arch/s390/kernel/relocate_kernel64.S

   1 /*
   2  * arch/s390/kernel/relocate_kernel64.S
   3  *
   4  * (C) Copyright IBM Corp. 2005
   5  *
   6  * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com>
   7  *            Heiko Carstens <heiko.carstens@de.ibm.com>
   8  *
   9  */
  10
  11 /*
  12  * moves the new kernel to its destination...
  13  * %r2 = pointer to first kimage_entry_t
  14  * %r3 = start address - where to jump to after the job is done...
  15  *
  16  * %r5 will be used as temp. storage
  17  * %r6 holds the destination address
  18  * %r7 = PAGE_SIZE
  19  * %r8 holds the source address
  20  * %r9 = PAGE_SIZE
  21  *
  22  * 0xf000 is a page_mask
  23  */
  24
  25         .text
  26         .globl          relocate_kernel
  27         relocate_kernel:
  28                 basr    %r13,0          #base address
  29         .base:
  30                 stnsm   sys_msk-.base(%r13),0xf8        #disable DAT and IRQs
  31                 spx     zero64-.base(%r13)      #absolute addressing mode
  32                 stctg   %c0,%c15,ctlregs-.base(%r13)
  33                 stmg    %r0,%r15,gprregs-.base(%r13)
  34                 lghi    %r0,3
  35                 sllg    %r0,%r0,31
  36                 stg     %r0,0x1d0(%r0)
  37                 la      %r0,.back_pgm-.base(%r13)
  38                 stg     %r0,0x1d8(%r0)
  39                 la      %r1,load_psw-.base(%r13)
  40                 mvc     0(8,%r0),0(%r1)
  41                 la      %r0,.back-.base(%r13)
  42                 st      %r0,4(%r0)
  43                 oi      4(%r0),0x80
  44                 lghi    %r0,0
  45                 diag    %r0,%r0,0x308
  46         .back:
  47                 lhi     %r1,1           #mode 1 = esame
  48                 sigp    %r1,%r0,0x12    #switch to esame mode
  49                 sam64                   #switch to 64 bit addressing mode
  50                 basr    %r13,0
  51         .back_base:
  52                 oi      have_diag308-.back_base(%r13),0x01
  53                 lctlg   %c0,%c15,ctlregs-.back_base(%r13)
  54                 lmg     %r0,%r15,gprregs-.back_base(%r13)
  55                 j       .top
  56         .back_pgm:
  57                 lmg     %r0,%r15,gprregs-.base(%r13)
  58         .top:
  59                 lghi    %r7,4096        #load PAGE_SIZE in r7
  60                 lghi    %r9,4096        #load PAGE_SIZE in r9
  61                 lg      %r5,0(%r2)      #read another word for indirection page
  62                 aghi    %r2,8           #increment pointer
  63                 tml     %r5,0x1         #is it a destination page?
  64                 je      .indir_check    #NO, goto "indir_check"
  65                 lgr     %r6,%r5         #r6 = r5
  66                 nill    %r6,0xf000      #mask it out and...
  67                 j       .top            #...next iteration
  68         .indir_check:
  69                 tml     %r5,0x2         #is it a indirection page?
  70                 je      .done_test      #NO, goto "done_test"
  71                 nill    %r5,0xf000      #YES, mask out,
  72                 lgr     %r2,%r5         #move it into the right register,
  73                 j       .top            #and read next...
  74         .done_test:
  75                 tml     %r5,0x4         #is it the done indicator?
  76                 je      .source_test    #NO! Well, then it should be the source indicator...
  77                 j       .done           #ok, lets finish it here...
  78         .source_test:
  79                 tml     %r5,0x8         #it should be a source indicator...
  80                 je      .top            #NO, ignore it...
  81                 lgr     %r8,%r5         #r8 = r5
  82                 nill    %r8,0xf000      #masking
  83         0:      mvcle   %r6,%r8,0x0     #copy PAGE_SIZE bytes from r8 to r6 - pad with 0
  84                 jo      0b
  85                 j       .top
  86         .done:
  87                 sgr     %r0,%r0         #clear register r0
  88                 la      %r4,load_psw-.base(%r13)        #load psw-address into the register
  89                 o       %r3,4(%r4)      #or load address into psw
  90                 st      %r3,4(%r4)
  91                 mvc     0(8,%r0),0(%r4) #copy psw to absolute address 0
  92                 tm      have_diag308-.base(%r13),0x01
  93                 jno     .no_diag308
  94                 diag    %r0,%r0,0x308
  95         .no_diag308:
  96                 sam31                   #31 bit mode
  97                 sr      %r1,%r1         #erase register r1
  98                 sr      %r2,%r2         #erase register r2
  99                 sigp    %r1,%r2,0x12    #set cpuid to zero
 100                 lpsw    0               #hopefully start new kernel...
 101
 102                 .align  8
 103         zero64:
 104                 .quad   0
 105         load_psw:
 106                 .long   0x00080000,0x80000000
 107         sys_msk:
 108                 .quad   0
 109         ctlregs:
 110                 .rept   16
 111                 .quad   0
 112                 .endr
 113         gprregs:
 114                 .rept   16
 115                 .quad   0
 116                 .endr
 117         have_diag308:
 118                 .byte   0
 119                 .align  8
 120         relocate_kernel_end:
 121         .globl  relocate_kernel_len
 122         relocate_kernel_len:
 123                 .quad   relocate_kernel_end - relocate_kernel