fdomain_cs: Sort out modules with duplicate description
[sfrench/cifs-2.6.git] / arch / parisc / include / asm / system.h
1 #ifndef __PARISC_SYSTEM_H
2 #define __PARISC_SYSTEM_H
3
4 #include <asm/psw.h>
5
6 /* The program status word as bitfields.  */
7 struct pa_psw {
8         unsigned int y:1;
9         unsigned int z:1;
10         unsigned int rv:2;
11         unsigned int w:1;
12         unsigned int e:1;
13         unsigned int s:1;
14         unsigned int t:1;
15
16         unsigned int h:1;
17         unsigned int l:1;
18         unsigned int n:1;
19         unsigned int x:1;
20         unsigned int b:1;
21         unsigned int c:1;
22         unsigned int v:1;
23         unsigned int m:1;
24
25         unsigned int cb:8;
26
27         unsigned int o:1;
28         unsigned int g:1;
29         unsigned int f:1;
30         unsigned int r:1;
31         unsigned int q:1;
32         unsigned int p:1;
33         unsigned int d:1;
34         unsigned int i:1;
35 };
36
37 #ifdef CONFIG_64BIT
38 #define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW + 4))
39 #else
40 #define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW))
41 #endif
42
43 struct task_struct;
44
45 extern struct task_struct *_switch_to(struct task_struct *, struct task_struct *);
46
47 #define switch_to(prev, next, last) do {                        \
48         (last) = _switch_to(prev, next);                        \
49 } while(0)
50
51 /* interrupt control */
52 #define local_save_flags(x)     __asm__ __volatile__("ssm 0, %0" : "=r" (x) : : "memory")
53 #define local_irq_disable()     __asm__ __volatile__("rsm %0,%%r0\n" : : "i" (PSW_I) : "memory" )
54 #define local_irq_enable()      __asm__ __volatile__("ssm %0,%%r0\n" : : "i" (PSW_I) : "memory" )
55
56 #define local_irq_save(x) \
57         __asm__ __volatile__("rsm %1,%0" : "=r" (x) :"i" (PSW_I) : "memory" )
58 #define local_irq_restore(x) \
59         __asm__ __volatile__("mtsm %0" : : "r" (x) : "memory" )
60
61 #define irqs_disabled()                 \
62 ({                                      \
63         unsigned long flags;            \
64         local_save_flags(flags);        \
65         (flags & PSW_I) == 0;           \
66 })
67
68 #define mfctl(reg)      ({              \
69         unsigned long cr;               \
70         __asm__ __volatile__(           \
71                 "mfctl " #reg ",%0" :   \
72                  "=r" (cr)              \
73         );                              \
74         cr;                             \
75 })
76
77 #define mtctl(gr, cr) \
78         __asm__ __volatile__("mtctl %0,%1" \
79                 : /* no outputs */ \
80                 : "r" (gr), "i" (cr) : "memory")
81
82 /* these are here to de-mystefy the calling code, and to provide hooks */
83 /* which I needed for debugging EIEM problems -PB */
84 #define get_eiem() mfctl(15)
85 static inline void set_eiem(unsigned long val)
86 {
87         mtctl(val, 15);
88 }
89
90 #define mfsp(reg)       ({              \
91         unsigned long cr;               \
92         __asm__ __volatile__(           \
93                 "mfsp " #reg ",%0" :    \
94                  "=r" (cr)              \
95         );                              \
96         cr;                             \
97 })
98
99 #define mtsp(gr, cr) \
100         __asm__ __volatile__("mtsp %0,%1" \
101                 : /* no outputs */ \
102                 : "r" (gr), "i" (cr) : "memory")
103
104
105 /*
106 ** This is simply the barrier() macro from linux/kernel.h but when serial.c
107 ** uses tqueue.h uses smp_mb() defined using barrier(), linux/kernel.h
108 ** hasn't yet been included yet so it fails, thus repeating the macro here.
109 **
110 ** PA-RISC architecture allows for weakly ordered memory accesses although
111 ** none of the processors use it. There is a strong ordered bit that is
112 ** set in the O-bit of the page directory entry. Operating systems that
113 ** can not tolerate out of order accesses should set this bit when mapping
114 ** pages. The O-bit of the PSW should also be set to 1 (I don't believe any
115 ** of the processor implemented the PSW O-bit). The PCX-W ERS states that
116 ** the TLB O-bit is not implemented so the page directory does not need to
117 ** have the O-bit set when mapping pages (section 3.1). This section also
118 ** states that the PSW Y, Z, G, and O bits are not implemented.
119 ** So it looks like nothing needs to be done for parisc-linux (yet).
120 ** (thanks to chada for the above comment -ggg)
121 **
122 ** The __asm__ op below simple prevents gcc/ld from reordering
123 ** instructions across the mb() "call".
124 */
125 #define mb()            __asm__ __volatile__("":::"memory")     /* barrier() */
126 #define rmb()           mb()
127 #define wmb()           mb()
128 #define smp_mb()        mb()
129 #define smp_rmb()       mb()
130 #define smp_wmb()       mb()
131 #define smp_read_barrier_depends()      do { } while(0)
132 #define read_barrier_depends()          do { } while(0)
133
134 #define set_mb(var, value)              do { var = value; mb(); } while (0)
135
136 #ifndef CONFIG_PA20
137 /* Because kmalloc only guarantees 8-byte alignment for kmalloc'd data,
138    and GCC only guarantees 8-byte alignment for stack locals, we can't
139    be assured of 16-byte alignment for atomic lock data even if we
140    specify "__attribute ((aligned(16)))" in the type declaration.  So,
141    we use a struct containing an array of four ints for the atomic lock
142    type and dynamically select the 16-byte aligned int from the array
143    for the semaphore.  */
144
145 #define __PA_LDCW_ALIGNMENT     16
146 #define __ldcw_align(a) ({                                      \
147         unsigned long __ret = (unsigned long) &(a)->lock[0];    \
148         __ret = (__ret + __PA_LDCW_ALIGNMENT - 1)               \
149                 & ~(__PA_LDCW_ALIGNMENT - 1);                   \
150         (volatile unsigned int *) __ret;                        \
151 })
152 #define __LDCW  "ldcw"
153
154 #else /*CONFIG_PA20*/
155 /* From: "Jim Hull" <jim.hull of hp.com>
156    I've attached a summary of the change, but basically, for PA 2.0, as
157    long as the ",CO" (coherent operation) completer is specified, then the
158    16-byte alignment requirement for ldcw and ldcd is relaxed, and instead
159    they only require "natural" alignment (4-byte for ldcw, 8-byte for
160    ldcd). */
161
162 #define __PA_LDCW_ALIGNMENT     4
163 #define __ldcw_align(a) ((volatile unsigned int *)a)
164 #define __LDCW  "ldcw,co"
165
166 #endif /*!CONFIG_PA20*/
167
168 /* LDCW, the only atomic read-write operation PA-RISC has. *sigh*.  */
169 #define __ldcw(a) ({                                            \
170         unsigned __ret;                                         \
171         __asm__ __volatile__(__LDCW " 0(%1),%0"                 \
172                 : "=r" (__ret) : "r" (a));                      \
173         __ret;                                                  \
174 })
175
176 #ifdef CONFIG_SMP
177 # define __lock_aligned __attribute__((__section__(".data.lock_aligned")))
178 #endif
179
180 #define arch_align_stack(x) (x)
181
182 #endif