arch/powerpc/boot/dts/lite5200.dts

   1 /*
   2  * Lite5200 board Device Tree Source
   3  *
   4  * Copyright 2006-2007 Secret Lab Technologies Ltd.
   5  * Grant Likely <grant.likely@secretlab.ca>
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13 /*
  14  * WARNING: Do not depend on this tree layout remaining static just yet.
  15  * The MPC5200 device tree conventions are still in flux
  16  * Keep an eye on the linuxppc-dev mailing list for more details
  17  */
  18
  19 / {
  20         model = "fsl,lite5200";
  21         // revision = "1.0";
  22         compatible = "fsl,lite5200\0generic-mpc5200";
  23         #address-cells = <1>;
  24         #size-cells = <1>;
  25
  26         cpus {
  27                 #cpus = <1>;
  28                 #address-cells = <1>;
  29                 #size-cells = <0>;
  30
  31                 PowerPC,5200@0 {
  32                         device_type = "cpu";
  33                         reg = <0>;
  34                         d-cache-line-size = <20>;
  35                         i-cache-line-size = <20>;
  36                         d-cache-size = <4000>;          // L1, 16K
  37                         i-cache-size = <4000>;          // L1, 16K
  38                         timebase-frequency = <0>;       // from bootloader
  39                         bus-frequency = <0>;            // from bootloader
  40                         clock-frequency = <0>;          // from bootloader
  41                         32-bit;
  42                 };
  43         };
  44
  45         memory {
  46                 device_type = "memory";
  47                 reg = <00000000 04000000>;      // 64MB
  48         };
  49
  50         soc5200@f0000000 {
  51                 model = "fsl,mpc5200";
  52                 revision = ""                   // from bootloader
  53                 #interrupt-cells = <3>;
  54                 device_type = "soc";
  55                 ranges = <0 f0000000 f0010000>;
  56                 reg = <f0000000 00010000>;
  57                 bus-frequency = <0>;            // from bootloader
  58                 system-frequency = <0>;         // from bootloader
  59
  60                 cdm@200 {
  61                         compatible = "mpc5200-cdm";
  62                         reg = <200 38>;
  63                 };
  64
  65                 pic@500 {
  66                         // 5200 interrupts are encoded into two levels;
  67                         linux,phandle = <500>;
  68                         interrupt-controller;
  69                         #interrupt-cells = <3>;
  70                         device_type = "interrupt-controller";
  71                         compatible = "mpc5200-pic";
  72                         reg = <500 80>;
  73                         built-in;
  74                 };
  75
  76                 gpt@600 {       // General Purpose Timer
  77                         compatible = "mpc5200-gpt";
  78                         device_type = "gpt";
  79                         cell-index = <0>;
  80                         reg = <600 10>;
  81                         interrupts = <1 9 0>;
  82                         interrupt-parent = <500>;
  83                         has-wdt;
  84                 };
  85
  86                 gpt@610 {       // General Purpose Timer
  87                         compatible = "mpc5200-gpt";
  88                         device_type = "gpt";
  89                         cell-index = <1>;
  90                         reg = <610 10>;
  91                         interrupts = <1 a 0>;
  92                         interrupt-parent = <500>;
  93                 };
  94
  95                 gpt@620 {       // General Purpose Timer
  96                         compatible = "mpc5200-gpt";
  97                         device_type = "gpt";
  98                         cell-index = <2>;
  99                         reg = <620 10>;
 100                         interrupts = <1 b 0>;
 101                         interrupt-parent = <500>;
 102                 };
 103
 104                 gpt@630 {       // General Purpose Timer
 105                         compatible = "mpc5200-gpt";
 106                         device_type = "gpt";
 107                         cell-index = <3>;
 108                         reg = <630 10>;
 109                         interrupts = <1 c 0>;
 110                         interrupt-parent = <500>;
 111                 };
 112
 113                 gpt@640 {       // General Purpose Timer
 114                         compatible = "mpc5200-gpt";
 115                         device_type = "gpt";
 116                         cell-index = <4>;
 117                         reg = <640 10>;
 118                         interrupts = <1 d 0>;
 119                         interrupt-parent = <500>;
 120                 };
 121
 122                 gpt@650 {       // General Purpose Timer
 123                         compatible = "mpc5200-gpt";
 124                         device_type = "gpt";
 125                         cell-index = <5>;
 126                         reg = <650 10>;
 127                         interrupts = <1 e 0>;
 128                         interrupt-parent = <500>;
 129                 };
 130
 131                 gpt@660 {       // General Purpose Timer
 132                         compatible = "mpc5200-gpt";
 133                         device_type = "gpt";
 134                         cell-index = <6>;
 135                         reg = <660 10>;
 136                         interrupts = <1 f 0>;
 137                         interrupt-parent = <500>;
 138                 };
 139
 140                 gpt@670 {       // General Purpose Timer
 141                         compatible = "mpc5200-gpt";
 142                         device_type = "gpt";
 143                         cell-index = <7>;
 144                         reg = <670 10>;
 145                         interrupts = <1 10 0>;
 146                         interrupt-parent = <500>;
 147                 };
 148
 149                 rtc@800 {       // Real time clock
 150                         compatible = "mpc5200-rtc";
 151                         device_type = "rtc";
 152                         reg = <800 100>;
 153                         interrupts = <1 5 0 1 6 0>;
 154                         interrupt-parent = <500>;
 155                 };
 156
 157                 mscan@900 {
 158                         device_type = "mscan";
 159                         compatible = "mpc5200-mscan";
 160                         cell-index = <0>;
 161                         interrupts = <2 11 0>;
 162                         interrupt-parent = <500>;
 163                         reg = <900 80>;
 164                 };
 165
 166                 mscan@980 {
 167                         device_type = "mscan";
 168                         compatible = "mpc5200-mscan";
 169                         cell-index = <1>;
 170                         interrupts = <1 12 0>;
 171                         interrupt-parent = <500>;
 172                         reg = <980 80>;
 173                 };
 174
 175                 gpio@b00 {
 176                         compatible = "mpc5200-gpio";
 177                         reg = <b00 40>;
 178                         interrupts = <1 7 0>;
 179                         interrupt-parent = <500>;
 180                 };
 181
 182                 gpio-wkup@b00 {
 183                         compatible = "mpc5200-gpio-wkup";
 184                         reg = <c00 40>;
 185                         interrupts = <1 8 0 0 3 0>;
 186                         interrupt-parent = <500>;
 187                 };
 188
 189                 pci@0d00 {
 190                         #interrupt-cells = <1>;
 191                         #size-cells = <2>;
 192                         #address-cells = <3>;
 193                         device_type = "pci";
 194                         compatible = "mpc5200-pci";
 195                         reg = <d00 100>;
 196                         interrupt-map-mask = <f800 0 0 7>;
 197                         interrupt-map = <c000 0 0 1 500 0 0 3
 198                                          c000 0 0 2 500 0 0 3
 199                                          c000 0 0 3 500 0 0 3
 200                                          c000 0 0 4 500 0 0 3>;
 201                         clock-frequency = <0>; // From boot loader
 202                         interrupts = <2 8 0 2 9 0 2 a 0>;
 203                         interrupt-parent = <500>;
 204                         bus-range = <0 0>;
 205                         ranges = <42000000 0 80000000 80000000 0 20000000
 206                                   02000000 0 a0000000 a0000000 0 10000000
 207                                   01000000 0 00000000 b0000000 0 01000000>;
 208                 };
 209
 210                 spi@f00 {
 211                         device_type = "spi";
 212                         compatible = "mpc5200-spi";
 213                         reg = <f00 20>;
 214                         interrupts = <2 d 0 2 e 0>;
 215                         interrupt-parent = <500>;
 216                 };
 217
 218                 usb@1000 {
 219                         device_type = "usb-ohci-be";
 220                         compatible = "mpc5200-ohci\0ohci-be";
 221                         reg = <1000 ff>;
 222                         interrupts = <2 6 0>;
 223                         interrupt-parent = <500>;
 224                 };
 225
 226                 bestcomm@1200 {
 227                         device_type = "dma-controller";
 228                         compatible = "mpc5200-bestcomm";
 229                         reg = <1200 80>;
 230                         interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
 231                                       3 4 0  3 5 0  3 6 0  3 7 0
 232                                       3 8 0  3 9 0  3 a 0  3 b 0
 233                                       3 c 0  3 d 0  3 e 0  3 f 0>;
 234                         interrupt-parent = <500>;
 235                 };
 236
 237                 xlb@1f00 {
 238                         compatible = "mpc5200-xlb";
 239                         reg = <1f00 100>;
 240                 };
 241
 242                 serial@2000 {           // PSC1
 243                         device_type = "serial";
 244                         compatible = "mpc5200-psc-uart";
 245                         port-number = <0>;  // Logical port assignment
 246                         cell-index = <0>;
 247                         reg = <2000 100>;
 248                         interrupts = <2 1 0>;
 249                         interrupt-parent = <500>;
 250                 };
 251
 252                 // PSC2 in ac97 mode example
 253                 //ac97@2200 {           // PSC2
 254                 //      device_type = "sound";
 255                 //      compatible = "mpc5200-psc-ac97";
 256                 //      cell-index = <1>;
 257                 //      reg = <2200 100>;
 258                 //      interrupts = <2 2 0>;
 259                 //      interrupt-parent = <500>;
 260                 //};
 261
 262                 // PSC3 in CODEC mode example
 263                 //i2s@2400 {            // PSC3
 264                 //      device_type = "sound";
 265                 //      compatible = "mpc5200-psc-i2s";
 266                 //      cell-index = <2>;
 267                 //      reg = <2400 100>;
 268                 //      interrupts = <2 3 0>;
 269                 //      interrupt-parent = <500>;
 270                 //};
 271
 272                 // PSC4 in uart mode example
 273                 //serial@2600 {         // PSC4
 274                 //      device_type = "serial";
 275                 //      compatible = "mpc5200-psc-uart";
 276                 //      cell-index = <3>;
 277                 //      reg = <2600 100>;
 278                 //      interrupts = <2 b 0>;
 279                 //      interrupt-parent = <500>;
 280                 //};
 281
 282                 // PSC5 in uart mode example
 283                 //serial@2800 {         // PSC5
 284                 //      device_type = "serial";
 285                 //      compatible = "mpc5200-psc-uart";
 286                 //      cell-index = <4>;
 287                 //      reg = <2800 100>;
 288                 //      interrupts = <2 c 0>;
 289                 //      interrupt-parent = <500>;
 290                 //};
 291
 292                 // PSC6 in spi mode example
 293                 //spi@2c00 {            // PSC6
 294                 //      device_type = "spi";
 295                 //      compatible = "mpc5200-psc-spi";
 296                 //      cell-index = <5>;
 297                 //      reg = <2c00 100>;
 298                 //      interrupts = <2 4 0>;
 299                 //      interrupt-parent = <500>;
 300                 //};
 301
 302                 ethernet@3000 {
 303                         device_type = "network";
 304                         compatible = "mpc5200-fec";
 305                         reg = <3000 800>;
 306                         mac-address = [ 02 03 04 05 06 07 ]; // Bad!
 307                         interrupts = <2 5 0>;
 308                         interrupt-parent = <500>;
 309                 };
 310
 311                 ata@3a00 {
 312                         device_type = "ata";
 313                         compatible = "mpc5200-ata";
 314                         reg = <3a00 100>;
 315                         interrupts = <2 7 0>;
 316                         interrupt-parent = <500>;
 317                 };
 318
 319                 i2c@3d00 {
 320                         device_type = "i2c";
 321                         compatible = "mpc5200-i2c";
 322                         cell-index = <0>;
 323                         reg = <3d00 40>;
 324                         interrupts = <2 f 0>;
 325                         interrupt-parent = <500>;
 326                 };
 327
 328                 i2c@3d40 {
 329                         device_type = "i2c";
 330                         compatible = "mpc5200-i2c";
 331                         cell-index = <1>;
 332                         reg = <3d40 40>;
 333                         interrupts = <2 10 0>;
 334                         interrupt-parent = <500>;
 335                 };
 336                 sram@8000 {
 337                         device_type = "sram";
 338                         compatible = "mpc5200-sram\0sram";
 339                         reg = <8000 4000>;
 340                 };
 341         };
 342 };