drivers/ata/ahci_brcm.c

   1 /*
   2  * Broadcom SATA3 AHCI Controller Driver
   3  *
   4  * Copyright © 2009-2015 Broadcom Corporation
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2, or (at your option)
   9  * any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  */
  16
  17 #include <linux/ahci_platform.h>
  18 #include <linux/compiler.h>
  19 #include <linux/device.h>
  20 #include <linux/init.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/io.h>
  23 #include <linux/kernel.h>
  24 #include <linux/libata.h>
  25 #include <linux/module.h>
  26 #include <linux/of.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/reset.h>
  29 #include <linux/string.h>
  30
  31 #include "ahci.h"
  32
  33 #define DRV_NAME                                        "brcm-ahci"
  34
  35 #define SATA_TOP_CTRL_VERSION                           0x0
  36 #define SATA_TOP_CTRL_BUS_CTRL                          0x4
  37  #define MMIO_ENDIAN_SHIFT                              0 /* CPU->AHCI */
  38  #define DMADESC_ENDIAN_SHIFT                           2 /* AHCI->DDR */
  39  #define DMADATA_ENDIAN_SHIFT                           4 /* AHCI->DDR */
  40  #define PIODATA_ENDIAN_SHIFT                           6
  41   #define ENDIAN_SWAP_NONE                              0
  42   #define ENDIAN_SWAP_FULL                              2
  43 #define SATA_TOP_CTRL_TP_CTRL                           0x8
  44 #define SATA_TOP_CTRL_PHY_CTRL                          0xc
  45  #define SATA_TOP_CTRL_PHY_CTRL_1                       0x0
  46   #define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE       BIT(14)
  47  #define SATA_TOP_CTRL_PHY_CTRL_2                       0x4
  48   #define SATA_TOP_CTRL_2_SW_RST_MDIOREG                BIT(0)
  49   #define SATA_TOP_CTRL_2_SW_RST_OOB                    BIT(1)
  50   #define SATA_TOP_CTRL_2_SW_RST_RX                     BIT(2)
  51   #define SATA_TOP_CTRL_2_SW_RST_TX                     BIT(3)
  52   #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET              BIT(14)
  53  #define SATA_TOP_CTRL_PHY_OFFS                         0x8
  54  #define SATA_TOP_MAX_PHYS                              2
  55
  56 #define SATA_FIRST_PORT_CTRL                            0x700
  57 #define SATA_NEXT_PORT_CTRL_OFFSET                      0x80
  58 #define SATA_PORT_PCTRL6(reg_base)                      (reg_base + 0x18)
  59
  60 /* On big-endian MIPS, buses are reversed to big endian, so switch them back */
  61 #if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
  62 #define DATA_ENDIAN                      2 /* AHCI->DDR inbound accesses */
  63 #define MMIO_ENDIAN                      2 /* CPU->AHCI outbound accesses */
  64 #else
  65 #define DATA_ENDIAN                      0
  66 #define MMIO_ENDIAN                      0
  67 #endif
  68
  69 #define BUS_CTRL_ENDIAN_CONF                            \
  70         ((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) |        \
  71         (DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) |         \
  72         (MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
  73
  74 #define BUS_CTRL_ENDIAN_NSP_CONF                        \
  75         (0x02 << DMADATA_ENDIAN_SHIFT | 0x02 << DMADESC_ENDIAN_SHIFT)
  76
  77 #define BUS_CTRL_ENDIAN_CONF_MASK                       \
  78         (0x3 << MMIO_ENDIAN_SHIFT | 0x3 << DMADESC_ENDIAN_SHIFT |       \
  79          0x3 << DMADATA_ENDIAN_SHIFT | 0x3 << PIODATA_ENDIAN_SHIFT)
  80
  81 enum brcm_ahci_version {
  82         BRCM_SATA_BCM7425 = 1,
  83         BRCM_SATA_BCM7445,
  84         BRCM_SATA_NSP,
  85 };
  86
  87 enum brcm_ahci_quirks {
  88         BRCM_AHCI_QUIRK_NO_NCQ          = BIT(0),
  89         BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(1),
  90 };
  91
  92 struct brcm_ahci_priv {
  93         struct device *dev;
  94         void __iomem *top_ctrl;
  95         u32 port_mask;
  96         u32 quirks;
  97         enum brcm_ahci_version version;
  98         struct reset_control *rcdev;
  99 };
 100
 101 static inline u32 brcm_sata_readreg(void __iomem *addr)
 102 {
 103         /*
 104          * MIPS endianness is configured by boot strap, which also reverses all
 105          * bus endianness (i.e., big-endian CPU + big endian bus ==> native
 106          * endian I/O).
 107          *
 108          * Other architectures (e.g., ARM) either do not support big endian, or
 109          * else leave I/O in little endian mode.
 110          */
 111         if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 112                 return __raw_readl(addr);
 113         else
 114                 return readl_relaxed(addr);
 115 }
 116
 117 static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
 118 {
 119         /* See brcm_sata_readreg() comments */
 120         if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 121                 __raw_writel(val, addr);
 122         else
 123                 writel_relaxed(val, addr);
 124 }
 125
 126 static void brcm_sata_alpm_init(struct ahci_host_priv *hpriv)
 127 {
 128         struct brcm_ahci_priv *priv = hpriv->plat_data;
 129         u32 port_ctrl, host_caps;
 130         int i;
 131
 132         /* Enable support for ALPM */
 133         host_caps = readl(hpriv->mmio + HOST_CAP);
 134         if (!(host_caps & HOST_CAP_ALPM))
 135                 hpriv->flags |= AHCI_HFLAG_YES_ALPM;
 136
 137         /*
 138          * Adjust timeout to allow PLL sufficient time to lock while waking
 139          * up from slumber mode.
 140          */
 141         for (i = 0, port_ctrl = SATA_FIRST_PORT_CTRL;
 142              i < SATA_TOP_MAX_PHYS;
 143              i++, port_ctrl += SATA_NEXT_PORT_CTRL_OFFSET) {
 144                 if (priv->port_mask & BIT(i))
 145                         writel(0xff1003fc,
 146                                hpriv->mmio + SATA_PORT_PCTRL6(port_ctrl));
 147         }
 148 }
 149
 150 static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
 151 {
 152         void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
 153                                 (port * SATA_TOP_CTRL_PHY_OFFS);
 154         void __iomem *p;
 155         u32 reg;
 156
 157         if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
 158                 return;
 159
 160         /* clear PHY_DEFAULT_POWER_STATE */
 161         p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
 162         reg = brcm_sata_readreg(p);
 163         reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
 164         brcm_sata_writereg(reg, p);
 165
 166         /* reset the PHY digital logic */
 167         p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
 168         reg = brcm_sata_readreg(p);
 169         reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
 170                  SATA_TOP_CTRL_2_SW_RST_RX);
 171         reg |= SATA_TOP_CTRL_2_SW_RST_TX;
 172         brcm_sata_writereg(reg, p);
 173         reg = brcm_sata_readreg(p);
 174         reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
 175         brcm_sata_writereg(reg, p);
 176         reg = brcm_sata_readreg(p);
 177         reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
 178         brcm_sata_writereg(reg, p);
 179         (void)brcm_sata_readreg(p);
 180 }
 181
 182 static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
 183 {
 184         void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
 185                                 (port * SATA_TOP_CTRL_PHY_OFFS);
 186         void __iomem *p;
 187         u32 reg;
 188
 189         if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
 190                 return;
 191
 192         /* power-off the PHY digital logic */
 193         p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
 194         reg = brcm_sata_readreg(p);
 195         reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
 196                 SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX |
 197                 SATA_TOP_CTRL_2_PHY_GLOBAL_RESET);
 198         brcm_sata_writereg(reg, p);
 199
 200         /* set PHY_DEFAULT_POWER_STATE */
 201         p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
 202         reg = brcm_sata_readreg(p);
 203         reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
 204         brcm_sata_writereg(reg, p);
 205 }
 206
 207 static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv)
 208 {
 209         int i;
 210
 211         for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
 212                 if (priv->port_mask & BIT(i))
 213                         brcm_sata_phy_enable(priv, i);
 214 }
 215
 216 static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
 217 {
 218         int i;
 219
 220         for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
 221                 if (priv->port_mask & BIT(i))
 222                         brcm_sata_phy_disable(priv, i);
 223 }
 224
 225 static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
 226                                   struct brcm_ahci_priv *priv)
 227 {
 228         void __iomem *ahci;
 229         struct resource *res;
 230         u32 impl;
 231
 232         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
 233         ahci = devm_ioremap_resource(&pdev->dev, res);
 234         if (IS_ERR(ahci))
 235                 return 0;
 236
 237         impl = readl(ahci + HOST_PORTS_IMPL);
 238
 239         if (fls(impl) > SATA_TOP_MAX_PHYS)
 240                 dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
 241                          impl);
 242         else if (!impl)
 243                 dev_info(priv->dev, "no ports found\n");
 244
 245         devm_iounmap(&pdev->dev, ahci);
 246         devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
 247
 248         return impl;
 249 }
 250
 251 static void brcm_sata_init(struct brcm_ahci_priv *priv)
 252 {
 253         void __iomem *ctrl = priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL;
 254         u32 data;
 255
 256         /* Configure endianness */
 257         data = brcm_sata_readreg(ctrl);
 258         data &= ~BUS_CTRL_ENDIAN_CONF_MASK;
 259         if (priv->version == BRCM_SATA_NSP)
 260                 data |= BUS_CTRL_ENDIAN_NSP_CONF;
 261         else
 262                 data |= BUS_CTRL_ENDIAN_CONF;
 263         brcm_sata_writereg(data, ctrl);
 264 }
 265
 266 static unsigned int brcm_ahci_read_id(struct ata_device *dev,
 267                                       struct ata_taskfile *tf, u16 *id)
 268 {
 269         struct ata_port *ap = dev->link->ap;
 270         struct ata_host *host = ap->host;
 271         struct ahci_host_priv *hpriv = host->private_data;
 272         struct brcm_ahci_priv *priv = hpriv->plat_data;
 273         void __iomem *mmio = hpriv->mmio;
 274         unsigned int err_mask;
 275         unsigned long flags;
 276         int i, rc;
 277         u32 ctl;
 278
 279         /* Try to read the device ID and, if this fails, proceed with the
 280          * recovery sequence below
 281          */
 282         err_mask = ata_do_dev_read_id(dev, tf, id);
 283         if (likely(!err_mask))
 284                 return err_mask;
 285
 286         /* Disable host interrupts */
 287         spin_lock_irqsave(&host->lock, flags);
 288         ctl = readl(mmio + HOST_CTL);
 289         ctl &= ~HOST_IRQ_EN;
 290         writel(ctl, mmio + HOST_CTL);
 291         readl(mmio + HOST_CTL); /* flush */
 292         spin_unlock_irqrestore(&host->lock, flags);
 293
 294         /* Perform the SATA PHY reset sequence */
 295         brcm_sata_phy_disable(priv, ap->port_no);
 296
 297         /* Bring the PHY back on */
 298         brcm_sata_phy_enable(priv, ap->port_no);
 299
 300         /* Re-initialize and calibrate the PHY */
 301         for (i = 0; i < hpriv->nports; i++) {
 302                 rc = phy_init(hpriv->phys[i]);
 303                 if (rc)
 304                         goto disable_phys;
 305
 306                 rc = phy_calibrate(hpriv->phys[i]);
 307                 if (rc) {
 308                         phy_exit(hpriv->phys[i]);
 309                         goto disable_phys;
 310                 }
 311         }
 312
 313         /* Re-enable host interrupts */
 314         spin_lock_irqsave(&host->lock, flags);
 315         ctl = readl(mmio + HOST_CTL);
 316         ctl |= HOST_IRQ_EN;
 317         writel(ctl, mmio + HOST_CTL);
 318         readl(mmio + HOST_CTL); /* flush */
 319         spin_unlock_irqrestore(&host->lock, flags);
 320
 321         return ata_do_dev_read_id(dev, tf, id);
 322
 323 disable_phys:
 324         while (--i >= 0) {
 325                 phy_power_off(hpriv->phys[i]);
 326                 phy_exit(hpriv->phys[i]);
 327         }
 328
 329         return AC_ERR_OTHER;
 330 }
 331
 332 static void brcm_ahci_host_stop(struct ata_host *host)
 333 {
 334         struct ahci_host_priv *hpriv = host->private_data;
 335
 336         ahci_platform_disable_resources(hpriv);
 337 }
 338
 339 static struct ata_port_operations ahci_brcm_platform_ops = {
 340         .inherits       = &ahci_ops,
 341         .host_stop      = brcm_ahci_host_stop,
 342         .read_id        = brcm_ahci_read_id,
 343 };
 344
 345 static const struct ata_port_info ahci_brcm_port_info = {
 346         .flags          = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
 347         .link_flags     = ATA_LFLAG_NO_DB_DELAY,
 348         .pio_mask       = ATA_PIO4,
 349         .udma_mask      = ATA_UDMA6,
 350         .port_ops       = &ahci_brcm_platform_ops,
 351 };
 352
 353 #ifdef CONFIG_PM_SLEEP
 354 static int brcm_ahci_suspend(struct device *dev)
 355 {
 356         struct ata_host *host = dev_get_drvdata(dev);
 357         struct ahci_host_priv *hpriv = host->private_data;
 358         struct brcm_ahci_priv *priv = hpriv->plat_data;
 359         int ret;
 360
 361         ret = ahci_platform_suspend(dev);
 362         brcm_sata_phys_disable(priv);
 363         return ret;
 364 }
 365
 366 static int brcm_ahci_resume(struct device *dev)
 367 {
 368         struct ata_host *host = dev_get_drvdata(dev);
 369         struct ahci_host_priv *hpriv = host->private_data;
 370         struct brcm_ahci_priv *priv = hpriv->plat_data;
 371
 372         brcm_sata_init(priv);
 373         brcm_sata_phys_enable(priv);
 374         brcm_sata_alpm_init(hpriv);
 375         return ahci_platform_resume(dev);
 376 }
 377 #endif
 378
 379 static struct scsi_host_template ahci_platform_sht = {
 380         AHCI_SHT(DRV_NAME),
 381 };
 382
 383 static const struct of_device_id ahci_of_match[] = {
 384         {.compatible = "brcm,bcm7425-ahci", .data = (void *)BRCM_SATA_BCM7425},
 385         {.compatible = "brcm,bcm7445-ahci", .data = (void *)BRCM_SATA_BCM7445},
 386         {.compatible = "brcm,bcm63138-ahci", .data = (void *)BRCM_SATA_BCM7445},
 387         {.compatible = "brcm,bcm-nsp-ahci", .data = (void *)BRCM_SATA_NSP},
 388         {},
 389 };
 390 MODULE_DEVICE_TABLE(of, ahci_of_match);
 391
 392 static int brcm_ahci_probe(struct platform_device *pdev)
 393 {
 394         const struct of_device_id *of_id;
 395         struct device *dev = &pdev->dev;
 396         struct brcm_ahci_priv *priv;
 397         struct ahci_host_priv *hpriv;
 398         struct resource *res;
 399         int ret;
 400
 401         priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 402         if (!priv)
 403                 return -ENOMEM;
 404
 405         of_id = of_match_node(ahci_of_match, pdev->dev.of_node);
 406         if (!of_id)
 407                 return -ENODEV;
 408
 409         priv->version = (enum brcm_ahci_version)of_id->data;
 410         priv->dev = dev;
 411
 412         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
 413         priv->top_ctrl = devm_ioremap_resource(dev, res);
 414         if (IS_ERR(priv->top_ctrl))
 415                 return PTR_ERR(priv->top_ctrl);
 416
 417         /* Reset is optional depending on platform */
 418         priv->rcdev = devm_reset_control_get(&pdev->dev, "ahci");
 419         if (!IS_ERR_OR_NULL(priv->rcdev))
 420                 reset_control_deassert(priv->rcdev);
 421
 422         if ((priv->version == BRCM_SATA_BCM7425) ||
 423                 (priv->version == BRCM_SATA_NSP)) {
 424                 priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
 425                 priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
 426         }
 427
 428         brcm_sata_init(priv);
 429
 430         priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
 431         if (!priv->port_mask)
 432                 return -ENODEV;
 433
 434         brcm_sata_phys_enable(priv);
 435
 436         hpriv = ahci_platform_get_resources(pdev, 0);
 437         if (IS_ERR(hpriv))
 438                 return PTR_ERR(hpriv);
 439         hpriv->plat_data = priv;
 440         hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP;
 441
 442         brcm_sata_alpm_init(hpriv);
 443
 444         ret = ahci_platform_enable_resources(hpriv);
 445         if (ret)
 446                 return ret;
 447
 448         if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
 449                 hpriv->flags |= AHCI_HFLAG_NO_NCQ;
 450         hpriv->flags |= AHCI_HFLAG_NO_WRITE_TO_RO;
 451
 452         ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
 453                                       &ahci_platform_sht);
 454         if (ret)
 455                 return ret;
 456
 457         dev_info(dev, "Broadcom AHCI SATA3 registered\n");
 458
 459         return 0;
 460 }
 461
 462 static int brcm_ahci_remove(struct platform_device *pdev)
 463 {
 464         struct ata_host *host = dev_get_drvdata(&pdev->dev);
 465         struct ahci_host_priv *hpriv = host->private_data;
 466         struct brcm_ahci_priv *priv = hpriv->plat_data;
 467         int ret;
 468
 469         ret = ata_platform_remove_one(pdev);
 470         if (ret)
 471                 return ret;
 472
 473         brcm_sata_phys_disable(priv);
 474
 475         return 0;
 476 }
 477
 478 static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
 479
 480 static struct platform_driver brcm_ahci_driver = {
 481         .probe = brcm_ahci_probe,
 482         .remove = brcm_ahci_remove,
 483         .driver = {
 484                 .name = DRV_NAME,
 485                 .of_match_table = ahci_of_match,
 486                 .pm = &ahci_brcm_pm_ops,
 487         },
 488 };
 489 module_platform_driver(brcm_ahci_driver);
 490
 491 MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
 492 MODULE_AUTHOR("Brian Norris");
 493 MODULE_LICENSE("GPL");
 494 MODULE_ALIAS("platform:sata-brcmstb");