Merge tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewsk...
[sfrench/cifs-2.6.git] / drivers / Makefile
1 #
2 # Makefile for the Linux kernel device drivers.
3 #
4 # 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
5 # Rewritten to use lists instead of if-statements.
6 #
7
8 obj-y                           += irqchip/
9 obj-y                           += bus/
10
11 obj-$(CONFIG_GENERIC_PHY)       += phy/
12
13 # GPIO must come after pinctrl as gpios may need to mux pins etc
14 obj-$(CONFIG_PINCTRL)           += pinctrl/
15 obj-$(CONFIG_GPIOLIB)           += gpio/
16 obj-y                           += pwm/
17 obj-$(CONFIG_PCI)               += pci/
18 obj-$(CONFIG_PARISC)            += parisc/
19 obj-$(CONFIG_RAPIDIO)           += rapidio/
20 obj-y                           += video/
21 obj-y                           += idle/
22
23 # IPMI must come before ACPI in order to provide IPMI opregion support
24 obj-$(CONFIG_IPMI_HANDLER)      += char/ipmi/
25
26 obj-$(CONFIG_ACPI)              += acpi/
27 obj-$(CONFIG_SFI)               += sfi/
28 # PnP must come after ACPI since it will eventually need to check if acpi
29 # was used and do nothing if so
30 obj-$(CONFIG_PNP)               += pnp/
31 obj-y                           += amba/
32 # Many drivers will want to use DMA so this has to be made available
33 # really early.
34 obj-$(CONFIG_DMADEVICES)        += dma/
35
36 # SOC specific infrastructure drivers.
37 obj-y                           += soc/
38
39 obj-$(CONFIG_VIRTIO)            += virtio/
40 obj-$(CONFIG_XEN)               += xen/
41
42 # regulators early, since some subsystems rely on them to initialize
43 obj-$(CONFIG_REGULATOR)         += regulator/
44
45 # reset controllers early, since gpu drivers might rely on them to initialize
46 obj-$(CONFIG_RESET_CONTROLLER)  += reset/
47
48 # tty/ comes before char/ so that the VT console is the boot-time
49 # default.
50 obj-y                           += tty/
51 obj-y                           += char/
52
53 # iommu/ comes before gpu as gpu are using iommu controllers
54 obj-$(CONFIG_IOMMU_SUPPORT)     += iommu/
55
56 # gpu/ comes after char for AGP vs DRM startup and after iommu
57 obj-y                           += gpu/
58
59 obj-$(CONFIG_CONNECTOR)         += connector/
60
61 # i810fb and intelfb depend on char/agp/
62 obj-$(CONFIG_FB_I810)           += video/fbdev/i810/
63 obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb/
64
65 obj-$(CONFIG_PARPORT)           += parport/
66 obj-$(CONFIG_NVM)               += lightnvm/
67 obj-y                           += base/ block/ misc/ mfd/ nfc/
68 obj-$(CONFIG_LIBNVDIMM)         += nvdimm/
69 obj-$(CONFIG_DEV_DAX)           += dax/
70 obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
71 obj-$(CONFIG_NUBUS)             += nubus/
72 obj-y                           += macintosh/
73 obj-$(CONFIG_IDE)               += ide/
74 obj-$(CONFIG_SCSI)              += scsi/
75 obj-y                           += nvme/
76 obj-$(CONFIG_ATA)               += ata/
77 obj-$(CONFIG_TARGET_CORE)       += target/
78 obj-$(CONFIG_MTD)               += mtd/
79 obj-$(CONFIG_SPI)               += spi/
80 obj-$(CONFIG_SPMI)              += spmi/
81 obj-y                           += hsi/
82 obj-y                           += net/
83 obj-$(CONFIG_ATM)               += atm/
84 obj-$(CONFIG_FUSION)            += message/
85 obj-y                           += firewire/
86 obj-$(CONFIG_UIO)               += uio/
87 obj-$(CONFIG_VFIO)              += vfio/
88 obj-y                           += cdrom/
89 obj-y                           += auxdisplay/
90 obj-$(CONFIG_PCCARD)            += pcmcia/
91 obj-$(CONFIG_DIO)               += dio/
92 obj-$(CONFIG_SBUS)              += sbus/
93 obj-$(CONFIG_ZORRO)             += zorro/
94 obj-$(CONFIG_ATA_OVER_ETH)      += block/aoe/
95 obj-$(CONFIG_PARIDE)            += block/paride/
96 obj-$(CONFIG_TC)                += tc/
97 obj-$(CONFIG_UWB)               += uwb/
98 obj-$(CONFIG_USB_PHY)           += usb/
99 obj-$(CONFIG_USB)               += usb/
100 obj-$(CONFIG_PCI)               += usb/
101 obj-$(CONFIG_USB_GADGET)        += usb/
102 obj-$(CONFIG_SERIO)             += input/serio/
103 obj-$(CONFIG_GAMEPORT)          += input/gameport/
104 obj-$(CONFIG_INPUT)             += input/
105 obj-$(CONFIG_RTC_LIB)           += rtc/
106 obj-y                           += i2c/ media/
107 obj-$(CONFIG_PPS)               += pps/
108 obj-$(CONFIG_PTP_1588_CLOCK)    += ptp/
109 obj-$(CONFIG_W1)                += w1/
110 obj-y                           += power/
111 obj-$(CONFIG_HWMON)             += hwmon/
112 obj-$(CONFIG_THERMAL)           += thermal/
113 obj-$(CONFIG_WATCHDOG)          += watchdog/
114 obj-$(CONFIG_MD)                += md/
115 obj-$(CONFIG_BT)                += bluetooth/
116 obj-$(CONFIG_ACCESSIBILITY)     += accessibility/
117 obj-$(CONFIG_ISDN)              += isdn/
118 obj-$(CONFIG_EDAC)              += edac/
119 obj-$(CONFIG_EISA)              += eisa/
120 obj-y                           += lguest/
121 obj-$(CONFIG_CPU_FREQ)          += cpufreq/
122 obj-$(CONFIG_CPU_IDLE)          += cpuidle/
123 obj-y                           += mmc/
124 obj-$(CONFIG_MEMSTICK)          += memstick/
125 obj-$(CONFIG_NEW_LEDS)          += leds/
126 obj-$(CONFIG_INFINIBAND)        += infiniband/
127 obj-$(CONFIG_SGI_SN)            += sn/
128 obj-y                           += firmware/
129 obj-$(CONFIG_CRYPTO)            += crypto/
130 obj-$(CONFIG_SUPERH)            += sh/
131 ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
132 obj-y                           += clocksource/
133 endif
134 obj-$(CONFIG_DCA)               += dca/
135 obj-$(CONFIG_HID)               += hid/
136 obj-$(CONFIG_PPC_PS3)           += ps3/
137 obj-$(CONFIG_OF)                += of/
138 obj-$(CONFIG_SSB)               += ssb/
139 obj-$(CONFIG_BCMA)              += bcma/
140 obj-$(CONFIG_VHOST_RING)        += vhost/
141 obj-$(CONFIG_VLYNQ)             += vlynq/
142 obj-$(CONFIG_STAGING)           += staging/
143 obj-y                           += platform/
144 #common clk code
145 obj-y                           += clk/
146
147 obj-$(CONFIG_MAILBOX)           += mailbox/
148 obj-$(CONFIG_HWSPINLOCK)        += hwspinlock/
149 obj-$(CONFIG_REMOTEPROC)        += remoteproc/
150 obj-$(CONFIG_RPMSG)             += rpmsg/
151
152 # Virtualization drivers
153 obj-$(CONFIG_VIRT_DRIVERS)      += virt/
154 obj-$(CONFIG_HYPERV)            += hv/
155
156 obj-$(CONFIG_PM_DEVFREQ)        += devfreq/
157 obj-$(CONFIG_EXTCON)            += extcon/
158 obj-$(CONFIG_MEMORY)            += memory/
159 obj-$(CONFIG_IIO)               += iio/
160 obj-$(CONFIG_VME_BUS)           += vme/
161 obj-$(CONFIG_IPACK_BUS)         += ipack/
162 obj-$(CONFIG_NTB)               += ntb/
163 obj-$(CONFIG_FMC)               += fmc/
164 obj-$(CONFIG_POWERCAP)          += powercap/
165 obj-$(CONFIG_MCB)               += mcb/
166 obj-$(CONFIG_PERF_EVENTS)       += perf/
167 obj-$(CONFIG_RAS)               += ras/
168 obj-$(CONFIG_THUNDERBOLT)       += thunderbolt/
169 obj-$(CONFIG_CORESIGHT)         += hwtracing/coresight/
170 obj-y                           += hwtracing/intel_th/
171 obj-$(CONFIG_STM)               += hwtracing/stm/
172 obj-$(CONFIG_ANDROID)           += android/
173 obj-$(CONFIG_NVMEM)             += nvmem/
174 obj-$(CONFIG_FPGA)              += fpga/