powerpc: Fix DEBUG_HIGHMEM build break from d4515646699
[sfrench/cifs-2.6.git] / arch / powerpc / include / asm / tsi108.h
1 /*
2  * common routine and memory layout for Tundra TSI108(Grendel) host bridge
3  * memory controller.
4  *
5  * Author: Jacob Pan (jacob.pan@freescale.com)
6  *         Alex Bounine (alexandreb@tundra.com)
7  *
8  * Copyright 2004-2006 Freescale Semiconductor, Inc.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License
12  * as published by the Free Software Foundation; either version
13  * 2 of the License, or (at your option) any later version.
14  */
15
16 #ifndef __PPC_KERNEL_TSI108_H
17 #define __PPC_KERNEL_TSI108_H
18
19 #include <asm/pci-bridge.h>
20
21 /* Size of entire register space */
22 #define TSI108_REG_SIZE         (0x10000)
23
24 /* Sizes of register spaces for individual blocks */
25 #define TSI108_HLP_SIZE         0x1000
26 #define TSI108_PCI_SIZE         0x1000
27 #define TSI108_CLK_SIZE         0x1000
28 #define TSI108_PB_SIZE          0x1000
29 #define TSI108_SD_SIZE          0x1000
30 #define TSI108_DMA_SIZE         0x1000
31 #define TSI108_ETH_SIZE         0x1000
32 #define TSI108_I2C_SIZE         0x400
33 #define TSI108_MPIC_SIZE        0x400
34 #define TSI108_UART0_SIZE       0x200
35 #define TSI108_GPIO_SIZE        0x200
36 #define TSI108_UART1_SIZE       0x200
37
38 /* Offsets within Tsi108(A) CSR space for individual blocks */
39 #define TSI108_HLP_OFFSET       0x0000
40 #define TSI108_PCI_OFFSET       0x1000
41 #define TSI108_CLK_OFFSET       0x2000
42 #define TSI108_PB_OFFSET        0x3000
43 #define TSI108_SD_OFFSET        0x4000
44 #define TSI108_DMA_OFFSET       0x5000
45 #define TSI108_ETH_OFFSET       0x6000
46 #define TSI108_I2C_OFFSET       0x7000
47 #define TSI108_MPIC_OFFSET      0x7400
48 #define TSI108_UART0_OFFSET     0x7800
49 #define TSI108_GPIO_OFFSET      0x7A00
50 #define TSI108_UART1_OFFSET     0x7C00
51
52 /* Tsi108 registers used by common code components */
53 #define TSI108_PCI_CSR          (0x004)
54 #define TSI108_PCI_IRP_CFG_CTL  (0x180)
55 #define TSI108_PCI_IRP_STAT     (0x184)
56 #define TSI108_PCI_IRP_ENABLE   (0x188)
57 #define TSI108_PCI_IRP_INTAD    (0x18C)
58
59 #define TSI108_PCI_IRP_STAT_P_INT       (0x00400000)
60 #define TSI108_PCI_IRP_ENABLE_P_INT     (0x00400000)
61
62 #define TSI108_CG_PWRUP_STATUS  (0x234)
63
64 #define TSI108_PB_ISR           (0x00C)
65 #define TSI108_PB_ERRCS         (0x404)
66 #define TSI108_PB_AERR          (0x408)
67
68 #define TSI108_PB_ERRCS_ES              (1 << 1)
69 #define TSI108_PB_ISR_PBS_RD_ERR        (1 << 8)
70
71 #define TSI108_PCI_CFG_SIZE             (0x01000000)
72
73 /*
74  * PHY Configuration Options
75  *
76  * Specify "bcm54xx" in the compatible property of your device tree phy
77  * nodes if your board uses the Broadcom PHYs
78  */
79 #define TSI108_PHY_MV88E        0       /* Marvel 88Exxxx PHY */
80 #define TSI108_PHY_BCM54XX      1       /* Broardcom BCM54xx PHY */
81
82 /* Global variables */
83
84 extern u32 tsi108_pci_cfg_base;
85 /* Exported functions */
86
87 extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base);
88 extern unsigned long tsi108_get_mem_size(void);
89 extern unsigned long tsi108_get_cpu_clk(void);
90 extern unsigned long tsi108_get_sdc_clk(void);
91 extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn,
92                                       int offset, int len, u32 val);
93 extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn,
94                                      int offset, int len, u32 * val);
95 extern void tsi108_clear_pci_error(u32 pci_cfg_base);
96
97 extern phys_addr_t get_csrbase(void);
98
99 typedef struct {
100         u32 regs;               /* hw registers base address */
101         u32 phyregs;            /* phy registers base address */
102         u16 phy;                /* phy address */
103         u16 irq_num;            /* irq number */
104         u8 mac_addr[6];         /* phy mac address */
105         u16 phy_type;   /* type of phy on board */
106 } hw_info;
107
108 extern u32 get_vir_csrbase(void);
109 extern u32 tsi108_csr_vir_base;
110
111 static inline u32 tsi108_read_reg(u32 reg_offset)
112 {
113         return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset));
114 }
115
116 static inline void tsi108_write_reg(u32 reg_offset, u32 val)
117 {
118         out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val);
119 }
120
121 #endif                          /* __PPC_KERNEL_TSI108_H */