Pull bugzilla-9345 into release branch
[sfrench/cifs-2.6.git] / arch / powerpc / platforms / 83xx / mpc834x_mds.c
1 /*
2  * arch/powerpc/platforms/83xx/mpc834x_mds.c
3  *
4  * MPC834x MDS board specific routines
5  *
6  * Maintainer: Kumar Gala <galak@kernel.crashing.org>
7  *
8  * This program is free software; you can redistribute  it and/or modify it
9  * under  the terms of  the GNU General  Public License as published by the
10  * Free Software Foundation;  either version 2 of the  License, or (at your
11  * option) any later version.
12  */
13
14 #include <linux/stddef.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/errno.h>
18 #include <linux/reboot.h>
19 #include <linux/pci.h>
20 #include <linux/kdev_t.h>
21 #include <linux/major.h>
22 #include <linux/console.h>
23 #include <linux/delay.h>
24 #include <linux/seq_file.h>
25 #include <linux/root_dev.h>
26
27 #include <asm/system.h>
28 #include <asm/atomic.h>
29 #include <asm/time.h>
30 #include <asm/io.h>
31 #include <asm/machdep.h>
32 #include <asm/ipic.h>
33 #include <asm/irq.h>
34 #include <asm/prom.h>
35 #include <asm/udbg.h>
36 #include <sysdev/fsl_soc.h>
37
38 #include "mpc83xx.h"
39
40 #define BCSR5_INT_USB           0x02
41 static int mpc834xemds_usb_cfg(void)
42 {
43         struct device_node *np;
44         void __iomem *bcsr_regs = NULL;
45         u8 bcsr5;
46
47         mpc834x_usb_cfg();
48         /* Map BCSR area */
49         np = of_find_node_by_name(NULL, "bcsr");
50         if (np) {
51                 struct resource res;
52
53                 of_address_to_resource(np, 0, &res);
54                 bcsr_regs = ioremap(res.start, res.end - res.start + 1);
55                 of_node_put(np);
56         }
57         if (!bcsr_regs)
58                 return -1;
59
60         /*
61          * if Processor Board is plugged into PIB board,
62          * force to use the PHY on Processor Board
63          */
64         bcsr5 = in_8(bcsr_regs + 5);
65         if (!(bcsr5 & BCSR5_INT_USB))
66                 out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB));
67         iounmap(bcsr_regs);
68         return 0;
69 }
70
71 /* ************************************************************************
72  *
73  * Setup the architecture
74  *
75  */
76 static void __init mpc834x_mds_setup_arch(void)
77 {
78 #ifdef CONFIG_PCI
79         struct device_node *np;
80 #endif
81
82         if (ppc_md.progress)
83                 ppc_md.progress("mpc834x_mds_setup_arch()", 0);
84
85 #ifdef CONFIG_PCI
86         for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
87                 mpc83xx_add_bridge(np);
88 #endif
89
90         mpc834xemds_usb_cfg();
91 }
92
93 static void __init mpc834x_mds_init_IRQ(void)
94 {
95         struct device_node *np;
96
97         np = of_find_node_by_type(NULL, "ipic");
98         if (!np)
99                 return;
100
101         ipic_init(np, 0);
102
103         /* Initialize the default interrupt mapping priorities,
104          * in case the boot rom changed something on us.
105          */
106         ipic_set_default_priority();
107 }
108
109 /*
110  * Called very early, MMU is off, device-tree isn't unflattened
111  */
112 static int __init mpc834x_mds_probe(void)
113 {
114         unsigned long root = of_get_flat_dt_root();
115
116         return of_flat_dt_is_compatible(root, "MPC834xMDS");
117 }
118
119 define_machine(mpc834x_mds) {
120         .name                   = "MPC834x MDS",
121         .probe                  = mpc834x_mds_probe,
122         .setup_arch             = mpc834x_mds_setup_arch,
123         .init_IRQ               = mpc834x_mds_init_IRQ,
124         .get_irq                = ipic_get_irq,
125         .restart                = mpc83xx_restart,
126         .time_init              = mpc83xx_time_init,
127         .calibrate_decr         = generic_calibrate_decr,
128         .progress               = udbg_progress,
129 };