arch/mips/kernel/csrc-sb1250.c

   1 /*
   2  * Copyright (C) 2000, 2001 Broadcom Corporation
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * as published by the Free Software Foundation; either version 2
   7  * of the License, or (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software
  16  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  17  */
  18 #include <linux/clocksource.h>
  19
  20 #include <asm/addrspace.h>
  21 #include <asm/io.h>
  22 #include <asm/time.h>
  23
  24 #include <asm/sibyte/sb1250.h>
  25 #include <asm/sibyte/sb1250_regs.h>
  26 #include <asm/sibyte/sb1250_int.h>
  27 #include <asm/sibyte/sb1250_scd.h>
  28
  29 #define SB1250_HPT_NUM          3
  30 #define SB1250_HPT_VALUE        M_SCD_TIMER_CNT /* max value */
  31
  32 /*
  33  * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
  34  * again.
  35  */
  36 static cycle_t sb1250_hpt_read(struct clocksource *cs)
  37 {
  38         unsigned int count;
  39
  40         count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
  41
  42         return SB1250_HPT_VALUE - count;
  43 }
  44
  45 struct clocksource bcm1250_clocksource = {
  46         .name   = "bcm1250-counter-3",
  47         .rating = 200,
  48         .read   = sb1250_hpt_read,
  49         .mask   = CLOCKSOURCE_MASK(23),
  50         .flags  = CLOCK_SOURCE_IS_CONTINUOUS,
  51 };
  52
  53 void __init sb1250_clocksource_init(void)
  54 {
  55         struct clocksource *cs = &bcm1250_clocksource;
  56
  57         /* Setup hpt using timer #3 but do not enable irq for it */
  58         __raw_writeq(0,
  59                      IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
  60                                                  R_SCD_TIMER_CFG)));
  61         __raw_writeq(SB1250_HPT_VALUE,
  62                      IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
  63                                                  R_SCD_TIMER_INIT)));
  64         __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
  65                      IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
  66                                                  R_SCD_TIMER_CFG)));
  67
  68         clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
  69         clocksource_register(cs);
  70 }