drivers/acpi/dispatcher/dswstate.c

   1 /******************************************************************************
   2  *
   3  * Module Name: dswstate - Dispatcher parse tree walk management routines
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2006, R. Byron Moore
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include <acpi/acparser.h>
  46 #include <acpi/acdispat.h>
  47 #include <acpi/acnamesp.h>
  48
  49 #define _COMPONENT          ACPI_DISPATCHER
  50 ACPI_MODULE_NAME("dswstate")
  51
  52 /* Local prototypes */
  53 #ifdef ACPI_OBSOLETE_FUNCTIONS
  54 acpi_status
  55 acpi_ds_result_insert(void *object,
  56                       u32 index, struct acpi_walk_state *walk_state);
  57
  58 acpi_status acpi_ds_obj_stack_delete_all(struct acpi_walk_state *walk_state);
  59
  60 acpi_status
  61 acpi_ds_obj_stack_pop_object(union acpi_operand_object **object,
  62                              struct acpi_walk_state *walk_state);
  63
  64 void *acpi_ds_obj_stack_get_value(u32 index,
  65                                   struct acpi_walk_state *walk_state);
  66 #endif
  67
  68 #ifdef ACPI_FUTURE_USAGE
  69
  70 /*******************************************************************************
  71  *
  72  * FUNCTION:    acpi_ds_result_remove
  73  *
  74  * PARAMETERS:  Object              - Where to return the popped object
  75  *              Index               - Where to extract the object
  76  *              walk_state          - Current Walk state
  77  *
  78  * RETURN:      Status
  79  *
  80  * DESCRIPTION: Pop an object off the bottom of this walk's result stack.  In
  81  *              other words, this is a FIFO.
  82  *
  83  ******************************************************************************/
  84
  85 acpi_status
  86 acpi_ds_result_remove(union acpi_operand_object **object,
  87                       u32 index, struct acpi_walk_state *walk_state)
  88 {
  89         union acpi_generic_state *state;
  90
  91         ACPI_FUNCTION_NAME("ds_result_remove");
  92
  93         state = walk_state->results;
  94         if (!state) {
  95                 ACPI_REPORT_ERROR(("No result object pushed! State=%p\n",
  96                                    walk_state));
  97                 return (AE_NOT_EXIST);
  98         }
  99
 100         if (index >= ACPI_OBJ_MAX_OPERAND) {
 101                 ACPI_REPORT_ERROR(("Index out of range: %X State=%p Num=%X\n",
 102                                    index, walk_state,
 103                                    state->results.num_results));
 104         }
 105
 106         /* Check for a valid result object */
 107
 108         if (!state->results.obj_desc[index]) {
 109                 ACPI_REPORT_ERROR(("Null operand! State=%p #Ops=%X, Index=%X\n",
 110                                    walk_state, state->results.num_results,
 111                                    index));
 112                 return (AE_AML_NO_RETURN_VALUE);
 113         }
 114
 115         /* Remove the object */
 116
 117         state->results.num_results--;
 118
 119         *object = state->results.obj_desc[index];
 120         state->results.obj_desc[index] = NULL;
 121
 122         ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 123                           "Obj=%p [%s] Index=%X State=%p Num=%X\n",
 124                           *object,
 125                           (*object) ? acpi_ut_get_object_type_name(*object) :
 126                           "NULL", index, walk_state,
 127                           state->results.num_results));
 128
 129         return (AE_OK);
 130 }
 131
 132 #endif                          /*  ACPI_FUTURE_USAGE  */
 133
 134 /*******************************************************************************
 135  *
 136  * FUNCTION:    acpi_ds_result_pop
 137  *
 138  * PARAMETERS:  Object              - Where to return the popped object
 139  *              walk_state          - Current Walk state
 140  *
 141  * RETURN:      Status
 142  *
 143  * DESCRIPTION: Pop an object off the bottom of this walk's result stack.  In
 144  *              other words, this is a FIFO.
 145  *
 146  ******************************************************************************/
 147
 148 acpi_status
 149 acpi_ds_result_pop(union acpi_operand_object ** object,
 150                    struct acpi_walk_state * walk_state)
 151 {
 152         acpi_native_uint index;
 153         union acpi_generic_state *state;
 154
 155         ACPI_FUNCTION_NAME("ds_result_pop");
 156
 157         state = walk_state->results;
 158         if (!state) {
 159                 return (AE_OK);
 160         }
 161
 162         if (!state->results.num_results) {
 163                 ACPI_REPORT_ERROR(("Result stack is empty! State=%p\n",
 164                                    walk_state));
 165                 return (AE_AML_NO_RETURN_VALUE);
 166         }
 167
 168         /* Remove top element */
 169
 170         state->results.num_results--;
 171
 172         for (index = ACPI_OBJ_NUM_OPERANDS; index; index--) {
 173                 /* Check for a valid result object */
 174
 175                 if (state->results.obj_desc[index - 1]) {
 176                         *object = state->results.obj_desc[index - 1];
 177                         state->results.obj_desc[index - 1] = NULL;
 178
 179                         ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 180                                           "Obj=%p [%s] Index=%X State=%p Num=%X\n",
 181                                           *object,
 182                                           (*object) ?
 183                                           acpi_ut_get_object_type_name(*object)
 184                                           : "NULL", (u32) index - 1, walk_state,
 185                                           state->results.num_results));
 186
 187                         return (AE_OK);
 188                 }
 189         }
 190
 191         ACPI_REPORT_ERROR(("No result objects! State=%p\n", walk_state));
 192         return (AE_AML_NO_RETURN_VALUE);
 193 }
 194
 195 /*******************************************************************************
 196  *
 197  * FUNCTION:    acpi_ds_result_pop_from_bottom
 198  *
 199  * PARAMETERS:  Object              - Where to return the popped object
 200  *              walk_state          - Current Walk state
 201  *
 202  * RETURN:      Status
 203  *
 204  * DESCRIPTION: Pop an object off the bottom of this walk's result stack.  In
 205  *              other words, this is a FIFO.
 206  *
 207  ******************************************************************************/
 208
 209 acpi_status
 210 acpi_ds_result_pop_from_bottom(union acpi_operand_object ** object,
 211                                struct acpi_walk_state * walk_state)
 212 {
 213         acpi_native_uint index;
 214         union acpi_generic_state *state;
 215
 216         ACPI_FUNCTION_NAME("ds_result_pop_from_bottom");
 217
 218         state = walk_state->results;
 219         if (!state) {
 220                 ACPI_REPORT_ERROR(("No result object pushed! State=%p\n",
 221                                    walk_state));
 222                 return (AE_NOT_EXIST);
 223         }
 224
 225         if (!state->results.num_results) {
 226                 ACPI_REPORT_ERROR(("No result objects! State=%p\n",
 227                                    walk_state));
 228                 return (AE_AML_NO_RETURN_VALUE);
 229         }
 230
 231         /* Remove Bottom element */
 232
 233         *object = state->results.obj_desc[0];
 234
 235         /* Push entire stack down one element */
 236
 237         for (index = 0; index < state->results.num_results; index++) {
 238                 state->results.obj_desc[index] =
 239                     state->results.obj_desc[index + 1];
 240         }
 241
 242         state->results.num_results--;
 243
 244         /* Check for a valid result object */
 245
 246         if (!*object) {
 247                 ACPI_REPORT_ERROR(("Null operand! State=%p #Ops=%X Index=%X\n",
 248                                    walk_state, state->results.num_results,
 249                                    (u32) index));
 250                 return (AE_AML_NO_RETURN_VALUE);
 251         }
 252
 253         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Obj=%p [%s] Results=%p State=%p\n",
 254                           *object,
 255                           (*object) ? acpi_ut_get_object_type_name(*object) :
 256                           "NULL", state, walk_state));
 257
 258         return (AE_OK);
 259 }
 260
 261 /*******************************************************************************
 262  *
 263  * FUNCTION:    acpi_ds_result_push
 264  *
 265  * PARAMETERS:  Object              - Where to return the popped object
 266  *              walk_state          - Current Walk state
 267  *
 268  * RETURN:      Status
 269  *
 270  * DESCRIPTION: Push an object onto the current result stack
 271  *
 272  ******************************************************************************/
 273
 274 acpi_status
 275 acpi_ds_result_push(union acpi_operand_object * object,
 276                     struct acpi_walk_state * walk_state)
 277 {
 278         union acpi_generic_state *state;
 279
 280         ACPI_FUNCTION_NAME("ds_result_push");
 281
 282         state = walk_state->results;
 283         if (!state) {
 284                 ACPI_REPORT_ERROR(("No result stack frame during push\n"));
 285                 return (AE_AML_INTERNAL);
 286         }
 287
 288         if (state->results.num_results == ACPI_OBJ_NUM_OPERANDS) {
 289                 ACPI_REPORT_ERROR(("Result stack overflow: Obj=%p State=%p Num=%X\n", object, walk_state, state->results.num_results));
 290                 return (AE_STACK_OVERFLOW);
 291         }
 292
 293         if (!object) {
 294                 ACPI_REPORT_ERROR(("Null Object! Obj=%p State=%p Num=%X\n",
 295                                    object, walk_state,
 296                                    state->results.num_results));
 297                 return (AE_BAD_PARAMETER);
 298         }
 299
 300         state->results.obj_desc[state->results.num_results] = object;
 301         state->results.num_results++;
 302
 303         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Obj=%p [%s] State=%p Num=%X Cur=%X\n",
 304                           object,
 305                           object ?
 306                           acpi_ut_get_object_type_name((union
 307                                                         acpi_operand_object *)
 308                                                        object) : "NULL",
 309                           walk_state, state->results.num_results,
 310                           walk_state->current_result));
 311
 312         return (AE_OK);
 313 }
 314
 315 /*******************************************************************************
 316  *
 317  * FUNCTION:    acpi_ds_result_stack_push
 318  *
 319  * PARAMETERS:  walk_state          - Current Walk state
 320  *
 321  * RETURN:      Status
 322  *
 323  * DESCRIPTION: Push an object onto the walk_state result stack.
 324  *
 325  ******************************************************************************/
 326
 327 acpi_status acpi_ds_result_stack_push(struct acpi_walk_state * walk_state)
 328 {
 329         union acpi_generic_state *state;
 330
 331         ACPI_FUNCTION_NAME("ds_result_stack_push");
 332
 333         state = acpi_ut_create_generic_state();
 334         if (!state) {
 335                 return (AE_NO_MEMORY);
 336         }
 337
 338         state->common.data_type = ACPI_DESC_TYPE_STATE_RESULT;
 339         acpi_ut_push_generic_state(&walk_state->results, state);
 340
 341         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Results=%p State=%p\n",
 342                           state, walk_state));
 343
 344         return (AE_OK);
 345 }
 346
 347 /*******************************************************************************
 348  *
 349  * FUNCTION:    acpi_ds_result_stack_pop
 350  *
 351  * PARAMETERS:  walk_state          - Current Walk state
 352  *
 353  * RETURN:      Status
 354  *
 355  * DESCRIPTION: Pop an object off of the walk_state result stack.
 356  *
 357  ******************************************************************************/
 358
 359 acpi_status acpi_ds_result_stack_pop(struct acpi_walk_state * walk_state)
 360 {
 361         union acpi_generic_state *state;
 362
 363         ACPI_FUNCTION_NAME("ds_result_stack_pop");
 364
 365         /* Check for stack underflow */
 366
 367         if (walk_state->results == NULL) {
 368                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Underflow - State=%p\n",
 369                                   walk_state));
 370                 return (AE_AML_NO_OPERAND);
 371         }
 372
 373         state = acpi_ut_pop_generic_state(&walk_state->results);
 374
 375         ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 376                           "Result=%p remaining_results=%X State=%p\n",
 377                           state, state->results.num_results, walk_state));
 378
 379         acpi_ut_delete_generic_state(state);
 380
 381         return (AE_OK);
 382 }
 383
 384 /*******************************************************************************
 385  *
 386  * FUNCTION:    acpi_ds_obj_stack_push
 387  *
 388  * PARAMETERS:  Object              - Object to push
 389  *              walk_state          - Current Walk state
 390  *
 391  * RETURN:      Status
 392  *
 393  * DESCRIPTION: Push an object onto this walk's object/operand stack
 394  *
 395  ******************************************************************************/
 396
 397 acpi_status
 398 acpi_ds_obj_stack_push(void *object, struct acpi_walk_state * walk_state)
 399 {
 400         ACPI_FUNCTION_NAME("ds_obj_stack_push");
 401
 402         /* Check for stack overflow */
 403
 404         if (walk_state->num_operands >= ACPI_OBJ_NUM_OPERANDS) {
 405                 ACPI_REPORT_ERROR(("Object stack overflow! Obj=%p State=%p #Ops=%X\n", object, walk_state, walk_state->num_operands));
 406                 return (AE_STACK_OVERFLOW);
 407         }
 408
 409         /* Put the object onto the stack */
 410
 411         walk_state->operands[walk_state->num_operands] = object;
 412         walk_state->num_operands++;
 413
 414         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Obj=%p [%s] State=%p #Ops=%X\n",
 415                           object,
 416                           acpi_ut_get_object_type_name((union
 417                                                         acpi_operand_object *)
 418                                                        object), walk_state,
 419                           walk_state->num_operands));
 420
 421         return (AE_OK);
 422 }
 423
 424 /*******************************************************************************
 425  *
 426  * FUNCTION:    acpi_ds_obj_stack_pop
 427  *
 428  * PARAMETERS:  pop_count           - Number of objects/entries to pop
 429  *              walk_state          - Current Walk state
 430  *
 431  * RETURN:      Status
 432  *
 433  * DESCRIPTION: Pop this walk's object stack.  Objects on the stack are NOT
 434  *              deleted by this routine.
 435  *
 436  ******************************************************************************/
 437
 438 acpi_status
 439 acpi_ds_obj_stack_pop(u32 pop_count, struct acpi_walk_state * walk_state)
 440 {
 441         u32 i;
 442
 443         ACPI_FUNCTION_NAME("ds_obj_stack_pop");
 444
 445         for (i = 0; i < pop_count; i++) {
 446                 /* Check for stack underflow */
 447
 448                 if (walk_state->num_operands == 0) {
 449                         ACPI_REPORT_ERROR(("Object stack underflow! Count=%X State=%p #Ops=%X\n", pop_count, walk_state, walk_state->num_operands));
 450                         return (AE_STACK_UNDERFLOW);
 451                 }
 452
 453                 /* Just set the stack entry to null */
 454
 455                 walk_state->num_operands--;
 456                 walk_state->operands[walk_state->num_operands] = NULL;
 457         }
 458
 459         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Count=%X State=%p #Ops=%X\n",
 460                           pop_count, walk_state, walk_state->num_operands));
 461
 462         return (AE_OK);
 463 }
 464
 465 /*******************************************************************************
 466  *
 467  * FUNCTION:    acpi_ds_obj_stack_pop_and_delete
 468  *
 469  * PARAMETERS:  pop_count           - Number of objects/entries to pop
 470  *              walk_state          - Current Walk state
 471  *
 472  * RETURN:      Status
 473  *
 474  * DESCRIPTION: Pop this walk's object stack and delete each object that is
 475  *              popped off.
 476  *
 477  ******************************************************************************/
 478
 479 acpi_status
 480 acpi_ds_obj_stack_pop_and_delete(u32 pop_count,
 481                                  struct acpi_walk_state * walk_state)
 482 {
 483         u32 i;
 484         union acpi_operand_object *obj_desc;
 485
 486         ACPI_FUNCTION_NAME("ds_obj_stack_pop_and_delete");
 487
 488         for (i = 0; i < pop_count; i++) {
 489                 /* Check for stack underflow */
 490
 491                 if (walk_state->num_operands == 0) {
 492                         ACPI_REPORT_ERROR(("Object stack underflow! Count=%X State=%p #Ops=%X\n", pop_count, walk_state, walk_state->num_operands));
 493                         return (AE_STACK_UNDERFLOW);
 494                 }
 495
 496                 /* Pop the stack and delete an object if present in this stack entry */
 497
 498                 walk_state->num_operands--;
 499                 obj_desc = walk_state->operands[walk_state->num_operands];
 500                 if (obj_desc) {
 501                         acpi_ut_remove_reference(walk_state->
 502                                                  operands[walk_state->
 503                                                           num_operands]);
 504                         walk_state->operands[walk_state->num_operands] = NULL;
 505                 }
 506         }
 507
 508         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Count=%X State=%p #Ops=%X\n",
 509                           pop_count, walk_state, walk_state->num_operands));
 510
 511         return (AE_OK);
 512 }
 513
 514 /*******************************************************************************
 515  *
 516  * FUNCTION:    acpi_ds_get_current_walk_state
 517  *
 518  * PARAMETERS:  Thread          - Get current active state for this Thread
 519  *
 520  * RETURN:      Pointer to the current walk state
 521  *
 522  * DESCRIPTION: Get the walk state that is at the head of the list (the "current"
 523  *              walk state.)
 524  *
 525  ******************************************************************************/
 526
 527 struct acpi_walk_state *acpi_ds_get_current_walk_state(struct acpi_thread_state
 528                                                        *thread)
 529 {
 530         ACPI_FUNCTION_NAME("ds_get_current_walk_state");
 531
 532         if (!thread) {
 533                 return (NULL);
 534         }
 535
 536         ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "Current walk_state %p\n",
 537                           thread->walk_state_list));
 538
 539         return (thread->walk_state_list);
 540 }
 541
 542 /*******************************************************************************
 543  *
 544  * FUNCTION:    acpi_ds_push_walk_state
 545  *
 546  * PARAMETERS:  walk_state      - State to push
 547  *              Thread          - Thread state object
 548  *
 549  * RETURN:      None
 550  *
 551  * DESCRIPTION: Place the Thread state at the head of the state list.
 552  *
 553  ******************************************************************************/
 554
 555 void
 556 acpi_ds_push_walk_state(struct acpi_walk_state *walk_state,
 557                         struct acpi_thread_state *thread)
 558 {
 559         ACPI_FUNCTION_TRACE("ds_push_walk_state");
 560
 561         walk_state->next = thread->walk_state_list;
 562         thread->walk_state_list = walk_state;
 563
 564         return_VOID;
 565 }
 566
 567 /*******************************************************************************
 568  *
 569  * FUNCTION:    acpi_ds_pop_walk_state
 570  *
 571  * PARAMETERS:  Thread      - Current thread state
 572  *
 573  * RETURN:      A walk_state object popped from the thread's stack
 574  *
 575  * DESCRIPTION: Remove and return the walkstate object that is at the head of
 576  *              the walk stack for the given walk list.  NULL indicates that
 577  *              the list is empty.
 578  *
 579  ******************************************************************************/
 580
 581 struct acpi_walk_state *acpi_ds_pop_walk_state(struct acpi_thread_state *thread)
 582 {
 583         struct acpi_walk_state *walk_state;
 584
 585         ACPI_FUNCTION_TRACE("ds_pop_walk_state");
 586
 587         walk_state = thread->walk_state_list;
 588
 589         if (walk_state) {
 590                 /* Next walk state becomes the current walk state */
 591
 592                 thread->walk_state_list = walk_state->next;
 593
 594                 /*
 595                  * Don't clear the NEXT field, this serves as an indicator
 596                  * that there is a parent WALK STATE
 597                  * Do Not: walk_state->Next = NULL;
 598                  */
 599         }
 600
 601         return_PTR(walk_state);
 602 }
 603
 604 /*******************************************************************************
 605  *
 606  * FUNCTION:    acpi_ds_create_walk_state
 607  *
 608  * PARAMETERS:  owner_id        - ID for object creation
 609  *              Origin          - Starting point for this walk
 610  *              mth_desc        - Method object
 611  *              Thread          - Current thread state
 612  *
 613  * RETURN:      Pointer to the new walk state.
 614  *
 615  * DESCRIPTION: Allocate and initialize a new walk state.  The current walk
 616  *              state is set to this new state.
 617  *
 618  ******************************************************************************/
 619
 620 struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id,
 621                                                   union acpi_parse_object
 622                                                   *origin,
 623                                                   union acpi_operand_object
 624                                                   *mth_desc,
 625                                                   struct acpi_thread_state
 626                                                   *thread)
 627 {
 628         struct acpi_walk_state *walk_state;
 629         acpi_status status;
 630
 631         ACPI_FUNCTION_TRACE("ds_create_walk_state");
 632
 633         walk_state = ACPI_MEM_CALLOCATE(sizeof(struct acpi_walk_state));
 634         if (!walk_state) {
 635                 return_PTR(NULL);
 636         }
 637
 638         walk_state->data_type = ACPI_DESC_TYPE_WALK;
 639         walk_state->owner_id = owner_id;
 640         walk_state->origin = origin;
 641         walk_state->method_desc = mth_desc;
 642         walk_state->thread = thread;
 643
 644         walk_state->parser_state.start_op = origin;
 645
 646         /* Init the method args/local */
 647
 648 #if (!defined (ACPI_NO_METHOD_EXECUTION) && !defined (ACPI_CONSTANT_EVAL_ONLY))
 649         acpi_ds_method_data_init(walk_state);
 650 #endif
 651
 652         /* Create an initial result stack entry */
 653
 654         status = acpi_ds_result_stack_push(walk_state);
 655         if (ACPI_FAILURE(status)) {
 656                 ACPI_MEM_FREE(walk_state);
 657                 return_PTR(NULL);
 658         }
 659
 660         /* Put the new state at the head of the walk list */
 661
 662         if (thread) {
 663                 acpi_ds_push_walk_state(walk_state, thread);
 664         }
 665
 666         return_PTR(walk_state);
 667 }
 668
 669 /*******************************************************************************
 670  *
 671  * FUNCTION:    acpi_ds_init_aml_walk
 672  *
 673  * PARAMETERS:  walk_state      - New state to be initialized
 674  *              Op              - Current parse op
 675  *              method_node     - Control method NS node, if any
 676  *              aml_start       - Start of AML
 677  *              aml_length      - Length of AML
 678  *              Info            - Method info block (params, etc.)
 679  *              pass_number     - 1, 2, or 3
 680  *
 681  * RETURN:      Status
 682  *
 683  * DESCRIPTION: Initialize a walk state for a pass 1 or 2 parse tree walk
 684  *
 685  ******************************************************************************/
 686
 687 acpi_status
 688 acpi_ds_init_aml_walk(struct acpi_walk_state *walk_state,
 689                       union acpi_parse_object *op,
 690                       struct acpi_namespace_node *method_node,
 691                       u8 * aml_start,
 692                       u32 aml_length,
 693                       struct acpi_parameter_info *info, u8 pass_number)
 694 {
 695         acpi_status status;
 696         struct acpi_parse_state *parser_state = &walk_state->parser_state;
 697         union acpi_parse_object *extra_op;
 698
 699         ACPI_FUNCTION_TRACE("ds_init_aml_walk");
 700
 701         walk_state->parser_state.aml =
 702             walk_state->parser_state.aml_start = aml_start;
 703         walk_state->parser_state.aml_end =
 704             walk_state->parser_state.pkg_end = aml_start + aml_length;
 705
 706         /* The next_op of the next_walk will be the beginning of the method */
 707
 708         walk_state->next_op = NULL;
 709         walk_state->pass_number = pass_number;
 710
 711         if (info) {
 712                 if (info->parameter_type == ACPI_PARAM_GPE) {
 713                         walk_state->gpe_event_info =
 714                             ACPI_CAST_PTR(struct acpi_gpe_event_info,
 715                                           info->parameters);
 716                 } else {
 717                         walk_state->params = info->parameters;
 718                         walk_state->caller_return_desc = &info->return_object;
 719                 }
 720         }
 721
 722         status = acpi_ps_init_scope(&walk_state->parser_state, op);
 723         if (ACPI_FAILURE(status)) {
 724                 return_ACPI_STATUS(status);
 725         }
 726
 727         if (method_node) {
 728                 walk_state->parser_state.start_node = method_node;
 729                 walk_state->walk_type = ACPI_WALK_METHOD;
 730                 walk_state->method_node = method_node;
 731                 walk_state->method_desc =
 732                     acpi_ns_get_attached_object(method_node);
 733
 734                 /* Push start scope on scope stack and make it current  */
 735
 736                 status =
 737                     acpi_ds_scope_stack_push(method_node, ACPI_TYPE_METHOD,
 738                                              walk_state);
 739                 if (ACPI_FAILURE(status)) {
 740                         return_ACPI_STATUS(status);
 741                 }
 742
 743                 /* Init the method arguments */
 744
 745                 status = acpi_ds_method_data_init_args(walk_state->params,
 746                                                        ACPI_METHOD_NUM_ARGS,
 747                                                        walk_state);
 748                 if (ACPI_FAILURE(status)) {
 749                         return_ACPI_STATUS(status);
 750                 }
 751         } else {
 752                 /*
 753                  * Setup the current scope.
 754                  * Find a Named Op that has a namespace node associated with it.
 755                  * search upwards from this Op.  Current scope is the first
 756                  * Op with a namespace node.
 757                  */
 758                 extra_op = parser_state->start_op;
 759                 while (extra_op && !extra_op->common.node) {
 760                         extra_op = extra_op->common.parent;
 761                 }
 762
 763                 if (!extra_op) {
 764                         parser_state->start_node = NULL;
 765                 } else {
 766                         parser_state->start_node = extra_op->common.node;
 767                 }
 768
 769                 if (parser_state->start_node) {
 770                         /* Push start scope on scope stack and make it current  */
 771
 772                         status =
 773                             acpi_ds_scope_stack_push(parser_state->start_node,
 774                                                      parser_state->start_node->
 775                                                      type, walk_state);
 776                         if (ACPI_FAILURE(status)) {
 777                                 return_ACPI_STATUS(status);
 778                         }
 779                 }
 780         }
 781
 782         status = acpi_ds_init_callbacks(walk_state, pass_number);
 783         return_ACPI_STATUS(status);
 784 }
 785
 786 /*******************************************************************************
 787  *
 788  * FUNCTION:    acpi_ds_delete_walk_state
 789  *
 790  * PARAMETERS:  walk_state      - State to delete
 791  *
 792  * RETURN:      Status
 793  *
 794  * DESCRIPTION: Delete a walk state including all internal data structures
 795  *
 796  ******************************************************************************/
 797
 798 void acpi_ds_delete_walk_state(struct acpi_walk_state *walk_state)
 799 {
 800         union acpi_generic_state *state;
 801
 802         ACPI_FUNCTION_TRACE_PTR("ds_delete_walk_state", walk_state);
 803
 804         if (!walk_state) {
 805                 return;
 806         }
 807
 808         if (walk_state->data_type != ACPI_DESC_TYPE_WALK) {
 809                 ACPI_REPORT_ERROR(("%p is not a valid walk state\n",
 810                                    walk_state));
 811                 return;
 812         }
 813
 814         if (walk_state->parser_state.scope) {
 815                 ACPI_REPORT_ERROR(("%p walk still has a scope list\n",
 816                                    walk_state));
 817         }
 818
 819         /* Always must free any linked control states */
 820
 821         while (walk_state->control_state) {
 822                 state = walk_state->control_state;
 823                 walk_state->control_state = state->common.next;
 824
 825                 acpi_ut_delete_generic_state(state);
 826         }
 827
 828         /* Always must free any linked parse states */
 829
 830         while (walk_state->scope_info) {
 831                 state = walk_state->scope_info;
 832                 walk_state->scope_info = state->common.next;
 833
 834                 acpi_ut_delete_generic_state(state);
 835         }
 836
 837         /* Always must free any stacked result states */
 838
 839         while (walk_state->results) {
 840                 state = walk_state->results;
 841                 walk_state->results = state->common.next;
 842
 843                 acpi_ut_delete_generic_state(state);
 844         }
 845
 846         ACPI_MEM_FREE(walk_state);
 847         return_VOID;
 848 }
 849
 850 #ifdef ACPI_OBSOLETE_FUNCTIONS
 851 /*******************************************************************************
 852  *
 853  * FUNCTION:    acpi_ds_result_insert
 854  *
 855  * PARAMETERS:  Object              - Object to push
 856  *              Index               - Where to insert the object
 857  *              walk_state          - Current Walk state
 858  *
 859  * RETURN:      Status
 860  *
 861  * DESCRIPTION: Insert an object onto this walk's result stack
 862  *
 863  ******************************************************************************/
 864
 865 acpi_status
 866 acpi_ds_result_insert(void *object,
 867                       u32 index, struct acpi_walk_state *walk_state)
 868 {
 869         union acpi_generic_state *state;
 870
 871         ACPI_FUNCTION_NAME("ds_result_insert");
 872
 873         state = walk_state->results;
 874         if (!state) {
 875                 ACPI_REPORT_ERROR(("No result object pushed! State=%p\n",
 876                                    walk_state));
 877                 return (AE_NOT_EXIST);
 878         }
 879
 880         if (index >= ACPI_OBJ_NUM_OPERANDS) {
 881                 ACPI_REPORT_ERROR(("Index out of range: %X Obj=%p State=%p Num=%X\n", index, object, walk_state, state->results.num_results));
 882                 return (AE_BAD_PARAMETER);
 883         }
 884
 885         if (!object) {
 886                 ACPI_REPORT_ERROR(("Null Object! Index=%X Obj=%p State=%p Num=%X\n", index, object, walk_state, state->results.num_results));
 887                 return (AE_BAD_PARAMETER);
 888         }
 889
 890         state->results.obj_desc[index] = object;
 891         state->results.num_results++;
 892
 893         ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 894                           "Obj=%p [%s] State=%p Num=%X Cur=%X\n",
 895                           object,
 896                           object ?
 897                           acpi_ut_get_object_type_name((union
 898                                                         acpi_operand_object *)
 899                                                        object) : "NULL",
 900                           walk_state, state->results.num_results,
 901                           walk_state->current_result));
 902
 903         return (AE_OK);
 904 }
 905
 906 /*******************************************************************************
 907  *
 908  * FUNCTION:    acpi_ds_obj_stack_delete_all
 909  *
 910  * PARAMETERS:  walk_state          - Current Walk state
 911  *
 912  * RETURN:      Status
 913  *
 914  * DESCRIPTION: Clear the object stack by deleting all objects that are on it.
 915  *              Should be used with great care, if at all!
 916  *
 917  ******************************************************************************/
 918
 919 acpi_status acpi_ds_obj_stack_delete_all(struct acpi_walk_state * walk_state)
 920 {
 921         u32 i;
 922
 923         ACPI_FUNCTION_TRACE_PTR("ds_obj_stack_delete_all", walk_state);
 924
 925         /* The stack size is configurable, but fixed */
 926
 927         for (i = 0; i < ACPI_OBJ_NUM_OPERANDS; i++) {
 928                 if (walk_state->operands[i]) {
 929                         acpi_ut_remove_reference(walk_state->operands[i]);
 930                         walk_state->operands[i] = NULL;
 931                 }
 932         }
 933
 934         return_ACPI_STATUS(AE_OK);
 935 }
 936
 937 /*******************************************************************************
 938  *
 939  * FUNCTION:    acpi_ds_obj_stack_pop_object
 940  *
 941  * PARAMETERS:  Object              - Where to return the popped object
 942  *              walk_state          - Current Walk state
 943  *
 944  * RETURN:      Status
 945  *
 946  * DESCRIPTION: Pop this walk's object stack.  Objects on the stack are NOT
 947  *              deleted by this routine.
 948  *
 949  ******************************************************************************/
 950
 951 acpi_status
 952 acpi_ds_obj_stack_pop_object(union acpi_operand_object **object,
 953                              struct acpi_walk_state *walk_state)
 954 {
 955         ACPI_FUNCTION_NAME("ds_obj_stack_pop_object");
 956
 957         /* Check for stack underflow */
 958
 959         if (walk_state->num_operands == 0) {
 960                 ACPI_REPORT_ERROR(("Missing operand/stack empty! State=%p #Ops=%X\n", walk_state, walk_state->num_operands));
 961                 *object = NULL;
 962                 return (AE_AML_NO_OPERAND);
 963         }
 964
 965         /* Pop the stack */
 966
 967         walk_state->num_operands--;
 968
 969         /* Check for a valid operand */
 970
 971         if (!walk_state->operands[walk_state->num_operands]) {
 972                 ACPI_REPORT_ERROR(("Null operand! State=%p #Ops=%X\n",
 973                                    walk_state, walk_state->num_operands));
 974                 *object = NULL;
 975                 return (AE_AML_NO_OPERAND);
 976         }
 977
 978         /* Get operand and set stack entry to null */
 979
 980         *object = walk_state->operands[walk_state->num_operands];
 981         walk_state->operands[walk_state->num_operands] = NULL;
 982
 983         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Obj=%p [%s] State=%p #Ops=%X\n",
 984                           *object, acpi_ut_get_object_type_name(*object),
 985                           walk_state, walk_state->num_operands));
 986
 987         return (AE_OK);
 988 }
 989
 990 /*******************************************************************************
 991  *
 992  * FUNCTION:    acpi_ds_obj_stack_get_value
 993  *
 994  * PARAMETERS:  Index               - Stack index whose value is desired.  Based
 995  *                                    on the top of the stack (index=0 == top)
 996  *              walk_state          - Current Walk state
 997  *
 998  * RETURN:      Pointer to the requested operand
 999  *
1000  * DESCRIPTION: Retrieve an object from this walk's operand stack.  Index must
1001  *              be within the range of the current stack pointer.
1002  *
1003  ******************************************************************************/
1004
1005 void *acpi_ds_obj_stack_get_value(u32 index, struct acpi_walk_state *walk_state)
1006 {
1007
1008         ACPI_FUNCTION_TRACE_PTR("ds_obj_stack_get_value", walk_state);
1009
1010         /* Can't do it if the stack is empty */
1011
1012         if (walk_state->num_operands == 0) {
1013                 return_PTR(NULL);
1014         }
1015
1016         /* or if the index is past the top of the stack */
1017
1018         if (index > (walk_state->num_operands - (u32) 1)) {
1019                 return_PTR(NULL);
1020         }
1021
1022         return_PTR(walk_state->
1023                    operands[(acpi_native_uint) (walk_state->num_operands - 1) -
1024                             index]);
1025 }
1026 #endif