arch/powerpc/boot/dts/mpc8315erdb.dts

   1 /*
   2  * MPC8315E RDB Device Tree Source
   3  *
   4  * Copyright 2007 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         compatible = "fsl,mpc8315erdb";
  16         #address-cells = <1>;
  17         #size-cells = <1>;
  18
  19         aliases {
  20                 ethernet0 = &enet0;
  21                 ethernet1 = &enet1;
  22                 serial0 = &serial0;
  23                 serial1 = &serial1;
  24                 pci0 = &pci0;
  25                 pci1 = &pci1;
  26                 pci2 = &pci2;
  27         };
  28
  29         cpus {
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32
  33                 PowerPC,8315@0 {
  34                         device_type = "cpu";
  35                         reg = <0x0>;
  36                         d-cache-line-size = <32>;
  37                         i-cache-line-size = <32>;
  38                         d-cache-size = <16384>;
  39                         i-cache-size = <16384>;
  40                         timebase-frequency = <0>;       // from bootloader
  41                         bus-frequency = <0>;            // from bootloader
  42                         clock-frequency = <0>;          // from bootloader
  43                 };
  44         };
  45
  46         memory {
  47                 device_type = "memory";
  48                 reg = <0x00000000 0x08000000>;  // 128MB at 0
  49         };
  50
  51         localbus@e0005000 {
  52                 #address-cells = <2>;
  53                 #size-cells = <1>;
  54                 compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
  55                 reg = <0xe0005000 0x1000>;
  56                 interrupts = <77 0x8>;
  57                 interrupt-parent = <&ipic>;
  58
  59                 // CS0 and CS1 are swapped when
  60                 // booting from nand, but the
  61                 // addresses are the same.
  62                 ranges = <0x0 0x0 0xfe000000 0x00800000
  63                           0x1 0x0 0xe0600000 0x00002000
  64                           0x2 0x0 0xf0000000 0x00020000
  65                           0x3 0x0 0xfa000000 0x00008000>;
  66
  67                 flash@0,0 {
  68                         #address-cells = <1>;
  69                         #size-cells = <1>;
  70                         compatible = "cfi-flash";
  71                         reg = <0x0 0x0 0x800000>;
  72                         bank-width = <2>;
  73                         device-width = <1>;
  74                 };
  75
  76                 nand@1,0 {
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79                         compatible = "fsl,mpc8315-fcm-nand",
  80                                      "fsl,elbc-fcm-nand";
  81                         reg = <0x1 0x0 0x2000>;
  82
  83                         u-boot@0 {
  84                                 reg = <0x0 0x100000>;
  85                                 read-only;
  86                         };
  87
  88                         kernel@100000 {
  89                                 reg = <0x100000 0x300000>;
  90                         };
  91                         fs@400000 {
  92                                 reg = <0x400000 0x1c00000>;
  93                         };
  94                 };
  95         };
  96
  97         immr@e0000000 {
  98                 #address-cells = <1>;
  99                 #size-cells = <1>;
 100                 device_type = "soc";
 101                 compatible = "fsl,mpc8315-immr", "simple-bus";
 102                 ranges = <0 0xe0000000 0x00100000>;
 103                 reg = <0xe0000000 0x00000200>;
 104                 bus-frequency = <0>;
 105
 106                 wdt@200 {
 107                         device_type = "watchdog";
 108                         compatible = "mpc83xx_wdt";
 109                         reg = <0x200 0x100>;
 110                 };
 111
 112                 i2c@3000 {
 113                         #address-cells = <1>;
 114                         #size-cells = <0>;
 115                         cell-index = <0>;
 116                         compatible = "fsl-i2c";
 117                         reg = <0x3000 0x100>;
 118                         interrupts = <14 0x8>;
 119                         interrupt-parent = <&ipic>;
 120                         dfsrr;
 121                         rtc@68 {
 122                                 compatible = "dallas,ds1339";
 123                                 reg = <0x68>;
 124                         };
 125
 126                         mcu_pio: mcu@a {
 127                                 #gpio-cells = <2>;
 128                                 compatible = "fsl,mc9s08qg8-mpc8315erdb",
 129                                              "fsl,mcu-mpc8349emitx";
 130                                 reg = <0x0a>;
 131                                 gpio-controller;
 132                         };
 133                 };
 134
 135                 spi@7000 {
 136                         cell-index = <0>;
 137                         compatible = "fsl,spi";
 138                         reg = <0x7000 0x1000>;
 139                         interrupts = <16 0x8>;
 140                         interrupt-parent = <&ipic>;
 141                         mode = "cpu";
 142                 };
 143
 144                 dma@82a8 {
 145                         #address-cells = <1>;
 146                         #size-cells = <1>;
 147                         compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
 148                         reg = <0x82a8 4>;
 149                         ranges = <0 0x8100 0x1a8>;
 150                         interrupt-parent = <&ipic>;
 151                         interrupts = <71 8>;
 152                         cell-index = <0>;
 153                         dma-channel@0 {
 154                                 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
 155                                 reg = <0 0x80>;
 156                                 cell-index = <0>;
 157                                 interrupt-parent = <&ipic>;
 158                                 interrupts = <71 8>;
 159                         };
 160                         dma-channel@80 {
 161                                 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
 162                                 reg = <0x80 0x80>;
 163                                 cell-index = <1>;
 164                                 interrupt-parent = <&ipic>;
 165                                 interrupts = <71 8>;
 166                         };
 167                         dma-channel@100 {
 168                                 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
 169                                 reg = <0x100 0x80>;
 170                                 cell-index = <2>;
 171                                 interrupt-parent = <&ipic>;
 172                                 interrupts = <71 8>;
 173                         };
 174                         dma-channel@180 {
 175                                 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
 176                                 reg = <0x180 0x28>;
 177                                 cell-index = <3>;
 178                                 interrupt-parent = <&ipic>;
 179                                 interrupts = <71 8>;
 180                         };
 181                 };
 182
 183                 usb@23000 {
 184                         compatible = "fsl-usb2-dr";
 185                         reg = <0x23000 0x1000>;
 186                         #address-cells = <1>;
 187                         #size-cells = <0>;
 188                         interrupt-parent = <&ipic>;
 189                         interrupts = <38 0x8>;
 190                         phy_type = "utmi";
 191                 };
 192
 193                 enet0: ethernet@24000 {
 194                         #address-cells = <1>;
 195                         #size-cells = <1>;
 196                         cell-index = <0>;
 197                         device_type = "network";
 198                         model = "eTSEC";
 199                         compatible = "gianfar";
 200                         reg = <0x24000 0x1000>;
 201                         ranges = <0x0 0x24000 0x1000>;
 202                         local-mac-address = [ 00 00 00 00 00 00 ];
 203                         interrupts = <32 0x8 33 0x8 34 0x8>;
 204                         interrupt-parent = <&ipic>;
 205                         tbi-handle = <&tbi0>;
 206                         phy-handle = < &phy0 >;
 207
 208                         mdio@520 {
 209                                 #address-cells = <1>;
 210                                 #size-cells = <0>;
 211                                 compatible = "fsl,gianfar-mdio";
 212                                 reg = <0x520 0x20>;
 213
 214                                 phy0: ethernet-phy@0 {
 215                                         interrupt-parent = <&ipic>;
 216                                         interrupts = <20 0x8>;
 217                                         reg = <0x0>;
 218                                         device_type = "ethernet-phy";
 219                                 };
 220
 221                                 phy1: ethernet-phy@1 {
 222                                         interrupt-parent = <&ipic>;
 223                                         interrupts = <19 0x8>;
 224                                         reg = <0x1>;
 225                                         device_type = "ethernet-phy";
 226                                 };
 227
 228                                 tbi0: tbi-phy@11 {
 229                                         reg = <0x11>;
 230                                         device_type = "tbi-phy";
 231                                 };
 232                         };
 233                 };
 234
 235                 enet1: ethernet@25000 {
 236                         #address-cells = <1>;
 237                         #size-cells = <1>;
 238                         cell-index = <1>;
 239                         device_type = "network";
 240                         model = "eTSEC";
 241                         compatible = "gianfar";
 242                         reg = <0x25000 0x1000>;
 243                         ranges = <0x0 0x25000 0x1000>;
 244                         local-mac-address = [ 00 00 00 00 00 00 ];
 245                         interrupts = <35 0x8 36 0x8 37 0x8>;
 246                         interrupt-parent = <&ipic>;
 247                         tbi-handle = <&tbi1>;
 248                         phy-handle = < &phy1 >;
 249
 250                         mdio@520 {
 251                                 #address-cells = <1>;
 252                                 #size-cells = <0>;
 253                                 compatible = "fsl,gianfar-tbi";
 254                                 reg = <0x520 0x20>;
 255
 256                                 tbi1: tbi-phy@11 {
 257                                         reg = <0x11>;
 258                                         device_type = "tbi-phy";
 259                                 };
 260                         };
 261                 };
 262
 263                 serial0: serial@4500 {
 264                         cell-index = <0>;
 265                         device_type = "serial";
 266                         compatible = "ns16550";
 267                         reg = <0x4500 0x100>;
 268                         clock-frequency = <133333333>;
 269                         interrupts = <9 0x8>;
 270                         interrupt-parent = <&ipic>;
 271                 };
 272
 273                 serial1: serial@4600 {
 274                         cell-index = <1>;
 275                         device_type = "serial";
 276                         compatible = "ns16550";
 277                         reg = <0x4600 0x100>;
 278                         clock-frequency = <133333333>;
 279                         interrupts = <10 0x8>;
 280                         interrupt-parent = <&ipic>;
 281                 };
 282
 283                 crypto@30000 {
 284                         compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
 285                                      "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
 286                                      "fsl,sec2.0";
 287                         reg = <0x30000 0x10000>;
 288                         interrupts = <11 0x8>;
 289                         interrupt-parent = <&ipic>;
 290                         fsl,num-channels = <4>;
 291                         fsl,channel-fifo-len = <24>;
 292                         fsl,exec-units-mask = <0x97c>;
 293                         fsl,descriptor-types-mask = <0x3ab0abf>;
 294                 };
 295
 296                 sata@18000 {
 297                         compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
 298                         reg = <0x18000 0x1000>;
 299                         cell-index = <1>;
 300                         interrupts = <44 0x8>;
 301                         interrupt-parent = <&ipic>;
 302                 };
 303
 304                 sata@19000 {
 305                         compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
 306                         reg = <0x19000 0x1000>;
 307                         cell-index = <2>;
 308                         interrupts = <45 0x8>;
 309                         interrupt-parent = <&ipic>;
 310                 };
 311
 312                 /* IPIC
 313                  * interrupts cell = <intr #, sense>
 314                  * sense values match linux IORESOURCE_IRQ_* defines:
 315                  * sense == 8: Level, low assertion
 316                  * sense == 2: Edge, high-to-low change
 317                  */
 318                 ipic: interrupt-controller@700 {
 319                         interrupt-controller;
 320                         #address-cells = <0>;
 321                         #interrupt-cells = <2>;
 322                         reg = <0x700 0x100>;
 323                         device_type = "ipic";
 324                 };
 325         };
 326
 327         pci0: pci@e0008500 {
 328                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 329                 interrupt-map = <
 330                                 /* IDSEL 0x0E -mini PCI */
 331                                  0x7000 0x0 0x0 0x1 &ipic 18 0x8
 332                                  0x7000 0x0 0x0 0x2 &ipic 18 0x8
 333                                  0x7000 0x0 0x0 0x3 &ipic 18 0x8
 334                                  0x7000 0x0 0x0 0x4 &ipic 18 0x8
 335
 336                                 /* IDSEL 0x0F -mini PCI */
 337                                  0x7800 0x0 0x0 0x1 &ipic 17 0x8
 338                                  0x7800 0x0 0x0 0x2 &ipic 17 0x8
 339                                  0x7800 0x0 0x0 0x3 &ipic 17 0x8
 340                                  0x7800 0x0 0x0 0x4 &ipic 17 0x8
 341
 342                                 /* IDSEL 0x10 - PCI slot */
 343                                  0x8000 0x0 0x0 0x1 &ipic 48 0x8
 344                                  0x8000 0x0 0x0 0x2 &ipic 17 0x8
 345                                  0x8000 0x0 0x0 0x3 &ipic 48 0x8
 346                                  0x8000 0x0 0x0 0x4 &ipic 17 0x8>;
 347                 interrupt-parent = <&ipic>;
 348                 interrupts = <66 0x8>;
 349                 bus-range = <0x0 0x0>;
 350                 ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
 351                           0x42000000 0 0x80000000 0x80000000 0 0x10000000
 352                           0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
 353                 clock-frequency = <66666666>;
 354                 #interrupt-cells = <1>;
 355                 #size-cells = <2>;
 356                 #address-cells = <3>;
 357                 reg = <0xe0008500 0x100         /* internal registers */
 358                        0xe0008300 0x8>;         /* config space access registers */
 359                 compatible = "fsl,mpc8349-pci";
 360                 device_type = "pci";
 361         };
 362
 363         pci1: pcie@e0009000 {
 364                 #address-cells = <3>;
 365                 #size-cells = <2>;
 366                 #interrupt-cells = <1>;
 367                 device_type = "pci";
 368                 compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
 369                 reg = <0xe0009000 0x00001000>;
 370                 ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 371                           0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
 372                 bus-range = <0 255>;
 373                 interrupt-map-mask = <0xf800 0 0 7>;
 374                 interrupt-map = <0 0 0 1 &ipic 1 8
 375                                  0 0 0 2 &ipic 1 8
 376                                  0 0 0 3 &ipic 1 8
 377                                  0 0 0 4 &ipic 1 8>;
 378                 clock-frequency = <0>;
 379
 380                 pcie@0 {
 381                         #address-cells = <3>;
 382                         #size-cells = <2>;
 383                         device_type = "pci";
 384                         reg = <0 0 0 0 0>;
 385                         ranges = <0x02000000 0 0xa0000000
 386                                   0x02000000 0 0xa0000000
 387                                   0 0x10000000
 388                                   0x01000000 0 0x00000000
 389                                   0x01000000 0 0x00000000
 390                                   0 0x00800000>;
 391                 };
 392         };
 393
 394         pci2: pcie@e000a000 {
 395                 #address-cells = <3>;
 396                 #size-cells = <2>;
 397                 #interrupt-cells = <1>;
 398                 device_type = "pci";
 399                 compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
 400                 reg = <0xe000a000 0x00001000>;
 401                 ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
 402                           0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
 403                 bus-range = <0 255>;
 404                 interrupt-map-mask = <0xf800 0 0 7>;
 405                 interrupt-map = <0 0 0 1 &ipic 2 8
 406                                  0 0 0 2 &ipic 2 8
 407                                  0 0 0 3 &ipic 2 8
 408                                  0 0 0 4 &ipic 2 8>;
 409                 clock-frequency = <0>;
 410
 411                 pcie@0 {
 412                         #address-cells = <3>;
 413                         #size-cells = <2>;
 414                         device_type = "pci";
 415                         reg = <0 0 0 0 0>;
 416                         ranges = <0x02000000 0 0xc0000000
 417                                   0x02000000 0 0xc0000000
 418                                   0 0x10000000
 419                                   0x01000000 0 0x00000000
 420                                   0x01000000 0 0x00000000
 421                                   0 0x00800000>;
 422                 };
 423         };
 424 };