Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
[sfrench/cifs-2.6.git] / arch / x86 / kernel / traps.c
1 /*
2  *  Copyright (C) 1991, 1992  Linus Torvalds
3  *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
4  *
5  *  Pentium III FXSR, SSE support
6  *      Gareth Hughes <gareth@valinux.com>, May 2000
7  */
8
9 /*
10  * Handle hardware traps and faults.
11  */
12 #include <linux/interrupt.h>
13 #include <linux/kallsyms.h>
14 #include <linux/spinlock.h>
15 #include <linux/kprobes.h>
16 #include <linux/uaccess.h>
17 #include <linux/kdebug.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/ptrace.h>
21 #include <linux/string.h>
22 #include <linux/delay.h>
23 #include <linux/errno.h>
24 #include <linux/kexec.h>
25 #include <linux/sched.h>
26 #include <linux/timer.h>
27 #include <linux/init.h>
28 #include <linux/bug.h>
29 #include <linux/nmi.h>
30 #include <linux/mm.h>
31 #include <linux/smp.h>
32 #include <linux/io.h>
33
34 #ifdef CONFIG_EISA
35 #include <linux/ioport.h>
36 #include <linux/eisa.h>
37 #endif
38
39 #ifdef CONFIG_MCA
40 #include <linux/mca.h>
41 #endif
42
43 #if defined(CONFIG_EDAC)
44 #include <linux/edac.h>
45 #endif
46
47 #include <asm/kmemcheck.h>
48 #include <asm/stacktrace.h>
49 #include <asm/processor.h>
50 #include <asm/debugreg.h>
51 #include <asm/atomic.h>
52 #include <asm/system.h>
53 #include <asm/traps.h>
54 #include <asm/desc.h>
55 #include <asm/i387.h>
56 #include <asm/mce.h>
57
58 #include <asm/mach_traps.h>
59
60 #ifdef CONFIG_X86_64
61 #include <asm/x86_init.h>
62 #include <asm/pgalloc.h>
63 #include <asm/proto.h>
64 #else
65 #include <asm/processor-flags.h>
66 #include <asm/setup.h>
67
68 asmlinkage int system_call(void);
69
70 /* Do we ignore FPU interrupts ? */
71 char ignore_fpu_irq;
72
73 /*
74  * The IDT has to be page-aligned to simplify the Pentium
75  * F0 0F bug workaround.
76  */
77 gate_desc idt_table[NR_VECTORS] __page_aligned_data = { { { { 0, 0 } } }, };
78 #endif
79
80 DECLARE_BITMAP(used_vectors, NR_VECTORS);
81 EXPORT_SYMBOL_GPL(used_vectors);
82
83 static int ignore_nmis;
84
85 static inline void conditional_sti(struct pt_regs *regs)
86 {
87         if (regs->flags & X86_EFLAGS_IF)
88                 local_irq_enable();
89 }
90
91 static inline void preempt_conditional_sti(struct pt_regs *regs)
92 {
93         inc_preempt_count();
94         if (regs->flags & X86_EFLAGS_IF)
95                 local_irq_enable();
96 }
97
98 static inline void conditional_cli(struct pt_regs *regs)
99 {
100         if (regs->flags & X86_EFLAGS_IF)
101                 local_irq_disable();
102 }
103
104 static inline void preempt_conditional_cli(struct pt_regs *regs)
105 {
106         if (regs->flags & X86_EFLAGS_IF)
107                 local_irq_disable();
108         dec_preempt_count();
109 }
110
111 #ifdef CONFIG_X86_32
112 static inline void
113 die_if_kernel(const char *str, struct pt_regs *regs, long err)
114 {
115         if (!user_mode_vm(regs))
116                 die(str, regs, err);
117 }
118 #endif
119
120 static void __kprobes
121 do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
122         long error_code, siginfo_t *info)
123 {
124         struct task_struct *tsk = current;
125
126 #ifdef CONFIG_X86_32
127         if (regs->flags & X86_VM_MASK) {
128                 /*
129                  * traps 0, 1, 3, 4, and 5 should be forwarded to vm86.
130                  * On nmi (interrupt 2), do_trap should not be called.
131                  */
132                 if (trapnr < 6)
133                         goto vm86_trap;
134                 goto trap_signal;
135         }
136 #endif
137
138         if (!user_mode(regs))
139                 goto kernel_trap;
140
141 #ifdef CONFIG_X86_32
142 trap_signal:
143 #endif
144         /*
145          * We want error_code and trap_no set for userspace faults and
146          * kernelspace faults which result in die(), but not
147          * kernelspace faults which are fixed up.  die() gives the
148          * process no chance to handle the signal and notice the
149          * kernel fault information, so that won't result in polluting
150          * the information about previously queued, but not yet
151          * delivered, faults.  See also do_general_protection below.
152          */
153         tsk->thread.error_code = error_code;
154         tsk->thread.trap_no = trapnr;
155
156 #ifdef CONFIG_X86_64
157         if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
158             printk_ratelimit()) {
159                 printk(KERN_INFO
160                        "%s[%d] trap %s ip:%lx sp:%lx error:%lx",
161                        tsk->comm, tsk->pid, str,
162                        regs->ip, regs->sp, error_code);
163                 print_vma_addr(" in ", regs->ip);
164                 printk("\n");
165         }
166 #endif
167
168         if (info)
169                 force_sig_info(signr, info, tsk);
170         else
171                 force_sig(signr, tsk);
172         return;
173
174 kernel_trap:
175         if (!fixup_exception(regs)) {
176                 tsk->thread.error_code = error_code;
177                 tsk->thread.trap_no = trapnr;
178                 die(str, regs, error_code);
179         }
180         return;
181
182 #ifdef CONFIG_X86_32
183 vm86_trap:
184         if (handle_vm86_trap((struct kernel_vm86_regs *) regs,
185                                                 error_code, trapnr))
186                 goto trap_signal;
187         return;
188 #endif
189 }
190
191 #define DO_ERROR(trapnr, signr, str, name)                              \
192 dotraplinkage void do_##name(struct pt_regs *regs, long error_code)     \
193 {                                                                       \
194         if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)  \
195                                                         == NOTIFY_STOP) \
196                 return;                                                 \
197         conditional_sti(regs);                                          \
198         do_trap(trapnr, signr, str, regs, error_code, NULL);            \
199 }
200
201 #define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr)         \
202 dotraplinkage void do_##name(struct pt_regs *regs, long error_code)     \
203 {                                                                       \
204         siginfo_t info;                                                 \
205         info.si_signo = signr;                                          \
206         info.si_errno = 0;                                              \
207         info.si_code = sicode;                                          \
208         info.si_addr = (void __user *)siaddr;                           \
209         if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)  \
210                                                         == NOTIFY_STOP) \
211                 return;                                                 \
212         conditional_sti(regs);                                          \
213         do_trap(trapnr, signr, str, regs, error_code, &info);           \
214 }
215
216 DO_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip)
217 DO_ERROR(4, SIGSEGV, "overflow", overflow)
218 DO_ERROR(5, SIGSEGV, "bounds", bounds)
219 DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip)
220 DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
221 DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
222 DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
223 #ifdef CONFIG_X86_32
224 DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
225 #endif
226 DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
227
228 #ifdef CONFIG_X86_64
229 /* Runs on IST stack */
230 dotraplinkage void do_stack_segment(struct pt_regs *regs, long error_code)
231 {
232         if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
233                         12, SIGBUS) == NOTIFY_STOP)
234                 return;
235         preempt_conditional_sti(regs);
236         do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL);
237         preempt_conditional_cli(regs);
238 }
239
240 dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
241 {
242         static const char str[] = "double fault";
243         struct task_struct *tsk = current;
244
245         /* Return not checked because double check cannot be ignored */
246         notify_die(DIE_TRAP, str, regs, error_code, 8, SIGSEGV);
247
248         tsk->thread.error_code = error_code;
249         tsk->thread.trap_no = 8;
250
251         /*
252          * This is always a kernel trap and never fixable (and thus must
253          * never return).
254          */
255         for (;;)
256                 die(str, regs, error_code);
257 }
258 #endif
259
260 dotraplinkage void __kprobes
261 do_general_protection(struct pt_regs *regs, long error_code)
262 {
263         struct task_struct *tsk;
264
265         conditional_sti(regs);
266
267 #ifdef CONFIG_X86_32
268         if (regs->flags & X86_VM_MASK)
269                 goto gp_in_vm86;
270 #endif
271
272         tsk = current;
273         if (!user_mode(regs))
274                 goto gp_in_kernel;
275
276         tsk->thread.error_code = error_code;
277         tsk->thread.trap_no = 13;
278
279         if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
280                         printk_ratelimit()) {
281                 printk(KERN_INFO
282                         "%s[%d] general protection ip:%lx sp:%lx error:%lx",
283                         tsk->comm, task_pid_nr(tsk),
284                         regs->ip, regs->sp, error_code);
285                 print_vma_addr(" in ", regs->ip);
286                 printk("\n");
287         }
288
289         force_sig(SIGSEGV, tsk);
290         return;
291
292 #ifdef CONFIG_X86_32
293 gp_in_vm86:
294         local_irq_enable();
295         handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code);
296         return;
297 #endif
298
299 gp_in_kernel:
300         if (fixup_exception(regs))
301                 return;
302
303         tsk->thread.error_code = error_code;
304         tsk->thread.trap_no = 13;
305         if (notify_die(DIE_GPF, "general protection fault", regs,
306                                 error_code, 13, SIGSEGV) == NOTIFY_STOP)
307                 return;
308         die("general protection fault", regs, error_code);
309 }
310
311 static notrace __kprobes void
312 mem_parity_error(unsigned char reason, struct pt_regs *regs)
313 {
314         printk(KERN_EMERG
315                 "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
316                         reason, smp_processor_id());
317
318         printk(KERN_EMERG
319                 "You have some hardware problem, likely on the PCI bus.\n");
320
321 #if defined(CONFIG_EDAC)
322         if (edac_handler_set()) {
323                 edac_atomic_assert_error();
324                 return;
325         }
326 #endif
327
328         if (panic_on_unrecovered_nmi)
329                 panic("NMI: Not continuing");
330
331         printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
332
333         /* Clear and disable the memory parity error line. */
334         reason = (reason & 0xf) | 4;
335         outb(reason, 0x61);
336 }
337
338 static notrace __kprobes void
339 io_check_error(unsigned char reason, struct pt_regs *regs)
340 {
341         unsigned long i;
342
343         printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
344         show_registers(regs);
345
346         if (panic_on_io_nmi)
347                 panic("NMI IOCK error: Not continuing");
348
349         /* Re-enable the IOCK line, wait for a few seconds */
350         reason = (reason & 0xf) | 8;
351         outb(reason, 0x61);
352
353         i = 2000;
354         while (--i)
355                 udelay(1000);
356
357         reason &= ~8;
358         outb(reason, 0x61);
359 }
360
361 static notrace __kprobes void
362 unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
363 {
364         if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) ==
365                         NOTIFY_STOP)
366                 return;
367 #ifdef CONFIG_MCA
368         /*
369          * Might actually be able to figure out what the guilty party
370          * is:
371          */
372         if (MCA_bus) {
373                 mca_handle_nmi();
374                 return;
375         }
376 #endif
377         printk(KERN_EMERG
378                 "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
379                         reason, smp_processor_id());
380
381         printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
382         if (panic_on_unrecovered_nmi)
383                 panic("NMI: Not continuing");
384
385         printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
386 }
387
388 static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
389 {
390         unsigned char reason = 0;
391         int cpu;
392
393         cpu = smp_processor_id();
394
395         /* Only the BSP gets external NMIs from the system. */
396         if (!cpu)
397                 reason = get_nmi_reason();
398
399         if (!(reason & 0xc0)) {
400                 if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
401                                                                 == NOTIFY_STOP)
402                         return;
403 #ifdef CONFIG_X86_LOCAL_APIC
404                 /*
405                  * Ok, so this is none of the documented NMI sources,
406                  * so it must be the NMI watchdog.
407                  */
408                 if (nmi_watchdog_tick(regs, reason))
409                         return;
410                 if (!do_nmi_callback(regs, cpu))
411                         unknown_nmi_error(reason, regs);
412 #else
413                 unknown_nmi_error(reason, regs);
414 #endif
415
416                 return;
417         }
418         if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
419                 return;
420
421         /* AK: following checks seem to be broken on modern chipsets. FIXME */
422         if (reason & 0x80)
423                 mem_parity_error(reason, regs);
424         if (reason & 0x40)
425                 io_check_error(reason, regs);
426 #ifdef CONFIG_X86_32
427         /*
428          * Reassert NMI in case it became active meanwhile
429          * as it's edge-triggered:
430          */
431         reassert_nmi();
432 #endif
433 }
434
435 dotraplinkage notrace __kprobes void
436 do_nmi(struct pt_regs *regs, long error_code)
437 {
438         nmi_enter();
439
440         inc_irq_stat(__nmi_count);
441
442         if (!ignore_nmis)
443                 default_do_nmi(regs);
444
445         nmi_exit();
446 }
447
448 void stop_nmi(void)
449 {
450         acpi_nmi_disable();
451         ignore_nmis++;
452 }
453
454 void restart_nmi(void)
455 {
456         ignore_nmis--;
457         acpi_nmi_enable();
458 }
459
460 /* May run on IST stack. */
461 dotraplinkage void __kprobes do_int3(struct pt_regs *regs, long error_code)
462 {
463 #ifdef CONFIG_KPROBES
464         if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
465                         == NOTIFY_STOP)
466                 return;
467 #else
468         if (notify_die(DIE_TRAP, "int3", regs, error_code, 3, SIGTRAP)
469                         == NOTIFY_STOP)
470                 return;
471 #endif
472
473         preempt_conditional_sti(regs);
474         do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
475         preempt_conditional_cli(regs);
476 }
477
478 #ifdef CONFIG_X86_64
479 /*
480  * Help handler running on IST stack to switch back to user stack
481  * for scheduling or signal handling. The actual stack switch is done in
482  * entry.S
483  */
484 asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
485 {
486         struct pt_regs *regs = eregs;
487         /* Did already sync */
488         if (eregs == (struct pt_regs *)eregs->sp)
489                 ;
490         /* Exception from user space */
491         else if (user_mode(eregs))
492                 regs = task_pt_regs(current);
493         /*
494          * Exception from kernel and interrupts are enabled. Move to
495          * kernel process stack.
496          */
497         else if (eregs->flags & X86_EFLAGS_IF)
498                 regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs));
499         if (eregs != regs)
500                 *regs = *eregs;
501         return regs;
502 }
503 #endif
504
505 /*
506  * Our handling of the processor debug registers is non-trivial.
507  * We do not clear them on entry and exit from the kernel. Therefore
508  * it is possible to get a watchpoint trap here from inside the kernel.
509  * However, the code in ./ptrace.c has ensured that the user can
510  * only set watchpoints on userspace addresses. Therefore the in-kernel
511  * watchpoint trap can only occur in code which is reading/writing
512  * from user space. Such code must not hold kernel locks (since it
513  * can equally take a page fault), therefore it is safe to call
514  * force_sig_info even though that claims and releases locks.
515  *
516  * Code in ./signal.c ensures that the debug control register
517  * is restored before we deliver any signal, and therefore that
518  * user code runs with the correct debug control register even though
519  * we clear it here.
520  *
521  * Being careful here means that we don't have to be as careful in a
522  * lot of more complicated places (task switching can be a bit lazy
523  * about restoring all the debug state, and ptrace doesn't have to
524  * find every occurrence of the TF bit that could be saved away even
525  * by user code)
526  *
527  * May run on IST stack.
528  */
529 dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
530 {
531         struct task_struct *tsk = current;
532         unsigned long dr6;
533         int si_code;
534
535         get_debugreg(dr6, 6);
536
537         /* Filter out all the reserved bits which are preset to 1 */
538         dr6 &= ~DR6_RESERVED;
539
540         /* Catch kmemcheck conditions first of all! */
541         if ((dr6 & DR_STEP) && kmemcheck_trap(regs))
542                 return;
543
544         /* DR6 may or may not be cleared by the CPU */
545         set_debugreg(0, 6);
546         /*
547          * The processor cleared BTF, so don't mark that we need it set.
548          */
549         clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR);
550         tsk->thread.debugctlmsr = 0;
551
552         /* Store the virtualized DR6 value */
553         tsk->thread.debugreg6 = dr6;
554
555         if (notify_die(DIE_DEBUG, "debug", regs, PTR_ERR(&dr6), error_code,
556                                                         SIGTRAP) == NOTIFY_STOP)
557                 return;
558
559         /* It's safe to allow irq's after DR6 has been saved */
560         preempt_conditional_sti(regs);
561
562         if (regs->flags & X86_VM_MASK) {
563                 handle_vm86_trap((struct kernel_vm86_regs *) regs,
564                                 error_code, 1);
565                 return;
566         }
567
568         /*
569          * Single-stepping through system calls: ignore any exceptions in
570          * kernel space, but re-enable TF when returning to user mode.
571          *
572          * We already checked v86 mode above, so we can check for kernel mode
573          * by just checking the CPL of CS.
574          */
575         if ((dr6 & DR_STEP) && !user_mode(regs)) {
576                 tsk->thread.debugreg6 &= ~DR_STEP;
577                 set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
578                 regs->flags &= ~X86_EFLAGS_TF;
579         }
580         si_code = get_si_code(tsk->thread.debugreg6);
581         if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS))
582                 send_sigtrap(tsk, regs, error_code, si_code);
583         preempt_conditional_cli(regs);
584
585         return;
586 }
587
588 #ifdef CONFIG_X86_64
589 static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
590 {
591         if (fixup_exception(regs))
592                 return 1;
593
594         notify_die(DIE_GPF, str, regs, 0, trapnr, SIGFPE);
595         /* Illegal floating point operation in the kernel */
596         current->thread.trap_no = trapnr;
597         die(str, regs, 0);
598         return 0;
599 }
600 #endif
601
602 /*
603  * Note that we play around with the 'TS' bit in an attempt to get
604  * the correct behaviour even in the presence of the asynchronous
605  * IRQ13 behaviour
606  */
607 void math_error(void __user *ip)
608 {
609         struct task_struct *task;
610         siginfo_t info;
611         unsigned short cwd, swd, err;
612
613         /*
614          * Save the info for the exception handler and clear the error.
615          */
616         task = current;
617         save_init_fpu(task);
618         task->thread.trap_no = 16;
619         task->thread.error_code = 0;
620         info.si_signo = SIGFPE;
621         info.si_errno = 0;
622         info.si_addr = ip;
623         /*
624          * (~cwd & swd) will mask out exceptions that are not set to unmasked
625          * status.  0x3f is the exception bits in these regs, 0x200 is the
626          * C1 reg you need in case of a stack fault, 0x040 is the stack
627          * fault bit.  We should only be taking one exception at a time,
628          * so if this combination doesn't produce any single exception,
629          * then we have a bad program that isn't synchronizing its FPU usage
630          * and it will suffer the consequences since we won't be able to
631          * fully reproduce the context of the exception
632          */
633         cwd = get_fpu_cwd(task);
634         swd = get_fpu_swd(task);
635
636         err = swd & ~cwd;
637
638         if (err & 0x001) {      /* Invalid op */
639                 /*
640                  * swd & 0x240 == 0x040: Stack Underflow
641                  * swd & 0x240 == 0x240: Stack Overflow
642                  * User must clear the SF bit (0x40) if set
643                  */
644                 info.si_code = FPE_FLTINV;
645         } else if (err & 0x004) { /* Divide by Zero */
646                 info.si_code = FPE_FLTDIV;
647         } else if (err & 0x008) { /* Overflow */
648                 info.si_code = FPE_FLTOVF;
649         } else if (err & 0x012) { /* Denormal, Underflow */
650                 info.si_code = FPE_FLTUND;
651         } else if (err & 0x020) { /* Precision */
652                 info.si_code = FPE_FLTRES;
653         } else {
654                 /*
655                  * If we're using IRQ 13, or supposedly even some trap 16
656                  * implementations, it's possible we get a spurious trap...
657                  */
658                 return;         /* Spurious trap, no error */
659         }
660         force_sig_info(SIGFPE, &info, task);
661 }
662
663 dotraplinkage void do_coprocessor_error(struct pt_regs *regs, long error_code)
664 {
665         conditional_sti(regs);
666
667 #ifdef CONFIG_X86_32
668         ignore_fpu_irq = 1;
669 #else
670         if (!user_mode(regs) &&
671             kernel_math_error(regs, "kernel x87 math error", 16))
672                 return;
673 #endif
674
675         math_error((void __user *)regs->ip);
676 }
677
678 static void simd_math_error(void __user *ip)
679 {
680         struct task_struct *task;
681         siginfo_t info;
682         unsigned short mxcsr;
683
684         /*
685          * Save the info for the exception handler and clear the error.
686          */
687         task = current;
688         save_init_fpu(task);
689         task->thread.trap_no = 19;
690         task->thread.error_code = 0;
691         info.si_signo = SIGFPE;
692         info.si_errno = 0;
693         info.si_code = __SI_FAULT;
694         info.si_addr = ip;
695         /*
696          * The SIMD FPU exceptions are handled a little differently, as there
697          * is only a single status/control register.  Thus, to determine which
698          * unmasked exception was caught we must mask the exception mask bits
699          * at 0x1f80, and then use these to mask the exception bits at 0x3f.
700          */
701         mxcsr = get_fpu_mxcsr(task);
702         switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
703         case 0x000:
704         default:
705                 break;
706         case 0x001: /* Invalid Op */
707                 info.si_code = FPE_FLTINV;
708                 break;
709         case 0x002: /* Denormalize */
710         case 0x010: /* Underflow */
711                 info.si_code = FPE_FLTUND;
712                 break;
713         case 0x004: /* Zero Divide */
714                 info.si_code = FPE_FLTDIV;
715                 break;
716         case 0x008: /* Overflow */
717                 info.si_code = FPE_FLTOVF;
718                 break;
719         case 0x020: /* Precision */
720                 info.si_code = FPE_FLTRES;
721                 break;
722         }
723         force_sig_info(SIGFPE, &info, task);
724 }
725
726 dotraplinkage void
727 do_simd_coprocessor_error(struct pt_regs *regs, long error_code)
728 {
729         conditional_sti(regs);
730
731 #ifdef CONFIG_X86_32
732         if (cpu_has_xmm) {
733                 /* Handle SIMD FPU exceptions on PIII+ processors. */
734                 ignore_fpu_irq = 1;
735                 simd_math_error((void __user *)regs->ip);
736                 return;
737         }
738         /*
739          * Handle strange cache flush from user space exception
740          * in all other cases.  This is undocumented behaviour.
741          */
742         if (regs->flags & X86_VM_MASK) {
743                 handle_vm86_fault((struct kernel_vm86_regs *)regs, error_code);
744                 return;
745         }
746         current->thread.trap_no = 19;
747         current->thread.error_code = error_code;
748         die_if_kernel("cache flush denied", regs, error_code);
749         force_sig(SIGSEGV, current);
750 #else
751         if (!user_mode(regs) &&
752                         kernel_math_error(regs, "kernel simd math error", 19))
753                 return;
754         simd_math_error((void __user *)regs->ip);
755 #endif
756 }
757
758 dotraplinkage void
759 do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
760 {
761         conditional_sti(regs);
762 #if 0
763         /* No need to warn about this any longer. */
764         printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
765 #endif
766 }
767
768 asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
769 {
770 }
771
772 asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void)
773 {
774 }
775
776 /*
777  * __math_state_restore assumes that cr0.TS is already clear and the
778  * fpu state is all ready for use.  Used during context switch.
779  */
780 void __math_state_restore(void)
781 {
782         struct thread_info *thread = current_thread_info();
783         struct task_struct *tsk = thread->task;
784
785         /*
786          * Paranoid restore. send a SIGSEGV if we fail to restore the state.
787          */
788         if (unlikely(restore_fpu_checking(tsk))) {
789                 stts();
790                 force_sig(SIGSEGV, tsk);
791                 return;
792         }
793
794         thread->status |= TS_USEDFPU;   /* So we fnsave on switch_to() */
795         tsk->fpu_counter++;
796 }
797
798 /*
799  * 'math_state_restore()' saves the current math information in the
800  * old math state array, and gets the new ones from the current task
801  *
802  * Careful.. There are problems with IBM-designed IRQ13 behaviour.
803  * Don't touch unless you *really* know how it works.
804  *
805  * Must be called with kernel preemption disabled (in this case,
806  * local interrupts are disabled at the call-site in entry.S).
807  */
808 asmlinkage void math_state_restore(void)
809 {
810         struct thread_info *thread = current_thread_info();
811         struct task_struct *tsk = thread->task;
812
813         if (!tsk_used_math(tsk)) {
814                 local_irq_enable();
815                 /*
816                  * does a slab alloc which can sleep
817                  */
818                 if (init_fpu(tsk)) {
819                         /*
820                          * ran out of memory!
821                          */
822                         do_group_exit(SIGKILL);
823                         return;
824                 }
825                 local_irq_disable();
826         }
827
828         clts();                         /* Allow maths ops (or we recurse) */
829
830         __math_state_restore();
831 }
832 EXPORT_SYMBOL_GPL(math_state_restore);
833
834 #ifndef CONFIG_MATH_EMULATION
835 void math_emulate(struct math_emu_info *info)
836 {
837         printk(KERN_EMERG
838                 "math-emulation not enabled and no coprocessor found.\n");
839         printk(KERN_EMERG "killing %s.\n", current->comm);
840         force_sig(SIGFPE, current);
841         schedule();
842 }
843 #endif /* CONFIG_MATH_EMULATION */
844
845 dotraplinkage void __kprobes
846 do_device_not_available(struct pt_regs *regs, long error_code)
847 {
848 #ifdef CONFIG_X86_32
849         if (read_cr0() & X86_CR0_EM) {
850                 struct math_emu_info info = { };
851
852                 conditional_sti(regs);
853
854                 info.regs = regs;
855                 math_emulate(&info);
856         } else {
857                 math_state_restore(); /* interrupts still off */
858                 conditional_sti(regs);
859         }
860 #else
861         math_state_restore();
862 #endif
863 }
864
865 #ifdef CONFIG_X86_32
866 dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
867 {
868         siginfo_t info;
869         local_irq_enable();
870
871         info.si_signo = SIGILL;
872         info.si_errno = 0;
873         info.si_code = ILL_BADSTK;
874         info.si_addr = NULL;
875         if (notify_die(DIE_TRAP, "iret exception",
876                         regs, error_code, 32, SIGILL) == NOTIFY_STOP)
877                 return;
878         do_trap(32, SIGILL, "iret exception", regs, error_code, &info);
879 }
880 #endif
881
882 void __init trap_init(void)
883 {
884         int i;
885
886 #ifdef CONFIG_EISA
887         void __iomem *p = early_ioremap(0x0FFFD9, 4);
888
889         if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
890                 EISA_bus = 1;
891         early_iounmap(p, 4);
892 #endif
893
894         set_intr_gate(0, &divide_error);
895         set_intr_gate_ist(1, &debug, DEBUG_STACK);
896         set_intr_gate_ist(2, &nmi, NMI_STACK);
897         /* int3 can be called from all */
898         set_system_intr_gate_ist(3, &int3, DEBUG_STACK);
899         /* int4 can be called from all */
900         set_system_intr_gate(4, &overflow);
901         set_intr_gate(5, &bounds);
902         set_intr_gate(6, &invalid_op);
903         set_intr_gate(7, &device_not_available);
904 #ifdef CONFIG_X86_32
905         set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS);
906 #else
907         set_intr_gate_ist(8, &double_fault, DOUBLEFAULT_STACK);
908 #endif
909         set_intr_gate(9, &coprocessor_segment_overrun);
910         set_intr_gate(10, &invalid_TSS);
911         set_intr_gate(11, &segment_not_present);
912         set_intr_gate_ist(12, &stack_segment, STACKFAULT_STACK);
913         set_intr_gate(13, &general_protection);
914         set_intr_gate(14, &page_fault);
915         set_intr_gate(15, &spurious_interrupt_bug);
916         set_intr_gate(16, &coprocessor_error);
917         set_intr_gate(17, &alignment_check);
918 #ifdef CONFIG_X86_MCE
919         set_intr_gate_ist(18, &machine_check, MCE_STACK);
920 #endif
921         set_intr_gate(19, &simd_coprocessor_error);
922
923         /* Reserve all the builtin and the syscall vector: */
924         for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
925                 set_bit(i, used_vectors);
926
927 #ifdef CONFIG_IA32_EMULATION
928         set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
929         set_bit(IA32_SYSCALL_VECTOR, used_vectors);
930 #endif
931
932 #ifdef CONFIG_X86_32
933         if (cpu_has_fxsr) {
934                 printk(KERN_INFO "Enabling fast FPU save and restore... ");
935                 set_in_cr4(X86_CR4_OSFXSR);
936                 printk("done.\n");
937         }
938         if (cpu_has_xmm) {
939                 printk(KERN_INFO
940                         "Enabling unmasked SIMD FPU exception support... ");
941                 set_in_cr4(X86_CR4_OSXMMEXCPT);
942                 printk("done.\n");
943         }
944
945         set_system_trap_gate(SYSCALL_VECTOR, &system_call);
946         set_bit(SYSCALL_VECTOR, used_vectors);
947 #endif
948
949         /*
950          * Should be a barrier for any external CPU state:
951          */
952         cpu_init();
953
954         x86_init.irqs.trap_init();
955 }