drivers/bluetooth/btusb.c

   1 /*
   2  *
   3  *  Generic Bluetooth USB driver
   4  *
   5  *  Copyright (C) 2005-2008  Marcel Holtmann <marcel@holtmann.org>
   6  *
   7  *
   8  *  This program is free software; you can redistribute it and/or modify
   9  *  it under the terms of the GNU General Public License as published by
  10  *  the Free Software Foundation; either version 2 of the License, or
  11  *  (at your option) any later version.
  12  *
  13  *  This program is distributed in the hope that it will be useful,
  14  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  *  GNU General Public License for more details.
  17  *
  18  *  You should have received a copy of the GNU General Public License
  19  *  along with this program; if not, write to the Free Software
  20  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  21  *
  22  */
  23
  24 #include <linux/module.h>
  25 #include <linux/usb.h>
  26 #include <linux/firmware.h>
  27 #include <asm/unaligned.h>
  28
  29 #include <net/bluetooth/bluetooth.h>
  30 #include <net/bluetooth/hci_core.h>
  31
  32 #include "btintel.h"
  33 #include "btbcm.h"
  34
  35 #define VERSION "0.8"
  36
  37 static bool disable_scofix;
  38 static bool force_scofix;
  39
  40 static bool reset = 1;
  41
  42 static struct usb_driver btusb_driver;
  43
  44 #define BTUSB_IGNORE            0x01
  45 #define BTUSB_DIGIANSWER        0x02
  46 #define BTUSB_CSR               0x04
  47 #define BTUSB_SNIFFER           0x08
  48 #define BTUSB_BCM92035          0x10
  49 #define BTUSB_BROKEN_ISOC       0x20
  50 #define BTUSB_WRONG_SCO_MTU     0x40
  51 #define BTUSB_ATH3012           0x80
  52 #define BTUSB_INTEL             0x100
  53 #define BTUSB_INTEL_BOOT        0x200
  54 #define BTUSB_BCM_PATCHRAM      0x400
  55 #define BTUSB_MARVELL           0x800
  56 #define BTUSB_SWAVE             0x1000
  57 #define BTUSB_INTEL_NEW         0x2000
  58 #define BTUSB_AMP               0x4000
  59 #define BTUSB_QCA_ROME          0x8000
  60 #define BTUSB_BCM_APPLE         0x10000
  61 #define BTUSB_REALTEK           0x20000
  62
  63 static const struct usb_device_id btusb_table[] = {
  64         /* Generic Bluetooth USB device */
  65         { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
  66
  67         /* Generic Bluetooth AMP device */
  68         { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },
  69
  70         /* Apple-specific (Broadcom) devices */
  71         { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
  72           .driver_info = BTUSB_BCM_APPLE },
  73
  74         /* MediaTek MT76x0E */
  75         { USB_DEVICE(0x0e8d, 0x763f) },
  76
  77         /* Broadcom SoftSailing reporting vendor specific */
  78         { USB_DEVICE(0x0a5c, 0x21e1) },
  79
  80         /* Apple MacBookPro 7,1 */
  81         { USB_DEVICE(0x05ac, 0x8213) },
  82
  83         /* Apple iMac11,1 */
  84         { USB_DEVICE(0x05ac, 0x8215) },
  85
  86         /* Apple MacBookPro6,2 */
  87         { USB_DEVICE(0x05ac, 0x8218) },
  88
  89         /* Apple MacBookAir3,1, MacBookAir3,2 */
  90         { USB_DEVICE(0x05ac, 0x821b) },
  91
  92         /* Apple MacBookAir4,1 */
  93         { USB_DEVICE(0x05ac, 0x821f) },
  94
  95         /* Apple MacBookPro8,2 */
  96         { USB_DEVICE(0x05ac, 0x821a) },
  97
  98         /* Apple MacMini5,1 */
  99         { USB_DEVICE(0x05ac, 0x8281) },
 100
 101         /* AVM BlueFRITZ! USB v2.0 */
 102         { USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE },
 103
 104         /* Bluetooth Ultraport Module from IBM */
 105         { USB_DEVICE(0x04bf, 0x030a) },
 106
 107         /* ALPS Modules with non-standard id */
 108         { USB_DEVICE(0x044e, 0x3001) },
 109         { USB_DEVICE(0x044e, 0x3002) },
 110
 111         /* Ericsson with non-standard id */
 112         { USB_DEVICE(0x0bdb, 0x1002) },
 113
 114         /* Canyon CN-BTU1 with HID interfaces */
 115         { USB_DEVICE(0x0c10, 0x0000) },
 116
 117         /* Broadcom BCM20702A0 */
 118         { USB_DEVICE(0x413c, 0x8197) },
 119
 120         /* Broadcom BCM20702B0 (Dynex/Insignia) */
 121         { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
 122
 123         /* Foxconn - Hon Hai */
 124         { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
 125           .driver_info = BTUSB_BCM_PATCHRAM },
 126
 127         /* Lite-On Technology - Broadcom based */
 128         { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
 129           .driver_info = BTUSB_BCM_PATCHRAM },
 130
 131         /* Broadcom devices with vendor specific id */
 132         { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
 133           .driver_info = BTUSB_BCM_PATCHRAM },
 134
 135         /* ASUSTek Computer - Broadcom based */
 136         { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
 137           .driver_info = BTUSB_BCM_PATCHRAM },
 138
 139         /* Belkin F8065bf - Broadcom based */
 140         { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
 141           .driver_info = BTUSB_BCM_PATCHRAM },
 142
 143         /* IMC Networks - Broadcom based */
 144         { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
 145           .driver_info = BTUSB_BCM_PATCHRAM },
 146
 147         /* Intel Bluetooth USB Bootloader (RAM module) */
 148         { USB_DEVICE(0x8087, 0x0a5a),
 149           .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
 150
 151         { }     /* Terminating entry */
 152 };
 153
 154 MODULE_DEVICE_TABLE(usb, btusb_table);
 155
 156 static const struct usb_device_id blacklist_table[] = {
 157         /* CSR BlueCore devices */
 158         { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR },
 159
 160         /* Broadcom BCM2033 without firmware */
 161         { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
 162
 163         /* Atheros 3011 with sflash firmware */
 164         { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
 165         { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
 166         { USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
 167         { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
 168         { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
 169         { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
 170         { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
 171
 172         /* Atheros AR9285 Malbec with sflash firmware */
 173         { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
 174
 175         /* Atheros 3012 with sflash firmware */
 176         { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
 177         { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
 178         { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
 179         { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 180         { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
 181         { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
 182         { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
 183         { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
 184         { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 185         { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
 186         { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
 187         { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 188         { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
 189         { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
 190         { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
 191         { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 192         { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
 193         { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
 194         { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
 195         { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
 196         { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
 197         { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
 198         { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
 199         { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
 200         { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
 201         { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
 202         { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
 203         { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
 204         { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 205         { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
 206         { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
 207         { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 208         { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 209         { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 210         { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 211         { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 212         { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 213         { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 214
 215         /* Atheros AR5BBU12 with sflash firmware */
 216         { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
 217
 218         /* Atheros AR5BBU12 with sflash firmware */
 219         { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
 220         { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
 221
 222         /* QCA ROME chipset */
 223         { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
 224         { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
 225         { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
 226
 227         /* Broadcom BCM2035 */
 228         { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
 229         { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
 230         { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
 231
 232         /* Broadcom BCM2045 */
 233         { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU },
 234         { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU },
 235
 236         /* IBM/Lenovo ThinkPad with Broadcom chip */
 237         { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU },
 238         { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU },
 239
 240         /* HP laptop with Broadcom chip */
 241         { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU },
 242
 243         /* Dell laptop with Broadcom chip */
 244         { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU },
 245
 246         /* Dell Wireless 370 and 410 devices */
 247         { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU },
 248         { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU },
 249
 250         /* Belkin F8T012 and F8T013 devices */
 251         { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU },
 252         { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU },
 253
 254         /* Asus WL-BTD202 device */
 255         { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU },
 256
 257         /* Kensington Bluetooth USB adapter */
 258         { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU },
 259
 260         /* RTX Telecom based adapters with buggy SCO support */
 261         { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC },
 262         { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC },
 263
 264         /* CONWISE Technology based adapters with buggy SCO support */
 265         { USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },
 266
 267         /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
 268         { USB_DEVICE(0x1300, 0x0001), .driver_info = BTUSB_SWAVE },
 269
 270         /* Digianswer devices */
 271         { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
 272         { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
 273
 274         /* CSR BlueCore Bluetooth Sniffer */
 275         { USB_DEVICE(0x0a12, 0x0002),
 276           .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
 277
 278         /* Frontline ComProbe Bluetooth Sniffer */
 279         { USB_DEVICE(0x16d3, 0x0002),
 280           .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
 281
 282         /* Marvell Bluetooth devices */
 283         { USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
 284         { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL },
 285
 286         /* Intel Bluetooth devices */
 287         { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
 288         { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
 289         { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
 290         { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW },
 291
 292         /* Other Intel Bluetooth devices */
 293         { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
 294           .driver_info = BTUSB_IGNORE },
 295
 296         /* Realtek Bluetooth devices */
 297         { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
 298           .driver_info = BTUSB_REALTEK },
 299
 300         /* Additional Realtek 8723AE Bluetooth devices */
 301         { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
 302         { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
 303
 304         /* Additional Realtek 8723BE Bluetooth devices */
 305         { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK },
 306         { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK },
 307         { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK },
 308         { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK },
 309         { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },
 310
 311         /* Additional Realtek 8821AE Bluetooth devices */
 312         { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
 313         { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
 314         { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK },
 315         { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
 316         { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
 317
 318         { }     /* Terminating entry */
 319 };
 320
 321 #define BTUSB_MAX_ISOC_FRAMES   10
 322
 323 #define BTUSB_INTR_RUNNING      0
 324 #define BTUSB_BULK_RUNNING      1
 325 #define BTUSB_ISOC_RUNNING      2
 326 #define BTUSB_SUSPENDING        3
 327 #define BTUSB_DID_ISO_RESUME    4
 328 #define BTUSB_BOOTLOADER        5
 329 #define BTUSB_DOWNLOADING       6
 330 #define BTUSB_FIRMWARE_LOADED   7
 331 #define BTUSB_FIRMWARE_FAILED   8
 332 #define BTUSB_BOOTING           9
 333
 334 struct btusb_data {
 335         struct hci_dev       *hdev;
 336         struct usb_device    *udev;
 337         struct usb_interface *intf;
 338         struct usb_interface *isoc;
 339
 340         unsigned long flags;
 341
 342         struct work_struct work;
 343         struct work_struct waker;
 344
 345         struct usb_anchor deferred;
 346         struct usb_anchor tx_anchor;
 347         int tx_in_flight;
 348         spinlock_t txlock;
 349
 350         struct usb_anchor intr_anchor;
 351         struct usb_anchor bulk_anchor;
 352         struct usb_anchor isoc_anchor;
 353         spinlock_t rxlock;
 354
 355         struct sk_buff *evt_skb;
 356         struct sk_buff *acl_skb;
 357         struct sk_buff *sco_skb;
 358
 359         struct usb_endpoint_descriptor *intr_ep;
 360         struct usb_endpoint_descriptor *bulk_tx_ep;
 361         struct usb_endpoint_descriptor *bulk_rx_ep;
 362         struct usb_endpoint_descriptor *isoc_tx_ep;
 363         struct usb_endpoint_descriptor *isoc_rx_ep;
 364
 365         __u8 cmdreq_type;
 366         __u8 cmdreq;
 367
 368         unsigned int sco_num;
 369         int isoc_altsetting;
 370         int suspend_count;
 371
 372         int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
 373         int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
 374
 375         int (*setup_on_usb)(struct hci_dev *hdev);
 376 };
 377
 378 static inline void btusb_free_frags(struct btusb_data *data)
 379 {
 380         unsigned long flags;
 381
 382         spin_lock_irqsave(&data->rxlock, flags);
 383
 384         kfree_skb(data->evt_skb);
 385         data->evt_skb = NULL;
 386
 387         kfree_skb(data->acl_skb);
 388         data->acl_skb = NULL;
 389
 390         kfree_skb(data->sco_skb);
 391         data->sco_skb = NULL;
 392
 393         spin_unlock_irqrestore(&data->rxlock, flags);
 394 }
 395
 396 static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
 397 {
 398         struct sk_buff *skb;
 399         int err = 0;
 400
 401         spin_lock(&data->rxlock);
 402         skb = data->evt_skb;
 403
 404         while (count) {
 405                 int len;
 406
 407                 if (!skb) {
 408                         skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC);
 409                         if (!skb) {
 410                                 err = -ENOMEM;
 411                                 break;
 412                         }
 413
 414                         bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
 415                         bt_cb(skb)->expect = HCI_EVENT_HDR_SIZE;
 416                 }
 417
 418                 len = min_t(uint, bt_cb(skb)->expect, count);
 419                 memcpy(skb_put(skb, len), buffer, len);
 420
 421                 count -= len;
 422                 buffer += len;
 423                 bt_cb(skb)->expect -= len;
 424
 425                 if (skb->len == HCI_EVENT_HDR_SIZE) {
 426                         /* Complete event header */
 427                         bt_cb(skb)->expect = hci_event_hdr(skb)->plen;
 428
 429                         if (skb_tailroom(skb) < bt_cb(skb)->expect) {
 430                                 kfree_skb(skb);
 431                                 skb = NULL;
 432
 433                                 err = -EILSEQ;
 434                                 break;
 435                         }
 436                 }
 437
 438                 if (bt_cb(skb)->expect == 0) {
 439                         /* Complete frame */
 440                         data->recv_event(data->hdev, skb);
 441                         skb = NULL;
 442                 }
 443         }
 444
 445         data->evt_skb = skb;
 446         spin_unlock(&data->rxlock);
 447
 448         return err;
 449 }
 450
 451 static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
 452 {
 453         struct sk_buff *skb;
 454         int err = 0;
 455
 456         spin_lock(&data->rxlock);
 457         skb = data->acl_skb;
 458
 459         while (count) {
 460                 int len;
 461
 462                 if (!skb) {
 463                         skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
 464                         if (!skb) {
 465                                 err = -ENOMEM;
 466                                 break;
 467                         }
 468
 469                         bt_cb(skb)->pkt_type = HCI_ACLDATA_PKT;
 470                         bt_cb(skb)->expect = HCI_ACL_HDR_SIZE;
 471                 }
 472
 473                 len = min_t(uint, bt_cb(skb)->expect, count);
 474                 memcpy(skb_put(skb, len), buffer, len);
 475
 476                 count -= len;
 477                 buffer += len;
 478                 bt_cb(skb)->expect -= len;
 479
 480                 if (skb->len == HCI_ACL_HDR_SIZE) {
 481                         __le16 dlen = hci_acl_hdr(skb)->dlen;
 482
 483                         /* Complete ACL header */
 484                         bt_cb(skb)->expect = __le16_to_cpu(dlen);
 485
 486                         if (skb_tailroom(skb) < bt_cb(skb)->expect) {
 487                                 kfree_skb(skb);
 488                                 skb = NULL;
 489
 490                                 err = -EILSEQ;
 491                                 break;
 492                         }
 493                 }
 494
 495                 if (bt_cb(skb)->expect == 0) {
 496                         /* Complete frame */
 497                         hci_recv_frame(data->hdev, skb);
 498                         skb = NULL;
 499                 }
 500         }
 501
 502         data->acl_skb = skb;
 503         spin_unlock(&data->rxlock);
 504
 505         return err;
 506 }
 507
 508 static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
 509 {
 510         struct sk_buff *skb;
 511         int err = 0;
 512
 513         spin_lock(&data->rxlock);
 514         skb = data->sco_skb;
 515
 516         while (count) {
 517                 int len;
 518
 519                 if (!skb) {
 520                         skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC);
 521                         if (!skb) {
 522                                 err = -ENOMEM;
 523                                 break;
 524                         }
 525
 526                         bt_cb(skb)->pkt_type = HCI_SCODATA_PKT;
 527                         bt_cb(skb)->expect = HCI_SCO_HDR_SIZE;
 528                 }
 529
 530                 len = min_t(uint, bt_cb(skb)->expect, count);
 531                 memcpy(skb_put(skb, len), buffer, len);
 532
 533                 count -= len;
 534                 buffer += len;
 535                 bt_cb(skb)->expect -= len;
 536
 537                 if (skb->len == HCI_SCO_HDR_SIZE) {
 538                         /* Complete SCO header */
 539                         bt_cb(skb)->expect = hci_sco_hdr(skb)->dlen;
 540
 541                         if (skb_tailroom(skb) < bt_cb(skb)->expect) {
 542                                 kfree_skb(skb);
 543                                 skb = NULL;
 544
 545                                 err = -EILSEQ;
 546                                 break;
 547                         }
 548                 }
 549
 550                 if (bt_cb(skb)->expect == 0) {
 551                         /* Complete frame */
 552                         hci_recv_frame(data->hdev, skb);
 553                         skb = NULL;
 554                 }
 555         }
 556
 557         data->sco_skb = skb;
 558         spin_unlock(&data->rxlock);
 559
 560         return err;
 561 }
 562
 563 static void btusb_intr_complete(struct urb *urb)
 564 {
 565         struct hci_dev *hdev = urb->context;
 566         struct btusb_data *data = hci_get_drvdata(hdev);
 567         int err;
 568
 569         BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
 570                urb->actual_length);
 571
 572         if (!test_bit(HCI_RUNNING, &hdev->flags))
 573                 return;
 574
 575         if (urb->status == 0) {
 576                 hdev->stat.byte_rx += urb->actual_length;
 577
 578                 if (btusb_recv_intr(data, urb->transfer_buffer,
 579                                     urb->actual_length) < 0) {
 580                         BT_ERR("%s corrupted event packet", hdev->name);
 581                         hdev->stat.err_rx++;
 582                 }
 583         } else if (urb->status == -ENOENT) {
 584                 /* Avoid suspend failed when usb_kill_urb */
 585                 return;
 586         }
 587
 588         if (!test_bit(BTUSB_INTR_RUNNING, &data->flags))
 589                 return;
 590
 591         usb_mark_last_busy(data->udev);
 592         usb_anchor_urb(urb, &data->intr_anchor);
 593
 594         err = usb_submit_urb(urb, GFP_ATOMIC);
 595         if (err < 0) {
 596                 /* -EPERM: urb is being killed;
 597                  * -ENODEV: device got disconnected */
 598                 if (err != -EPERM && err != -ENODEV)
 599                         BT_ERR("%s urb %p failed to resubmit (%d)",
 600                                hdev->name, urb, -err);
 601                 usb_unanchor_urb(urb);
 602         }
 603 }
 604
 605 static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
 606 {
 607         struct btusb_data *data = hci_get_drvdata(hdev);
 608         struct urb *urb;
 609         unsigned char *buf;
 610         unsigned int pipe;
 611         int err, size;
 612
 613         BT_DBG("%s", hdev->name);
 614
 615         if (!data->intr_ep)
 616                 return -ENODEV;
 617
 618         urb = usb_alloc_urb(0, mem_flags);
 619         if (!urb)
 620                 return -ENOMEM;
 621
 622         size = le16_to_cpu(data->intr_ep->wMaxPacketSize);
 623
 624         buf = kmalloc(size, mem_flags);
 625         if (!buf) {
 626                 usb_free_urb(urb);
 627                 return -ENOMEM;
 628         }
 629
 630         pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress);
 631
 632         usb_fill_int_urb(urb, data->udev, pipe, buf, size,
 633                          btusb_intr_complete, hdev, data->intr_ep->bInterval);
 634
 635         urb->transfer_flags |= URB_FREE_BUFFER;
 636
 637         usb_anchor_urb(urb, &data->intr_anchor);
 638
 639         err = usb_submit_urb(urb, mem_flags);
 640         if (err < 0) {
 641                 if (err != -EPERM && err != -ENODEV)
 642                         BT_ERR("%s urb %p submission failed (%d)",
 643                                hdev->name, urb, -err);
 644                 usb_unanchor_urb(urb);
 645         }
 646
 647         usb_free_urb(urb);
 648
 649         return err;
 650 }
 651
 652 static void btusb_bulk_complete(struct urb *urb)
 653 {
 654         struct hci_dev *hdev = urb->context;
 655         struct btusb_data *data = hci_get_drvdata(hdev);
 656         int err;
 657
 658         BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
 659                urb->actual_length);
 660
 661         if (!test_bit(HCI_RUNNING, &hdev->flags))
 662                 return;
 663
 664         if (urb->status == 0) {
 665                 hdev->stat.byte_rx += urb->actual_length;
 666
 667                 if (data->recv_bulk(data, urb->transfer_buffer,
 668                                     urb->actual_length) < 0) {
 669                         BT_ERR("%s corrupted ACL packet", hdev->name);
 670                         hdev->stat.err_rx++;
 671                 }
 672         } else if (urb->status == -ENOENT) {
 673                 /* Avoid suspend failed when usb_kill_urb */
 674                 return;
 675         }
 676
 677         if (!test_bit(BTUSB_BULK_RUNNING, &data->flags))
 678                 return;
 679
 680         usb_anchor_urb(urb, &data->bulk_anchor);
 681         usb_mark_last_busy(data->udev);
 682
 683         err = usb_submit_urb(urb, GFP_ATOMIC);
 684         if (err < 0) {
 685                 /* -EPERM: urb is being killed;
 686                  * -ENODEV: device got disconnected */
 687                 if (err != -EPERM && err != -ENODEV)
 688                         BT_ERR("%s urb %p failed to resubmit (%d)",
 689                                hdev->name, urb, -err);
 690                 usb_unanchor_urb(urb);
 691         }
 692 }
 693
 694 static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
 695 {
 696         struct btusb_data *data = hci_get_drvdata(hdev);
 697         struct urb *urb;
 698         unsigned char *buf;
 699         unsigned int pipe;
 700         int err, size = HCI_MAX_FRAME_SIZE;
 701
 702         BT_DBG("%s", hdev->name);
 703
 704         if (!data->bulk_rx_ep)
 705                 return -ENODEV;
 706
 707         urb = usb_alloc_urb(0, mem_flags);
 708         if (!urb)
 709                 return -ENOMEM;
 710
 711         buf = kmalloc(size, mem_flags);
 712         if (!buf) {
 713                 usb_free_urb(urb);
 714                 return -ENOMEM;
 715         }
 716
 717         pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress);
 718
 719         usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
 720                           btusb_bulk_complete, hdev);
 721
 722         urb->transfer_flags |= URB_FREE_BUFFER;
 723
 724         usb_mark_last_busy(data->udev);
 725         usb_anchor_urb(urb, &data->bulk_anchor);
 726
 727         err = usb_submit_urb(urb, mem_flags);
 728         if (err < 0) {
 729                 if (err != -EPERM && err != -ENODEV)
 730                         BT_ERR("%s urb %p submission failed (%d)",
 731                                hdev->name, urb, -err);
 732                 usb_unanchor_urb(urb);
 733         }
 734
 735         usb_free_urb(urb);
 736
 737         return err;
 738 }
 739
 740 static void btusb_isoc_complete(struct urb *urb)
 741 {
 742         struct hci_dev *hdev = urb->context;
 743         struct btusb_data *data = hci_get_drvdata(hdev);
 744         int i, err;
 745
 746         BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
 747                urb->actual_length);
 748
 749         if (!test_bit(HCI_RUNNING, &hdev->flags))
 750                 return;
 751
 752         if (urb->status == 0) {
 753                 for (i = 0; i < urb->number_of_packets; i++) {
 754                         unsigned int offset = urb->iso_frame_desc[i].offset;
 755                         unsigned int length = urb->iso_frame_desc[i].actual_length;
 756
 757                         if (urb->iso_frame_desc[i].status)
 758                                 continue;
 759
 760                         hdev->stat.byte_rx += length;
 761
 762                         if (btusb_recv_isoc(data, urb->transfer_buffer + offset,
 763                                             length) < 0) {
 764                                 BT_ERR("%s corrupted SCO packet", hdev->name);
 765                                 hdev->stat.err_rx++;
 766                         }
 767                 }
 768         } else if (urb->status == -ENOENT) {
 769                 /* Avoid suspend failed when usb_kill_urb */
 770                 return;
 771         }
 772
 773         if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
 774                 return;
 775
 776         usb_anchor_urb(urb, &data->isoc_anchor);
 777
 778         err = usb_submit_urb(urb, GFP_ATOMIC);
 779         if (err < 0) {
 780                 /* -EPERM: urb is being killed;
 781                  * -ENODEV: device got disconnected */
 782                 if (err != -EPERM && err != -ENODEV)
 783                         BT_ERR("%s urb %p failed to resubmit (%d)",
 784                                hdev->name, urb, -err);
 785                 usb_unanchor_urb(urb);
 786         }
 787 }
 788
 789 static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
 790 {
 791         int i, offset = 0;
 792
 793         BT_DBG("len %d mtu %d", len, mtu);
 794
 795         for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
 796                                         i++, offset += mtu, len -= mtu) {
 797                 urb->iso_frame_desc[i].offset = offset;
 798                 urb->iso_frame_desc[i].length = mtu;
 799         }
 800
 801         if (len && i < BTUSB_MAX_ISOC_FRAMES) {
 802                 urb->iso_frame_desc[i].offset = offset;
 803                 urb->iso_frame_desc[i].length = len;
 804                 i++;
 805         }
 806
 807         urb->number_of_packets = i;
 808 }
 809
 810 static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags)
 811 {
 812         struct btusb_data *data = hci_get_drvdata(hdev);
 813         struct urb *urb;
 814         unsigned char *buf;
 815         unsigned int pipe;
 816         int err, size;
 817
 818         BT_DBG("%s", hdev->name);
 819
 820         if (!data->isoc_rx_ep)
 821                 return -ENODEV;
 822
 823         urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags);
 824         if (!urb)
 825                 return -ENOMEM;
 826
 827         size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
 828                                                 BTUSB_MAX_ISOC_FRAMES;
 829
 830         buf = kmalloc(size, mem_flags);
 831         if (!buf) {
 832                 usb_free_urb(urb);
 833                 return -ENOMEM;
 834         }
 835
 836         pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
 837
 838         usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete,
 839                          hdev, data->isoc_rx_ep->bInterval);
 840
 841         urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP;
 842
 843         __fill_isoc_descriptor(urb, size,
 844                                le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
 845
 846         usb_anchor_urb(urb, &data->isoc_anchor);
 847
 848         err = usb_submit_urb(urb, mem_flags);
 849         if (err < 0) {
 850                 if (err != -EPERM && err != -ENODEV)
 851                         BT_ERR("%s urb %p submission failed (%d)",
 852                                hdev->name, urb, -err);
 853                 usb_unanchor_urb(urb);
 854         }
 855
 856         usb_free_urb(urb);
 857
 858         return err;
 859 }
 860
 861 static void btusb_tx_complete(struct urb *urb)
 862 {
 863         struct sk_buff *skb = urb->context;
 864         struct hci_dev *hdev = (struct hci_dev *)skb->dev;
 865         struct btusb_data *data = hci_get_drvdata(hdev);
 866
 867         BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
 868                urb->actual_length);
 869
 870         if (!test_bit(HCI_RUNNING, &hdev->flags))
 871                 goto done;
 872
 873         if (!urb->status)
 874                 hdev->stat.byte_tx += urb->transfer_buffer_length;
 875         else
 876                 hdev->stat.err_tx++;
 877
 878 done:
 879         spin_lock(&data->txlock);
 880         data->tx_in_flight--;
 881         spin_unlock(&data->txlock);
 882
 883         kfree(urb->setup_packet);
 884
 885         kfree_skb(skb);
 886 }
 887
 888 static void btusb_isoc_tx_complete(struct urb *urb)
 889 {
 890         struct sk_buff *skb = urb->context;
 891         struct hci_dev *hdev = (struct hci_dev *)skb->dev;
 892
 893         BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
 894                urb->actual_length);
 895
 896         if (!test_bit(HCI_RUNNING, &hdev->flags))
 897                 goto done;
 898
 899         if (!urb->status)
 900                 hdev->stat.byte_tx += urb->transfer_buffer_length;
 901         else
 902                 hdev->stat.err_tx++;
 903
 904 done:
 905         kfree(urb->setup_packet);
 906
 907         kfree_skb(skb);
 908 }
 909
 910 static int btusb_open(struct hci_dev *hdev)
 911 {
 912         struct btusb_data *data = hci_get_drvdata(hdev);
 913         int err;
 914
 915         BT_DBG("%s", hdev->name);
 916
 917         /* Patching USB firmware files prior to starting any URBs of HCI path
 918          * It is more safe to use USB bulk channel for downloading USB patch
 919          */
 920         if (data->setup_on_usb) {
 921                 err = data->setup_on_usb(hdev);
 922                 if (err < 0)
 923                         return err;
 924         }
 925
 926         err = usb_autopm_get_interface(data->intf);
 927         if (err < 0)
 928                 return err;
 929
 930         data->intf->needs_remote_wakeup = 1;
 931
 932         if (test_and_set_bit(HCI_RUNNING, &hdev->flags))
 933                 goto done;
 934
 935         if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
 936                 goto done;
 937
 938         err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
 939         if (err < 0)
 940                 goto failed;
 941
 942         err = btusb_submit_bulk_urb(hdev, GFP_KERNEL);
 943         if (err < 0) {
 944                 usb_kill_anchored_urbs(&data->intr_anchor);
 945                 goto failed;
 946         }
 947
 948         set_bit(BTUSB_BULK_RUNNING, &data->flags);
 949         btusb_submit_bulk_urb(hdev, GFP_KERNEL);
 950
 951 done:
 952         usb_autopm_put_interface(data->intf);
 953         return 0;
 954
 955 failed:
 956         clear_bit(BTUSB_INTR_RUNNING, &data->flags);
 957         clear_bit(HCI_RUNNING, &hdev->flags);
 958         usb_autopm_put_interface(data->intf);
 959         return err;
 960 }
 961
 962 static void btusb_stop_traffic(struct btusb_data *data)
 963 {
 964         usb_kill_anchored_urbs(&data->intr_anchor);
 965         usb_kill_anchored_urbs(&data->bulk_anchor);
 966         usb_kill_anchored_urbs(&data->isoc_anchor);
 967 }
 968
 969 static int btusb_close(struct hci_dev *hdev)
 970 {
 971         struct btusb_data *data = hci_get_drvdata(hdev);
 972         int err;
 973
 974         BT_DBG("%s", hdev->name);
 975
 976         if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
 977                 return 0;
 978
 979         cancel_work_sync(&data->work);
 980         cancel_work_sync(&data->waker);
 981
 982         clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
 983         clear_bit(BTUSB_BULK_RUNNING, &data->flags);
 984         clear_bit(BTUSB_INTR_RUNNING, &data->flags);
 985
 986         btusb_stop_traffic(data);
 987         btusb_free_frags(data);
 988
 989         err = usb_autopm_get_interface(data->intf);
 990         if (err < 0)
 991                 goto failed;
 992
 993         data->intf->needs_remote_wakeup = 0;
 994         usb_autopm_put_interface(data->intf);
 995
 996 failed:
 997         usb_scuttle_anchored_urbs(&data->deferred);
 998         return 0;
 999 }
1000
1001 static int btusb_flush(struct hci_dev *hdev)
1002 {
1003         struct btusb_data *data = hci_get_drvdata(hdev);
1004
1005         BT_DBG("%s", hdev->name);
1006
1007         usb_kill_anchored_urbs(&data->tx_anchor);
1008         btusb_free_frags(data);
1009
1010         return 0;
1011 }
1012
1013 static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb)
1014 {
1015         struct btusb_data *data = hci_get_drvdata(hdev);
1016         struct usb_ctrlrequest *dr;
1017         struct urb *urb;
1018         unsigned int pipe;
1019
1020         urb = usb_alloc_urb(0, GFP_KERNEL);
1021         if (!urb)
1022                 return ERR_PTR(-ENOMEM);
1023
1024         dr = kmalloc(sizeof(*dr), GFP_KERNEL);
1025         if (!dr) {
1026                 usb_free_urb(urb);
1027                 return ERR_PTR(-ENOMEM);
1028         }
1029
1030         dr->bRequestType = data->cmdreq_type;
1031         dr->bRequest     = data->cmdreq;
1032         dr->wIndex       = 0;
1033         dr->wValue       = 0;
1034         dr->wLength      = __cpu_to_le16(skb->len);
1035
1036         pipe = usb_sndctrlpipe(data->udev, 0x00);
1037
1038         usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
1039                              skb->data, skb->len, btusb_tx_complete, skb);
1040
1041         skb->dev = (void *)hdev;
1042
1043         return urb;
1044 }
1045
1046 static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb)
1047 {
1048         struct btusb_data *data = hci_get_drvdata(hdev);
1049         struct urb *urb;
1050         unsigned int pipe;
1051
1052         if (!data->bulk_tx_ep)
1053                 return ERR_PTR(-ENODEV);
1054
1055         urb = usb_alloc_urb(0, GFP_KERNEL);
1056         if (!urb)
1057                 return ERR_PTR(-ENOMEM);
1058
1059         pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);
1060
1061         usb_fill_bulk_urb(urb, data->udev, pipe,
1062                           skb->data, skb->len, btusb_tx_complete, skb);
1063
1064         skb->dev = (void *)hdev;
1065
1066         return urb;
1067 }
1068
1069 static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb)
1070 {
1071         struct btusb_data *data = hci_get_drvdata(hdev);
1072         struct urb *urb;
1073         unsigned int pipe;
1074
1075         if (!data->isoc_tx_ep)
1076                 return ERR_PTR(-ENODEV);
1077
1078         urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
1079         if (!urb)
1080                 return ERR_PTR(-ENOMEM);
1081
1082         pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress);
1083
1084         usb_fill_int_urb(urb, data->udev, pipe,
1085                          skb->data, skb->len, btusb_isoc_tx_complete,
1086                          skb, data->isoc_tx_ep->bInterval);
1087
1088         urb->transfer_flags  = URB_ISO_ASAP;
1089
1090         __fill_isoc_descriptor(urb, skb->len,
1091                                le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
1092
1093         skb->dev = (void *)hdev;
1094
1095         return urb;
1096 }
1097
1098 static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb)
1099 {
1100         struct btusb_data *data = hci_get_drvdata(hdev);
1101         int err;
1102
1103         usb_anchor_urb(urb, &data->tx_anchor);
1104
1105         err = usb_submit_urb(urb, GFP_KERNEL);
1106         if (err < 0) {
1107                 if (err != -EPERM && err != -ENODEV)
1108                         BT_ERR("%s urb %p submission failed (%d)",
1109                                hdev->name, urb, -err);
1110                 kfree(urb->setup_packet);
1111                 usb_unanchor_urb(urb);
1112         } else {
1113                 usb_mark_last_busy(data->udev);
1114         }
1115
1116         usb_free_urb(urb);
1117         return err;
1118 }
1119
1120 static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb)
1121 {
1122         struct btusb_data *data = hci_get_drvdata(hdev);
1123         unsigned long flags;
1124         bool suspending;
1125
1126         spin_lock_irqsave(&data->txlock, flags);
1127         suspending = test_bit(BTUSB_SUSPENDING, &data->flags);
1128         if (!suspending)
1129                 data->tx_in_flight++;
1130         spin_unlock_irqrestore(&data->txlock, flags);
1131
1132         if (!suspending)
1133                 return submit_tx_urb(hdev, urb);
1134
1135         usb_anchor_urb(urb, &data->deferred);
1136         schedule_work(&data->waker);
1137
1138         usb_free_urb(urb);
1139         return 0;
1140 }
1141
1142 static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
1143 {
1144         struct urb *urb;
1145
1146         BT_DBG("%s", hdev->name);
1147
1148         if (!test_bit(HCI_RUNNING, &hdev->flags))
1149                 return -EBUSY;
1150
1151         switch (bt_cb(skb)->pkt_type) {
1152         case HCI_COMMAND_PKT:
1153                 urb = alloc_ctrl_urb(hdev, skb);
1154                 if (IS_ERR(urb))
1155                         return PTR_ERR(urb);
1156
1157                 hdev->stat.cmd_tx++;
1158                 return submit_or_queue_tx_urb(hdev, urb);
1159
1160         case HCI_ACLDATA_PKT:
1161                 urb = alloc_bulk_urb(hdev, skb);
1162                 if (IS_ERR(urb))
1163                         return PTR_ERR(urb);
1164
1165                 hdev->stat.acl_tx++;
1166                 return submit_or_queue_tx_urb(hdev, urb);
1167
1168         case HCI_SCODATA_PKT:
1169                 if (hci_conn_num(hdev, SCO_LINK) < 1)
1170                         return -ENODEV;
1171
1172                 urb = alloc_isoc_urb(hdev, skb);
1173                 if (IS_ERR(urb))
1174                         return PTR_ERR(urb);
1175
1176                 hdev->stat.sco_tx++;
1177                 return submit_tx_urb(hdev, urb);
1178         }
1179
1180         return -EILSEQ;
1181 }
1182
1183 static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
1184 {
1185         struct btusb_data *data = hci_get_drvdata(hdev);
1186
1187         BT_DBG("%s evt %d", hdev->name, evt);
1188
1189         if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) {
1190                 data->sco_num = hci_conn_num(hdev, SCO_LINK);
1191                 schedule_work(&data->work);
1192         }
1193 }
1194
1195 static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
1196 {
1197         struct btusb_data *data = hci_get_drvdata(hdev);
1198         struct usb_interface *intf = data->isoc;
1199         struct usb_endpoint_descriptor *ep_desc;
1200         int i, err;
1201
1202         if (!data->isoc)
1203                 return -ENODEV;
1204
1205         err = usb_set_interface(data->udev, 1, altsetting);
1206         if (err < 0) {
1207                 BT_ERR("%s setting interface failed (%d)", hdev->name, -err);
1208                 return err;
1209         }
1210
1211         data->isoc_altsetting = altsetting;
1212
1213         data->isoc_tx_ep = NULL;
1214         data->isoc_rx_ep = NULL;
1215
1216         for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
1217                 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
1218
1219                 if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
1220                         data->isoc_tx_ep = ep_desc;
1221                         continue;
1222                 }
1223
1224                 if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
1225                         data->isoc_rx_ep = ep_desc;
1226                         continue;
1227                 }
1228         }
1229
1230         if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
1231                 BT_ERR("%s invalid SCO descriptors", hdev->name);
1232                 return -ENODEV;
1233         }
1234
1235         return 0;
1236 }
1237
1238 static void btusb_work(struct work_struct *work)
1239 {
1240         struct btusb_data *data = container_of(work, struct btusb_data, work);
1241         struct hci_dev *hdev = data->hdev;
1242         int new_alts;
1243         int err;
1244
1245         if (data->sco_num > 0) {
1246                 if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
1247                         err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
1248                         if (err < 0) {
1249                                 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1250                                 usb_kill_anchored_urbs(&data->isoc_anchor);
1251                                 return;
1252                         }
1253
1254                         set_bit(BTUSB_DID_ISO_RESUME, &data->flags);
1255                 }
1256
1257                 if (hdev->voice_setting & 0x0020) {
1258                         static const int alts[3] = { 2, 4, 5 };
1259
1260                         new_alts = alts[data->sco_num - 1];
1261                 } else {
1262                         new_alts = data->sco_num;
1263                 }
1264
1265                 if (data->isoc_altsetting != new_alts) {
1266                         clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1267                         usb_kill_anchored_urbs(&data->isoc_anchor);
1268
1269                         if (__set_isoc_interface(hdev, new_alts) < 0)
1270                                 return;
1271                 }
1272
1273                 if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
1274                         if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
1275                                 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1276                         else
1277                                 btusb_submit_isoc_urb(hdev, GFP_KERNEL);
1278                 }
1279         } else {
1280                 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1281                 usb_kill_anchored_urbs(&data->isoc_anchor);
1282
1283                 __set_isoc_interface(hdev, 0);
1284                 if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
1285                         usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
1286         }
1287 }
1288
1289 static void btusb_waker(struct work_struct *work)
1290 {
1291         struct btusb_data *data = container_of(work, struct btusb_data, waker);
1292         int err;
1293
1294         err = usb_autopm_get_interface(data->intf);
1295         if (err < 0)
1296                 return;
1297
1298         usb_autopm_put_interface(data->intf);
1299 }
1300
1301 static struct sk_buff *btusb_read_local_version(struct hci_dev *hdev)
1302 {
1303         struct sk_buff *skb;
1304
1305         skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
1306                              HCI_INIT_TIMEOUT);
1307         if (IS_ERR(skb)) {
1308                 BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
1309                        hdev->name, PTR_ERR(skb));
1310                 return skb;
1311         }
1312
1313         if (skb->len != sizeof(struct hci_rp_read_local_version)) {
1314                 BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
1315                        hdev->name);
1316                 kfree_skb(skb);
1317                 return ERR_PTR(-EIO);
1318         }
1319
1320         return skb;
1321 }
1322
1323 static int btusb_setup_bcm92035(struct hci_dev *hdev)
1324 {
1325         struct sk_buff *skb;
1326         u8 val = 0x00;
1327
1328         BT_DBG("%s", hdev->name);
1329
1330         skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
1331         if (IS_ERR(skb))
1332                 BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb));
1333         else
1334                 kfree_skb(skb);
1335
1336         return 0;
1337 }
1338
1339 static int btusb_setup_csr(struct hci_dev *hdev)
1340 {
1341         struct hci_rp_read_local_version *rp;
1342         struct sk_buff *skb;
1343         int ret;
1344
1345         BT_DBG("%s", hdev->name);
1346
1347         skb = btusb_read_local_version(hdev);
1348         if (IS_ERR(skb))
1349                 return -PTR_ERR(skb);
1350
1351         rp = (struct hci_rp_read_local_version *)skb->data;
1352
1353         if (!rp->status) {
1354                 if (le16_to_cpu(rp->manufacturer) != 10) {
1355                         /* Clear the reset quirk since this is not an actual
1356                          * early Bluetooth 1.1 device from CSR.
1357                          */
1358                         clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
1359
1360                         /* These fake CSR controllers have all a broken
1361                          * stored link key handling and so just disable it.
1362                          */
1363                         set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY,
1364                                 &hdev->quirks);
1365                 }
1366         }
1367
1368         ret = -bt_to_errno(rp->status);
1369
1370         kfree_skb(skb);
1371
1372         return ret;
1373 }
1374
1375 #define RTL_FRAG_LEN 252
1376
1377 struct rtl_download_cmd {
1378         __u8 index;
1379         __u8 data[RTL_FRAG_LEN];
1380 } __packed;
1381
1382 struct rtl_download_response {
1383         __u8 status;
1384         __u8 index;
1385 } __packed;
1386
1387 struct rtl_rom_version_evt {
1388         __u8 status;
1389         __u8 version;
1390 } __packed;
1391
1392 struct rtl_epatch_header {
1393         __u8 signature[8];
1394         __le32 fw_version;
1395         __le16 num_patches;
1396 } __packed;
1397
1398 #define RTL_EPATCH_SIGNATURE    "Realtech"
1399 #define RTL_ROM_LMP_3499        0x3499
1400 #define RTL_ROM_LMP_8723A       0x1200
1401 #define RTL_ROM_LMP_8723B       0x8723
1402 #define RTL_ROM_LMP_8821A       0x8821
1403 #define RTL_ROM_LMP_8761A       0x8761
1404
1405 static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version)
1406 {
1407         struct rtl_rom_version_evt *rom_version;
1408         struct sk_buff *skb;
1409         int ret;
1410
1411         /* Read RTL ROM version command */
1412         skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT);
1413         if (IS_ERR(skb)) {
1414                 BT_ERR("%s: Read ROM version failed (%ld)",
1415                        hdev->name, PTR_ERR(skb));
1416                 return PTR_ERR(skb);
1417         }
1418
1419         if (skb->len != sizeof(*rom_version)) {
1420                 BT_ERR("%s: RTL version event length mismatch", hdev->name);
1421                 kfree_skb(skb);
1422                 return -EIO;
1423         }
1424
1425         rom_version = (struct rtl_rom_version_evt *)skb->data;
1426         BT_INFO("%s: rom_version status=%x version=%x",
1427                 hdev->name, rom_version->status, rom_version->version);
1428
1429         ret = rom_version->status;
1430         if (ret == 0)
1431                 *version = rom_version->version;
1432
1433         kfree_skb(skb);
1434         return ret;
1435 }
1436
1437 static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
1438                                    const struct firmware *fw,
1439                                    unsigned char **_buf)
1440 {
1441         const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 };
1442         struct rtl_epatch_header *epatch_info;
1443         unsigned char *buf;
1444         int i, ret, len;
1445         size_t min_size;
1446         u8 opcode, length, data, rom_version = 0;
1447         int project_id = -1;
1448         const unsigned char *fwptr, *chip_id_base;
1449         const unsigned char *patch_length_base, *patch_offset_base;
1450         u32 patch_offset = 0;
1451         u16 patch_length, num_patches;
1452         const u16 project_id_to_lmp_subver[] = {
1453                 RTL_ROM_LMP_8723A,
1454                 RTL_ROM_LMP_8723B,
1455                 RTL_ROM_LMP_8821A,
1456                 RTL_ROM_LMP_8761A
1457         };
1458
1459         ret = rtl_read_rom_version(hdev, &rom_version);
1460         if (ret)
1461                 return -bt_to_errno(ret);
1462
1463         min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3;
1464         if (fw->size < min_size)
1465                 return -EINVAL;
1466
1467         fwptr = fw->data + fw->size - sizeof(extension_sig);
1468         if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) {
1469                 BT_ERR("%s: extension section signature mismatch", hdev->name);
1470                 return -EINVAL;
1471         }
1472
1473         /* Loop from the end of the firmware parsing instructions, until
1474          * we find an instruction that identifies the "project ID" for the
1475          * hardware supported by this firwmare file.
1476          * Once we have that, we double-check that that project_id is suitable
1477          * for the hardware we are working with.
1478          */
1479         while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) {
1480                 opcode = *--fwptr;
1481                 length = *--fwptr;
1482                 data = *--fwptr;
1483
1484                 BT_DBG("check op=%x len=%x data=%x", opcode, length, data);
1485
1486                 if (opcode == 0xff) /* EOF */
1487                         break;
1488
1489                 if (length == 0) {
1490                         BT_ERR("%s: found instruction with length 0",
1491                                hdev->name);
1492                         return -EINVAL;
1493                 }
1494
1495                 if (opcode == 0 && length == 1) {
1496                         project_id = data;
1497                         break;
1498                 }
1499
1500                 fwptr -= length;
1501         }
1502
1503         if (project_id < 0) {
1504                 BT_ERR("%s: failed to find version instruction", hdev->name);
1505                 return -EINVAL;
1506         }
1507
1508         if (project_id >= ARRAY_SIZE(project_id_to_lmp_subver)) {
1509                 BT_ERR("%s: unknown project id %d", hdev->name, project_id);
1510                 return -EINVAL;
1511         }
1512
1513         if (lmp_subver != project_id_to_lmp_subver[project_id]) {
1514                 BT_ERR("%s: firmware is for %x but this is a %x", hdev->name,
1515                        project_id_to_lmp_subver[project_id], lmp_subver);
1516                 return -EINVAL;
1517         }
1518
1519         epatch_info = (struct rtl_epatch_header *)fw->data;
1520         if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) {
1521                 BT_ERR("%s: bad EPATCH signature", hdev->name);
1522                 return -EINVAL;
1523         }
1524
1525         num_patches = le16_to_cpu(epatch_info->num_patches);
1526         BT_DBG("fw_version=%x, num_patches=%d",
1527                le32_to_cpu(epatch_info->fw_version), num_patches);
1528
1529         /* After the rtl_epatch_header there is a funky patch metadata section.
1530          * Assuming 2 patches, the layout is:
1531          * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2
1532          *
1533          * Find the right patch for this chip.
1534          */
1535         min_size += 8 * num_patches;
1536         if (fw->size < min_size)
1537                 return -EINVAL;
1538
1539         chip_id_base = fw->data + sizeof(struct rtl_epatch_header);
1540         patch_length_base = chip_id_base + (sizeof(u16) * num_patches);
1541         patch_offset_base = patch_length_base + (sizeof(u16) * num_patches);
1542         for (i = 0; i < num_patches; i++) {
1543                 u16 chip_id = get_unaligned_le16(chip_id_base +
1544                                                  (i * sizeof(u16)));
1545                 if (chip_id == rom_version + 1) {
1546                         patch_length = get_unaligned_le16(patch_length_base +
1547                                                           (i * sizeof(u16)));
1548                         patch_offset = get_unaligned_le32(patch_offset_base +
1549                                                           (i * sizeof(u32)));
1550                         break;
1551                 }
1552         }
1553
1554         if (!patch_offset) {
1555                 BT_ERR("%s: didn't find patch for chip id %d",
1556                        hdev->name, rom_version);
1557                 return -EINVAL;
1558         }
1559
1560         BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i);
1561         min_size = patch_offset + patch_length;
1562         if (fw->size < min_size)
1563                 return -EINVAL;
1564
1565         /* Copy the firmware into a new buffer and write the version at
1566          * the end.
1567          */
1568         len = patch_length;
1569         buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL);
1570         if (!buf)
1571                 return -ENOMEM;
1572
1573         memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4);
1574
1575         *_buf = buf;
1576         return len;
1577 }
1578
1579 static int rtl_download_firmware(struct hci_dev *hdev,
1580                                  const unsigned char *data, int fw_len)
1581 {
1582         struct rtl_download_cmd *dl_cmd;
1583         int frag_num = fw_len / RTL_FRAG_LEN + 1;
1584         int frag_len = RTL_FRAG_LEN;
1585         int ret = 0;
1586         int i;
1587
1588         dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL);
1589         if (!dl_cmd)
1590                 return -ENOMEM;
1591
1592         for (i = 0; i < frag_num; i++) {
1593                 struct rtl_download_response *dl_resp;
1594                 struct sk_buff *skb;
1595
1596                 BT_DBG("download fw (%d/%d)", i, frag_num);
1597
1598                 dl_cmd->index = i;
1599                 if (i == (frag_num - 1)) {
1600                         dl_cmd->index |= 0x80; /* data end */
1601                         frag_len = fw_len % RTL_FRAG_LEN;
1602                 }
1603                 memcpy(dl_cmd->data, data, frag_len);
1604
1605                 /* Send download command */
1606                 skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd,
1607                                      HCI_INIT_TIMEOUT);
1608                 if (IS_ERR(skb)) {
1609                         BT_ERR("%s: download fw command failed (%ld)",
1610                                hdev->name, PTR_ERR(skb));
1611                         ret = -PTR_ERR(skb);
1612                         goto out;
1613                 }
1614
1615                 if (skb->len != sizeof(*dl_resp)) {
1616                         BT_ERR("%s: download fw event length mismatch",
1617                                hdev->name);
1618                         kfree_skb(skb);
1619                         ret = -EIO;
1620                         goto out;
1621                 }
1622
1623                 dl_resp = (struct rtl_download_response *)skb->data;
1624                 if (dl_resp->status != 0) {
1625                         kfree_skb(skb);
1626                         ret = bt_to_errno(dl_resp->status);
1627                         goto out;
1628                 }
1629
1630                 kfree_skb(skb);
1631                 data += RTL_FRAG_LEN;
1632         }
1633
1634 out:
1635         kfree(dl_cmd);
1636         return ret;
1637 }
1638
1639 static int btusb_setup_rtl8723a(struct hci_dev *hdev)
1640 {
1641         struct btusb_data *data = dev_get_drvdata(&hdev->dev);
1642         struct usb_device *udev = interface_to_usbdev(data->intf);
1643         const struct firmware *fw;
1644         int ret;
1645
1646         BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev->name);
1647         ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &udev->dev);
1648         if (ret < 0) {
1649                 BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name);
1650                 return ret;
1651         }
1652
1653         if (fw->size < 8) {
1654                 ret = -EINVAL;
1655                 goto out;
1656         }
1657
1658         /* Check that the firmware doesn't have the epatch signature
1659          * (which is only for RTL8723B and newer).
1660          */
1661         if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) {
1662                 BT_ERR("%s: unexpected EPATCH signature!", hdev->name);
1663                 ret = -EINVAL;
1664                 goto out;
1665         }
1666
1667         ret = rtl_download_firmware(hdev, fw->data, fw->size);
1668
1669 out:
1670         release_firmware(fw);
1671         return ret;
1672 }
1673
1674 static int btusb_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver,
1675                                 const char *fw_name)
1676 {
1677         struct btusb_data *data = dev_get_drvdata(&hdev->dev);
1678         struct usb_device *udev = interface_to_usbdev(data->intf);
1679         unsigned char *fw_data = NULL;
1680         const struct firmware *fw;
1681         int ret;
1682
1683         BT_INFO("%s: rtl: loading %s", hdev->name, fw_name);
1684         ret = request_firmware(&fw, fw_name, &udev->dev);
1685         if (ret < 0) {
1686                 BT_ERR("%s: Failed to load %s", hdev->name, fw_name);
1687                 return ret;
1688         }
1689
1690         ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data);
1691         if (ret < 0)
1692                 goto out;
1693
1694         ret = rtl_download_firmware(hdev, fw_data, ret);
1695         kfree(fw_data);
1696         if (ret < 0)
1697                 goto out;
1698
1699 out:
1700         release_firmware(fw);
1701         return ret;
1702 }
1703
1704 static int btusb_setup_realtek(struct hci_dev *hdev)
1705 {
1706         struct sk_buff *skb;
1707         struct hci_rp_read_local_version *resp;
1708         u16 lmp_subver;
1709
1710         skb = btusb_read_local_version(hdev);
1711         if (IS_ERR(skb))
1712                 return -PTR_ERR(skb);
1713
1714         resp = (struct hci_rp_read_local_version *)skb->data;
1715         BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
1716                 "lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev,
1717                 resp->lmp_ver, resp->lmp_subver);
1718
1719         lmp_subver = le16_to_cpu(resp->lmp_subver);
1720         kfree_skb(skb);
1721
1722         /* Match a set of subver values that correspond to stock firmware,
1723          * which is not compatible with standard btusb.
1724          * If matched, upload an alternative firmware that does conform to
1725          * standard btusb. Once that firmware is uploaded, the subver changes
1726          * to a different value.
1727          */
1728         switch (lmp_subver) {
1729         case RTL_ROM_LMP_8723A:
1730         case RTL_ROM_LMP_3499:
1731                 return btusb_setup_rtl8723a(hdev);
1732         case RTL_ROM_LMP_8723B:
1733                 return btusb_setup_rtl8723b(hdev, lmp_subver,
1734                                             "rtl_bt/rtl8723b_fw.bin");
1735         case RTL_ROM_LMP_8821A:
1736                 return btusb_setup_rtl8723b(hdev, lmp_subver,
1737                                             "rtl_bt/rtl8821a_fw.bin");
1738         case RTL_ROM_LMP_8761A:
1739                 return btusb_setup_rtl8723b(hdev, lmp_subver,
1740                                             "rtl_bt/rtl8761a_fw.bin");
1741         default:
1742                 BT_INFO("rtl: assuming no firmware upload needed.");
1743                 return 0;
1744         }
1745 }
1746
1747 static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
1748                                                        struct intel_version *ver)
1749 {
1750         const struct firmware *fw;
1751         char fwname[64];
1752         int ret;
1753
1754         snprintf(fwname, sizeof(fwname),
1755                  "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
1756                  ver->hw_platform, ver->hw_variant, ver->hw_revision,
1757                  ver->fw_variant,  ver->fw_revision, ver->fw_build_num,
1758                  ver->fw_build_ww, ver->fw_build_yy);
1759
1760         ret = request_firmware(&fw, fwname, &hdev->dev);
1761         if (ret < 0) {
1762                 if (ret == -EINVAL) {
1763                         BT_ERR("%s Intel firmware file request failed (%d)",
1764                                hdev->name, ret);
1765                         return NULL;
1766                 }
1767
1768                 BT_ERR("%s failed to open Intel firmware file: %s(%d)",
1769                        hdev->name, fwname, ret);
1770
1771                 /* If the correct firmware patch file is not found, use the
1772                  * default firmware patch file instead
1773                  */
1774                 snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
1775                          ver->hw_platform, ver->hw_variant);
1776                 if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
1777                         BT_ERR("%s failed to open default Intel fw file: %s",
1778                                hdev->name, fwname);
1779                         return NULL;
1780                 }
1781         }
1782
1783         BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev->name, fwname);
1784
1785         return fw;
1786 }
1787
1788 static int btusb_setup_intel_patching(struct hci_dev *hdev,
1789                                       const struct firmware *fw,
1790                                       const u8 **fw_ptr, int *disable_patch)
1791 {
1792         struct sk_buff *skb;
1793         struct hci_command_hdr *cmd;
1794         const u8 *cmd_param;
1795         struct hci_event_hdr *evt = NULL;
1796         const u8 *evt_param = NULL;
1797         int remain = fw->size - (*fw_ptr - fw->data);
1798
1799         /* The first byte indicates the types of the patch command or event.
1800          * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
1801          * in the current firmware buffer doesn't start with 0x01 or
1802          * the size of remain buffer is smaller than HCI command header,
1803          * the firmware file is corrupted and it should stop the patching
1804          * process.
1805          */
1806         if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
1807                 BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name);
1808                 return -EINVAL;
1809         }
1810         (*fw_ptr)++;
1811         remain--;
1812
1813         cmd = (struct hci_command_hdr *)(*fw_ptr);
1814         *fw_ptr += sizeof(*cmd);
1815         remain -= sizeof(*cmd);
1816
1817         /* Ensure that the remain firmware data is long enough than the length
1818          * of command parameter. If not, the firmware file is corrupted.
1819          */
1820         if (remain < cmd->plen) {
1821                 BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name);
1822                 return -EFAULT;
1823         }
1824
1825         /* If there is a command that loads a patch in the firmware
1826          * file, then enable the patch upon success, otherwise just
1827          * disable the manufacturer mode, for example patch activation
1828          * is not required when the default firmware patch file is used
1829          * because there are no patch data to load.
1830          */
1831         if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
1832                 *disable_patch = 0;
1833
1834         cmd_param = *fw_ptr;
1835         *fw_ptr += cmd->plen;
1836         remain -= cmd->plen;
1837
1838         /* This reads the expected events when the above command is sent to the
1839          * device. Some vendor commands expects more than one events, for
1840          * example command status event followed by vendor specific event.
1841          * For this case, it only keeps the last expected event. so the command
1842          * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
1843          * last expected event.
1844          */
1845         while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
1846                 (*fw_ptr)++;
1847                 remain--;
1848
1849                 evt = (struct hci_event_hdr *)(*fw_ptr);
1850                 *fw_ptr += sizeof(*evt);
1851                 remain -= sizeof(*evt);
1852
1853                 if (remain < evt->plen) {
1854                         BT_ERR("%s Intel fw corrupted: invalid evt len",
1855                                hdev->name);
1856                         return -EFAULT;
1857                 }
1858
1859                 evt_param = *fw_ptr;
1860                 *fw_ptr += evt->plen;
1861                 remain -= evt->plen;
1862         }
1863
1864         /* Every HCI commands in the firmware file has its correspond event.
1865          * If event is not found or remain is smaller than zero, the firmware
1866          * file is corrupted.
1867          */
1868         if (!evt || !evt_param || remain < 0) {
1869                 BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name);
1870                 return -EFAULT;
1871         }
1872
1873         skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
1874                                 cmd_param, evt->evt, HCI_INIT_TIMEOUT);
1875         if (IS_ERR(skb)) {
1876                 BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
1877                        hdev->name, cmd->opcode, PTR_ERR(skb));
1878                 return PTR_ERR(skb);
1879         }
1880
1881         /* It ensures that the returned event matches the event data read from
1882          * the firmware file. At fist, it checks the length and then
1883          * the contents of the event.
1884          */
1885         if (skb->len != evt->plen) {
1886                 BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name,
1887                        le16_to_cpu(cmd->opcode));
1888                 kfree_skb(skb);
1889                 return -EFAULT;
1890         }
1891
1892         if (memcmp(skb->data, evt_param, evt->plen)) {
1893                 BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
1894                        hdev->name, le16_to_cpu(cmd->opcode));
1895                 kfree_skb(skb);
1896                 return -EFAULT;
1897         }
1898         kfree_skb(skb);
1899
1900         return 0;
1901 }
1902
1903 static int btusb_setup_intel(struct hci_dev *hdev)
1904 {
1905         struct sk_buff *skb;
1906         const struct firmware *fw;
1907         const u8 *fw_ptr;
1908         int disable_patch;
1909         struct intel_version *ver;
1910
1911         const u8 mfg_enable[] = { 0x01, 0x00 };
1912         const u8 mfg_disable[] = { 0x00, 0x00 };
1913         const u8 mfg_reset_deactivate[] = { 0x00, 0x01 };
1914         const u8 mfg_reset_activate[] = { 0x00, 0x02 };
1915
1916         BT_DBG("%s", hdev->name);
1917
1918         /* The controller has a bug with the first HCI command sent to it
1919          * returning number of completed commands as zero. This would stall the
1920          * command processing in the Bluetooth core.
1921          *
1922          * As a workaround, send HCI Reset command first which will reset the
1923          * number of completed commands and allow normal command processing
1924          * from now on.
1925          */
1926         skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
1927         if (IS_ERR(skb)) {
1928                 BT_ERR("%s sending initial HCI reset command failed (%ld)",
1929                        hdev->name, PTR_ERR(skb));
1930                 return PTR_ERR(skb);
1931         }
1932         kfree_skb(skb);
1933
1934         /* Read Intel specific controller version first to allow selection of
1935          * which firmware file to load.
1936          *
1937          * The returned information are hardware variant and revision plus
1938          * firmware variant, revision and build number.
1939          */
1940         skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
1941         if (IS_ERR(skb)) {
1942                 BT_ERR("%s reading Intel fw version command failed (%ld)",
1943                        hdev->name, PTR_ERR(skb));
1944                 return PTR_ERR(skb);
1945         }
1946
1947         if (skb->len != sizeof(*ver)) {
1948                 BT_ERR("%s Intel version event length mismatch", hdev->name);
1949                 kfree_skb(skb);
1950                 return -EIO;
1951         }
1952
1953         ver = (struct intel_version *)skb->data;
1954         if (ver->status) {
1955                 BT_ERR("%s Intel fw version event failed (%02x)", hdev->name,
1956                        ver->status);
1957                 kfree_skb(skb);
1958                 return -bt_to_errno(ver->status);
1959         }
1960
1961         BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
1962                 hdev->name, ver->hw_platform, ver->hw_variant,
1963                 ver->hw_revision, ver->fw_variant,  ver->fw_revision,
1964                 ver->fw_build_num, ver->fw_build_ww, ver->fw_build_yy,
1965                 ver->fw_patch_num);
1966
1967         /* fw_patch_num indicates the version of patch the device currently
1968          * have. If there is no patch data in the device, it is always 0x00.
1969          * So, if it is other than 0x00, no need to patch the deivce again.
1970          */
1971         if (ver->fw_patch_num) {
1972                 BT_INFO("%s: Intel device is already patched. patch num: %02x",
1973                         hdev->name, ver->fw_patch_num);
1974                 kfree_skb(skb);
1975                 btintel_check_bdaddr(hdev);
1976                 return 0;
1977         }
1978
1979         /* Opens the firmware patch file based on the firmware version read
1980          * from the controller. If it fails to open the matching firmware
1981          * patch file, it tries to open the default firmware patch file.
1982          * If no patch file is found, allow the device to operate without
1983          * a patch.
1984          */
1985         fw = btusb_setup_intel_get_fw(hdev, ver);
1986         if (!fw) {
1987                 kfree_skb(skb);
1988                 btintel_check_bdaddr(hdev);
1989                 return 0;
1990         }
1991         fw_ptr = fw->data;
1992
1993         /* This Intel specific command enables the manufacturer mode of the
1994          * controller.
1995          *
1996          * Only while this mode is enabled, the driver can download the
1997          * firmware patch data and configuration parameters.
1998          */
1999         skb = __hci_cmd_sync(hdev, 0xfc11, 2, mfg_enable, HCI_INIT_TIMEOUT);
2000         if (IS_ERR(skb)) {
2001                 BT_ERR("%s entering Intel manufacturer mode failed (%ld)",
2002                        hdev->name, PTR_ERR(skb));
2003                 release_firmware(fw);
2004                 return PTR_ERR(skb);
2005         }
2006
2007         if (skb->data[0]) {
2008                 u8 evt_status = skb->data[0];
2009
2010                 BT_ERR("%s enable Intel manufacturer mode event failed (%02x)",
2011                        hdev->name, evt_status);
2012                 kfree_skb(skb);
2013                 release_firmware(fw);
2014                 return -bt_to_errno(evt_status);
2015         }
2016         kfree_skb(skb);
2017
2018         disable_patch = 1;
2019
2020         /* The firmware data file consists of list of Intel specific HCI
2021          * commands and its expected events. The first byte indicates the
2022          * type of the message, either HCI command or HCI event.
2023          *
2024          * It reads the command and its expected event from the firmware file,
2025          * and send to the controller. Once __hci_cmd_sync_ev() returns,
2026          * the returned event is compared with the event read from the firmware
2027          * file and it will continue until all the messages are downloaded to
2028          * the controller.
2029          *
2030          * Once the firmware patching is completed successfully,
2031          * the manufacturer mode is disabled with reset and activating the
2032          * downloaded patch.
2033          *
2034          * If the firmware patching fails, the manufacturer mode is
2035          * disabled with reset and deactivating the patch.
2036          *
2037          * If the default patch file is used, no reset is done when disabling
2038          * the manufacturer.
2039          */
2040         while (fw->size > fw_ptr - fw->data) {
2041                 int ret;
2042
2043                 ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr,
2044                                                  &disable_patch);
2045                 if (ret < 0)
2046                         goto exit_mfg_deactivate;
2047         }
2048
2049         release_firmware(fw);
2050
2051         if (disable_patch)
2052                 goto exit_mfg_disable;
2053
2054         /* Patching completed successfully and disable the manufacturer mode
2055          * with reset and activate the downloaded firmware patches.
2056          */
2057         skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_activate),
2058                              mfg_reset_activate, HCI_INIT_TIMEOUT);
2059         if (IS_ERR(skb)) {
2060                 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
2061                        hdev->name, PTR_ERR(skb));
2062                 return PTR_ERR(skb);
2063         }
2064         kfree_skb(skb);
2065
2066         BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
2067                 hdev->name);
2068
2069         btintel_check_bdaddr(hdev);
2070         return 0;
2071
2072 exit_mfg_disable:
2073         /* Disable the manufacturer mode without reset */
2074         skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_disable), mfg_disable,
2075                              HCI_INIT_TIMEOUT);
2076         if (IS_ERR(skb)) {
2077                 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
2078                        hdev->name, PTR_ERR(skb));
2079                 return PTR_ERR(skb);
2080         }
2081         kfree_skb(skb);
2082
2083         BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name);
2084
2085         btintel_check_bdaddr(hdev);
2086         return 0;
2087
2088 exit_mfg_deactivate:
2089         release_firmware(fw);
2090
2091         /* Patching failed. Disable the manufacturer mode with reset and
2092          * deactivate the downloaded firmware patches.
2093          */
2094         skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_deactivate),
2095                              mfg_reset_deactivate, HCI_INIT_TIMEOUT);
2096         if (IS_ERR(skb)) {
2097                 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
2098                        hdev->name, PTR_ERR(skb));
2099                 return PTR_ERR(skb);
2100         }
2101         kfree_skb(skb);
2102
2103         BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
2104                 hdev->name);
2105
2106         btintel_check_bdaddr(hdev);
2107         return 0;
2108 }
2109
2110 static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
2111 {
2112         struct sk_buff *skb;
2113         struct hci_event_hdr *hdr;
2114         struct hci_ev_cmd_complete *evt;
2115
2116         skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
2117         if (!skb)
2118                 return -ENOMEM;
2119
2120         hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr));
2121         hdr->evt = HCI_EV_CMD_COMPLETE;
2122         hdr->plen = sizeof(*evt) + 1;
2123
2124         evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt));
2125         evt->ncmd = 0x01;
2126         evt->opcode = cpu_to_le16(opcode);
2127
2128         *skb_put(skb, 1) = 0x00;
2129
2130         bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
2131
2132         return hci_recv_frame(hdev, skb);
2133 }
2134
2135 static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
2136                                  int count)
2137 {
2138         /* When the device is in bootloader mode, then it can send
2139          * events via the bulk endpoint. These events are treated the
2140          * same way as the ones received from the interrupt endpoint.
2141          */
2142         if (test_bit(BTUSB_BOOTLOADER, &data->flags))
2143                 return btusb_recv_intr(data, buffer, count);
2144
2145         return btusb_recv_bulk(data, buffer, count);
2146 }
2147
2148 static void btusb_intel_bootup(struct btusb_data *data, const void *ptr,
2149                                unsigned int len)
2150 {
2151         const struct intel_bootup *evt = ptr;
2152
2153         if (len != sizeof(*evt))
2154                 return;
2155
2156         if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) {
2157                 smp_mb__after_atomic();
2158                 wake_up_bit(&data->flags, BTUSB_BOOTING);
2159         }
2160 }
2161
2162 static void btusb_intel_secure_send_result(struct btusb_data *data,
2163                                            const void *ptr, unsigned int len)
2164 {
2165         const struct intel_secure_send_result *evt = ptr;
2166
2167         if (len != sizeof(*evt))
2168                 return;
2169
2170         if (evt->result)
2171                 set_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
2172
2173         if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) &&
2174             test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) {
2175                 smp_mb__after_atomic();
2176                 wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
2177         }
2178 }
2179
2180 static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
2181 {
2182         struct btusb_data *data = hci_get_drvdata(hdev);
2183
2184         if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
2185                 struct hci_event_hdr *hdr = (void *)skb->data;
2186
2187                 if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff &&
2188                     hdr->plen > 0) {
2189                         const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1;
2190                         unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1;
2191
2192                         switch (skb->data[2]) {
2193                         case 0x02:
2194                                 /* When switching to the operational firmware
2195                                  * the device sends a vendor specific event
2196                                  * indicating that the bootup completed.
2197                                  */
2198                                 btusb_intel_bootup(data, ptr, len);
2199                                 break;
2200                         case 0x06:
2201                                 /* When the firmware loading completes the
2202                                  * device sends out a vendor specific event
2203                                  * indicating the result of the firmware
2204                                  * loading.
2205                                  */
2206                                 btusb_intel_secure_send_result(data, ptr, len);
2207                                 break;
2208                         }
2209                 }
2210         }
2211
2212         return hci_recv_frame(hdev, skb);
2213 }
2214
2215 static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
2216 {
2217         struct btusb_data *data = hci_get_drvdata(hdev);
2218         struct urb *urb;
2219
2220         BT_DBG("%s", hdev->name);
2221
2222         if (!test_bit(HCI_RUNNING, &hdev->flags))
2223                 return -EBUSY;
2224
2225         switch (bt_cb(skb)->pkt_type) {
2226         case HCI_COMMAND_PKT:
2227                 if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
2228                         struct hci_command_hdr *cmd = (void *)skb->data;
2229                         __u16 opcode = le16_to_cpu(cmd->opcode);
2230
2231                         /* When in bootloader mode and the command 0xfc09
2232                          * is received, it needs to be send down the
2233                          * bulk endpoint. So allocate a bulk URB instead.
2234                          */
2235                         if (opcode == 0xfc09)
2236                                 urb = alloc_bulk_urb(hdev, skb);
2237                         else
2238                                 urb = alloc_ctrl_urb(hdev, skb);
2239
2240                         /* When the 0xfc01 command is issued to boot into
2241                          * the operational firmware, it will actually not
2242                          * send a command complete event. To keep the flow
2243                          * control working inject that event here.
2244                          */
2245                         if (opcode == 0xfc01)
2246                                 inject_cmd_complete(hdev, opcode);
2247                 } else {
2248                         urb = alloc_ctrl_urb(hdev, skb);
2249                 }
2250                 if (IS_ERR(urb))
2251                         return PTR_ERR(urb);
2252
2253                 hdev->stat.cmd_tx++;
2254                 return submit_or_queue_tx_urb(hdev, urb);
2255
2256         case HCI_ACLDATA_PKT:
2257                 urb = alloc_bulk_urb(hdev, skb);
2258                 if (IS_ERR(urb))
2259                         return PTR_ERR(urb);
2260
2261                 hdev->stat.acl_tx++;
2262                 return submit_or_queue_tx_urb(hdev, urb);
2263
2264         case HCI_SCODATA_PKT:
2265                 if (hci_conn_num(hdev, SCO_LINK) < 1)
2266                         return -ENODEV;
2267
2268                 urb = alloc_isoc_urb(hdev, skb);
2269                 if (IS_ERR(urb))
2270                         return PTR_ERR(urb);
2271
2272                 hdev->stat.sco_tx++;
2273                 return submit_tx_urb(hdev, urb);
2274         }
2275
2276         return -EILSEQ;
2277 }
2278
2279 static int btusb_intel_secure_send(struct hci_dev *hdev, u8 fragment_type,
2280                                    u32 plen, const void *param)
2281 {
2282         while (plen > 0) {
2283                 struct sk_buff *skb;
2284                 u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen;
2285
2286                 cmd_param[0] = fragment_type;
2287                 memcpy(cmd_param + 1, param, fragment_len);
2288
2289                 skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1,
2290                                      cmd_param, HCI_INIT_TIMEOUT);
2291                 if (IS_ERR(skb))
2292                         return PTR_ERR(skb);
2293
2294                 kfree_skb(skb);
2295
2296                 plen -= fragment_len;
2297                 param += fragment_len;
2298         }
2299
2300         return 0;
2301 }
2302
2303 static void btusb_intel_version_info(struct hci_dev *hdev,
2304                                      struct intel_version *ver)
2305 {
2306         const char *variant;
2307
2308         switch (ver->fw_variant) {
2309         case 0x06:
2310                 variant = "Bootloader";
2311                 break;
2312         case 0x23:
2313                 variant = "Firmware";
2314                 break;
2315         default:
2316                 return;
2317         }
2318
2319         BT_INFO("%s: %s revision %u.%u build %u week %u %u", hdev->name,
2320                 variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f,
2321                 ver->fw_build_num, ver->fw_build_ww, 2000 + ver->fw_build_yy);
2322 }
2323
2324 static int btusb_setup_intel_new(struct hci_dev *hdev)
2325 {
2326         static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
2327                                           0x00, 0x08, 0x04, 0x00 };
2328         struct btusb_data *data = hci_get_drvdata(hdev);
2329         struct sk_buff *skb;
2330         struct intel_version *ver;
2331         struct intel_boot_params *params;
2332         const struct firmware *fw;
2333         const u8 *fw_ptr;
2334         char fwname[64];
2335         ktime_t calltime, delta, rettime;
2336         unsigned long long duration;
2337         int err;
2338
2339         BT_DBG("%s", hdev->name);
2340
2341         calltime = ktime_get();
2342
2343         /* Read the Intel version information to determine if the device
2344          * is in bootloader mode or if it already has operational firmware
2345          * loaded.
2346          */
2347         skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
2348         if (IS_ERR(skb)) {
2349                 BT_ERR("%s: Reading Intel version information failed (%ld)",
2350                        hdev->name, PTR_ERR(skb));
2351                 return PTR_ERR(skb);
2352         }
2353
2354         if (skb->len != sizeof(*ver)) {
2355                 BT_ERR("%s: Intel version event size mismatch", hdev->name);
2356                 kfree_skb(skb);
2357                 return -EILSEQ;
2358         }
2359
2360         ver = (struct intel_version *)skb->data;
2361         if (ver->status) {
2362                 BT_ERR("%s: Intel version command failure (%02x)",
2363                        hdev->name, ver->status);
2364                 err = -bt_to_errno(ver->status);
2365                 kfree_skb(skb);
2366                 return err;
2367         }
2368
2369         /* The hardware platform number has a fixed value of 0x37 and
2370          * for now only accept this single value.
2371          */
2372         if (ver->hw_platform != 0x37) {
2373                 BT_ERR("%s: Unsupported Intel hardware platform (%u)",
2374                        hdev->name, ver->hw_platform);
2375                 kfree_skb(skb);
2376                 return -EINVAL;
2377         }
2378
2379         /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
2380          * supported by this firmware loading method. This check has been
2381          * put in place to ensure correct forward compatibility options
2382          * when newer hardware variants come along.
2383          */
2384         if (ver->hw_variant != 0x0b) {
2385                 BT_ERR("%s: Unsupported Intel hardware variant (%u)",
2386                        hdev->name, ver->hw_variant);
2387                 kfree_skb(skb);
2388                 return -EINVAL;
2389         }
2390
2391         btusb_intel_version_info(hdev, ver);
2392
2393         /* The firmware variant determines if the device is in bootloader
2394          * mode or is running operational firmware. The value 0x06 identifies
2395          * the bootloader and the value 0x23 identifies the operational
2396          * firmware.
2397          *
2398          * When the operational firmware is already present, then only
2399          * the check for valid Bluetooth device address is needed. This
2400          * determines if the device will be added as configured or
2401          * unconfigured controller.
2402          *
2403          * It is not possible to use the Secure Boot Parameters in this
2404          * case since that command is only available in bootloader mode.
2405          */
2406         if (ver->fw_variant == 0x23) {
2407                 kfree_skb(skb);
2408                 clear_bit(BTUSB_BOOTLOADER, &data->flags);
2409                 btintel_check_bdaddr(hdev);
2410                 return 0;
2411         }
2412
2413         /* If the device is not in bootloader mode, then the only possible
2414          * choice is to return an error and abort the device initialization.
2415          */
2416         if (ver->fw_variant != 0x06) {
2417                 BT_ERR("%s: Unsupported Intel firmware variant (%u)",
2418                        hdev->name, ver->fw_variant);
2419                 kfree_skb(skb);
2420                 return -ENODEV;
2421         }
2422
2423         kfree_skb(skb);
2424
2425         /* Read the secure boot parameters to identify the operating
2426          * details of the bootloader.
2427          */
2428         skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
2429         if (IS_ERR(skb)) {
2430                 BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
2431                        hdev->name, PTR_ERR(skb));
2432                 return PTR_ERR(skb);
2433         }
2434
2435         if (skb->len != sizeof(*params)) {
2436                 BT_ERR("%s: Intel boot parameters size mismatch", hdev->name);
2437                 kfree_skb(skb);
2438                 return -EILSEQ;
2439         }
2440
2441         params = (struct intel_boot_params *)skb->data;
2442         if (params->status) {
2443                 BT_ERR("%s: Intel boot parameters command failure (%02x)",
2444                        hdev->name, params->status);
2445                 err = -bt_to_errno(params->status);
2446                 kfree_skb(skb);
2447                 return err;
2448         }
2449
2450         BT_INFO("%s: Device revision is %u", hdev->name,
2451                 le16_to_cpu(params->dev_revid));
2452
2453         BT_INFO("%s: Secure boot is %s", hdev->name,
2454                 params->secure_boot ? "enabled" : "disabled");
2455
2456         BT_INFO("%s: Minimum firmware build %u week %u %u", hdev->name,
2457                 params->min_fw_build_nn, params->min_fw_build_cw,
2458                 2000 + params->min_fw_build_yy);
2459
2460         /* It is required that every single firmware fragment is acknowledged
2461          * with a command complete event. If the boot parameters indicate
2462          * that this bootloader does not send them, then abort the setup.
2463          */
2464         if (params->limited_cce != 0x00) {
2465                 BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
2466                        hdev->name, params->limited_cce);
2467                 kfree_skb(skb);
2468                 return -EINVAL;
2469         }
2470
2471         /* If the OTP has no valid Bluetooth device address, then there will
2472          * also be no valid address for the operational firmware.
2473          */
2474         if (!bacmp(&params->otp_bdaddr, BDADDR_ANY)) {
2475                 BT_INFO("%s: No device address configured", hdev->name);
2476                 set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
2477         }
2478
2479         /* With this Intel bootloader only the hardware variant and device
2480          * revision information are used to select the right firmware.
2481          *
2482          * Currently this bootloader support is limited to hardware variant
2483          * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
2484          */
2485         snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.sfi",
2486                  le16_to_cpu(params->dev_revid));
2487
2488         err = request_firmware(&fw, fwname, &hdev->dev);
2489         if (err < 0) {
2490                 BT_ERR("%s: Failed to load Intel firmware file (%d)",
2491                        hdev->name, err);
2492                 kfree_skb(skb);
2493                 return err;
2494         }
2495
2496         BT_INFO("%s: Found device firmware: %s", hdev->name, fwname);
2497
2498         kfree_skb(skb);
2499
2500         if (fw->size < 644) {
2501                 BT_ERR("%s: Invalid size of firmware file (%zu)",
2502                        hdev->name, fw->size);
2503                 err = -EBADF;
2504                 goto done;
2505         }
2506
2507         set_bit(BTUSB_DOWNLOADING, &data->flags);
2508
2509         /* Start the firmware download transaction with the Init fragment
2510          * represented by the 128 bytes of CSS header.
2511          */
2512         err = btusb_intel_secure_send(hdev, 0x00, 128, fw->data);
2513         if (err < 0) {
2514                 BT_ERR("%s: Failed to send firmware header (%d)",
2515                        hdev->name, err);
2516                 goto done;
2517         }
2518
2519         /* Send the 256 bytes of public key information from the firmware
2520          * as the PKey fragment.
2521          */
2522         err = btusb_intel_secure_send(hdev, 0x03, 256, fw->data + 128);
2523         if (err < 0) {
2524                 BT_ERR("%s: Failed to send firmware public key (%d)",
2525                        hdev->name, err);
2526                 goto done;
2527         }
2528
2529         /* Send the 256 bytes of signature information from the firmware
2530          * as the Sign fragment.
2531          */
2532         err = btusb_intel_secure_send(hdev, 0x02, 256, fw->data + 388);
2533         if (err < 0) {
2534                 BT_ERR("%s: Failed to send firmware signature (%d)",
2535                        hdev->name, err);
2536                 goto done;
2537         }
2538
2539         fw_ptr = fw->data + 644;
2540
2541         while (fw_ptr - fw->data < fw->size) {
2542                 struct hci_command_hdr *cmd = (void *)fw_ptr;
2543                 u8 cmd_len;
2544
2545                 cmd_len = sizeof(*cmd) + cmd->plen;
2546
2547                 /* Send each command from the firmware data buffer as
2548                  * a single Data fragment.
2549                  */
2550                 err = btusb_intel_secure_send(hdev, 0x01, cmd_len, fw_ptr);
2551                 if (err < 0) {
2552                         BT_ERR("%s: Failed to send firmware data (%d)",
2553                                hdev->name, err);
2554                         goto done;
2555                 }
2556
2557                 fw_ptr += cmd_len;
2558         }
2559
2560         set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
2561
2562         BT_INFO("%s: Waiting for firmware download to complete", hdev->name);
2563
2564         /* Before switching the device into operational mode and with that
2565          * booting the loaded firmware, wait for the bootloader notification
2566          * that all fragments have been successfully received.
2567          *
2568          * When the event processing receives the notification, then the
2569          * BTUSB_DOWNLOADING flag will be cleared.
2570          *
2571          * The firmware loading should not take longer than 5 seconds
2572          * and thus just timeout if that happens and fail the setup
2573          * of this device.
2574          */
2575         err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
2576                                   TASK_INTERRUPTIBLE,
2577                                   msecs_to_jiffies(5000));
2578         if (err == 1) {
2579                 BT_ERR("%s: Firmware loading interrupted", hdev->name);
2580                 err = -EINTR;
2581                 goto done;
2582         }
2583
2584         if (err) {
2585                 BT_ERR("%s: Firmware loading timeout", hdev->name);
2586                 err = -ETIMEDOUT;
2587                 goto done;
2588         }
2589
2590         if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
2591                 BT_ERR("%s: Firmware loading failed", hdev->name);
2592                 err = -ENOEXEC;
2593                 goto done;
2594         }
2595
2596         rettime = ktime_get();
2597         delta = ktime_sub(rettime, calltime);
2598         duration = (unsigned long long) ktime_to_ns(delta) >> 10;
2599
2600         BT_INFO("%s: Firmware loaded in %llu usecs", hdev->name, duration);
2601
2602 done:
2603         release_firmware(fw);
2604
2605         if (err < 0)
2606                 return err;
2607
2608         calltime = ktime_get();
2609
2610         set_bit(BTUSB_BOOTING, &data->flags);
2611
2612         skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
2613                              HCI_INIT_TIMEOUT);
2614         if (IS_ERR(skb))
2615                 return PTR_ERR(skb);
2616
2617         kfree_skb(skb);
2618
2619         /* The bootloader will not indicate when the device is ready. This
2620          * is done by the operational firmware sending bootup notification.
2621          *
2622          * Booting into operational firmware should not take longer than
2623          * 1 second. However if that happens, then just fail the setup
2624          * since something went wrong.
2625          */
2626         BT_INFO("%s: Waiting for device to boot", hdev->name);
2627
2628         err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
2629                                   TASK_INTERRUPTIBLE,
2630                                   msecs_to_jiffies(1000));
2631
2632         if (err == 1) {
2633                 BT_ERR("%s: Device boot interrupted", hdev->name);
2634                 return -EINTR;
2635         }
2636
2637         if (err) {
2638                 BT_ERR("%s: Device boot timeout", hdev->name);
2639                 return -ETIMEDOUT;
2640         }
2641
2642         rettime = ktime_get();
2643         delta = ktime_sub(rettime, calltime);
2644         duration = (unsigned long long) ktime_to_ns(delta) >> 10;
2645
2646         BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration);
2647
2648         clear_bit(BTUSB_BOOTLOADER, &data->flags);
2649
2650         return 0;
2651 }
2652
2653 static void btusb_hw_error_intel(struct hci_dev *hdev, u8 code)
2654 {
2655         struct sk_buff *skb;
2656         u8 type = 0x00;
2657
2658         BT_ERR("%s: Hardware error 0x%2.2x", hdev->name, code);
2659
2660         skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
2661         if (IS_ERR(skb)) {
2662                 BT_ERR("%s: Reset after hardware error failed (%ld)",
2663                        hdev->name, PTR_ERR(skb));
2664                 return;
2665         }
2666         kfree_skb(skb);
2667
2668         skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT);
2669         if (IS_ERR(skb)) {
2670                 BT_ERR("%s: Retrieving Intel exception info failed (%ld)",
2671                        hdev->name, PTR_ERR(skb));
2672                 return;
2673         }
2674
2675         if (skb->len != 13) {
2676                 BT_ERR("%s: Exception info size mismatch", hdev->name);
2677                 kfree_skb(skb);
2678                 return;
2679         }
2680
2681         if (skb->data[0] != 0x00) {
2682                 BT_ERR("%s: Exception info command failure (%02x)",
2683                        hdev->name, skb->data[0]);
2684                 kfree_skb(skb);
2685                 return;
2686         }
2687
2688         BT_ERR("%s: Exception info %s", hdev->name, (char *)(skb->data + 1));
2689
2690         kfree_skb(skb);
2691 }
2692
2693 static int btusb_shutdown_intel(struct hci_dev *hdev)
2694 {
2695         struct sk_buff *skb;
2696         long ret;
2697
2698         /* Some platforms have an issue with BT LED when the interface is
2699          * down or BT radio is turned off, which takes 5 seconds to BT LED
2700          * goes off. This command turns off the BT LED immediately.
2701          */
2702         skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
2703         if (IS_ERR(skb)) {
2704                 ret = PTR_ERR(skb);
2705                 BT_ERR("%s: turning off Intel device LED failed (%ld)",
2706                        hdev->name, ret);
2707                 return ret;
2708         }
2709         kfree_skb(skb);
2710
2711         return 0;
2712 }
2713
2714 static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
2715                                     const bdaddr_t *bdaddr)
2716 {
2717         struct sk_buff *skb;
2718         u8 buf[8];
2719         long ret;
2720
2721         buf[0] = 0xfe;
2722         buf[1] = sizeof(bdaddr_t);
2723         memcpy(buf + 2, bdaddr, sizeof(bdaddr_t));
2724
2725         skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT);
2726         if (IS_ERR(skb)) {
2727                 ret = PTR_ERR(skb);
2728                 BT_ERR("%s: changing Marvell device address failed (%ld)",
2729                        hdev->name, ret);
2730                 return ret;
2731         }
2732         kfree_skb(skb);
2733
2734         return 0;
2735 }
2736
2737 static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
2738                                     const bdaddr_t *bdaddr)
2739 {
2740         struct sk_buff *skb;
2741         u8 buf[10];
2742         long ret;
2743
2744         buf[0] = 0x01;
2745         buf[1] = 0x01;
2746         buf[2] = 0x00;
2747         buf[3] = sizeof(bdaddr_t);
2748         memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
2749
2750         skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
2751         if (IS_ERR(skb)) {
2752                 ret = PTR_ERR(skb);
2753                 BT_ERR("%s: Change address command failed (%ld)",
2754                        hdev->name, ret);
2755                 return ret;
2756         }
2757         kfree_skb(skb);
2758
2759         return 0;
2760 }
2761
2762 #define QCA_DFU_PACKET_LEN      4096
2763
2764 #define QCA_GET_TARGET_VERSION  0x09
2765 #define QCA_CHECK_STATUS        0x05
2766 #define QCA_DFU_DOWNLOAD        0x01
2767
2768 #define QCA_SYSCFG_UPDATED      0x40
2769 #define QCA_PATCH_UPDATED       0x80
2770 #define QCA_DFU_TIMEOUT         3000
2771
2772 struct qca_version {
2773         __le32  rom_version;
2774         __le32  patch_version;
2775         __le32  ram_version;
2776         __le32  ref_clock;
2777         __u8    reserved[4];
2778 } __packed;
2779
2780 struct qca_rampatch_version {
2781         __le16  rom_version;
2782         __le16  patch_version;
2783 } __packed;
2784
2785 struct qca_device_info {
2786         u32     rom_version;
2787         u8      rampatch_hdr;   /* length of header in rampatch */
2788         u8      nvm_hdr;        /* length of header in NVM */
2789         u8      ver_offset;     /* offset of version structure in rampatch */
2790 };
2791
2792 static const struct qca_device_info qca_devices_table[] = {
2793         { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
2794         { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
2795         { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
2796         { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
2797         { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
2798 };
2799
2800 static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request,
2801                                      void *data, u16 size)
2802 {
2803         struct btusb_data *btdata = hci_get_drvdata(hdev);
2804         struct usb_device *udev = btdata->udev;
2805         int pipe, err;
2806         u8 *buf;
2807
2808         buf = kmalloc(size, GFP_KERNEL);
2809         if (!buf)
2810                 return -ENOMEM;
2811
2812         /* Found some of USB hosts have IOT issues with ours so that we should
2813          * not wait until HCI layer is ready.
2814          */
2815         pipe = usb_rcvctrlpipe(udev, 0);
2816         err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN,
2817                               0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
2818         if (err < 0) {
2819                 BT_ERR("%s: Failed to access otp area (%d)", hdev->name, err);
2820                 goto done;
2821         }
2822
2823         memcpy(data, buf, size);
2824
2825 done:
2826         kfree(buf);
2827
2828         return err;
2829 }
2830
2831 static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
2832                                        const struct firmware *firmware,
2833                                        size_t hdr_size)
2834 {
2835         struct btusb_data *btdata = hci_get_drvdata(hdev);
2836         struct usb_device *udev = btdata->udev;
2837         size_t count, size, sent = 0;
2838         int pipe, len, err;
2839         u8 *buf;
2840
2841         buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL);
2842         if (!buf)
2843                 return -ENOMEM;
2844
2845         count = firmware->size;
2846
2847         size = min_t(size_t, count, hdr_size);
2848         memcpy(buf, firmware->data, size);
2849
2850         /* USB patches should go down to controller through USB path
2851          * because binary format fits to go down through USB channel.
2852          * USB control path is for patching headers and USB bulk is for
2853          * patch body.
2854          */
2855         pipe = usb_sndctrlpipe(udev, 0);
2856         err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR,
2857                               0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
2858         if (err < 0) {
2859                 BT_ERR("%s: Failed to send headers (%d)", hdev->name, err);
2860                 goto done;
2861         }
2862
2863         sent += size;
2864         count -= size;
2865
2866         while (count) {
2867                 size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
2868
2869                 memcpy(buf, firmware->data + sent, size);
2870
2871                 pipe = usb_sndbulkpipe(udev, 0x02);
2872                 err = usb_bulk_msg(udev, pipe, buf, size, &len,
2873                                    QCA_DFU_TIMEOUT);
2874                 if (err < 0) {
2875                         BT_ERR("%s: Failed to send body at %zd of %zd (%d)",
2876                                hdev->name, sent, firmware->size, err);
2877                         break;
2878                 }
2879
2880                 if (size != len) {
2881                         BT_ERR("%s: Failed to get bulk buffer", hdev->name);
2882                         err = -EILSEQ;
2883                         break;
2884                 }
2885
2886                 sent  += size;
2887                 count -= size;
2888         }
2889
2890 done:
2891         kfree(buf);
2892         return err;
2893 }
2894
2895 static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
2896                                          struct qca_version *ver,
2897                                          const struct qca_device_info *info)
2898 {
2899         struct qca_rampatch_version *rver;
2900         const struct firmware *fw;
2901         u32 ver_rom, ver_patch;
2902         u16 rver_rom, rver_patch;
2903         char fwname[64];
2904         int err;
2905
2906         ver_rom = le32_to_cpu(ver->rom_version);
2907         ver_patch = le32_to_cpu(ver->patch_version);
2908
2909         snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom);
2910
2911         err = request_firmware(&fw, fwname, &hdev->dev);
2912         if (err) {
2913                 BT_ERR("%s: failed to request rampatch file: %s (%d)",
2914                        hdev->name, fwname, err);
2915                 return err;
2916         }
2917
2918         BT_INFO("%s: using rampatch file: %s", hdev->name, fwname);
2919
2920         rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
2921         rver_rom = le16_to_cpu(rver->rom_version);
2922         rver_patch = le16_to_cpu(rver->patch_version);
2923
2924         BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x "
2925                 "build 0x%x", hdev->name, rver_rom, rver_patch, ver_rom,
2926                 ver_patch);
2927
2928         if (rver_rom != ver_rom || rver_patch <= ver_patch) {
2929                 BT_ERR("%s: rampatch file version did not match with firmware",
2930                        hdev->name);
2931                 err = -EINVAL;
2932                 goto done;
2933         }
2934
2935         err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr);
2936
2937 done:
2938         release_firmware(fw);
2939
2940         return err;
2941 }
2942
2943 static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
2944                                     struct qca_version *ver,
2945                                     const struct qca_device_info *info)
2946 {
2947         const struct firmware *fw;
2948         char fwname[64];
2949         int err;
2950
2951         snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
2952                  le32_to_cpu(ver->rom_version));
2953
2954         err = request_firmware(&fw, fwname, &hdev->dev);
2955         if (err) {
2956                 BT_ERR("%s: failed to request NVM file: %s (%d)",
2957                        hdev->name, fwname, err);
2958                 return err;
2959         }
2960
2961         BT_INFO("%s: using NVM file: %s", hdev->name, fwname);
2962
2963         err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);
2964
2965         release_firmware(fw);
2966
2967         return err;
2968 }
2969
2970 static int btusb_setup_qca(struct hci_dev *hdev)
2971 {
2972         const struct qca_device_info *info = NULL;
2973         struct qca_version ver;
2974         u32 ver_rom;
2975         u8 status;
2976         int i, err;
2977
2978         err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver,
2979                                         sizeof(ver));
2980         if (err < 0)
2981                 return err;
2982
2983         ver_rom = le32_to_cpu(ver.rom_version);
2984         for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
2985                 if (ver_rom == qca_devices_table[i].rom_version)
2986                         info = &qca_devices_table[i];
2987         }
2988         if (!info) {
2989                 BT_ERR("%s: don't support firmware rome 0x%x", hdev->name,
2990                        ver_rom);
2991                 return -ENODEV;
2992         }
2993
2994         err = btusb_qca_send_vendor_req(hdev, QCA_CHECK_STATUS, &status,
2995                                         sizeof(status));
2996         if (err < 0)
2997                 return err;
2998
2999         if (!(status & QCA_PATCH_UPDATED)) {
3000                 err = btusb_setup_qca_load_rampatch(hdev, &ver, info);
3001                 if (err < 0)
3002                         return err;
3003         }
3004
3005         if (!(status & QCA_SYSCFG_UPDATED)) {
3006                 err = btusb_setup_qca_load_nvm(hdev, &ver, info);
3007                 if (err < 0)
3008                         return err;
3009         }
3010
3011         return 0;
3012 }
3013
3014 static int btusb_probe(struct usb_interface *intf,
3015                        const struct usb_device_id *id)
3016 {
3017         struct usb_endpoint_descriptor *ep_desc;
3018         struct btusb_data *data;
3019         struct hci_dev *hdev;
3020         int i, err;
3021
3022         BT_DBG("intf %p id %p", intf, id);
3023
3024         /* interface numbers are hardcoded in the spec */
3025         if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
3026                 return -ENODEV;
3027
3028         if (!id->driver_info) {
3029                 const struct usb_device_id *match;
3030
3031                 match = usb_match_id(intf, blacklist_table);
3032                 if (match)
3033                         id = match;
3034         }
3035
3036         if (id->driver_info == BTUSB_IGNORE)
3037                 return -ENODEV;
3038
3039         if (id->driver_info & BTUSB_ATH3012) {
3040                 struct usb_device *udev = interface_to_usbdev(intf);
3041
3042                 /* Old firmware would otherwise let ath3k driver load
3043                  * patch and sysconfig files */
3044                 if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001)
3045                         return -ENODEV;
3046         }
3047
3048         data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
3049         if (!data)
3050                 return -ENOMEM;
3051
3052         for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
3053                 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
3054
3055                 if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) {
3056                         data->intr_ep = ep_desc;
3057                         continue;
3058                 }
3059
3060                 if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
3061                         data->bulk_tx_ep = ep_desc;
3062                         continue;
3063                 }
3064
3065                 if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
3066                         data->bulk_rx_ep = ep_desc;
3067                         continue;
3068                 }
3069         }
3070
3071         if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep)
3072                 return -ENODEV;
3073
3074         if (id->driver_info & BTUSB_AMP) {
3075                 data->cmdreq_type = USB_TYPE_CLASS | 0x01;
3076                 data->cmdreq = 0x2b;
3077         } else {
3078                 data->cmdreq_type = USB_TYPE_CLASS;
3079                 data->cmdreq = 0x00;
3080         }
3081
3082         data->udev = interface_to_usbdev(intf);
3083         data->intf = intf;
3084
3085         INIT_WORK(&data->work, btusb_work);
3086         INIT_WORK(&data->waker, btusb_waker);
3087         init_usb_anchor(&data->deferred);
3088         init_usb_anchor(&data->tx_anchor);
3089         spin_lock_init(&data->txlock);
3090
3091         init_usb_anchor(&data->intr_anchor);
3092         init_usb_anchor(&data->bulk_anchor);
3093         init_usb_anchor(&data->isoc_anchor);
3094         spin_lock_init(&data->rxlock);
3095
3096         if (id->driver_info & BTUSB_INTEL_NEW) {
3097                 data->recv_event = btusb_recv_event_intel;
3098                 data->recv_bulk = btusb_recv_bulk_intel;
3099                 set_bit(BTUSB_BOOTLOADER, &data->flags);
3100         } else {
3101                 data->recv_event = hci_recv_frame;
3102                 data->recv_bulk = btusb_recv_bulk;
3103         }
3104
3105         hdev = hci_alloc_dev();
3106         if (!hdev)
3107                 return -ENOMEM;
3108
3109         hdev->bus = HCI_USB;
3110         hci_set_drvdata(hdev, data);
3111
3112         if (id->driver_info & BTUSB_AMP)
3113                 hdev->dev_type = HCI_AMP;
3114         else
3115                 hdev->dev_type = HCI_BREDR;
3116
3117         data->hdev = hdev;
3118
3119         SET_HCIDEV_DEV(hdev, &intf->dev);
3120
3121         hdev->open   = btusb_open;
3122         hdev->close  = btusb_close;
3123         hdev->flush  = btusb_flush;
3124         hdev->send   = btusb_send_frame;
3125         hdev->notify = btusb_notify;
3126
3127         if (id->driver_info & BTUSB_BCM92035)
3128                 hdev->setup = btusb_setup_bcm92035;
3129
3130 #ifdef CONFIG_BT_HCIBTUSB_BCM
3131         if (id->driver_info & BTUSB_BCM_PATCHRAM) {
3132                 hdev->setup = btbcm_setup_patchram;
3133                 hdev->set_bdaddr = btbcm_set_bdaddr;
3134         }
3135
3136         if (id->driver_info & BTUSB_BCM_APPLE)
3137                 hdev->setup = btbcm_setup_apple;
3138 #endif
3139
3140         if (id->driver_info & BTUSB_INTEL) {
3141                 hdev->setup = btusb_setup_intel;
3142                 hdev->shutdown = btusb_shutdown_intel;
3143                 hdev->set_bdaddr = btintel_set_bdaddr;
3144                 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
3145                 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
3146         }
3147
3148         if (id->driver_info & BTUSB_INTEL_NEW) {
3149                 hdev->send = btusb_send_frame_intel;
3150                 hdev->setup = btusb_setup_intel_new;
3151                 hdev->hw_error = btusb_hw_error_intel;
3152                 hdev->set_bdaddr = btintel_set_bdaddr;
3153                 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
3154         }
3155
3156         if (id->driver_info & BTUSB_MARVELL)
3157                 hdev->set_bdaddr = btusb_set_bdaddr_marvell;
3158
3159         if (id->driver_info & BTUSB_SWAVE) {
3160                 set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
3161                 set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
3162         }
3163
3164         if (id->driver_info & BTUSB_INTEL_BOOT)
3165                 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
3166
3167         if (id->driver_info & BTUSB_ATH3012) {
3168                 hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
3169                 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
3170                 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
3171         }
3172
3173         if (id->driver_info & BTUSB_QCA_ROME) {
3174                 data->setup_on_usb = btusb_setup_qca;
3175                 hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
3176         }
3177
3178         if (id->driver_info & BTUSB_REALTEK)
3179                 hdev->setup = btusb_setup_realtek;
3180
3181         if (id->driver_info & BTUSB_AMP) {
3182                 /* AMP controllers do not support SCO packets */
3183                 data->isoc = NULL;
3184         } else {
3185                 /* Interface numbers are hardcoded in the specification */
3186                 data->isoc = usb_ifnum_to_if(data->udev, 1);
3187         }
3188
3189         if (!reset)
3190                 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
3191
3192         if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
3193                 if (!disable_scofix)
3194                         set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
3195         }
3196
3197         if (id->driver_info & BTUSB_BROKEN_ISOC)
3198                 data->isoc = NULL;
3199
3200         if (id->driver_info & BTUSB_DIGIANSWER) {
3201                 data->cmdreq_type = USB_TYPE_VENDOR;
3202                 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
3203         }
3204
3205         if (id->driver_info & BTUSB_CSR) {
3206                 struct usb_device *udev = data->udev;
3207                 u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
3208
3209                 /* Old firmware would otherwise execute USB reset */
3210                 if (bcdDevice < 0x117)
3211                         set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
3212
3213                 /* Fake CSR devices with broken commands */
3214                 if (bcdDevice <= 0x100)
3215                         hdev->setup = btusb_setup_csr;
3216
3217                 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
3218         }
3219
3220         if (id->driver_info & BTUSB_SNIFFER) {
3221                 struct usb_device *udev = data->udev;
3222
3223                 /* New sniffer firmware has crippled HCI interface */
3224                 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
3225                         set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
3226         }
3227
3228         if (id->driver_info & BTUSB_INTEL_BOOT) {
3229                 /* A bug in the bootloader causes that interrupt interface is
3230                  * only enabled after receiving SetInterface(0, AltSetting=0).
3231                  */
3232                 err = usb_set_interface(data->udev, 0, 0);
3233                 if (err < 0) {
3234                         BT_ERR("failed to set interface 0, alt 0 %d", err);
3235                         hci_free_dev(hdev);
3236                         return err;
3237                 }
3238         }
3239
3240         if (data->isoc) {
3241                 err = usb_driver_claim_interface(&btusb_driver,
3242                                                  data->isoc, data);
3243                 if (err < 0) {
3244                         hci_free_dev(hdev);
3245                         return err;
3246                 }
3247         }
3248
3249         err = hci_register_dev(hdev);
3250         if (err < 0) {
3251                 hci_free_dev(hdev);
3252                 return err;
3253         }
3254
3255         usb_set_intfdata(intf, data);
3256
3257         return 0;
3258 }
3259
3260 static void btusb_disconnect(struct usb_interface *intf)
3261 {
3262         struct btusb_data *data = usb_get_intfdata(intf);
3263         struct hci_dev *hdev;
3264
3265         BT_DBG("intf %p", intf);
3266
3267         if (!data)
3268                 return;
3269
3270         hdev = data->hdev;
3271         usb_set_intfdata(data->intf, NULL);
3272
3273         if (data->isoc)
3274                 usb_set_intfdata(data->isoc, NULL);
3275
3276         hci_unregister_dev(hdev);
3277
3278         if (intf == data->isoc)
3279                 usb_driver_release_interface(&btusb_driver, data->intf);
3280         else if (data->isoc)
3281                 usb_driver_release_interface(&btusb_driver, data->isoc);
3282
3283         hci_free_dev(hdev);
3284 }
3285
3286 #ifdef CONFIG_PM
3287 static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
3288 {
3289         struct btusb_data *data = usb_get_intfdata(intf);
3290
3291         BT_DBG("intf %p", intf);
3292
3293         if (data->suspend_count++)
3294                 return 0;
3295
3296         spin_lock_irq(&data->txlock);
3297         if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) {
3298                 set_bit(BTUSB_SUSPENDING, &data->flags);
3299                 spin_unlock_irq(&data->txlock);
3300         } else {
3301                 spin_unlock_irq(&data->txlock);
3302                 data->suspend_count--;
3303                 return -EBUSY;
3304         }
3305
3306         cancel_work_sync(&data->work);
3307
3308         btusb_stop_traffic(data);
3309         usb_kill_anchored_urbs(&data->tx_anchor);
3310
3311         return 0;
3312 }
3313
3314 static void play_deferred(struct btusb_data *data)
3315 {
3316         struct urb *urb;
3317         int err;
3318
3319         while ((urb = usb_get_from_anchor(&data->deferred))) {
3320                 err = usb_submit_urb(urb, GFP_ATOMIC);
3321                 if (err < 0)
3322                         break;
3323
3324                 data->tx_in_flight++;
3325         }
3326         usb_scuttle_anchored_urbs(&data->deferred);
3327 }
3328
3329 static int btusb_resume(struct usb_interface *intf)
3330 {
3331         struct btusb_data *data = usb_get_intfdata(intf);
3332         struct hci_dev *hdev = data->hdev;
3333         int err = 0;
3334
3335         BT_DBG("intf %p", intf);
3336
3337         if (--data->suspend_count)
3338                 return 0;
3339
3340         if (!test_bit(HCI_RUNNING, &hdev->flags))
3341                 goto done;
3342
3343         if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) {
3344                 err = btusb_submit_intr_urb(hdev, GFP_NOIO);
3345                 if (err < 0) {
3346                         clear_bit(BTUSB_INTR_RUNNING, &data->flags);
3347                         goto failed;
3348                 }
3349         }
3350
3351         if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) {
3352                 err = btusb_submit_bulk_urb(hdev, GFP_NOIO);
3353                 if (err < 0) {
3354                         clear_bit(BTUSB_BULK_RUNNING, &data->flags);
3355                         goto failed;
3356                 }
3357
3358                 btusb_submit_bulk_urb(hdev, GFP_NOIO);
3359         }
3360
3361         if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
3362                 if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0)
3363                         clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
3364                 else
3365                         btusb_submit_isoc_urb(hdev, GFP_NOIO);
3366         }
3367
3368         spin_lock_irq(&data->txlock);
3369         play_deferred(data);
3370         clear_bit(BTUSB_SUSPENDING, &data->flags);
3371         spin_unlock_irq(&data->txlock);
3372         schedule_work(&data->work);
3373
3374         return 0;
3375
3376 failed:
3377         usb_scuttle_anchored_urbs(&data->deferred);
3378 done:
3379         spin_lock_irq(&data->txlock);
3380         clear_bit(BTUSB_SUSPENDING, &data->flags);
3381         spin_unlock_irq(&data->txlock);
3382
3383         return err;
3384 }
3385 #endif
3386
3387 static struct usb_driver btusb_driver = {
3388         .name           = "btusb",
3389         .probe          = btusb_probe,
3390         .disconnect     = btusb_disconnect,
3391 #ifdef CONFIG_PM
3392         .suspend        = btusb_suspend,
3393         .resume         = btusb_resume,
3394 #endif
3395         .id_table       = btusb_table,
3396         .supports_autosuspend = 1,
3397         .disable_hub_initiated_lpm = 1,
3398 };
3399
3400 module_usb_driver(btusb_driver);
3401
3402 module_param(disable_scofix, bool, 0644);
3403 MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
3404
3405 module_param(force_scofix, bool, 0644);
3406 MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
3407
3408 module_param(reset, bool, 0644);
3409 MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
3410
3411 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
3412 MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION);
3413 MODULE_VERSION(VERSION);
3414 MODULE_LICENSE("GPL");