Merge remote-tracking branches 'asoc/topic/wm9712', 'asoc/topic/wm9713' and 'asoc...
[sfrench/cifs-2.6.git] / arch / x86 / include / asm / thread_info.h
1 /* thread_info.h: low-level thread information
2  *
3  * Copyright (C) 2002  David Howells (dhowells@redhat.com)
4  * - Incorporating suggestions made by Linus Torvalds and Dave Miller
5  */
6
7 #ifndef _ASM_X86_THREAD_INFO_H
8 #define _ASM_X86_THREAD_INFO_H
9
10 #include <linux/compiler.h>
11 #include <asm/page.h>
12 #include <asm/percpu.h>
13 #include <asm/types.h>
14
15 /*
16  * TOP_OF_KERNEL_STACK_PADDING is a number of unused bytes that we
17  * reserve at the top of the kernel stack.  We do it because of a nasty
18  * 32-bit corner case.  On x86_32, the hardware stack frame is
19  * variable-length.  Except for vm86 mode, struct pt_regs assumes a
20  * maximum-length frame.  If we enter from CPL 0, the top 8 bytes of
21  * pt_regs don't actually exist.  Ordinarily this doesn't matter, but it
22  * does in at least one case:
23  *
24  * If we take an NMI early enough in SYSENTER, then we can end up with
25  * pt_regs that extends above sp0.  On the way out, in the espfix code,
26  * we can read the saved SS value, but that value will be above sp0.
27  * Without this offset, that can result in a page fault.  (We are
28  * careful that, in this case, the value we read doesn't matter.)
29  *
30  * In vm86 mode, the hardware frame is much longer still, so add 16
31  * bytes to make room for the real-mode segments.
32  *
33  * x86_64 has a fixed-length stack frame.
34  */
35 #ifdef CONFIG_X86_32
36 # ifdef CONFIG_VM86
37 #  define TOP_OF_KERNEL_STACK_PADDING 16
38 # else
39 #  define TOP_OF_KERNEL_STACK_PADDING 8
40 # endif
41 #else
42 # define TOP_OF_KERNEL_STACK_PADDING 0
43 #endif
44
45 /*
46  * low level task data that entry.S needs immediate access to
47  * - this struct should fit entirely inside of one cache line
48  * - this struct shares the supervisor stack pages
49  */
50 #ifndef __ASSEMBLY__
51 struct task_struct;
52 #include <asm/cpufeature.h>
53 #include <linux/atomic.h>
54
55 struct thread_info {
56         unsigned long           flags;          /* low level flags */
57 };
58
59 #define INIT_THREAD_INFO(tsk)                   \
60 {                                               \
61         .flags          = 0,                    \
62 }
63
64 #define init_stack              (init_thread_union.stack)
65
66 #else /* !__ASSEMBLY__ */
67
68 #include <asm/asm-offsets.h>
69
70 #endif
71
72 /*
73  * thread information flags
74  * - these are process state flags that various assembly files
75  *   may need to access
76  * - pending work-to-be-done flags are in LSW
77  * - other flags in MSW
78  * Warning: layout of LSW is hardcoded in entry.S
79  */
80 #define TIF_SYSCALL_TRACE       0       /* syscall trace active */
81 #define TIF_NOTIFY_RESUME       1       /* callback before returning to user */
82 #define TIF_SIGPENDING          2       /* signal pending */
83 #define TIF_NEED_RESCHED        3       /* rescheduling necessary */
84 #define TIF_SINGLESTEP          4       /* reenable singlestep on user return*/
85 #define TIF_SYSCALL_EMU         6       /* syscall emulation active */
86 #define TIF_SYSCALL_AUDIT       7       /* syscall auditing active */
87 #define TIF_SECCOMP             8       /* secure computing */
88 #define TIF_USER_RETURN_NOTIFY  11      /* notify kernel of userspace return */
89 #define TIF_UPROBE              12      /* breakpointed or singlestepping */
90 #define TIF_NOTSC               16      /* TSC is not accessible in userland */
91 #define TIF_IA32                17      /* IA32 compatibility process */
92 #define TIF_NOHZ                19      /* in adaptive nohz mode */
93 #define TIF_MEMDIE              20      /* is terminating due to OOM killer */
94 #define TIF_POLLING_NRFLAG      21      /* idle is polling for TIF_NEED_RESCHED */
95 #define TIF_IO_BITMAP           22      /* uses I/O bitmap */
96 #define TIF_FORCED_TF           24      /* true if TF in eflags artificially */
97 #define TIF_BLOCKSTEP           25      /* set when we want DEBUGCTLMSR_BTF */
98 #define TIF_LAZY_MMU_UPDATES    27      /* task is updating the mmu lazily */
99 #define TIF_SYSCALL_TRACEPOINT  28      /* syscall tracepoint instrumentation */
100 #define TIF_ADDR32              29      /* 32-bit address space on 64 bits */
101 #define TIF_X32                 30      /* 32-bit native x86-64 binary */
102
103 #define _TIF_SYSCALL_TRACE      (1 << TIF_SYSCALL_TRACE)
104 #define _TIF_NOTIFY_RESUME      (1 << TIF_NOTIFY_RESUME)
105 #define _TIF_SIGPENDING         (1 << TIF_SIGPENDING)
106 #define _TIF_SINGLESTEP         (1 << TIF_SINGLESTEP)
107 #define _TIF_NEED_RESCHED       (1 << TIF_NEED_RESCHED)
108 #define _TIF_SYSCALL_EMU        (1 << TIF_SYSCALL_EMU)
109 #define _TIF_SYSCALL_AUDIT      (1 << TIF_SYSCALL_AUDIT)
110 #define _TIF_SECCOMP            (1 << TIF_SECCOMP)
111 #define _TIF_USER_RETURN_NOTIFY (1 << TIF_USER_RETURN_NOTIFY)
112 #define _TIF_UPROBE             (1 << TIF_UPROBE)
113 #define _TIF_NOTSC              (1 << TIF_NOTSC)
114 #define _TIF_IA32               (1 << TIF_IA32)
115 #define _TIF_NOHZ               (1 << TIF_NOHZ)
116 #define _TIF_POLLING_NRFLAG     (1 << TIF_POLLING_NRFLAG)
117 #define _TIF_IO_BITMAP          (1 << TIF_IO_BITMAP)
118 #define _TIF_FORCED_TF          (1 << TIF_FORCED_TF)
119 #define _TIF_BLOCKSTEP          (1 << TIF_BLOCKSTEP)
120 #define _TIF_LAZY_MMU_UPDATES   (1 << TIF_LAZY_MMU_UPDATES)
121 #define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
122 #define _TIF_ADDR32             (1 << TIF_ADDR32)
123 #define _TIF_X32                (1 << TIF_X32)
124
125 /*
126  * work to do in syscall_trace_enter().  Also includes TIF_NOHZ for
127  * enter_from_user_mode()
128  */
129 #define _TIF_WORK_SYSCALL_ENTRY \
130         (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_AUDIT |   \
131          _TIF_SECCOMP | _TIF_SYSCALL_TRACEPOINT |       \
132          _TIF_NOHZ)
133
134 /* work to do on any return to user space */
135 #define _TIF_ALLWORK_MASK                                               \
136         ((0x0000FFFF & ~_TIF_SECCOMP) | _TIF_SYSCALL_TRACEPOINT |       \
137         _TIF_NOHZ)
138
139 /* flags to check in __switch_to() */
140 #define _TIF_WORK_CTXSW                                                 \
141         (_TIF_IO_BITMAP|_TIF_NOTSC|_TIF_BLOCKSTEP)
142
143 #define _TIF_WORK_CTXSW_PREV (_TIF_WORK_CTXSW|_TIF_USER_RETURN_NOTIFY)
144 #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW)
145
146 #define STACK_WARN              (THREAD_SIZE/8)
147
148 /*
149  * macros/functions for gaining access to the thread information structure
150  *
151  * preempt_count needs to be 1 initially, until the scheduler is functional.
152  */
153 #ifndef __ASSEMBLY__
154
155 static inline unsigned long current_stack_pointer(void)
156 {
157         unsigned long sp;
158 #ifdef CONFIG_X86_64
159         asm("mov %%rsp,%0" : "=g" (sp));
160 #else
161         asm("mov %%esp,%0" : "=g" (sp));
162 #endif
163         return sp;
164 }
165
166 /*
167  * Walks up the stack frames to make sure that the specified object is
168  * entirely contained by a single stack frame.
169  *
170  * Returns:
171  *               1 if within a frame
172  *              -1 if placed across a frame boundary (or outside stack)
173  *               0 unable to determine (no frame pointers, etc)
174  */
175 static inline int arch_within_stack_frames(const void * const stack,
176                                            const void * const stackend,
177                                            const void *obj, unsigned long len)
178 {
179 #if defined(CONFIG_FRAME_POINTER)
180         const void *frame = NULL;
181         const void *oldframe;
182
183         oldframe = __builtin_frame_address(1);
184         if (oldframe)
185                 frame = __builtin_frame_address(2);
186         /*
187          * low ----------------------------------------------> high
188          * [saved bp][saved ip][args][local vars][saved bp][saved ip]
189          *                     ^----------------^
190          *               allow copies only within here
191          */
192         while (stack <= frame && frame < stackend) {
193                 /*
194                  * If obj + len extends past the last frame, this
195                  * check won't pass and the next frame will be 0,
196                  * causing us to bail out and correctly report
197                  * the copy as invalid.
198                  */
199                 if (obj + len <= frame)
200                         return obj >= oldframe + 2 * sizeof(void *) ? 1 : -1;
201                 oldframe = frame;
202                 frame = *(const void * const *)frame;
203         }
204         return -1;
205 #else
206         return 0;
207 #endif
208 }
209
210 #else /* !__ASSEMBLY__ */
211
212 #ifdef CONFIG_X86_64
213 # define cpu_current_top_of_stack (cpu_tss + TSS_sp0)
214 #endif
215
216 #endif
217
218 #ifdef CONFIG_COMPAT
219 #define TS_I386_REGS_POKED      0x0004  /* regs poked by 32-bit ptracer */
220 #endif
221 #ifndef __ASSEMBLY__
222
223 #ifdef CONFIG_X86_32
224 #define in_ia32_syscall() true
225 #else
226 #define in_ia32_syscall() (IS_ENABLED(CONFIG_IA32_EMULATION) && \
227                            current->thread.status & TS_COMPAT)
228 #endif
229
230 /*
231  * Force syscall return via IRET by making it look as if there was
232  * some work pending. IRET is our most capable (but slowest) syscall
233  * return path, which is able to restore modified SS, CS and certain
234  * EFLAGS values that other (fast) syscall return instructions
235  * are not able to restore properly.
236  */
237 #define force_iret() set_thread_flag(TIF_NOTIFY_RESUME)
238
239 extern void arch_task_cache_init(void);
240 extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
241 extern void arch_release_task_struct(struct task_struct *tsk);
242 #endif  /* !__ASSEMBLY__ */
243
244 #endif /* _ASM_X86_THREAD_INFO_H */