
762                 del_timer(&qca->wake_retrans_timer);
763                 idle_delay = msecs_to_jiffies(qca->tx_idle_delay);
764                 mod_timer(&qca->tx_idle_timer, jiffies + idle_delay);
765                 qca->tx_ibs_state = HCI_IBS_TX_AWAKE;
766                 break;
767
768         case HCI_IBS_TX_ASLEEP:
769                 /* Fall through */
770
771         default:
772                 BT_ERR("Received HCI_IBS_WAKE_ACK in tx state %d",
773                        qca->tx_ibs_state);
774                 break;
775         }
776
777         spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
778
779         /* Actually send the packets */
780         hci_uart_tx_wakeup(hu);
781 }
782
783 /* Enqueue frame for transmittion (padding, crc, etc) may be called from
784  * two simultaneous tasklets.
785  */
786 static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb)
787 {
788         unsigned long flags = 0, idle_delay;
789         struct qca_data *qca = hu->priv;
790
791         BT_DBG("hu %p qca enq skb %p tx_ibs_state %d", hu, skb,
792                qca->tx_ibs_state);
793
794         /* Prepend skb with frame type */
795         memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
796
797         spin_lock_irqsave(&qca->hci_ibs_lock, flags);
798
799         /* Don't go to sleep in middle of patch download or
800          * Out-Of-Band(GPIOs control) sleep is selected.
801          */
802         if (!test_bit(QCA_IBS_ENABLED, &qca->flags)) {
803                 skb_queue_tail(&qca->txq, skb);
804                 spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
805                 return 0;
806         }
807
808         /* Act according to current state */
809         switch (qca->tx_ibs_state) {
810         case HCI_IBS_TX_AWAKE:
811                 BT_DBG("Device awake, sending normally");
812                 skb_queue_tail(&qca->txq, skb);
813                 idle_delay = msecs_to_jiffies(qca->tx_idle_delay);
814                 mod_timer(&qca->tx_idle_timer, jiffies + idle_delay);
815                 break;
816
817         case HCI_IBS_TX_ASLEEP:
818                 BT_DBG("Device asleep, waking up and queueing packet");
819                 /* Save packet for later */
820                 skb_queue_tail(&qca->tx_wait_q, skb);
821
822                 qca->tx_ibs_state = HCI_IBS_TX_WAKING;
823                 /* Schedule a work queue to wake up device */
824                 queue_work(qca->workqueue, &qca->ws_awake_device);
825                 break;
826
827         case HCI_IBS_TX_WAKING:
828                 BT_DBG("Device waking up, queueing packet");
829                 /* Transient state; just keep packet for later */
830                 skb_queue_tail(&qca->tx_wait_q, skb);
831                 break;
832
833         default:
834                 BT_ERR("Illegal tx state: %d (losing packet)",
835                        qca->tx_ibs_state);
836                 kfree_skb(skb);
837                 break;
838         }
839
840         spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
841
842         return 0;
843 }
844
845 static int qca_ibs_sleep_ind(struct hci_dev *hdev, struct sk_buff *skb)
846 {
847         struct hci_uart *hu = hci_get_drvdata(hdev);
848
849         BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_SLEEP_IND);
850
851         device_want_to_sleep(hu);
852
853         kfree_skb(skb);
854         return 0;
855 }
856
857 static int qca_ibs_wake_ind(struct hci_dev *hdev, struct sk_buff *skb)
858 {
859         struct hci_uart *hu = hci_get_drvdata(hdev);
860
861         BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_WAKE_IND);
862
863         device_want_to_wakeup(hu);
864
865         kfree_skb(skb);
866         return 0;
867 }
868
869 static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
870 {
871         struct hci_uart *hu = hci_get_drvdata(hdev);
872
873         BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_WAKE_ACK);
874
875         device_woke_up(hu);
876
877         kfree_skb(skb);
878         return 0;
879 }
880
881 static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff *skb)
882 {
883         /* We receive debug logs from chip as an ACL packets.
884          * Instead of sending the data to ACL to decode the
885          * received data, we are pushing them to the above layers
886          * as a diagnostic packet.
887          */
888         if (get_unaligned_le16(skb->data) == QCA_DEBUG_HANDLE)
889                 return hci_recv_diag(hdev, skb);
890
891         return hci_recv_frame(hdev, skb);
892 }
893
894 static int qca_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
895 {
896         struct hci_uart *hu = hci_get_drvdata(hdev);
897         struct qca_data *qca = hu->priv;
898
899         if (test_bit(QCA_DROP_VENDOR_EVENT, &qca->flags)) {
900                 struct hci_event_hdr *hdr = (void *)skb->data;
901
902                 /* For the WCN3990 the vendor command for a baudrate change
903                  * isn't sent as synchronous HCI command, because the
904                  * controller sends the corresponding vendor event with the
905                  * new baudrate. The event is received and properly decoded
906                  * after changing the baudrate of the host port. It needs to
907                  * be dropped, otherwise it can be misinterpreted as
908                  * response to a later firmware download command (also a
909                  * vendor command).
910                  */
911
912                 if (hdr->evt == HCI_EV_VENDOR)
913                         complete(&qca->drop_ev_comp);
914
915                 kfree_skb(skb);
916
917                 return 0;
918         }
919
920         return hci_recv_frame(hdev, skb);
921 }
922
923 #define QCA_IBS_SLEEP_IND_EVENT \
924         .type = HCI_IBS_SLEEP_IND, \
925         .hlen = 0, \
926         .loff = 0, \
927         .lsize = 0, \
928         .maxlen = HCI_MAX_IBS_SIZE
929
930 #define QCA_IBS_WAKE_IND_EVENT \
931         .type = HCI_IBS_WAKE_IND, \
932         .hlen = 0, \
933         .loff = 0, \
934         .lsize = 0, \
935         .maxlen = HCI_MAX_IBS_SIZE
936
937 #define QCA_IBS_WAKE_ACK_EVENT \
938         .type = HCI_IBS_WAKE_ACK, \
939         .hlen = 0, \
940         .loff = 0, \
941         .lsize = 0, \
942         .maxlen = HCI_MAX_IBS_SIZE
943
944 static const struct h4_recv_pkt qca_recv_pkts[] = {
945         { H4_RECV_ACL,             .recv = qca_recv_acl_data },
946         { H4_RECV_SCO,             .recv = hci_recv_frame    },
947         { H4_RECV_EVENT,           .recv = qca_recv_event    },
948         { QCA_IBS_WAKE_IND_EVENT,  .recv = qca_ibs_wake_ind  },
949         { QCA_IBS_WAKE_ACK_EVENT,  .recv = qca_ibs_wake_ack  },
950         { QCA_IBS_SLEEP_IND_EVENT, .recv = qca_ibs_sleep_ind },
951 };
952
953 static int qca_recv(struct hci_uart *hu, const void *data, int count)
954 {
955         struct qca_data *qca = hu->priv;
956
957         if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
958                 return -EUNATCH;
959
960         qca->rx_skb = h4_recv_buf(hu->hdev, qca->rx_skb, data, count,
961                                   qca_recv_pkts, ARRAY_SIZE(qca_recv_pkts));
962         if (IS_ERR(qca->rx_skb)) {
963                 int err = PTR_ERR(qca->rx_skb);
964                 bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
965                 qca->rx_skb = NULL;
966                 return err;
967         }
968
969         return count;
970 }
971
972 static struct sk_buff *qca_dequeue(struct hci_uart *hu)
973 {
974         struct qca_data *qca = hu->priv;
975
976         return skb_dequeue(&qca->txq);
977 }
978
979 static uint8_t qca_get_baudrate_value(int speed)
980 {
981         switch (speed) {
982         case 9600:
983                 return QCA_BAUDRATE_9600;
984         case 19200:
985                 return QCA_BAUDRATE_19200;
986         case 38400:
987                 return QCA_BAUDRATE_38400;
988         case 57600:
989                 return QCA_BAUDRATE_57600;
990         case 115200:
991                 return QCA_BAUDRATE_115200;
992         case 230400:
993                 return QCA_BAUDRATE_230400;
994         case 460800:
995                 return QCA_BAUDRATE_460800;
996         case 500000:
997                 return QCA_BAUDRATE_500000;
998         case 921600:
999                 return QCA_BAUDRATE_921600;
1000         case 1000000:
1001                 return QCA_BAUDRATE_1000000;
1002         case 2000000:
1003                 return QCA_BAUDRATE_2000000;
1004         case 3000000:
1005                 return QCA_BAUDRATE_3000000;
1006         case 3200000:
1007                 return QCA_BAUDRATE_3200000;
1008         case 3500000:
1009                 return QCA_BAUDRATE_3500000;
1010         default:
1011                 return QCA_BAUDRATE_115200;
1012         }
1013 }
1014
1015 static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
1016 {
1017         struct hci_uart *hu = hci_get_drvdata(hdev);
1018         struct qca_data *qca = hu->priv;
1019         struct sk_buff *skb;
1020         u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 };
1021
1022         if (baudrate > QCA_BAUDRATE_3200000)
1023                 return -EINVAL;
1024
1025         cmd[4] = baudrate;
1026
1027         skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
1028         if (!skb) {
1029                 bt_dev_err(hdev, "Failed to allocate baudrate packet");
1030                 return -ENOMEM;
1031         }
1032
1033         /* Assign commands to change baudrate and packet type. */
1034         skb_put_data(skb, cmd, sizeof(cmd));
1035         hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
1036
1037         skb_queue_tail(&qca->txq, skb);
1038         hci_uart_tx_wakeup(hu);
1039
1040         /* Wait for the baudrate change request to be sent */
1041
1042         while (!skb_queue_empty(&qca->txq))
1043                 usleep_range(100, 200);
1044
1045         if (hu->serdev)
1046                 serdev_device_wait_until_sent(hu->serdev,
1047                       msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
1048
1049         /* Give the controller time to process the request */
1050         if (qca_is_wcn399x(qca_soc_type(hu)))
1051                 msleep(10);
1052         else
1053                 msleep(300);
1054
1055         return 0;
1056 }
1057
1058 static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
1059 {
1060         if (hu->serdev)
1061                 serdev_device_set_baudrate(hu->serdev, speed);
1062         else
1063                 hci_uart_set_baudrate(hu, speed);
1064 }
1065
1066 static int qca_send_power_pulse(struct hci_uart *hu, bool on)
1067 {
1068         int ret;
1069         int timeout = msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS);
1070         u8 cmd = on ? QCA_WCN3990_POWERON_PULSE : QCA_WCN3990_POWEROFF_PULSE;
1071
1072         /* These power pulses are single byte command which are sent
1073          * at required baudrate to wcn3990. On wcn3990, we have an external
1074          * circuit at Tx pin which decodes the pulse sent at specific baudrate.
1075          * For example, wcn3990 supports RF COEX antenna for both Wi-Fi/BT
1076          * and also we use the same power inputs to turn on and off for
1077          * Wi-Fi/BT. Powering up the power sources will not enable BT, until
1078          * we send a power on pulse at 115200 bps. This algorithm will help to
1079          * save power. Disabling hardware flow control is mandatory while
1080          * sending power pulses to SoC.
1081          */
1082         bt_dev_dbg(hu->hdev, "sending power pulse %02x to controller", cmd);
1083
1084         serdev_device_write_flush(hu->serdev);
1085         hci_uart_set_flow_control(hu, true);
1086         ret = serdev_device_write_buf(hu->serdev, &cmd, sizeof(cmd));
1087         if (ret < 0) {
1088                 bt_dev_err(hu->hdev, "failed to send power pulse %02x", cmd);
1089                 return ret;
1090         }
1091
1092         serdev_device_wait_until_sent(hu->serdev, timeout);
1093         hci_uart_set_flow_control(hu, false);
1094
1095         /* Give to controller time to boot/shutdown */
1096         if (on)
1097                 msleep(100);
1098         else
1099                 msleep(10);
1100
1101         return 0;
1102 }
1103
1104 static unsigned int qca_get_speed(struct hci_uart *hu,
1105                                   enum qca_speed_type speed_type)
1106 {
1107         unsigned int speed = 0;
1108
1109         if (speed_type == QCA_INIT_SPEED) {
1110                 if (hu->init_speed)
1111                         speed = hu->init_speed;
1112                 else if (hu->proto->init_speed)
1113                         speed = hu->proto->init_speed;
1114         } else {
1115                 if (hu->oper_speed)
1116                         speed = hu->oper_speed;
1117                 else if (hu->proto->oper_speed)
1118                         speed = hu->proto->oper_speed;
1119         }
1120
1121         return speed;
1122 }
1123
1124 static int qca_check_speeds(struct hci_uart *hu)
1125 {
1126         if (qca_is_wcn399x(qca_soc_type(hu))) {
1127                 if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
1128                     !qca_get_speed(hu, QCA_OPER_SPEED))
1129                         return -EINVAL;
1130         } else {
1131                 if (!qca_get_speed(hu, QCA_INIT_SPEED) ||
1132                     !qca_get_speed(hu, QCA_OPER_SPEED))
1133                         return -EINVAL;
1134         }
1135
1136         return 0;
1137 }
1138
1139 static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
1140 {
1141         unsigned int speed, qca_baudrate;
1142         struct qca_data *qca = hu->priv;
1143         int ret = 0;
1144
1145         if (speed_type == QCA_INIT_SPEED) {
1146                 speed = qca_get_speed(hu, QCA_INIT_SPEED);
1147                 if (speed)
1148                         host_set_baudrate(hu, speed);
1149         } else {
1150                 enum qca_btsoc_type soc_type = qca_soc_type(hu);
1151
1152                 speed = qca_get_speed(hu, QCA_OPER_SPEED);
1153                 if (!speed)
1154                         return 0;
1155
1156                 /* Disable flow control for wcn3990 to deassert RTS while
1157                  * changing the baudrate of chip and host.
1158                  */
1159                 if (qca_is_wcn399x(soc_type))
1160                         hci_uart_set_flow_control(hu, true);
1161
1162                 if (soc_type == QCA_WCN3990) {
1163                         reinit_completion(&qca->drop_ev_comp);
1164                         set_bit(QCA_DROP_VENDOR_EVENT, &qca->flags);
1165                 }
1166
1167                 qca_baudrate = qca_get_baudrate_value(speed);
1168                 bt_dev_dbg(hu->hdev, "Set UART speed to %d", speed);
1169                 ret = qca_set_baudrate(hu->hdev, qca_baudrate);
1170                 if (ret)
1171                         goto error;
1172
1173                 host_set_baudrate(hu, speed);
1174
1175 error:
1176                 if (qca_is_wcn399x(soc_type))
1177                         hci_uart_set_flow_control(hu, false);
1178
1179                 if (soc_type == QCA_WCN3990) {
1180                         /* Wait for the controller to send the vendor event
1181                          * for the baudrate change command.
1182                          */
1183                         if (!wait_for_completion_timeout(&qca->drop_ev_comp,
1184                                                  msecs_to_jiffies(100))) {
1185                                 bt_dev_err(hu->hdev,
1186                                            "Failed to change controller baudrate\n");
1187                                 ret = -ETIMEDOUT;
1188                         }
1189
1190                         clear_bit(QCA_DROP_VENDOR_EVENT, &qca->flags);
1191                 }
1192         }
1193
1194         return ret;
1195 }
1196
1197 static int qca_wcn3990_init(struct hci_uart *hu)
1198 {
1199         struct qca_serdev *qcadev;
1200         int ret;
1201
1202         /* Check for vregs status, may be hci down has turned
1203          * off the voltage regulator.
1204          */
1205         qcadev = serdev_device_get_drvdata(hu->serdev);
1206         if (!qcadev->bt_power->vregs_on) {
1207                 serdev_device_close(hu->serdev);
1208                 ret = qca_power_setup(hu, true);
1209                 if (ret)
1210                         return ret;
1211
1212                 ret = serdev_device_open(hu->serdev);
1213                 if (ret) {
1214                         bt_dev_err(hu->hdev, "failed to open port");
1215                         return ret;
1216                 }
1217         }
1218
1219         /* Forcefully enable wcn3990 to enter in to boot mode. */
1220         host_set_baudrate(hu, 2400);
1221         ret = qca_send_power_pulse(hu, false);
1222         if (ret)
1223                 return ret;
1224
1225         qca_set_speed(hu, QCA_INIT_SPEED);
1226         ret = qca_send_power_pulse(hu, true);
1227         if (ret)
1228                 return ret;
1229
1230         /* Now the device is in ready state to communicate with host.
1231          * To sync host with device we need to reopen port.
1232          * Without this, we will have RTS and CTS synchronization
1233          * issues.
1234          */
1235         serdev_device_close(hu->serdev);
1236         ret = serdev_device_open(hu->serdev);
1237         if (ret) {
1238                 bt_dev_err(hu->hdev, "failed to open port");
1239                 return ret;
1240         }
1241
1242         hci_uart_set_flow_control(hu, false);
1243
1244         return 0;
1245 }
1246
1247 static int qca_setup(struct hci_uart *hu)
1248 {
1249         struct hci_dev *hdev = hu->hdev;
1250         struct qca_data *qca = hu->priv;
1251         unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
1252         enum qca_btsoc_type soc_type = qca_soc_type(hu);
1253         const char *firmware_name = qca_get_firmware_name(hu);
1254         int ret;
1255         int soc_ver = 0;
1256
1257         ret = qca_check_speeds(hu);
1258         if (ret)
1259                 return ret;
1260
1261         /* Patch downloading has to be done without IBS mode */
1262         clear_bit(QCA_IBS_ENABLED, &qca->flags);
1263
1264         if (qca_is_wcn399x(soc_type)) {
1265                 bt_dev_info(hdev, "setting up wcn3990");
1266
1267                 /* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute
1268                  * setup for every hci up.
1269                  */
1270                 set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
1271                 set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
1272                 hu->hdev->shutdown = qca_power_off;
1273                 ret = qca_wcn3990_init(hu);
1274                 if (ret)
1275                         return ret;
1276
1277                 ret = qca_read_soc_version(hdev, &soc_ver);
1278                 if (ret)
1279                         return ret;
1280         } else {
1281                 bt_dev_info(hdev, "ROME setup");
1282                 qca_set_speed(hu, QCA_INIT_SPEED);
1283         }
1284
1285         /* Setup user speed if needed */
1286         speed = qca_get_speed(hu, QCA_OPER_SPEED);
1287         if (speed) {
1288                 ret = qca_set_speed(hu, QCA_OPER_SPEED);
1289                 if (ret)
1290                         return ret;
1291
1292                 qca_baudrate = qca_get_baudrate_value(speed);
1293         }
1294
1295         if (!qca_is_wcn399x(soc_type)) {
1296                 /* Get QCA version information */
1297                 ret = qca_read_soc_version(hdev, &soc_ver);
1298                 if (ret)
1299                         return ret;
1300         }
1301
1302         bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
1303         /* Setup patch / NVM configurations */
1304         ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver,
1305                         firmware_name);
1306         if (!ret) {
1307                 set_bit(QCA_IBS_ENABLED, &qca->flags);
1308                 qca_debugfs_init(hdev);
1309         } else if (ret == -ENOENT) {
1310                 /* No patch/nvm-config found, run with original fw/config */
1311                 ret = 0;
1312         } else if (ret == -EAGAIN) {
1313                 /*
1314                  * Userspace firmware loader will return -EAGAIN in case no
1315                  * patch/nvm-config is found, so run with original fw/config.
1316                  */
1317                 ret = 0;
1318         }
1319
1320         /* Setup bdaddr */
1321         if (qca_is_wcn399x(soc_type))
1322                 hu->hdev->set_bdaddr = qca_set_bdaddr;
1323         else
1324                 hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
1325
1326         return ret;
1327 }
1328
1329 static struct hci_uart_proto qca_proto = {
1330         .id             = HCI_UART_QCA,
1331         .name           = "QCA",
1332         .manufacturer   = 29,
1333         .init_speed     = 115200,
1334         .oper_speed     = 3000000,
1335         .open           = qca_open,
1336         .close          = qca_close,
1337         .flush          = qca_flush,
1338         .setup          = qca_setup,
1339         .recv           = qca_recv,
1340         .enqueue        = qca_enqueue,
1341         .dequeue        = qca_dequeue,
1342 };
1343
1344 static const struct qca_vreg_data qca_soc_data_wcn3990 = {
1345         .soc_type = QCA_WCN3990,
1346         .vregs = (struct qca_vreg []) {
1347                 { "vddio",   1800000, 1900000,  15000  },
1348                 { "vddxo",   1800000, 1900000,  80000  },
1349                 { "vddrf",   1300000, 1350000,  300000 },
1350                 { "vddch0",  3300000, 3400000,  450000 },
1351         },
1352         .num_vregs = 4,
1353 };
1354
1355 static const struct qca_vreg_data qca_soc_data_wcn3998 = {
1356         .soc_type = QCA_WCN3998,
1357         .vregs = (struct qca_vreg []) {
1358                 { "vddio",   1800000, 1900000,  10000  },
1359                 { "vddxo",   1800000, 1900000,  80000  },
1360                 { "vddrf",   1300000, 1352000,  300000 },
1361                 { "vddch0",  3300000, 3300000,  450000 },
1362         },
1363         .num_vregs = 4,
1364 };
1365
1366 static void qca_power_shutdown(struct hci_uart *hu)
1367 {
1368         struct qca_data *qca = hu->priv;
1369         unsigned long flags;
1370
1371         /* From this point we go into power off state. But serial port is
1372          * still open, stop queueing the IBS data and flush all the buffered
1373          * data in skb's.
1374          */
1375         spin_lock_irqsave(&qca->hci_ibs_lock, flags);
1376         clear_bit(QCA_IBS_ENABLED, &qca->flags);
1377         qca_flush(hu);
1378         spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
1379
1380         host_set_baudrate(hu, 2400);
1381         qca_send_power_pulse(hu, false);
1382         qca_power_setup(hu, false);
1383 }
1384
1385 static int qca_power_off(struct hci_dev *hdev)
1386 {
1387         struct hci_uart *hu = hci_get_drvdata(hdev);
1388
1389         /* Perform pre shutdown command */
1390         qca_send_pre_shutdown_cmd(hdev);
1391
1392         qca_power_shutdown(hu);
1393         return 0;
1394 }
1395
1396 static int qca_enable_regulator(struct qca_vreg vregs,
1397                                 struct regulator *regulator)
1398 {
1399         int ret;
1400
1401         ret = regulator_set_voltage(regulator, vregs.min_uV,
1402                                     vregs.max_uV);
1403         if (ret)
1404                 return ret;
1405
1406         if (vregs.load_uA)
1407                 ret = regulator_set_load(regulator,
1408                                          vregs.load_uA);
1409
1410         if (ret)
1411                 return ret;
1412
1413         return regulator_enable(regulator);
1414
1415 }
1416
1417 static void qca_disable_regulator(struct qca_vreg vregs,
1418                                   struct regulator *regulator)
1419 {
1420         regulator_disable(regulator);
1421         regulator_set_voltage(regulator, 0, vregs.max_uV);
1422         if (vregs.load_uA)
1423                 regulator_set_load(regulator, 0);
1424
1425 }
1426
1427 static int qca_power_setup(struct hci_uart *hu, bool on)
1428 {
1429         struct qca_vreg *vregs;
1430         struct regulator_bulk_data *vreg_bulk;
1431         struct qca_serdev *qcadev;
1432         int i, num_vregs, ret = 0;
1433
1434         qcadev = serdev_device_get_drvdata(hu->serdev);
1435         if (!qcadev || !qcadev->bt_power || !qcadev->bt_power->vreg_data ||
1436             !qcadev->bt_power->vreg_bulk)
1437                 return -EINVAL;
1438
1439         vregs = qcadev->bt_power->vreg_data->vregs;
1440         vreg_bulk = qcadev->bt_power->vreg_bulk;
1441         num_vregs = qcadev->bt_power->vreg_data->num_vregs;
1442         BT_DBG("on: %d", on);
1443         if (on && !qcadev->bt_power->vregs_on) {
1444                 for (i = 0; i < num_vregs; i++) {
1445                         ret = qca_enable_regulator(vregs[i],
1446                                                    vreg_bulk[i].consumer);
1447                         if (ret)
1448                                 break;
1449                 }
1450
1451                 if (ret) {
1452                         BT_ERR("failed to enable regulator:%s", vregs[i].name);
1453                         /* turn off regulators which are enabled */
1454                         for (i = i - 1; i >= 0; i--)
1455                                 qca_disable_regulator(vregs[i],
1456                                                       vreg_bulk[i].consumer);
1457                 } else {
1458                         qcadev->bt_power->vregs_on = true;
1459                 }
1460         } else if (!on && qcadev->bt_power->vregs_on) {
1461                 /* turn off regulator in reverse order */
1462                 i = qcadev->bt_power->vreg_data->num_vregs - 1;
1463                 for ( ; i >= 0; i--)
1464                         qca_disable_regulator(vregs[i], vreg_bulk[i].consumer);
1465
1466                 qcadev->bt_power->vregs_on = false;
1467         }
1468
1469         return ret;
1470 }
1471
1472 static int qca_init_regulators(struct qca_power *qca,
1473                                 const struct qca_vreg *vregs, size_t num_vregs)
1474 {
1475         int i;
1476
1477         qca->vreg_bulk = devm_kcalloc(qca->dev, num_vregs,
1478                                       sizeof(struct regulator_bulk_data),
1479                                       GFP_KERNEL);
1480         if (!qca->vreg_bulk)
1481                 return -ENOMEM;
1482
1483         for (i = 0; i < num_vregs; i++)
1484                 qca->vreg_bulk[i].supply = vregs[i].name;
1485
1486         return devm_regulator_bulk_get(qca->dev, num_vregs, qca->vreg_bulk);
1487 }
1488
1489 static int qca_serdev_probe(struct serdev_device *serdev)
1490 {
1491         struct qca_serdev *qcadev;
1492         const struct qca_vreg_data *data;
1493         int err;
1494
1495         qcadev = devm_kzalloc(&serdev->dev, sizeof(*qcadev), GFP_KERNEL);
1496         if (!qcadev)
1497                 return -ENOMEM;
1498
1499         qcadev->serdev_hu.serdev = serdev;
1500         data = of_device_get_match_data(&serdev->dev);
1501         serdev_device_set_drvdata(serdev, qcadev);
1502         device_property_read_string(&serdev->dev, "firmware-name",
1503                                          &qcadev->firmware_name);
1504         if (data && qca_is_wcn399x(data->soc_type)) {
1505                 qcadev->btsoc_type = data->soc_type;
1506                 qcadev->bt_power = devm_kzalloc(&serdev->dev,
1507                                                 sizeof(struct qca_power),
1508                                                 GFP_KERNEL);
1509                 if (!qcadev->bt_power)
1510                         return -ENOMEM;
1511
1512                 qcadev->bt_power->dev = &serdev->dev;
1513                 qcadev->bt_power->vreg_data = data;
1514                 err = qca_init_regulators(qcadev->bt_power, data->vregs,
1515                                           data->num_vregs);
1516                 if (err) {
1517                         BT_ERR("Failed to init regulators:%d", err);
1518                         goto out;
1519                 }
1520
1521                 qcadev->bt_power->vregs_on = false;
1522
1523                 device_property_read_u32(&serdev->dev, "max-speed",
1524                                          &qcadev->oper_speed);
1525                 if (!qcadev->oper_speed)
1526                         BT_DBG("UART will pick default operating speed");
1527
1528                 err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
1529                 if (err) {
1530                         BT_ERR("wcn3990 serdev registration failed");
1531                         goto out;
1532                 }
1533         } else {
1534                 qcadev->btsoc_type = QCA_ROME;
1535                 qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable",
1536                                                GPIOD_OUT_LOW);
1537                 if (IS_ERR(qcadev->bt_en)) {
1538                         dev_err(&serdev->dev, "failed to acquire enable gpio\n");
1539                         return PTR_ERR(qcadev->bt_en);
1540                 }
1541
1542                 qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
1543                 if (IS_ERR(qcadev->susclk)) {
1544                         dev_err(&serdev->dev, "failed to acquire clk\n");
1545                         return PTR_ERR(qcadev->susclk);
1546                 }
1547
1548                 err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
1549                 if (err)
1550                         return err;
1551
1552                 err = clk_prepare_enable(qcadev->susclk);
1553                 if (err)
1554                         return err;
1555
1556                 err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
1557                 if (err)
1558                         clk_disable_unprepare(qcadev->susclk);
1559         }
1560
1561 out:    return err;
1562
1563 }
1564
1565 static void qca_serdev_remove(struct serdev_device *serdev)
1566 {
1567         struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
1568
1569         if (qca_is_wcn399x(qcadev->btsoc_type))
1570                 qca_power_shutdown(&qcadev->serdev_hu);
1571         else
1572                 clk_disable_unprepare(qcadev->susclk);
1573
1574         hci_uart_unregister_device(&qcadev->serdev_hu);
1575 }
1576
1577 static const struct of_device_id qca_bluetooth_of_match[] = {
1578         { .compatible = "qcom,qca6174-bt" },
1579         { .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
1580         { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
1581         { /* sentinel */ }
1582 };
1583 MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
1584
1585 static struct serdev_device_driver qca_serdev_driver = {
1586         .probe = qca_serdev_probe,
1587         .remove = qca_serdev_remove,
1588         .driver = {
1589                 .name = "hci_uart_qca",
1590                 .of_match_table = qca_bluetooth_of_match,
1591         },
1592 };
1593
1594 int __init qca_init(void)
1595 {
1596         serdev_device_driver_register(&qca_serdev_driver);
1597
1598         return hci_uart_register_proto(&qca_proto);
1599 }
1600
1601 int __exit qca_deinit(void)
1602 {
1603         serdev_device_driver_unregister(&qca_serdev_driver);
1604
1605         return hci_uart_unregister_proto(&qca_proto);
1606 }