drivers/ata/ahci_brcm.c

   1 /*
   2  * Broadcom SATA3 AHCI Controller Driver
   3  *
   4  * Copyright © 2009-2015 Broadcom Corporation
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2, or (at your option)
   9  * any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  */
  16
  17 #include <linux/ahci_platform.h>
  18 #include <linux/compiler.h>
  19 #include <linux/device.h>
  20 #include <linux/init.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/io.h>
  23 #include <linux/kernel.h>
  24 #include <linux/libata.h>
  25 #include <linux/module.h>
  26 #include <linux/of.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/string.h>
  29
  30 #include "ahci.h"
  31
  32 #define DRV_NAME                                        "brcm-ahci"
  33
  34 #define SATA_TOP_CTRL_VERSION                           0x0
  35 #define SATA_TOP_CTRL_BUS_CTRL                          0x4
  36  #define MMIO_ENDIAN_SHIFT                              0 /* CPU->AHCI */
  37  #define DMADESC_ENDIAN_SHIFT                           2 /* AHCI->DDR */
  38  #define DMADATA_ENDIAN_SHIFT                           4 /* AHCI->DDR */
  39  #define PIODATA_ENDIAN_SHIFT                           6
  40   #define ENDIAN_SWAP_NONE                              0
  41   #define ENDIAN_SWAP_FULL                              2
  42 #define SATA_TOP_CTRL_TP_CTRL                           0x8
  43 #define SATA_TOP_CTRL_PHY_CTRL                          0xc
  44  #define SATA_TOP_CTRL_PHY_CTRL_1                       0x0
  45   #define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE       BIT(14)
  46  #define SATA_TOP_CTRL_PHY_CTRL_2                       0x4
  47   #define SATA_TOP_CTRL_2_SW_RST_MDIOREG                BIT(0)
  48   #define SATA_TOP_CTRL_2_SW_RST_OOB                    BIT(1)
  49   #define SATA_TOP_CTRL_2_SW_RST_RX                     BIT(2)
  50   #define SATA_TOP_CTRL_2_SW_RST_TX                     BIT(3)
  51   #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET              BIT(14)
  52  #define SATA_TOP_CTRL_PHY_OFFS                         0x8
  53  #define SATA_TOP_MAX_PHYS                              2
  54
  55 #define SATA_FIRST_PORT_CTRL                            0x700
  56 #define SATA_NEXT_PORT_CTRL_OFFSET                      0x80
  57 #define SATA_PORT_PCTRL6(reg_base)                      (reg_base + 0x18)
  58
  59 /* On big-endian MIPS, buses are reversed to big endian, so switch them back */
  60 #if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
  61 #define DATA_ENDIAN                      2 /* AHCI->DDR inbound accesses */
  62 #define MMIO_ENDIAN                      2 /* CPU->AHCI outbound accesses */
  63 #else
  64 #define DATA_ENDIAN                      0
  65 #define MMIO_ENDIAN                      0
  66 #endif
  67
  68 #define BUS_CTRL_ENDIAN_CONF                            \
  69         ((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) |        \
  70         (DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) |         \
  71         (MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
  72
  73 #define BUS_CTRL_ENDIAN_NSP_CONF                        \
  74         (0x02 << DMADATA_ENDIAN_SHIFT | 0x02 << DMADESC_ENDIAN_SHIFT)
  75
  76 #define BUS_CTRL_ENDIAN_CONF_MASK                       \
  77         (0x3 << MMIO_ENDIAN_SHIFT | 0x3 << DMADESC_ENDIAN_SHIFT |       \
  78          0x3 << DMADATA_ENDIAN_SHIFT | 0x3 << PIODATA_ENDIAN_SHIFT)
  79
  80 enum brcm_ahci_version {
  81         BRCM_SATA_BCM7425 = 1,
  82         BRCM_SATA_BCM7445,
  83         BRCM_SATA_NSP,
  84 };
  85
  86 enum brcm_ahci_quirks {
  87         BRCM_AHCI_QUIRK_NO_NCQ          = BIT(0),
  88         BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(1),
  89 };
  90
  91 struct brcm_ahci_priv {
  92         struct device *dev;
  93         void __iomem *top_ctrl;
  94         u32 port_mask;
  95         u32 quirks;
  96         enum brcm_ahci_version version;
  97 };
  98
  99 static inline u32 brcm_sata_readreg(void __iomem *addr)
 100 {
 101         /*
 102          * MIPS endianness is configured by boot strap, which also reverses all
 103          * bus endianness (i.e., big-endian CPU + big endian bus ==> native
 104          * endian I/O).
 105          *
 106          * Other architectures (e.g., ARM) either do not support big endian, or
 107          * else leave I/O in little endian mode.
 108          */
 109         if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 110                 return __raw_readl(addr);
 111         else
 112                 return readl_relaxed(addr);
 113 }
 114
 115 static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
 116 {
 117         /* See brcm_sata_readreg() comments */
 118         if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 119                 __raw_writel(val, addr);
 120         else
 121                 writel_relaxed(val, addr);
 122 }
 123
 124 static void brcm_sata_alpm_init(struct ahci_host_priv *hpriv)
 125 {
 126         struct brcm_ahci_priv *priv = hpriv->plat_data;
 127         u32 port_ctrl, host_caps;
 128         int i;
 129
 130         /* Enable support for ALPM */
 131         host_caps = readl(hpriv->mmio + HOST_CAP);
 132         if (!(host_caps & HOST_CAP_ALPM))
 133                 hpriv->flags |= AHCI_HFLAG_YES_ALPM;
 134
 135         /*
 136          * Adjust timeout to allow PLL sufficient time to lock while waking
 137          * up from slumber mode.
 138          */
 139         for (i = 0, port_ctrl = SATA_FIRST_PORT_CTRL;
 140              i < SATA_TOP_MAX_PHYS;
 141              i++, port_ctrl += SATA_NEXT_PORT_CTRL_OFFSET) {
 142                 if (priv->port_mask & BIT(i))
 143                         writel(0xff1003fc,
 144                                hpriv->mmio + SATA_PORT_PCTRL6(port_ctrl));
 145         }
 146 }
 147
 148 static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
 149 {
 150         void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
 151                                 (port * SATA_TOP_CTRL_PHY_OFFS);
 152         void __iomem *p;
 153         u32 reg;
 154
 155         if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
 156                 return;
 157
 158         /* clear PHY_DEFAULT_POWER_STATE */
 159         p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
 160         reg = brcm_sata_readreg(p);
 161         reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
 162         brcm_sata_writereg(reg, p);
 163
 164         /* reset the PHY digital logic */
 165         p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
 166         reg = brcm_sata_readreg(p);
 167         reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
 168                  SATA_TOP_CTRL_2_SW_RST_RX);
 169         reg |= SATA_TOP_CTRL_2_SW_RST_TX;
 170         brcm_sata_writereg(reg, p);
 171         reg = brcm_sata_readreg(p);
 172         reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
 173         brcm_sata_writereg(reg, p);
 174         reg = brcm_sata_readreg(p);
 175         reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
 176         brcm_sata_writereg(reg, p);
 177         (void)brcm_sata_readreg(p);
 178 }
 179
 180 static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
 181 {
 182         void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
 183                                 (port * SATA_TOP_CTRL_PHY_OFFS);
 184         void __iomem *p;
 185         u32 reg;
 186
 187         if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
 188                 return;
 189
 190         /* power-off the PHY digital logic */
 191         p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
 192         reg = brcm_sata_readreg(p);
 193         reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
 194                 SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX |
 195                 SATA_TOP_CTRL_2_PHY_GLOBAL_RESET);
 196         brcm_sata_writereg(reg, p);
 197
 198         /* set PHY_DEFAULT_POWER_STATE */
 199         p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
 200         reg = brcm_sata_readreg(p);
 201         reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
 202         brcm_sata_writereg(reg, p);
 203 }
 204
 205 static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv)
 206 {
 207         int i;
 208
 209         for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
 210                 if (priv->port_mask & BIT(i))
 211                         brcm_sata_phy_enable(priv, i);
 212 }
 213
 214 static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
 215 {
 216         int i;
 217
 218         for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
 219                 if (priv->port_mask & BIT(i))
 220                         brcm_sata_phy_disable(priv, i);
 221 }
 222
 223 static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
 224                                   struct brcm_ahci_priv *priv)
 225 {
 226         void __iomem *ahci;
 227         struct resource *res;
 228         u32 impl;
 229
 230         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
 231         ahci = devm_ioremap_resource(&pdev->dev, res);
 232         if (IS_ERR(ahci))
 233                 return 0;
 234
 235         impl = readl(ahci + HOST_PORTS_IMPL);
 236
 237         if (fls(impl) > SATA_TOP_MAX_PHYS)
 238                 dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
 239                          impl);
 240         else if (!impl)
 241                 dev_info(priv->dev, "no ports found\n");
 242
 243         devm_iounmap(&pdev->dev, ahci);
 244         devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
 245
 246         return impl;
 247 }
 248
 249 static void brcm_sata_init(struct brcm_ahci_priv *priv)
 250 {
 251         void __iomem *ctrl = priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL;
 252         u32 data;
 253
 254         /* Configure endianness */
 255         data = brcm_sata_readreg(ctrl);
 256         data &= ~BUS_CTRL_ENDIAN_CONF_MASK;
 257         if (priv->version == BRCM_SATA_NSP)
 258                 data |= BUS_CTRL_ENDIAN_NSP_CONF;
 259         else
 260                 data |= BUS_CTRL_ENDIAN_CONF;
 261         brcm_sata_writereg(data, ctrl);
 262 }
 263
 264 static unsigned int brcm_ahci_read_id(struct ata_device *dev,
 265                                       struct ata_taskfile *tf, u16 *id)
 266 {
 267         struct ata_port *ap = dev->link->ap;
 268         struct ata_host *host = ap->host;
 269         struct ahci_host_priv *hpriv = host->private_data;
 270         struct brcm_ahci_priv *priv = hpriv->plat_data;
 271         void __iomem *mmio = hpriv->mmio;
 272         unsigned int err_mask;
 273         unsigned long flags;
 274         int i, rc;
 275         u32 ctl;
 276
 277         /* Try to read the device ID and, if this fails, proceed with the
 278          * recovery sequence below
 279          */
 280         err_mask = ata_do_dev_read_id(dev, tf, id);
 281         if (likely(!err_mask))
 282                 return err_mask;
 283
 284         /* Disable host interrupts */
 285         spin_lock_irqsave(&host->lock, flags);
 286         ctl = readl(mmio + HOST_CTL);
 287         ctl &= ~HOST_IRQ_EN;
 288         writel(ctl, mmio + HOST_CTL);
 289         readl(mmio + HOST_CTL); /* flush */
 290         spin_unlock_irqrestore(&host->lock, flags);
 291
 292         /* Perform the SATA PHY reset sequence */
 293         brcm_sata_phy_disable(priv, ap->port_no);
 294
 295         /* Bring the PHY back on */
 296         brcm_sata_phy_enable(priv, ap->port_no);
 297
 298         /* Re-initialize and calibrate the PHY */
 299         for (i = 0; i < hpriv->nports; i++) {
 300                 rc = phy_init(hpriv->phys[i]);
 301                 if (rc)
 302                         goto disable_phys;
 303
 304                 rc = phy_calibrate(hpriv->phys[i]);
 305                 if (rc) {
 306                         phy_exit(hpriv->phys[i]);
 307                         goto disable_phys;
 308                 }
 309         }
 310
 311         /* Re-enable host interrupts */
 312         spin_lock_irqsave(&host->lock, flags);
 313         ctl = readl(mmio + HOST_CTL);
 314         ctl |= HOST_IRQ_EN;
 315         writel(ctl, mmio + HOST_CTL);
 316         readl(mmio + HOST_CTL); /* flush */
 317         spin_unlock_irqrestore(&host->lock, flags);
 318
 319         return ata_do_dev_read_id(dev, tf, id);
 320
 321 disable_phys:
 322         while (--i >= 0) {
 323                 phy_power_off(hpriv->phys[i]);
 324                 phy_exit(hpriv->phys[i]);
 325         }
 326
 327         return AC_ERR_OTHER;
 328 }
 329
 330 static void brcm_ahci_host_stop(struct ata_host *host)
 331 {
 332         struct ahci_host_priv *hpriv = host->private_data;
 333
 334         ahci_platform_disable_resources(hpriv);
 335 }
 336
 337 static struct ata_port_operations ahci_brcm_platform_ops = {
 338         .inherits       = &ahci_ops,
 339         .host_stop      = brcm_ahci_host_stop,
 340         .read_id        = brcm_ahci_read_id,
 341 };
 342
 343 static const struct ata_port_info ahci_brcm_port_info = {
 344         .flags          = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
 345         .link_flags     = ATA_LFLAG_NO_DB_DELAY,
 346         .pio_mask       = ATA_PIO4,
 347         .udma_mask      = ATA_UDMA6,
 348         .port_ops       = &ahci_brcm_platform_ops,
 349 };
 350
 351 #ifdef CONFIG_PM_SLEEP
 352 static int brcm_ahci_suspend(struct device *dev)
 353 {
 354         struct ata_host *host = dev_get_drvdata(dev);
 355         struct ahci_host_priv *hpriv = host->private_data;
 356         struct brcm_ahci_priv *priv = hpriv->plat_data;
 357         int ret;
 358
 359         ret = ahci_platform_suspend(dev);
 360         brcm_sata_phys_disable(priv);
 361         return ret;
 362 }
 363
 364 static int brcm_ahci_resume(struct device *dev)
 365 {
 366         struct ata_host *host = dev_get_drvdata(dev);
 367         struct ahci_host_priv *hpriv = host->private_data;
 368         struct brcm_ahci_priv *priv = hpriv->plat_data;
 369
 370         brcm_sata_init(priv);
 371         brcm_sata_phys_enable(priv);
 372         brcm_sata_alpm_init(hpriv);
 373         return ahci_platform_resume(dev);
 374 }
 375 #endif
 376
 377 static struct scsi_host_template ahci_platform_sht = {
 378         AHCI_SHT(DRV_NAME),
 379 };
 380
 381 static const struct of_device_id ahci_of_match[] = {
 382         {.compatible = "brcm,bcm7425-ahci", .data = (void *)BRCM_SATA_BCM7425},
 383         {.compatible = "brcm,bcm7445-ahci", .data = (void *)BRCM_SATA_BCM7445},
 384         {.compatible = "brcm,bcm-nsp-ahci", .data = (void *)BRCM_SATA_NSP},
 385         {},
 386 };
 387 MODULE_DEVICE_TABLE(of, ahci_of_match);
 388
 389 static int brcm_ahci_probe(struct platform_device *pdev)
 390 {
 391         const struct of_device_id *of_id;
 392         struct device *dev = &pdev->dev;
 393         struct brcm_ahci_priv *priv;
 394         struct ahci_host_priv *hpriv;
 395         struct resource *res;
 396         int ret;
 397
 398         priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 399         if (!priv)
 400                 return -ENOMEM;
 401
 402         of_id = of_match_node(ahci_of_match, pdev->dev.of_node);
 403         if (!of_id)
 404                 return -ENODEV;
 405
 406         priv->version = (enum brcm_ahci_version)of_id->data;
 407         priv->dev = dev;
 408
 409         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
 410         priv->top_ctrl = devm_ioremap_resource(dev, res);
 411         if (IS_ERR(priv->top_ctrl))
 412                 return PTR_ERR(priv->top_ctrl);
 413
 414         if ((priv->version == BRCM_SATA_BCM7425) ||
 415                 (priv->version == BRCM_SATA_NSP)) {
 416                 priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
 417                 priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
 418         }
 419
 420         brcm_sata_init(priv);
 421
 422         priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
 423         if (!priv->port_mask)
 424                 return -ENODEV;
 425
 426         brcm_sata_phys_enable(priv);
 427
 428         hpriv = ahci_platform_get_resources(pdev);
 429         if (IS_ERR(hpriv))
 430                 return PTR_ERR(hpriv);
 431         hpriv->plat_data = priv;
 432         hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP;
 433
 434         brcm_sata_alpm_init(hpriv);
 435
 436         ret = ahci_platform_enable_resources(hpriv);
 437         if (ret)
 438                 return ret;
 439
 440         if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
 441                 hpriv->flags |= AHCI_HFLAG_NO_NCQ;
 442         hpriv->flags |= AHCI_HFLAG_NO_WRITE_TO_RO;
 443
 444         ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
 445                                       &ahci_platform_sht);
 446         if (ret)
 447                 return ret;
 448
 449         dev_info(dev, "Broadcom AHCI SATA3 registered\n");
 450
 451         return 0;
 452 }
 453
 454 static int brcm_ahci_remove(struct platform_device *pdev)
 455 {
 456         struct ata_host *host = dev_get_drvdata(&pdev->dev);
 457         struct ahci_host_priv *hpriv = host->private_data;
 458         struct brcm_ahci_priv *priv = hpriv->plat_data;
 459         int ret;
 460
 461         ret = ata_platform_remove_one(pdev);
 462         if (ret)
 463                 return ret;
 464
 465         brcm_sata_phys_disable(priv);
 466
 467         return 0;
 468 }
 469
 470 static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
 471
 472 static struct platform_driver brcm_ahci_driver = {
 473         .probe = brcm_ahci_probe,
 474         .remove = brcm_ahci_remove,
 475         .driver = {
 476                 .name = DRV_NAME,
 477                 .of_match_table = ahci_of_match,
 478                 .pm = &ahci_brcm_pm_ops,
 479         },
 480 };
 481 module_platform_driver(brcm_ahci_driver);
 482
 483 MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
 484 MODULE_AUTHOR("Brian Norris");
 485 MODULE_LICENSE("GPL");
 486 MODULE_ALIAS("platform:sata-brcmstb");