usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers
[sfrench/cifs-2.6.git] / arch / mips / sgi-ip27 / ip27-berr.c
1 /*
2  * This file is subject to the terms and conditions of the GNU General Public
3  * License.  See the file "COPYING" in the main directory of this archive
4  * for more details.
5  *
6  * Copyright (C) 1994, 1995, 1996, 1999, 2000 by Ralf Baechle
7  * Copyright (C) 1999, 2000 by Silicon Graphics
8  * Copyright (C) 2002  Maciej W. Rozycki
9  */
10 #include <linux/init.h>
11 #include <linux/kernel.h>
12 #include <linux/signal.h>       /* for SIGBUS */
13 #include <linux/sched.h>        /* schow_regs(), force_sig() */
14 #include <linux/sched/debug.h>
15
16 #include <asm/sn/addrs.h>
17 #include <asm/sn/arch.h>
18 #include <asm/sn/sn0/hub.h>
19 #include <asm/tlbdebug.h>
20 #include <asm/traps.h>
21 #include <linux/uaccess.h>
22
23 static void dump_hub_information(unsigned long errst0, unsigned long errst1)
24 {
25         static char *err_type[2][8] = {
26                 { NULL, "Uncached Partial Read PRERR", "DERR", "Read Timeout",
27                   NULL, NULL, NULL, NULL },
28                 { "WERR", "Uncached Partial Write", "PWERR", "Write Timeout",
29                   NULL, NULL, NULL, NULL }
30         };
31         int wrb = errst1 & PI_ERR_ST1_WRBRRB_MASK;
32
33         if (!(errst0 & PI_ERR_ST0_VALID_MASK)) {
34                 printk("Hub does not contain valid error information\n");
35                 return;
36         }
37
38
39         printk("Hub has valid error information:\n");
40         if (errst0 & PI_ERR_ST0_OVERRUN_MASK)
41                 printk("Overrun is set.  Error stack may contain additional "
42                        "information.\n");
43         printk("Hub error address is %08lx\n",
44                (errst0 & PI_ERR_ST0_ADDR_MASK) >> (PI_ERR_ST0_ADDR_SHFT - 3));
45         printk("Incoming message command 0x%lx\n",
46                (errst0 & PI_ERR_ST0_CMD_MASK) >> PI_ERR_ST0_CMD_SHFT);
47         printk("Supplemental field of incoming message is 0x%lx\n",
48                (errst0 & PI_ERR_ST0_SUPPL_MASK) >> PI_ERR_ST0_SUPPL_SHFT);
49         printk("T5 Rn (for RRB only) is 0x%lx\n",
50                (errst0 & PI_ERR_ST0_REQNUM_MASK) >> PI_ERR_ST0_REQNUM_SHFT);
51         printk("Error type is %s\n", err_type[wrb]
52                [(errst0 & PI_ERR_ST0_TYPE_MASK) >> PI_ERR_ST0_TYPE_SHFT]
53                 ? : "invalid");
54 }
55
56 int ip27_be_handler(struct pt_regs *regs, int is_fixup)
57 {
58         unsigned long errst0, errst1;
59         int data = regs->cp0_cause & 4;
60         int cpu = LOCAL_HUB_L(PI_CPU_NUM);
61
62         if (is_fixup)
63                 return MIPS_BE_FIXUP;
64
65         printk("Slice %c got %cbe at 0x%lx\n", 'A' + cpu, data ? 'd' : 'i',
66                regs->cp0_epc);
67         printk("Hub information:\n");
68         printk("ERR_INT_PEND = 0x%06llx\n", LOCAL_HUB_L(PI_ERR_INT_PEND));
69         errst0 = LOCAL_HUB_L(cpu ? PI_ERR_STATUS0_B : PI_ERR_STATUS0_A);
70         errst1 = LOCAL_HUB_L(cpu ? PI_ERR_STATUS1_B : PI_ERR_STATUS1_A);
71         dump_hub_information(errst0, errst1);
72         show_regs(regs);
73         dump_tlb_all();
74         while(1);
75         force_sig(SIGBUS, current);
76 }
77
78 void __init ip27_be_init(void)
79 {
80         /* XXX Initialize all the Hub & Bridge error handling here.  */
81         int cpu = LOCAL_HUB_L(PI_CPU_NUM);
82         int cpuoff = cpu << 8;
83
84         board_be_handler = ip27_be_handler;
85
86         LOCAL_HUB_S(PI_ERR_INT_PEND,
87                     cpu ? PI_ERR_CLEAR_ALL_B : PI_ERR_CLEAR_ALL_A);
88         LOCAL_HUB_S(PI_ERR_INT_MASK_A + cpuoff, 0);
89         LOCAL_HUB_S(PI_ERR_STACK_ADDR_A + cpuoff, 0);
90         LOCAL_HUB_S(PI_ERR_STACK_SIZE, 0);      /* Disable error stack */
91         LOCAL_HUB_S(PI_SYSAD_ERRCHK_EN, PI_SYSAD_CHECK_ALL);
92 }