arch/ppc/platforms/mvme5100.c

   1 /*
   2  * Board setup routines for the Motorola MVME5100.
   3  *
   4  * Author: Matt Porter <mporter@mvista.com>
   5  *
   6  * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
   7  * the terms of the GNU General Public License version 2.  This program
   8  * is licensed "as is" without any warranty of any kind, whether express
   9  * or implied.
  10  */
  11
  12 #include <linux/stddef.h>
  13 #include <linux/kernel.h>
  14 #include <linux/init.h>
  15 #include <linux/errno.h>
  16 #include <linux/pci.h>
  17 #include <linux/initrd.h>
  18 #include <linux/console.h>
  19 #include <linux/delay.h>
  20 #include <linux/seq_file.h>
  21 #include <linux/kdev_t.h>
  22 #include <linux/root_dev.h>
  23
  24 #include <asm/system.h>
  25 #include <asm/pgtable.h>
  26 #include <asm/page.h>
  27 #include <asm/dma.h>
  28 #include <asm/io.h>
  29 #include <asm/machdep.h>
  30 #include <asm/open_pic.h>
  31 #include <asm/i8259.h>
  32 #include <asm/todc.h>
  33 #include <asm/pci-bridge.h>
  34 #include <asm/bootinfo.h>
  35 #include <asm/hawk.h>
  36
  37 #include <platforms/pplus.h>
  38 #include <platforms/mvme5100.h>
  39
  40 static u_char mvme5100_openpic_initsenses[16] __initdata = {
  41         (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* i8259 cascade */
  42         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* TL16C550 UART 1,2 */
  43         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Enet1 front panel or P2 */
  44         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Hawk Watchdog 1,2 */
  45         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* DS1621 thermal alarm */
  46         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT0# */
  47         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT1# */
  48         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT2# */
  49         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT3# */
  50         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTA#, PMC2 INTB# */
  51         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTB#, PMC2 INTC# */
  52         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTC#, PMC2 INTD# */
  53         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTD#, PMC2 INTA# */
  54         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Enet 2 (front panel) */
  55         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Abort Switch */
  56         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* RTC Alarm */
  57 };
  58
  59 static inline int
  60 mvme5100_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
  61 {
  62         int irq;
  63
  64         static char pci_irq_table[][4] =
  65         /*
  66          *      PCI IDSEL/INTPIN->INTLINE
  67          *         A   B   C   D
  68          */
  69         {
  70                 {  0,  0,  0,  0 },     /* IDSEL 11 - Winbond */
  71                 {  0,  0,  0,  0 },     /* IDSEL 12 - unused */
  72                 { 21, 22, 23, 24 },     /* IDSEL 13 - Universe II */
  73                 { 18,  0,  0,  0 },     /* IDSEL 14 - Enet 1 */
  74                 {  0,  0,  0,  0 },     /* IDSEL 15 - unused */
  75                 { 25, 26, 27, 28 },     /* IDSEL 16 - PMC Slot 1 */
  76                 { 28, 25, 26, 27 },     /* IDSEL 17 - PMC Slot 2 */
  77                 {  0,  0,  0,  0 },     /* IDSEL 18 - unused */
  78                 { 29,  0,  0,  0 },     /* IDSEL 19 - Enet 2 */
  79                 {  0,  0,  0,  0 },     /* IDSEL 20 - PMCSPAN */
  80         };
  81
  82         const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4;
  83         irq = PCI_IRQ_TABLE_LOOKUP;
  84         /* If lookup is zero, always return 0 */
  85         if (!irq)
  86                 return 0;
  87         else
  88 #ifdef CONFIG_MVME5100_IPMC761_PRESENT
  89         /* If IPMC761 present, return table value */
  90         return irq;
  91 #else
  92         /* If IPMC761 not present, we don't have an i8259 so adjust */
  93         return (irq - NUM_8259_INTERRUPTS);
  94 #endif
  95 }
  96
  97 static void
  98 mvme5100_pcibios_fixup_resources(struct pci_dev *dev)
  99 {
 100         int i;
 101
 102         if ((dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
 103                         (dev->device == PCI_DEVICE_ID_MOTOROLA_HAWK))
 104                 for (i=0; i<DEVICE_COUNT_RESOURCE; i++)
 105                 {
 106                         dev->resource[i].start = 0;
 107                         dev->resource[i].end = 0;
 108                 }
 109 }
 110
 111 static void __init
 112 mvme5100_setup_bridge(void)
 113 {
 114         struct pci_controller*  hose;
 115
 116         hose = pcibios_alloc_controller();
 117
 118         if (!hose)
 119                 return;
 120
 121         hose->first_busno = 0;
 122         hose->last_busno = 0xff;
 123         hose->pci_mem_offset = MVME5100_PCI_MEM_OFFSET;
 124
 125         pci_init_resource(&hose->io_resource, MVME5100_PCI_LOWER_IO,
 126                         MVME5100_PCI_UPPER_IO, IORESOURCE_IO,
 127                         "PCI host bridge");
 128
 129         pci_init_resource(&hose->mem_resources[0], MVME5100_PCI_LOWER_MEM,
 130                         MVME5100_PCI_UPPER_MEM, IORESOURCE_MEM,
 131                         "PCI host bridge");
 132
 133         hose->io_space.start = MVME5100_PCI_LOWER_IO;
 134         hose->io_space.end = MVME5100_PCI_UPPER_IO;
 135         hose->mem_space.start = MVME5100_PCI_LOWER_MEM;
 136         hose->mem_space.end = MVME5100_PCI_UPPER_MEM;
 137         hose->io_base_virt = (void *)MVME5100_ISA_IO_BASE;
 138
 139         /* Use indirect method of Hawk */
 140         setup_indirect_pci(hose, MVME5100_PCI_CONFIG_ADDR,
 141                         MVME5100_PCI_CONFIG_DATA);
 142
 143         hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
 144
 145         ppc_md.pcibios_fixup_resources = mvme5100_pcibios_fixup_resources;
 146         ppc_md.pci_swizzle = common_swizzle;
 147         ppc_md.pci_map_irq = mvme5100_map_irq;
 148 }
 149
 150 static void __init
 151 mvme5100_setup_arch(void)
 152 {
 153         if ( ppc_md.progress )
 154                 ppc_md.progress("mvme5100_setup_arch: enter", 0);
 155
 156         loops_per_jiffy = 50000000 / HZ;
 157
 158 #ifdef CONFIG_BLK_DEV_INITRD
 159         if (initrd_start)
 160                 ROOT_DEV = Root_RAM0;
 161         else
 162 #endif
 163 #ifdef  CONFIG_ROOT_NFS
 164                 ROOT_DEV = Root_NFS;
 165 #else
 166                 ROOT_DEV = Root_SDA2;
 167 #endif
 168
 169         if ( ppc_md.progress )
 170                 ppc_md.progress("mvme5100_setup_arch: find_bridges", 0);
 171
 172         /* Setup PCI host bridge */
 173         mvme5100_setup_bridge();
 174
 175         /* Find and map our OpenPIC */
 176         hawk_mpic_init(MVME5100_PCI_MEM_OFFSET);
 177         OpenPIC_InitSenses = mvme5100_openpic_initsenses;
 178         OpenPIC_NumInitSenses = sizeof(mvme5100_openpic_initsenses);
 179
 180         printk("MVME5100 port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n");
 181
 182         if ( ppc_md.progress )
 183                 ppc_md.progress("mvme5100_setup_arch: exit", 0);
 184
 185         return;
 186 }
 187
 188 static void __init
 189 mvme5100_init2(void)
 190 {
 191 #ifdef CONFIG_MVME5100_IPMC761_PRESENT
 192                 request_region(0x00,0x20,"dma1");
 193                 request_region(0x20,0x20,"pic1");
 194                 request_region(0x40,0x20,"timer");
 195                 request_region(0x80,0x10,"dma page reg");
 196                 request_region(0xa0,0x20,"pic2");
 197                 request_region(0xc0,0x20,"dma2");
 198 #endif
 199         return;
 200 }
 201
 202 /*
 203  * Interrupt setup and service.
 204  * Have MPIC on HAWK and cascaded 8259s on Winbond cascaded to MPIC.
 205  */
 206 static void __init
 207 mvme5100_init_IRQ(void)
 208 {
 209 #ifdef CONFIG_MVME5100_IPMC761_PRESENT
 210         int i;
 211 #endif
 212
 213         if ( ppc_md.progress )
 214                 ppc_md.progress("init_irq: enter", 0);
 215
 216         openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
 217 #ifdef CONFIG_MVME5100_IPMC761_PRESENT
 218         openpic_init(NUM_8259_INTERRUPTS);
 219         openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
 220                         &i8259_irq);
 221
 222         i8259_init(0, 0);
 223 #else
 224         openpic_init(0);
 225 #endif
 226
 227         if ( ppc_md.progress )
 228                 ppc_md.progress("init_irq: exit", 0);
 229
 230         return;
 231 }
 232
 233 /*
 234  * Set BAT 3 to map 0xf0000000 to end of physical memory space.
 235  */
 236 static __inline__ void
 237 mvme5100_set_bat(void)
 238 {
 239         mb();
 240         mtspr(SPRN_DBAT1U, 0xf0001ffe);
 241         mtspr(SPRN_DBAT1L, 0xf000002a);
 242         mb();
 243 }
 244
 245 static unsigned long __init
 246 mvme5100_find_end_of_memory(void)
 247 {
 248         return hawk_get_mem_size(MVME5100_HAWK_SMC_BASE);
 249 }
 250
 251 static void __init
 252 mvme5100_map_io(void)
 253 {
 254         io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
 255         ioremap_base = 0xfe000000;
 256 }
 257
 258 static void
 259 mvme5100_reset_board(void)
 260 {
 261         local_irq_disable();
 262
 263         /* Set exception prefix high - to the firmware */
 264         _nmask_and_or_msr(0, MSR_IP);
 265
 266         out_8((u_char *)MVME5100_BOARD_MODRST_REG, 0x01);
 267
 268         return;
 269 }
 270
 271 static void
 272 mvme5100_restart(char *cmd)
 273 {
 274         volatile ulong i = 10000000;
 275
 276         mvme5100_reset_board();
 277
 278         while (i-- > 0);
 279         panic("restart failed\n");
 280 }
 281
 282 static void
 283 mvme5100_halt(void)
 284 {
 285         local_irq_disable();
 286         while (1);
 287 }
 288
 289 static void
 290 mvme5100_power_off(void)
 291 {
 292         mvme5100_halt();
 293 }
 294
 295 static int
 296 mvme5100_show_cpuinfo(struct seq_file *m)
 297 {
 298         seq_printf(m, "vendor\t\t: Motorola\n");
 299         seq_printf(m, "machine\t\t: MVME5100\n");
 300
 301         return 0;
 302 }
 303
 304 TODC_ALLOC();
 305
 306 void __init
 307 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 308               unsigned long r6, unsigned long r7)
 309 {
 310         parse_bootinfo(find_bootinfo());
 311         mvme5100_set_bat();
 312
 313         isa_io_base = MVME5100_ISA_IO_BASE;
 314         isa_mem_base = MVME5100_ISA_MEM_BASE;
 315         pci_dram_offset = MVME5100_PCI_DRAM_OFFSET;
 316
 317         ppc_md.setup_arch = mvme5100_setup_arch;
 318         ppc_md.show_cpuinfo = mvme5100_show_cpuinfo;
 319         ppc_md.init_IRQ = mvme5100_init_IRQ;
 320         ppc_md.get_irq = openpic_get_irq;
 321         ppc_md.init = mvme5100_init2;
 322
 323         ppc_md.restart = mvme5100_restart;
 324         ppc_md.power_off = mvme5100_power_off;
 325         ppc_md.halt = mvme5100_halt;
 326
 327         ppc_md.find_end_of_memory = mvme5100_find_end_of_memory;
 328         ppc_md.setup_io_mappings = mvme5100_map_io;
 329
 330         TODC_INIT(TODC_TYPE_MK48T37, MVME5100_NVRAM_AS0, MVME5100_NVRAM_AS1,
 331                         MVME5100_NVRAM_DATA, 8);
 332
 333         ppc_md.time_init = todc_time_init;
 334         ppc_md.set_rtc_time = todc_set_rtc_time;
 335         ppc_md.get_rtc_time = todc_get_rtc_time;
 336         ppc_md.calibrate_decr = todc_calibrate_decr;
 337
 338         ppc_md.nvram_read_val = todc_m48txx_read_val;
 339         ppc_md.nvram_write_val = todc_m48txx_write_val;
 340 }