arch/powerpc/boot/dts/kmeter1.dts

   1 /*
   2  * Keymile KMETER1 Device Tree Source
   3  *
   4  * 2008 DENX Software Engineering GmbH
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         model = "KMETER1";
  16         compatible = "keymile,KMETER1";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19
  20         aliases {
  21                 ethernet0 = &enet_piggy2;
  22                 ethernet1 = &enet_estar1;
  23                 ethernet2 = &enet_estar2;
  24                 ethernet3 = &enet_eth1;
  25                 ethernet4 = &enet_eth2;
  26                 ethernet5 = &enet_eth3;
  27                 ethernet6 = &enet_eth4;
  28                 serial0 = &serial0;
  29         };
  30
  31         cpus {
  32                 #address-cells = <1>;
  33                 #size-cells = <0>;
  34
  35                 PowerPC,8360@0 {
  36                         device_type = "cpu";
  37                         reg = <0x0>;
  38                         d-cache-line-size = <32>;       // 32 bytes
  39                         i-cache-line-size = <32>;       // 32 bytes
  40                         d-cache-size = <32768>;         // L1, 32K
  41                         i-cache-size = <32768>;         // L1, 32K
  42                         timebase-frequency = <0>;       /* Filled in by U-Boot */
  43                         bus-frequency = <0>;    /* Filled in by U-Boot */
  44                         clock-frequency = <0>;  /* Filled in by U-Boot */
  45                 };
  46         };
  47
  48         memory {
  49                 device_type = "memory";
  50                 reg = <0 0>;    /* Filled in by U-Boot */
  51         };
  52
  53         soc8360@e0000000 {
  54                 #address-cells = <1>;
  55                 #size-cells = <1>;
  56                 device_type = "soc";
  57                 compatible = "fsl,mpc8360-immr", "simple-bus";
  58                 ranges = <0x0 0xe0000000 0x00200000>;
  59                 reg = <0xe0000000 0x00000200>;
  60                 bus-frequency = <0>;    /* Filled in by U-Boot */
  61
  62                 pmc: power@b00 {
  63                         compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
  64                         reg = <0xb00 0x100 0xa00 0x100>;
  65                         interrupts = <80 0x8>;
  66                         interrupt-parent = <&ipic>;
  67                 };
  68
  69                 i2c@3000 {
  70                         #address-cells = <1>;
  71                         #size-cells = <0>;
  72                         cell-index = <0>;
  73                         compatible = "fsl-i2c";
  74                         reg = <0x3000 0x100>;
  75                         interrupts = <14 0x8>;
  76                         interrupt-parent = <&ipic>;
  77                         dfsrr;
  78                 };
  79
  80                 serial0: serial@4500 {
  81                         cell-index = <0>;
  82                         device_type = "serial";
  83                         compatible = "ns16550";
  84                         reg = <0x4500 0x100>;
  85                         clock-frequency = <264000000>;
  86                         interrupts = <9 0x8>;
  87                         interrupt-parent = <&ipic>;
  88                 };
  89
  90                 dma@82a8 {
  91                         #address-cells = <1>;
  92                         #size-cells = <1>;
  93                         compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
  94                         reg = <0x82a8 4>;
  95                         ranges = <0 0x8100 0x1a8>;
  96                         interrupt-parent = <&ipic>;
  97                         interrupts = <71 8>;
  98                         cell-index = <0>;
  99                         dma-channel@0 {
 100                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 101                                 reg = <0 0x80>;
 102                                 interrupt-parent = <&ipic>;
 103                                 interrupts = <71 8>;
 104                         };
 105                         dma-channel@80 {
 106                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 107                                 reg = <0x80 0x80>;
 108                                 interrupt-parent = <&ipic>;
 109                                 interrupts = <71 8>;
 110                         };
 111                         dma-channel@100 {
 112                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 113                                 reg = <0x100 0x80>;
 114                                 interrupt-parent = <&ipic>;
 115                                 interrupts = <71 8>;
 116                         };
 117                         dma-channel@180 {
 118                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 119                                 reg = <0x180 0x28>;
 120                                 interrupt-parent = <&ipic>;
 121                                 interrupts = <71 8>;
 122                         };
 123                 };
 124
 125                 ipic: pic@700 {
 126                         #address-cells = <0>;
 127                         #interrupt-cells = <2>;
 128                         compatible = "fsl,pq2pro-pic", "fsl,ipic";
 129                         interrupt-controller;
 130                         reg = <0x700 0x100>;
 131                 };
 132
 133                 par_io@1400 {
 134                         #address-cells = <1>;
 135                         #size-cells = <0>;
 136                         reg = <0x1400 0x100>;
 137                         compatible = "fsl,mpc8360-par_io";
 138                         num-ports = <7>;
 139
 140                         pio_ucc1: ucc_pin@0 {
 141                                 reg = <0>;
 142
 143                                 pio-map = <
 144                                         /* port pin dir open_drain assignment has_irq */
 145                                         0   1  3  0  2  0       /* MDIO   */
 146                                         0   2  1  0  1  0       /* MDC    */
 147
 148                                         0   3  1  0  1  0       /* TxD0   */
 149                                         0   4  1  0  1  0       /* TxD1   */
 150                                         0   5  1  0  1  0       /* TxD2   */
 151                                         0   6  1  0  1  0       /* TxD3   */
 152                                         0   9  2  0  1  0       /* RxD0   */
 153                                         0  10  2  0  1  0       /* RxD1   */
 154                                         0  11  2  0  1  0       /* RxD2   */
 155                                         0  12  2  0  1  0       /* RxD3   */
 156                                         0   7  1  0  1  0       /* TX_EN  */
 157                                         0   8  1  0  1  0       /* TX_ER  */
 158                                         0  15  2  0  1  0       /* RX_DV  */
 159                                         0  16  2  0  1  0       /* RX_ER  */
 160                                         0   0  2  0  1  0       /* RX_CLK */
 161                                         2   9  1  0  3  0       /* GTX_CLK - CLK10 */
 162                                         2   8  2  0  1  0       /* GTX125  - CLK9  */
 163                                 >;
 164                         };
 165
 166                         pio_ucc2: ucc_pin@1 {
 167                                 reg = <1>;
 168
 169                                 pio-map = <
 170                                         /* port pin dir open_drain assignment has_irq */
 171                                         0   1  3  0  2  0       /* MDIO   */
 172                                         0   2  1  0  1  0       /* MDC    */
 173
 174                                         0  17  1  0  1  0       /* TxD0   */
 175                                         0  18  1  0  1  0       /* TxD1   */
 176                                         0  19  1  0  1  0       /* TxD2   */
 177                                         0  20  1  0  1  0       /* TxD3   */
 178                                         0  23  2  0  1  0       /* RxD0   */
 179                                         0  24  2  0  1  0       /* RxD1   */
 180                                         0  25  2  0  1  0       /* RxD2   */
 181                                         0  26  2  0  1  0       /* RxD3   */
 182                                         0  21  1  0  1  0       /* TX_EN  */
 183                                         0  22  1  0  1  0       /* TX_ER  */
 184                                         0  29  2  0  1  0       /* RX_DV  */
 185                                         0  30  2  0  1  0       /* RX_ER  */
 186                                         0  31  2  0  1  0       /* RX_CLK */
 187                                         2  2   1  0  2  0       /* GTX_CLK - CLK3  */
 188                                         2  3   2  0  1  0       /* GTX125  - CLK4  */
 189                                 >;
 190                         };
 191
 192                         pio_ucc4: ucc_pin@3 {
 193                                 reg = <3>;
 194
 195                                 pio-map = <
 196                                         /* port pin dir open_drain assignment has_irq */
 197                                         0   1  3  0  2  0       /* MDIO */
 198                                         0   2  1  0  1  0       /* MDC  */
 199
 200                                         1  14  1  0  1  0       /* TxD0   (PB14, out, f1) */
 201                                         1  15  1  0  1  0       /* TxD1   (PB15, out, f1) */
 202                                         1  20  2  0  1  0       /* RxD0   (PB20, in,  f1) */
 203                                         1  21  2  0  1  0       /* RxD1   (PB21, in,  f1) */
 204                                         1  18  1  0  1  0       /* TX_EN  (PB18, out, f1) */
 205                                         1  26  2  0  1  0       /* RX_DV  (PB26, in,  f1) */
 206                                         1  27  2  0  1  0       /* RX_ER  (PB27, in,  f1) */
 207
 208                                         2  16  2  0  1  0       /* UCC4_RMII_CLK (CLK17) */
 209                                 >;
 210                         };
 211
 212                         pio_ucc5: ucc_pin@4 {
 213                                 reg = <4>;
 214
 215                                 pio-map = <
 216                                         /* port pin dir open_drain assignment has_irq */
 217                                         0   1  3  0  2  0       /* MDIO */
 218                                         0   2  1  0  1  0       /* MDC  */
 219
 220                                         3   0  1  0  1  0       /* TxD0  (PD0,  out, f1) */
 221                                         3   1  1  0  1  0       /* TxD1  (PD1,  out, f1) */
 222                                         3   6  2  0  1  0       /* RxD0  (PD6,   in, f1) */
 223                                         3   7  2  0  1  0       /* RxD1  (PD7,   in, f1) */
 224                                         3   4  1  0  1  0       /* TX_EN (PD4,  out, f1) */
 225                                         3  12  2  0  1  0       /* RX_DV (PD12,  in, f1) */
 226                                         3  13  2  0  1  0       /* RX_ER (PD13,  in, f1) */
 227                                 >;
 228                         };
 229
 230                         pio_ucc6: ucc_pin@5 {
 231                                 reg = <5>;
 232
 233                                 pio-map = <
 234                                         /* port pin dir open_drain assignment has_irq */
 235                                         0   1  3  0  2  0       /* MDIO */
 236                                         0   2  1  0  1  0       /* MDC  */
 237
 238                                         3  14  1  0  1  0       /* TxD0   (PD14, out, f1) */
 239                                         3  15  1  0  1  0       /* TxD1   (PD15, out, f1) */
 240                                         3  20  2  0  1  0       /* RxD0   (PD20, in,  f1) */
 241                                         3  21  2  0  1  0       /* RxD1   (PD21, in,  f1) */
 242                                         3  18  1  0  1  0       /* TX_EN  (PD18, out, f1) */
 243                                         3  26  2  0  1  0       /* RX_DV  (PD26, in,  f1) */
 244                                         3  27  2  0  1  0       /* RX_ER  (PD27, in,  f1) */
 245                                 >;
 246                         };
 247
 248                         pio_ucc7: ucc_pin@6 {
 249                                 reg = <6>;
 250
 251                                 pio-map = <
 252                                         /* port pin dir open_drain assignment has_irq */
 253                                         0   1  3  0  2  0       /* MDIO */
 254                                         0   2  1  0  1  0       /* MDC  */
 255
 256                                         4   0  1  0  1  0       /* TxD0   (PE0,  out, f1) */
 257                                         4   1  1  0  1  0       /* TxD1   (PE1,  out, f1) */
 258                                         4   6  2  0  1  0       /* RxD0   (PE6,   in, f1) */
 259                                         4   7  2  0  1  0       /* RxD1   (PE7,   in, f1) */
 260                                         4   4  1  0  1  0       /* TX_EN  (PE4,  out, f1) */
 261                                         4  12  2  0  1  0       /* RX_DV  (PE12,  in, f1) */
 262                                         4  13  2  0  1  0       /* RX_ER  (PE13,  in, f1) */
 263                                 >;
 264                         };
 265
 266                         pio_ucc8: ucc_pin@7 {
 267                                 reg = <7>;
 268
 269                                 pio-map = <
 270                                         /* port pin dir open_drain assignment has_irq */
 271                                         0   1  3  0  2  0       /* MDIO */
 272                                         0   2  1  0  1  0       /* MDC  */
 273
 274                                         4  14  1  0  2  0       /* TxD0   (PE14, out, f2) */
 275                                         4  15  1  0  1  0       /* TxD1   (PE15, out, f1) */
 276                                         4  20  2  0  1  0       /* RxD0   (PE20, in,  f1) */
 277                                         4  21  2  0  1  0       /* RxD1   (PE21, in,  f1) */
 278                                         4  18  1  0  1  0       /* TX_EN  (PE18, out, f1) */
 279                                         4  26  2  0  1  0       /* RX_DV  (PE26, in,  f1) */
 280                                         4  27  2  0  1  0       /* RX_ER  (PE27, in,  f1) */
 281
 282                                         2  15  2  0  1  0       /* UCCx_RMII_CLK (CLK16) */
 283                                 >;
 284                         };
 285
 286                 };
 287
 288                 qe@100000 {
 289                         #address-cells = <1>;
 290                         #size-cells = <1>;
 291                         compatible = "fsl,qe";
 292                         ranges = <0x0 0x100000 0x100000>;
 293                         reg = <0x100000 0x480>;
 294                         clock-frequency = <0>;  /* Filled in by U-Boot */
 295                         brg-frequency = <0>;    /* Filled in by U-Boot */
 296                         bus-frequency = <0>;    /* Filled in by U-Boot */
 297
 298                         muram@10000 {
 299                                 #address-cells = <1>;
 300                                 #size-cells = <1>;
 301                                 compatible = "fsl,qe-muram", "fsl,cpm-muram";
 302                                 ranges = <0x0 0x00010000 0x0000c000>;
 303
 304                                 data-only@0 {
 305                                         compatible = "fsl,qe-muram-data",
 306                                                      "fsl,cpm-muram-data";
 307                                         reg = <0x0 0xc000>;
 308                                 };
 309                         };
 310
 311                         /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
 312                         enet_estar1: ucc@2000 {
 313                                 device_type = "network";
 314                                 compatible = "ucc_geth";
 315                                 cell-index = <1>;
 316                                 reg = <0x2000 0x200>;
 317                                 interrupts = <32>;
 318                                 interrupt-parent = <&qeic>;
 319                                 local-mac-address = [ 00 00 00 00 00 00 ];
 320                                 rx-clock-name = "none";
 321                                 tx-clock-name = "clk9";
 322                                 phy-handle = <&phy_estar1>;
 323                                 phy-connection-type = "rgmii-id";
 324                                 pio-handle = <&pio_ucc1>;
 325                         };
 326
 327                         /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
 328                         enet_estar2: ucc@3000 {
 329                                 device_type = "network";
 330                                 compatible = "ucc_geth";
 331                                 cell-index = <2>;
 332                                 reg = <0x3000 0x200>;
 333                                 interrupts = <33>;
 334                                 interrupt-parent = <&qeic>;
 335                                 local-mac-address = [ 00 00 00 00 00 00 ];
 336                                 rx-clock-name = "none";
 337                                 tx-clock-name = "clk4";
 338                                 phy-handle = <&phy_estar2>;
 339                                 phy-connection-type = "rgmii-id";
 340                                 pio-handle = <&pio_ucc2>;
 341                         };
 342
 343                         /* Piggy2 (UCC4, MDIO 0x00, RMII) */
 344                         enet_piggy2: ucc@3200 {
 345                                 device_type = "network";
 346                                 compatible = "ucc_geth";
 347                                 cell-index = <4>;
 348                                 reg = <0x3200 0x200>;
 349                                 interrupts = <35>;
 350                                 interrupt-parent = <&qeic>;
 351                                 local-mac-address = [ 00 00 00 00 00 00 ];
 352                                 rx-clock-name = "none";
 353                                 tx-clock-name = "clk17";
 354                                 phy-handle = <&phy_piggy2>;
 355                                 phy-connection-type = "rmii";
 356                                 pio-handle = <&pio_ucc4>;
 357                         };
 358
 359                         /* Eth-1 (UCC5, MDIO 0x08, RMII) */
 360                         enet_eth1: ucc@2400 {
 361                                 device_type = "network";
 362                                 compatible = "ucc_geth";
 363                                 cell-index = <5>;
 364                                 reg = <0x2400 0x200>;
 365                                 interrupts = <40>;
 366                                 interrupt-parent = <&qeic>;
 367                                 local-mac-address = [ 00 00 00 00 00 00 ];
 368                                 rx-clock-name = "none";
 369                                 tx-clock-name = "clk16";
 370                                 phy-handle = <&phy_eth1>;
 371                                 phy-connection-type = "rmii";
 372                                 pio-handle = <&pio_ucc5>;
 373                         };
 374
 375                         /* Eth-2 (UCC6, MDIO 0x09, RMII) */
 376                         enet_eth2: ucc@3400 {
 377                                 device_type = "network";
 378                                 compatible = "ucc_geth";
 379                                 cell-index = <6>;
 380                                 reg = <0x3400 0x200>;
 381                                 interrupts = <41>;
 382                                 interrupt-parent = <&qeic>;
 383                                 local-mac-address = [ 00 00 00 00 00 00 ];
 384                                 rx-clock-name = "none";
 385                                 tx-clock-name = "clk16";
 386                                 phy-handle = <&phy_eth2>;
 387                                 phy-connection-type = "rmii";
 388                                 pio-handle = <&pio_ucc6>;
 389                         };
 390
 391                         /* Eth-3 (UCC7, MDIO 0x0a, RMII) */
 392                         enet_eth3: ucc@2600 {
 393                                 device_type = "network";
 394                                 compatible = "ucc_geth";
 395                                 cell-index = <7>;
 396                                 reg = <0x2600 0x200>;
 397                                 interrupts = <42>;
 398                                 interrupt-parent = <&qeic>;
 399                                 local-mac-address = [ 00 00 00 00 00 00 ];
 400                                 rx-clock-name = "none";
 401                                 tx-clock-name = "clk16";
 402                                 phy-handle = <&phy_eth3>;
 403                                 phy-connection-type = "rmii";
 404                                 pio-handle = <&pio_ucc7>;
 405                         };
 406
 407                         /* Eth-4 (UCC8, MDIO 0x0b, RMII) */
 408                         enet_eth4: ucc@3600 {
 409                                 device_type = "network";
 410                                 compatible = "ucc_geth";
 411                                 cell-index = <8>;
 412                                 reg = <0x3600 0x200>;
 413                                 interrupts = <43>;
 414                                 interrupt-parent = <&qeic>;
 415                                 local-mac-address = [ 00 00 00 00 00 00 ];
 416                                 rx-clock-name = "none";
 417                                 tx-clock-name = "clk16";
 418                                 phy-handle = <&phy_eth4>;
 419                                 phy-connection-type = "rmii";
 420                                 pio-handle = <&pio_ucc8>;
 421                         };
 422
 423                         mdio@3320 {
 424                                 #address-cells = <1>;
 425                                 #size-cells = <0>;
 426                                 reg = <0x3320 0x18>;
 427                                 compatible = "fsl,ucc-mdio";
 428
 429                                 /* Piggy2 (UCC4, MDIO 0x00, RMII) */
 430                                 phy_piggy2: ethernet-phy@00 {
 431                                         reg = <0x0>;
 432                                 };
 433
 434                                 /* Eth-1 (UCC5, MDIO 0x08, RMII) */
 435                                 phy_eth1: ethernet-phy@08 {
 436                                         reg = <0x08>;
 437                                 };
 438
 439                                 /* Eth-2 (UCC6, MDIO 0x09, RMII) */
 440                                 phy_eth2: ethernet-phy@09 {
 441                                         reg = <0x09>;
 442                                 };
 443
 444                                 /* Eth-3 (UCC7, MDIO 0x0a, RMII) */
 445                                 phy_eth3: ethernet-phy@0a {
 446                                         reg = <0x0a>;
 447                                 };
 448
 449                                 /* Eth-4 (UCC8, MDIO 0x0b, RMII) */
 450                                 phy_eth4: ethernet-phy@0b {
 451                                         reg = <0x0b>;
 452                                 };
 453
 454                                 /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
 455                                 phy_estar1: ethernet-phy@10 {
 456                                         interrupt-parent = <&ipic>;
 457                                         interrupts = <17 0x8>;
 458                                         reg = <0x10>;
 459                                 };
 460
 461                                 /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
 462                                 phy_estar2: ethernet-phy@11 {
 463                                         interrupt-parent = <&ipic>;
 464                                         interrupts = <18 0x8>;
 465                                         reg = <0x11>;
 466                                 };
 467                         };
 468
 469                         qeic: interrupt-controller@80 {
 470                                 interrupt-controller;
 471                                 compatible = "fsl,qe-ic";
 472                                 #address-cells = <0>;
 473                                 #interrupt-cells = <1>;
 474                                 reg = <0x80 0x80>;
 475                                 interrupts = <32 8 33 8>;
 476                                 interrupt-parent = <&ipic>;
 477                         };
 478                 };
 479         };
 480
 481         localbus@e0005000 {
 482                 #address-cells = <2>;
 483                 #size-cells = <1>;
 484                 compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
 485                              "simple-bus";
 486                 reg = <0xe0005000 0xd8>;
 487                 ranges = <0 0 0xf0000000 0x04000000>;   /* Filled in by U-Boot */
 488
 489                 flash@f0000000,0 {
 490                         compatible = "cfi-flash";
 491                         /*
 492                          * The Intel P30 chip has 2 non-identical chips on
 493                          * one die, so we need to define 2 seperate regions
 494                          * that are scanned by physmap_of independantly.
 495                          */
 496                         reg = <0 0x00000000 0x02000000
 497                                0 0x02000000 0x02000000>;        /* Filled in by U-Boot */
 498                         bank-width = <2>;
 499                         #address-cells = <1>;
 500                         #size-cells = <1>;
 501                         partition@0 {
 502                                 label = "u-boot";
 503                                 reg = <0 0x40000>;
 504                         };
 505                         partition@40000 {
 506                                 label = "env";
 507                                 reg = <0x40000 0x40000>;
 508                         };
 509                         partition@80000 {
 510                                 label = "dtb";
 511                                 reg = <0x80000 0x20000>;
 512                         };
 513                         partition@a0000 {
 514                                 label = "kernel";
 515                                 reg = <0xa0000 0x300000>;
 516                         };
 517                         partition@3a0000 {
 518                                 label = "ramdisk";
 519                                 reg = <0x3a0000 0x800000>;
 520                         };
 521                         partition@ba0000 {
 522                                 label = "user";
 523                                 reg = <0xba0000 0x3460000>;
 524                         };
 525                 };
 526         };
 527 };