treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
[sfrench/cifs-2.6.git] / arch / powerpc / boot / dts / fsl / gef_sbc610.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * GE SBC610 Device Tree Source
4  *
5  * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
6  *
7  * Based on: SBS CM6 Device Tree Source
8  * Copyright 2007 SBS Technologies GmbH & Co. KG
9  * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
10  * Copyright 2006 Freescale Semiconductor Inc.
11  */
12
13 /*
14  * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
15  */
16
17 /include/ "mpc8641si-pre.dtsi"
18
19 / {
20         model = "GEF_SBC610";
21         compatible = "gef,sbc610";
22
23         memory {
24                 device_type = "memory";
25                 reg = <0x0 0x40000000>; // set by uboot
26         };
27
28         lbc: localbus@fef05000 {
29                 reg = <0xfef05000 0x1000>;
30
31                 ranges = <0 0 0xff000000 0x01000000     // 16MB Boot flash
32                           1 0 0xe8000000 0x08000000     // Paged Flash 0
33                           2 0 0xe0000000 0x08000000     // Paged Flash 1
34                           3 0 0xfc100000 0x00020000     // NVRAM
35                           4 0 0xfc000000 0x00008000     // FPGA
36                           5 0 0xfc008000 0x00008000     // AFIX FPGA
37                           6 0 0xfd000000 0x00800000     // IO FPGA (8-bit)
38                           7 0 0xfd800000 0x00800000>;   // IO FPGA (32-bit)
39
40                 /* flash@0,0 is a mirror of part of the memory in flash@1,0
41                 flash@0,0 {
42                         compatible = "gef,sbc610-firmware-mirror", "cfi-flash";
43                         reg = <0x0 0x0 0x1000000>;
44                         bank-width = <4>;
45                         device-width = <2>;
46                         #address-cells = <1>;
47                         #size-cells = <1>;
48                         partition@0 {
49                                 label = "firmware";
50                                 reg = <0x0 0x1000000>;
51                                 read-only;
52                         };
53                 };
54                 */
55
56                 flash@1,0 {
57                         compatible = "gef,sbc610-paged-flash", "cfi-flash";
58                         reg = <0x1 0x0 0x8000000>;
59                         bank-width = <4>;
60                         device-width = <2>;
61                         #address-cells = <1>;
62                         #size-cells = <1>;
63                         partition@0 {
64                                 label = "user";
65                                 reg = <0x0 0x7800000>;
66                         };
67                         partition@7800000 {
68                                 label = "firmware";
69                                 reg = <0x7800000 0x800000>;
70                                 read-only;
71                         };
72                 };
73
74                 nvram@3,0 {
75                         device_type = "nvram";
76                         compatible = "simtek,stk14ca8";
77                         reg = <0x3 0x0 0x20000>;
78                 };
79
80                 fpga@4,0 {
81                         compatible = "gef,fpga-regs";
82                         reg = <0x4 0x0 0x40>;
83                 };
84
85                 wdt@4,2000 {
86                         compatible = "gef,fpga-wdt";
87                         reg = <0x4 0x2000 0x8>;
88                         interrupts = <0x1a 0x4>;
89                         interrupt-parent = <&gef_pic>;
90                 };
91                 /* Second watchdog available, driver currently supports one.
92                 wdt@4,2010 {
93                         compatible = "gef,fpga-wdt";
94                         reg = <0x4 0x2010 0x8>;
95                         interrupts = <0x1b 0x4>;
96                         interrupt-parent = <&gef_pic>;
97                 };
98                 */
99                 gef_pic: pic@4,4000 {
100                         #interrupt-cells = <1>;
101                         interrupt-controller;
102                         compatible = "gef,fpga-pic";
103                         reg = <0x4 0x4000 0x20>;
104                         interrupts = <0x8 0x9 0 0>;
105
106                 };
107                 gef_gpio: gpio@7,14000 {
108                         #gpio-cells = <2>;
109                         compatible = "gef,sbc610-gpio";
110                         reg = <0x7 0x14000 0x24>;
111                         gpio-controller;
112                 };
113         };
114
115         soc: soc@fef00000 {
116                 ranges = <0x0 0xfef00000 0x00100000>;
117
118                 i2c@3000 {
119                         hwmon@48 {
120                                 compatible = "national,lm92";
121                                 reg = <0x48>;
122                         };
123
124                         hwmon@4c {
125                                 compatible = "adi,adt7461";
126                                 reg = <0x4c>;
127                         };
128
129                         rtc@51 {
130                                 compatible = "epson,rx8581";
131                                 reg = <0x00000051>;
132                         };
133
134                         eti@6b {
135                                 compatible = "dallas,ds1682";
136                                 reg = <0x6b>;
137                         };
138                 };
139
140                 enet0: ethernet@24000 {
141                         tbi-handle = <&tbi0>;
142                         phy-handle = <&phy0>;
143                         phy-connection-type = "gmii";
144                 };
145
146                 mdio@24520 {
147                         phy0: ethernet-phy@0 {
148                                 interrupt-parent = <&gef_pic>;
149                                 interrupts = <0x9 0x4>;
150                                 reg = <1>;
151                         };
152                         phy2: ethernet-phy@2 {
153                                 interrupt-parent = <&gef_pic>;
154                                 interrupts = <0x8 0x4>;
155                                 reg = <3>;
156                         };
157                         tbi0: tbi-phy@11 {
158                                 reg = <0x11>;
159                                 device_type = "tbi-phy";
160                         };
161                 };
162
163                 enet1: ethernet@26000 {
164                         tbi-handle = <&tbi2>;
165                         phy-handle = <&phy2>;
166                         phy-connection-type = "gmii";
167                 };
168
169                 mdio@26520 {
170                         tbi2: tbi-phy@11 {
171                                 reg = <0x11>;
172                                 device_type = "tbi-phy";
173                         };
174                 };
175
176                 enet2: ethernet@25000 {
177                         status = "disabled";
178                 };
179
180                 mdio@25520 {
181                         status = "disabled";
182                 };
183
184                 enet3: ethernet@27000 {
185                         status = "disabled";
186                 };
187
188                 mdio@27520 {
189                         status = "disabled";
190                 };
191         };
192
193         pci0: pcie@fef08000 {
194                 reg = <0xfef08000 0x1000>;
195                 ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
196                           0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
197
198                 pcie@0 {
199                         ranges = <0x02000000 0x0 0x80000000
200                                   0x02000000 0x0 0x80000000
201                                   0x0 0x40000000
202
203                                   0x01000000 0x0 0x00000000
204                                   0x01000000 0x0 0x00000000
205                                   0x0 0x00400000>;
206                 };
207         };
208
209         pci1: pcie@fef09000 {
210                 status = "disabled";
211         };
212 };
213
214 /include/ "mpc8641si-post.dtsi"