x86: use not_pci bitmap #2
[sfrench/cifs-2.6.git] / arch / x86 / kernel / io_apic_32.c
1 /*
2  *      Intel IO-APIC support for multi-Pentium hosts.
3  *
4  *      Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
5  *
6  *      Many thanks to Stig Venaas for trying out countless experimental
7  *      patches and reporting/debugging problems patiently!
8  *
9  *      (c) 1999, Multiple IO-APIC support, developed by
10  *      Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
11  *      Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
12  *      further tested and cleaned up by Zach Brown <zab@redhat.com>
13  *      and Ingo Molnar <mingo@redhat.com>
14  *
15  *      Fixes
16  *      Maciej W. Rozycki       :       Bits for genuine 82489DX APICs;
17  *                                      thanks to Eric Gilmore
18  *                                      and Rolf G. Tews
19  *                                      for testing these extensively
20  *      Paul Diefenbaugh        :       Added full ACPI support
21  */
22
23 #include <linux/mm.h>
24 #include <linux/interrupt.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/sched.h>
28 #include <linux/mc146818rtc.h>
29 #include <linux/compiler.h>
30 #include <linux/acpi.h>
31 #include <linux/module.h>
32 #include <linux/sysdev.h>
33 #include <linux/pci.h>
34 #include <linux/msi.h>
35 #include <linux/htirq.h>
36 #include <linux/freezer.h>
37 #include <linux/kthread.h>
38 #include <linux/jiffies.h>      /* time_after() */
39
40 #include <asm/io.h>
41 #include <asm/smp.h>
42 #include <asm/desc.h>
43 #include <asm/timer.h>
44 #include <asm/i8259.h>
45 #include <asm/nmi.h>
46 #include <asm/msidef.h>
47 #include <asm/hypertransport.h>
48
49 #include <mach_apic.h>
50 #include <mach_apicdef.h>
51
52 int (*ioapic_renumber_irq)(int ioapic, int irq);
53 atomic_t irq_mis_count;
54
55 /* Where if anywhere is the i8259 connect in external int mode */
56 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
57
58 static DEFINE_SPINLOCK(ioapic_lock);
59 static DEFINE_SPINLOCK(vector_lock);
60
61 int timer_over_8254 __initdata = 1;
62
63 /*
64  *      Is the SiS APIC rmw bug present ?
65  *      -1 = don't know, 0 = no, 1 = yes
66  */
67 int sis_apic_bug = -1;
68
69 /*
70  * # of IRQ routing registers
71  */
72 int nr_ioapic_registers[MAX_IO_APICS];
73
74 static int disable_timer_pin_1 __initdata;
75
76 /*
77  * Rough estimation of how many shared IRQs there are, can
78  * be changed anytime.
79  */
80 #define MAX_PLUS_SHARED_IRQS NR_IRQS
81 #define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
82
83 /*
84  * This is performance-critical, we want to do it O(1)
85  *
86  * the indexing order of this array favors 1:1 mappings
87  * between pins and IRQs.
88  */
89
90 static struct irq_pin_list {
91         int apic, pin, next;
92 } irq_2_pin[PIN_MAP_SIZE];
93
94 struct io_apic {
95         unsigned int index;
96         unsigned int unused[3];
97         unsigned int data;
98 };
99
100 static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
101 {
102         return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
103                 + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
104 }
105
106 static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
107 {
108         struct io_apic __iomem *io_apic = io_apic_base(apic);
109         writel(reg, &io_apic->index);
110         return readl(&io_apic->data);
111 }
112
113 static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
114 {
115         struct io_apic __iomem *io_apic = io_apic_base(apic);
116         writel(reg, &io_apic->index);
117         writel(value, &io_apic->data);
118 }
119
120 /*
121  * Re-write a value: to be used for read-modify-write
122  * cycles where the read already set up the index register.
123  *
124  * Older SiS APIC requires we rewrite the index register
125  */
126 static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
127 {
128         volatile struct io_apic __iomem *io_apic = io_apic_base(apic);
129         if (sis_apic_bug)
130                 writel(reg, &io_apic->index);
131         writel(value, &io_apic->data);
132 }
133
134 union entry_union {
135         struct { u32 w1, w2; };
136         struct IO_APIC_route_entry entry;
137 };
138
139 static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
140 {
141         union entry_union eu;
142         unsigned long flags;
143         spin_lock_irqsave(&ioapic_lock, flags);
144         eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
145         eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
146         spin_unlock_irqrestore(&ioapic_lock, flags);
147         return eu.entry;
148 }
149
150 /*
151  * When we write a new IO APIC routing entry, we need to write the high
152  * word first! If the mask bit in the low word is clear, we will enable
153  * the interrupt, and we need to make sure the entry is fully populated
154  * before that happens.
155  */
156 static void
157 __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
158 {
159         union entry_union eu;
160         eu.entry = e;
161         io_apic_write(apic, 0x11 + 2*pin, eu.w2);
162         io_apic_write(apic, 0x10 + 2*pin, eu.w1);
163 }
164
165 static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
166 {
167         unsigned long flags;
168         spin_lock_irqsave(&ioapic_lock, flags);
169         __ioapic_write_entry(apic, pin, e);
170         spin_unlock_irqrestore(&ioapic_lock, flags);
171 }
172
173 /*
174  * When we mask an IO APIC routing entry, we need to write the low
175  * word first, in order to set the mask bit before we change the
176  * high bits!
177  */
178 static void ioapic_mask_entry(int apic, int pin)
179 {
180         unsigned long flags;
181         union entry_union eu = { .entry.mask = 1 };
182
183         spin_lock_irqsave(&ioapic_lock, flags);
184         io_apic_write(apic, 0x10 + 2*pin, eu.w1);
185         io_apic_write(apic, 0x11 + 2*pin, eu.w2);
186         spin_unlock_irqrestore(&ioapic_lock, flags);
187 }
188
189 /*
190  * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
191  * shared ISA-space IRQs, so we have to support them. We are super
192  * fast in the common case, and fast for shared ISA-space IRQs.
193  */
194 static void add_pin_to_irq(unsigned int irq, int apic, int pin)
195 {
196         static int first_free_entry = NR_IRQS;
197         struct irq_pin_list *entry = irq_2_pin + irq;
198
199         while (entry->next)
200                 entry = irq_2_pin + entry->next;
201
202         if (entry->pin != -1) {
203                 entry->next = first_free_entry;
204                 entry = irq_2_pin + entry->next;
205                 if (++first_free_entry >= PIN_MAP_SIZE)
206                         panic("io_apic.c: whoops");
207         }
208         entry->apic = apic;
209         entry->pin = pin;
210 }
211
212 /*
213  * Reroute an IRQ to a different pin.
214  */
215 static void __init replace_pin_at_irq(unsigned int irq,
216                                       int oldapic, int oldpin,
217                                       int newapic, int newpin)
218 {
219         struct irq_pin_list *entry = irq_2_pin + irq;
220
221         while (1) {
222                 if (entry->apic == oldapic && entry->pin == oldpin) {
223                         entry->apic = newapic;
224                         entry->pin = newpin;
225                 }
226                 if (!entry->next)
227                         break;
228                 entry = irq_2_pin + entry->next;
229         }
230 }
231
232 static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable)
233 {
234         struct irq_pin_list *entry = irq_2_pin + irq;
235         unsigned int pin, reg;
236
237         for (;;) {
238                 pin = entry->pin;
239                 if (pin == -1)
240                         break;
241                 reg = io_apic_read(entry->apic, 0x10 + pin*2);
242                 reg &= ~disable;
243                 reg |= enable;
244                 io_apic_modify(entry->apic, 0x10 + pin*2, reg);
245                 if (!entry->next)
246                         break;
247                 entry = irq_2_pin + entry->next;
248         }
249 }
250
251 /* mask = 1 */
252 static void __mask_IO_APIC_irq (unsigned int irq)
253 {
254         __modify_IO_APIC_irq(irq, 0x00010000, 0);
255 }
256
257 /* mask = 0 */
258 static void __unmask_IO_APIC_irq (unsigned int irq)
259 {
260         __modify_IO_APIC_irq(irq, 0, 0x00010000);
261 }
262
263 /* mask = 1, trigger = 0 */
264 static void __mask_and_edge_IO_APIC_irq (unsigned int irq)
265 {
266         __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000);
267 }
268
269 /* mask = 0, trigger = 1 */
270 static void __unmask_and_level_IO_APIC_irq (unsigned int irq)
271 {
272         __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000);
273 }
274
275 static void mask_IO_APIC_irq (unsigned int irq)
276 {
277         unsigned long flags;
278
279         spin_lock_irqsave(&ioapic_lock, flags);
280         __mask_IO_APIC_irq(irq);
281         spin_unlock_irqrestore(&ioapic_lock, flags);
282 }
283
284 static void unmask_IO_APIC_irq (unsigned int irq)
285 {
286         unsigned long flags;
287
288         spin_lock_irqsave(&ioapic_lock, flags);
289         __unmask_IO_APIC_irq(irq);
290         spin_unlock_irqrestore(&ioapic_lock, flags);
291 }
292
293 static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
294 {
295         struct IO_APIC_route_entry entry;
296         
297         /* Check delivery_mode to be sure we're not clearing an SMI pin */
298         entry = ioapic_read_entry(apic, pin);
299         if (entry.delivery_mode == dest_SMI)
300                 return;
301
302         /*
303          * Disable it in the IO-APIC irq-routing table:
304          */
305         ioapic_mask_entry(apic, pin);
306 }
307
308 static void clear_IO_APIC (void)
309 {
310         int apic, pin;
311
312         for (apic = 0; apic < nr_ioapics; apic++)
313                 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
314                         clear_IO_APIC_pin(apic, pin);
315 }
316
317 #ifdef CONFIG_SMP
318 static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
319 {
320         unsigned long flags;
321         int pin;
322         struct irq_pin_list *entry = irq_2_pin + irq;
323         unsigned int apicid_value;
324         cpumask_t tmp;
325         
326         cpus_and(tmp, cpumask, cpu_online_map);
327         if (cpus_empty(tmp))
328                 tmp = TARGET_CPUS;
329
330         cpus_and(cpumask, tmp, CPU_MASK_ALL);
331
332         apicid_value = cpu_mask_to_apicid(cpumask);
333         /* Prepare to do the io_apic_write */
334         apicid_value = apicid_value << 24;
335         spin_lock_irqsave(&ioapic_lock, flags);
336         for (;;) {
337                 pin = entry->pin;
338                 if (pin == -1)
339                         break;
340                 io_apic_write(entry->apic, 0x10 + 1 + pin*2, apicid_value);
341                 if (!entry->next)
342                         break;
343                 entry = irq_2_pin + entry->next;
344         }
345         irq_desc[irq].affinity = cpumask;
346         spin_unlock_irqrestore(&ioapic_lock, flags);
347 }
348
349 #if defined(CONFIG_IRQBALANCE)
350 # include <asm/processor.h>     /* kernel_thread() */
351 # include <linux/kernel_stat.h> /* kstat */
352 # include <linux/slab.h>                /* kmalloc() */
353 # include <linux/timer.h>
354  
355 #define IRQBALANCE_CHECK_ARCH -999
356 #define MAX_BALANCED_IRQ_INTERVAL       (5*HZ)
357 #define MIN_BALANCED_IRQ_INTERVAL       (HZ/2)
358 #define BALANCED_IRQ_MORE_DELTA         (HZ/10)
359 #define BALANCED_IRQ_LESS_DELTA         (HZ)
360
361 static int irqbalance_disabled __read_mostly = IRQBALANCE_CHECK_ARCH;
362 static int physical_balance __read_mostly;
363 static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL;
364
365 static struct irq_cpu_info {
366         unsigned long * last_irq;
367         unsigned long * irq_delta;
368         unsigned long irq;
369 } irq_cpu_data[NR_CPUS];
370
371 #define CPU_IRQ(cpu)            (irq_cpu_data[cpu].irq)
372 #define LAST_CPU_IRQ(cpu,irq)   (irq_cpu_data[cpu].last_irq[irq])
373 #define IRQ_DELTA(cpu,irq)      (irq_cpu_data[cpu].irq_delta[irq])
374
375 #define IDLE_ENOUGH(cpu,now) \
376         (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1))
377
378 #define IRQ_ALLOWED(cpu, allowed_mask)  cpu_isset(cpu, allowed_mask)
379
380 #define CPU_TO_PACKAGEINDEX(i) (first_cpu(per_cpu(cpu_sibling_map, i)))
381
382 static cpumask_t balance_irq_affinity[NR_IRQS] = {
383         [0 ... NR_IRQS-1] = CPU_MASK_ALL
384 };
385
386 void set_balance_irq_affinity(unsigned int irq, cpumask_t mask)
387 {
388         balance_irq_affinity[irq] = mask;
389 }
390
391 static unsigned long move(int curr_cpu, cpumask_t allowed_mask,
392                         unsigned long now, int direction)
393 {
394         int search_idle = 1;
395         int cpu = curr_cpu;
396
397         goto inside;
398
399         do {
400                 if (unlikely(cpu == curr_cpu))
401                         search_idle = 0;
402 inside:
403                 if (direction == 1) {
404                         cpu++;
405                         if (cpu >= NR_CPUS)
406                                 cpu = 0;
407                 } else {
408                         cpu--;
409                         if (cpu == -1)
410                                 cpu = NR_CPUS-1;
411                 }
412         } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) ||
413                         (search_idle && !IDLE_ENOUGH(cpu,now)));
414
415         return cpu;
416 }
417
418 static inline void balance_irq(int cpu, int irq)
419 {
420         unsigned long now = jiffies;
421         cpumask_t allowed_mask;
422         unsigned int new_cpu;
423                 
424         if (irqbalance_disabled)
425                 return; 
426
427         cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]);
428         new_cpu = move(cpu, allowed_mask, now, 1);
429         if (cpu != new_cpu) {
430                 set_pending_irq(irq, cpumask_of_cpu(new_cpu));
431         }
432 }
433
434 static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold)
435 {
436         int i, j;
437
438         for_each_online_cpu(i) {
439                 for (j = 0; j < NR_IRQS; j++) {
440                         if (!irq_desc[j].action)
441                                 continue;
442                         /* Is it a significant load ?  */
443                         if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) <
444                                                 useful_load_threshold)
445                                 continue;
446                         balance_irq(i, j);
447                 }
448         }
449         balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
450                 balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);       
451         return;
452 }
453
454 static void do_irq_balance(void)
455 {
456         int i, j;
457         unsigned long max_cpu_irq = 0, min_cpu_irq = (~0);
458         unsigned long move_this_load = 0;
459         int max_loaded = 0, min_loaded = 0;
460         int load;
461         unsigned long useful_load_threshold = balanced_irq_interval + 10;
462         int selected_irq;
463         int tmp_loaded, first_attempt = 1;
464         unsigned long tmp_cpu_irq;
465         unsigned long imbalance = 0;
466         cpumask_t allowed_mask, target_cpu_mask, tmp;
467
468         for_each_possible_cpu(i) {
469                 int package_index;
470                 CPU_IRQ(i) = 0;
471                 if (!cpu_online(i))
472                         continue;
473                 package_index = CPU_TO_PACKAGEINDEX(i);
474                 for (j = 0; j < NR_IRQS; j++) {
475                         unsigned long value_now, delta;
476                         /* Is this an active IRQ or balancing disabled ? */
477                         if (!irq_desc[j].action || irq_balancing_disabled(j))
478                                 continue;
479                         if ( package_index == i )
480                                 IRQ_DELTA(package_index,j) = 0;
481                         /* Determine the total count per processor per IRQ */
482                         value_now = (unsigned long) kstat_cpu(i).irqs[j];
483
484                         /* Determine the activity per processor per IRQ */
485                         delta = value_now - LAST_CPU_IRQ(i,j);
486
487                         /* Update last_cpu_irq[][] for the next time */
488                         LAST_CPU_IRQ(i,j) = value_now;
489
490                         /* Ignore IRQs whose rate is less than the clock */
491                         if (delta < useful_load_threshold)
492                                 continue;
493                         /* update the load for the processor or package total */
494                         IRQ_DELTA(package_index,j) += delta;
495
496                         /* Keep track of the higher numbered sibling as well */
497                         if (i != package_index)
498                                 CPU_IRQ(i) += delta;
499                         /*
500                          * We have sibling A and sibling B in the package
501                          *
502                          * cpu_irq[A] = load for cpu A + load for cpu B
503                          * cpu_irq[B] = load for cpu B
504                          */
505                         CPU_IRQ(package_index) += delta;
506                 }
507         }
508         /* Find the least loaded processor package */
509         for_each_online_cpu(i) {
510                 if (i != CPU_TO_PACKAGEINDEX(i))
511                         continue;
512                 if (min_cpu_irq > CPU_IRQ(i)) {
513                         min_cpu_irq = CPU_IRQ(i);
514                         min_loaded = i;
515                 }
516         }
517         max_cpu_irq = ULONG_MAX;
518
519 tryanothercpu:
520         /* Look for heaviest loaded processor.
521          * We may come back to get the next heaviest loaded processor.
522          * Skip processors with trivial loads.
523          */
524         tmp_cpu_irq = 0;
525         tmp_loaded = -1;
526         for_each_online_cpu(i) {
527                 if (i != CPU_TO_PACKAGEINDEX(i))
528                         continue;
529                 if (max_cpu_irq <= CPU_IRQ(i)) 
530                         continue;
531                 if (tmp_cpu_irq < CPU_IRQ(i)) {
532                         tmp_cpu_irq = CPU_IRQ(i);
533                         tmp_loaded = i;
534                 }
535         }
536
537         if (tmp_loaded == -1) {
538          /* In the case of small number of heavy interrupt sources, 
539           * loading some of the cpus too much. We use Ingo's original 
540           * approach to rotate them around.
541           */
542                 if (!first_attempt && imbalance >= useful_load_threshold) {
543                         rotate_irqs_among_cpus(useful_load_threshold);
544                         return;
545                 }
546                 goto not_worth_the_effort;
547         }
548         
549         first_attempt = 0;              /* heaviest search */
550         max_cpu_irq = tmp_cpu_irq;      /* load */
551         max_loaded = tmp_loaded;        /* processor */
552         imbalance = (max_cpu_irq - min_cpu_irq) / 2;
553         
554         /* if imbalance is less than approx 10% of max load, then
555          * observe diminishing returns action. - quit
556          */
557         if (imbalance < (max_cpu_irq >> 3))
558                 goto not_worth_the_effort;
559
560 tryanotherirq:
561         /* if we select an IRQ to move that can't go where we want, then
562          * see if there is another one to try.
563          */
564         move_this_load = 0;
565         selected_irq = -1;
566         for (j = 0; j < NR_IRQS; j++) {
567                 /* Is this an active IRQ? */
568                 if (!irq_desc[j].action)
569                         continue;
570                 if (imbalance <= IRQ_DELTA(max_loaded,j))
571                         continue;
572                 /* Try to find the IRQ that is closest to the imbalance
573                  * without going over.
574                  */
575                 if (move_this_load < IRQ_DELTA(max_loaded,j)) {
576                         move_this_load = IRQ_DELTA(max_loaded,j);
577                         selected_irq = j;
578                 }
579         }
580         if (selected_irq == -1) {
581                 goto tryanothercpu;
582         }
583
584         imbalance = move_this_load;
585         
586         /* For physical_balance case, we accumulated both load
587          * values in the one of the siblings cpu_irq[],
588          * to use the same code for physical and logical processors
589          * as much as possible. 
590          *
591          * NOTE: the cpu_irq[] array holds the sum of the load for
592          * sibling A and sibling B in the slot for the lowest numbered
593          * sibling (A), _AND_ the load for sibling B in the slot for
594          * the higher numbered sibling.
595          *
596          * We seek the least loaded sibling by making the comparison
597          * (A+B)/2 vs B
598          */
599         load = CPU_IRQ(min_loaded) >> 1;
600         for_each_cpu_mask(j, per_cpu(cpu_sibling_map, min_loaded)) {
601                 if (load > CPU_IRQ(j)) {
602                         /* This won't change cpu_sibling_map[min_loaded] */
603                         load = CPU_IRQ(j);
604                         min_loaded = j;
605                 }
606         }
607
608         cpus_and(allowed_mask,
609                 cpu_online_map,
610                 balance_irq_affinity[selected_irq]);
611         target_cpu_mask = cpumask_of_cpu(min_loaded);
612         cpus_and(tmp, target_cpu_mask, allowed_mask);
613
614         if (!cpus_empty(tmp)) {
615                 /* mark for change destination */
616                 set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded));
617
618                 /* Since we made a change, come back sooner to 
619                  * check for more variation.
620                  */
621                 balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
622                         balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);       
623                 return;
624         }
625         goto tryanotherirq;
626
627 not_worth_the_effort:
628         /*
629          * if we did not find an IRQ to move, then adjust the time interval
630          * upward
631          */
632         balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL,
633                 balanced_irq_interval + BALANCED_IRQ_MORE_DELTA);       
634         return;
635 }
636
637 static int balanced_irq(void *unused)
638 {
639         int i;
640         unsigned long prev_balance_time = jiffies;
641         long time_remaining = balanced_irq_interval;
642
643         /* push everything to CPU 0 to give us a starting point.  */
644         for (i = 0 ; i < NR_IRQS ; i++) {
645                 irq_desc[i].pending_mask = cpumask_of_cpu(0);
646                 set_pending_irq(i, cpumask_of_cpu(0));
647         }
648
649         set_freezable();
650         for ( ; ; ) {
651                 time_remaining = schedule_timeout_interruptible(time_remaining);
652                 try_to_freeze();
653                 if (time_after(jiffies,
654                                 prev_balance_time+balanced_irq_interval)) {
655                         preempt_disable();
656                         do_irq_balance();
657                         prev_balance_time = jiffies;
658                         time_remaining = balanced_irq_interval;
659                         preempt_enable();
660                 }
661         }
662         return 0;
663 }
664
665 static int __init balanced_irq_init(void)
666 {
667         int i;
668         struct cpuinfo_x86 *c;
669         cpumask_t tmp;
670
671         cpus_shift_right(tmp, cpu_online_map, 2);
672         c = &boot_cpu_data;
673         /* When not overwritten by the command line ask subarchitecture. */
674         if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH)
675                 irqbalance_disabled = NO_BALANCE_IRQ;
676         if (irqbalance_disabled)
677                 return 0;
678         
679          /* disable irqbalance completely if there is only one processor online */
680         if (num_online_cpus() < 2) {
681                 irqbalance_disabled = 1;
682                 return 0;
683         }
684         /*
685          * Enable physical balance only if more than 1 physical processor
686          * is present
687          */
688         if (smp_num_siblings > 1 && !cpus_empty(tmp))
689                 physical_balance = 1;
690
691         for_each_online_cpu(i) {
692                 irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
693                 irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
694                 if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) {
695                         printk(KERN_ERR "balanced_irq_init: out of memory");
696                         goto failed;
697                 }
698                 memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS);
699                 memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS);
700         }
701         
702         printk(KERN_INFO "Starting balanced_irq\n");
703         if (!IS_ERR(kthread_run(balanced_irq, NULL, "kirqd")))
704                 return 0;
705         printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq");
706 failed:
707         for_each_possible_cpu(i) {
708                 kfree(irq_cpu_data[i].irq_delta);
709                 irq_cpu_data[i].irq_delta = NULL;
710                 kfree(irq_cpu_data[i].last_irq);
711                 irq_cpu_data[i].last_irq = NULL;
712         }
713         return 0;
714 }
715
716 int __devinit irqbalance_disable(char *str)
717 {
718         irqbalance_disabled = 1;
719         return 1;
720 }
721
722 __setup("noirqbalance", irqbalance_disable);
723
724 late_initcall(balanced_irq_init);
725 #endif /* CONFIG_IRQBALANCE */
726 #endif /* CONFIG_SMP */
727
728 #ifndef CONFIG_SMP
729 void send_IPI_self(int vector)
730 {
731         unsigned int cfg;
732
733         /*
734          * Wait for idle.
735          */
736         apic_wait_icr_idle();
737         cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL;
738         /*
739          * Send the IPI. The write to APIC_ICR fires this off.
740          */
741         apic_write_around(APIC_ICR, cfg);
742 }
743 #endif /* !CONFIG_SMP */
744
745
746 /*
747  * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
748  * specific CPU-side IRQs.
749  */
750
751 #define MAX_PIRQS 8
752 static int pirq_entries [MAX_PIRQS];
753 static int pirqs_enabled;
754 int skip_ioapic_setup;
755
756 static int __init ioapic_pirq_setup(char *str)
757 {
758         int i, max;
759         int ints[MAX_PIRQS+1];
760
761         get_options(str, ARRAY_SIZE(ints), ints);
762
763         for (i = 0; i < MAX_PIRQS; i++)
764                 pirq_entries[i] = -1;
765
766         pirqs_enabled = 1;
767         apic_printk(APIC_VERBOSE, KERN_INFO
768                         "PIRQ redirection, working around broken MP-BIOS.\n");
769         max = MAX_PIRQS;
770         if (ints[0] < MAX_PIRQS)
771                 max = ints[0];
772
773         for (i = 0; i < max; i++) {
774                 apic_printk(APIC_VERBOSE, KERN_DEBUG
775                                 "... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
776                 /*
777                  * PIRQs are mapped upside down, usually.
778                  */
779                 pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
780         }
781         return 1;
782 }
783
784 __setup("pirq=", ioapic_pirq_setup);
785
786 /*
787  * Find the IRQ entry number of a certain pin.
788  */
789 static int find_irq_entry(int apic, int pin, int type)
790 {
791         int i;
792
793         for (i = 0; i < mp_irq_entries; i++)
794                 if (mp_irqs[i].mpc_irqtype == type &&
795                     (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
796                      mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
797                     mp_irqs[i].mpc_dstirq == pin)
798                         return i;
799
800         return -1;
801 }
802
803 /*
804  * Find the pin to which IRQ[irq] (ISA) is connected
805  */
806 static int __init find_isa_irq_pin(int irq, int type)
807 {
808         int i;
809
810         for (i = 0; i < mp_irq_entries; i++) {
811                 int lbus = mp_irqs[i].mpc_srcbus;
812
813                 if (test_bit(lbus, mp_bus_not_pci) &&
814                     (mp_irqs[i].mpc_irqtype == type) &&
815                     (mp_irqs[i].mpc_srcbusirq == irq))
816
817                         return mp_irqs[i].mpc_dstirq;
818         }
819         return -1;
820 }
821
822 static int __init find_isa_irq_apic(int irq, int type)
823 {
824         int i;
825
826         for (i = 0; i < mp_irq_entries; i++) {
827                 int lbus = mp_irqs[i].mpc_srcbus;
828
829                 if (test_bit(lbus, mp_bus_not_pci) &&
830                     (mp_irqs[i].mpc_irqtype == type) &&
831                     (mp_irqs[i].mpc_srcbusirq == irq))
832                         break;
833         }
834         if (i < mp_irq_entries) {
835                 int apic;
836                 for(apic = 0; apic < nr_ioapics; apic++) {
837                         if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
838                                 return apic;
839                 }
840         }
841
842         return -1;
843 }
844
845 /*
846  * Find a specific PCI IRQ entry.
847  * Not an __init, possibly needed by modules
848  */
849 static int pin_2_irq(int idx, int apic, int pin);
850
851 int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
852 {
853         int apic, i, best_guess = -1;
854
855         apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, "
856                 "slot:%d, pin:%d.\n", bus, slot, pin);
857         if (mp_bus_id_to_pci_bus[bus] == -1) {
858                 printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
859                 return -1;
860         }
861         for (i = 0; i < mp_irq_entries; i++) {
862                 int lbus = mp_irqs[i].mpc_srcbus;
863
864                 for (apic = 0; apic < nr_ioapics; apic++)
865                         if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
866                             mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
867                                 break;
868
869                 if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) &&
870                     !mp_irqs[i].mpc_irqtype &&
871                     (bus == lbus) &&
872                     (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
873                         int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
874
875                         if (!(apic || IO_APIC_IRQ(irq)))
876                                 continue;
877
878                         if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
879                                 return irq;
880                         /*
881                          * Use the first all-but-pin matching entry as a
882                          * best-guess fuzzy result for broken mptables.
883                          */
884                         if (best_guess < 0)
885                                 best_guess = irq;
886                 }
887         }
888         return best_guess;
889 }
890 EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
891
892 /*
893  * This function currently is only a helper for the i386 smp boot process where 
894  * we need to reprogram the ioredtbls to cater for the cpus which have come online
895  * so mask in all cases should simply be TARGET_CPUS
896  */
897 #ifdef CONFIG_SMP
898 void __init setup_ioapic_dest(void)
899 {
900         int pin, ioapic, irq, irq_entry;
901
902         if (skip_ioapic_setup == 1)
903                 return;
904
905         for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
906                 for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
907                         irq_entry = find_irq_entry(ioapic, pin, mp_INT);
908                         if (irq_entry == -1)
909                                 continue;
910                         irq = pin_2_irq(irq_entry, ioapic, pin);
911                         set_ioapic_affinity_irq(irq, TARGET_CPUS);
912                 }
913
914         }
915 }
916 #endif
917
918 /*
919  * EISA Edge/Level control register, ELCR
920  */
921 static int EISA_ELCR(unsigned int irq)
922 {
923         if (irq < 16) {
924                 unsigned int port = 0x4d0 + (irq >> 3);
925                 return (inb(port) >> (irq & 7)) & 1;
926         }
927         apic_printk(APIC_VERBOSE, KERN_INFO
928                         "Broken MPtable reports ISA irq %d\n", irq);
929         return 0;
930 }
931
932 /* EISA interrupts are always polarity zero and can be edge or level
933  * trigger depending on the ELCR value.  If an interrupt is listed as
934  * EISA conforming in the MP table, that means its trigger type must
935  * be read in from the ELCR */
936
937 #define default_EISA_trigger(idx)       (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq))
938 #define default_EISA_polarity(idx)      (0)
939
940 /* ISA interrupts are always polarity zero edge triggered,
941  * when listed as conforming in the MP table. */
942
943 #define default_ISA_trigger(idx)        (0)
944 #define default_ISA_polarity(idx)       (0)
945
946 /* PCI interrupts are always polarity one level triggered,
947  * when listed as conforming in the MP table. */
948
949 #define default_PCI_trigger(idx)        (1)
950 #define default_PCI_polarity(idx)       (1)
951
952 /* MCA interrupts are always polarity zero level triggered,
953  * when listed as conforming in the MP table. */
954
955 #define default_MCA_trigger(idx)        (1)
956 #define default_MCA_polarity(idx)       (0)
957
958 static int MPBIOS_polarity(int idx)
959 {
960         int bus = mp_irqs[idx].mpc_srcbus;
961         int polarity;
962
963         /*
964          * Determine IRQ line polarity (high active or low active):
965          */
966         switch (mp_irqs[idx].mpc_irqflag & 3)
967         {
968                 case 0: /* conforms, ie. bus-type dependent polarity */
969                 {
970                         switch (mp_bus_id_to_type[bus])
971                         {
972                                 case MP_BUS_ISA: /* ISA pin */
973                                 {
974                                         polarity = default_ISA_polarity(idx);
975                                         break;
976                                 }
977                                 case MP_BUS_EISA: /* EISA pin */
978                                 {
979                                         polarity = default_EISA_polarity(idx);
980                                         break;
981                                 }
982                                 case MP_BUS_PCI: /* PCI pin */
983                                 {
984                                         polarity = default_PCI_polarity(idx);
985                                         break;
986                                 }
987                                 case MP_BUS_MCA: /* MCA pin */
988                                 {
989                                         polarity = default_MCA_polarity(idx);
990                                         break;
991                                 }
992                                 default:
993                                 {
994                                         printk(KERN_WARNING "broken BIOS!!\n");
995                                         polarity = 1;
996                                         break;
997                                 }
998                         }
999                         break;
1000                 }
1001                 case 1: /* high active */
1002                 {
1003                         polarity = 0;
1004                         break;
1005                 }
1006                 case 2: /* reserved */
1007                 {
1008                         printk(KERN_WARNING "broken BIOS!!\n");
1009                         polarity = 1;
1010                         break;
1011                 }
1012                 case 3: /* low active */
1013                 {
1014                         polarity = 1;
1015                         break;
1016                 }
1017                 default: /* invalid */
1018                 {
1019                         printk(KERN_WARNING "broken BIOS!!\n");
1020                         polarity = 1;
1021                         break;
1022                 }
1023         }
1024         return polarity;
1025 }
1026
1027 static int MPBIOS_trigger(int idx)
1028 {
1029         int bus = mp_irqs[idx].mpc_srcbus;
1030         int trigger;
1031
1032         /*
1033          * Determine IRQ trigger mode (edge or level sensitive):
1034          */
1035         switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
1036         {
1037                 case 0: /* conforms, ie. bus-type dependent */
1038                 {
1039                         switch (mp_bus_id_to_type[bus])
1040                         {
1041                                 case MP_BUS_ISA: /* ISA pin */
1042                                 {
1043                                         trigger = default_ISA_trigger(idx);
1044                                         break;
1045                                 }
1046                                 case MP_BUS_EISA: /* EISA pin */
1047                                 {
1048                                         trigger = default_EISA_trigger(idx);
1049                                         break;
1050                                 }
1051                                 case MP_BUS_PCI: /* PCI pin */
1052                                 {
1053                                         trigger = default_PCI_trigger(idx);
1054                                         break;
1055                                 }
1056                                 case MP_BUS_MCA: /* MCA pin */
1057                                 {
1058                                         trigger = default_MCA_trigger(idx);
1059                                         break;
1060                                 }
1061                                 default:
1062                                 {
1063                                         printk(KERN_WARNING "broken BIOS!!\n");
1064                                         trigger = 1;
1065                                         break;
1066                                 }
1067                         }
1068                         break;
1069                 }
1070                 case 1: /* edge */
1071                 {
1072                         trigger = 0;
1073                         break;
1074                 }
1075                 case 2: /* reserved */
1076                 {
1077                         printk(KERN_WARNING "broken BIOS!!\n");
1078                         trigger = 1;
1079                         break;
1080                 }
1081                 case 3: /* level */
1082                 {
1083                         trigger = 1;
1084                         break;
1085                 }
1086                 default: /* invalid */
1087                 {
1088                         printk(KERN_WARNING "broken BIOS!!\n");
1089                         trigger = 0;
1090                         break;
1091                 }
1092         }
1093         return trigger;
1094 }
1095
1096 static inline int irq_polarity(int idx)
1097 {
1098         return MPBIOS_polarity(idx);
1099 }
1100
1101 static inline int irq_trigger(int idx)
1102 {
1103         return MPBIOS_trigger(idx);
1104 }
1105
1106 static int pin_2_irq(int idx, int apic, int pin)
1107 {
1108         int irq, i;
1109         int bus = mp_irqs[idx].mpc_srcbus;
1110
1111         /*
1112          * Debugging check, we are in big trouble if this message pops up!
1113          */
1114         if (mp_irqs[idx].mpc_dstirq != pin)
1115                 printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
1116
1117         switch (mp_bus_id_to_type[bus])
1118         {
1119                 case MP_BUS_ISA: /* ISA pin */
1120                 case MP_BUS_EISA:
1121                 case MP_BUS_MCA:
1122                 {
1123                         irq = mp_irqs[idx].mpc_srcbusirq;
1124                         break;
1125                 }
1126                 case MP_BUS_PCI: /* PCI pin */
1127                 {
1128                         /*
1129                          * PCI IRQs are mapped in order
1130                          */
1131                         i = irq = 0;
1132                         while (i < apic)
1133                                 irq += nr_ioapic_registers[i++];
1134                         irq += pin;
1135
1136                         /*
1137                          * For MPS mode, so far only needed by ES7000 platform
1138                          */
1139                         if (ioapic_renumber_irq)
1140                                 irq = ioapic_renumber_irq(apic, irq);
1141
1142                         break;
1143                 }
1144                 default:
1145                 {
1146                         printk(KERN_ERR "unknown bus type %d.\n",bus); 
1147                         irq = 0;
1148                         break;
1149                 }
1150         }
1151
1152         /*
1153          * PCI IRQ command line redirection. Yes, limits are hardcoded.
1154          */
1155         if ((pin >= 16) && (pin <= 23)) {
1156                 if (pirq_entries[pin-16] != -1) {
1157                         if (!pirq_entries[pin-16]) {
1158                                 apic_printk(APIC_VERBOSE, KERN_DEBUG
1159                                                 "disabling PIRQ%d\n", pin-16);
1160                         } else {
1161                                 irq = pirq_entries[pin-16];
1162                                 apic_printk(APIC_VERBOSE, KERN_DEBUG
1163                                                 "using PIRQ%d -> IRQ %d\n",
1164                                                 pin-16, irq);
1165                         }
1166                 }
1167         }
1168         return irq;
1169 }
1170
1171 static inline int IO_APIC_irq_trigger(int irq)
1172 {
1173         int apic, idx, pin;
1174
1175         for (apic = 0; apic < nr_ioapics; apic++) {
1176                 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1177                         idx = find_irq_entry(apic,pin,mp_INT);
1178                         if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin)))
1179                                 return irq_trigger(idx);
1180                 }
1181         }
1182         /*
1183          * nonexistent IRQs are edge default
1184          */
1185         return 0;
1186 }
1187
1188 /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
1189 static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 };
1190
1191 static int __assign_irq_vector(int irq)
1192 {
1193         static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
1194         int vector, offset;
1195
1196         BUG_ON((unsigned)irq >= NR_IRQ_VECTORS);
1197
1198         if (irq_vector[irq] > 0)
1199                 return irq_vector[irq];
1200
1201         vector = current_vector;
1202         offset = current_offset;
1203 next:
1204         vector += 8;
1205         if (vector >= FIRST_SYSTEM_VECTOR) {
1206                 offset = (offset + 1) % 8;
1207                 vector = FIRST_DEVICE_VECTOR + offset;
1208         }
1209         if (vector == current_vector)
1210                 return -ENOSPC;
1211         if (test_and_set_bit(vector, used_vectors))
1212                 goto next;
1213
1214         current_vector = vector;
1215         current_offset = offset;
1216         irq_vector[irq] = vector;
1217
1218         return vector;
1219 }
1220
1221 static int assign_irq_vector(int irq)
1222 {
1223         unsigned long flags;
1224         int vector;
1225
1226         spin_lock_irqsave(&vector_lock, flags);
1227         vector = __assign_irq_vector(irq);
1228         spin_unlock_irqrestore(&vector_lock, flags);
1229
1230         return vector;
1231 }
1232 static struct irq_chip ioapic_chip;
1233
1234 #define IOAPIC_AUTO     -1
1235 #define IOAPIC_EDGE     0
1236 #define IOAPIC_LEVEL    1
1237
1238 static void ioapic_register_intr(int irq, int vector, unsigned long trigger)
1239 {
1240         if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
1241             trigger == IOAPIC_LEVEL) {
1242                 irq_desc[irq].status |= IRQ_LEVEL;
1243                 set_irq_chip_and_handler_name(irq, &ioapic_chip,
1244                                          handle_fasteoi_irq, "fasteoi");
1245         } else {
1246                 irq_desc[irq].status &= ~IRQ_LEVEL;
1247                 set_irq_chip_and_handler_name(irq, &ioapic_chip,
1248                                          handle_edge_irq, "edge");
1249         }
1250         set_intr_gate(vector, interrupt[irq]);
1251 }
1252
1253 static void __init setup_IO_APIC_irqs(void)
1254 {
1255         struct IO_APIC_route_entry entry;
1256         int apic, pin, idx, irq, first_notcon = 1, vector;
1257         unsigned long flags;
1258
1259         apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
1260
1261         for (apic = 0; apic < nr_ioapics; apic++) {
1262         for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1263
1264                 /*
1265                  * add it to the IO-APIC irq-routing table:
1266                  */
1267                 memset(&entry,0,sizeof(entry));
1268
1269                 entry.delivery_mode = INT_DELIVERY_MODE;
1270                 entry.dest_mode = INT_DEST_MODE;
1271                 entry.mask = 0;                         /* enable IRQ */
1272                 entry.dest.logical.logical_dest = 
1273                                         cpu_mask_to_apicid(TARGET_CPUS);
1274
1275                 idx = find_irq_entry(apic,pin,mp_INT);
1276                 if (idx == -1) {
1277                         if (first_notcon) {
1278                                 apic_printk(APIC_VERBOSE, KERN_DEBUG
1279                                                 " IO-APIC (apicid-pin) %d-%d",
1280                                                 mp_ioapics[apic].mpc_apicid,
1281                                                 pin);
1282                                 first_notcon = 0;
1283                         } else
1284                                 apic_printk(APIC_VERBOSE, ", %d-%d",
1285                                         mp_ioapics[apic].mpc_apicid, pin);
1286                         continue;
1287                 }
1288
1289                 if (!first_notcon) {
1290                         apic_printk(APIC_VERBOSE, " not connected.\n");
1291                         first_notcon = 1;
1292                 }
1293
1294                 entry.trigger = irq_trigger(idx);
1295                 entry.polarity = irq_polarity(idx);
1296
1297                 if (irq_trigger(idx)) {
1298                         entry.trigger = 1;
1299                         entry.mask = 1;
1300                 }
1301
1302                 irq = pin_2_irq(idx, apic, pin);
1303                 /*
1304                  * skip adding the timer int on secondary nodes, which causes
1305                  * a small but painful rift in the time-space continuum
1306                  */
1307                 if (multi_timer_check(apic, irq))
1308                         continue;
1309                 else
1310                         add_pin_to_irq(irq, apic, pin);
1311
1312                 if (!apic && !IO_APIC_IRQ(irq))
1313                         continue;
1314
1315                 if (IO_APIC_IRQ(irq)) {
1316                         vector = assign_irq_vector(irq);
1317                         entry.vector = vector;
1318                         ioapic_register_intr(irq, vector, IOAPIC_AUTO);
1319                 
1320                         if (!apic && (irq < 16))
1321                                 disable_8259A_irq(irq);
1322                 }
1323                 spin_lock_irqsave(&ioapic_lock, flags);
1324                 __ioapic_write_entry(apic, pin, entry);
1325                 spin_unlock_irqrestore(&ioapic_lock, flags);
1326         }
1327         }
1328
1329         if (!first_notcon)
1330                 apic_printk(APIC_VERBOSE, " not connected.\n");
1331 }
1332
1333 /*
1334  * Set up the 8259A-master output pin:
1335  */
1336 static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
1337 {
1338         struct IO_APIC_route_entry entry;
1339
1340         memset(&entry,0,sizeof(entry));
1341
1342         disable_8259A_irq(0);
1343
1344         /* mask LVT0 */
1345         apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
1346
1347         /*
1348          * We use logical delivery to get the timer IRQ
1349          * to the first CPU.
1350          */
1351         entry.dest_mode = INT_DEST_MODE;
1352         entry.mask = 0;                                 /* unmask IRQ now */
1353         entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
1354         entry.delivery_mode = INT_DELIVERY_MODE;
1355         entry.polarity = 0;
1356         entry.trigger = 0;
1357         entry.vector = vector;
1358
1359         /*
1360          * The timer IRQ doesn't have to know that behind the
1361          * scene we have a 8259A-master in AEOI mode ...
1362          */
1363         irq_desc[0].chip = &ioapic_chip;
1364         set_irq_handler(0, handle_edge_irq);
1365
1366         /*
1367          * Add it to the IO-APIC irq-routing table:
1368          */
1369         ioapic_write_entry(apic, pin, entry);
1370
1371         enable_8259A_irq(0);
1372 }
1373
1374 void __init print_IO_APIC(void)
1375 {
1376         int apic, i;
1377         union IO_APIC_reg_00 reg_00;
1378         union IO_APIC_reg_01 reg_01;
1379         union IO_APIC_reg_02 reg_02;
1380         union IO_APIC_reg_03 reg_03;
1381         unsigned long flags;
1382
1383         if (apic_verbosity == APIC_QUIET)
1384                 return;
1385
1386         printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
1387         for (i = 0; i < nr_ioapics; i++)
1388                 printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
1389                        mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
1390
1391         /*
1392          * We are a bit conservative about what we expect.  We have to
1393          * know about every hardware change ASAP.
1394          */
1395         printk(KERN_INFO "testing the IO APIC.......................\n");
1396
1397         for (apic = 0; apic < nr_ioapics; apic++) {
1398
1399         spin_lock_irqsave(&ioapic_lock, flags);
1400         reg_00.raw = io_apic_read(apic, 0);
1401         reg_01.raw = io_apic_read(apic, 1);
1402         if (reg_01.bits.version >= 0x10)
1403                 reg_02.raw = io_apic_read(apic, 2);
1404         if (reg_01.bits.version >= 0x20)
1405                 reg_03.raw = io_apic_read(apic, 3);
1406         spin_unlock_irqrestore(&ioapic_lock, flags);
1407
1408         printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
1409         printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
1410         printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
1411         printk(KERN_DEBUG ".......    : Delivery Type: %X\n", reg_00.bits.delivery_type);
1412         printk(KERN_DEBUG ".......    : LTS          : %X\n", reg_00.bits.LTS);
1413
1414         printk(KERN_DEBUG ".... register #01: %08X\n", reg_01.raw);
1415         printk(KERN_DEBUG ".......     : max redirection entries: %04X\n", reg_01.bits.entries);
1416
1417         printk(KERN_DEBUG ".......     : PRQ implemented: %X\n", reg_01.bits.PRQ);
1418         printk(KERN_DEBUG ".......     : IO APIC version: %04X\n", reg_01.bits.version);
1419
1420         /*
1421          * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
1422          * but the value of reg_02 is read as the previous read register
1423          * value, so ignore it if reg_02 == reg_01.
1424          */
1425         if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) {
1426                 printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
1427                 printk(KERN_DEBUG ".......     : arbitration: %02X\n", reg_02.bits.arbitration);
1428         }
1429
1430         /*
1431          * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
1432          * or reg_03, but the value of reg_0[23] is read as the previous read
1433          * register value, so ignore it if reg_03 == reg_0[12].
1434          */
1435         if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw &&
1436             reg_03.raw != reg_01.raw) {
1437                 printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw);
1438                 printk(KERN_DEBUG ".......     : Boot DT    : %X\n", reg_03.bits.boot_DT);
1439         }
1440
1441         printk(KERN_DEBUG ".... IRQ redirection table:\n");
1442
1443         printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol"
1444                           " Stat Dest Deli Vect:   \n");
1445
1446         for (i = 0; i <= reg_01.bits.entries; i++) {
1447                 struct IO_APIC_route_entry entry;
1448
1449                 entry = ioapic_read_entry(apic, i);
1450
1451                 printk(KERN_DEBUG " %02x %03X %02X  ",
1452                         i,
1453                         entry.dest.logical.logical_dest,
1454                         entry.dest.physical.physical_dest
1455                 );
1456
1457                 printk("%1d    %1d    %1d   %1d   %1d    %1d    %1d    %02X\n",
1458                         entry.mask,
1459                         entry.trigger,
1460                         entry.irr,
1461                         entry.polarity,
1462                         entry.delivery_status,
1463                         entry.dest_mode,
1464                         entry.delivery_mode,
1465                         entry.vector
1466                 );
1467         }
1468         }
1469         printk(KERN_DEBUG "IRQ to pin mappings:\n");
1470         for (i = 0; i < NR_IRQS; i++) {
1471                 struct irq_pin_list *entry = irq_2_pin + i;
1472                 if (entry->pin < 0)
1473                         continue;
1474                 printk(KERN_DEBUG "IRQ%d ", i);
1475                 for (;;) {
1476                         printk("-> %d:%d", entry->apic, entry->pin);
1477                         if (!entry->next)
1478                                 break;
1479                         entry = irq_2_pin + entry->next;
1480                 }
1481                 printk("\n");
1482         }
1483
1484         printk(KERN_INFO ".................................... done.\n");
1485
1486         return;
1487 }
1488
1489 #if 0
1490
1491 static void print_APIC_bitfield (int base)
1492 {
1493         unsigned int v;
1494         int i, j;
1495
1496         if (apic_verbosity == APIC_QUIET)
1497                 return;
1498
1499         printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
1500         for (i = 0; i < 8; i++) {
1501                 v = apic_read(base + i*0x10);
1502                 for (j = 0; j < 32; j++) {
1503                         if (v & (1<<j))
1504                                 printk("1");
1505                         else
1506                                 printk("0");
1507                 }
1508                 printk("\n");
1509         }
1510 }
1511
1512 void /*__init*/ print_local_APIC(void * dummy)
1513 {
1514         unsigned int v, ver, maxlvt;
1515
1516         if (apic_verbosity == APIC_QUIET)
1517                 return;
1518
1519         printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
1520                 smp_processor_id(), hard_smp_processor_id());
1521         v = apic_read(APIC_ID);
1522         printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, GET_APIC_ID(v));
1523         v = apic_read(APIC_LVR);
1524         printk(KERN_INFO "... APIC VERSION: %08x\n", v);
1525         ver = GET_APIC_VERSION(v);
1526         maxlvt = lapic_get_maxlvt();
1527
1528         v = apic_read(APIC_TASKPRI);
1529         printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
1530
1531         if (APIC_INTEGRATED(ver)) {                     /* !82489DX */
1532                 v = apic_read(APIC_ARBPRI);
1533                 printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
1534                         v & APIC_ARBPRI_MASK);
1535                 v = apic_read(APIC_PROCPRI);
1536                 printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
1537         }
1538
1539         v = apic_read(APIC_EOI);
1540         printk(KERN_DEBUG "... APIC EOI: %08x\n", v);
1541         v = apic_read(APIC_RRR);
1542         printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
1543         v = apic_read(APIC_LDR);
1544         printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
1545         v = apic_read(APIC_DFR);
1546         printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
1547         v = apic_read(APIC_SPIV);
1548         printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
1549
1550         printk(KERN_DEBUG "... APIC ISR field:\n");
1551         print_APIC_bitfield(APIC_ISR);
1552         printk(KERN_DEBUG "... APIC TMR field:\n");
1553         print_APIC_bitfield(APIC_TMR);
1554         printk(KERN_DEBUG "... APIC IRR field:\n");
1555         print_APIC_bitfield(APIC_IRR);
1556
1557         if (APIC_INTEGRATED(ver)) {             /* !82489DX */
1558                 if (maxlvt > 3)         /* Due to the Pentium erratum 3AP. */
1559                         apic_write(APIC_ESR, 0);
1560                 v = apic_read(APIC_ESR);
1561                 printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
1562         }
1563
1564         v = apic_read(APIC_ICR);
1565         printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
1566         v = apic_read(APIC_ICR2);
1567         printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
1568
1569         v = apic_read(APIC_LVTT);
1570         printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
1571
1572         if (maxlvt > 3) {                       /* PC is LVT#4. */
1573                 v = apic_read(APIC_LVTPC);
1574                 printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
1575         }
1576         v = apic_read(APIC_LVT0);
1577         printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
1578         v = apic_read(APIC_LVT1);
1579         printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
1580
1581         if (maxlvt > 2) {                       /* ERR is LVT#3. */
1582                 v = apic_read(APIC_LVTERR);
1583                 printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
1584         }
1585
1586         v = apic_read(APIC_TMICT);
1587         printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
1588         v = apic_read(APIC_TMCCT);
1589         printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
1590         v = apic_read(APIC_TDCR);
1591         printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
1592         printk("\n");
1593 }
1594
1595 void print_all_local_APICs (void)
1596 {
1597         on_each_cpu(print_local_APIC, NULL, 1, 1);
1598 }
1599
1600 void /*__init*/ print_PIC(void)
1601 {
1602         unsigned int v;
1603         unsigned long flags;
1604
1605         if (apic_verbosity == APIC_QUIET)
1606                 return;
1607
1608         printk(KERN_DEBUG "\nprinting PIC contents\n");
1609
1610         spin_lock_irqsave(&i8259A_lock, flags);
1611
1612         v = inb(0xa1) << 8 | inb(0x21);
1613         printk(KERN_DEBUG "... PIC  IMR: %04x\n", v);
1614
1615         v = inb(0xa0) << 8 | inb(0x20);
1616         printk(KERN_DEBUG "... PIC  IRR: %04x\n", v);
1617
1618         outb(0x0b,0xa0);
1619         outb(0x0b,0x20);
1620         v = inb(0xa0) << 8 | inb(0x20);
1621         outb(0x0a,0xa0);
1622         outb(0x0a,0x20);
1623
1624         spin_unlock_irqrestore(&i8259A_lock, flags);
1625
1626         printk(KERN_DEBUG "... PIC  ISR: %04x\n", v);
1627
1628         v = inb(0x4d1) << 8 | inb(0x4d0);
1629         printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
1630 }
1631
1632 #endif  /*  0  */
1633
1634 static void __init enable_IO_APIC(void)
1635 {
1636         union IO_APIC_reg_01 reg_01;
1637         int i8259_apic, i8259_pin;
1638         int i, apic;
1639         unsigned long flags;
1640
1641         for (i = 0; i < PIN_MAP_SIZE; i++) {
1642                 irq_2_pin[i].pin = -1;
1643                 irq_2_pin[i].next = 0;
1644         }
1645         if (!pirqs_enabled)
1646                 for (i = 0; i < MAX_PIRQS; i++)
1647                         pirq_entries[i] = -1;
1648
1649         /*
1650          * The number of IO-APIC IRQ registers (== #pins):
1651          */
1652         for (apic = 0; apic < nr_ioapics; apic++) {
1653                 spin_lock_irqsave(&ioapic_lock, flags);
1654                 reg_01.raw = io_apic_read(apic, 1);
1655                 spin_unlock_irqrestore(&ioapic_lock, flags);
1656                 nr_ioapic_registers[apic] = reg_01.bits.entries+1;
1657         }
1658         for(apic = 0; apic < nr_ioapics; apic++) {
1659                 int pin;
1660                 /* See if any of the pins is in ExtINT mode */
1661                 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1662                         struct IO_APIC_route_entry entry;
1663                         entry = ioapic_read_entry(apic, pin);
1664
1665
1666                         /* If the interrupt line is enabled and in ExtInt mode
1667                          * I have found the pin where the i8259 is connected.
1668                          */
1669                         if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
1670                                 ioapic_i8259.apic = apic;
1671                                 ioapic_i8259.pin  = pin;
1672                                 goto found_i8259;
1673                         }
1674                 }
1675         }
1676  found_i8259:
1677         /* Look to see what if the MP table has reported the ExtINT */
1678         /* If we could not find the appropriate pin by looking at the ioapic
1679          * the i8259 probably is not connected the ioapic but give the
1680          * mptable a chance anyway.
1681          */
1682         i8259_pin  = find_isa_irq_pin(0, mp_ExtINT);
1683         i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
1684         /* Trust the MP table if nothing is setup in the hardware */
1685         if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
1686                 printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
1687                 ioapic_i8259.pin  = i8259_pin;
1688                 ioapic_i8259.apic = i8259_apic;
1689         }
1690         /* Complain if the MP table and the hardware disagree */
1691         if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
1692                 (i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
1693         {
1694                 printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
1695         }
1696
1697         /*
1698          * Do not trust the IO-APIC being empty at bootup
1699          */
1700         clear_IO_APIC();
1701 }
1702
1703 /*
1704  * Not an __init, needed by the reboot code
1705  */
1706 void disable_IO_APIC(void)
1707 {
1708         /*
1709          * Clear the IO-APIC before rebooting:
1710          */
1711         clear_IO_APIC();
1712
1713         /*
1714          * If the i8259 is routed through an IOAPIC
1715          * Put that IOAPIC in virtual wire mode
1716          * so legacy interrupts can be delivered.
1717          */
1718         if (ioapic_i8259.pin != -1) {
1719                 struct IO_APIC_route_entry entry;
1720
1721                 memset(&entry, 0, sizeof(entry));
1722                 entry.mask            = 0; /* Enabled */
1723                 entry.trigger         = 0; /* Edge */
1724                 entry.irr             = 0;
1725                 entry.polarity        = 0; /* High */
1726                 entry.delivery_status = 0;
1727                 entry.dest_mode       = 0; /* Physical */
1728                 entry.delivery_mode   = dest_ExtINT; /* ExtInt */
1729                 entry.vector          = 0;
1730                 entry.dest.physical.physical_dest =
1731                                         GET_APIC_ID(apic_read(APIC_ID));
1732
1733                 /*
1734                  * Add it to the IO-APIC irq-routing table:
1735                  */
1736                 ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
1737         }
1738         disconnect_bsp_APIC(ioapic_i8259.pin != -1);
1739 }
1740
1741 /*
1742  * function to set the IO-APIC physical IDs based on the
1743  * values stored in the MPC table.
1744  *
1745  * by Matt Domsch <Matt_Domsch@dell.com>  Tue Dec 21 12:25:05 CST 1999
1746  */
1747
1748 #ifndef CONFIG_X86_NUMAQ
1749 static void __init setup_ioapic_ids_from_mpc(void)
1750 {
1751         union IO_APIC_reg_00 reg_00;
1752         physid_mask_t phys_id_present_map;
1753         int apic;
1754         int i;
1755         unsigned char old_id;
1756         unsigned long flags;
1757
1758         /*
1759          * Don't check I/O APIC IDs for xAPIC systems.  They have
1760          * no meaning without the serial APIC bus.
1761          */
1762         if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
1763                 || APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
1764                 return;
1765         /*
1766          * This is broken; anything with a real cpu count has to
1767          * circumvent this idiocy regardless.
1768          */
1769         phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map);
1770
1771         /*
1772          * Set the IOAPIC ID to the value stored in the MPC table.
1773          */
1774         for (apic = 0; apic < nr_ioapics; apic++) {
1775
1776                 /* Read the register 0 value */
1777                 spin_lock_irqsave(&ioapic_lock, flags);
1778                 reg_00.raw = io_apic_read(apic, 0);
1779                 spin_unlock_irqrestore(&ioapic_lock, flags);
1780                 
1781                 old_id = mp_ioapics[apic].mpc_apicid;
1782
1783                 if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) {
1784                         printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
1785                                 apic, mp_ioapics[apic].mpc_apicid);
1786                         printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
1787                                 reg_00.bits.ID);
1788                         mp_ioapics[apic].mpc_apicid = reg_00.bits.ID;
1789                 }
1790
1791                 /*
1792                  * Sanity check, is the ID really free? Every APIC in a
1793                  * system must have a unique ID or we get lots of nice
1794                  * 'stuck on smp_invalidate_needed IPI wait' messages.
1795                  */
1796                 if (check_apicid_used(phys_id_present_map,
1797                                         mp_ioapics[apic].mpc_apicid)) {
1798                         printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
1799                                 apic, mp_ioapics[apic].mpc_apicid);
1800                         for (i = 0; i < get_physical_broadcast(); i++)
1801                                 if (!physid_isset(i, phys_id_present_map))
1802                                         break;
1803                         if (i >= get_physical_broadcast())
1804                                 panic("Max APIC ID exceeded!\n");
1805                         printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
1806                                 i);
1807                         physid_set(i, phys_id_present_map);
1808                         mp_ioapics[apic].mpc_apicid = i;
1809                 } else {
1810                         physid_mask_t tmp;
1811                         tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid);
1812                         apic_printk(APIC_VERBOSE, "Setting %d in the "
1813                                         "phys_id_present_map\n",
1814                                         mp_ioapics[apic].mpc_apicid);
1815                         physids_or(phys_id_present_map, phys_id_present_map, tmp);
1816                 }
1817
1818
1819                 /*
1820                  * We need to adjust the IRQ routing table
1821                  * if the ID changed.
1822                  */
1823                 if (old_id != mp_ioapics[apic].mpc_apicid)
1824                         for (i = 0; i < mp_irq_entries; i++)
1825                                 if (mp_irqs[i].mpc_dstapic == old_id)
1826                                         mp_irqs[i].mpc_dstapic
1827                                                 = mp_ioapics[apic].mpc_apicid;
1828
1829                 /*
1830                  * Read the right value from the MPC table and
1831                  * write it into the ID register.
1832                  */
1833                 apic_printk(APIC_VERBOSE, KERN_INFO
1834                         "...changing IO-APIC physical APIC ID to %d ...",
1835                         mp_ioapics[apic].mpc_apicid);
1836
1837                 reg_00.bits.ID = mp_ioapics[apic].mpc_apicid;
1838                 spin_lock_irqsave(&ioapic_lock, flags);
1839                 io_apic_write(apic, 0, reg_00.raw);
1840                 spin_unlock_irqrestore(&ioapic_lock, flags);
1841
1842                 /*
1843                  * Sanity check
1844                  */
1845                 spin_lock_irqsave(&ioapic_lock, flags);
1846                 reg_00.raw = io_apic_read(apic, 0);
1847                 spin_unlock_irqrestore(&ioapic_lock, flags);
1848                 if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid)
1849                         printk("could not set ID!\n");
1850                 else
1851                         apic_printk(APIC_VERBOSE, " ok.\n");
1852         }
1853 }
1854 #else
1855 static void __init setup_ioapic_ids_from_mpc(void) { }
1856 #endif
1857
1858 int no_timer_check __initdata;
1859
1860 static int __init notimercheck(char *s)
1861 {
1862         no_timer_check = 1;
1863         return 1;
1864 }
1865 __setup("no_timer_check", notimercheck);
1866
1867 /*
1868  * There is a nasty bug in some older SMP boards, their mptable lies
1869  * about the timer IRQ. We do the following to work around the situation:
1870  *
1871  *      - timer IRQ defaults to IO-APIC IRQ
1872  *      - if this function detects that timer IRQs are defunct, then we fall
1873  *        back to ISA timer IRQs
1874  */
1875 static int __init timer_irq_works(void)
1876 {
1877         unsigned long t1 = jiffies;
1878         unsigned long flags;
1879
1880         if (no_timer_check)
1881                 return 1;
1882
1883         local_save_flags(flags);
1884         local_irq_enable();
1885         /* Let ten ticks pass... */
1886         mdelay((10 * 1000) / HZ);
1887         local_irq_restore(flags);
1888
1889         /*
1890          * Expect a few ticks at least, to be sure some possible
1891          * glue logic does not lock up after one or two first
1892          * ticks in a non-ExtINT mode.  Also the local APIC
1893          * might have cached one ExtINT interrupt.  Finally, at
1894          * least one tick may be lost due to delays.
1895          */
1896         if (time_after(jiffies, t1 + 4))
1897                 return 1;
1898
1899         return 0;
1900 }
1901
1902 /*
1903  * In the SMP+IOAPIC case it might happen that there are an unspecified
1904  * number of pending IRQ events unhandled. These cases are very rare,
1905  * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
1906  * better to do it this way as thus we do not have to be aware of
1907  * 'pending' interrupts in the IRQ path, except at this point.
1908  */
1909 /*
1910  * Edge triggered needs to resend any interrupt
1911  * that was delayed but this is now handled in the device
1912  * independent code.
1913  */
1914
1915 /*
1916  * Startup quirk:
1917  *
1918  * Starting up a edge-triggered IO-APIC interrupt is
1919  * nasty - we need to make sure that we get the edge.
1920  * If it is already asserted for some reason, we need
1921  * return 1 to indicate that is was pending.
1922  *
1923  * This is not complete - we should be able to fake
1924  * an edge even if it isn't on the 8259A...
1925  *
1926  * (We do this for level-triggered IRQs too - it cannot hurt.)
1927  */
1928 static unsigned int startup_ioapic_irq(unsigned int irq)
1929 {
1930         int was_pending = 0;
1931         unsigned long flags;
1932
1933         spin_lock_irqsave(&ioapic_lock, flags);
1934         if (irq < 16) {
1935                 disable_8259A_irq(irq);
1936                 if (i8259A_irq_pending(irq))
1937                         was_pending = 1;
1938         }
1939         __unmask_IO_APIC_irq(irq);
1940         spin_unlock_irqrestore(&ioapic_lock, flags);
1941
1942         return was_pending;
1943 }
1944
1945 static void ack_ioapic_irq(unsigned int irq)
1946 {
1947         move_native_irq(irq);
1948         ack_APIC_irq();
1949 }
1950
1951 static void ack_ioapic_quirk_irq(unsigned int irq)
1952 {
1953         unsigned long v;
1954         int i;
1955
1956         move_native_irq(irq);
1957 /*
1958  * It appears there is an erratum which affects at least version 0x11
1959  * of I/O APIC (that's the 82093AA and cores integrated into various
1960  * chipsets).  Under certain conditions a level-triggered interrupt is
1961  * erroneously delivered as edge-triggered one but the respective IRR
1962  * bit gets set nevertheless.  As a result the I/O unit expects an EOI
1963  * message but it will never arrive and further interrupts are blocked
1964  * from the source.  The exact reason is so far unknown, but the
1965  * phenomenon was observed when two consecutive interrupt requests
1966  * from a given source get delivered to the same CPU and the source is
1967  * temporarily disabled in between.
1968  *
1969  * A workaround is to simulate an EOI message manually.  We achieve it
1970  * by setting the trigger mode to edge and then to level when the edge
1971  * trigger mode gets detected in the TMR of a local APIC for a
1972  * level-triggered interrupt.  We mask the source for the time of the
1973  * operation to prevent an edge-triggered interrupt escaping meanwhile.
1974  * The idea is from Manfred Spraul.  --macro
1975  */
1976         i = irq_vector[irq];
1977
1978         v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
1979
1980         ack_APIC_irq();
1981
1982         if (!(v & (1 << (i & 0x1f)))) {
1983                 atomic_inc(&irq_mis_count);
1984                 spin_lock(&ioapic_lock);
1985                 __mask_and_edge_IO_APIC_irq(irq);
1986                 __unmask_and_level_IO_APIC_irq(irq);
1987                 spin_unlock(&ioapic_lock);
1988         }
1989 }
1990
1991 static int ioapic_retrigger_irq(unsigned int irq)
1992 {
1993         send_IPI_self(irq_vector[irq]);
1994
1995         return 1;
1996 }
1997
1998 static struct irq_chip ioapic_chip __read_mostly = {
1999         .name           = "IO-APIC",
2000         .startup        = startup_ioapic_irq,
2001         .mask           = mask_IO_APIC_irq,
2002         .unmask         = unmask_IO_APIC_irq,
2003         .ack            = ack_ioapic_irq,
2004         .eoi            = ack_ioapic_quirk_irq,
2005 #ifdef CONFIG_SMP
2006         .set_affinity   = set_ioapic_affinity_irq,
2007 #endif
2008         .retrigger      = ioapic_retrigger_irq,
2009 };
2010
2011
2012 static inline void init_IO_APIC_traps(void)
2013 {
2014         int irq;
2015
2016         /*
2017          * NOTE! The local APIC isn't very good at handling
2018          * multiple interrupts at the same interrupt level.
2019          * As the interrupt level is determined by taking the
2020          * vector number and shifting that right by 4, we
2021          * want to spread these out a bit so that they don't
2022          * all fall in the same interrupt level.
2023          *
2024          * Also, we've got to be careful not to trash gate
2025          * 0x80, because int 0x80 is hm, kind of importantish. ;)
2026          */
2027         for (irq = 0; irq < NR_IRQS ; irq++) {
2028                 int tmp = irq;
2029                 if (IO_APIC_IRQ(tmp) && !irq_vector[tmp]) {
2030                         /*
2031                          * Hmm.. We don't have an entry for this,
2032                          * so default to an old-fashioned 8259
2033                          * interrupt if we can..
2034                          */
2035                         if (irq < 16)
2036                                 make_8259A_irq(irq);
2037                         else
2038                                 /* Strange. Oh, well.. */
2039                                 irq_desc[irq].chip = &no_irq_chip;
2040                 }
2041         }
2042 }
2043
2044 /*
2045  * The local APIC irq-chip implementation:
2046  */
2047
2048 static void ack_apic(unsigned int irq)
2049 {
2050         ack_APIC_irq();
2051 }
2052
2053 static void mask_lapic_irq (unsigned int irq)
2054 {
2055         unsigned long v;
2056
2057         v = apic_read(APIC_LVT0);
2058         apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
2059 }
2060
2061 static void unmask_lapic_irq (unsigned int irq)
2062 {
2063         unsigned long v;
2064
2065         v = apic_read(APIC_LVT0);
2066         apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
2067 }
2068
2069 static struct irq_chip lapic_chip __read_mostly = {
2070         .name           = "local-APIC-edge",
2071         .mask           = mask_lapic_irq,
2072         .unmask         = unmask_lapic_irq,
2073         .eoi            = ack_apic,
2074 };
2075
2076 static void __init setup_nmi(void)
2077 {
2078         /*
2079          * Dirty trick to enable the NMI watchdog ...
2080          * We put the 8259A master into AEOI mode and
2081          * unmask on all local APICs LVT0 as NMI.
2082          *
2083          * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
2084          * is from Maciej W. Rozycki - so we do not have to EOI from
2085          * the NMI handler or the timer interrupt.
2086          */ 
2087         apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
2088
2089         enable_NMI_through_LVT0();
2090
2091         apic_printk(APIC_VERBOSE, " done.\n");
2092 }
2093
2094 /*
2095  * This looks a bit hackish but it's about the only one way of sending
2096  * a few INTA cycles to 8259As and any associated glue logic.  ICR does
2097  * not support the ExtINT mode, unfortunately.  We need to send these
2098  * cycles as some i82489DX-based boards have glue logic that keeps the
2099  * 8259A interrupt line asserted until INTA.  --macro
2100  */
2101 static inline void unlock_ExtINT_logic(void)
2102 {
2103         int apic, pin, i;
2104         struct IO_APIC_route_entry entry0, entry1;
2105         unsigned char save_control, save_freq_select;
2106
2107         pin  = find_isa_irq_pin(8, mp_INT);
2108         if (pin == -1) {
2109                 WARN_ON_ONCE(1);
2110                 return;
2111         }
2112         apic = find_isa_irq_apic(8, mp_INT);
2113         if (apic == -1) {
2114                 WARN_ON_ONCE(1);
2115                 return;
2116         }
2117
2118         entry0 = ioapic_read_entry(apic, pin);
2119         clear_IO_APIC_pin(apic, pin);
2120
2121         memset(&entry1, 0, sizeof(entry1));
2122
2123         entry1.dest_mode = 0;                   /* physical delivery */
2124         entry1.mask = 0;                        /* unmask IRQ now */
2125         entry1.dest.physical.physical_dest = hard_smp_processor_id();
2126         entry1.delivery_mode = dest_ExtINT;
2127         entry1.polarity = entry0.polarity;
2128         entry1.trigger = 0;
2129         entry1.vector = 0;
2130
2131         ioapic_write_entry(apic, pin, entry1);
2132
2133         save_control = CMOS_READ(RTC_CONTROL);
2134         save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
2135         CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
2136                    RTC_FREQ_SELECT);
2137         CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
2138
2139         i = 100;
2140         while (i-- > 0) {
2141                 mdelay(10);
2142                 if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
2143                         i -= 10;
2144         }
2145
2146         CMOS_WRITE(save_control, RTC_CONTROL);
2147         CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
2148         clear_IO_APIC_pin(apic, pin);
2149
2150         ioapic_write_entry(apic, pin, entry0);
2151 }
2152
2153 int timer_uses_ioapic_pin_0;
2154
2155 /*
2156  * This code may look a bit paranoid, but it's supposed to cooperate with
2157  * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
2158  * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
2159  * fanatically on his truly buggy board.
2160  */
2161 static inline void __init check_timer(void)
2162 {
2163         int apic1, pin1, apic2, pin2;
2164         int vector;
2165         unsigned long flags;
2166
2167         local_irq_save(flags);
2168
2169         /*
2170          * get/set the timer IRQ vector:
2171          */
2172         disable_8259A_irq(0);
2173         vector = assign_irq_vector(0);
2174         set_intr_gate(vector, interrupt[0]);
2175
2176         /*
2177          * Subtle, code in do_timer_interrupt() expects an AEOI
2178          * mode for the 8259A whenever interrupts are routed
2179          * through I/O APICs.  Also IRQ0 has to be enabled in
2180          * the 8259A which implies the virtual wire has to be
2181          * disabled in the local APIC.
2182          */
2183         apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
2184         init_8259A(1);
2185         timer_ack = 1;
2186         if (timer_over_8254 > 0)
2187                 enable_8259A_irq(0);
2188
2189         pin1  = find_isa_irq_pin(0, mp_INT);
2190         apic1 = find_isa_irq_apic(0, mp_INT);
2191         pin2  = ioapic_i8259.pin;
2192         apic2 = ioapic_i8259.apic;
2193
2194         if (pin1 == 0)
2195                 timer_uses_ioapic_pin_0 = 1;
2196
2197         printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
2198                 vector, apic1, pin1, apic2, pin2);
2199
2200         if (pin1 != -1) {
2201                 /*
2202                  * Ok, does IRQ0 through the IOAPIC work?
2203                  */
2204                 unmask_IO_APIC_irq(0);
2205                 if (timer_irq_works()) {
2206                         if (nmi_watchdog == NMI_IO_APIC) {
2207                                 disable_8259A_irq(0);
2208                                 setup_nmi();
2209                                 enable_8259A_irq(0);
2210                         }
2211                         if (disable_timer_pin_1 > 0)
2212                                 clear_IO_APIC_pin(0, pin1);
2213                         goto out;
2214                 }
2215                 clear_IO_APIC_pin(apic1, pin1);
2216                 printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to "
2217                                 "IO-APIC\n");
2218         }
2219
2220         printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
2221         if (pin2 != -1) {
2222                 printk("\n..... (found pin %d) ...", pin2);
2223                 /*
2224                  * legacy devices should be connected to IO APIC #0
2225                  */
2226                 setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
2227                 if (timer_irq_works()) {
2228                         printk("works.\n");
2229                         if (pin1 != -1)
2230                                 replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
2231                         else
2232                                 add_pin_to_irq(0, apic2, pin2);
2233                         if (nmi_watchdog == NMI_IO_APIC) {
2234                                 setup_nmi();
2235                         }
2236                         goto out;
2237                 }
2238                 /*
2239                  * Cleanup, just in case ...
2240                  */
2241                 clear_IO_APIC_pin(apic2, pin2);
2242         }
2243         printk(" failed.\n");
2244
2245         if (nmi_watchdog == NMI_IO_APIC) {
2246                 printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
2247                 nmi_watchdog = 0;
2248         }
2249
2250         printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
2251
2252         disable_8259A_irq(0);
2253         set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq,
2254                                       "fasteoi");
2255         apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector);   /* Fixed mode */
2256         enable_8259A_irq(0);
2257
2258         if (timer_irq_works()) {
2259                 printk(" works.\n");
2260                 goto out;
2261         }
2262         apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
2263         printk(" failed.\n");
2264
2265         printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
2266
2267         timer_ack = 0;
2268         init_8259A(0);
2269         make_8259A_irq(0);
2270         apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
2271
2272         unlock_ExtINT_logic();
2273
2274         if (timer_irq_works()) {
2275                 printk(" works.\n");
2276                 goto out;
2277         }
2278         printk(" failed :(.\n");
2279         panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
2280                 "report.  Then try booting with the 'noapic' option");
2281 out:
2282         local_irq_restore(flags);
2283 }
2284
2285 /*
2286  *
2287  * IRQ's that are handled by the PIC in the MPS IOAPIC case.
2288  * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
2289  *   Linux doesn't really care, as it's not actually used
2290  *   for any interrupt handling anyway.
2291  */
2292 #define PIC_IRQS        (1 << PIC_CASCADE_IR)
2293
2294 void __init setup_IO_APIC(void)
2295 {
2296         int i;
2297
2298         /* Reserve all the system vectors. */
2299         for (i = FIRST_SYSTEM_VECTOR; i < NR_VECTORS; i++)
2300                 set_bit(i, used_vectors);
2301
2302         enable_IO_APIC();
2303
2304         if (acpi_ioapic)
2305                 io_apic_irqs = ~0;      /* all IRQs go through IOAPIC */
2306         else
2307                 io_apic_irqs = ~PIC_IRQS;
2308
2309         printk("ENABLING IO-APIC IRQs\n");
2310
2311         /*
2312          * Set up IO-APIC IRQ routing.
2313          */
2314         if (!acpi_ioapic)
2315                 setup_ioapic_ids_from_mpc();
2316         sync_Arb_IDs();
2317         setup_IO_APIC_irqs();
2318         init_IO_APIC_traps();
2319         check_timer();
2320         if (!acpi_ioapic)
2321                 print_IO_APIC();
2322 }
2323
2324 static int __init setup_disable_8254_timer(char *s)
2325 {
2326         timer_over_8254 = -1;
2327         return 1;
2328 }
2329 static int __init setup_enable_8254_timer(char *s)
2330 {
2331         timer_over_8254 = 2;
2332         return 1;
2333 }
2334
2335 __setup("disable_8254_timer", setup_disable_8254_timer);
2336 __setup("enable_8254_timer", setup_enable_8254_timer);
2337
2338 /*
2339  *      Called after all the initialization is done. If we didnt find any
2340  *      APIC bugs then we can allow the modify fast path
2341  */
2342  
2343 static int __init io_apic_bug_finalize(void)
2344 {
2345         if(sis_apic_bug == -1)
2346                 sis_apic_bug = 0;
2347         return 0;
2348 }
2349
2350 late_initcall(io_apic_bug_finalize);
2351
2352 struct sysfs_ioapic_data {
2353         struct sys_device dev;
2354         struct IO_APIC_route_entry entry[0];
2355 };
2356 static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
2357
2358 static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
2359 {
2360         struct IO_APIC_route_entry *entry;
2361         struct sysfs_ioapic_data *data;
2362         int i;
2363         
2364         data = container_of(dev, struct sysfs_ioapic_data, dev);
2365         entry = data->entry;
2366         for (i = 0; i < nr_ioapic_registers[dev->id]; i ++)
2367                 entry[i] = ioapic_read_entry(dev->id, i);
2368
2369         return 0;
2370 }
2371
2372 static int ioapic_resume(struct sys_device *dev)
2373 {
2374         struct IO_APIC_route_entry *entry;
2375         struct sysfs_ioapic_data *data;
2376         unsigned long flags;
2377         union IO_APIC_reg_00 reg_00;
2378         int i;
2379         
2380         data = container_of(dev, struct sysfs_ioapic_data, dev);
2381         entry = data->entry;
2382
2383         spin_lock_irqsave(&ioapic_lock, flags);
2384         reg_00.raw = io_apic_read(dev->id, 0);
2385         if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
2386                 reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
2387                 io_apic_write(dev->id, 0, reg_00.raw);
2388         }
2389         spin_unlock_irqrestore(&ioapic_lock, flags);
2390         for (i = 0; i < nr_ioapic_registers[dev->id]; i ++)
2391                 ioapic_write_entry(dev->id, i, entry[i]);
2392
2393         return 0;
2394 }
2395
2396 static struct sysdev_class ioapic_sysdev_class = {
2397         .name = "ioapic",
2398         .suspend = ioapic_suspend,
2399         .resume = ioapic_resume,
2400 };
2401
2402 static int __init ioapic_init_sysfs(void)
2403 {
2404         struct sys_device * dev;
2405         int i, size, error = 0;
2406
2407         error = sysdev_class_register(&ioapic_sysdev_class);
2408         if (error)
2409                 return error;
2410
2411         for (i = 0; i < nr_ioapics; i++ ) {
2412                 size = sizeof(struct sys_device) + nr_ioapic_registers[i] 
2413                         * sizeof(struct IO_APIC_route_entry);
2414                 mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL);
2415                 if (!mp_ioapic_data[i]) {
2416                         printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
2417                         continue;
2418                 }
2419                 memset(mp_ioapic_data[i], 0, size);
2420                 dev = &mp_ioapic_data[i]->dev;
2421                 dev->id = i; 
2422                 dev->cls = &ioapic_sysdev_class;
2423                 error = sysdev_register(dev);
2424                 if (error) {
2425                         kfree(mp_ioapic_data[i]);
2426                         mp_ioapic_data[i] = NULL;
2427                         printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
2428                         continue;
2429                 }
2430         }
2431
2432         return 0;
2433 }
2434
2435 device_initcall(ioapic_init_sysfs);
2436
2437 /*
2438  * Dynamic irq allocate and deallocation
2439  */
2440 int create_irq(void)
2441 {
2442         /* Allocate an unused irq */
2443         int irq, new, vector = 0;
2444         unsigned long flags;
2445
2446         irq = -ENOSPC;
2447         spin_lock_irqsave(&vector_lock, flags);
2448         for (new = (NR_IRQS - 1); new >= 0; new--) {
2449                 if (platform_legacy_irq(new))
2450                         continue;
2451                 if (irq_vector[new] != 0)
2452                         continue;
2453                 vector = __assign_irq_vector(new);
2454                 if (likely(vector > 0))
2455                         irq = new;
2456                 break;
2457         }
2458         spin_unlock_irqrestore(&vector_lock, flags);
2459
2460         if (irq >= 0) {
2461                 set_intr_gate(vector, interrupt[irq]);
2462                 dynamic_irq_init(irq);
2463         }
2464         return irq;
2465 }
2466
2467 void destroy_irq(unsigned int irq)
2468 {
2469         unsigned long flags;
2470
2471         dynamic_irq_cleanup(irq);
2472
2473         spin_lock_irqsave(&vector_lock, flags);
2474         irq_vector[irq] = 0;
2475         spin_unlock_irqrestore(&vector_lock, flags);
2476 }
2477
2478 /*
2479  * MSI message composition
2480  */
2481 #ifdef CONFIG_PCI_MSI
2482 static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
2483 {
2484         int vector;
2485         unsigned dest;
2486
2487         vector = assign_irq_vector(irq);
2488         if (vector >= 0) {
2489                 dest = cpu_mask_to_apicid(TARGET_CPUS);
2490
2491                 msg->address_hi = MSI_ADDR_BASE_HI;
2492                 msg->address_lo =
2493                         MSI_ADDR_BASE_LO |
2494                         ((INT_DEST_MODE == 0) ?
2495                                 MSI_ADDR_DEST_MODE_PHYSICAL:
2496                                 MSI_ADDR_DEST_MODE_LOGICAL) |
2497                         ((INT_DELIVERY_MODE != dest_LowestPrio) ?
2498                                 MSI_ADDR_REDIRECTION_CPU:
2499                                 MSI_ADDR_REDIRECTION_LOWPRI) |
2500                         MSI_ADDR_DEST_ID(dest);
2501
2502                 msg->data =
2503                         MSI_DATA_TRIGGER_EDGE |
2504                         MSI_DATA_LEVEL_ASSERT |
2505                         ((INT_DELIVERY_MODE != dest_LowestPrio) ?
2506                                 MSI_DATA_DELIVERY_FIXED:
2507                                 MSI_DATA_DELIVERY_LOWPRI) |
2508                         MSI_DATA_VECTOR(vector);
2509         }
2510         return vector;
2511 }
2512
2513 #ifdef CONFIG_SMP
2514 static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
2515 {
2516         struct msi_msg msg;
2517         unsigned int dest;
2518         cpumask_t tmp;
2519         int vector;
2520
2521         cpus_and(tmp, mask, cpu_online_map);
2522         if (cpus_empty(tmp))
2523                 tmp = TARGET_CPUS;
2524
2525         vector = assign_irq_vector(irq);
2526         if (vector < 0)
2527                 return;
2528
2529         dest = cpu_mask_to_apicid(mask);
2530
2531         read_msi_msg(irq, &msg);
2532
2533         msg.data &= ~MSI_DATA_VECTOR_MASK;
2534         msg.data |= MSI_DATA_VECTOR(vector);
2535         msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
2536         msg.address_lo |= MSI_ADDR_DEST_ID(dest);
2537
2538         write_msi_msg(irq, &msg);
2539         irq_desc[irq].affinity = mask;
2540 }
2541 #endif /* CONFIG_SMP */
2542
2543 /*
2544  * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
2545  * which implement the MSI or MSI-X Capability Structure.
2546  */
2547 static struct irq_chip msi_chip = {
2548         .name           = "PCI-MSI",
2549         .unmask         = unmask_msi_irq,
2550         .mask           = mask_msi_irq,
2551         .ack            = ack_ioapic_irq,
2552 #ifdef CONFIG_SMP
2553         .set_affinity   = set_msi_irq_affinity,
2554 #endif
2555         .retrigger      = ioapic_retrigger_irq,
2556 };
2557
2558 int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
2559 {
2560         struct msi_msg msg;
2561         int irq, ret;
2562         irq = create_irq();
2563         if (irq < 0)
2564                 return irq;
2565
2566         ret = msi_compose_msg(dev, irq, &msg);
2567         if (ret < 0) {
2568                 destroy_irq(irq);
2569                 return ret;
2570         }
2571
2572         set_irq_msi(irq, desc);
2573         write_msi_msg(irq, &msg);
2574
2575         set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq,
2576                                       "edge");
2577
2578         return 0;
2579 }
2580
2581 void arch_teardown_msi_irq(unsigned int irq)
2582 {
2583         destroy_irq(irq);
2584 }
2585
2586 #endif /* CONFIG_PCI_MSI */
2587
2588 /*
2589  * Hypertransport interrupt support
2590  */
2591 #ifdef CONFIG_HT_IRQ
2592
2593 #ifdef CONFIG_SMP
2594
2595 static void target_ht_irq(unsigned int irq, unsigned int dest)
2596 {
2597         struct ht_irq_msg msg;
2598         fetch_ht_irq_msg(irq, &msg);
2599
2600         msg.address_lo &= ~(HT_IRQ_LOW_DEST_ID_MASK);
2601         msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
2602
2603         msg.address_lo |= HT_IRQ_LOW_DEST_ID(dest);
2604         msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
2605
2606         write_ht_irq_msg(irq, &msg);
2607 }
2608
2609 static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
2610 {
2611         unsigned int dest;
2612         cpumask_t tmp;
2613
2614         cpus_and(tmp, mask, cpu_online_map);
2615         if (cpus_empty(tmp))
2616                 tmp = TARGET_CPUS;
2617
2618         cpus_and(mask, tmp, CPU_MASK_ALL);
2619
2620         dest = cpu_mask_to_apicid(mask);
2621
2622         target_ht_irq(irq, dest);
2623         irq_desc[irq].affinity = mask;
2624 }
2625 #endif
2626
2627 static struct irq_chip ht_irq_chip = {
2628         .name           = "PCI-HT",
2629         .mask           = mask_ht_irq,
2630         .unmask         = unmask_ht_irq,
2631         .ack            = ack_ioapic_irq,
2632 #ifdef CONFIG_SMP
2633         .set_affinity   = set_ht_irq_affinity,
2634 #endif
2635         .retrigger      = ioapic_retrigger_irq,
2636 };
2637
2638 int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
2639 {
2640         int vector;
2641
2642         vector = assign_irq_vector(irq);
2643         if (vector >= 0) {
2644                 struct ht_irq_msg msg;
2645                 unsigned dest;
2646                 cpumask_t tmp;
2647
2648                 cpus_clear(tmp);
2649                 cpu_set(vector >> 8, tmp);
2650                 dest = cpu_mask_to_apicid(tmp);
2651
2652                 msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
2653
2654                 msg.address_lo =
2655                         HT_IRQ_LOW_BASE |
2656                         HT_IRQ_LOW_DEST_ID(dest) |
2657                         HT_IRQ_LOW_VECTOR(vector) |
2658                         ((INT_DEST_MODE == 0) ?
2659                                 HT_IRQ_LOW_DM_PHYSICAL :
2660                                 HT_IRQ_LOW_DM_LOGICAL) |
2661                         HT_IRQ_LOW_RQEOI_EDGE |
2662                         ((INT_DELIVERY_MODE != dest_LowestPrio) ?
2663                                 HT_IRQ_LOW_MT_FIXED :
2664                                 HT_IRQ_LOW_MT_ARBITRATED) |
2665                         HT_IRQ_LOW_IRQ_MASKED;
2666
2667                 write_ht_irq_msg(irq, &msg);
2668
2669                 set_irq_chip_and_handler_name(irq, &ht_irq_chip,
2670                                               handle_edge_irq, "edge");
2671         }
2672         return vector;
2673 }
2674 #endif /* CONFIG_HT_IRQ */
2675
2676 /* --------------------------------------------------------------------------
2677                           ACPI-based IOAPIC Configuration
2678    -------------------------------------------------------------------------- */
2679
2680 #ifdef CONFIG_ACPI
2681
2682 int __init io_apic_get_unique_id (int ioapic, int apic_id)
2683 {
2684         union IO_APIC_reg_00 reg_00;
2685         static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
2686         physid_mask_t tmp;
2687         unsigned long flags;
2688         int i = 0;
2689
2690         /*
2691          * The P4 platform supports up to 256 APIC IDs on two separate APIC 
2692          * buses (one for LAPICs, one for IOAPICs), where predecessors only 
2693          * supports up to 16 on one shared APIC bus.
2694          * 
2695          * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
2696          *      advantage of new APIC bus architecture.
2697          */
2698
2699         if (physids_empty(apic_id_map))
2700                 apic_id_map = ioapic_phys_id_map(phys_cpu_present_map);
2701
2702         spin_lock_irqsave(&ioapic_lock, flags);
2703         reg_00.raw = io_apic_read(ioapic, 0);
2704         spin_unlock_irqrestore(&ioapic_lock, flags);
2705
2706         if (apic_id >= get_physical_broadcast()) {
2707                 printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
2708                         "%d\n", ioapic, apic_id, reg_00.bits.ID);
2709                 apic_id = reg_00.bits.ID;
2710         }
2711
2712         /*
2713          * Every APIC in a system must have a unique ID or we get lots of nice 
2714          * 'stuck on smp_invalidate_needed IPI wait' messages.
2715          */
2716         if (check_apicid_used(apic_id_map, apic_id)) {
2717
2718                 for (i = 0; i < get_physical_broadcast(); i++) {
2719                         if (!check_apicid_used(apic_id_map, i))
2720                                 break;
2721                 }
2722
2723                 if (i == get_physical_broadcast())
2724                         panic("Max apic_id exceeded!\n");
2725
2726                 printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
2727                         "trying %d\n", ioapic, apic_id, i);
2728
2729                 apic_id = i;
2730         } 
2731
2732         tmp = apicid_to_cpu_present(apic_id);
2733         physids_or(apic_id_map, apic_id_map, tmp);
2734
2735         if (reg_00.bits.ID != apic_id) {
2736                 reg_00.bits.ID = apic_id;
2737
2738                 spin_lock_irqsave(&ioapic_lock, flags);
2739                 io_apic_write(ioapic, 0, reg_00.raw);
2740                 reg_00.raw = io_apic_read(ioapic, 0);
2741                 spin_unlock_irqrestore(&ioapic_lock, flags);
2742
2743                 /* Sanity check */
2744                 if (reg_00.bits.ID != apic_id) {
2745                         printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
2746                         return -1;
2747                 }
2748         }
2749
2750         apic_printk(APIC_VERBOSE, KERN_INFO
2751                         "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
2752
2753         return apic_id;
2754 }
2755
2756
2757 int __init io_apic_get_version (int ioapic)
2758 {
2759         union IO_APIC_reg_01    reg_01;
2760         unsigned long flags;
2761
2762         spin_lock_irqsave(&ioapic_lock, flags);
2763         reg_01.raw = io_apic_read(ioapic, 1);
2764         spin_unlock_irqrestore(&ioapic_lock, flags);
2765
2766         return reg_01.bits.version;
2767 }
2768
2769
2770 int __init io_apic_get_redir_entries (int ioapic)
2771 {
2772         union IO_APIC_reg_01    reg_01;
2773         unsigned long flags;
2774
2775         spin_lock_irqsave(&ioapic_lock, flags);
2776         reg_01.raw = io_apic_read(ioapic, 1);
2777         spin_unlock_irqrestore(&ioapic_lock, flags);
2778
2779         return reg_01.bits.entries;
2780 }
2781
2782
2783 int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
2784 {
2785         struct IO_APIC_route_entry entry;
2786         unsigned long flags;
2787
2788         if (!IO_APIC_IRQ(irq)) {
2789                 printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
2790                         ioapic);
2791                 return -EINVAL;
2792         }
2793
2794         /*
2795          * Generate a PCI IRQ routing entry and program the IOAPIC accordingly.
2796          * Note that we mask (disable) IRQs now -- these get enabled when the
2797          * corresponding device driver registers for this IRQ.
2798          */
2799
2800         memset(&entry,0,sizeof(entry));
2801
2802         entry.delivery_mode = INT_DELIVERY_MODE;
2803         entry.dest_mode = INT_DEST_MODE;
2804         entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
2805         entry.trigger = edge_level;
2806         entry.polarity = active_high_low;
2807         entry.mask  = 1;
2808
2809         /*
2810          * IRQs < 16 are already in the irq_2_pin[] map
2811          */
2812         if (irq >= 16)
2813                 add_pin_to_irq(irq, ioapic, pin);
2814
2815         entry.vector = assign_irq_vector(irq);
2816
2817         apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry "
2818                 "(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic,
2819                 mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
2820                 edge_level, active_high_low);
2821
2822         ioapic_register_intr(irq, entry.vector, edge_level);
2823
2824         if (!ioapic && (irq < 16))
2825                 disable_8259A_irq(irq);
2826
2827         spin_lock_irqsave(&ioapic_lock, flags);
2828         __ioapic_write_entry(ioapic, pin, entry);
2829         spin_unlock_irqrestore(&ioapic_lock, flags);
2830
2831         return 0;
2832 }
2833
2834 int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
2835 {
2836         int i;
2837
2838         if (skip_ioapic_setup)
2839                 return -1;
2840
2841         for (i = 0; i < mp_irq_entries; i++)
2842                 if (mp_irqs[i].mpc_irqtype == mp_INT &&
2843                     mp_irqs[i].mpc_srcbusirq == bus_irq)
2844                         break;
2845         if (i >= mp_irq_entries)
2846                 return -1;
2847
2848         *trigger = irq_trigger(i);
2849         *polarity = irq_polarity(i);
2850         return 0;
2851 }
2852
2853 #endif /* CONFIG_ACPI */
2854
2855 static int __init parse_disable_timer_pin_1(char *arg)
2856 {
2857         disable_timer_pin_1 = 1;
2858         return 0;
2859 }
2860 early_param("disable_timer_pin_1", parse_disable_timer_pin_1);
2861
2862 static int __init parse_enable_timer_pin_1(char *arg)
2863 {
2864         disable_timer_pin_1 = -1;
2865         return 0;
2866 }
2867 early_param("enable_timer_pin_1", parse_enable_timer_pin_1);
2868
2869 static int __init parse_noapic(char *arg)
2870 {
2871         /* disable IO-APIC */
2872         disable_ioapic_setup();
2873         return 0;
2874 }
2875 early_param("noapic", parse_noapic);