arch/powerpc/boot/dts/tqm8548.dts

   1 /*
   2  * TQM8548 Device Tree Source
   3  *
   4  * Copyright 2006 Freescale Semiconductor Inc.
   5  * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13 /dts-v1/;
  14
  15 / {
  16         model = "tqc,tqm8548";
  17         compatible = "tqc,tqm8548";
  18         #address-cells = <1>;
  19         #size-cells = <1>;
  20
  21         aliases {
  22                 ethernet0 = &enet0;
  23                 ethernet1 = &enet1;
  24                 ethernet2 = &enet2;
  25                 ethernet3 = &enet3;
  26
  27                 serial0 = &serial0;
  28                 serial1 = &serial1;
  29                 pci0 = &pci0;
  30                 pci1 = &pci1;
  31         };
  32
  33         cpus {
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36
  37                 PowerPC,8548@0 {
  38                         device_type = "cpu";
  39                         reg = <0>;
  40                         d-cache-line-size = <32>;       // 32 bytes
  41                         i-cache-line-size = <32>;       // 32 bytes
  42                         d-cache-size = <0x8000>;        // L1, 32K
  43                         i-cache-size = <0x8000>;        // L1, 32K
  44                         next-level-cache = <&L2>;
  45                 };
  46         };
  47
  48         memory {
  49                 device_type = "memory";
  50                 reg = <0x00000000 0x00000000>;  // Filled in by U-Boot
  51         };
  52
  53         soc@e0000000 {
  54                 #address-cells = <1>;
  55                 #size-cells = <1>;
  56                 device_type = "soc";
  57                 ranges = <0x0 0xe0000000 0x100000>;
  58                 reg = <0xe0000000 0x1000>;      // CCSRBAR
  59                 bus-frequency = <0>;
  60                 compatible = "fsl,mpc8548-immr", "simple-bus";
  61
  62                 memory-controller@2000 {
  63                         compatible = "fsl,mpc8548-memory-controller";
  64                         reg = <0x2000 0x1000>;
  65                         interrupt-parent = <&mpic>;
  66                         interrupts = <18 2>;
  67                 };
  68
  69                 L2: l2-cache-controller@20000 {
  70                         compatible = "fsl,mpc8548-l2-cache-controller";
  71                         reg = <0x20000 0x1000>;
  72                         cache-line-size = <32>; // 32 bytes
  73                         cache-size = <0x80000>; // L2, 512K
  74                         interrupt-parent = <&mpic>;
  75                         interrupts = <16 2>;
  76                 };
  77
  78                 i2c@3000 {
  79                         #address-cells = <1>;
  80                         #size-cells = <0>;
  81                         cell-index = <0>;
  82                         compatible = "fsl-i2c";
  83                         reg = <0x3000 0x100>;
  84                         interrupts = <43 2>;
  85                         interrupt-parent = <&mpic>;
  86                         dfsrr;
  87
  88                         dtt@50 {
  89                                 compatible = "national,lm75";
  90                                 reg = <0x50>;
  91                         };
  92
  93                         rtc@68 {
  94                                 compatible = "dallas,ds1337";
  95                                 reg = <0x68>;
  96                         };
  97                 };
  98
  99                 i2c@3100 {
 100                         #address-cells = <1>;
 101                         #size-cells = <0>;
 102                         cell-index = <1>;
 103                         compatible = "fsl-i2c";
 104                         reg = <0x3100 0x100>;
 105                         interrupts = <43 2>;
 106                         interrupt-parent = <&mpic>;
 107                         dfsrr;
 108                 };
 109
 110                 dma@21300 {
 111                         #address-cells = <1>;
 112                         #size-cells = <1>;
 113                         compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
 114                         reg = <0x21300 0x4>;
 115                         ranges = <0x0 0x21100 0x200>;
 116                         cell-index = <0>;
 117                         dma-channel@0 {
 118                                 compatible = "fsl,mpc8548-dma-channel",
 119                                                 "fsl,eloplus-dma-channel";
 120                                 reg = <0x0 0x80>;
 121                                 cell-index = <0>;
 122                                 interrupt-parent = <&mpic>;
 123                                 interrupts = <20 2>;
 124                         };
 125                         dma-channel@80 {
 126                                 compatible = "fsl,mpc8548-dma-channel",
 127                                                 "fsl,eloplus-dma-channel";
 128                                 reg = <0x80 0x80>;
 129                                 cell-index = <1>;
 130                                 interrupt-parent = <&mpic>;
 131                                 interrupts = <21 2>;
 132                         };
 133                         dma-channel@100 {
 134                                 compatible = "fsl,mpc8548-dma-channel",
 135                                                 "fsl,eloplus-dma-channel";
 136                                 reg = <0x100 0x80>;
 137                                 cell-index = <2>;
 138                                 interrupt-parent = <&mpic>;
 139                                 interrupts = <22 2>;
 140                         };
 141                         dma-channel@180 {
 142                                 compatible = "fsl,mpc8548-dma-channel",
 143                                                 "fsl,eloplus-dma-channel";
 144                                 reg = <0x180 0x80>;
 145                                 cell-index = <3>;
 146                                 interrupt-parent = <&mpic>;
 147                                 interrupts = <23 2>;
 148                         };
 149                 };
 150
 151                 enet0: ethernet@24000 {
 152                         #address-cells = <1>;
 153                         #size-cells = <1>;
 154                         cell-index = <0>;
 155                         device_type = "network";
 156                         model = "eTSEC";
 157                         compatible = "gianfar";
 158                         reg = <0x24000 0x1000>;
 159                         ranges = <0x0 0x24000 0x1000>;
 160                         local-mac-address = [ 00 00 00 00 00 00 ];
 161                         interrupts = <29 2 30 2 34 2>;
 162                         interrupt-parent = <&mpic>;
 163                         tbi-handle = <&tbi0>;
 164                         phy-handle = <&phy2>;
 165
 166                         mdio@520 {
 167                                 #address-cells = <1>;
 168                                 #size-cells = <0>;
 169                                 compatible = "fsl,gianfar-mdio";
 170                                 reg = <0x520 0x20>;
 171
 172                                 phy1: ethernet-phy@0 {
 173                                         interrupt-parent = <&mpic>;
 174                                         interrupts = <8 1>;
 175                                         reg = <1>;
 176                                         device_type = "ethernet-phy";
 177                                 };
 178                                 phy2: ethernet-phy@1 {
 179                                         interrupt-parent = <&mpic>;
 180                                         interrupts = <8 1>;
 181                                         reg = <2>;
 182                                         device_type = "ethernet-phy";
 183                                 };
 184                                 phy3: ethernet-phy@3 {
 185                                         interrupt-parent = <&mpic>;
 186                                         interrupts = <8 1>;
 187                                         reg = <3>;
 188                                         device_type = "ethernet-phy";
 189                                 };
 190                                 phy4: ethernet-phy@4 {
 191                                         interrupt-parent = <&mpic>;
 192                                         interrupts = <8 1>;
 193                                         reg = <4>;
 194                                         device_type = "ethernet-phy";
 195                                 };
 196                                 phy5: ethernet-phy@5 {
 197                                         interrupt-parent = <&mpic>;
 198                                         interrupts = <8 1>;
 199                                         reg = <5>;
 200                                         device_type = "ethernet-phy";
 201                                 };
 202                                 tbi0: tbi-phy@11 {
 203                                         reg = <0x11>;
 204                                         device_type = "tbi-phy";
 205                                 };
 206                         };
 207                 };
 208
 209                 enet1: ethernet@25000 {
 210                         #address-cells = <1>;
 211                         #size-cells = <1>;
 212                         cell-index = <1>;
 213                         device_type = "network";
 214                         model = "eTSEC";
 215                         compatible = "gianfar";
 216                         reg = <0x25000 0x1000>;
 217                         ranges = <0x0 0x25000 0x1000>;
 218                         local-mac-address = [ 00 00 00 00 00 00 ];
 219                         interrupts = <35 2 36 2 40 2>;
 220                         interrupt-parent = <&mpic>;
 221                         tbi-handle = <&tbi1>;
 222                         phy-handle = <&phy1>;
 223
 224                         mdio@520 {
 225                                 #address-cells = <1>;
 226                                 #size-cells = <0>;
 227                                 compatible = "fsl,gianfar-tbi";
 228                                 reg = <0x520 0x20>;
 229
 230                                 tbi1: tbi-phy@11 {
 231                                         reg = <0x11>;
 232                                         device_type = "tbi-phy";
 233                                 };
 234                         };
 235                 };
 236
 237                 enet2: ethernet@26000 {
 238                         #address-cells = <1>;
 239                         #size-cells = <1>;
 240                         cell-index = <2>;
 241                         device_type = "network";
 242                         model = "eTSEC";
 243                         compatible = "gianfar";
 244                         reg = <0x26000 0x1000>;
 245                         ranges = <0x0 0x26000 0x1000>;
 246                         local-mac-address = [ 00 00 00 00 00 00 ];
 247                         interrupts = <31 2 32 2 33 2>;
 248                         interrupt-parent = <&mpic>;
 249                         tbi-handle = <&tbi2>;
 250                         phy-handle = <&phy3>;
 251
 252                         mdio@520 {
 253                                 #address-cells = <1>;
 254                                 #size-cells = <0>;
 255                                 compatible = "fsl,gianfar-tbi";
 256                                 reg = <0x520 0x20>;
 257
 258                                 tbi2: tbi-phy@11 {
 259                                         reg = <0x11>;
 260                                         device_type = "tbi-phy";
 261                                 };
 262                         };
 263                 };
 264
 265                 enet3: ethernet@27000 {
 266                         #address-cells = <1>;
 267                         #size-cells = <1>;
 268                         cell-index = <3>;
 269                         device_type = "network";
 270                         model = "eTSEC";
 271                         compatible = "gianfar";
 272                         reg = <0x27000 0x1000>;
 273                         ranges = <0x0 0x27000 0x1000>;
 274                         local-mac-address = [ 00 00 00 00 00 00 ];
 275                         interrupts = <37 2 38 2 39 2>;
 276                         interrupt-parent = <&mpic>;
 277                         tbi-handle = <&tbi3>;
 278                         phy-handle = <&phy4>;
 279
 280                         mdio@520 {
 281                                 #address-cells = <1>;
 282                                 #size-cells = <0>;
 283                                 compatible = "fsl,gianfar-tbi";
 284                                 reg = <0x520 0x20>;
 285
 286                                 tbi3: tbi-phy@11 {
 287                                         reg = <0x11>;
 288                                         device_type = "tbi-phy";
 289                                 };
 290                         };
 291                 };
 292
 293                 serial0: serial@4500 {
 294                         cell-index = <0>;
 295                         device_type = "serial";
 296                         compatible = "ns16550";
 297                         reg = <0x4500 0x100>;   // reg base, size
 298                         clock-frequency = <0>;  // should we fill in in uboot?
 299                         current-speed = <115200>;
 300                         interrupts = <42 2>;
 301                         interrupt-parent = <&mpic>;
 302                 };
 303
 304                 serial1: serial@4600 {
 305                         cell-index = <1>;
 306                         device_type = "serial";
 307                         compatible = "ns16550";
 308                         reg = <0x4600 0x100>;   // reg base, size
 309                         clock-frequency = <0>;  // should we fill in in uboot?
 310                         current-speed = <115200>;
 311                         interrupts = <42 2>;
 312                         interrupt-parent = <&mpic>;
 313                 };
 314
 315                 global-utilities@e0000 {        // global utilities reg
 316                         compatible = "fsl,mpc8548-guts";
 317                         reg = <0xe0000 0x1000>;
 318                         fsl,has-rstcr;
 319                 };
 320
 321                 mpic: pic@40000 {
 322                         interrupt-controller;
 323                         #address-cells = <0>;
 324                         #interrupt-cells = <2>;
 325                         reg = <0x40000 0x40000>;
 326                         compatible = "chrp,open-pic";
 327                         device_type = "open-pic";
 328                 };
 329         };
 330
 331         localbus@e0005000 {
 332                 compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
 333                              "simple-bus";
 334                 #address-cells = <2>;
 335                 #size-cells = <1>;
 336                 reg = <0xe0005000 0x100>;       // BRx, ORx, etc.
 337
 338                 ranges = <
 339                         0 0x0 0xfc000000 0x04000000     // NOR FLASH bank 1
 340                         1 0x0 0xf8000000 0x08000000     // NOR FLASH bank 0
 341                         2 0x0 0xe3000000 0x00008000     // CAN (2 x i82527)
 342                         3 0x0 0xe3010000 0x00008000     // NAND FLASH
 343
 344                 >;
 345
 346                 flash@1,0 {
 347                         #address-cells = <1>;
 348                         #size-cells = <1>;
 349                         compatible = "cfi-flash";
 350                         reg = <1 0x0 0x8000000>;
 351                         bank-width = <4>;
 352                         device-width = <1>;
 353
 354                         partition@0 {
 355                                 label = "kernel";
 356                                 reg = <0x00000000 0x00200000>;
 357                         };
 358                         partition@200000 {
 359                                 label = "root";
 360                                 reg = <0x00200000 0x00300000>;
 361                         };
 362                         partition@500000 {
 363                                 label = "user";
 364                                 reg = <0x00500000 0x07a00000>;
 365                         };
 366                         partition@7f00000 {
 367                                 label = "env1";
 368                                 reg = <0x07f00000 0x00040000>;
 369                         };
 370                         partition@7f40000 {
 371                                 label = "env2";
 372                                 reg = <0x07f40000 0x00040000>;
 373                         };
 374                         partition@7f80000 {
 375                                 label = "u-boot";
 376                                 reg = <0x07f80000 0x00080000>;
 377                                 read-only;
 378                         };
 379                 };
 380
 381                 /* Note: CAN support needs be enabled in U-Boot */
 382                 can0@2,0 {
 383                         compatible = "intel,82527"; // Bosch CC770
 384                         reg = <2 0x0 0x100>;
 385                         interrupts = <4 1>;
 386                         interrupt-parent = <&mpic>;
 387                 };
 388
 389                 can1@2,100 {
 390                         compatible = "intel,82527"; // Bosch CC770
 391                         reg = <2 0x100 0x100>;
 392                         interrupts = <4 1>;
 393                         interrupt-parent = <&mpic>;
 394                 };
 395
 396                 /* Note: NAND support needs to be enabled in U-Boot */
 397                 upm@3,0 {
 398                         #address-cells = <0>;
 399                         #size-cells = <0>;
 400                         compatible = "fsl,upm-nand";
 401                         reg = <3 0x0 0x800>;
 402                         fsl,upm-addr-offset = <0x10>;
 403                         fsl,upm-cmd-offset = <0x08>;
 404                         chip-delay = <25>; // in micro-seconds
 405
 406                         nand@0 {
 407                                 #address-cells = <1>;
 408                                 #size-cells = <1>;
 409
 410                                 partition@0 {
 411                                             label = "fs";
 412                                             reg = <0x00000000 0x01000000>;
 413                                 };
 414                         };
 415                 };
 416         };
 417
 418         pci0: pci@e0008000 {
 419                 cell-index = <0>;
 420                 #interrupt-cells = <1>;
 421                 #size-cells = <2>;
 422                 #address-cells = <3>;
 423                 compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
 424                 device_type = "pci";
 425                 reg = <0xe0008000 0x1000>;
 426                 clock-frequency = <33333333>;
 427                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 428                 interrupt-map = <
 429                                 /* IDSEL 28 */
 430                                  0xe000 0 0 1 &mpic 2 1
 431                                  0xe000 0 0 2 &mpic 3 1>;
 432
 433                 interrupt-parent = <&mpic>;
 434                 interrupts = <24 2>;
 435                 bus-range = <0 0>;
 436                 ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
 437                           0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
 438         };
 439
 440         pci1: pcie@e000a000 {
 441                 cell-index = <2>;
 442                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 443                 interrupt-map = <
 444                         /* IDSEL 0x0 (PEX) */
 445                         0x00000 0 0 1 &mpic 0 1
 446                         0x00000 0 0 2 &mpic 1 1
 447                         0x00000 0 0 3 &mpic 2 1
 448                         0x00000 0 0 4 &mpic 3 1>;
 449
 450                 interrupt-parent = <&mpic>;
 451                 interrupts = <26 2>;
 452                 bus-range = <0 0xff>;
 453                 ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x20000000
 454                           0x01000000 0 0x00000000 0xef000000 0 0x08000000>;
 455                 clock-frequency = <33333333>;
 456                 #interrupt-cells = <1>;
 457                 #size-cells = <2>;
 458                 #address-cells = <3>;
 459                 reg = <0xe000a000 0x1000>;
 460                 compatible = "fsl,mpc8548-pcie";
 461                 device_type = "pci";
 462                 pcie@0 {
 463                         reg = <0 0 0 0 0>;
 464                         #size-cells = <2>;
 465                         #address-cells = <3>;
 466                         device_type = "pci";
 467                         ranges = <0x02000000 0 0xc0000000 0x02000000 0
 468                                   0xc0000000 0 0x20000000
 469                                   0x01000000 0 0x00000000 0x01000000 0
 470                                   0x00000000 0 0x08000000>;
 471                 };
 472         };
 473 };