Merge tag 'md-3.7-fixes' of git://neil.brown.name/md
[sfrench/cifs-2.6.git] / arch / hexagon / kernel / time.c
1 /*
2  * Time related functions for Hexagon architecture
3  *
4  * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 and
8  * only version 2 as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
18  * 02110-1301, USA.
19  */
20
21 #include <linux/init.h>
22 #include <linux/clockchips.h>
23 #include <linux/clocksource.h>
24 #include <linux/interrupt.h>
25 #include <linux/err.h>
26 #include <linux/platform_device.h>
27 #include <linux/ioport.h>
28 #include <linux/of.h>
29 #include <linux/of_address.h>
30 #include <linux/of_irq.h>
31 #include <linux/module.h>
32
33 #include <asm/timer-regs.h>
34 #include <asm/hexagon_vm.h>
35
36 /*
37  * For the clocksource we need:
38  *      pcycle frequency (600MHz)
39  * For the loops_per_jiffy we need:
40  *      thread/cpu frequency (100MHz)
41  * And for the timer, we need:
42  *      sleep clock rate
43  */
44
45 cycles_t        pcycle_freq_mhz;
46 cycles_t        thread_freq_mhz;
47 cycles_t        sleep_clk_freq;
48
49 static struct resource rtos_timer_resources[] = {
50         {
51                 .start  = RTOS_TIMER_REGS_ADDR,
52                 .end    = RTOS_TIMER_REGS_ADDR+PAGE_SIZE-1,
53                 .flags  = IORESOURCE_MEM,
54         },
55 };
56
57 static struct platform_device rtos_timer_device = {
58         .name           = "rtos_timer",
59         .id             = -1,
60         .num_resources  = ARRAY_SIZE(rtos_timer_resources),
61         .resource       = rtos_timer_resources,
62 };
63
64 /*  A lot of this stuff should move into a platform specific section.  */
65 struct adsp_hw_timer_struct {
66         u32 match;   /*  Match value  */
67         u32 count;
68         u32 enable;  /*  [1] - CLR_ON_MATCH_EN, [0] - EN  */
69         u32 clear;   /*  one-shot register that clears the count  */
70 };
71
72 /*  Look for "TCX0" for related constants.  */
73 static __iomem struct adsp_hw_timer_struct *rtos_timer;
74
75 static cycle_t timer_get_cycles(struct clocksource *cs)
76 {
77         return (cycle_t) __vmgettime();
78 }
79
80 static struct clocksource hexagon_clocksource = {
81         .name           = "pcycles",
82         .rating         = 250,
83         .read           = timer_get_cycles,
84         .mask           = CLOCKSOURCE_MASK(64),
85         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
86 };
87
88 static int set_next_event(unsigned long delta, struct clock_event_device *evt)
89 {
90         /*  Assuming the timer will be disabled when we enter here.  */
91
92         iowrite32(1, &rtos_timer->clear);
93         iowrite32(0, &rtos_timer->clear);
94
95         iowrite32(delta, &rtos_timer->match);
96         iowrite32(1 << TIMER_ENABLE, &rtos_timer->enable);
97         return 0;
98 }
99
100 /*
101  * Sets the mode (periodic, shutdown, oneshot, etc) of a timer.
102  */
103 static void set_mode(enum clock_event_mode mode,
104         struct clock_event_device *evt)
105 {
106         switch (mode) {
107         case CLOCK_EVT_MODE_SHUTDOWN:
108                 /* XXX implement me */
109         default:
110                 break;
111         }
112 }
113
114 #ifdef CONFIG_SMP
115 /*  Broadcast mechanism  */
116 static void broadcast(const struct cpumask *mask)
117 {
118         send_ipi(mask, IPI_TIMER);
119 }
120 #endif
121
122 static struct clock_event_device hexagon_clockevent_dev = {
123         .name           = "clockevent",
124         .features       = CLOCK_EVT_FEAT_ONESHOT,
125         .rating         = 400,
126         .irq            = RTOS_TIMER_INT,
127         .set_next_event = set_next_event,
128         .set_mode       = set_mode,
129 #ifdef CONFIG_SMP
130         .broadcast      = broadcast,
131 #endif
132 };
133
134 #ifdef CONFIG_SMP
135 static DEFINE_PER_CPU(struct clock_event_device, clock_events);
136
137 void setup_percpu_clockdev(void)
138 {
139         int cpu = smp_processor_id();
140         struct clock_event_device *ce_dev = &hexagon_clockevent_dev;
141         struct clock_event_device *dummy_clock_dev =
142                 &per_cpu(clock_events, cpu);
143
144         memcpy(dummy_clock_dev, ce_dev, sizeof(*dummy_clock_dev));
145         INIT_LIST_HEAD(&dummy_clock_dev->list);
146
147         dummy_clock_dev->features = CLOCK_EVT_FEAT_DUMMY;
148         dummy_clock_dev->cpumask = cpumask_of(cpu);
149         dummy_clock_dev->mode = CLOCK_EVT_MODE_UNUSED;
150
151         clockevents_register_device(dummy_clock_dev);
152 }
153
154 /*  Called from smp.c for each CPU's timer ipi call  */
155 void ipi_timer(void)
156 {
157         int cpu = smp_processor_id();
158         struct clock_event_device *ce_dev = &per_cpu(clock_events, cpu);
159
160         ce_dev->event_handler(ce_dev);
161 }
162 #endif /* CONFIG_SMP */
163
164 static irqreturn_t timer_interrupt(int irq, void *devid)
165 {
166         struct clock_event_device *ce_dev = &hexagon_clockevent_dev;
167
168         iowrite32(0, &rtos_timer->enable);
169         ce_dev->event_handler(ce_dev);
170
171         return IRQ_HANDLED;
172 }
173
174 /*  This should also be pulled from devtree  */
175 static struct irqaction rtos_timer_intdesc = {
176         .handler = timer_interrupt,
177         .flags = IRQF_TIMER | IRQF_TRIGGER_RISING,
178         .name = "rtos_timer"
179 };
180
181 /*
182  * time_init_deferred - called by start_kernel to set up timer/clock source
183  *
184  * Install the IRQ handler for the clock, setup timers.
185  * This is done late, as that way, we can use ioremap().
186  *
187  * This runs just before the delay loop is calibrated, and
188  * is used for delay calibration.
189  */
190 void __init time_init_deferred(void)
191 {
192         struct resource *resource = NULL;
193         struct clock_event_device *ce_dev = &hexagon_clockevent_dev;
194         struct device_node *dn;
195         struct resource r;
196         int err;
197
198         ce_dev->cpumask = cpu_all_mask;
199
200         if (!resource)
201                 resource = rtos_timer_device.resource;
202
203         /*  ioremap here means this has to run later, after paging init  */
204         rtos_timer = ioremap(resource->start, resource_size(resource));
205
206         if (!rtos_timer) {
207                 release_mem_region(resource->start, resource_size(resource));
208         }
209         clocksource_register_khz(&hexagon_clocksource, pcycle_freq_mhz * 1000);
210
211         /*  Note: the sim generic RTOS clock is apparently really 18750Hz  */
212
213         /*
214          * Last arg is some guaranteed seconds for which the conversion will
215          * work without overflow.
216          */
217         clockevents_calc_mult_shift(ce_dev, sleep_clk_freq, 4);
218
219         ce_dev->max_delta_ns = clockevent_delta2ns(0x7fffffff, ce_dev);
220         ce_dev->min_delta_ns = clockevent_delta2ns(0xf, ce_dev);
221
222 #ifdef CONFIG_SMP
223         setup_percpu_clockdev();
224 #endif
225
226         clockevents_register_device(ce_dev);
227         setup_irq(ce_dev->irq, &rtos_timer_intdesc);
228 }
229
230 void __init time_init(void)
231 {
232         late_time_init = time_init_deferred;
233 }
234
235 /*
236  * This could become parametric or perhaps even computed at run-time,
237  * but for now we take the observed simulator jitter.
238  */
239 static long long fudgefactor = 350;  /* Maybe lower if kernel optimized. */
240
241 void __udelay(unsigned long usecs)
242 {
243         unsigned long long start = __vmgettime();
244         unsigned long long finish = (pcycle_freq_mhz * usecs) - fudgefactor;
245
246         while ((__vmgettime() - start) < finish)
247                 cpu_relax(); /*  not sure how this improves readability  */
248 }
249 EXPORT_SYMBOL(__udelay);