Merge branches 'release' and 'autoload' into release
[sfrench/cifs-2.6.git] / arch / x86 / kernel / head_64.S
1 /*
2  *  linux/arch/x86_64/kernel/head.S -- start in 32bit and switch to 64bit
3  *
4  *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
5  *  Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
6  *  Copyright (C) 2000 Karsten Keil <kkeil@suse.de>
7  *  Copyright (C) 2001,2002 Andi Kleen <ak@suse.de>
8  *  Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com>
9  */
10
11
12 #include <linux/linkage.h>
13 #include <linux/threads.h>
14 #include <linux/init.h>
15 #include <asm/desc.h>
16 #include <asm/segment.h>
17 #include <asm/pgtable.h>
18 #include <asm/page.h>
19 #include <asm/msr.h>
20 #include <asm/cache.h>
21
22 #ifdef CONFIG_PARAVIRT
23 #include <asm/asm-offsets.h>
24 #include <asm/paravirt.h>
25 #else
26 #define GET_CR2_INTO_RCX movq %cr2, %rcx
27 #endif
28
29 /* we are not able to switch in one step to the final KERNEL ADRESS SPACE
30  * because we need identity-mapped pages.
31  *
32  */
33
34         .text
35         .section .text.head
36         .code64
37         .globl startup_64
38 startup_64:
39
40         /*
41          * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1,
42          * and someone has loaded an identity mapped page table
43          * for us.  These identity mapped page tables map all of the
44          * kernel pages and possibly all of memory.
45          *
46          * %esi holds a physical pointer to real_mode_data.
47          *
48          * We come here either directly from a 64bit bootloader, or from
49          * arch/x86_64/boot/compressed/head.S.
50          *
51          * We only come here initially at boot nothing else comes here.
52          *
53          * Since we may be loaded at an address different from what we were
54          * compiled to run at we first fixup the physical addresses in our page
55          * tables and then reload them.
56          */
57
58         /* Compute the delta between the address I am compiled to run at and the
59          * address I am actually running at.
60          */
61         leaq    _text(%rip), %rbp
62         subq    $_text - __START_KERNEL_map, %rbp
63
64         /* Is the address not 2M aligned? */
65         movq    %rbp, %rax
66         andl    $~PMD_PAGE_MASK, %eax
67         testl   %eax, %eax
68         jnz     bad_address
69
70         /* Is the address too large? */
71         leaq    _text(%rip), %rdx
72         movq    $PGDIR_SIZE, %rax
73         cmpq    %rax, %rdx
74         jae     bad_address
75
76         /* Fixup the physical addresses in the page table
77          */
78         addq    %rbp, init_level4_pgt + 0(%rip)
79         addq    %rbp, init_level4_pgt + (258*8)(%rip)
80         addq    %rbp, init_level4_pgt + (511*8)(%rip)
81
82         addq    %rbp, level3_ident_pgt + 0(%rip)
83
84         addq    %rbp, level3_kernel_pgt + (510*8)(%rip)
85         addq    %rbp, level3_kernel_pgt + (511*8)(%rip)
86
87         addq    %rbp, level2_fixmap_pgt + (506*8)(%rip)
88
89         /* Add an Identity mapping if I am above 1G */
90         leaq    _text(%rip), %rdi
91         andq    $PMD_PAGE_MASK, %rdi
92
93         movq    %rdi, %rax
94         shrq    $PUD_SHIFT, %rax
95         andq    $(PTRS_PER_PUD - 1), %rax
96         jz      ident_complete
97
98         leaq    (level2_spare_pgt - __START_KERNEL_map + _KERNPG_TABLE)(%rbp), %rdx
99         leaq    level3_ident_pgt(%rip), %rbx
100         movq    %rdx, 0(%rbx, %rax, 8)
101
102         movq    %rdi, %rax
103         shrq    $PMD_SHIFT, %rax
104         andq    $(PTRS_PER_PMD - 1), %rax
105         leaq    __PAGE_KERNEL_LARGE_EXEC(%rdi), %rdx
106         leaq    level2_spare_pgt(%rip), %rbx
107         movq    %rdx, 0(%rbx, %rax, 8)
108 ident_complete:
109
110         /* Fixup the kernel text+data virtual addresses
111          */
112         leaq    level2_kernel_pgt(%rip), %rdi
113         leaq    4096(%rdi), %r8
114         /* See if it is a valid page table entry */
115 1:      testq   $1, 0(%rdi)
116         jz      2f
117         addq    %rbp, 0(%rdi)
118         /* Go to the next page */
119 2:      addq    $8, %rdi
120         cmp     %r8, %rdi
121         jne     1b
122
123         /* Fixup phys_base */
124         addq    %rbp, phys_base(%rip)
125
126 #ifdef CONFIG_SMP
127         addq    %rbp, trampoline_level4_pgt + 0(%rip)
128         addq    %rbp, trampoline_level4_pgt + (511*8)(%rip)
129 #endif
130 #ifdef CONFIG_ACPI_SLEEP
131         addq    %rbp, wakeup_level4_pgt + 0(%rip)
132         addq    %rbp, wakeup_level4_pgt + (511*8)(%rip)
133 #endif
134
135         /* Due to ENTRY(), sometimes the empty space gets filled with
136          * zeros. Better take a jmp than relying on empty space being
137          * filled with 0x90 (nop)
138          */
139         jmp secondary_startup_64
140 ENTRY(secondary_startup_64)
141         /*
142          * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1,
143          * and someone has loaded a mapped page table.
144          *
145          * %esi holds a physical pointer to real_mode_data.
146          *
147          * We come here either from startup_64 (using physical addresses)
148          * or from trampoline.S (using virtual addresses).
149          *
150          * Using virtual addresses from trampoline.S removes the need
151          * to have any identity mapped pages in the kernel page table
152          * after the boot processor executes this code.
153          */
154
155         /* Enable PAE mode and PGE */
156         xorq    %rax, %rax
157         btsq    $5, %rax
158         btsq    $7, %rax
159         movq    %rax, %cr4
160
161         /* Setup early boot stage 4 level pagetables. */
162         movq    $(init_level4_pgt - __START_KERNEL_map), %rax
163         addq    phys_base(%rip), %rax
164         movq    %rax, %cr3
165
166         /* Ensure I am executing from virtual addresses */
167         movq    $1f, %rax
168         jmp     *%rax
169 1:
170
171         /* Check if nx is implemented */
172         movl    $0x80000001, %eax
173         cpuid
174         movl    %edx,%edi
175
176         /* Setup EFER (Extended Feature Enable Register) */
177         movl    $MSR_EFER, %ecx
178         rdmsr
179         btsl    $_EFER_SCE, %eax        /* Enable System Call */
180         btl     $20,%edi                /* No Execute supported? */
181         jnc     1f
182         btsl    $_EFER_NX, %eax
183 1:      wrmsr                           /* Make changes effective */
184
185         /* Setup cr0 */
186 #define CR0_PM                          1               /* protected mode */
187 #define CR0_MP                          (1<<1)
188 #define CR0_ET                          (1<<4)
189 #define CR0_NE                          (1<<5)
190 #define CR0_WP                          (1<<16)
191 #define CR0_AM                          (1<<18)
192 #define CR0_PAGING                      (1<<31)
193         movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax
194         /* Make changes effective */
195         movq    %rax, %cr0
196
197         /* Setup a boot time stack */
198         movq init_rsp(%rip),%rsp
199
200         /* zero EFLAGS after setting rsp */
201         pushq $0
202         popfq
203
204         /*
205          * We must switch to a new descriptor in kernel space for the GDT
206          * because soon the kernel won't have access anymore to the userspace
207          * addresses where we're currently running on. We have to do that here
208          * because in 32bit we couldn't load a 64bit linear address.
209          */
210         lgdt    cpu_gdt_descr(%rip)
211
212         /* set up data segments. actually 0 would do too */
213         movl $__KERNEL_DS,%eax
214         movl %eax,%ds
215         movl %eax,%ss
216         movl %eax,%es
217
218         /*
219          * We don't really need to load %fs or %gs, but load them anyway
220          * to kill any stale realmode selectors.  This allows execution
221          * under VT hardware.
222          */
223         movl %eax,%fs
224         movl %eax,%gs
225
226         /* 
227          * Setup up a dummy PDA. this is just for some early bootup code
228          * that does in_interrupt() 
229          */ 
230         movl    $MSR_GS_BASE,%ecx
231         movq    $empty_zero_page,%rax
232         movq    %rax,%rdx
233         shrq    $32,%rdx
234         wrmsr   
235
236         /* esi is pointer to real mode structure with interesting info.
237            pass it to C */
238         movl    %esi, %edi
239         
240         /* Finally jump to run C code and to be on real kernel address
241          * Since we are running on identity-mapped space we have to jump
242          * to the full 64bit address, this is only possible as indirect
243          * jump.  In addition we need to ensure %cs is set so we make this
244          * a far return.
245          */
246         movq    initial_code(%rip),%rax
247         pushq   $0              # fake return address to stop unwinder
248         pushq   $__KERNEL_CS    # set correct cs
249         pushq   %rax            # target address in negative space
250         lretq
251
252         /* SMP bootup changes these two */
253         __CPUINITDATA
254         .align  8
255         ENTRY(initial_code)
256         .quad   x86_64_start_kernel
257         __FINITDATA
258
259         ENTRY(init_rsp)
260         .quad  init_thread_union+THREAD_SIZE-8
261
262 bad_address:
263         jmp bad_address
264
265 #ifdef CONFIG_EARLY_PRINTK
266 .macro early_idt_tramp first, last
267         .ifgt \last-\first
268         early_idt_tramp \first, \last-1
269         .endif
270         movl $\last,%esi
271         jmp early_idt_handler
272 .endm
273
274         .globl early_idt_handlers
275 early_idt_handlers:
276         early_idt_tramp 0, 63
277         early_idt_tramp 64, 127
278         early_idt_tramp 128, 191
279         early_idt_tramp 192, 255
280 #endif
281
282 ENTRY(early_idt_handler)
283 #ifdef CONFIG_EARLY_PRINTK
284         cmpl $2,early_recursion_flag(%rip)
285         jz  1f
286         incl early_recursion_flag(%rip)
287         GET_CR2_INTO_RCX
288         movq %rcx,%r9
289         xorl %r8d,%r8d          # zero for error code
290         movl %esi,%ecx          # get vector number
291         # Test %ecx against mask of vectors that push error code.
292         cmpl $31,%ecx
293         ja 0f
294         movl $1,%eax
295         salq %cl,%rax
296         testl $0x27d00,%eax
297         je 0f
298         popq %r8                # get error code
299 0:      movq 0(%rsp),%rcx       # get ip
300         movq 8(%rsp),%rdx       # get cs
301         xorl %eax,%eax
302         leaq early_idt_msg(%rip),%rdi
303         call early_printk
304         cmpl $2,early_recursion_flag(%rip)
305         jz  1f
306         call dump_stack
307 #ifdef CONFIG_KALLSYMS  
308         leaq early_idt_ripmsg(%rip),%rdi
309         movq 8(%rsp),%rsi       # get rip again
310         call __print_symbol
311 #endif
312 #endif /* EARLY_PRINTK */
313 1:      hlt
314         jmp 1b
315
316 #ifdef CONFIG_EARLY_PRINTK
317 early_recursion_flag:
318         .long 0
319
320 early_idt_msg:
321         .asciz "PANIC: early exception %02lx rip %lx:%lx error %lx cr2 %lx\n"
322 early_idt_ripmsg:
323         .asciz "RIP %s\n"
324 #endif /* CONFIG_EARLY_PRINTK */
325
326 .balign PAGE_SIZE
327
328 #define NEXT_PAGE(name) \
329         .balign PAGE_SIZE; \
330 ENTRY(name)
331
332 /* Automate the creation of 1 to 1 mapping pmd entries */
333 #define PMDS(START, PERM, COUNT)                \
334         i = 0 ;                                 \
335         .rept (COUNT) ;                         \
336         .quad   (START) + (i << 21) + (PERM) ;  \
337         i = i + 1 ;                             \
338         .endr
339
340         /*
341          * This default setting generates an ident mapping at address 0x100000
342          * and a mapping for the kernel that precisely maps virtual address
343          * 0xffffffff80000000 to physical address 0x000000. (always using
344          * 2Mbyte large pages provided by PAE mode)
345          */
346 NEXT_PAGE(init_level4_pgt)
347         .quad   level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
348         .fill   257,8,0
349         .quad   level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
350         .fill   252,8,0
351         /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
352         .quad   level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE
353
354 NEXT_PAGE(level3_ident_pgt)
355         .quad   level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
356         .fill   511,8,0
357
358 NEXT_PAGE(level3_kernel_pgt)
359         .fill   510,8,0
360         /* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
361         .quad   level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
362         .quad   level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE
363
364 NEXT_PAGE(level2_fixmap_pgt)
365         .fill   506,8,0
366         .quad   level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE
367         /* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */
368         .fill   5,8,0
369
370 NEXT_PAGE(level1_fixmap_pgt)
371         .fill   512,8,0
372
373 NEXT_PAGE(level2_ident_pgt)
374         /* Since I easily can, map the first 1G.
375          * Don't set NX because code runs from these pages.
376          */
377         PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD)
378
379 NEXT_PAGE(level2_kernel_pgt)
380         /* 40MB kernel mapping. The kernel code cannot be bigger than that.
381            When you change this change KERNEL_TEXT_SIZE in page.h too. */
382         /* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */
383         PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, KERNEL_TEXT_SIZE/PMD_SIZE)
384         /* Module mapping starts here */
385         .fill   (PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0
386
387 NEXT_PAGE(level2_spare_pgt)
388         .fill   512,8,0
389
390 #undef PMDS
391 #undef NEXT_PAGE
392
393         .data
394         .align 16
395         .globl cpu_gdt_descr
396 cpu_gdt_descr:
397         .word   gdt_end-cpu_gdt_table-1
398 gdt:
399         .quad   cpu_gdt_table
400 #ifdef CONFIG_SMP
401         .rept   NR_CPUS-1
402         .word   0
403         .quad   0
404         .endr
405 #endif
406
407 ENTRY(phys_base)
408         /* This must match the first entry in level2_kernel_pgt */
409         .quad   0x0000000000000000
410
411 /* We need valid kernel segments for data and code in long mode too
412  * IRET will check the segment types  kkeil 2000/10/28
413  * Also sysret mandates a special GDT layout 
414  */
415                                 
416         .section .data.page_aligned, "aw"
417         .align PAGE_SIZE
418
419 /* The TLS descriptors are currently at a different place compared to i386.
420    Hopefully nobody expects them at a fixed place (Wine?) */
421         
422 ENTRY(cpu_gdt_table)
423         .quad   0x0000000000000000      /* NULL descriptor */
424         .quad   0x00cf9b000000ffff      /* __KERNEL32_CS */
425         .quad   0x00af9b000000ffff      /* __KERNEL_CS */
426         .quad   0x00cf93000000ffff      /* __KERNEL_DS */
427         .quad   0x00cffb000000ffff      /* __USER32_CS */
428         .quad   0x00cff3000000ffff      /* __USER_DS, __USER32_DS  */
429         .quad   0x00affb000000ffff      /* __USER_CS */
430         .quad   0x0                     /* unused */
431         .quad   0,0                     /* TSS */
432         .quad   0,0                     /* LDT */
433         .quad   0,0,0                   /* three TLS descriptors */ 
434         .quad   0x0000f40000000000      /* node/CPU stored in limit */
435 gdt_end:        
436         /* asm/segment.h:GDT_ENTRIES must match this */ 
437         /* This should be a multiple of the cache line size */
438         /* GDTs of other CPUs are now dynamically allocated */
439
440         /* zero the remaining page */
441         .fill PAGE_SIZE / 8 - GDT_ENTRIES,8,0
442
443         .section .bss, "aw", @nobits
444         .align L1_CACHE_BYTES
445 ENTRY(idt_table)
446         .skip 256 * 16
447
448         .section .bss.page_aligned, "aw", @nobits
449         .align PAGE_SIZE
450 ENTRY(empty_zero_page)
451         .skip PAGE_SIZE