Pull sbs into release branch
[sfrench/cifs-2.6.git] / arch / i386 / boot / main.c
1 /* -*- linux-c -*- ------------------------------------------------------- *
2  *
3  *   Copyright (C) 1991, 1992 Linus Torvalds
4  *   Copyright 2007 rPath, Inc. - All Rights Reserved
5  *
6  *   This file is part of the Linux kernel, and is made available under
7  *   the terms of the GNU General Public License version 2.
8  *
9  * ----------------------------------------------------------------------- */
10
11 /*
12  * arch/i386/boot/main.c
13  *
14  * Main module for the real-mode kernel code
15  */
16
17 #include "boot.h"
18
19 struct boot_params boot_params __attribute__((aligned(16)));
20
21 char *HEAP = _end;
22 char *heap_end = _end;          /* Default end of heap = no heap */
23
24 /*
25  * Copy the header into the boot parameter block.  Since this
26  * screws up the old-style command line protocol, adjust by
27  * filling in the new-style command line pointer instead.
28  */
29 #define OLD_CL_MAGIC    0xA33F
30 #define OLD_CL_ADDRESS  0x20
31
32 static void copy_boot_params(void)
33 {
34         struct old_cmdline {
35                 u16 cl_magic;
36                 u16 cl_offset;
37         };
38         const struct old_cmdline * const oldcmd =
39                 (const struct old_cmdline *)OLD_CL_ADDRESS;
40
41         BUILD_BUG_ON(sizeof boot_params != 4096);
42         memcpy(&boot_params.hdr, &hdr, sizeof hdr);
43
44         if (!boot_params.hdr.cmd_line_ptr &&
45             oldcmd->cl_magic == OLD_CL_MAGIC) {
46                 /* Old-style command line protocol. */
47                 u16 cmdline_seg;
48
49                 /* Figure out if the command line falls in the region
50                    of memory that an old kernel would have copied up
51                    to 0x90000... */
52                 if (oldcmd->cl_offset < boot_params.hdr.setup_move_size)
53                         cmdline_seg = ds();
54                 else
55                         cmdline_seg = 0x9000;
56
57                 boot_params.hdr.cmd_line_ptr =
58                         (cmdline_seg << 4) + oldcmd->cl_offset;
59         }
60 }
61
62 /*
63  * Set the keyboard repeat rate to maximum.  Unclear why this
64  * is done here; this might be possible to kill off as stale code.
65  */
66 static void keyboard_set_repeat(void)
67 {
68         u16 ax = 0x0305;
69         u16 bx = 0;
70         asm volatile("int $0x16"
71                      : "+a" (ax), "+b" (bx)
72                      : : "ecx", "edx", "esi", "edi");
73 }
74
75 /*
76  * Get Intel SpeedStep IST information.
77  */
78 static void query_speedstep_ist(void)
79 {
80         asm("int $0x15"
81             : "=a" (boot_params.speedstep_info[0]),
82               "=b" (boot_params.speedstep_info[1]),
83               "=c" (boot_params.speedstep_info[2]),
84               "=d" (boot_params.speedstep_info[3])
85             : "a" (0x0000e980),  /* IST Support */
86               "d" (0x47534943)); /* Request value */
87 }
88
89 /*
90  * Tell the BIOS what CPU mode we intend to run in.
91  */
92 static void set_bios_mode(void)
93 {
94 #ifdef CONFIG_X86_64
95         u32 eax, ebx;
96
97         eax = 0xec00;
98         ebx = 2;
99         asm volatile("int $0x15"
100                      : "+a" (eax), "+b" (ebx)
101                      : : "ecx", "edx", "esi", "edi");
102 #endif
103 }
104
105 void main(void)
106 {
107         /* First, copy the boot header into the "zeropage" */
108         copy_boot_params();
109
110         /* End of heap check */
111         if (boot_params.hdr.loadflags & CAN_USE_HEAP) {
112                 heap_end = (char *)(boot_params.hdr.heap_end_ptr
113                                     +0x200-STACK_SIZE);
114         } else {
115                 /* Boot protocol 2.00 only, no heap available */
116                 puts("WARNING: Ancient bootloader, some functionality "
117                      "may be limited!\n");
118         }
119
120         /* Make sure we have all the proper CPU support */
121         if (validate_cpu()) {
122                 puts("Unable to boot - please use a kernel appropriate "
123                      "for your CPU.\n");
124                 die();
125         }
126
127         /* Tell the BIOS what CPU mode we intend to run in. */
128         set_bios_mode();
129
130         /* Detect memory layout */
131         detect_memory();
132
133         /* Set keyboard repeat rate (why?) */
134         keyboard_set_repeat();
135
136         /* Set the video mode */
137         set_video();
138
139         /* Query MCA information */
140         query_mca();
141
142         /* Voyager */
143 #ifdef CONFIG_X86_VOYAGER
144         query_voyager();
145 #endif
146
147         /* Query SpeedStep IST information */
148         query_speedstep_ist();
149
150         /* Query APM information */
151 #if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
152         query_apm_bios();
153 #endif
154
155         /* Query EDD information */
156 #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
157         query_edd();
158 #endif
159         /* Do the last things and invoke protected mode */
160         go_to_protected_mode();
161 }