drivers/bluetooth/dtl1_cs.c

   1 /*
   2  *
   3  *  A driver for Nokia Connectivity Card DTL-1 devices
   4  *
   5  *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
   6  *
   7  *
   8  *  This program is free software; you can redistribute it and/or modify
   9  *  it under the terms of the GNU General Public License version 2 as
  10  *  published by the Free Software Foundation;
  11  *
  12  *  Software distributed under the License is distributed on an "AS
  13  *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
  14  *  implied. See the License for the specific language governing
  15  *  rights and limitations under the License.
  16  *
  17  *  The initial developer of the original code is David A. Hinds
  18  *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
  19  *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  20  *
  21  */
  22
  23 #include <linux/module.h>
  24
  25 #include <linux/kernel.h>
  26 #include <linux/init.h>
  27 #include <linux/slab.h>
  28 #include <linux/types.h>
  29 #include <linux/delay.h>
  30 #include <linux/errno.h>
  31 #include <linux/ptrace.h>
  32 #include <linux/ioport.h>
  33 #include <linux/spinlock.h>
  34 #include <linux/moduleparam.h>
  35
  36 #include <linux/skbuff.h>
  37 #include <linux/string.h>
  38 #include <linux/serial.h>
  39 #include <linux/serial_reg.h>
  40 #include <linux/bitops.h>
  41 #include <asm/system.h>
  42 #include <asm/io.h>
  43
  44 #include <pcmcia/cs_types.h>
  45 #include <pcmcia/cs.h>
  46 #include <pcmcia/cistpl.h>
  47 #include <pcmcia/ciscode.h>
  48 #include <pcmcia/ds.h>
  49 #include <pcmcia/cisreg.h>
  50
  51 #include <net/bluetooth/bluetooth.h>
  52 #include <net/bluetooth/hci_core.h>
  53
  54
  55
  56 /* ======================== Module parameters ======================== */
  57
  58
  59 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
  60 MODULE_DESCRIPTION("Bluetooth driver for Nokia Connectivity Card DTL-1");
  61 MODULE_LICENSE("GPL");
  62
  63
  64
  65 /* ======================== Local structures ======================== */
  66
  67
  68 typedef struct dtl1_info_t {
  69         struct pcmcia_device *p_dev;
  70         dev_node_t node;
  71
  72         struct hci_dev *hdev;
  73
  74         spinlock_t lock;                /* For serializing operations */
  75
  76         unsigned long flowmask;         /* HCI flow mask */
  77         int ri_latch;
  78
  79         struct sk_buff_head txq;
  80         unsigned long tx_state;
  81
  82         unsigned long rx_state;
  83         unsigned long rx_count;
  84         struct sk_buff *rx_skb;
  85 } dtl1_info_t;
  86
  87
  88 static int dtl1_config(struct pcmcia_device *link);
  89 static void dtl1_release(struct pcmcia_device *link);
  90
  91 static void dtl1_detach(struct pcmcia_device *p_dev);
  92
  93
  94 /* Transmit states  */
  95 #define XMIT_SENDING  1
  96 #define XMIT_WAKEUP   2
  97 #define XMIT_WAITING  8
  98
  99 /* Receiver States */
 100 #define RECV_WAIT_NSH   0
 101 #define RECV_WAIT_DATA  1
 102
 103
 104 typedef struct {
 105         u8 type;
 106         u8 zero;
 107         u16 len;
 108 } __attribute__ ((packed)) nsh_t;       /* Nokia Specific Header */
 109
 110 #define NSHL  4                         /* Nokia Specific Header Length */
 111
 112
 113
 114 /* ======================== Interrupt handling ======================== */
 115
 116
 117 static int dtl1_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
 118 {
 119         int actual = 0;
 120
 121         /* Tx FIFO should be empty */
 122         if (!(inb(iobase + UART_LSR) & UART_LSR_THRE))
 123                 return 0;
 124
 125         /* Fill FIFO with current frame */
 126         while ((fifo_size-- > 0) && (actual < len)) {
 127                 /* Transmit next byte */
 128                 outb(buf[actual], iobase + UART_TX);
 129                 actual++;
 130         }
 131
 132         return actual;
 133 }
 134
 135
 136 static void dtl1_write_wakeup(dtl1_info_t *info)
 137 {
 138         if (!info) {
 139                 BT_ERR("Unknown device");
 140                 return;
 141         }
 142
 143         if (test_bit(XMIT_WAITING, &(info->tx_state))) {
 144                 set_bit(XMIT_WAKEUP, &(info->tx_state));
 145                 return;
 146         }
 147
 148         if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
 149                 set_bit(XMIT_WAKEUP, &(info->tx_state));
 150                 return;
 151         }
 152
 153         do {
 154                 register unsigned int iobase = info->p_dev->io.BasePort1;
 155                 register struct sk_buff *skb;
 156                 register int len;
 157
 158                 clear_bit(XMIT_WAKEUP, &(info->tx_state));
 159
 160                 if (!pcmcia_dev_present(info->p_dev))
 161                         return;
 162
 163                 if (!(skb = skb_dequeue(&(info->txq))))
 164                         break;
 165
 166                 /* Send frame */
 167                 len = dtl1_write(iobase, 32, skb->data, skb->len);
 168
 169                 if (len == skb->len) {
 170                         set_bit(XMIT_WAITING, &(info->tx_state));
 171                         kfree_skb(skb);
 172                 } else {
 173                         skb_pull(skb, len);
 174                         skb_queue_head(&(info->txq), skb);
 175                 }
 176
 177                 info->hdev->stat.byte_tx += len;
 178
 179         } while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
 180
 181         clear_bit(XMIT_SENDING, &(info->tx_state));
 182 }
 183
 184
 185 static void dtl1_control(dtl1_info_t *info, struct sk_buff *skb)
 186 {
 187         u8 flowmask = *(u8 *)skb->data;
 188         int i;
 189
 190         printk(KERN_INFO "Bluetooth: Nokia control data =");
 191         for (i = 0; i < skb->len; i++) {
 192                 printk(" %02x", skb->data[i]);
 193         }
 194         printk("\n");
 195
 196         /* transition to active state */
 197         if (((info->flowmask & 0x07) == 0) && ((flowmask & 0x07) != 0)) {
 198                 clear_bit(XMIT_WAITING, &(info->tx_state));
 199                 dtl1_write_wakeup(info);
 200         }
 201
 202         info->flowmask = flowmask;
 203
 204         kfree_skb(skb);
 205 }
 206
 207
 208 static void dtl1_receive(dtl1_info_t *info)
 209 {
 210         unsigned int iobase;
 211         nsh_t *nsh;
 212         int boguscount = 0;
 213
 214         if (!info) {
 215                 BT_ERR("Unknown device");
 216                 return;
 217         }
 218
 219         iobase = info->p_dev->io.BasePort1;
 220
 221         do {
 222                 info->hdev->stat.byte_rx++;
 223
 224                 /* Allocate packet */
 225                 if (info->rx_skb == NULL)
 226                         if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
 227                                 BT_ERR("Can't allocate mem for new packet");
 228                                 info->rx_state = RECV_WAIT_NSH;
 229                                 info->rx_count = NSHL;
 230                                 return;
 231                         }
 232
 233                 *skb_put(info->rx_skb, 1) = inb(iobase + UART_RX);
 234                 nsh = (nsh_t *)info->rx_skb->data;
 235
 236                 info->rx_count--;
 237
 238                 if (info->rx_count == 0) {
 239
 240                         switch (info->rx_state) {
 241                         case RECV_WAIT_NSH:
 242                                 info->rx_state = RECV_WAIT_DATA;
 243                                 info->rx_count = nsh->len + (nsh->len & 0x0001);
 244                                 break;
 245                         case RECV_WAIT_DATA:
 246                                 bt_cb(info->rx_skb)->pkt_type = nsh->type;
 247
 248                                 /* remove PAD byte if it exists */
 249                                 if (nsh->len & 0x0001) {
 250                                         info->rx_skb->tail--;
 251                                         info->rx_skb->len--;
 252                                 }
 253
 254                                 /* remove NSH */
 255                                 skb_pull(info->rx_skb, NSHL);
 256
 257                                 switch (bt_cb(info->rx_skb)->pkt_type) {
 258                                 case 0x80:
 259                                         /* control data for the Nokia Card */
 260                                         dtl1_control(info, info->rx_skb);
 261                                         break;
 262                                 case 0x82:
 263                                 case 0x83:
 264                                 case 0x84:
 265                                         /* send frame to the HCI layer */
 266                                         info->rx_skb->dev = (void *) info->hdev;
 267                                         bt_cb(info->rx_skb)->pkt_type &= 0x0f;
 268                                         hci_recv_frame(info->rx_skb);
 269                                         break;
 270                                 default:
 271                                         /* unknown packet */
 272                                         BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type);
 273                                         kfree_skb(info->rx_skb);
 274                                         break;
 275                                 }
 276
 277                                 info->rx_state = RECV_WAIT_NSH;
 278                                 info->rx_count = NSHL;
 279                                 info->rx_skb = NULL;
 280                                 break;
 281                         }
 282
 283                 }
 284
 285                 /* Make sure we don't stay here too long */
 286                 if (boguscount++ > 32)
 287                         break;
 288
 289         } while (inb(iobase + UART_LSR) & UART_LSR_DR);
 290 }
 291
 292
 293 static irqreturn_t dtl1_interrupt(int irq, void *dev_inst)
 294 {
 295         dtl1_info_t *info = dev_inst;
 296         unsigned int iobase;
 297         unsigned char msr;
 298         int boguscount = 0;
 299         int iir, lsr;
 300         irqreturn_t r = IRQ_NONE;
 301
 302         if (!info || !info->hdev)
 303                 /* our irq handler is shared */
 304                 return IRQ_NONE;
 305
 306         iobase = info->p_dev->io.BasePort1;
 307
 308         spin_lock(&(info->lock));
 309
 310         iir = inb(iobase + UART_IIR) & UART_IIR_ID;
 311         while (iir) {
 312
 313                 r = IRQ_HANDLED;
 314                 /* Clear interrupt */
 315                 lsr = inb(iobase + UART_LSR);
 316
 317                 switch (iir) {
 318                 case UART_IIR_RLSI:
 319                         BT_ERR("RLSI");
 320                         break;
 321                 case UART_IIR_RDI:
 322                         /* Receive interrupt */
 323                         dtl1_receive(info);
 324                         break;
 325                 case UART_IIR_THRI:
 326                         if (lsr & UART_LSR_THRE) {
 327                                 /* Transmitter ready for data */
 328                                 dtl1_write_wakeup(info);
 329                         }
 330                         break;
 331                 default:
 332                         BT_ERR("Unhandled IIR=%#x", iir);
 333                         break;
 334                 }
 335
 336                 /* Make sure we don't stay here too long */
 337                 if (boguscount++ > 100)
 338                         break;
 339
 340                 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
 341
 342         }
 343
 344         msr = inb(iobase + UART_MSR);
 345
 346         if (info->ri_latch ^ (msr & UART_MSR_RI)) {
 347                 info->ri_latch = msr & UART_MSR_RI;
 348                 clear_bit(XMIT_WAITING, &(info->tx_state));
 349                 dtl1_write_wakeup(info);
 350                 r = IRQ_HANDLED;
 351         }
 352
 353         spin_unlock(&(info->lock));
 354
 355         return r;
 356 }
 357
 358
 359
 360 /* ======================== HCI interface ======================== */
 361
 362
 363 static int dtl1_hci_open(struct hci_dev *hdev)
 364 {
 365         set_bit(HCI_RUNNING, &(hdev->flags));
 366
 367         return 0;
 368 }
 369
 370
 371 static int dtl1_hci_flush(struct hci_dev *hdev)
 372 {
 373         dtl1_info_t *info = (dtl1_info_t *)(hdev->driver_data);
 374
 375         /* Drop TX queue */
 376         skb_queue_purge(&(info->txq));
 377
 378         return 0;
 379 }
 380
 381
 382 static int dtl1_hci_close(struct hci_dev *hdev)
 383 {
 384         if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
 385                 return 0;
 386
 387         dtl1_hci_flush(hdev);
 388
 389         return 0;
 390 }
 391
 392
 393 static int dtl1_hci_send_frame(struct sk_buff *skb)
 394 {
 395         dtl1_info_t *info;
 396         struct hci_dev *hdev = (struct hci_dev *)(skb->dev);
 397         struct sk_buff *s;
 398         nsh_t nsh;
 399
 400         if (!hdev) {
 401                 BT_ERR("Frame for unknown HCI device (hdev=NULL)");
 402                 return -ENODEV;
 403         }
 404
 405         info = (dtl1_info_t *)(hdev->driver_data);
 406
 407         switch (bt_cb(skb)->pkt_type) {
 408         case HCI_COMMAND_PKT:
 409                 hdev->stat.cmd_tx++;
 410                 nsh.type = 0x81;
 411                 break;
 412         case HCI_ACLDATA_PKT:
 413                 hdev->stat.acl_tx++;
 414                 nsh.type = 0x82;
 415                 break;
 416         case HCI_SCODATA_PKT:
 417                 hdev->stat.sco_tx++;
 418                 nsh.type = 0x83;
 419                 break;
 420         default:
 421                 return -EILSEQ;
 422         };
 423
 424         nsh.zero = 0;
 425         nsh.len = skb->len;
 426
 427         s = bt_skb_alloc(NSHL + skb->len + 1, GFP_ATOMIC);
 428         if (!s)
 429                 return -ENOMEM;
 430
 431         skb_reserve(s, NSHL);
 432         skb_copy_from_linear_data(skb, skb_put(s, skb->len), skb->len);
 433         if (skb->len & 0x0001)
 434                 *skb_put(s, 1) = 0;     /* PAD */
 435
 436         /* Prepend skb with Nokia frame header and queue */
 437         memcpy(skb_push(s, NSHL), &nsh, NSHL);
 438         skb_queue_tail(&(info->txq), s);
 439
 440         dtl1_write_wakeup(info);
 441
 442         kfree_skb(skb);
 443
 444         return 0;
 445 }
 446
 447
 448 static void dtl1_hci_destruct(struct hci_dev *hdev)
 449 {
 450 }
 451
 452
 453 static int dtl1_hci_ioctl(struct hci_dev *hdev, unsigned int cmd,  unsigned long arg)
 454 {
 455         return -ENOIOCTLCMD;
 456 }
 457
 458
 459
 460 /* ======================== Card services HCI interaction ======================== */
 461
 462
 463 static int dtl1_open(dtl1_info_t *info)
 464 {
 465         unsigned long flags;
 466         unsigned int iobase = info->p_dev->io.BasePort1;
 467         struct hci_dev *hdev;
 468
 469         spin_lock_init(&(info->lock));
 470
 471         skb_queue_head_init(&(info->txq));
 472
 473         info->rx_state = RECV_WAIT_NSH;
 474         info->rx_count = NSHL;
 475         info->rx_skb = NULL;
 476
 477         set_bit(XMIT_WAITING, &(info->tx_state));
 478
 479         /* Initialize HCI device */
 480         hdev = hci_alloc_dev();
 481         if (!hdev) {
 482                 BT_ERR("Can't allocate HCI device");
 483                 return -ENOMEM;
 484         }
 485
 486         info->hdev = hdev;
 487
 488         hdev->type = HCI_PCCARD;
 489         hdev->driver_data = info;
 490         SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
 491
 492         hdev->open     = dtl1_hci_open;
 493         hdev->close    = dtl1_hci_close;
 494         hdev->flush    = dtl1_hci_flush;
 495         hdev->send     = dtl1_hci_send_frame;
 496         hdev->destruct = dtl1_hci_destruct;
 497         hdev->ioctl    = dtl1_hci_ioctl;
 498
 499         hdev->owner = THIS_MODULE;
 500
 501         spin_lock_irqsave(&(info->lock), flags);
 502
 503         /* Reset UART */
 504         outb(0, iobase + UART_MCR);
 505
 506         /* Turn off interrupts */
 507         outb(0, iobase + UART_IER);
 508
 509         /* Initialize UART */
 510         outb(UART_LCR_WLEN8, iobase + UART_LCR);        /* Reset DLAB */
 511         outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR);
 512
 513         info->ri_latch = inb(info->p_dev->io.BasePort1 + UART_MSR) & UART_MSR_RI;
 514
 515         /* Turn on interrupts */
 516         outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
 517
 518         spin_unlock_irqrestore(&(info->lock), flags);
 519
 520         /* Timeout before it is safe to send the first HCI packet */
 521         msleep(2000);
 522
 523         /* Register HCI device */
 524         if (hci_register_dev(hdev) < 0) {
 525                 BT_ERR("Can't register HCI device");
 526                 info->hdev = NULL;
 527                 hci_free_dev(hdev);
 528                 return -ENODEV;
 529         }
 530
 531         return 0;
 532 }
 533
 534
 535 static int dtl1_close(dtl1_info_t *info)
 536 {
 537         unsigned long flags;
 538         unsigned int iobase = info->p_dev->io.BasePort1;
 539         struct hci_dev *hdev = info->hdev;
 540
 541         if (!hdev)
 542                 return -ENODEV;
 543
 544         dtl1_hci_close(hdev);
 545
 546         spin_lock_irqsave(&(info->lock), flags);
 547
 548         /* Reset UART */
 549         outb(0, iobase + UART_MCR);
 550
 551         /* Turn off interrupts */
 552         outb(0, iobase + UART_IER);
 553
 554         spin_unlock_irqrestore(&(info->lock), flags);
 555
 556         if (hci_unregister_dev(hdev) < 0)
 557                 BT_ERR("Can't unregister HCI device %s", hdev->name);
 558
 559         hci_free_dev(hdev);
 560
 561         return 0;
 562 }
 563
 564 static int dtl1_probe(struct pcmcia_device *link)
 565 {
 566         dtl1_info_t *info;
 567
 568         /* Create new info device */
 569         info = kzalloc(sizeof(*info), GFP_KERNEL);
 570         if (!info)
 571                 return -ENOMEM;
 572
 573         info->p_dev = link;
 574         link->priv = info;
 575
 576         link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 577         link->io.NumPorts1 = 8;
 578         link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 579
 580         link->irq.Handler = dtl1_interrupt;
 581
 582         link->conf.Attributes = CONF_ENABLE_IRQ;
 583         link->conf.IntType = INT_MEMORY_AND_IO;
 584
 585         return dtl1_config(link);
 586 }
 587
 588
 589 static void dtl1_detach(struct pcmcia_device *link)
 590 {
 591         dtl1_info_t *info = link->priv;
 592
 593         dtl1_release(link);
 594
 595         kfree(info);
 596 }
 597
 598 static int dtl1_confcheck(struct pcmcia_device *p_dev,
 599                           cistpl_cftable_entry_t *cf,
 600                           cistpl_cftable_entry_t *dflt,
 601                           unsigned int vcc,
 602                           void *priv_data)
 603 {
 604         if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
 605                 p_dev->io.BasePort1 = cf->io.win[0].base;
 606                 p_dev->io.NumPorts1 = cf->io.win[0].len;        /*yo */
 607                 p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
 608                 if (!pcmcia_request_io(p_dev, &p_dev->io))
 609                         return 0;
 610         }
 611         return -ENODEV;
 612 }
 613
 614 static int dtl1_config(struct pcmcia_device *link)
 615 {
 616         dtl1_info_t *info = link->priv;
 617         int i;
 618
 619         /* Look for a generic full-sized window */
 620         link->io.NumPorts1 = 8;
 621         if (pcmcia_loop_config(link, dtl1_confcheck, NULL) < 0)
 622                 goto failed;
 623
 624         i = pcmcia_request_irq(link, &link->irq);
 625         if (i != 0)
 626                 link->irq.AssignedIRQ = 0;
 627
 628         i = pcmcia_request_configuration(link, &link->conf);
 629         if (i != 0)
 630                 goto failed;
 631
 632         if (dtl1_open(info) != 0)
 633                 goto failed;
 634
 635         strcpy(info->node.dev_name, info->hdev->name);
 636         link->dev_node = &info->node;
 637
 638         return 0;
 639
 640 failed:
 641         dtl1_release(link);
 642         return -ENODEV;
 643 }
 644
 645
 646 static void dtl1_release(struct pcmcia_device *link)
 647 {
 648         dtl1_info_t *info = link->priv;
 649
 650         dtl1_close(info);
 651
 652         pcmcia_disable_device(link);
 653 }
 654
 655
 656 static struct pcmcia_device_id dtl1_ids[] = {
 657         PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-1", 0xe1bfdd64, 0xe168480d),
 658         PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-4", 0xe1bfdd64, 0x9102bc82),
 659         PCMCIA_DEVICE_PROD_ID12("Socket", "CF", 0xb38bcc2e, 0x44ebf863),
 660         PCMCIA_DEVICE_PROD_ID12("Socket", "CF+ Personal Network Card", 0xb38bcc2e, 0xe732bae3),
 661         PCMCIA_DEVICE_NULL
 662 };
 663 MODULE_DEVICE_TABLE(pcmcia, dtl1_ids);
 664
 665 static struct pcmcia_driver dtl1_driver = {
 666         .owner          = THIS_MODULE,
 667         .drv            = {
 668                 .name   = "dtl1_cs",
 669         },
 670         .probe          = dtl1_probe,
 671         .remove         = dtl1_detach,
 672         .id_table       = dtl1_ids,
 673 };
 674
 675 static int __init init_dtl1_cs(void)
 676 {
 677         return pcmcia_register_driver(&dtl1_driver);
 678 }
 679
 680
 681 static void __exit exit_dtl1_cs(void)
 682 {
 683         pcmcia_unregister_driver(&dtl1_driver);
 684 }
 685
 686 module_init(init_dtl1_cs);
 687 module_exit(exit_dtl1_cs);