arch/mips/ar7/platform.c

   1 /*
   2  * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
   3  * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2 of the License, or
   8  * (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  18  */
  19
  20 #include <linux/init.h>
  21 #include <linux/types.h>
  22 #include <linux/module.h>
  23 #include <linux/delay.h>
  24 #include <linux/dma-mapping.h>
  25 #include <linux/platform_device.h>
  26 #include <linux/mtd/physmap.h>
  27 #include <linux/serial.h>
  28 #include <linux/serial_8250.h>
  29 #include <linux/ioport.h>
  30 #include <linux/io.h>
  31 #include <linux/vlynq.h>
  32 #include <linux/leds.h>
  33 #include <linux/string.h>
  34 #include <linux/etherdevice.h>
  35 #include <linux/phy.h>
  36 #include <linux/phy_fixed.h>
  37 #include <linux/gpio.h>
  38 #include <linux/clk.h>
  39
  40 #include <asm/addrspace.h>
  41 #include <asm/mach-ar7/ar7.h>
  42 #include <asm/mach-ar7/gpio.h>
  43 #include <asm/mach-ar7/prom.h>
  44
  45 /*****************************************************************************
  46  * VLYNQ Bus
  47  ****************************************************************************/
  48 struct plat_vlynq_data {
  49         struct plat_vlynq_ops ops;
  50         int gpio_bit;
  51         int reset_bit;
  52 };
  53
  54 static int vlynq_on(struct vlynq_device *dev)
  55 {
  56         int ret;
  57         struct plat_vlynq_data *pdata = dev->dev.platform_data;
  58
  59         ret = gpio_request(pdata->gpio_bit, "vlynq");
  60         if (ret)
  61                 goto out;
  62
  63         ar7_device_reset(pdata->reset_bit);
  64
  65         ret = ar7_gpio_disable(pdata->gpio_bit);
  66         if (ret)
  67                 goto out_enabled;
  68
  69         ret = ar7_gpio_enable(pdata->gpio_bit);
  70         if (ret)
  71                 goto out_enabled;
  72
  73         ret = gpio_direction_output(pdata->gpio_bit, 0);
  74         if (ret)
  75                 goto out_gpio_enabled;
  76
  77         msleep(50);
  78
  79         gpio_set_value(pdata->gpio_bit, 1);
  80
  81         msleep(50);
  82
  83         return 0;
  84
  85 out_gpio_enabled:
  86         ar7_gpio_disable(pdata->gpio_bit);
  87 out_enabled:
  88         ar7_device_disable(pdata->reset_bit);
  89         gpio_free(pdata->gpio_bit);
  90 out:
  91         return ret;
  92 }
  93
  94 static void vlynq_off(struct vlynq_device *dev)
  95 {
  96         struct plat_vlynq_data *pdata = dev->dev.platform_data;
  97
  98         ar7_gpio_disable(pdata->gpio_bit);
  99         gpio_free(pdata->gpio_bit);
 100         ar7_device_disable(pdata->reset_bit);
 101 }
 102
 103 static struct resource vlynq_low_res[] = {
 104         {
 105                 .name   = "regs",
 106                 .flags  = IORESOURCE_MEM,
 107                 .start  = AR7_REGS_VLYNQ0,
 108                 .end    = AR7_REGS_VLYNQ0 + 0xff,
 109         },
 110         {
 111                 .name   = "irq",
 112                 .flags  = IORESOURCE_IRQ,
 113                 .start  = 29,
 114                 .end    = 29,
 115         },
 116         {
 117                 .name   = "mem",
 118                 .flags  = IORESOURCE_MEM,
 119                 .start  = 0x04000000,
 120                 .end    = 0x04ffffff,
 121         },
 122         {
 123                 .name   = "devirq",
 124                 .flags  = IORESOURCE_IRQ,
 125                 .start  = 80,
 126                 .end    = 111,
 127         },
 128 };
 129
 130 static struct resource vlynq_high_res[] = {
 131         {
 132                 .name   = "regs",
 133                 .flags  = IORESOURCE_MEM,
 134                 .start  = AR7_REGS_VLYNQ1,
 135                 .end    = AR7_REGS_VLYNQ1 + 0xff,
 136         },
 137         {
 138                 .name   = "irq",
 139                 .flags  = IORESOURCE_IRQ,
 140                 .start  = 33,
 141                 .end    = 33,
 142         },
 143         {
 144                 .name   = "mem",
 145                 .flags  = IORESOURCE_MEM,
 146                 .start  = 0x0c000000,
 147                 .end    = 0x0cffffff,
 148         },
 149         {
 150                 .name   = "devirq",
 151                 .flags  = IORESOURCE_IRQ,
 152                 .start  = 112,
 153                 .end    = 143,
 154         },
 155 };
 156
 157 static struct plat_vlynq_data vlynq_low_data = {
 158         .ops = {
 159                 .on     = vlynq_on,
 160                 .off    = vlynq_off,
 161         },
 162         .reset_bit      = 20,
 163         .gpio_bit       = 18,
 164 };
 165
 166 static struct plat_vlynq_data vlynq_high_data = {
 167         .ops = {
 168                 .on     = vlynq_on,
 169                 .off    = vlynq_off,
 170         },
 171         .reset_bit      = 16,
 172         .gpio_bit       = 19,
 173 };
 174
 175 static struct platform_device vlynq_low = {
 176         .id             = 0,
 177         .name           = "vlynq",
 178         .dev = {
 179                 .platform_data  = &vlynq_low_data,
 180         },
 181         .resource       = vlynq_low_res,
 182         .num_resources  = ARRAY_SIZE(vlynq_low_res),
 183 };
 184
 185 static struct platform_device vlynq_high = {
 186         .id             = 1,
 187         .name           = "vlynq",
 188         .dev = {
 189                 .platform_data  = &vlynq_high_data,
 190         },
 191         .resource       = vlynq_high_res,
 192         .num_resources  = ARRAY_SIZE(vlynq_high_res),
 193 };
 194
 195 /*****************************************************************************
 196  * Flash
 197  ****************************************************************************/
 198 static struct resource physmap_flash_resource = {
 199         .name   = "mem",
 200         .flags  = IORESOURCE_MEM,
 201         .start  = 0x10000000,
 202         .end    = 0x107fffff,
 203 };
 204
 205 static struct physmap_flash_data physmap_flash_data = {
 206         .width  = 2,
 207 };
 208
 209 static struct platform_device physmap_flash = {
 210         .name           = "physmap-flash",
 211         .dev = {
 212                 .platform_data  = &physmap_flash_data,
 213         },
 214         .resource       = &physmap_flash_resource,
 215         .num_resources  = 1,
 216 };
 217
 218 /*****************************************************************************
 219  * Ethernet
 220  ****************************************************************************/
 221 static struct resource cpmac_low_res[] = {
 222         {
 223                 .name   = "regs",
 224                 .flags  = IORESOURCE_MEM,
 225                 .start  = AR7_REGS_MAC0,
 226                 .end    = AR7_REGS_MAC0 + 0x7ff,
 227         },
 228         {
 229                 .name   = "irq",
 230                 .flags  = IORESOURCE_IRQ,
 231                 .start  = 27,
 232                 .end    = 27,
 233         },
 234 };
 235
 236 static struct resource cpmac_high_res[] = {
 237         {
 238                 .name   = "regs",
 239                 .flags  = IORESOURCE_MEM,
 240                 .start  = AR7_REGS_MAC1,
 241                 .end    = AR7_REGS_MAC1 + 0x7ff,
 242         },
 243         {
 244                 .name   = "irq",
 245                 .flags  = IORESOURCE_IRQ,
 246                 .start  = 41,
 247                 .end    = 41,
 248         },
 249 };
 250
 251 static struct fixed_phy_status fixed_phy_status __initdata = {
 252         .link           = 1,
 253         .speed          = 100,
 254         .duplex         = 1,
 255 };
 256
 257 static struct plat_cpmac_data cpmac_low_data = {
 258         .reset_bit      = 17,
 259         .power_bit      = 20,
 260         .phy_mask       = 0x80000000,
 261 };
 262
 263 static struct plat_cpmac_data cpmac_high_data = {
 264         .reset_bit      = 21,
 265         .power_bit      = 22,
 266         .phy_mask       = 0x7fffffff,
 267 };
 268
 269 static u64 cpmac_dma_mask = DMA_BIT_MASK(32);
 270
 271 static struct platform_device cpmac_low = {
 272         .id             = 0,
 273         .name           = "cpmac",
 274         .dev = {
 275                 .dma_mask               = &cpmac_dma_mask,
 276                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 277                 .platform_data          = &cpmac_low_data,
 278         },
 279         .resource       = cpmac_low_res,
 280         .num_resources  = ARRAY_SIZE(cpmac_low_res),
 281 };
 282
 283 static struct platform_device cpmac_high = {
 284         .id             = 1,
 285         .name           = "cpmac",
 286         .dev = {
 287                 .dma_mask               = &cpmac_dma_mask,
 288                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 289                 .platform_data          = &cpmac_high_data,
 290         },
 291         .resource       = cpmac_high_res,
 292         .num_resources  = ARRAY_SIZE(cpmac_high_res),
 293 };
 294
 295 static void __init cpmac_get_mac(int instance, unsigned char *dev_addr)
 296 {
 297         char name[5], *mac;
 298
 299         sprintf(name, "mac%c", 'a' + instance);
 300         mac = prom_getenv(name);
 301         if (!mac && instance) {
 302                 sprintf(name, "mac%c", 'a');
 303                 mac = prom_getenv(name);
 304         }
 305
 306         if (mac) {
 307                 if (sscanf(mac, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
 308                                         &dev_addr[0], &dev_addr[1],
 309                                         &dev_addr[2], &dev_addr[3],
 310                                         &dev_addr[4], &dev_addr[5]) != 6) {
 311                         pr_warning("cannot parse mac address, "
 312                                         "using random address\n");
 313                         random_ether_addr(dev_addr);
 314                 }
 315         } else
 316                 random_ether_addr(dev_addr);
 317 }
 318
 319 /*****************************************************************************
 320  * USB
 321  ****************************************************************************/
 322 static struct resource usb_res[] = {
 323         {
 324                 .name   = "regs",
 325                 .flags  = IORESOURCE_MEM,
 326                 .start  = AR7_REGS_USB,
 327                 .end    = AR7_REGS_USB + 0xff,
 328         },
 329         {
 330                 .name   = "irq",
 331                 .flags  = IORESOURCE_IRQ,
 332                 .start  = 32,
 333                 .end    = 32,
 334         },
 335         {
 336                 .name   = "mem",
 337                 .flags  = IORESOURCE_MEM,
 338                 .start  = 0x03400000,
 339                 .end    = 0x03401fff,
 340         },
 341 };
 342
 343 static struct platform_device ar7_udc = {
 344         .name           = "ar7_udc",
 345         .resource       = usb_res,
 346         .num_resources  = ARRAY_SIZE(usb_res),
 347 };
 348
 349 /*****************************************************************************
 350  * LEDs
 351  ****************************************************************************/
 352 static struct gpio_led default_leds[] = {
 353         {
 354                 .name                   = "status",
 355                 .gpio                   = 8,
 356                 .active_low             = 1,
 357         },
 358 };
 359
 360 static struct gpio_led dsl502t_leds[] = {
 361         {
 362                 .name                   = "status",
 363                 .gpio                   = 9,
 364                 .active_low             = 1,
 365         },
 366         {
 367                 .name                   = "ethernet",
 368                 .gpio                   = 7,
 369                 .active_low             = 1,
 370         },
 371         {
 372                 .name                   = "usb",
 373                 .gpio                   = 12,
 374                 .active_low             = 1,
 375         },
 376 };
 377
 378 static struct gpio_led dg834g_leds[] = {
 379         {
 380                 .name                   = "ppp",
 381                 .gpio                   = 6,
 382                 .active_low             = 1,
 383         },
 384         {
 385                 .name                   = "status",
 386                 .gpio                   = 7,
 387                 .active_low             = 1,
 388         },
 389         {
 390                 .name                   = "adsl",
 391                 .gpio                   = 8,
 392                 .active_low             = 1,
 393         },
 394         {
 395                 .name                   = "wifi",
 396                 .gpio                   = 12,
 397                 .active_low             = 1,
 398         },
 399         {
 400                 .name                   = "power",
 401                 .gpio                   = 14,
 402                 .active_low             = 1,
 403                 .default_trigger        = "default-on",
 404         },
 405 };
 406
 407 static struct gpio_led fb_sl_leds[] = {
 408         {
 409                 .name                   = "1",
 410                 .gpio                   = 7,
 411         },
 412         {
 413                 .name                   = "2",
 414                 .gpio                   = 13,
 415                 .active_low             = 1,
 416         },
 417         {
 418                 .name                   = "3",
 419                 .gpio                   = 10,
 420                 .active_low             = 1,
 421         },
 422         {
 423                 .name                   = "4",
 424                 .gpio                   = 12,
 425                 .active_low             = 1,
 426         },
 427         {
 428                 .name                   = "5",
 429                 .gpio                   = 9,
 430                 .active_low             = 1,
 431         },
 432 };
 433
 434 static struct gpio_led fb_fon_leds[] = {
 435         {
 436                 .name                   = "1",
 437                 .gpio                   = 8,
 438         },
 439         {
 440                 .name                   = "2",
 441                 .gpio                   = 3,
 442                 .active_low             = 1,
 443         },
 444         {
 445                 .name                   = "3",
 446                 .gpio                   = 5,
 447         },
 448         {
 449                 .name                   = "4",
 450                 .gpio                   = 4,
 451                 .active_low             = 1,
 452         },
 453         {
 454                 .name                   = "5",
 455                 .gpio                   = 11,
 456                 .active_low             = 1,
 457         },
 458 };
 459
 460 static struct gpio_led_platform_data ar7_led_data;
 461
 462 static struct platform_device ar7_gpio_leds = {
 463         .name = "leds-gpio",
 464         .dev = {
 465                 .platform_data = &ar7_led_data,
 466         }
 467 };
 468
 469 static void __init detect_leds(void)
 470 {
 471         char *prid, *usb_prod;
 472
 473         /* Default LEDs */
 474         ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
 475         ar7_led_data.leds = default_leds;
 476
 477         /* FIXME: the whole thing is unreliable */
 478         prid = prom_getenv("ProductID");
 479         usb_prod = prom_getenv("usb_prod");
 480
 481         /* If we can't get the product id from PROM, use the default LEDs */
 482         if (!prid)
 483                 return;
 484
 485         if (strstr(prid, "Fritz_Box_FON")) {
 486                 ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds);
 487                 ar7_led_data.leds = fb_fon_leds;
 488         } else if (strstr(prid, "Fritz_Box_")) {
 489                 ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds);
 490                 ar7_led_data.leds = fb_sl_leds;
 491         } else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB"))
 492                 && usb_prod != NULL && strstr(usb_prod, "DSL-502T")) {
 493                 ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds);
 494                 ar7_led_data.leds = dsl502t_leds;
 495         } else if (strstr(prid, "DG834")) {
 496                 ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
 497                 ar7_led_data.leds = dg834g_leds;
 498         }
 499 }
 500
 501 /*****************************************************************************
 502  * Watchdog
 503  ****************************************************************************/
 504 static struct resource ar7_wdt_res = {
 505         .name           = "regs",
 506         .flags          = IORESOURCE_MEM,
 507         .start          = -1,   /* Filled at runtime */
 508         .end            = -1,   /* Filled at runtime */
 509 };
 510
 511 static struct platform_device ar7_wdt = {
 512         .name           = "ar7_wdt",
 513         .resource       = &ar7_wdt_res,
 514         .num_resources  = 1,
 515 };
 516
 517 /*****************************************************************************
 518  * Init
 519  ****************************************************************************/
 520 static int __init ar7_register_uarts(void)
 521 {
 522 #ifdef CONFIG_SERIAL_8250
 523         static struct uart_port uart_port __initdata;
 524         struct clk *bus_clk;
 525         int res;
 526
 527         memset(&uart_port, 0, sizeof(struct uart_port));
 528
 529         bus_clk = clk_get(NULL, "bus");
 530         if (IS_ERR(bus_clk))
 531                 panic("unable to get bus clk\n");
 532
 533         uart_port.type          = PORT_AR7;
 534         uart_port.uartclk       = clk_get_rate(bus_clk) / 2;
 535         uart_port.iotype        = UPIO_MEM32;
 536         uart_port.regshift      = 2;
 537
 538         uart_port.line          = 0;
 539         uart_port.irq           = AR7_IRQ_UART0;
 540         uart_port.mapbase       = AR7_REGS_UART0;
 541         uart_port.membase       = ioremap(uart_port.mapbase, 256);
 542
 543         res = early_serial_setup(&uart_port);
 544         if (res)
 545                 return res;
 546
 547         /* Only TNETD73xx have a second serial port */
 548         if (ar7_has_second_uart()) {
 549                 uart_port.line          = 1;
 550                 uart_port.irq           = AR7_IRQ_UART1;
 551                 uart_port.mapbase       = UR8_REGS_UART1;
 552                 uart_port.membase       = ioremap(uart_port.mapbase, 256);
 553
 554                 res = early_serial_setup(&uart_port);
 555                 if (res)
 556                         return res;
 557         }
 558 #endif
 559
 560         return 0;
 561 }
 562
 563 static int __init ar7_register_devices(void)
 564 {
 565         void __iomem *bootcr;
 566         u32 val;
 567         int res;
 568
 569         res = ar7_register_uarts();
 570         if (res)
 571                 pr_err("unable to setup uart(s): %d\n", res);
 572
 573         res = platform_device_register(&physmap_flash);
 574         if (res)
 575                 pr_warning("unable to register physmap-flash: %d\n", res);
 576
 577         ar7_device_disable(vlynq_low_data.reset_bit);
 578         res = platform_device_register(&vlynq_low);
 579         if (res)
 580                 pr_warning("unable to register vlynq-low: %d\n", res);
 581
 582         if (ar7_has_high_vlynq()) {
 583                 ar7_device_disable(vlynq_high_data.reset_bit);
 584                 res = platform_device_register(&vlynq_high);
 585                 if (res)
 586                         pr_warning("unable to register vlynq-high: %d\n", res);
 587         }
 588
 589         if (ar7_has_high_cpmac()) {
 590                 res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
 591                 if (!res) {
 592                         cpmac_get_mac(1, cpmac_high_data.dev_addr);
 593
 594                         res = platform_device_register(&cpmac_high);
 595                         if (res)
 596                                 pr_warning("unable to register cpmac-high: %d\n", res);
 597                 } else
 598                         pr_warning("unable to add cpmac-high phy: %d\n", res);
 599         } else
 600                 cpmac_low_data.phy_mask = 0xffffffff;
 601
 602         res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
 603         if (!res) {
 604                 cpmac_get_mac(0, cpmac_low_data.dev_addr);
 605                 res = platform_device_register(&cpmac_low);
 606                 if (res)
 607                         pr_warning("unable to register cpmac-low: %d\n", res);
 608         } else
 609                 pr_warning("unable to add cpmac-low phy: %d\n", res);
 610
 611         detect_leds();
 612         res = platform_device_register(&ar7_gpio_leds);
 613         if (res)
 614                 pr_warning("unable to register leds: %d\n", res);
 615
 616         res = platform_device_register(&ar7_udc);
 617         if (res)
 618                 pr_warning("unable to register usb slave: %d\n", res);
 619
 620         /* Register watchdog only if enabled in hardware */
 621         bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
 622         val = readl(bootcr);
 623         iounmap(bootcr);
 624         if (val & AR7_WDT_HW_ENA) {
 625                 if (ar7_has_high_vlynq())
 626                         ar7_wdt_res.start = UR8_REGS_WDT;
 627                 else
 628                         ar7_wdt_res.start = AR7_REGS_WDT;
 629
 630                 ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
 631                 res = platform_device_register(&ar7_wdt);
 632                 if (res)
 633                         pr_warning("unable to register watchdog: %d\n", res);
 634         }
 635
 636         return 0;
 637 }
 638 device_initcall(ar7_register_devices);