Merge tag 'edac_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
[sfrench/cifs-2.6.git] / arch / s390 / kernel / perf_cpum_sf.c
1 /*
2  * Performance event support for the System z CPU-measurement Sampling Facility
3  *
4  * Copyright IBM Corp. 2013
5  * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License (version 2 only)
9  * as published by the Free Software Foundation.
10  */
11 #define KMSG_COMPONENT  "cpum_sf"
12 #define pr_fmt(fmt)     KMSG_COMPONENT ": " fmt
13
14 #include <linux/kernel.h>
15 #include <linux/kernel_stat.h>
16 #include <linux/perf_event.h>
17 #include <linux/percpu.h>
18 #include <linux/notifier.h>
19 #include <linux/export.h>
20 #include <linux/slab.h>
21 #include <linux/mm.h>
22 #include <linux/moduleparam.h>
23 #include <asm/cpu_mf.h>
24 #include <asm/irq.h>
25 #include <asm/debug.h>
26 #include <asm/timex.h>
27
28 /* Minimum number of sample-data-block-tables:
29  * At least one table is required for the sampling buffer structure.
30  * A single table contains up to 511 pointers to sample-data-blocks.
31  */
32 #define CPUM_SF_MIN_SDBT        1
33
34 /* Number of sample-data-blocks per sample-data-block-table (SDBT):
35  * A table contains SDB pointers (8 bytes) and one table-link entry
36  * that points to the origin of the next SDBT.
37  */
38 #define CPUM_SF_SDB_PER_TABLE   ((PAGE_SIZE - 8) / 8)
39
40 /* Maximum page offset for an SDBT table-link entry:
41  * If this page offset is reached, a table-link entry to the next SDBT
42  * must be added.
43  */
44 #define CPUM_SF_SDBT_TL_OFFSET  (CPUM_SF_SDB_PER_TABLE * 8)
45 static inline int require_table_link(const void *sdbt)
46 {
47         return ((unsigned long) sdbt & ~PAGE_MASK) == CPUM_SF_SDBT_TL_OFFSET;
48 }
49
50 /* Minimum and maximum sampling buffer sizes:
51  *
52  * This number represents the maximum size of the sampling buffer taking
53  * the number of sample-data-block-tables into account.  Note that these
54  * numbers apply to the basic-sampling function only.
55  * The maximum number of SDBs is increased by CPUM_SF_SDB_DIAG_FACTOR if
56  * the diagnostic-sampling function is active.
57  *
58  * Sampling buffer size         Buffer characteristics
59  * ---------------------------------------------------
60  *       64KB               ==    16 pages (4KB per page)
61  *                                 1 page  for SDB-tables
62  *                                15 pages for SDBs
63  *
64  *  32MB                    ==  8192 pages (4KB per page)
65  *                                16 pages for SDB-tables
66  *                              8176 pages for SDBs
67  */
68 static unsigned long __read_mostly CPUM_SF_MIN_SDB = 15;
69 static unsigned long __read_mostly CPUM_SF_MAX_SDB = 8176;
70 static unsigned long __read_mostly CPUM_SF_SDB_DIAG_FACTOR = 1;
71
72 struct sf_buffer {
73         unsigned long    *sdbt;     /* Sample-data-block-table origin */
74         /* buffer characteristics (required for buffer increments) */
75         unsigned long  num_sdb;     /* Number of sample-data-blocks */
76         unsigned long num_sdbt;     /* Number of sample-data-block-tables */
77         unsigned long    *tail;     /* last sample-data-block-table */
78 };
79
80 struct cpu_hw_sf {
81         /* CPU-measurement sampling information block */
82         struct hws_qsi_info_block qsi;
83         /* CPU-measurement sampling control block */
84         struct hws_lsctl_request_block lsctl;
85         struct sf_buffer sfb;       /* Sampling buffer */
86         unsigned int flags;         /* Status flags */
87         struct perf_event *event;   /* Scheduled perf event */
88 };
89 static DEFINE_PER_CPU(struct cpu_hw_sf, cpu_hw_sf);
90
91 /* Debug feature */
92 static debug_info_t *sfdbg;
93
94 /*
95  * sf_disable() - Switch off sampling facility
96  */
97 static int sf_disable(void)
98 {
99         struct hws_lsctl_request_block sreq;
100
101         memset(&sreq, 0, sizeof(sreq));
102         return lsctl(&sreq);
103 }
104
105 /*
106  * sf_buffer_available() - Check for an allocated sampling buffer
107  */
108 static int sf_buffer_available(struct cpu_hw_sf *cpuhw)
109 {
110         return !!cpuhw->sfb.sdbt;
111 }
112
113 /*
114  * deallocate sampling facility buffer
115  */
116 static void free_sampling_buffer(struct sf_buffer *sfb)
117 {
118         unsigned long *sdbt, *curr;
119
120         if (!sfb->sdbt)
121                 return;
122
123         sdbt = sfb->sdbt;
124         curr = sdbt;
125
126         /* Free the SDBT after all SDBs are processed... */
127         while (1) {
128                 if (!*curr || !sdbt)
129                         break;
130
131                 /* Process table-link entries */
132                 if (is_link_entry(curr)) {
133                         curr = get_next_sdbt(curr);
134                         if (sdbt)
135                                 free_page((unsigned long) sdbt);
136
137                         /* If the origin is reached, sampling buffer is freed */
138                         if (curr == sfb->sdbt)
139                                 break;
140                         else
141                                 sdbt = curr;
142                 } else {
143                         /* Process SDB pointer */
144                         if (*curr) {
145                                 free_page(*curr);
146                                 curr++;
147                         }
148                 }
149         }
150
151         debug_sprintf_event(sfdbg, 5,
152                             "free_sampling_buffer: freed sdbt=%p\n", sfb->sdbt);
153         memset(sfb, 0, sizeof(*sfb));
154 }
155
156 static int alloc_sample_data_block(unsigned long *sdbt, gfp_t gfp_flags)
157 {
158         unsigned long sdb, *trailer;
159
160         /* Allocate and initialize sample-data-block */
161         sdb = get_zeroed_page(gfp_flags);
162         if (!sdb)
163                 return -ENOMEM;
164         trailer = trailer_entry_ptr(sdb);
165         *trailer = SDB_TE_ALERT_REQ_MASK;
166
167         /* Link SDB into the sample-data-block-table */
168         *sdbt = sdb;
169
170         return 0;
171 }
172
173 /*
174  * realloc_sampling_buffer() - extend sampler memory
175  *
176  * Allocates new sample-data-blocks and adds them to the specified sampling
177  * buffer memory.
178  *
179  * Important: This modifies the sampling buffer and must be called when the
180  *            sampling facility is disabled.
181  *
182  * Returns zero on success, non-zero otherwise.
183  */
184 static int realloc_sampling_buffer(struct sf_buffer *sfb,
185                                    unsigned long num_sdb, gfp_t gfp_flags)
186 {
187         int i, rc;
188         unsigned long *new, *tail;
189
190         if (!sfb->sdbt || !sfb->tail)
191                 return -EINVAL;
192
193         if (!is_link_entry(sfb->tail))
194                 return -EINVAL;
195
196         /* Append to the existing sampling buffer, overwriting the table-link
197          * register.
198          * The tail variables always points to the "tail" (last and table-link)
199          * entry in an SDB-table.
200          */
201         tail = sfb->tail;
202
203         /* Do a sanity check whether the table-link entry points to
204          * the sampling buffer origin.
205          */
206         if (sfb->sdbt != get_next_sdbt(tail)) {
207                 debug_sprintf_event(sfdbg, 3, "realloc_sampling_buffer: "
208                                     "sampling buffer is not linked: origin=%p"
209                                     "tail=%p\n",
210                                     (void *) sfb->sdbt, (void *) tail);
211                 return -EINVAL;
212         }
213
214         /* Allocate remaining SDBs */
215         rc = 0;
216         for (i = 0; i < num_sdb; i++) {
217                 /* Allocate a new SDB-table if it is full. */
218                 if (require_table_link(tail)) {
219                         new = (unsigned long *) get_zeroed_page(gfp_flags);
220                         if (!new) {
221                                 rc = -ENOMEM;
222                                 break;
223                         }
224                         sfb->num_sdbt++;
225                         /* Link current page to tail of chain */
226                         *tail = (unsigned long)(void *) new + 1;
227                         tail = new;
228                 }
229
230                 /* Allocate a new sample-data-block.
231                  * If there is not enough memory, stop the realloc process
232                  * and simply use what was allocated.  If this is a temporary
233                  * issue, a new realloc call (if required) might succeed.
234                  */
235                 rc = alloc_sample_data_block(tail, gfp_flags);
236                 if (rc)
237                         break;
238                 sfb->num_sdb++;
239                 tail++;
240         }
241
242         /* Link sampling buffer to its origin */
243         *tail = (unsigned long) sfb->sdbt + 1;
244         sfb->tail = tail;
245
246         debug_sprintf_event(sfdbg, 4, "realloc_sampling_buffer: new buffer"
247                             " settings: sdbt=%lu sdb=%lu\n",
248                             sfb->num_sdbt, sfb->num_sdb);
249         return rc;
250 }
251
252 /*
253  * allocate_sampling_buffer() - allocate sampler memory
254  *
255  * Allocates and initializes a sampling buffer structure using the
256  * specified number of sample-data-blocks (SDB).  For each allocation,
257  * a 4K page is used.  The number of sample-data-block-tables (SDBT)
258  * are calculated from SDBs.
259  * Also set the ALERT_REQ mask in each SDBs trailer.
260  *
261  * Returns zero on success, non-zero otherwise.
262  */
263 static int alloc_sampling_buffer(struct sf_buffer *sfb, unsigned long num_sdb)
264 {
265         int rc;
266
267         if (sfb->sdbt)
268                 return -EINVAL;
269
270         /* Allocate the sample-data-block-table origin */
271         sfb->sdbt = (unsigned long *) get_zeroed_page(GFP_KERNEL);
272         if (!sfb->sdbt)
273                 return -ENOMEM;
274         sfb->num_sdb = 0;
275         sfb->num_sdbt = 1;
276
277         /* Link the table origin to point to itself to prepare for
278          * realloc_sampling_buffer() invocation.
279          */
280         sfb->tail = sfb->sdbt;
281         *sfb->tail = (unsigned long)(void *) sfb->sdbt + 1;
282
283         /* Allocate requested number of sample-data-blocks */
284         rc = realloc_sampling_buffer(sfb, num_sdb, GFP_KERNEL);
285         if (rc) {
286                 free_sampling_buffer(sfb);
287                 debug_sprintf_event(sfdbg, 4, "alloc_sampling_buffer: "
288                         "realloc_sampling_buffer failed with rc=%i\n", rc);
289         } else
290                 debug_sprintf_event(sfdbg, 4,
291                         "alloc_sampling_buffer: tear=%p dear=%p\n",
292                         sfb->sdbt, (void *) *sfb->sdbt);
293         return rc;
294 }
295
296 static void sfb_set_limits(unsigned long min, unsigned long max)
297 {
298         struct hws_qsi_info_block si;
299
300         CPUM_SF_MIN_SDB = min;
301         CPUM_SF_MAX_SDB = max;
302
303         memset(&si, 0, sizeof(si));
304         if (!qsi(&si))
305                 CPUM_SF_SDB_DIAG_FACTOR = DIV_ROUND_UP(si.dsdes, si.bsdes);
306 }
307
308 static unsigned long sfb_max_limit(struct hw_perf_event *hwc)
309 {
310         return SAMPL_DIAG_MODE(hwc) ? CPUM_SF_MAX_SDB * CPUM_SF_SDB_DIAG_FACTOR
311                                     : CPUM_SF_MAX_SDB;
312 }
313
314 static unsigned long sfb_pending_allocs(struct sf_buffer *sfb,
315                                         struct hw_perf_event *hwc)
316 {
317         if (!sfb->sdbt)
318                 return SFB_ALLOC_REG(hwc);
319         if (SFB_ALLOC_REG(hwc) > sfb->num_sdb)
320                 return SFB_ALLOC_REG(hwc) - sfb->num_sdb;
321         return 0;
322 }
323
324 static int sfb_has_pending_allocs(struct sf_buffer *sfb,
325                                    struct hw_perf_event *hwc)
326 {
327         return sfb_pending_allocs(sfb, hwc) > 0;
328 }
329
330 static void sfb_account_allocs(unsigned long num, struct hw_perf_event *hwc)
331 {
332         /* Limit the number of SDBs to not exceed the maximum */
333         num = min_t(unsigned long, num, sfb_max_limit(hwc) - SFB_ALLOC_REG(hwc));
334         if (num)
335                 SFB_ALLOC_REG(hwc) += num;
336 }
337
338 static void sfb_init_allocs(unsigned long num, struct hw_perf_event *hwc)
339 {
340         SFB_ALLOC_REG(hwc) = 0;
341         sfb_account_allocs(num, hwc);
342 }
343
344 static size_t event_sample_size(struct hw_perf_event *hwc)
345 {
346         struct sf_raw_sample *sfr = (struct sf_raw_sample *) RAWSAMPLE_REG(hwc);
347         size_t sample_size;
348
349         /* The sample size depends on the sampling function: The basic-sampling
350          * function must be always enabled, diagnostic-sampling function is
351          * optional.
352          */
353         sample_size = sfr->bsdes;
354         if (SAMPL_DIAG_MODE(hwc))
355                 sample_size += sfr->dsdes;
356
357         return sample_size;
358 }
359
360 static void deallocate_buffers(struct cpu_hw_sf *cpuhw)
361 {
362         if (cpuhw->sfb.sdbt)
363                 free_sampling_buffer(&cpuhw->sfb);
364 }
365
366 static int allocate_buffers(struct cpu_hw_sf *cpuhw, struct hw_perf_event *hwc)
367 {
368         unsigned long n_sdb, freq, factor;
369         size_t sfr_size, sample_size;
370         struct sf_raw_sample *sfr;
371
372         /* Allocate raw sample buffer
373          *
374          *    The raw sample buffer is used to temporarily store sampling data
375          *    entries for perf raw sample processing.  The buffer size mainly
376          *    depends on the size of diagnostic-sampling data entries which is
377          *    machine-specific.  The exact size calculation includes:
378          *      1. The first 4 bytes of diagnostic-sampling data entries are
379          *         already reflected in the sf_raw_sample structure.  Subtract
380          *         these bytes.
381          *      2. The perf raw sample data must be 8-byte aligned (u64) and
382          *         perf's internal data size must be considered too.  So add
383          *         an additional u32 for correct alignment and subtract before
384          *         allocating the buffer.
385          *      3. Store the raw sample buffer pointer in the perf event
386          *         hardware structure.
387          */
388         sfr_size = ALIGN((sizeof(*sfr) - sizeof(sfr->diag) + cpuhw->qsi.dsdes) +
389                          sizeof(u32), sizeof(u64));
390         sfr_size -= sizeof(u32);
391         sfr = kzalloc(sfr_size, GFP_KERNEL);
392         if (!sfr)
393                 return -ENOMEM;
394         sfr->size = sfr_size;
395         sfr->bsdes = cpuhw->qsi.bsdes;
396         sfr->dsdes = cpuhw->qsi.dsdes;
397         RAWSAMPLE_REG(hwc) = (unsigned long) sfr;
398
399         /* Calculate sampling buffers using 4K pages
400          *
401          *    1. Determine the sample data size which depends on the used
402          *       sampling functions, for example, basic-sampling or
403          *       basic-sampling with diagnostic-sampling.
404          *
405          *    2. Use the sampling frequency as input.  The sampling buffer is
406          *       designed for almost one second.  This can be adjusted through
407          *       the "factor" variable.
408          *       In any case, alloc_sampling_buffer() sets the Alert Request
409          *       Control indicator to trigger a measurement-alert to harvest
410          *       sample-data-blocks (sdb).
411          *
412          *    3. Compute the number of sample-data-blocks and ensure a minimum
413          *       of CPUM_SF_MIN_SDB.  Also ensure the upper limit does not
414          *       exceed a "calculated" maximum.  The symbolic maximum is
415          *       designed for basic-sampling only and needs to be increased if
416          *       diagnostic-sampling is active.
417          *       See also the remarks for these symbolic constants.
418          *
419          *    4. Compute the number of sample-data-block-tables (SDBT) and
420          *       ensure a minimum of CPUM_SF_MIN_SDBT (one table can manage up
421          *       to 511 SDBs).
422          */
423         sample_size = event_sample_size(hwc);
424         freq = sample_rate_to_freq(&cpuhw->qsi, SAMPL_RATE(hwc));
425         factor = 1;
426         n_sdb = DIV_ROUND_UP(freq, factor * ((PAGE_SIZE-64) / sample_size));
427         if (n_sdb < CPUM_SF_MIN_SDB)
428                 n_sdb = CPUM_SF_MIN_SDB;
429
430         /* If there is already a sampling buffer allocated, it is very likely
431          * that the sampling facility is enabled too.  If the event to be
432          * initialized requires a greater sampling buffer, the allocation must
433          * be postponed.  Changing the sampling buffer requires the sampling
434          * facility to be in the disabled state.  So, account the number of
435          * required SDBs and let cpumsf_pmu_enable() resize the buffer just
436          * before the event is started.
437          */
438         sfb_init_allocs(n_sdb, hwc);
439         if (sf_buffer_available(cpuhw))
440                 return 0;
441
442         debug_sprintf_event(sfdbg, 3,
443                             "allocate_buffers: rate=%lu f=%lu sdb=%lu/%lu"
444                             " sample_size=%lu cpuhw=%p\n",
445                             SAMPL_RATE(hwc), freq, n_sdb, sfb_max_limit(hwc),
446                             sample_size, cpuhw);
447
448         return alloc_sampling_buffer(&cpuhw->sfb,
449                                      sfb_pending_allocs(&cpuhw->sfb, hwc));
450 }
451
452 static unsigned long min_percent(unsigned int percent, unsigned long base,
453                                  unsigned long min)
454 {
455         return min_t(unsigned long, min, DIV_ROUND_UP(percent * base, 100));
456 }
457
458 static unsigned long compute_sfb_extent(unsigned long ratio, unsigned long base)
459 {
460         /* Use a percentage-based approach to extend the sampling facility
461          * buffer.  Accept up to 5% sample data loss.
462          * Vary the extents between 1% to 5% of the current number of
463          * sample-data-blocks.
464          */
465         if (ratio <= 5)
466                 return 0;
467         if (ratio <= 25)
468                 return min_percent(1, base, 1);
469         if (ratio <= 50)
470                 return min_percent(1, base, 1);
471         if (ratio <= 75)
472                 return min_percent(2, base, 2);
473         if (ratio <= 100)
474                 return min_percent(3, base, 3);
475         if (ratio <= 250)
476                 return min_percent(4, base, 4);
477
478         return min_percent(5, base, 8);
479 }
480
481 static void sfb_account_overflows(struct cpu_hw_sf *cpuhw,
482                                   struct hw_perf_event *hwc)
483 {
484         unsigned long ratio, num;
485
486         if (!OVERFLOW_REG(hwc))
487                 return;
488
489         /* The sample_overflow contains the average number of sample data
490          * that has been lost because sample-data-blocks were full.
491          *
492          * Calculate the total number of sample data entries that has been
493          * discarded.  Then calculate the ratio of lost samples to total samples
494          * per second in percent.
495          */
496         ratio = DIV_ROUND_UP(100 * OVERFLOW_REG(hwc) * cpuhw->sfb.num_sdb,
497                              sample_rate_to_freq(&cpuhw->qsi, SAMPL_RATE(hwc)));
498
499         /* Compute number of sample-data-blocks */
500         num = compute_sfb_extent(ratio, cpuhw->sfb.num_sdb);
501         if (num)
502                 sfb_account_allocs(num, hwc);
503
504         debug_sprintf_event(sfdbg, 5, "sfb: overflow: overflow=%llu ratio=%lu"
505                             " num=%lu\n", OVERFLOW_REG(hwc), ratio, num);
506         OVERFLOW_REG(hwc) = 0;
507 }
508
509 /* extend_sampling_buffer() - Extend sampling buffer
510  * @sfb:        Sampling buffer structure (for local CPU)
511  * @hwc:        Perf event hardware structure
512  *
513  * Use this function to extend the sampling buffer based on the overflow counter
514  * and postponed allocation extents stored in the specified Perf event hardware.
515  *
516  * Important: This function disables the sampling facility in order to safely
517  *            change the sampling buffer structure.  Do not call this function
518  *            when the PMU is active.
519  */
520 static void extend_sampling_buffer(struct sf_buffer *sfb,
521                                    struct hw_perf_event *hwc)
522 {
523         unsigned long num, num_old;
524         int rc;
525
526         num = sfb_pending_allocs(sfb, hwc);
527         if (!num)
528                 return;
529         num_old = sfb->num_sdb;
530
531         /* Disable the sampling facility to reset any states and also
532          * clear pending measurement alerts.
533          */
534         sf_disable();
535
536         /* Extend the sampling buffer.
537          * This memory allocation typically happens in an atomic context when
538          * called by perf.  Because this is a reallocation, it is fine if the
539          * new SDB-request cannot be satisfied immediately.
540          */
541         rc = realloc_sampling_buffer(sfb, num, GFP_ATOMIC);
542         if (rc)
543                 debug_sprintf_event(sfdbg, 5, "sfb: extend: realloc "
544                                     "failed with rc=%i\n", rc);
545
546         if (sfb_has_pending_allocs(sfb, hwc))
547                 debug_sprintf_event(sfdbg, 5, "sfb: extend: "
548                                     "req=%lu alloc=%lu remaining=%lu\n",
549                                     num, sfb->num_sdb - num_old,
550                                     sfb_pending_allocs(sfb, hwc));
551 }
552
553
554 /* Number of perf events counting hardware events */
555 static atomic_t num_events;
556 /* Used to avoid races in calling reserve/release_cpumf_hardware */
557 static DEFINE_MUTEX(pmc_reserve_mutex);
558
559 #define PMC_INIT      0
560 #define PMC_RELEASE   1
561 #define PMC_FAILURE   2
562 static void setup_pmc_cpu(void *flags)
563 {
564         int err;
565         struct cpu_hw_sf *cpusf = this_cpu_ptr(&cpu_hw_sf);
566
567         err = 0;
568         switch (*((int *) flags)) {
569         case PMC_INIT:
570                 memset(cpusf, 0, sizeof(*cpusf));
571                 err = qsi(&cpusf->qsi);
572                 if (err)
573                         break;
574                 cpusf->flags |= PMU_F_RESERVED;
575                 err = sf_disable();
576                 if (err)
577                         pr_err("Switching off the sampling facility failed "
578                                "with rc=%i\n", err);
579                 debug_sprintf_event(sfdbg, 5,
580                                     "setup_pmc_cpu: initialized: cpuhw=%p\n", cpusf);
581                 break;
582         case PMC_RELEASE:
583                 cpusf->flags &= ~PMU_F_RESERVED;
584                 err = sf_disable();
585                 if (err) {
586                         pr_err("Switching off the sampling facility failed "
587                                "with rc=%i\n", err);
588                 } else
589                         deallocate_buffers(cpusf);
590                 debug_sprintf_event(sfdbg, 5,
591                                     "setup_pmc_cpu: released: cpuhw=%p\n", cpusf);
592                 break;
593         }
594         if (err)
595                 *((int *) flags) |= PMC_FAILURE;
596 }
597
598 static void release_pmc_hardware(void)
599 {
600         int flags = PMC_RELEASE;
601
602         irq_subclass_unregister(IRQ_SUBCLASS_MEASUREMENT_ALERT);
603         on_each_cpu(setup_pmc_cpu, &flags, 1);
604 }
605
606 static int reserve_pmc_hardware(void)
607 {
608         int flags = PMC_INIT;
609
610         on_each_cpu(setup_pmc_cpu, &flags, 1);
611         if (flags & PMC_FAILURE) {
612                 release_pmc_hardware();
613                 return -ENODEV;
614         }
615         irq_subclass_register(IRQ_SUBCLASS_MEASUREMENT_ALERT);
616
617         return 0;
618 }
619
620 static void hw_perf_event_destroy(struct perf_event *event)
621 {
622         /* Free raw sample buffer */
623         if (RAWSAMPLE_REG(&event->hw))
624                 kfree((void *) RAWSAMPLE_REG(&event->hw));
625
626         /* Release PMC if this is the last perf event */
627         if (!atomic_add_unless(&num_events, -1, 1)) {
628                 mutex_lock(&pmc_reserve_mutex);
629                 if (atomic_dec_return(&num_events) == 0)
630                         release_pmc_hardware();
631                 mutex_unlock(&pmc_reserve_mutex);
632         }
633 }
634
635 static void hw_init_period(struct hw_perf_event *hwc, u64 period)
636 {
637         hwc->sample_period = period;
638         hwc->last_period = hwc->sample_period;
639         local64_set(&hwc->period_left, hwc->sample_period);
640 }
641
642 static void hw_reset_registers(struct hw_perf_event *hwc,
643                                unsigned long *sdbt_origin)
644 {
645         struct sf_raw_sample *sfr;
646
647         /* (Re)set to first sample-data-block-table */
648         TEAR_REG(hwc) = (unsigned long) sdbt_origin;
649
650         /* (Re)set raw sampling buffer register */
651         sfr = (struct sf_raw_sample *) RAWSAMPLE_REG(hwc);
652         memset(&sfr->basic, 0, sizeof(sfr->basic));
653         memset(&sfr->diag, 0, sfr->dsdes);
654 }
655
656 static unsigned long hw_limit_rate(const struct hws_qsi_info_block *si,
657                                    unsigned long rate)
658 {
659         return clamp_t(unsigned long, rate,
660                        si->min_sampl_rate, si->max_sampl_rate);
661 }
662
663 static int __hw_perf_event_init(struct perf_event *event)
664 {
665         struct cpu_hw_sf *cpuhw;
666         struct hws_qsi_info_block si;
667         struct perf_event_attr *attr = &event->attr;
668         struct hw_perf_event *hwc = &event->hw;
669         unsigned long rate;
670         int cpu, err;
671
672         /* Reserve CPU-measurement sampling facility */
673         err = 0;
674         if (!atomic_inc_not_zero(&num_events)) {
675                 mutex_lock(&pmc_reserve_mutex);
676                 if (atomic_read(&num_events) == 0 && reserve_pmc_hardware())
677                         err = -EBUSY;
678                 else
679                         atomic_inc(&num_events);
680                 mutex_unlock(&pmc_reserve_mutex);
681         }
682         event->destroy = hw_perf_event_destroy;
683
684         if (err)
685                 goto out;
686
687         /* Access per-CPU sampling information (query sampling info) */
688         /*
689          * The event->cpu value can be -1 to count on every CPU, for example,
690          * when attaching to a task.  If this is specified, use the query
691          * sampling info from the current CPU, otherwise use event->cpu to
692          * retrieve the per-CPU information.
693          * Later, cpuhw indicates whether to allocate sampling buffers for a
694          * particular CPU (cpuhw!=NULL) or each online CPU (cpuw==NULL).
695          */
696         memset(&si, 0, sizeof(si));
697         cpuhw = NULL;
698         if (event->cpu == -1)
699                 qsi(&si);
700         else {
701                 /* Event is pinned to a particular CPU, retrieve the per-CPU
702                  * sampling structure for accessing the CPU-specific QSI.
703                  */
704                 cpuhw = &per_cpu(cpu_hw_sf, event->cpu);
705                 si = cpuhw->qsi;
706         }
707
708         /* Check sampling facility authorization and, if not authorized,
709          * fall back to other PMUs.  It is safe to check any CPU because
710          * the authorization is identical for all configured CPUs.
711          */
712         if (!si.as) {
713                 err = -ENOENT;
714                 goto out;
715         }
716
717         /* Always enable basic sampling */
718         SAMPL_FLAGS(hwc) = PERF_CPUM_SF_BASIC_MODE;
719
720         /* Check if diagnostic sampling is requested.  Deny if the required
721          * sampling authorization is missing.
722          */
723         if (attr->config == PERF_EVENT_CPUM_SF_DIAG) {
724                 if (!si.ad) {
725                         err = -EPERM;
726                         goto out;
727                 }
728                 SAMPL_FLAGS(hwc) |= PERF_CPUM_SF_DIAG_MODE;
729         }
730
731         /* Check and set other sampling flags */
732         if (attr->config1 & PERF_CPUM_SF_FULL_BLOCKS)
733                 SAMPL_FLAGS(hwc) |= PERF_CPUM_SF_FULL_BLOCKS;
734
735         /* The sampling information (si) contains information about the
736          * min/max sampling intervals and the CPU speed.  So calculate the
737          * correct sampling interval and avoid the whole period adjust
738          * feedback loop.
739          */
740         rate = 0;
741         if (attr->freq) {
742                 rate = freq_to_sample_rate(&si, attr->sample_freq);
743                 rate = hw_limit_rate(&si, rate);
744                 attr->freq = 0;
745                 attr->sample_period = rate;
746         } else {
747                 /* The min/max sampling rates specifies the valid range
748                  * of sample periods.  If the specified sample period is
749                  * out of range, limit the period to the range boundary.
750                  */
751                 rate = hw_limit_rate(&si, hwc->sample_period);
752
753                 /* The perf core maintains a maximum sample rate that is
754                  * configurable through the sysctl interface.  Ensure the
755                  * sampling rate does not exceed this value.  This also helps
756                  * to avoid throttling when pushing samples with
757                  * perf_event_overflow().
758                  */
759                 if (sample_rate_to_freq(&si, rate) >
760                       sysctl_perf_event_sample_rate) {
761                         err = -EINVAL;
762                         debug_sprintf_event(sfdbg, 1, "Sampling rate exceeds maximum perf sample rate\n");
763                         goto out;
764                 }
765         }
766         SAMPL_RATE(hwc) = rate;
767         hw_init_period(hwc, SAMPL_RATE(hwc));
768
769         /* Initialize sample data overflow accounting */
770         hwc->extra_reg.reg = REG_OVERFLOW;
771         OVERFLOW_REG(hwc) = 0;
772
773         /* Allocate the per-CPU sampling buffer using the CPU information
774          * from the event.  If the event is not pinned to a particular
775          * CPU (event->cpu == -1; or cpuhw == NULL), allocate sampling
776          * buffers for each online CPU.
777          */
778         if (cpuhw)
779                 /* Event is pinned to a particular CPU */
780                 err = allocate_buffers(cpuhw, hwc);
781         else {
782                 /* Event is not pinned, allocate sampling buffer on
783                  * each online CPU
784                  */
785                 for_each_online_cpu(cpu) {
786                         cpuhw = &per_cpu(cpu_hw_sf, cpu);
787                         err = allocate_buffers(cpuhw, hwc);
788                         if (err)
789                                 break;
790                 }
791         }
792 out:
793         return err;
794 }
795
796 static int cpumsf_pmu_event_init(struct perf_event *event)
797 {
798         int err;
799
800         /* No support for taken branch sampling */
801         if (has_branch_stack(event))
802                 return -EOPNOTSUPP;
803
804         switch (event->attr.type) {
805         case PERF_TYPE_RAW:
806                 if ((event->attr.config != PERF_EVENT_CPUM_SF) &&
807                     (event->attr.config != PERF_EVENT_CPUM_SF_DIAG))
808                         return -ENOENT;
809                 break;
810         case PERF_TYPE_HARDWARE:
811                 /* Support sampling of CPU cycles in addition to the
812                  * counter facility.  However, the counter facility
813                  * is more precise and, hence, restrict this PMU to
814                  * sampling events only.
815                  */
816                 if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES)
817                         return -ENOENT;
818                 if (!is_sampling_event(event))
819                         return -ENOENT;
820                 break;
821         default:
822                 return -ENOENT;
823         }
824
825         /* Check online status of the CPU to which the event is pinned */
826         if (event->cpu >= nr_cpumask_bits ||
827             (event->cpu >= 0 && !cpu_online(event->cpu)))
828                 return -ENODEV;
829
830         /* Force reset of idle/hv excludes regardless of what the
831          * user requested.
832          */
833         if (event->attr.exclude_hv)
834                 event->attr.exclude_hv = 0;
835         if (event->attr.exclude_idle)
836                 event->attr.exclude_idle = 0;
837
838         err = __hw_perf_event_init(event);
839         if (unlikely(err))
840                 if (event->destroy)
841                         event->destroy(event);
842         return err;
843 }
844
845 static void cpumsf_pmu_enable(struct pmu *pmu)
846 {
847         struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf);
848         struct hw_perf_event *hwc;
849         int err;
850
851         if (cpuhw->flags & PMU_F_ENABLED)
852                 return;
853
854         if (cpuhw->flags & PMU_F_ERR_MASK)
855                 return;
856
857         /* Check whether to extent the sampling buffer.
858          *
859          * Two conditions trigger an increase of the sampling buffer for a
860          * perf event:
861          *    1. Postponed buffer allocations from the event initialization.
862          *    2. Sampling overflows that contribute to pending allocations.
863          *
864          * Note that the extend_sampling_buffer() function disables the sampling
865          * facility, but it can be fully re-enabled using sampling controls that
866          * have been saved in cpumsf_pmu_disable().
867          */
868         if (cpuhw->event) {
869                 hwc = &cpuhw->event->hw;
870                 /* Account number of overflow-designated buffer extents */
871                 sfb_account_overflows(cpuhw, hwc);
872                 if (sfb_has_pending_allocs(&cpuhw->sfb, hwc))
873                         extend_sampling_buffer(&cpuhw->sfb, hwc);
874         }
875
876         /* (Re)enable the PMU and sampling facility */
877         cpuhw->flags |= PMU_F_ENABLED;
878         barrier();
879
880         err = lsctl(&cpuhw->lsctl);
881         if (err) {
882                 cpuhw->flags &= ~PMU_F_ENABLED;
883                 pr_err("Loading sampling controls failed: op=%i err=%i\n",
884                         1, err);
885                 return;
886         }
887
888         debug_sprintf_event(sfdbg, 6, "pmu_enable: es=%i cs=%i ed=%i cd=%i "
889                             "tear=%p dear=%p\n", cpuhw->lsctl.es, cpuhw->lsctl.cs,
890                             cpuhw->lsctl.ed, cpuhw->lsctl.cd,
891                             (void *) cpuhw->lsctl.tear, (void *) cpuhw->lsctl.dear);
892 }
893
894 static void cpumsf_pmu_disable(struct pmu *pmu)
895 {
896         struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf);
897         struct hws_lsctl_request_block inactive;
898         struct hws_qsi_info_block si;
899         int err;
900
901         if (!(cpuhw->flags & PMU_F_ENABLED))
902                 return;
903
904         if (cpuhw->flags & PMU_F_ERR_MASK)
905                 return;
906
907         /* Switch off sampling activation control */
908         inactive = cpuhw->lsctl;
909         inactive.cs = 0;
910         inactive.cd = 0;
911
912         err = lsctl(&inactive);
913         if (err) {
914                 pr_err("Loading sampling controls failed: op=%i err=%i\n",
915                         2, err);
916                 return;
917         }
918
919         /* Save state of TEAR and DEAR register contents */
920         if (!qsi(&si)) {
921                 /* TEAR/DEAR values are valid only if the sampling facility is
922                  * enabled.  Note that cpumsf_pmu_disable() might be called even
923                  * for a disabled sampling facility because cpumsf_pmu_enable()
924                  * controls the enable/disable state.
925                  */
926                 if (si.es) {
927                         cpuhw->lsctl.tear = si.tear;
928                         cpuhw->lsctl.dear = si.dear;
929                 }
930         } else
931                 debug_sprintf_event(sfdbg, 3, "cpumsf_pmu_disable: "
932                                     "qsi() failed with err=%i\n", err);
933
934         cpuhw->flags &= ~PMU_F_ENABLED;
935 }
936
937 /* perf_exclude_event() - Filter event
938  * @event:      The perf event
939  * @regs:       pt_regs structure
940  * @sde_regs:   Sample-data-entry (sde) regs structure
941  *
942  * Filter perf events according to their exclude specification.
943  *
944  * Return non-zero if the event shall be excluded.
945  */
946 static int perf_exclude_event(struct perf_event *event, struct pt_regs *regs,
947                               struct perf_sf_sde_regs *sde_regs)
948 {
949         if (event->attr.exclude_user && user_mode(regs))
950                 return 1;
951         if (event->attr.exclude_kernel && !user_mode(regs))
952                 return 1;
953         if (event->attr.exclude_guest && sde_regs->in_guest)
954                 return 1;
955         if (event->attr.exclude_host && !sde_regs->in_guest)
956                 return 1;
957         return 0;
958 }
959
960 /* perf_push_sample() - Push samples to perf
961  * @event:      The perf event
962  * @sample:     Hardware sample data
963  *
964  * Use the hardware sample data to create perf event sample.  The sample
965  * is the pushed to the event subsystem and the function checks for
966  * possible event overflows.  If an event overflow occurs, the PMU is
967  * stopped.
968  *
969  * Return non-zero if an event overflow occurred.
970  */
971 static int perf_push_sample(struct perf_event *event, struct sf_raw_sample *sfr)
972 {
973         int overflow;
974         struct pt_regs regs;
975         struct perf_sf_sde_regs *sde_regs;
976         struct perf_sample_data data;
977         struct perf_raw_record raw = {
978                 .frag = {
979                         .size = sfr->size,
980                         .data = sfr,
981                 },
982         };
983
984         /* Setup perf sample */
985         perf_sample_data_init(&data, 0, event->hw.last_period);
986         data.raw = &raw;
987
988         /* Setup pt_regs to look like an CPU-measurement external interrupt
989          * using the Program Request Alert code.  The regs.int_parm_long
990          * field which is unused contains additional sample-data-entry related
991          * indicators.
992          */
993         memset(&regs, 0, sizeof(regs));
994         regs.int_code = 0x1407;
995         regs.int_parm = CPU_MF_INT_SF_PRA;
996         sde_regs = (struct perf_sf_sde_regs *) &regs.int_parm_long;
997
998         regs.psw.addr = sfr->basic.ia;
999         if (sfr->basic.T)
1000                 regs.psw.mask |= PSW_MASK_DAT;
1001         if (sfr->basic.W)
1002                 regs.psw.mask |= PSW_MASK_WAIT;
1003         if (sfr->basic.P)
1004                 regs.psw.mask |= PSW_MASK_PSTATE;
1005         switch (sfr->basic.AS) {
1006         case 0x0:
1007                 regs.psw.mask |= PSW_ASC_PRIMARY;
1008                 break;
1009         case 0x1:
1010                 regs.psw.mask |= PSW_ASC_ACCREG;
1011                 break;
1012         case 0x2:
1013                 regs.psw.mask |= PSW_ASC_SECONDARY;
1014                 break;
1015         case 0x3:
1016                 regs.psw.mask |= PSW_ASC_HOME;
1017                 break;
1018         }
1019
1020         /*
1021          * A non-zero guest program parameter indicates a guest
1022          * sample.
1023          * Note that some early samples or samples from guests without
1024          * lpp usage would be misaccounted to the host. We use the asn
1025          * value as a heuristic to detect most of these guest samples.
1026          * If the value differs from the host hpp value, we assume
1027          * it to be a KVM guest.
1028          */
1029         if (sfr->basic.gpp || sfr->basic.prim_asn != (u16) sfr->basic.hpp)
1030                 sde_regs->in_guest = 1;
1031
1032         overflow = 0;
1033         if (perf_exclude_event(event, &regs, sde_regs))
1034                 goto out;
1035         if (perf_event_overflow(event, &data, &regs)) {
1036                 overflow = 1;
1037                 event->pmu->stop(event, 0);
1038         }
1039         perf_event_update_userpage(event);
1040 out:
1041         return overflow;
1042 }
1043
1044 static void perf_event_count_update(struct perf_event *event, u64 count)
1045 {
1046         local64_add(count, &event->count);
1047 }
1048
1049 static int sample_format_is_valid(struct hws_combined_entry *sample,
1050                                    unsigned int flags)
1051 {
1052         if (likely(flags & PERF_CPUM_SF_BASIC_MODE))
1053                 /* Only basic-sampling data entries with data-entry-format
1054                  * version of 0x0001 can be processed.
1055                  */
1056                 if (sample->basic.def != 0x0001)
1057                         return 0;
1058         if (flags & PERF_CPUM_SF_DIAG_MODE)
1059                 /* The data-entry-format number of diagnostic-sampling data
1060                  * entries can vary.  Because diagnostic data is just passed
1061                  * through, do only a sanity check on the DEF.
1062                  */
1063                 if (sample->diag.def < 0x8001)
1064                         return 0;
1065         return 1;
1066 }
1067
1068 static int sample_is_consistent(struct hws_combined_entry *sample,
1069                                 unsigned long flags)
1070 {
1071         /* This check applies only to basic-sampling data entries of potentially
1072          * combined-sampling data entries.  Invalid entries cannot be processed
1073          * by the PMU and, thus, do not deliver an associated
1074          * diagnostic-sampling data entry.
1075          */
1076         if (unlikely(!(flags & PERF_CPUM_SF_BASIC_MODE)))
1077                 return 0;
1078         /*
1079          * Samples are skipped, if they are invalid or for which the
1080          * instruction address is not predictable, i.e., the wait-state bit is
1081          * set.
1082          */
1083         if (sample->basic.I || sample->basic.W)
1084                 return 0;
1085         return 1;
1086 }
1087
1088 static void reset_sample_slot(struct hws_combined_entry *sample,
1089                               unsigned long flags)
1090 {
1091         if (likely(flags & PERF_CPUM_SF_BASIC_MODE))
1092                 sample->basic.def = 0;
1093         if (flags & PERF_CPUM_SF_DIAG_MODE)
1094                 sample->diag.def = 0;
1095 }
1096
1097 static void sfr_store_sample(struct sf_raw_sample *sfr,
1098                              struct hws_combined_entry *sample)
1099 {
1100         if (likely(sfr->format & PERF_CPUM_SF_BASIC_MODE))
1101                 sfr->basic = sample->basic;
1102         if (sfr->format & PERF_CPUM_SF_DIAG_MODE)
1103                 memcpy(&sfr->diag, &sample->diag, sfr->dsdes);
1104 }
1105
1106 static void debug_sample_entry(struct hws_combined_entry *sample,
1107                                struct hws_trailer_entry *te,
1108                                unsigned long flags)
1109 {
1110         debug_sprintf_event(sfdbg, 4, "hw_collect_samples: Found unknown "
1111                             "sampling data entry: te->f=%i basic.def=%04x (%p)"
1112                             " diag.def=%04x (%p)\n", te->f,
1113                             sample->basic.def, &sample->basic,
1114                             (flags & PERF_CPUM_SF_DIAG_MODE)
1115                                         ? sample->diag.def : 0xFFFF,
1116                             (flags & PERF_CPUM_SF_DIAG_MODE)
1117                                         ?  &sample->diag : NULL);
1118 }
1119
1120 /* hw_collect_samples() - Walk through a sample-data-block and collect samples
1121  * @event:      The perf event
1122  * @sdbt:       Sample-data-block table
1123  * @overflow:   Event overflow counter
1124  *
1125  * Walks through a sample-data-block and collects sampling data entries that are
1126  * then pushed to the perf event subsystem.  Depending on the sampling function,
1127  * there can be either basic-sampling or combined-sampling data entries.  A
1128  * combined-sampling data entry consists of a basic- and a diagnostic-sampling
1129  * data entry.  The sampling function is determined by the flags in the perf
1130  * event hardware structure.  The function always works with a combined-sampling
1131  * data entry but ignores the the diagnostic portion if it is not available.
1132  *
1133  * Note that the implementation focuses on basic-sampling data entries and, if
1134  * such an entry is not valid, the entire combined-sampling data entry is
1135  * ignored.
1136  *
1137  * The overflow variables counts the number of samples that has been discarded
1138  * due to a perf event overflow.
1139  */
1140 static void hw_collect_samples(struct perf_event *event, unsigned long *sdbt,
1141                                unsigned long long *overflow)
1142 {
1143         unsigned long flags = SAMPL_FLAGS(&event->hw);
1144         struct hws_combined_entry *sample;
1145         struct hws_trailer_entry *te;
1146         struct sf_raw_sample *sfr;
1147         size_t sample_size;
1148
1149         /* Prepare and initialize raw sample data */
1150         sfr = (struct sf_raw_sample *) RAWSAMPLE_REG(&event->hw);
1151         sfr->format = flags & PERF_CPUM_SF_MODE_MASK;
1152
1153         sample_size = event_sample_size(&event->hw);
1154         te = (struct hws_trailer_entry *) trailer_entry_ptr(*sdbt);
1155         sample = (struct hws_combined_entry *) *sdbt;
1156         while ((unsigned long *) sample < (unsigned long *) te) {
1157                 /* Check for an empty sample */
1158                 if (!sample->basic.def)
1159                         break;
1160
1161                 /* Update perf event period */
1162                 perf_event_count_update(event, SAMPL_RATE(&event->hw));
1163
1164                 /* Check sampling data entry */
1165                 if (sample_format_is_valid(sample, flags)) {
1166                         /* If an event overflow occurred, the PMU is stopped to
1167                          * throttle event delivery.  Remaining sample data is
1168                          * discarded.
1169                          */
1170                         if (!*overflow) {
1171                                 if (sample_is_consistent(sample, flags)) {
1172                                         /* Deliver sample data to perf */
1173                                         sfr_store_sample(sfr, sample);
1174                                         *overflow = perf_push_sample(event, sfr);
1175                                 }
1176                         } else
1177                                 /* Count discarded samples */
1178                                 *overflow += 1;
1179                 } else {
1180                         debug_sample_entry(sample, te, flags);
1181                         /* Sample slot is not yet written or other record.
1182                          *
1183                          * This condition can occur if the buffer was reused
1184                          * from a combined basic- and diagnostic-sampling.
1185                          * If only basic-sampling is then active, entries are
1186                          * written into the larger diagnostic entries.
1187                          * This is typically the case for sample-data-blocks
1188                          * that are not full.  Stop processing if the first
1189                          * invalid format was detected.
1190                          */
1191                         if (!te->f)
1192                                 break;
1193                 }
1194
1195                 /* Reset sample slot and advance to next sample */
1196                 reset_sample_slot(sample, flags);
1197                 sample += sample_size;
1198         }
1199 }
1200
1201 /* hw_perf_event_update() - Process sampling buffer
1202  * @event:      The perf event
1203  * @flush_all:  Flag to also flush partially filled sample-data-blocks
1204  *
1205  * Processes the sampling buffer and create perf event samples.
1206  * The sampling buffer position are retrieved and saved in the TEAR_REG
1207  * register of the specified perf event.
1208  *
1209  * Only full sample-data-blocks are processed.  Specify the flash_all flag
1210  * to also walk through partially filled sample-data-blocks.  It is ignored
1211  * if PERF_CPUM_SF_FULL_BLOCKS is set.  The PERF_CPUM_SF_FULL_BLOCKS flag
1212  * enforces the processing of full sample-data-blocks only (trailer entries
1213  * with the block-full-indicator bit set).
1214  */
1215 static void hw_perf_event_update(struct perf_event *event, int flush_all)
1216 {
1217         struct hw_perf_event *hwc = &event->hw;
1218         struct hws_trailer_entry *te;
1219         unsigned long *sdbt;
1220         unsigned long long event_overflow, sampl_overflow, num_sdb, te_flags;
1221         int done;
1222
1223         if (flush_all && SDB_FULL_BLOCKS(hwc))
1224                 flush_all = 0;
1225
1226         sdbt = (unsigned long *) TEAR_REG(hwc);
1227         done = event_overflow = sampl_overflow = num_sdb = 0;
1228         while (!done) {
1229                 /* Get the trailer entry of the sample-data-block */
1230                 te = (struct hws_trailer_entry *) trailer_entry_ptr(*sdbt);
1231
1232                 /* Leave loop if no more work to do (block full indicator) */
1233                 if (!te->f) {
1234                         done = 1;
1235                         if (!flush_all)
1236                                 break;
1237                 }
1238
1239                 /* Check the sample overflow count */
1240                 if (te->overflow)
1241                         /* Account sample overflows and, if a particular limit
1242                          * is reached, extend the sampling buffer.
1243                          * For details, see sfb_account_overflows().
1244                          */
1245                         sampl_overflow += te->overflow;
1246
1247                 /* Timestamps are valid for full sample-data-blocks only */
1248                 debug_sprintf_event(sfdbg, 6, "hw_perf_event_update: sdbt=%p "
1249                                     "overflow=%llu timestamp=0x%llx\n",
1250                                     sdbt, te->overflow,
1251                                     (te->f) ? trailer_timestamp(te) : 0ULL);
1252
1253                 /* Collect all samples from a single sample-data-block and
1254                  * flag if an (perf) event overflow happened.  If so, the PMU
1255                  * is stopped and remaining samples will be discarded.
1256                  */
1257                 hw_collect_samples(event, sdbt, &event_overflow);
1258                 num_sdb++;
1259
1260                 /* Reset trailer (using compare-double-and-swap) */
1261                 do {
1262                         te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK;
1263                         te_flags |= SDB_TE_ALERT_REQ_MASK;
1264                 } while (!cmpxchg_double(&te->flags, &te->overflow,
1265                                          te->flags, te->overflow,
1266                                          te_flags, 0ULL));
1267
1268                 /* Advance to next sample-data-block */
1269                 sdbt++;
1270                 if (is_link_entry(sdbt))
1271                         sdbt = get_next_sdbt(sdbt);
1272
1273                 /* Update event hardware registers */
1274                 TEAR_REG(hwc) = (unsigned long) sdbt;
1275
1276                 /* Stop processing sample-data if all samples of the current
1277                  * sample-data-block were flushed even if it was not full.
1278                  */
1279                 if (flush_all && done)
1280                         break;
1281
1282                 /* If an event overflow happened, discard samples by
1283                  * processing any remaining sample-data-blocks.
1284                  */
1285                 if (event_overflow)
1286                         flush_all = 1;
1287         }
1288
1289         /* Account sample overflows in the event hardware structure */
1290         if (sampl_overflow)
1291                 OVERFLOW_REG(hwc) = DIV_ROUND_UP(OVERFLOW_REG(hwc) +
1292                                                  sampl_overflow, 1 + num_sdb);
1293         if (sampl_overflow || event_overflow)
1294                 debug_sprintf_event(sfdbg, 4, "hw_perf_event_update: "
1295                                     "overflow stats: sample=%llu event=%llu\n",
1296                                     sampl_overflow, event_overflow);
1297 }
1298
1299 static void cpumsf_pmu_read(struct perf_event *event)
1300 {
1301         /* Nothing to do ... updates are interrupt-driven */
1302 }
1303
1304 /* Activate sampling control.
1305  * Next call of pmu_enable() starts sampling.
1306  */
1307 static void cpumsf_pmu_start(struct perf_event *event, int flags)
1308 {
1309         struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf);
1310
1311         if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
1312                 return;
1313
1314         if (flags & PERF_EF_RELOAD)
1315                 WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
1316
1317         perf_pmu_disable(event->pmu);
1318         event->hw.state = 0;
1319         cpuhw->lsctl.cs = 1;
1320         if (SAMPL_DIAG_MODE(&event->hw))
1321                 cpuhw->lsctl.cd = 1;
1322         perf_pmu_enable(event->pmu);
1323 }
1324
1325 /* Deactivate sampling control.
1326  * Next call of pmu_enable() stops sampling.
1327  */
1328 static void cpumsf_pmu_stop(struct perf_event *event, int flags)
1329 {
1330         struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf);
1331
1332         if (event->hw.state & PERF_HES_STOPPED)
1333                 return;
1334
1335         perf_pmu_disable(event->pmu);
1336         cpuhw->lsctl.cs = 0;
1337         cpuhw->lsctl.cd = 0;
1338         event->hw.state |= PERF_HES_STOPPED;
1339
1340         if ((flags & PERF_EF_UPDATE) && !(event->hw.state & PERF_HES_UPTODATE)) {
1341                 hw_perf_event_update(event, 1);
1342                 event->hw.state |= PERF_HES_UPTODATE;
1343         }
1344         perf_pmu_enable(event->pmu);
1345 }
1346
1347 static int cpumsf_pmu_add(struct perf_event *event, int flags)
1348 {
1349         struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf);
1350         int err;
1351
1352         if (cpuhw->flags & PMU_F_IN_USE)
1353                 return -EAGAIN;
1354
1355         if (!cpuhw->sfb.sdbt)
1356                 return -EINVAL;
1357
1358         err = 0;
1359         perf_pmu_disable(event->pmu);
1360
1361         event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
1362
1363         /* Set up sampling controls.  Always program the sampling register
1364          * using the SDB-table start.  Reset TEAR_REG event hardware register
1365          * that is used by hw_perf_event_update() to store the sampling buffer
1366          * position after samples have been flushed.
1367          */
1368         cpuhw->lsctl.s = 0;
1369         cpuhw->lsctl.h = 1;
1370         cpuhw->lsctl.tear = (unsigned long) cpuhw->sfb.sdbt;
1371         cpuhw->lsctl.dear = *(unsigned long *) cpuhw->sfb.sdbt;
1372         cpuhw->lsctl.interval = SAMPL_RATE(&event->hw);
1373         hw_reset_registers(&event->hw, cpuhw->sfb.sdbt);
1374
1375         /* Ensure sampling functions are in the disabled state.  If disabled,
1376          * switch on sampling enable control. */
1377         if (WARN_ON_ONCE(cpuhw->lsctl.es == 1 || cpuhw->lsctl.ed == 1)) {
1378                 err = -EAGAIN;
1379                 goto out;
1380         }
1381         cpuhw->lsctl.es = 1;
1382         if (SAMPL_DIAG_MODE(&event->hw))
1383                 cpuhw->lsctl.ed = 1;
1384
1385         /* Set in_use flag and store event */
1386         cpuhw->event = event;
1387         cpuhw->flags |= PMU_F_IN_USE;
1388
1389         if (flags & PERF_EF_START)
1390                 cpumsf_pmu_start(event, PERF_EF_RELOAD);
1391 out:
1392         perf_event_update_userpage(event);
1393         perf_pmu_enable(event->pmu);
1394         return err;
1395 }
1396
1397 static void cpumsf_pmu_del(struct perf_event *event, int flags)
1398 {
1399         struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf);
1400
1401         perf_pmu_disable(event->pmu);
1402         cpumsf_pmu_stop(event, PERF_EF_UPDATE);
1403
1404         cpuhw->lsctl.es = 0;
1405         cpuhw->lsctl.ed = 0;
1406         cpuhw->flags &= ~PMU_F_IN_USE;
1407         cpuhw->event = NULL;
1408
1409         perf_event_update_userpage(event);
1410         perf_pmu_enable(event->pmu);
1411 }
1412
1413 CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC, PERF_EVENT_CPUM_SF);
1414 CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC_DIAG, PERF_EVENT_CPUM_SF_DIAG);
1415
1416 static struct attribute *cpumsf_pmu_events_attr[] = {
1417         CPUMF_EVENT_PTR(SF, SF_CYCLES_BASIC),
1418         NULL,
1419         NULL,
1420 };
1421
1422 PMU_FORMAT_ATTR(event, "config:0-63");
1423
1424 static struct attribute *cpumsf_pmu_format_attr[] = {
1425         &format_attr_event.attr,
1426         NULL,
1427 };
1428
1429 static struct attribute_group cpumsf_pmu_events_group = {
1430         .name = "events",
1431         .attrs = cpumsf_pmu_events_attr,
1432 };
1433 static struct attribute_group cpumsf_pmu_format_group = {
1434         .name = "format",
1435         .attrs = cpumsf_pmu_format_attr,
1436 };
1437 static const struct attribute_group *cpumsf_pmu_attr_groups[] = {
1438         &cpumsf_pmu_events_group,
1439         &cpumsf_pmu_format_group,
1440         NULL,
1441 };
1442
1443 static struct pmu cpumf_sampling = {
1444         .pmu_enable   = cpumsf_pmu_enable,
1445         .pmu_disable  = cpumsf_pmu_disable,
1446
1447         .event_init   = cpumsf_pmu_event_init,
1448         .add          = cpumsf_pmu_add,
1449         .del          = cpumsf_pmu_del,
1450
1451         .start        = cpumsf_pmu_start,
1452         .stop         = cpumsf_pmu_stop,
1453         .read         = cpumsf_pmu_read,
1454
1455         .attr_groups  = cpumsf_pmu_attr_groups,
1456 };
1457
1458 static void cpumf_measurement_alert(struct ext_code ext_code,
1459                                     unsigned int alert, unsigned long unused)
1460 {
1461         struct cpu_hw_sf *cpuhw;
1462
1463         if (!(alert & CPU_MF_INT_SF_MASK))
1464                 return;
1465         inc_irq_stat(IRQEXT_CMS);
1466         cpuhw = this_cpu_ptr(&cpu_hw_sf);
1467
1468         /* Measurement alerts are shared and might happen when the PMU
1469          * is not reserved.  Ignore these alerts in this case. */
1470         if (!(cpuhw->flags & PMU_F_RESERVED))
1471                 return;
1472
1473         /* The processing below must take care of multiple alert events that
1474          * might be indicated concurrently. */
1475
1476         /* Program alert request */
1477         if (alert & CPU_MF_INT_SF_PRA) {
1478                 if (cpuhw->flags & PMU_F_IN_USE)
1479                         hw_perf_event_update(cpuhw->event, 0);
1480                 else
1481                         WARN_ON_ONCE(!(cpuhw->flags & PMU_F_IN_USE));
1482         }
1483
1484         /* Report measurement alerts only for non-PRA codes */
1485         if (alert != CPU_MF_INT_SF_PRA)
1486                 debug_sprintf_event(sfdbg, 6, "measurement alert: 0x%x\n", alert);
1487
1488         /* Sampling authorization change request */
1489         if (alert & CPU_MF_INT_SF_SACA)
1490                 qsi(&cpuhw->qsi);
1491
1492         /* Loss of sample data due to high-priority machine activities */
1493         if (alert & CPU_MF_INT_SF_LSDA) {
1494                 pr_err("Sample data was lost\n");
1495                 cpuhw->flags |= PMU_F_ERR_LSDA;
1496                 sf_disable();
1497         }
1498
1499         /* Invalid sampling buffer entry */
1500         if (alert & (CPU_MF_INT_SF_IAE|CPU_MF_INT_SF_ISE)) {
1501                 pr_err("A sampling buffer entry is incorrect (alert=0x%x)\n",
1502                        alert);
1503                 cpuhw->flags |= PMU_F_ERR_IBE;
1504                 sf_disable();
1505         }
1506 }
1507
1508 static int cpumf_pmu_notifier(struct notifier_block *self,
1509                               unsigned long action, void *hcpu)
1510 {
1511         int flags;
1512
1513         /* Ignore the notification if no events are scheduled on the PMU.
1514          * This might be racy...
1515          */
1516         if (!atomic_read(&num_events))
1517                 return NOTIFY_OK;
1518
1519         switch (action & ~CPU_TASKS_FROZEN) {
1520         case CPU_ONLINE:
1521         case CPU_DOWN_FAILED:
1522                 flags = PMC_INIT;
1523                 local_irq_disable();
1524                 setup_pmc_cpu(&flags);
1525                 local_irq_enable();
1526                 break;
1527         case CPU_DOWN_PREPARE:
1528                 flags = PMC_RELEASE;
1529                 local_irq_disable();
1530                 setup_pmc_cpu(&flags);
1531                 local_irq_enable();
1532                 break;
1533         default:
1534                 break;
1535         }
1536
1537         return NOTIFY_OK;
1538 }
1539
1540 static int param_get_sfb_size(char *buffer, const struct kernel_param *kp)
1541 {
1542         if (!cpum_sf_avail())
1543                 return -ENODEV;
1544         return sprintf(buffer, "%lu,%lu", CPUM_SF_MIN_SDB, CPUM_SF_MAX_SDB);
1545 }
1546
1547 static int param_set_sfb_size(const char *val, const struct kernel_param *kp)
1548 {
1549         int rc;
1550         unsigned long min, max;
1551
1552         if (!cpum_sf_avail())
1553                 return -ENODEV;
1554         if (!val || !strlen(val))
1555                 return -EINVAL;
1556
1557         /* Valid parameter values: "min,max" or "max" */
1558         min = CPUM_SF_MIN_SDB;
1559         max = CPUM_SF_MAX_SDB;
1560         if (strchr(val, ','))
1561                 rc = (sscanf(val, "%lu,%lu", &min, &max) == 2) ? 0 : -EINVAL;
1562         else
1563                 rc = kstrtoul(val, 10, &max);
1564
1565         if (min < 2 || min >= max || max > get_num_physpages())
1566                 rc = -EINVAL;
1567         if (rc)
1568                 return rc;
1569
1570         sfb_set_limits(min, max);
1571         pr_info("The sampling buffer limits have changed to: "
1572                 "min=%lu max=%lu (diag=x%lu)\n",
1573                 CPUM_SF_MIN_SDB, CPUM_SF_MAX_SDB, CPUM_SF_SDB_DIAG_FACTOR);
1574         return 0;
1575 }
1576
1577 #define param_check_sfb_size(name, p) __param_check(name, p, void)
1578 static const struct kernel_param_ops param_ops_sfb_size = {
1579         .set = param_set_sfb_size,
1580         .get = param_get_sfb_size,
1581 };
1582
1583 #define RS_INIT_FAILURE_QSI       0x0001
1584 #define RS_INIT_FAILURE_BSDES     0x0002
1585 #define RS_INIT_FAILURE_ALRT      0x0003
1586 #define RS_INIT_FAILURE_PERF      0x0004
1587 static void __init pr_cpumsf_err(unsigned int reason)
1588 {
1589         pr_err("Sampling facility support for perf is not available: "
1590                "reason=%04x\n", reason);
1591 }
1592
1593 static int __init init_cpum_sampling_pmu(void)
1594 {
1595         struct hws_qsi_info_block si;
1596         int err;
1597
1598         if (!cpum_sf_avail())
1599                 return -ENODEV;
1600
1601         memset(&si, 0, sizeof(si));
1602         if (qsi(&si)) {
1603                 pr_cpumsf_err(RS_INIT_FAILURE_QSI);
1604                 return -ENODEV;
1605         }
1606
1607         if (si.bsdes != sizeof(struct hws_basic_entry)) {
1608                 pr_cpumsf_err(RS_INIT_FAILURE_BSDES);
1609                 return -EINVAL;
1610         }
1611
1612         if (si.ad) {
1613                 sfb_set_limits(CPUM_SF_MIN_SDB, CPUM_SF_MAX_SDB);
1614                 cpumsf_pmu_events_attr[1] =
1615                         CPUMF_EVENT_PTR(SF, SF_CYCLES_BASIC_DIAG);
1616         }
1617
1618         sfdbg = debug_register(KMSG_COMPONENT, 2, 1, 80);
1619         if (!sfdbg)
1620                 pr_err("Registering for s390dbf failed\n");
1621         debug_register_view(sfdbg, &debug_sprintf_view);
1622
1623         err = register_external_irq(EXT_IRQ_MEASURE_ALERT,
1624                                     cpumf_measurement_alert);
1625         if (err) {
1626                 pr_cpumsf_err(RS_INIT_FAILURE_ALRT);
1627                 goto out;
1628         }
1629
1630         err = perf_pmu_register(&cpumf_sampling, "cpum_sf", PERF_TYPE_RAW);
1631         if (err) {
1632                 pr_cpumsf_err(RS_INIT_FAILURE_PERF);
1633                 unregister_external_irq(EXT_IRQ_MEASURE_ALERT,
1634                                         cpumf_measurement_alert);
1635                 goto out;
1636         }
1637         perf_cpu_notifier(cpumf_pmu_notifier);
1638 out:
1639         return err;
1640 }
1641 arch_initcall(init_cpum_sampling_pmu);
1642 core_param(cpum_sfb_size, CPUM_SF_MAX_SDB, sfb_size, 0640);