drivers/acpi/sleep/main.c

   1 /*
   2  * sleep.c - ACPI sleep support.
   3  *
   4  * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
   5  * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
   6  * Copyright (c) 2000-2003 Patrick Mochel
   7  * Copyright (c) 2003 Open Source Development Lab
   8  *
   9  * This file is released under the GPLv2.
  10  *
  11  */
  12
  13 #include <linux/delay.h>
  14 #include <linux/irq.h>
  15 #include <linux/dmi.h>
  16 #include <linux/device.h>
  17 #include <linux/suspend.h>
  18
  19 #include <asm/io.h>
  20
  21 #include <acpi/acpi_bus.h>
  22 #include <acpi/acpi_drivers.h>
  23 #include "sleep.h"
  24
  25 u8 sleep_states[ACPI_S_STATE_COUNT];
  26
  27 #ifdef CONFIG_PM_SLEEP
  28 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
  29 #endif
  30
  31 static int acpi_sleep_prepare(u32 acpi_state)
  32 {
  33 #ifdef CONFIG_ACPI_SLEEP
  34         /* do we have a wakeup address for S2 and S3? */
  35         if (acpi_state == ACPI_STATE_S3) {
  36                 if (!acpi_wakeup_address) {
  37                         return -EFAULT;
  38                 }
  39                 acpi_set_firmware_waking_vector((acpi_physical_address)
  40                                                 virt_to_phys((void *)
  41                                                              acpi_wakeup_address));
  42
  43         }
  44         ACPI_FLUSH_CPU_CACHE();
  45         acpi_enable_wakeup_device_prep(acpi_state);
  46 #endif
  47         printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
  48                 acpi_state);
  49         acpi_enter_sleep_state_prep(acpi_state);
  50         return 0;
  51 }
  52
  53 #ifdef CONFIG_SUSPEND
  54 static struct platform_suspend_ops acpi_pm_ops;
  55
  56 extern void do_suspend_lowlevel(void);
  57
  58 static u32 acpi_suspend_states[] = {
  59         [PM_SUSPEND_ON] = ACPI_STATE_S0,
  60         [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
  61         [PM_SUSPEND_MEM] = ACPI_STATE_S3,
  62         [PM_SUSPEND_MAX] = ACPI_STATE_S5
  63 };
  64
  65 static int init_8259A_after_S1;
  66
  67 /**
  68  *      acpi_pm_begin - Set the target system sleep state to the state
  69  *              associated with given @pm_state, if supported.
  70  */
  71
  72 static int acpi_pm_begin(suspend_state_t pm_state)
  73 {
  74         u32 acpi_state = acpi_suspend_states[pm_state];
  75         int error = 0;
  76
  77         if (sleep_states[acpi_state]) {
  78                 acpi_target_sleep_state = acpi_state;
  79         } else {
  80                 printk(KERN_ERR "ACPI does not support this state: %d\n",
  81                         pm_state);
  82                 error = -ENOSYS;
  83         }
  84         return error;
  85 }
  86
  87 /**
  88  *      acpi_pm_prepare - Do preliminary suspend work.
  89  *
  90  *      If necessary, set the firmware waking vector and do arch-specific
  91  *      nastiness to get the wakeup code to the waking vector.
  92  */
  93
  94 static int acpi_pm_prepare(void)
  95 {
  96         int error = acpi_sleep_prepare(acpi_target_sleep_state);
  97
  98         if (error) {
  99                 acpi_target_sleep_state = ACPI_STATE_S0;
 100                 return error;
 101         }
 102
 103         return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
 104 }
 105
 106 /**
 107  *      acpi_pm_enter - Actually enter a sleep state.
 108  *      @pm_state: ignored
 109  *
 110  *      Flush caches and go to sleep. For STR we have to call arch-specific
 111  *      assembly, which in turn call acpi_enter_sleep_state().
 112  *      It's unfortunate, but it works. Please fix if you're feeling frisky.
 113  */
 114
 115 static int acpi_pm_enter(suspend_state_t pm_state)
 116 {
 117         acpi_status status = AE_OK;
 118         unsigned long flags = 0;
 119         u32 acpi_state = acpi_target_sleep_state;
 120
 121         ACPI_FLUSH_CPU_CACHE();
 122
 123         /* Do arch specific saving of state. */
 124         if (acpi_state == ACPI_STATE_S3) {
 125                 int error = acpi_save_state_mem();
 126
 127                 if (error)
 128                         return error;
 129         }
 130
 131         local_irq_save(flags);
 132         acpi_enable_wakeup_device(acpi_state);
 133         switch (acpi_state) {
 134         case ACPI_STATE_S1:
 135                 barrier();
 136                 status = acpi_enter_sleep_state(acpi_state);
 137                 break;
 138
 139         case ACPI_STATE_S3:
 140                 do_suspend_lowlevel();
 141                 break;
 142         }
 143
 144         /* Reprogram control registers and execute _BFS */
 145         acpi_leave_sleep_state_prep(acpi_state);
 146
 147         /* ACPI 3.0 specs (P62) says that it's the responsibility
 148          * of the OSPM to clear the status bit [ implying that the
 149          * POWER_BUTTON event should not reach userspace ]
 150          */
 151         if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
 152                 acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
 153
 154         /*
 155          * Disable and clear GPE status before interrupt is enabled. Some GPEs
 156          * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
 157          * acpi_leave_sleep_state will reenable specific GPEs later
 158          */
 159         acpi_hw_disable_all_gpes();
 160
 161         local_irq_restore(flags);
 162         printk(KERN_DEBUG "Back to C!\n");
 163
 164         /* restore processor state */
 165         if (acpi_state == ACPI_STATE_S3)
 166                 acpi_restore_state_mem();
 167
 168         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 169 }
 170
 171 /**
 172  *      acpi_pm_finish - Instruct the platform to leave a sleep state.
 173  *
 174  *      This is called after we wake back up (or if entering the sleep state
 175  *      failed).
 176  */
 177
 178 static void acpi_pm_finish(void)
 179 {
 180         u32 acpi_state = acpi_target_sleep_state;
 181
 182         acpi_disable_wakeup_device(acpi_state);
 183         acpi_leave_sleep_state(acpi_state);
 184
 185         /* reset firmware waking vector */
 186         acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 187
 188         acpi_target_sleep_state = ACPI_STATE_S0;
 189
 190 #ifdef CONFIG_X86
 191         if (init_8259A_after_S1) {
 192                 printk("Broken toshiba laptop -> kicking interrupts\n");
 193                 init_8259A(0);
 194         }
 195 #endif
 196 }
 197
 198 /**
 199  *      acpi_pm_end - Finish up suspend sequence.
 200  */
 201
 202 static void acpi_pm_end(void)
 203 {
 204         /*
 205          * This is necessary in case acpi_pm_finish() is not called during a
 206          * failing transition to a sleep state.
 207          */
 208         acpi_target_sleep_state = ACPI_STATE_S0;
 209 }
 210
 211 static int acpi_pm_state_valid(suspend_state_t pm_state)
 212 {
 213         u32 acpi_state;
 214
 215         switch (pm_state) {
 216         case PM_SUSPEND_ON:
 217         case PM_SUSPEND_STANDBY:
 218         case PM_SUSPEND_MEM:
 219                 acpi_state = acpi_suspend_states[pm_state];
 220
 221                 return sleep_states[acpi_state];
 222         default:
 223                 return 0;
 224         }
 225 }
 226
 227 static struct platform_suspend_ops acpi_pm_ops = {
 228         .valid = acpi_pm_state_valid,
 229         .begin = acpi_pm_begin,
 230         .prepare = acpi_pm_prepare,
 231         .enter = acpi_pm_enter,
 232         .finish = acpi_pm_finish,
 233         .end = acpi_pm_end,
 234 };
 235
 236 /*
 237  * Toshiba fails to preserve interrupts over S1, reinitialization
 238  * of 8259 is needed after S1 resume.
 239  */
 240 static int __init init_ints_after_s1(const struct dmi_system_id *d)
 241 {
 242         printk(KERN_WARNING "%s with broken S1 detected.\n", d->ident);
 243         init_8259A_after_S1 = 1;
 244         return 0;
 245 }
 246
 247 static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 248         {
 249          .callback = init_ints_after_s1,
 250          .ident = "Toshiba Satellite 4030cdt",
 251          .matches = {DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),},
 252          },
 253         {},
 254 };
 255 #endif /* CONFIG_SUSPEND */
 256
 257 #ifdef CONFIG_HIBERNATION
 258 static int acpi_hibernation_begin(void)
 259 {
 260         acpi_target_sleep_state = ACPI_STATE_S4;
 261
 262         return 0;
 263 }
 264
 265 static int acpi_hibernation_prepare(void)
 266 {
 267         int error = acpi_sleep_prepare(ACPI_STATE_S4);
 268
 269         if (error) {
 270                 acpi_target_sleep_state = ACPI_STATE_S0;
 271                 return error;
 272         }
 273
 274         return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
 275 }
 276
 277 static int acpi_hibernation_enter(void)
 278 {
 279         acpi_status status = AE_OK;
 280         unsigned long flags = 0;
 281
 282         ACPI_FLUSH_CPU_CACHE();
 283
 284         local_irq_save(flags);
 285         acpi_enable_wakeup_device(ACPI_STATE_S4);
 286         /* This shouldn't return.  If it returns, we have a problem */
 287         status = acpi_enter_sleep_state(ACPI_STATE_S4);
 288         /* Reprogram control registers and execute _BFS */
 289         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 290         local_irq_restore(flags);
 291
 292         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 293 }
 294
 295 static void acpi_hibernation_leave(void)
 296 {
 297         /*
 298          * If ACPI is not enabled by the BIOS and the boot kernel, we need to
 299          * enable it here.
 300          */
 301         acpi_enable();
 302         /* Reprogram control registers and execute _BFS */
 303         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 304 }
 305
 306 static void acpi_hibernation_finish(void)
 307 {
 308         acpi_disable_wakeup_device(ACPI_STATE_S4);
 309         acpi_leave_sleep_state(ACPI_STATE_S4);
 310
 311         /* reset firmware waking vector */
 312         acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 313
 314         acpi_target_sleep_state = ACPI_STATE_S0;
 315 }
 316
 317 static void acpi_hibernation_end(void)
 318 {
 319         /*
 320          * This is necessary in case acpi_hibernation_finish() is not called
 321          * during a failing transition to the sleep state.
 322          */
 323         acpi_target_sleep_state = ACPI_STATE_S0;
 324 }
 325
 326 static int acpi_hibernation_pre_restore(void)
 327 {
 328         acpi_status status;
 329
 330         status = acpi_hw_disable_all_gpes();
 331
 332         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 333 }
 334
 335 static void acpi_hibernation_restore_cleanup(void)
 336 {
 337         acpi_hw_enable_all_runtime_gpes();
 338 }
 339
 340 static struct platform_hibernation_ops acpi_hibernation_ops = {
 341         .begin = acpi_hibernation_begin,
 342         .end = acpi_hibernation_end,
 343         .pre_snapshot = acpi_hibernation_prepare,
 344         .finish = acpi_hibernation_finish,
 345         .prepare = acpi_hibernation_prepare,
 346         .enter = acpi_hibernation_enter,
 347         .leave = acpi_hibernation_leave,
 348         .pre_restore = acpi_hibernation_pre_restore,
 349         .restore_cleanup = acpi_hibernation_restore_cleanup,
 350 };
 351 #endif                          /* CONFIG_HIBERNATION */
 352
 353 int acpi_suspend(u32 acpi_state)
 354 {
 355         suspend_state_t states[] = {
 356                 [1] = PM_SUSPEND_STANDBY,
 357                 [3] = PM_SUSPEND_MEM,
 358                 [5] = PM_SUSPEND_MAX
 359         };
 360
 361         if (acpi_state < 6 && states[acpi_state])
 362                 return pm_suspend(states[acpi_state]);
 363         if (acpi_state == 4)
 364                 return hibernate();
 365         return -EINVAL;
 366 }
 367
 368 #ifdef CONFIG_PM_SLEEP
 369 /**
 370  *      acpi_pm_device_sleep_state - return preferred power state of ACPI device
 371  *              in the system sleep state given by %acpi_target_sleep_state
 372  *      @dev: device to examine
 373  *      @wake: if set, the device should be able to wake up the system
 374  *      @d_min_p: used to store the upper limit of allowed states range
 375  *      Return value: preferred power state of the device on success, -ENODEV on
 376  *              failure (ie. if there's no 'struct acpi_device' for @dev)
 377  *
 378  *      Find the lowest power (highest number) ACPI device power state that
 379  *      device @dev can be in while the system is in the sleep state represented
 380  *      by %acpi_target_sleep_state.  If @wake is nonzero, the device should be
 381  *      able to wake up the system from this sleep state.  If @d_min_p is set,
 382  *      the highest power (lowest number) device power state of @dev allowed
 383  *      in this system sleep state is stored at the location pointed to by it.
 384  *
 385  *      The caller must ensure that @dev is valid before using this function.
 386  *      The caller is also responsible for figuring out if the device is
 387  *      supposed to be able to wake up the system and passing this information
 388  *      via @wake.
 389  */
 390
 391 int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p)
 392 {
 393         acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
 394         struct acpi_device *adev;
 395         char acpi_method[] = "_SxD";
 396         unsigned long d_min, d_max;
 397
 398         if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
 399                 printk(KERN_DEBUG "ACPI handle has no context!\n");
 400                 return -ENODEV;
 401         }
 402
 403         acpi_method[2] = '0' + acpi_target_sleep_state;
 404         /*
 405          * If the sleep state is S0, we will return D3, but if the device has
 406          * _S0W, we will use the value from _S0W
 407          */
 408         d_min = ACPI_STATE_D0;
 409         d_max = ACPI_STATE_D3;
 410
 411         /*
 412          * If present, _SxD methods return the minimum D-state (highest power
 413          * state) we can use for the corresponding S-states.  Otherwise, the
 414          * minimum D-state is D0 (ACPI 3.x).
 415          *
 416          * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
 417          * provided -- that's our fault recovery, we ignore retval.
 418          */
 419         if (acpi_target_sleep_state > ACPI_STATE_S0)
 420                 acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
 421
 422         /*
 423          * If _PRW says we can wake up the system from the target sleep state,
 424          * the D-state returned by _SxD is sufficient for that (we assume a
 425          * wakeup-aware driver if wake is set).  Still, if _SxW exists
 426          * (ACPI 3.x), it should return the maximum (lowest power) D-state that
 427          * can wake the system.  _S0W may be valid, too.
 428          */
 429         if (acpi_target_sleep_state == ACPI_STATE_S0 ||
 430             (wake && adev->wakeup.state.enabled &&
 431              adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
 432                 acpi_status status;
 433
 434                 acpi_method[3] = 'W';
 435                 status = acpi_evaluate_integer(handle, acpi_method, NULL,
 436                                                 &d_max);
 437                 if (ACPI_FAILURE(status)) {
 438                         d_max = d_min;
 439                 } else if (d_max < d_min) {
 440                         /* Warn the user of the broken DSDT */
 441                         printk(KERN_WARNING "ACPI: Wrong value from %s\n",
 442                                 acpi_method);
 443                         /* Sanitize it */
 444                         d_min = d_max;
 445                 }
 446         }
 447
 448         if (d_min_p)
 449                 *d_min_p = d_min;
 450         return d_max;
 451 }
 452 #endif
 453
 454 static void acpi_power_off_prepare(void)
 455 {
 456         /* Prepare to power off the system */
 457         acpi_sleep_prepare(ACPI_STATE_S5);
 458         acpi_hw_disable_all_gpes();
 459 }
 460
 461 static void acpi_power_off(void)
 462 {
 463         /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
 464         printk("%s called\n", __func__);
 465         local_irq_disable();
 466         acpi_enable_wakeup_device(ACPI_STATE_S5);
 467         acpi_enter_sleep_state(ACPI_STATE_S5);
 468 }
 469
 470 int __init acpi_sleep_init(void)
 471 {
 472         acpi_status status;
 473         u8 type_a, type_b;
 474 #ifdef CONFIG_SUSPEND
 475         int i = 0;
 476
 477         dmi_check_system(acpisleep_dmi_table);
 478 #endif
 479
 480         if (acpi_disabled)
 481                 return 0;
 482
 483         sleep_states[ACPI_STATE_S0] = 1;
 484         printk(KERN_INFO PREFIX "(supports S0");
 485
 486 #ifdef CONFIG_SUSPEND
 487         for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
 488                 status = acpi_get_sleep_type_data(i, &type_a, &type_b);
 489                 if (ACPI_SUCCESS(status)) {
 490                         sleep_states[i] = 1;
 491                         printk(" S%d", i);
 492                 }
 493         }
 494
 495         suspend_set_ops(&acpi_pm_ops);
 496 #endif
 497
 498 #ifdef CONFIG_HIBERNATION
 499         status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
 500         if (ACPI_SUCCESS(status)) {
 501                 hibernation_set_ops(&acpi_hibernation_ops);
 502                 sleep_states[ACPI_STATE_S4] = 1;
 503                 printk(" S4");
 504         }
 505 #endif
 506         status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
 507         if (ACPI_SUCCESS(status)) {
 508                 sleep_states[ACPI_STATE_S5] = 1;
 509                 printk(" S5");
 510                 pm_power_off_prepare = acpi_power_off_prepare;
 511                 pm_power_off = acpi_power_off;
 512         }
 513         printk(")\n");
 514         return 0;
 515 }