ALSA: hda - Add missing terminating entry to SND_HDA_PIN_QUIRK macro
[sfrench/cifs-2.6.git] / arch / mips / boot / dts / easy50712.dts
1 /dts-v1/;
2
3 /include/ "danube.dtsi"
4
5 / {
6         chosen {
7                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
8         };
9
10         memory@0 {
11                 device_type = "memory";
12                 reg = <0x0 0x2000000>;
13         };
14
15         fpi@10000000 {
16                 #address-cells = <1>;
17                 #size-cells = <1>;
18                 localbus@0 {
19                         #address-cells = <2>;
20                         #size-cells = <1>;
21                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
22                                 1 0 0x4000000 0x4000010>; /* addsel1 */
23                         compatible = "lantiq,localbus", "simple-bus";
24
25                         nor-boot@0 {
26                                 compatible = "lantiq,nor";
27                                 bank-width = <2>;
28                                 reg = <0 0x0 0x2000000>;
29                                 #address-cells = <1>;
30                                 #size-cells = <1>;
31
32                                 partition@0 {
33                                         label = "uboot";
34                                         reg = <0x00000 0x10000>; /* 64 KB */
35                                 };
36
37                                 partition@10000 {
38                                         label = "uboot_env";
39                                         reg = <0x10000 0x10000>; /* 64 KB */
40                                 };
41
42                                 partition@20000 {
43                                         label = "linux";
44                                         reg = <0x20000 0x3d0000>;
45                                 };
46
47                                 partition@400000 {
48                                         label = "rootfs";
49                                         reg = <0x400000 0x400000>;
50                                 };
51                         };
52                 };
53
54                 gpio: pinmux@E100B10 {
55                         compatible = "lantiq,pinctrl-xway";
56                         pinctrl-names = "default";
57                         pinctrl-0 = <&state_default>;
58
59                         #gpio-cells = <2>;
60                         gpio-controller;
61                         reg = <0xE100B10 0xA0>;
62
63                         state_default: pinmux {
64                                 stp {
65                                         lantiq,groups = "stp";
66                                         lantiq,function = "stp";
67                                 };
68                                 exin {
69                                         lantiq,groups = "exin1";
70                                         lantiq,function = "exin";
71                                 };
72                                 pci {
73                                         lantiq,groups = "gnt1";
74                                         lantiq,function = "pci";
75                                 };
76                                 conf_out {
77                                         lantiq,pins = "io4", "io5", "io6"; /* stp */
78                                         lantiq,open-drain;
79                                         lantiq,pull = <0>;
80                                 };
81                         };
82                 };
83
84                 etop@E180000 {
85                         compatible = "lantiq,etop-xway";
86                         reg = <0xE180000 0x40000>;
87                         interrupt-parent = <&icu0>;
88                         interrupts = <73 78>;
89                         phy-mode = "rmii";
90                         mac-address = [ 00 11 22 33 44 55 ];
91                 };
92
93                 stp0: stp@E100BB0 {
94                         #gpio-cells = <2>;
95                         compatible = "lantiq,gpio-stp-xway";
96                         gpio-controller;
97                         reg = <0xE100BB0 0x40>;
98
99                         lantiq,shadow = <0xfff>;
100                         lantiq,groups = <0x3>;
101                 };
102
103                 pci@E105400 {
104                         lantiq,bus-clock = <33333333>;
105                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
106                         interrupt-map = <
107                                 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
108                         >;
109                         gpios-reset = <&gpio 21 0>;
110                         req-mask = <0x1>;               /* GNT1 */
111                 };
112
113         };
114 };