83bfe0dd3ebab3e8828ce9c2d7f718c2810dedf8
[sfrench/cifs-2.6.git] / drivers / acpi / resources / rsmisc.c
1 /*******************************************************************************
2  *
3  * Module Name: rsmisc - Miscellaneous resource descriptors
4  *
5  ******************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2006, R. Byron Moore
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include <acpi/acpi.h>
45 #include <acpi/acresrc.h>
46
47 #define _COMPONENT          ACPI_RESOURCES
48 ACPI_MODULE_NAME("rsmisc")
49
50 #define INIT_RESOURCE_TYPE(i)       i->resource_offset
51 #define INIT_RESOURCE_LENGTH(i)     i->aml_offset
52 #define INIT_TABLE_LENGTH(i)        i->value
53 #define COMPARE_OPCODE(i)           i->resource_offset
54 #define COMPARE_TARGET(i)           i->aml_offset
55 #define COMPARE_VALUE(i)            i->value
56 /*******************************************************************************
57  *
58  * FUNCTION:    acpi_rs_convert_aml_to_resource
59  *
60  * PARAMETERS:  Resource            - Pointer to the resource descriptor
61  *              Aml                 - Where the AML descriptor is returned
62  *              Info                - Pointer to appropriate conversion table
63  *
64  * RETURN:      Status
65  *
66  * DESCRIPTION: Convert an external AML resource descriptor to the corresponding
67  *              internal resource descriptor
68  *
69  ******************************************************************************/
70 acpi_status
71 acpi_rs_convert_aml_to_resource(struct acpi_resource *resource,
72                                 union aml_resource *aml,
73                                 struct acpi_rsconvert_info *info)
74 {
75         acpi_rs_length aml_resource_length;
76         void *source;
77         void *destination;
78         char *target;
79         u8 count;
80         u8 flags_mode = FALSE;
81         u16 item_count = 0;
82         u16 temp16 = 0;
83
84         ACPI_FUNCTION_TRACE("rs_get_resource");
85
86         if (((acpi_native_uint) resource) & 0x3) {
87                 acpi_os_printf
88                     ("**** GET: Misaligned resource pointer: %p Type %2.2X Len %X\n",
89                      resource, resource->type, resource->length);
90         }
91
92         /* Extract the resource Length field (does not include header length) */
93
94         aml_resource_length = acpi_ut_get_resource_length(aml);
95
96         /*
97          * First table entry must be ACPI_RSC_INITxxx and must contain the
98          * table length (# of table entries)
99          */
100         count = INIT_TABLE_LENGTH(info);
101
102         while (count) {
103                 /*
104                  * Source is the external AML byte stream buffer,
105                  * destination is the internal resource descriptor
106                  */
107                 source = ACPI_ADD_PTR(void, aml, info->aml_offset);
108                 destination =
109                     ACPI_ADD_PTR(void, resource, info->resource_offset);
110
111                 switch (info->opcode) {
112                 case ACPI_RSC_INITGET:
113                         /*
114                          * Get the resource type and the initial (minimum) length
115                          */
116                         ACPI_MEMSET(resource, 0, INIT_RESOURCE_LENGTH(info));
117                         resource->type = INIT_RESOURCE_TYPE(info);
118                         resource->length = INIT_RESOURCE_LENGTH(info);
119                         break;
120
121                 case ACPI_RSC_INITSET:
122                         break;
123
124                 case ACPI_RSC_FLAGINIT:
125
126                         flags_mode = TRUE;
127                         break;
128
129                 case ACPI_RSC_1BITFLAG:
130                         /*
131                          * Mask and shift the flag bit
132                          */
133                         ACPI_SET8(destination) = (u8)
134                             ((ACPI_GET8(source) >> info->value) & 0x01);
135                         break;
136
137                 case ACPI_RSC_2BITFLAG:
138                         /*
139                          * Mask and shift the flag bits
140                          */
141                         ACPI_SET8(destination) = (u8)
142                             ((ACPI_GET8(source) >> info->value) & 0x03);
143                         break;
144
145                 case ACPI_RSC_COUNT:
146
147                         item_count = ACPI_GET8(source);
148                         ACPI_SET8(destination) = (u8) item_count;
149
150                         resource->length = resource->length +
151                             (info->value * (item_count - 1));
152                         break;
153
154                 case ACPI_RSC_COUNT16:
155
156                         item_count = aml_resource_length;
157                         ACPI_SET16(destination) = item_count;
158
159                         resource->length = resource->length +
160                             (info->value * (item_count - 1));
161                         break;
162
163                 case ACPI_RSC_LENGTH:
164
165                         resource->length = resource->length + info->value;
166                         break;
167
168                 case ACPI_RSC_MOVE8:
169                 case ACPI_RSC_MOVE16:
170                 case ACPI_RSC_MOVE32:
171                 case ACPI_RSC_MOVE64:
172                         /*
173                          * Raw data move. Use the Info value field unless item_count has
174                          * been previously initialized via a COUNT opcode
175                          */
176                         if (info->value) {
177                                 item_count = info->value;
178                         }
179                         acpi_rs_move_data(destination, source, item_count,
180                                           info->opcode);
181                         break;
182
183                 case ACPI_RSC_SET8:
184
185                         ACPI_MEMSET(destination, info->aml_offset, info->value);
186                         break;
187
188                 case ACPI_RSC_DATA8:
189
190                         target = ACPI_ADD_PTR(char, resource, info->value);
191                         ACPI_MEMCPY(destination, source, ACPI_GET16(target));
192                         break;
193
194                 case ACPI_RSC_ADDRESS:
195                         /*
196                          * Common handler for address descriptor flags
197                          */
198                         if (!acpi_rs_get_address_common(resource, aml)) {
199                                 return_ACPI_STATUS
200                                     (AE_AML_INVALID_RESOURCE_TYPE);
201                         }
202                         break;
203
204                 case ACPI_RSC_SOURCE:
205                         /*
206                          * Optional resource_source (Index and String)
207                          */
208                         resource->length +=
209                             acpi_rs_get_resource_source(aml_resource_length,
210                                                         info->value,
211                                                         destination, aml, NULL);
212                         break;
213
214                 case ACPI_RSC_SOURCEX:
215                         /*
216                          * Optional resource_source (Index and String). This is the more
217                          * complicated case used by the Interrupt() macro
218                          */
219                         target =
220                             ACPI_ADD_PTR(char, resource,
221                                          info->aml_offset + (item_count * 4));
222
223                         resource->length +=
224                             acpi_rs_get_resource_source(aml_resource_length,
225                                                         (acpi_rs_length) (((item_count - 1) * sizeof(u32)) + info->value), destination, aml, target);
226                         break;
227
228                 case ACPI_RSC_BITMASK:
229                         /*
230                          * 8-bit encoded bitmask (DMA macro)
231                          */
232                         item_count =
233                             acpi_rs_decode_bitmask(ACPI_GET8(source),
234                                                    destination);
235                         if (item_count) {
236                                 resource->length += (item_count - 1);
237                         }
238
239                         target = ACPI_ADD_PTR(char, resource, info->value);
240                         ACPI_SET8(target) = (u8) item_count;
241                         break;
242
243                 case ACPI_RSC_BITMASK16:
244                         /*
245                          * 16-bit encoded bitmask (IRQ macro)
246                          */
247                         ACPI_MOVE_16_TO_16(&temp16, source);
248
249                         item_count =
250                             acpi_rs_decode_bitmask(temp16, destination);
251                         if (item_count) {
252                                 resource->length += (item_count - 1);
253                         }
254
255                         target = ACPI_ADD_PTR(char, resource, info->value);
256                         ACPI_SET8(target) = (u8) item_count;
257                         break;
258
259                 case ACPI_RSC_EXIT_NE:
260                         /*
261                          * Control - Exit conversion if not equal
262                          */
263                         switch (info->resource_offset) {
264                         case ACPI_RSC_COMPARE_AML_LENGTH:
265                                 if (aml_resource_length != info->value) {
266                                         goto exit;
267                                 }
268                                 break;
269
270                         case ACPI_RSC_COMPARE_VALUE:
271                                 if (ACPI_GET8(source) != info->value) {
272                                         goto exit;
273                                 }
274                                 break;
275
276                         default:
277                                 acpi_os_printf
278                                     ("*** Invalid conversion sub-opcode\n");
279                                 return_ACPI_STATUS(AE_BAD_PARAMETER);
280                         }
281                         break;
282
283                 default:
284
285                         acpi_os_printf("*** Invalid conversion opcode\n");
286                         return_ACPI_STATUS(AE_BAD_PARAMETER);
287                 }
288
289                 count--;
290                 info++;
291         }
292
293       exit:
294         if (!flags_mode) {
295                 /* Round the resource struct length up to the next 32-bit boundary */
296
297                 resource->length = ACPI_ROUND_UP_to_32_bITS(resource->length);
298         }
299         return_ACPI_STATUS(AE_OK);
300 }
301
302 /*******************************************************************************
303  *
304  * FUNCTION:    acpi_rs_convert_resource_to_aml
305  *
306  * PARAMETERS:  Resource            - Pointer to the resource descriptor
307  *              Aml                 - Where the AML descriptor is returned
308  *              Info                - Pointer to appropriate conversion table
309  *
310  * RETURN:      Status
311  *
312  * DESCRIPTION: Convert an internal resource descriptor to the corresponding
313  *              external AML resource descriptor.
314  *
315  ******************************************************************************/
316
317 acpi_status
318 acpi_rs_convert_resource_to_aml(struct acpi_resource *resource,
319                                 union aml_resource *aml,
320                                 struct acpi_rsconvert_info *info)
321 {
322         void *source = NULL;
323         void *destination;
324         acpi_rsdesc_size aml_length = 0;
325         u8 count;
326         u16 temp16 = 0;
327         u16 item_count = 0;
328
329         ACPI_FUNCTION_TRACE("rs_convert_resource_to_aml");
330
331         /*
332          * First table entry must be ACPI_RSC_INITxxx and must contain the
333          * table length (# of table entries)
334          */
335         count = INIT_TABLE_LENGTH(info);
336
337         while (count) {
338                 /*
339                  * Source is the internal resource descriptor,
340                  * destination is the external AML byte stream buffer
341                  */
342                 source = ACPI_ADD_PTR(void, resource, info->resource_offset);
343                 destination = ACPI_ADD_PTR(void, aml, info->aml_offset);
344
345                 switch (info->opcode) {
346                 case ACPI_RSC_INITSET:
347
348                         ACPI_MEMSET(aml, 0, INIT_RESOURCE_LENGTH(info));
349                         aml_length = INIT_RESOURCE_LENGTH(info);
350                         acpi_rs_set_resource_header(INIT_RESOURCE_TYPE(info),
351                                                     aml_length, aml);
352                         break;
353
354                 case ACPI_RSC_INITGET:
355                         break;
356
357                 case ACPI_RSC_FLAGINIT:
358                         /*
359                          * Clear the flag byte
360                          */
361                         ACPI_SET8(destination) = 0;
362                         break;
363
364                 case ACPI_RSC_1BITFLAG:
365                         /*
366                          * Mask and shift the flag bit
367                          */
368                         ACPI_SET8(destination) |= (u8)
369                             ((ACPI_GET8(source) & 0x01) << info->value);
370                         break;
371
372                 case ACPI_RSC_2BITFLAG:
373                         /*
374                          * Mask and shift the flag bits
375                          */
376                         ACPI_SET8(destination) |= (u8)
377                             ((ACPI_GET8(source) & 0x03) << info->value);
378                         break;
379
380                 case ACPI_RSC_COUNT:
381
382                         item_count = ACPI_GET8(source);
383                         ACPI_SET8(destination) = (u8) item_count;
384
385                         aml_length =
386                             (u16) (aml_length +
387                                    (info->value * (item_count - 1)));
388                         break;
389
390                 case ACPI_RSC_COUNT16:
391
392                         item_count = ACPI_GET16(source);
393                         aml_length = (u16) (aml_length + item_count);
394                         acpi_rs_set_resource_length(aml_length, aml);
395                         break;
396
397                 case ACPI_RSC_LENGTH:
398
399                         acpi_rs_set_resource_length(info->value, aml);
400                         break;
401
402                 case ACPI_RSC_MOVE8:
403                 case ACPI_RSC_MOVE16:
404                 case ACPI_RSC_MOVE32:
405                 case ACPI_RSC_MOVE64:
406
407                         if (info->value) {
408                                 item_count = info->value;
409                         }
410                         acpi_rs_move_data(destination, source, item_count,
411                                           info->opcode);
412                         break;
413
414                 case ACPI_RSC_ADDRESS:
415
416                         /* Set the Resource Type, General Flags, and Type-Specific Flags */
417
418                         acpi_rs_set_address_common(aml, resource);
419                         break;
420
421                 case ACPI_RSC_SOURCEX:
422                         /*
423                          * Optional resource_source (Index and String)
424                          */
425                         aml_length =
426                             acpi_rs_set_resource_source(aml,
427                                                         (acpi_rs_length)
428                                                         aml_length, source);
429                         acpi_rs_set_resource_length(aml_length, aml);
430                         break;
431
432                 case ACPI_RSC_SOURCE:
433                         /*
434                          * Optional resource_source (Index and String). This is the more
435                          * complicated case used by the Interrupt() macro
436                          */
437                         aml_length =
438                             acpi_rs_set_resource_source(aml, info->value,
439                                                         source);
440                         acpi_rs_set_resource_length(aml_length, aml);
441                         break;
442
443                 case ACPI_RSC_BITMASK:
444                         /*
445                          * 8-bit encoded bitmask (DMA macro)
446                          */
447                         ACPI_SET8(destination) = (u8)
448                             acpi_rs_encode_bitmask(source,
449                                                    *ACPI_ADD_PTR(u8, resource,
450                                                                  info->value));
451                         break;
452
453                 case ACPI_RSC_BITMASK16:
454                         /*
455                          * 16-bit encoded bitmask (IRQ macro)
456                          */
457                         temp16 = acpi_rs_encode_bitmask(source,
458                                                         *ACPI_ADD_PTR(u8,
459                                                                       resource,
460                                                                       info->
461                                                                       value));
462                         ACPI_MOVE_16_TO_16(destination, &temp16);
463                         break;
464
465                 case ACPI_RSC_EXIT_LE:
466                         /*
467                          * Control - Exit conversion if less than or equal
468                          */
469                         if (item_count <= info->value) {
470                                 goto exit;
471                         }
472                         break;
473
474                 case ACPI_RSC_EXIT_NE:
475                         /*
476                          * Control - Exit conversion if not equal
477                          */
478                         switch (COMPARE_OPCODE(info)) {
479                         case ACPI_RSC_COMPARE_VALUE:
480
481                                 if (*ACPI_ADD_PTR(u8, resource,
482                                                   COMPARE_TARGET(info)) !=
483                                     COMPARE_VALUE(info)) {
484                                         goto exit;
485                                 }
486                                 break;
487
488                         default:
489                                 acpi_os_printf
490                                     ("*** Invalid conversion sub-opcode\n");
491                                 return_ACPI_STATUS(AE_BAD_PARAMETER);
492                         }
493                         break;
494
495                 default:
496
497                         acpi_os_printf("*** Invalid conversion opcode\n");
498                         return_ACPI_STATUS(AE_BAD_PARAMETER);
499                 }
500
501                 count--;
502                 info++;
503         }
504
505       exit:
506         return_ACPI_STATUS(AE_OK);
507 }
508
509 #if 0
510 /* Previous resource validations */
511
512 if (aml->ext_address64.revision_iD != AML_RESOURCE_EXTENDED_ADDRESS_REVISION) {
513         return_ACPI_STATUS(AE_SUPPORT);
514 }
515
516 if (resource->data.start_dpf.performance_robustness >= 3) {
517         return_ACPI_STATUS(AE_AML_BAD_RESOURCE_VALUE);
518 }
519
520 if (((aml->irq.flags & 0x09) == 0x00) || ((aml->irq.flags & 0x09) == 0x09)) {
521         /*
522          * Only [active_high, edge_sensitive] or [active_low, level_sensitive]
523          * polarity/trigger interrupts are allowed (ACPI spec, section
524          * "IRQ Format"), so 0x00 and 0x09 are illegal.
525          */
526         ACPI_REPORT_ERROR(("Invalid interrupt polarity/trigger in resource list, %X\n", aml->irq.flags));
527         return_ACPI_STATUS(AE_BAD_DATA);
528 }
529
530 resource->data.extended_irq.interrupt_count = temp8;
531 if (temp8 < 1) {
532         /* Must have at least one IRQ */
533
534         return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
535 }
536
537 if (resource->data.dma.transfer == 0x03) {
538         ACPI_REPORT_ERROR(("Invalid DMA.Transfer preference (3)\n"));
539         return_ACPI_STATUS(AE_BAD_DATA);
540 }
541 #endif