drivers/acpi/thermal.c

   1 /*
   2  *  acpi_thermal.c - ACPI Thermal Zone Driver ($Revision: 41 $)
   3  *
   4  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
   5  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
   6  *
   7  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   8  *
   9  *  This program is free software; you can redistribute it and/or modify
  10  *  it under the terms of the GNU General Public License as published by
  11  *  the Free Software Foundation; either version 2 of the License, or (at
  12  *  your option) any later version.
  13  *
  14  *  This program is distributed in the hope that it will be useful, but
  15  *  WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17  *  General Public License for more details.
  18  *
  19  *  You should have received a copy of the GNU General Public License along
  20  *  with this program; if not, write to the Free Software Foundation, Inc.,
  21  *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
  22  *
  23  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  24  *
  25  *  This driver fully implements the ACPI thermal policy as described in the
  26  *  ACPI 2.0 Specification.
  27  *
  28  *  TBD: 1. Implement passive cooling hysteresis.
  29  *       2. Enhance passive cooling (CPU) states/limit interface to support
  30  *          concepts of 'multiple limiters', upper/lower limits, etc.
  31  *
  32  */
  33
  34 #include <linux/kernel.h>
  35 #include <linux/module.h>
  36 #include <linux/dmi.h>
  37 #include <linux/init.h>
  38 #include <linux/types.h>
  39 #include <linux/proc_fs.h>
  40 #include <linux/timer.h>
  41 #include <linux/jiffies.h>
  42 #include <linux/kmod.h>
  43 #include <linux/seq_file.h>
  44 #include <linux/reboot.h>
  45 #include <asm/uaccess.h>
  46 #include <linux/thermal.h>
  47 #include <acpi/acpi_bus.h>
  48 #include <acpi/acpi_drivers.h>
  49
  50 #define ACPI_THERMAL_CLASS              "thermal_zone"
  51 #define ACPI_THERMAL_DEVICE_NAME        "Thermal Zone"
  52 #define ACPI_THERMAL_FILE_STATE         "state"
  53 #define ACPI_THERMAL_FILE_TEMPERATURE   "temperature"
  54 #define ACPI_THERMAL_FILE_TRIP_POINTS   "trip_points"
  55 #define ACPI_THERMAL_FILE_COOLING_MODE  "cooling_mode"
  56 #define ACPI_THERMAL_FILE_POLLING_FREQ  "polling_frequency"
  57 #define ACPI_THERMAL_NOTIFY_TEMPERATURE 0x80
  58 #define ACPI_THERMAL_NOTIFY_THRESHOLDS  0x81
  59 #define ACPI_THERMAL_NOTIFY_DEVICES     0x82
  60 #define ACPI_THERMAL_NOTIFY_CRITICAL    0xF0
  61 #define ACPI_THERMAL_NOTIFY_HOT         0xF1
  62 #define ACPI_THERMAL_MODE_ACTIVE        0x00
  63
  64 #define ACPI_THERMAL_MAX_ACTIVE 10
  65 #define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65
  66
  67 #define _COMPONENT              ACPI_THERMAL_COMPONENT
  68 ACPI_MODULE_NAME("thermal");
  69
  70 MODULE_AUTHOR("Paul Diefenbaugh");
  71 MODULE_DESCRIPTION("ACPI Thermal Zone Driver");
  72 MODULE_LICENSE("GPL");
  73
  74 static int act;
  75 module_param(act, int, 0644);
  76 MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.");
  77
  78 static int crt;
  79 module_param(crt, int, 0644);
  80 MODULE_PARM_DESC(crt, "Disable or lower all critical trip points.");
  81
  82 static int tzp;
  83 module_param(tzp, int, 0444);
  84 MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.");
  85
  86 static int nocrt;
  87 module_param(nocrt, int, 0);
  88 MODULE_PARM_DESC(nocrt, "Set to take no action upon ACPI thermal zone critical trips points.");
  89
  90 static int off;
  91 module_param(off, int, 0);
  92 MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.");
  93
  94 static int psv;
  95 module_param(psv, int, 0644);
  96 MODULE_PARM_DESC(psv, "Disable or override all passive trip points.");
  97
  98 static int acpi_thermal_add(struct acpi_device *device);
  99 static int acpi_thermal_remove(struct acpi_device *device, int type);
 100 static int acpi_thermal_resume(struct acpi_device *device);
 101 static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file);
 102 static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file);
 103 static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file);
 104 static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file);
 105 static ssize_t acpi_thermal_write_cooling_mode(struct file *,
 106                                                const char __user *, size_t,
 107                                                loff_t *);
 108 static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file);
 109 static ssize_t acpi_thermal_write_polling(struct file *, const char __user *,
 110                                           size_t, loff_t *);
 111
 112 static const struct acpi_device_id  thermal_device_ids[] = {
 113         {ACPI_THERMAL_HID, 0},
 114         {"", 0},
 115 };
 116 MODULE_DEVICE_TABLE(acpi, thermal_device_ids);
 117
 118 static struct acpi_driver acpi_thermal_driver = {
 119         .name = "thermal",
 120         .class = ACPI_THERMAL_CLASS,
 121         .ids = thermal_device_ids,
 122         .ops = {
 123                 .add = acpi_thermal_add,
 124                 .remove = acpi_thermal_remove,
 125                 .resume = acpi_thermal_resume,
 126                 },
 127 };
 128
 129 struct acpi_thermal_state {
 130         u8 critical:1;
 131         u8 hot:1;
 132         u8 passive:1;
 133         u8 active:1;
 134         u8 reserved:4;
 135         int active_index;
 136 };
 137
 138 struct acpi_thermal_state_flags {
 139         u8 valid:1;
 140         u8 enabled:1;
 141         u8 reserved:6;
 142 };
 143
 144 struct acpi_thermal_critical {
 145         struct acpi_thermal_state_flags flags;
 146         unsigned long temperature;
 147 };
 148
 149 struct acpi_thermal_hot {
 150         struct acpi_thermal_state_flags flags;
 151         unsigned long temperature;
 152 };
 153
 154 struct acpi_thermal_passive {
 155         struct acpi_thermal_state_flags flags;
 156         unsigned long temperature;
 157         unsigned long tc1;
 158         unsigned long tc2;
 159         unsigned long tsp;
 160         struct acpi_handle_list devices;
 161 };
 162
 163 struct acpi_thermal_active {
 164         struct acpi_thermal_state_flags flags;
 165         unsigned long temperature;
 166         struct acpi_handle_list devices;
 167 };
 168
 169 struct acpi_thermal_trips {
 170         struct acpi_thermal_critical critical;
 171         struct acpi_thermal_hot hot;
 172         struct acpi_thermal_passive passive;
 173         struct acpi_thermal_active active[ACPI_THERMAL_MAX_ACTIVE];
 174 };
 175
 176 struct acpi_thermal_flags {
 177         u8 cooling_mode:1;      /* _SCP */
 178         u8 devices:1;           /* _TZD */
 179         u8 reserved:6;
 180 };
 181
 182 struct acpi_thermal {
 183         struct acpi_device * device;
 184         acpi_bus_id name;
 185         unsigned long temperature;
 186         unsigned long last_temperature;
 187         unsigned long polling_frequency;
 188         volatile u8 zombie;
 189         struct acpi_thermal_flags flags;
 190         struct acpi_thermal_state state;
 191         struct acpi_thermal_trips trips;
 192         struct acpi_handle_list devices;
 193         struct timer_list timer;
 194         struct thermal_zone_device *thermal_zone;
 195         int tz_enabled;
 196         struct mutex lock;
 197 };
 198
 199 static const struct file_operations acpi_thermal_state_fops = {
 200         .owner = THIS_MODULE,
 201         .open = acpi_thermal_state_open_fs,
 202         .read = seq_read,
 203         .llseek = seq_lseek,
 204         .release = single_release,
 205 };
 206
 207 static const struct file_operations acpi_thermal_temp_fops = {
 208         .owner = THIS_MODULE,
 209         .open = acpi_thermal_temp_open_fs,
 210         .read = seq_read,
 211         .llseek = seq_lseek,
 212         .release = single_release,
 213 };
 214
 215 static const struct file_operations acpi_thermal_trip_fops = {
 216         .owner = THIS_MODULE,
 217         .open = acpi_thermal_trip_open_fs,
 218         .read = seq_read,
 219         .llseek = seq_lseek,
 220         .release = single_release,
 221 };
 222
 223 static const struct file_operations acpi_thermal_cooling_fops = {
 224         .owner = THIS_MODULE,
 225         .open = acpi_thermal_cooling_open_fs,
 226         .read = seq_read,
 227         .write = acpi_thermal_write_cooling_mode,
 228         .llseek = seq_lseek,
 229         .release = single_release,
 230 };
 231
 232 static const struct file_operations acpi_thermal_polling_fops = {
 233         .owner = THIS_MODULE,
 234         .open = acpi_thermal_polling_open_fs,
 235         .read = seq_read,
 236         .write = acpi_thermal_write_polling,
 237         .llseek = seq_lseek,
 238         .release = single_release,
 239 };
 240
 241 /* --------------------------------------------------------------------------
 242                              Thermal Zone Management
 243    -------------------------------------------------------------------------- */
 244
 245 static int acpi_thermal_get_temperature(struct acpi_thermal *tz)
 246 {
 247         acpi_status status = AE_OK;
 248         unsigned long long tmp;
 249
 250         if (!tz)
 251                 return -EINVAL;
 252
 253         tz->last_temperature = tz->temperature;
 254
 255         status = acpi_evaluate_integer(tz->device->handle, "_TMP", NULL, &tmp);
 256         if (ACPI_FAILURE(status))
 257                 return -ENODEV;
 258
 259         tz->temperature = tmp;
 260         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Temperature is %lu dK\n",
 261                           tz->temperature));
 262
 263         return 0;
 264 }
 265
 266 static int acpi_thermal_get_polling_frequency(struct acpi_thermal *tz)
 267 {
 268         acpi_status status = AE_OK;
 269         unsigned long long tmp;
 270
 271         if (!tz)
 272                 return -EINVAL;
 273
 274         status = acpi_evaluate_integer(tz->device->handle, "_TZP", NULL, &tmp);
 275         if (ACPI_FAILURE(status))
 276                 return -ENODEV;
 277
 278         tz->polling_frequency = tmp;
 279         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Polling frequency is %lu dS\n",
 280                           tz->polling_frequency));
 281
 282         return 0;
 283 }
 284
 285 static int acpi_thermal_set_polling(struct acpi_thermal *tz, int seconds)
 286 {
 287
 288         if (!tz)
 289                 return -EINVAL;
 290
 291         tz->polling_frequency = seconds * 10;   /* Convert value to deci-seconds */
 292
 293         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 294                           "Polling frequency set to %lu seconds\n",
 295                           tz->polling_frequency/10));
 296
 297         return 0;
 298 }
 299
 300 static int acpi_thermal_set_cooling_mode(struct acpi_thermal *tz, int mode)
 301 {
 302         acpi_status status = AE_OK;
 303         union acpi_object arg0 = { ACPI_TYPE_INTEGER };
 304         struct acpi_object_list arg_list = { 1, &arg0 };
 305         acpi_handle handle = NULL;
 306
 307
 308         if (!tz)
 309                 return -EINVAL;
 310
 311         status = acpi_get_handle(tz->device->handle, "_SCP", &handle);
 312         if (ACPI_FAILURE(status)) {
 313                 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "_SCP not present\n"));
 314                 return -ENODEV;
 315         }
 316
 317         arg0.integer.value = mode;
 318
 319         status = acpi_evaluate_object(handle, NULL, &arg_list, NULL);
 320         if (ACPI_FAILURE(status))
 321                 return -ENODEV;
 322
 323         return 0;
 324 }
 325
 326 #define ACPI_TRIPS_CRITICAL     0x01
 327 #define ACPI_TRIPS_HOT          0x02
 328 #define ACPI_TRIPS_PASSIVE      0x04
 329 #define ACPI_TRIPS_ACTIVE       0x08
 330 #define ACPI_TRIPS_DEVICES      0x10
 331
 332 #define ACPI_TRIPS_REFRESH_THRESHOLDS   (ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
 333 #define ACPI_TRIPS_REFRESH_DEVICES      ACPI_TRIPS_DEVICES
 334
 335 #define ACPI_TRIPS_INIT      (ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT |    \
 336                               ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE |  \
 337                               ACPI_TRIPS_DEVICES)
 338
 339 /*
 340  * This exception is thrown out in two cases:
 341  * 1.An invalid trip point becomes invalid or a valid trip point becomes invalid
 342  *   when re-evaluating the AML code.
 343  * 2.TODO: Devices listed in _PSL, _ALx, _TZD may change.
 344  *   We need to re-bind the cooling devices of a thermal zone when this occurs.
 345  */
 346 #define ACPI_THERMAL_TRIPS_EXCEPTION(flags, str)        \
 347 do {    \
 348         if (flags != ACPI_TRIPS_INIT)   \
 349                 ACPI_EXCEPTION((AE_INFO, AE_ERROR,      \
 350                 "ACPI thermal trip point %s changed\n"  \
 351                 "Please send acpidump to linux-acpi@vger.kernel.org\n", str)); \
 352 } while (0)
 353
 354 static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 355 {
 356         acpi_status status = AE_OK;
 357         unsigned long long tmp;
 358         struct acpi_handle_list devices;
 359         int valid = 0;
 360         int i;
 361
 362         /* Critical Shutdown (required) */
 363         if (flag & ACPI_TRIPS_CRITICAL) {
 364                 status = acpi_evaluate_integer(tz->device->handle,
 365                                 "_CRT", NULL, &tmp);
 366                 tz->trips.critical.temperature = tmp;
 367                 /*
 368                  * Treat freezing temperatures as invalid as well; some
 369                  * BIOSes return really low values and cause reboots at startup.
 370                  * Below zero (Celsius) values clearly aren't right for sure..
 371                  * ... so lets discard those as invalid.
 372                  */
 373                 if (ACPI_FAILURE(status) ||
 374                                 tz->trips.critical.temperature <= 2732) {
 375                         tz->trips.critical.flags.valid = 0;
 376                         ACPI_EXCEPTION((AE_INFO, status,
 377                                         "No or invalid critical threshold"));
 378                         return -ENODEV;
 379                 } else {
 380                         tz->trips.critical.flags.valid = 1;
 381                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 382                                         "Found critical threshold [%lu]\n",
 383                                         tz->trips.critical.temperature));
 384                 }
 385                 if (tz->trips.critical.flags.valid == 1) {
 386                         if (crt == -1) {
 387                                 tz->trips.critical.flags.valid = 0;
 388                         } else if (crt > 0) {
 389                                 unsigned long crt_k = CELSIUS_TO_KELVIN(crt);
 390                                 /*
 391                                  * Allow override critical threshold
 392                                  */
 393                                 if (crt_k > tz->trips.critical.temperature)
 394                                         printk(KERN_WARNING PREFIX
 395                                                 "Critical threshold %d C\n", crt);
 396                                 tz->trips.critical.temperature = crt_k;
 397                         }
 398                 }
 399         }
 400
 401         /* Critical Sleep (optional) */
 402         if (flag & ACPI_TRIPS_HOT) {
 403                 status = acpi_evaluate_integer(tz->device->handle,
 404                                 "_HOT", NULL, &tmp);
 405                 if (ACPI_FAILURE(status)) {
 406                         tz->trips.hot.flags.valid = 0;
 407                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 408                                         "No hot threshold\n"));
 409                 } else {
 410                         tz->trips.hot.temperature = tmp;
 411                         tz->trips.hot.flags.valid = 1;
 412                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 413                                         "Found hot threshold [%lu]\n",
 414                                         tz->trips.critical.temperature));
 415                 }
 416         }
 417
 418         /* Passive (optional) */
 419         if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips.passive.flags.valid) ||
 420                 (flag == ACPI_TRIPS_INIT)) {
 421                 valid = tz->trips.passive.flags.valid;
 422                 if (psv == -1) {
 423                         status = AE_SUPPORT;
 424                 } else if (psv > 0) {
 425                         tmp = CELSIUS_TO_KELVIN(psv);
 426                         status = AE_OK;
 427                 } else {
 428                         status = acpi_evaluate_integer(tz->device->handle,
 429                                 "_PSV", NULL, &tmp);
 430                 }
 431
 432                 if (ACPI_FAILURE(status))
 433                         tz->trips.passive.flags.valid = 0;
 434                 else {
 435                         tz->trips.passive.temperature = tmp;
 436                         tz->trips.passive.flags.valid = 1;
 437                         if (flag == ACPI_TRIPS_INIT) {
 438                                 status = acpi_evaluate_integer(
 439                                                 tz->device->handle, "_TC1",
 440                                                 NULL, &tmp);
 441                                 if (ACPI_FAILURE(status))
 442                                         tz->trips.passive.flags.valid = 0;
 443                                 else
 444                                         tz->trips.passive.tc1 = tmp;
 445                                 status = acpi_evaluate_integer(
 446                                                 tz->device->handle, "_TC2",
 447                                                 NULL, &tmp);
 448                                 if (ACPI_FAILURE(status))
 449                                         tz->trips.passive.flags.valid = 0;
 450                                 else
 451                                         tz->trips.passive.tc2 = tmp;
 452                                 status = acpi_evaluate_integer(
 453                                                 tz->device->handle, "_TSP",
 454                                                 NULL, &tmp);
 455                                 if (ACPI_FAILURE(status))
 456                                         tz->trips.passive.flags.valid = 0;
 457                                 else
 458                                         tz->trips.passive.tsp = tmp;
 459                         }
 460                 }
 461         }
 462         if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.passive.flags.valid) {
 463                 memset(&devices, 0, sizeof(struct acpi_handle_list));
 464                 status = acpi_evaluate_reference(tz->device->handle, "_PSL",
 465                                                         NULL, &devices);
 466                 if (ACPI_FAILURE(status)) {
 467                         printk(KERN_WARNING PREFIX
 468                                 "Invalid passive threshold\n");
 469                         tz->trips.passive.flags.valid = 0;
 470                 }
 471                 else
 472                         tz->trips.passive.flags.valid = 1;
 473
 474                 if (memcmp(&tz->trips.passive.devices, &devices,
 475                                 sizeof(struct acpi_handle_list))) {
 476                         memcpy(&tz->trips.passive.devices, &devices,
 477                                 sizeof(struct acpi_handle_list));
 478                         ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
 479                 }
 480         }
 481         if ((flag & ACPI_TRIPS_PASSIVE) || (flag & ACPI_TRIPS_DEVICES)) {
 482                 if (valid != tz->trips.passive.flags.valid)
 483                                 ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
 484         }
 485
 486         /* Active (optional) */
 487         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
 488                 char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
 489                 valid = tz->trips.active[i].flags.valid;
 490
 491                 if (act == -1)
 492                         break; /* disable all active trip points */
 493
 494                 if ((flag == ACPI_TRIPS_INIT) || ((flag & ACPI_TRIPS_ACTIVE) &&
 495                         tz->trips.active[i].flags.valid)) {
 496                         status = acpi_evaluate_integer(tz->device->handle,
 497                                                         name, NULL, &tmp);
 498                         if (ACPI_FAILURE(status)) {
 499                                 tz->trips.active[i].flags.valid = 0;
 500                                 if (i == 0)
 501                                         break;
 502                                 if (act <= 0)
 503                                         break;
 504                                 if (i == 1)
 505                                         tz->trips.active[0].temperature =
 506                                                 CELSIUS_TO_KELVIN(act);
 507                                 else
 508                                         /*
 509                                          * Don't allow override higher than
 510                                          * the next higher trip point
 511                                          */
 512                                         tz->trips.active[i - 1].temperature =
 513                                                 (tz->trips.active[i - 2].temperature <
 514                                                 CELSIUS_TO_KELVIN(act) ?
 515                                                 tz->trips.active[i - 2].temperature :
 516                                                 CELSIUS_TO_KELVIN(act));
 517                                 break;
 518                         } else {
 519                                 tz->trips.active[i].temperature = tmp;
 520                                 tz->trips.active[i].flags.valid = 1;
 521                         }
 522                 }
 523
 524                 name[2] = 'L';
 525                 if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.active[i].flags.valid ) {
 526                         memset(&devices, 0, sizeof(struct acpi_handle_list));
 527                         status = acpi_evaluate_reference(tz->device->handle,
 528                                                 name, NULL, &devices);
 529                         if (ACPI_FAILURE(status)) {
 530                                 printk(KERN_WARNING PREFIX
 531                                         "Invalid active%d threshold\n", i);
 532                                 tz->trips.active[i].flags.valid = 0;
 533                         }
 534                         else
 535                                 tz->trips.active[i].flags.valid = 1;
 536
 537                         if (memcmp(&tz->trips.active[i].devices, &devices,
 538                                         sizeof(struct acpi_handle_list))) {
 539                                 memcpy(&tz->trips.active[i].devices, &devices,
 540                                         sizeof(struct acpi_handle_list));
 541                                 ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
 542                         }
 543                 }
 544                 if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES))
 545                         if (valid != tz->trips.active[i].flags.valid)
 546                                 ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
 547
 548                 if (!tz->trips.active[i].flags.valid)
 549                         break;
 550         }
 551
 552         if (flag & ACPI_TRIPS_DEVICES) {
 553                 memset(&devices, 0, sizeof(struct acpi_handle_list));
 554                 status = acpi_evaluate_reference(tz->device->handle, "_TZD",
 555                                                 NULL, &devices);
 556                 if (memcmp(&tz->devices, &devices,
 557                                 sizeof(struct acpi_handle_list))) {
 558                         memcpy(&tz->devices, &devices,
 559                                 sizeof(struct acpi_handle_list));
 560                         ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
 561                 }
 562         }
 563
 564         return 0;
 565 }
 566
 567 static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 568 {
 569         return acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
 570 }
 571
 572 static int acpi_thermal_critical(struct acpi_thermal *tz)
 573 {
 574         if (!tz || !tz->trips.critical.flags.valid)
 575                 return -EINVAL;
 576
 577         if (tz->temperature >= tz->trips.critical.temperature) {
 578                 printk(KERN_WARNING PREFIX "Critical trip point\n");
 579                 tz->trips.critical.flags.enabled = 1;
 580         } else if (tz->trips.critical.flags.enabled)
 581                 tz->trips.critical.flags.enabled = 0;
 582
 583         acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL,
 584                                 tz->trips.critical.flags.enabled);
 585         acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
 586                                           dev_name(&tz->device->dev),
 587                                           ACPI_THERMAL_NOTIFY_CRITICAL,
 588                                           tz->trips.critical.flags.enabled);
 589
 590         /* take no action if nocrt is set */
 591         if(!nocrt) {
 592                 printk(KERN_EMERG
 593                         "Critical temperature reached (%ld C), shutting down.\n",
 594                         KELVIN_TO_CELSIUS(tz->temperature));
 595                 orderly_poweroff(true);
 596         }
 597
 598         return 0;
 599 }
 600
 601 static int acpi_thermal_hot(struct acpi_thermal *tz)
 602 {
 603         if (!tz || !tz->trips.hot.flags.valid)
 604                 return -EINVAL;
 605
 606         if (tz->temperature >= tz->trips.hot.temperature) {
 607                 printk(KERN_WARNING PREFIX "Hot trip point\n");
 608                 tz->trips.hot.flags.enabled = 1;
 609         } else if (tz->trips.hot.flags.enabled)
 610                 tz->trips.hot.flags.enabled = 0;
 611
 612         acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT,
 613                                 tz->trips.hot.flags.enabled);
 614         acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
 615                                           dev_name(&tz->device->dev),
 616                                           ACPI_THERMAL_NOTIFY_HOT,
 617                                           tz->trips.hot.flags.enabled);
 618
 619         /* TBD: Call user-mode "sleep(S4)" function if nocrt is cleared */
 620
 621         return 0;
 622 }
 623
 624 static void acpi_thermal_passive(struct acpi_thermal *tz)
 625 {
 626         int result = 1;
 627         struct acpi_thermal_passive *passive = NULL;
 628         int trend = 0;
 629         int i = 0;
 630
 631
 632         if (!tz || !tz->trips.passive.flags.valid)
 633                 return;
 634
 635         passive = &(tz->trips.passive);
 636
 637         /*
 638          * Above Trip?
 639          * -----------
 640          * Calculate the thermal trend (using the passive cooling equation)
 641          * and modify the performance limit for all passive cooling devices
 642          * accordingly.  Note that we assume symmetry.
 643          */
 644         if (tz->temperature >= passive->temperature) {
 645                 trend =
 646                     (passive->tc1 * (tz->temperature - tz->last_temperature)) +
 647                     (passive->tc2 * (tz->temperature - passive->temperature));
 648                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 649                                   "trend[%d]=(tc1[%lu]*(tmp[%lu]-last[%lu]))+(tc2[%lu]*(tmp[%lu]-psv[%lu]))\n",
 650                                   trend, passive->tc1, tz->temperature,
 651                                   tz->last_temperature, passive->tc2,
 652                                   tz->temperature, passive->temperature));
 653                 passive->flags.enabled = 1;
 654                 /* Heating up? */
 655                 if (trend > 0)
 656                         for (i = 0; i < passive->devices.count; i++)
 657                                 acpi_processor_set_thermal_limit(passive->
 658                                                                  devices.
 659                                                                  handles[i],
 660                                                                  ACPI_PROCESSOR_LIMIT_INCREMENT);
 661                 /* Cooling off? */
 662                 else if (trend < 0) {
 663                         for (i = 0; i < passive->devices.count; i++)
 664                                 /*
 665                                  * assume that we are on highest
 666                                  * freq/lowest thrott and can leave
 667                                  * passive mode, even in error case
 668                                  */
 669                                 if (!acpi_processor_set_thermal_limit
 670                                     (passive->devices.handles[i],
 671                                      ACPI_PROCESSOR_LIMIT_DECREMENT))
 672                                         result = 0;
 673                         /*
 674                          * Leave cooling mode, even if the temp might
 675                          * higher than trip point This is because some
 676                          * machines might have long thermal polling
 677                          * frequencies (tsp) defined. We will fall back
 678                          * into passive mode in next cycle (probably quicker)
 679                          */
 680                         if (result) {
 681                                 passive->flags.enabled = 0;
 682                                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 683                                                   "Disabling passive cooling, still above threshold,"
 684                                                   " but we are cooling down\n"));
 685                         }
 686                 }
 687                 return;
 688         }
 689
 690         /*
 691          * Below Trip?
 692          * -----------
 693          * Implement passive cooling hysteresis to slowly increase performance
 694          * and avoid thrashing around the passive trip point.  Note that we
 695          * assume symmetry.
 696          */
 697         if (!passive->flags.enabled)
 698                 return;
 699         for (i = 0; i < passive->devices.count; i++)
 700                 if (!acpi_processor_set_thermal_limit
 701                     (passive->devices.handles[i],
 702                      ACPI_PROCESSOR_LIMIT_DECREMENT))
 703                         result = 0;
 704         if (result) {
 705                 passive->flags.enabled = 0;
 706                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 707                                   "Disabling passive cooling (zone is cool)\n"));
 708         }
 709 }
 710
 711 static void acpi_thermal_active(struct acpi_thermal *tz)
 712 {
 713         int result = 0;
 714         struct acpi_thermal_active *active = NULL;
 715         int i = 0;
 716         int j = 0;
 717         unsigned long maxtemp = 0;
 718
 719
 720         if (!tz)
 721                 return;
 722
 723         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
 724                 active = &(tz->trips.active[i]);
 725                 if (!active || !active->flags.valid)
 726                         break;
 727                 if (tz->temperature >= active->temperature) {
 728                         /*
 729                          * Above Threshold?
 730                          * ----------------
 731                          * If not already enabled, turn ON all cooling devices
 732                          * associated with this active threshold.
 733                          */
 734                         if (active->temperature > maxtemp)
 735                                 tz->state.active_index = i;
 736                         maxtemp = active->temperature;
 737                         if (active->flags.enabled)
 738                                 continue;
 739                         for (j = 0; j < active->devices.count; j++) {
 740                                 result =
 741                                     acpi_bus_set_power(active->devices.
 742                                                        handles[j],
 743                                                        ACPI_STATE_D0);
 744                                 if (result) {
 745                                         printk(KERN_WARNING PREFIX
 746                                                       "Unable to turn cooling device [%p] 'on'\n",
 747                                                       active->devices.
 748                                                       handles[j]);
 749                                         continue;
 750                                 }
 751                                 active->flags.enabled = 1;
 752                                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 753                                                   "Cooling device [%p] now 'on'\n",
 754                                                   active->devices.handles[j]));
 755                         }
 756                         continue;
 757                 }
 758                 if (!active->flags.enabled)
 759                         continue;
 760                 /*
 761                  * Below Threshold?
 762                  * ----------------
 763                  * Turn OFF all cooling devices associated with this
 764                  * threshold.
 765                  */
 766                 for (j = 0; j < active->devices.count; j++) {
 767                         result = acpi_bus_set_power(active->devices.handles[j],
 768                                                     ACPI_STATE_D3);
 769                         if (result) {
 770                                 printk(KERN_WARNING PREFIX
 771                                               "Unable to turn cooling device [%p] 'off'\n",
 772                                               active->devices.handles[j]);
 773                                 continue;
 774                         }
 775                         active->flags.enabled = 0;
 776                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 777                                           "Cooling device [%p] now 'off'\n",
 778                                           active->devices.handles[j]));
 779                 }
 780         }
 781 }
 782
 783 static void acpi_thermal_check(void *context);
 784
 785 static void acpi_thermal_run(unsigned long data)
 786 {
 787         struct acpi_thermal *tz = (struct acpi_thermal *)data;
 788         if (!tz->zombie)
 789                 acpi_os_execute(OSL_GPE_HANDLER, acpi_thermal_check, (void *)data);
 790 }
 791
 792 static void acpi_thermal_active_off(void *data)
 793 {
 794         int result = 0;
 795         struct acpi_thermal *tz = data;
 796         int i = 0;
 797         int j = 0;
 798         struct acpi_thermal_active *active = NULL;
 799
 800         if (!tz) {
 801                 printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
 802                 return;
 803         }
 804
 805         result = acpi_thermal_get_temperature(tz);
 806         if (result)
 807                 return;
 808
 809         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
 810                 active = &(tz->trips.active[i]);
 811                 if (!active || !active->flags.valid)
 812                         break;
 813                 if (tz->temperature >= active->temperature) {
 814                         /*
 815                          * If the thermal temperature is greater than the
 816                          * active threshod, unnecessary to turn off the
 817                          * the active cooling device.
 818                          */
 819                         continue;
 820                 }
 821                 /*
 822                  * Below Threshold?
 823                  * ----------------
 824                  * Turn OFF all cooling devices associated with this
 825                  * threshold.
 826                  */
 827                 for (j = 0; j < active->devices.count; j++)
 828                         result = acpi_bus_set_power(active->devices.handles[j],
 829                                                     ACPI_STATE_D3);
 830         }
 831 }
 832
 833 static void acpi_thermal_check(void *data)
 834 {
 835         int result = 0;
 836         struct acpi_thermal *tz = data;
 837         unsigned long sleep_time = 0;
 838         unsigned long timeout_jiffies = 0;
 839         int i = 0;
 840         struct acpi_thermal_state state;
 841
 842
 843         if (!tz) {
 844                 printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
 845                 return;
 846         }
 847
 848         /* Check if someone else is already running */
 849         if (!mutex_trylock(&tz->lock))
 850                 return;
 851
 852         state = tz->state;
 853
 854         result = acpi_thermal_get_temperature(tz);
 855         if (result)
 856                 goto unlock;
 857
 858         if (!tz->tz_enabled)
 859                 goto unlock;
 860
 861         memset(&tz->state, 0, sizeof(tz->state));
 862
 863         /*
 864          * Check Trip Points
 865          * -----------------
 866          * Compare the current temperature to the trip point values to see
 867          * if we've entered one of the thermal policy states.  Note that
 868          * this function determines when a state is entered, but the
 869          * individual policy decides when it is exited (e.g. hysteresis).
 870          */
 871         if (tz->trips.critical.flags.valid)
 872                 state.critical |=
 873                     (tz->temperature >= tz->trips.critical.temperature);
 874         if (tz->trips.hot.flags.valid)
 875                 state.hot |= (tz->temperature >= tz->trips.hot.temperature);
 876         if (tz->trips.passive.flags.valid)
 877                 state.passive |=
 878                     (tz->temperature >= tz->trips.passive.temperature);
 879         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
 880                 if (tz->trips.active[i].flags.valid)
 881                         state.active |=
 882                             (tz->temperature >=
 883                              tz->trips.active[i].temperature);
 884
 885         /*
 886          * Invoke Policy
 887          * -------------
 888          * Separated from the above check to allow individual policy to
 889          * determine when to exit a given state.
 890          */
 891         if (state.critical)
 892                 acpi_thermal_critical(tz);
 893         if (state.hot)
 894                 acpi_thermal_hot(tz);
 895         if (state.passive)
 896                 acpi_thermal_passive(tz);
 897         if (state.active)
 898                 acpi_thermal_active(tz);
 899
 900         /*
 901          * Calculate State
 902          * ---------------
 903          * Again, separated from the above two to allow independent policy
 904          * decisions.
 905          */
 906         tz->state.critical = tz->trips.critical.flags.enabled;
 907         tz->state.hot = tz->trips.hot.flags.enabled;
 908         tz->state.passive = tz->trips.passive.flags.enabled;
 909         tz->state.active = 0;
 910         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
 911                 tz->state.active |= tz->trips.active[i].flags.enabled;
 912
 913         /*
 914          * Calculate Sleep Time
 915          * --------------------
 916          * If we're in the passive state, use _TSP's value.  Otherwise
 917          * use the default polling frequency (e.g. _TZP).  If no polling
 918          * frequency is specified then we'll wait forever (at least until
 919          * a thermal event occurs).  Note that _TSP and _TZD values are
 920          * given in 1/10th seconds (we must covert to milliseconds).
 921          */
 922         if (tz->state.passive) {
 923                 sleep_time = tz->trips.passive.tsp * 100;
 924                 timeout_jiffies =  jiffies + (HZ * sleep_time) / 1000;
 925         } else if (tz->polling_frequency > 0) {
 926                 sleep_time = tz->polling_frequency * 100;
 927                 timeout_jiffies =  round_jiffies(jiffies + (HZ * sleep_time) / 1000);
 928         }
 929
 930         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s: temperature[%lu] sleep[%lu]\n",
 931                           tz->name, tz->temperature, sleep_time));
 932
 933         /*
 934          * Schedule Next Poll
 935          * ------------------
 936          */
 937         if (!sleep_time) {
 938                 if (timer_pending(&(tz->timer)))
 939                         del_timer(&(tz->timer));
 940         } else {
 941                 if (timer_pending(&(tz->timer)))
 942                         mod_timer(&(tz->timer), timeout_jiffies);
 943                 else {
 944                         tz->timer.data = (unsigned long)tz;
 945                         tz->timer.function = acpi_thermal_run;
 946                         tz->timer.expires = timeout_jiffies;
 947                         add_timer(&(tz->timer));
 948                 }
 949         }
 950       unlock:
 951         mutex_unlock(&tz->lock);
 952 }
 953
 954 /* sys I/F for generic thermal sysfs support */
 955 #define KELVIN_TO_MILLICELSIUS(t) (t * 100 - 273200)
 956
 957 static int thermal_get_temp(struct thermal_zone_device *thermal, char *buf)
 958 {
 959         struct acpi_thermal *tz = thermal->devdata;
 960         int result;
 961
 962         if (!tz)
 963                 return -EINVAL;
 964
 965         result = acpi_thermal_get_temperature(tz);
 966         if (result)
 967                 return result;
 968
 969         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(tz->temperature));
 970 }
 971
 972 static const char enabled[] = "kernel";
 973 static const char disabled[] = "user";
 974 static int thermal_get_mode(struct thermal_zone_device *thermal,
 975                                 char *buf)
 976 {
 977         struct acpi_thermal *tz = thermal->devdata;
 978
 979         if (!tz)
 980                 return -EINVAL;
 981
 982         return sprintf(buf, "%s\n", tz->tz_enabled ?
 983                         enabled : disabled);
 984 }
 985
 986 static int thermal_set_mode(struct thermal_zone_device *thermal,
 987                                 const char *buf)
 988 {
 989         struct acpi_thermal *tz = thermal->devdata;
 990         int enable;
 991
 992         if (!tz)
 993                 return -EINVAL;
 994
 995         /*
 996          * enable/disable thermal management from ACPI thermal driver
 997          */
 998         if (!strncmp(buf, enabled, sizeof enabled - 1))
 999                 enable = 1;
1000         else if (!strncmp(buf, disabled, sizeof disabled - 1))
1001                 enable = 0;
1002         else
1003                 return -EINVAL;
1004
1005         if (enable != tz->tz_enabled) {
1006                 tz->tz_enabled = enable;
1007                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
1008                         "%s ACPI thermal control\n",
1009                         tz->tz_enabled ? enabled : disabled));
1010                 acpi_thermal_check(tz);
1011         }
1012         return 0;
1013 }
1014
1015 static int thermal_get_trip_type(struct thermal_zone_device *thermal,
1016                                  int trip, char *buf)
1017 {
1018         struct acpi_thermal *tz = thermal->devdata;
1019         int i;
1020
1021         if (!tz || trip < 0)
1022                 return -EINVAL;
1023
1024         if (tz->trips.critical.flags.valid) {
1025                 if (!trip)
1026                         return sprintf(buf, "critical\n");
1027                 trip--;
1028         }
1029
1030         if (tz->trips.hot.flags.valid) {
1031                 if (!trip)
1032                         return sprintf(buf, "hot\n");
1033                 trip--;
1034         }
1035
1036         if (tz->trips.passive.flags.valid) {
1037                 if (!trip)
1038                         return sprintf(buf, "passive\n");
1039                 trip--;
1040         }
1041
1042         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
1043                 tz->trips.active[i].flags.valid; i++) {
1044                 if (!trip)
1045                         return sprintf(buf, "active%d\n", i);
1046                 trip--;
1047         }
1048
1049         return -EINVAL;
1050 }
1051
1052 static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
1053                                  int trip, char *buf)
1054 {
1055         struct acpi_thermal *tz = thermal->devdata;
1056         int i;
1057
1058         if (!tz || trip < 0)
1059                 return -EINVAL;
1060
1061         if (tz->trips.critical.flags.valid) {
1062                 if (!trip)
1063                         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
1064                                 tz->trips.critical.temperature));
1065                 trip--;
1066         }
1067
1068         if (tz->trips.hot.flags.valid) {
1069                 if (!trip)
1070                         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
1071                                         tz->trips.hot.temperature));
1072                 trip--;
1073         }
1074
1075         if (tz->trips.passive.flags.valid) {
1076                 if (!trip)
1077                         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
1078                                         tz->trips.passive.temperature));
1079                 trip--;
1080         }
1081
1082         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
1083                 tz->trips.active[i].flags.valid; i++) {
1084                 if (!trip)
1085                         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
1086                                         tz->trips.active[i].temperature));
1087                 trip--;
1088         }
1089
1090         return -EINVAL;
1091 }
1092
1093 static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
1094                                 unsigned long *temperature) {
1095         struct acpi_thermal *tz = thermal->devdata;
1096
1097         if (tz->trips.critical.flags.valid) {
1098                 *temperature = KELVIN_TO_MILLICELSIUS(
1099                                 tz->trips.critical.temperature);
1100                 return 0;
1101         } else
1102                 return -EINVAL;
1103 }
1104
1105 typedef int (*cb)(struct thermal_zone_device *, int,
1106                   struct thermal_cooling_device *);
1107 static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
1108                                         struct thermal_cooling_device *cdev,
1109                                         cb action)
1110 {
1111         struct acpi_device *device = cdev->devdata;
1112         struct acpi_thermal *tz = thermal->devdata;
1113         struct acpi_device *dev;
1114         acpi_status status;
1115         acpi_handle handle;
1116         int i;
1117         int j;
1118         int trip = -1;
1119         int result = 0;
1120
1121         if (tz->trips.critical.flags.valid)
1122                 trip++;
1123
1124         if (tz->trips.hot.flags.valid)
1125                 trip++;
1126
1127         if (tz->trips.passive.flags.valid) {
1128                 trip++;
1129                 for (i = 0; i < tz->trips.passive.devices.count;
1130                     i++) {
1131                         handle = tz->trips.passive.devices.handles[i];
1132                         status = acpi_bus_get_device(handle, &dev);
1133                         if (ACPI_SUCCESS(status) && (dev == device)) {
1134                                 result = action(thermal, trip, cdev);
1135                                 if (result)
1136                                         goto failed;
1137                         }
1138                 }
1139         }
1140
1141         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
1142                 if (!tz->trips.active[i].flags.valid)
1143                         break;
1144                 trip++;
1145                 for (j = 0;
1146                     j < tz->trips.active[i].devices.count;
1147                     j++) {
1148                         handle = tz->trips.active[i].devices.handles[j];
1149                         status = acpi_bus_get_device(handle, &dev);
1150                         if (ACPI_SUCCESS(status) && (dev == device)) {
1151                                 result = action(thermal, trip, cdev);
1152                                 if (result)
1153                                         goto failed;
1154                         }
1155                 }
1156         }
1157
1158         for (i = 0; i < tz->devices.count; i++) {
1159                 handle = tz->devices.handles[i];
1160                 status = acpi_bus_get_device(handle, &dev);
1161                 if (ACPI_SUCCESS(status) && (dev == device)) {
1162                         result = action(thermal, -1, cdev);
1163                         if (result)
1164                                 goto failed;
1165                 }
1166         }
1167
1168 failed:
1169         return result;
1170 }
1171
1172 static int
1173 acpi_thermal_bind_cooling_device(struct thermal_zone_device *thermal,
1174                                         struct thermal_cooling_device *cdev)
1175 {
1176         return acpi_thermal_cooling_device_cb(thermal, cdev,
1177                                 thermal_zone_bind_cooling_device);
1178 }
1179
1180 static int
1181 acpi_thermal_unbind_cooling_device(struct thermal_zone_device *thermal,
1182                                         struct thermal_cooling_device *cdev)
1183 {
1184         return acpi_thermal_cooling_device_cb(thermal, cdev,
1185                                 thermal_zone_unbind_cooling_device);
1186 }
1187
1188 static struct thermal_zone_device_ops acpi_thermal_zone_ops = {
1189         .bind = acpi_thermal_bind_cooling_device,
1190         .unbind = acpi_thermal_unbind_cooling_device,
1191         .get_temp = thermal_get_temp,
1192         .get_mode = thermal_get_mode,
1193         .set_mode = thermal_set_mode,
1194         .get_trip_type = thermal_get_trip_type,
1195         .get_trip_temp = thermal_get_trip_temp,
1196         .get_crit_temp = thermal_get_crit_temp,
1197 };
1198
1199 static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
1200 {
1201         int trips = 0;
1202         int result;
1203         acpi_status status;
1204         int i;
1205
1206         if (tz->trips.critical.flags.valid)
1207                 trips++;
1208
1209         if (tz->trips.hot.flags.valid)
1210                 trips++;
1211
1212         if (tz->trips.passive.flags.valid)
1213                 trips++;
1214
1215         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
1216                         tz->trips.active[i].flags.valid; i++, trips++);
1217         tz->thermal_zone = thermal_zone_device_register("acpitz",
1218                                         trips, tz, &acpi_thermal_zone_ops);
1219         if (IS_ERR(tz->thermal_zone))
1220                 return -ENODEV;
1221
1222         result = sysfs_create_link(&tz->device->dev.kobj,
1223                                    &tz->thermal_zone->device.kobj, "thermal_zone");
1224         if (result)
1225                 return result;
1226
1227         result = sysfs_create_link(&tz->thermal_zone->device.kobj,
1228                                    &tz->device->dev.kobj, "device");
1229         if (result)
1230                 return result;
1231
1232         status = acpi_attach_data(tz->device->handle,
1233                                   acpi_bus_private_data_handler,
1234                                   tz->thermal_zone);
1235         if (ACPI_FAILURE(status)) {
1236                 printk(KERN_ERR PREFIX
1237                                 "Error attaching device data\n");
1238                 return -ENODEV;
1239         }
1240
1241         tz->tz_enabled = 1;
1242
1243         dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
1244                  tz->thermal_zone->id);
1245         return 0;
1246 }
1247
1248 static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz)
1249 {
1250         sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
1251         sysfs_remove_link(&tz->thermal_zone->device.kobj, "device");
1252         thermal_zone_device_unregister(tz->thermal_zone);
1253         tz->thermal_zone = NULL;
1254         acpi_detach_data(tz->device->handle, acpi_bus_private_data_handler);
1255 }
1256
1257
1258 /* --------------------------------------------------------------------------
1259                               FS Interface (/proc)
1260    -------------------------------------------------------------------------- */
1261
1262 static struct proc_dir_entry *acpi_thermal_dir;
1263
1264 static int acpi_thermal_state_seq_show(struct seq_file *seq, void *offset)
1265 {
1266         struct acpi_thermal *tz = seq->private;
1267
1268
1269         if (!tz)
1270                 goto end;
1271
1272         seq_puts(seq, "state:                   ");
1273
1274         if (!tz->state.critical && !tz->state.hot && !tz->state.passive
1275             && !tz->state.active)
1276                 seq_puts(seq, "ok\n");
1277         else {
1278                 if (tz->state.critical)
1279                         seq_puts(seq, "critical ");
1280                 if (tz->state.hot)
1281                         seq_puts(seq, "hot ");
1282                 if (tz->state.passive)
1283                         seq_puts(seq, "passive ");
1284                 if (tz->state.active)
1285                         seq_printf(seq, "active[%d]", tz->state.active_index);
1286                 seq_puts(seq, "\n");
1287         }
1288
1289       end:
1290         return 0;
1291 }
1292
1293 static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file)
1294 {
1295         return single_open(file, acpi_thermal_state_seq_show, PDE(inode)->data);
1296 }
1297
1298 static int acpi_thermal_temp_seq_show(struct seq_file *seq, void *offset)
1299 {
1300         int result = 0;
1301         struct acpi_thermal *tz = seq->private;
1302
1303
1304         if (!tz)
1305                 goto end;
1306
1307         result = acpi_thermal_get_temperature(tz);
1308         if (result)
1309                 goto end;
1310
1311         seq_printf(seq, "temperature:             %ld C\n",
1312                    KELVIN_TO_CELSIUS(tz->temperature));
1313
1314       end:
1315         return 0;
1316 }
1317
1318 static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file)
1319 {
1320         return single_open(file, acpi_thermal_temp_seq_show, PDE(inode)->data);
1321 }
1322
1323 static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset)
1324 {
1325         struct acpi_thermal *tz = seq->private;
1326         struct acpi_device *device;
1327         acpi_status status;
1328
1329         int i = 0;
1330         int j = 0;
1331
1332
1333         if (!tz)
1334                 goto end;
1335
1336         if (tz->trips.critical.flags.valid)
1337                 seq_printf(seq, "critical (S5):           %ld C%s",
1338                            KELVIN_TO_CELSIUS(tz->trips.critical.temperature),
1339                            nocrt ? " <disabled>\n" : "\n");
1340
1341         if (tz->trips.hot.flags.valid)
1342                 seq_printf(seq, "hot (S4):                %ld C%s",
1343                            KELVIN_TO_CELSIUS(tz->trips.hot.temperature),
1344                            nocrt ? " <disabled>\n" : "\n");
1345
1346         if (tz->trips.passive.flags.valid) {
1347                 seq_printf(seq,
1348                            "passive:                 %ld C: tc1=%lu tc2=%lu tsp=%lu devices=",
1349                            KELVIN_TO_CELSIUS(tz->trips.passive.temperature),
1350                            tz->trips.passive.tc1, tz->trips.passive.tc2,
1351                            tz->trips.passive.tsp);
1352                 for (j = 0; j < tz->trips.passive.devices.count; j++) {
1353                         status = acpi_bus_get_device(tz->trips.passive.devices.
1354                                                      handles[j], &device);
1355                         seq_printf(seq, "%4.4s ", status ? "" :
1356                                    acpi_device_bid(device));
1357                 }
1358                 seq_puts(seq, "\n");
1359         }
1360
1361         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
1362                 if (!(tz->trips.active[i].flags.valid))
1363                         break;
1364                 seq_printf(seq, "active[%d]:               %ld C: devices=",
1365                            i,
1366                            KELVIN_TO_CELSIUS(tz->trips.active[i].temperature));
1367                 for (j = 0; j < tz->trips.active[i].devices.count; j++){
1368                         status = acpi_bus_get_device(tz->trips.active[i].
1369                                                      devices.handles[j],
1370                                                      &device);
1371                         seq_printf(seq, "%4.4s ", status ? "" :
1372                                    acpi_device_bid(device));
1373                 }
1374                 seq_puts(seq, "\n");
1375         }
1376
1377       end:
1378         return 0;
1379 }
1380
1381 static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file)
1382 {
1383         return single_open(file, acpi_thermal_trip_seq_show, PDE(inode)->data);
1384 }
1385
1386 static int acpi_thermal_cooling_seq_show(struct seq_file *seq, void *offset)
1387 {
1388         struct acpi_thermal *tz = seq->private;
1389
1390
1391         if (!tz)
1392                 goto end;
1393
1394         if (!tz->flags.cooling_mode)
1395                 seq_puts(seq, "<setting not supported>\n");
1396         else
1397                 seq_puts(seq, "0 - Active; 1 - Passive\n");
1398
1399       end:
1400         return 0;
1401 }
1402
1403 static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file)
1404 {
1405         return single_open(file, acpi_thermal_cooling_seq_show,
1406                            PDE(inode)->data);
1407 }
1408
1409 static ssize_t
1410 acpi_thermal_write_cooling_mode(struct file *file,
1411                                 const char __user * buffer,
1412                                 size_t count, loff_t * ppos)
1413 {
1414         struct seq_file *m = file->private_data;
1415         struct acpi_thermal *tz = m->private;
1416         int result = 0;
1417         char mode_string[12] = { '\0' };
1418
1419
1420         if (!tz || (count > sizeof(mode_string) - 1))
1421                 return -EINVAL;
1422
1423         if (!tz->flags.cooling_mode)
1424                 return -ENODEV;
1425
1426         if (copy_from_user(mode_string, buffer, count))
1427                 return -EFAULT;
1428
1429         mode_string[count] = '\0';
1430
1431         result = acpi_thermal_set_cooling_mode(tz,
1432                                                simple_strtoul(mode_string, NULL,
1433                                                               0));
1434         if (result)
1435                 return result;
1436
1437         acpi_thermal_check(tz);
1438
1439         return count;
1440 }
1441
1442 static int acpi_thermal_polling_seq_show(struct seq_file *seq, void *offset)
1443 {
1444         struct acpi_thermal *tz = seq->private;
1445
1446
1447         if (!tz)
1448                 goto end;
1449
1450         if (!tz->polling_frequency) {
1451                 seq_puts(seq, "<polling disabled>\n");
1452                 goto end;
1453         }
1454
1455         seq_printf(seq, "polling frequency:       %lu seconds\n",
1456                    (tz->polling_frequency / 10));
1457
1458       end:
1459         return 0;
1460 }
1461
1462 static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file)
1463 {
1464         return single_open(file, acpi_thermal_polling_seq_show,
1465                            PDE(inode)->data);
1466 }
1467
1468 static ssize_t
1469 acpi_thermal_write_polling(struct file *file,
1470                            const char __user * buffer,
1471                            size_t count, loff_t * ppos)
1472 {
1473         struct seq_file *m = file->private_data;
1474         struct acpi_thermal *tz = m->private;
1475         int result = 0;
1476         char polling_string[12] = { '\0' };
1477         int seconds = 0;
1478
1479
1480         if (!tz || (count > sizeof(polling_string) - 1))
1481                 return -EINVAL;
1482
1483         if (copy_from_user(polling_string, buffer, count))
1484                 return -EFAULT;
1485
1486         polling_string[count] = '\0';
1487
1488         seconds = simple_strtoul(polling_string, NULL, 0);
1489
1490         result = acpi_thermal_set_polling(tz, seconds);
1491         if (result)
1492                 return result;
1493
1494         acpi_thermal_check(tz);
1495
1496         return count;
1497 }
1498
1499 static int acpi_thermal_add_fs(struct acpi_device *device)
1500 {
1501         struct proc_dir_entry *entry = NULL;
1502
1503
1504         if (!acpi_device_dir(device)) {
1505                 acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
1506                                                      acpi_thermal_dir);
1507                 if (!acpi_device_dir(device))
1508                         return -ENODEV;
1509         }
1510
1511         /* 'state' [R] */
1512         entry = proc_create_data(ACPI_THERMAL_FILE_STATE,
1513                                  S_IRUGO, acpi_device_dir(device),
1514                                  &acpi_thermal_state_fops,
1515                                  acpi_driver_data(device));
1516         if (!entry)
1517                 return -ENODEV;
1518
1519         /* 'temperature' [R] */
1520         entry = proc_create_data(ACPI_THERMAL_FILE_TEMPERATURE,
1521                                  S_IRUGO, acpi_device_dir(device),
1522                                  &acpi_thermal_temp_fops,
1523                                  acpi_driver_data(device));
1524         if (!entry)
1525                 return -ENODEV;
1526
1527         /* 'trip_points' [R] */
1528         entry = proc_create_data(ACPI_THERMAL_FILE_TRIP_POINTS,
1529                                  S_IRUGO,
1530                                  acpi_device_dir(device),
1531                                  &acpi_thermal_trip_fops,
1532                                  acpi_driver_data(device));
1533         if (!entry)
1534                 return -ENODEV;
1535
1536         /* 'cooling_mode' [R/W] */
1537         entry = proc_create_data(ACPI_THERMAL_FILE_COOLING_MODE,
1538                                  S_IFREG | S_IRUGO | S_IWUSR,
1539                                  acpi_device_dir(device),
1540                                  &acpi_thermal_cooling_fops,
1541                                  acpi_driver_data(device));
1542         if (!entry)
1543                 return -ENODEV;
1544
1545         /* 'polling_frequency' [R/W] */
1546         entry = proc_create_data(ACPI_THERMAL_FILE_POLLING_FREQ,
1547                                  S_IFREG | S_IRUGO | S_IWUSR,
1548                                  acpi_device_dir(device),
1549                                  &acpi_thermal_polling_fops,
1550                                  acpi_driver_data(device));
1551         if (!entry)
1552                 return -ENODEV;
1553         return 0;
1554 }
1555
1556 static int acpi_thermal_remove_fs(struct acpi_device *device)
1557 {
1558
1559         if (acpi_device_dir(device)) {
1560                 remove_proc_entry(ACPI_THERMAL_FILE_POLLING_FREQ,
1561                                   acpi_device_dir(device));
1562                 remove_proc_entry(ACPI_THERMAL_FILE_COOLING_MODE,
1563                                   acpi_device_dir(device));
1564                 remove_proc_entry(ACPI_THERMAL_FILE_TRIP_POINTS,
1565                                   acpi_device_dir(device));
1566                 remove_proc_entry(ACPI_THERMAL_FILE_TEMPERATURE,
1567                                   acpi_device_dir(device));
1568                 remove_proc_entry(ACPI_THERMAL_FILE_STATE,
1569                                   acpi_device_dir(device));
1570                 remove_proc_entry(acpi_device_bid(device), acpi_thermal_dir);
1571                 acpi_device_dir(device) = NULL;
1572         }
1573
1574         return 0;
1575 }
1576
1577 /* --------------------------------------------------------------------------
1578                                  Driver Interface
1579    -------------------------------------------------------------------------- */
1580
1581 static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data)
1582 {
1583         struct acpi_thermal *tz = data;
1584         struct acpi_device *device = NULL;
1585
1586
1587         if (!tz)
1588                 return;
1589
1590         device = tz->device;
1591
1592         switch (event) {
1593         case ACPI_THERMAL_NOTIFY_TEMPERATURE:
1594                 acpi_thermal_check(tz);
1595                 break;
1596         case ACPI_THERMAL_NOTIFY_THRESHOLDS:
1597                 acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_THRESHOLDS);
1598                 acpi_thermal_check(tz);
1599                 acpi_bus_generate_proc_event(device, event, 0);
1600                 acpi_bus_generate_netlink_event(device->pnp.device_class,
1601                                                   dev_name(&device->dev), event, 0);
1602                 break;
1603         case ACPI_THERMAL_NOTIFY_DEVICES:
1604                 acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES);
1605                 acpi_thermal_check(tz);
1606                 acpi_bus_generate_proc_event(device, event, 0);
1607                 acpi_bus_generate_netlink_event(device->pnp.device_class,
1608                                                   dev_name(&device->dev), event, 0);
1609                 break;
1610         default:
1611                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
1612                                   "Unsupported event [0x%x]\n", event));
1613                 break;
1614         }
1615
1616         return;
1617 }
1618
1619 static int acpi_thermal_get_info(struct acpi_thermal *tz)
1620 {
1621         int result = 0;
1622
1623
1624         if (!tz)
1625                 return -EINVAL;
1626
1627         /* Get temperature [_TMP] (required) */
1628         result = acpi_thermal_get_temperature(tz);
1629         if (result)
1630                 return result;
1631
1632         /* Get trip points [_CRT, _PSV, etc.] (required) */
1633         result = acpi_thermal_get_trip_points(tz);
1634         if (result)
1635                 return result;
1636
1637         /* Set the cooling mode [_SCP] to active cooling (default) */
1638         result = acpi_thermal_set_cooling_mode(tz, ACPI_THERMAL_MODE_ACTIVE);
1639         if (!result)
1640                 tz->flags.cooling_mode = 1;
1641
1642         /* Get default polling frequency [_TZP] (optional) */
1643         if (tzp)
1644                 tz->polling_frequency = tzp;
1645         else
1646                 acpi_thermal_get_polling_frequency(tz);
1647
1648         return 0;
1649 }
1650
1651 static int acpi_thermal_add(struct acpi_device *device)
1652 {
1653         int result = 0;
1654         acpi_status status = AE_OK;
1655         struct acpi_thermal *tz = NULL;
1656
1657
1658         if (!device)
1659                 return -EINVAL;
1660
1661         tz = kzalloc(sizeof(struct acpi_thermal), GFP_KERNEL);
1662         if (!tz)
1663                 return -ENOMEM;
1664
1665         tz->device = device;
1666         strcpy(tz->name, device->pnp.bus_id);
1667         strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME);
1668         strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS);
1669         device->driver_data = tz;
1670         mutex_init(&tz->lock);
1671
1672
1673         result = acpi_thermal_get_info(tz);
1674         if (result)
1675                 goto free_memory;
1676
1677         result = acpi_thermal_register_thermal_zone(tz);
1678         if (result)
1679                 goto free_memory;
1680
1681         result = acpi_thermal_add_fs(device);
1682         if (result)
1683                 goto unregister_thermal_zone;
1684
1685         init_timer(&tz->timer);
1686
1687         acpi_thermal_active_off(tz);
1688
1689         acpi_thermal_check(tz);
1690
1691         status = acpi_install_notify_handler(device->handle,
1692                                              ACPI_DEVICE_NOTIFY,
1693                                              acpi_thermal_notify, tz);
1694         if (ACPI_FAILURE(status)) {
1695                 result = -ENODEV;
1696                 goto remove_fs;
1697         }
1698
1699         printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
1700                acpi_device_name(device), acpi_device_bid(device),
1701                KELVIN_TO_CELSIUS(tz->temperature));
1702         goto end;
1703
1704 remove_fs:
1705         acpi_thermal_remove_fs(device);
1706 unregister_thermal_zone:
1707         thermal_zone_device_unregister(tz->thermal_zone);
1708 free_memory:
1709         kfree(tz);
1710 end:
1711         return result;
1712 }
1713
1714 static int acpi_thermal_remove(struct acpi_device *device, int type)
1715 {
1716         acpi_status status = AE_OK;
1717         struct acpi_thermal *tz = NULL;
1718
1719
1720         if (!device || !acpi_driver_data(device))
1721                 return -EINVAL;
1722
1723         tz = acpi_driver_data(device);
1724
1725         /* avoid timer adding new defer task */
1726         tz->zombie = 1;
1727         /* wait for running timer (on other CPUs) finish */
1728         del_timer_sync(&(tz->timer));
1729         /* synchronize deferred task */
1730         acpi_os_wait_events_complete(NULL);
1731         /* deferred task may reinsert timer */
1732         del_timer_sync(&(tz->timer));
1733
1734         status = acpi_remove_notify_handler(device->handle,
1735                                             ACPI_DEVICE_NOTIFY,
1736                                             acpi_thermal_notify);
1737
1738         /* Terminate policy */
1739         if (tz->trips.passive.flags.valid && tz->trips.passive.flags.enabled) {
1740                 tz->trips.passive.flags.enabled = 0;
1741                 acpi_thermal_passive(tz);
1742         }
1743         if (tz->trips.active[0].flags.valid
1744             && tz->trips.active[0].flags.enabled) {
1745                 tz->trips.active[0].flags.enabled = 0;
1746                 acpi_thermal_active(tz);
1747         }
1748
1749         acpi_thermal_remove_fs(device);
1750         acpi_thermal_unregister_thermal_zone(tz);
1751         mutex_destroy(&tz->lock);
1752         kfree(tz);
1753         return 0;
1754 }
1755
1756 static int acpi_thermal_resume(struct acpi_device *device)
1757 {
1758         struct acpi_thermal *tz = NULL;
1759         int i, j, power_state, result;
1760
1761
1762         if (!device || !acpi_driver_data(device))
1763                 return -EINVAL;
1764
1765         tz = acpi_driver_data(device);
1766
1767         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
1768                 if (!(&tz->trips.active[i]))
1769                         break;
1770                 if (!tz->trips.active[i].flags.valid)
1771                         break;
1772                 tz->trips.active[i].flags.enabled = 1;
1773                 for (j = 0; j < tz->trips.active[i].devices.count; j++) {
1774                         result = acpi_bus_get_power(tz->trips.active[i].devices.
1775                             handles[j], &power_state);
1776                         if (result || (power_state != ACPI_STATE_D0)) {
1777                                 tz->trips.active[i].flags.enabled = 0;
1778                                 break;
1779                         }
1780                 }
1781                 tz->state.active |= tz->trips.active[i].flags.enabled;
1782         }
1783
1784         acpi_thermal_check(tz);
1785
1786         return AE_OK;
1787 }
1788
1789 static int thermal_act(const struct dmi_system_id *d) {
1790
1791         if (act == 0) {
1792                 printk(KERN_NOTICE "ACPI: %s detected: "
1793                         "disabling all active thermal trip points\n", d->ident);
1794                 act = -1;
1795         }
1796         return 0;
1797 }
1798 static int thermal_nocrt(const struct dmi_system_id *d) {
1799
1800         printk(KERN_NOTICE "ACPI: %s detected: "
1801                 "disabling all critical thermal trip point actions.\n", d->ident);
1802         nocrt = 1;
1803         return 0;
1804 }
1805 static int thermal_tzp(const struct dmi_system_id *d) {
1806
1807         if (tzp == 0) {
1808                 printk(KERN_NOTICE "ACPI: %s detected: "
1809                         "enabling thermal zone polling\n", d->ident);
1810                 tzp = 300;      /* 300 dS = 30 Seconds */
1811         }
1812         return 0;
1813 }
1814 static int thermal_psv(const struct dmi_system_id *d) {
1815
1816         if (psv == 0) {
1817                 printk(KERN_NOTICE "ACPI: %s detected: "
1818                         "disabling all passive thermal trip points\n", d->ident);
1819                 psv = -1;
1820         }
1821         return 0;
1822 }
1823
1824 static struct dmi_system_id thermal_dmi_table[] __initdata = {
1825         /*
1826          * Award BIOS on this AOpen makes thermal control almost worthless.
1827          * http://bugzilla.kernel.org/show_bug.cgi?id=8842
1828          */
1829         {
1830          .callback = thermal_act,
1831          .ident = "AOpen i915GMm-HFS",
1832          .matches = {
1833                 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
1834                 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
1835                 },
1836         },
1837         {
1838          .callback = thermal_psv,
1839          .ident = "AOpen i915GMm-HFS",
1840          .matches = {
1841                 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
1842                 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
1843                 },
1844         },
1845         {
1846          .callback = thermal_tzp,
1847          .ident = "AOpen i915GMm-HFS",
1848          .matches = {
1849                 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
1850                 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
1851                 },
1852         },
1853         {
1854          .callback = thermal_nocrt,
1855          .ident = "Gigabyte GA-7ZX",
1856          .matches = {
1857                 DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
1858                 DMI_MATCH(DMI_BOARD_NAME, "7ZX"),
1859                 },
1860         },
1861         {}
1862 };
1863
1864 static int __init acpi_thermal_init(void)
1865 {
1866         int result = 0;
1867
1868         dmi_check_system(thermal_dmi_table);
1869
1870         if (off) {
1871                 printk(KERN_NOTICE "ACPI: thermal control disabled\n");
1872                 return -ENODEV;
1873         }
1874         acpi_thermal_dir = proc_mkdir(ACPI_THERMAL_CLASS, acpi_root_dir);
1875         if (!acpi_thermal_dir)
1876                 return -ENODEV;
1877
1878         result = acpi_bus_register_driver(&acpi_thermal_driver);
1879         if (result < 0) {
1880                 remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir);
1881                 return -ENODEV;
1882         }
1883
1884         return 0;
1885 }
1886
1887 static void __exit acpi_thermal_exit(void)
1888 {
1889
1890         acpi_bus_unregister_driver(&acpi_thermal_driver);
1891
1892         remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir);
1893
1894         return;
1895 }
1896
1897 module_init(acpi_thermal_init);
1898 module_exit(acpi_thermal_exit);