Merge branch 'akpm' (patches from Andrew)
[sfrench/cifs-2.6.git] / arch / csky / kernel / signal.c
1 // SPDX-License-Identifier: GPL-2.0
2 // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
3
4 #include <linux/sched.h>
5 #include <linux/mm.h>
6 #include <linux/kernel.h>
7 #include <linux/signal.h>
8 #include <linux/syscalls.h>
9 #include <linux/errno.h>
10 #include <linux/wait.h>
11 #include <linux/ptrace.h>
12 #include <linux/unistd.h>
13 #include <linux/stddef.h>
14 #include <linux/highuid.h>
15 #include <linux/personality.h>
16 #include <linux/tty.h>
17 #include <linux/binfmts.h>
18 #include <linux/tracehook.h>
19 #include <linux/freezer.h>
20 #include <linux/uaccess.h>
21
22 #include <asm/setup.h>
23 #include <asm/pgtable.h>
24 #include <asm/traps.h>
25 #include <asm/ucontext.h>
26 #include <asm/vdso.h>
27
28 #include <abi/regdef.h>
29
30 #ifdef CONFIG_CPU_HAS_FPU
31 #include <abi/fpu.h>
32
33 static int restore_fpu_state(struct sigcontext *sc)
34 {
35         int err = 0;
36         struct user_fp user_fp;
37
38         err = copy_from_user(&user_fp, &sc->sc_user_fp, sizeof(user_fp));
39
40         restore_from_user_fp(&user_fp);
41
42         return err;
43 }
44
45 static int save_fpu_state(struct sigcontext *sc)
46 {
47         struct user_fp user_fp;
48
49         save_to_user_fp(&user_fp);
50
51         return copy_to_user(&sc->sc_user_fp, &user_fp, sizeof(user_fp));
52 }
53 #else
54 static inline int restore_fpu_state(struct sigcontext *sc) { return 0; }
55 static inline int save_fpu_state(struct sigcontext *sc) { return 0; }
56 #endif
57
58 struct rt_sigframe {
59         int sig;
60         struct siginfo *pinfo;
61         void *puc;
62         struct siginfo info;
63         struct ucontext uc;
64 };
65
66 static int
67 restore_sigframe(struct pt_regs *regs,
68                  struct sigcontext *sc, int *pr2)
69 {
70         int err = 0;
71
72         /* Always make any pending restarted system calls return -EINTR */
73         current_thread_info()->task->restart_block.fn = do_no_restart_syscall;
74
75         err |= copy_from_user(regs, &sc->sc_pt_regs, sizeof(struct pt_regs));
76
77         err |= restore_fpu_state(sc);
78
79         *pr2 = regs->a0;
80         return err;
81 }
82
83 asmlinkage int
84 do_rt_sigreturn(void)
85 {
86         sigset_t set;
87         int a0;
88         struct pt_regs *regs = current_pt_regs();
89         struct rt_sigframe *frame = (struct rt_sigframe *)(regs->usp);
90
91         if (!access_ok(frame, sizeof(*frame)))
92                 goto badframe;
93         if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
94                 goto badframe;
95
96         sigdelsetmask(&set, (sigmask(SIGKILL) | sigmask(SIGSTOP)));
97         spin_lock_irq(&current->sighand->siglock);
98         current->blocked = set;
99         recalc_sigpending();
100         spin_unlock_irq(&current->sighand->siglock);
101
102         if (restore_sigframe(regs, &frame->uc.uc_mcontext, &a0))
103                 goto badframe;
104
105         return a0;
106
107 badframe:
108         force_sig(SIGSEGV, current);
109         return 0;
110 }
111
112 static int setup_sigframe(struct sigcontext *sc, struct pt_regs *regs)
113 {
114         int err = 0;
115
116         err |= copy_to_user(&sc->sc_pt_regs, regs, sizeof(struct pt_regs));
117         err |= save_fpu_state(sc);
118
119         return err;
120 }
121
122 static inline void *
123 get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
124 {
125         unsigned long usp;
126
127         /* Default to using normal stack.  */
128         usp = regs->usp;
129
130         /* This is the X/Open sanctioned signal stack switching.  */
131         if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(usp)) {
132                 if (!on_sig_stack(usp))
133                         usp = current->sas_ss_sp + current->sas_ss_size;
134         }
135         return (void *)((usp - frame_size) & -8UL);
136 }
137
138 static int
139 setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
140 {
141         struct rt_sigframe *frame;
142         int err = 0;
143
144         struct csky_vdso *vdso = current->mm->context.vdso;
145
146         frame = get_sigframe(&ksig->ka, regs, sizeof(*frame));
147         if (!frame)
148                 return 1;
149
150         err |= __put_user(ksig->sig, &frame->sig);
151         err |= __put_user(&frame->info, &frame->pinfo);
152         err |= __put_user(&frame->uc, &frame->puc);
153         err |= copy_siginfo_to_user(&frame->info, &ksig->info);
154
155         /* Create the ucontext.  */
156         err |= __put_user(0, &frame->uc.uc_flags);
157         err |= __put_user(0, &frame->uc.uc_link);
158         err |= __put_user((void *)current->sas_ss_sp,
159                         &frame->uc.uc_stack.ss_sp);
160         err |= __put_user(sas_ss_flags(regs->usp),
161                         &frame->uc.uc_stack.ss_flags);
162         err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
163         err |= setup_sigframe(&frame->uc.uc_mcontext, regs);
164         err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
165
166         if (err)
167                 goto give_sigsegv;
168
169         /* Set up registers for signal handler */
170         regs->usp = (unsigned long)frame;
171         regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
172         regs->lr = (unsigned long)vdso->rt_signal_retcode;
173
174 adjust_stack:
175         regs->a0 = ksig->sig; /* first arg is signo */
176         regs->a1 = (unsigned long)(&(frame->info));
177         regs->a2 = (unsigned long)(&(frame->uc));
178         return err;
179
180 give_sigsegv:
181         if (ksig->sig == SIGSEGV)
182                 ksig->ka.sa.sa_handler = SIG_DFL;
183         force_sig(SIGSEGV, current);
184         goto adjust_stack;
185 }
186
187 /*
188  * OK, we're invoking a handler
189  */
190 static int
191 handle_signal(struct ksignal *ksig, struct pt_regs *regs)
192 {
193         int ret;
194         sigset_t *oldset = sigmask_to_save();
195
196         /*
197          * set up the stack frame, regardless of SA_SIGINFO,
198          * and pass info anyway.
199          */
200         ret = setup_rt_frame(ksig, oldset, regs);
201
202         if (ret != 0) {
203                 force_sigsegv(ksig->sig, current);
204                 return ret;
205         }
206
207         /* Block the signal if we were successful. */
208         spin_lock_irq(&current->sighand->siglock);
209         sigorsets(&current->blocked, &current->blocked, &ksig->ka.sa.sa_mask);
210         if (!(ksig->ka.sa.sa_flags & SA_NODEFER))
211                 sigaddset(&current->blocked, ksig->sig);
212         recalc_sigpending();
213         spin_unlock_irq(&current->sighand->siglock);
214
215         return 0;
216 }
217
218 /*
219  * Note that 'init' is a special process: it doesn't get signals it doesn't
220  * want to handle. Thus you cannot kill init even with a SIGKILL even by
221  * mistake.
222  *
223  * Note that we go through the signals twice: once to check the signals
224  * that the kernel can handle, and then we build all the user-level signal
225  * handling stack-frames in one go after that.
226  */
227 static void do_signal(struct pt_regs *regs, int syscall)
228 {
229         unsigned int retval = 0, continue_addr = 0, restart_addr = 0;
230         struct ksignal ksig;
231
232         /*
233          * We want the common case to go fast, which
234          * is why we may in certain cases get here from
235          * kernel mode. Just return without doing anything
236          * if so.
237          */
238         if (!user_mode(regs))
239                 return;
240
241         current->thread.esp0 = (unsigned long)regs;
242
243         /*
244          * If we were from a system call, check for system call restarting...
245          */
246         if (syscall) {
247                 continue_addr = regs->pc;
248 #if defined(__CSKYABIV2__)
249                 restart_addr = continue_addr - 4;
250 #else
251                 restart_addr = continue_addr - 2;
252 #endif
253                 retval = regs->a0;
254
255                 /*
256                  * Prepare for system call restart.  We do this here so that a
257                  * debugger will see the already changed.
258                  */
259                 switch (retval) {
260                 case -ERESTARTNOHAND:
261                 case -ERESTARTSYS:
262                 case -ERESTARTNOINTR:
263                         regs->a0 = regs->orig_a0;
264                         regs->pc = restart_addr;
265                         break;
266                 case -ERESTART_RESTARTBLOCK:
267                         regs->a0 = -EINTR;
268                         break;
269                 }
270         }
271
272         if (try_to_freeze())
273                 goto no_signal;
274
275         /*
276          * Get the signal to deliver.  When running under ptrace, at this
277          * point the debugger may change all our registers ...
278          */
279         if (get_signal(&ksig)) {
280                 /*
281                  * Depending on the signal settings we may need to revert the
282                  * decision to restart the system call.  But skip this if a
283                  * debugger has chosen to restart at a different PC.
284                  */
285                 if (regs->pc == restart_addr) {
286                         if (retval == -ERESTARTNOHAND ||
287                             (retval == -ERESTARTSYS &&
288                              !(ksig.ka.sa.sa_flags & SA_RESTART))) {
289                                 regs->a0 = -EINTR;
290                                 regs->pc = continue_addr;
291                         }
292                 }
293
294                 /* Whee!  Actually deliver the signal.  */
295                 if (handle_signal(&ksig, regs) == 0) {
296                         /*
297                          * A signal was successfully delivered; the saved
298                          * sigmask will have been stored in the signal frame,
299                          * and will be restored by sigreturn, so we can simply
300                          * clear the TIF_RESTORE_SIGMASK flag.
301                          */
302                         if (test_thread_flag(TIF_RESTORE_SIGMASK))
303                                 clear_thread_flag(TIF_RESTORE_SIGMASK);
304                 }
305                 return;
306         }
307
308 no_signal:
309         if (syscall) {
310                 /*
311                  * Handle restarting a different system call.  As above,
312                  * if a debugger has chosen to restart at a different PC,
313                  * ignore the restart.
314                  */
315                 if (retval == -ERESTART_RESTARTBLOCK
316                                 && regs->pc == continue_addr) {
317 #if defined(__CSKYABIV2__)
318                         regs->regs[3] = __NR_restart_syscall;
319                         regs->pc -= 4;
320 #else
321                         regs->regs[9] = __NR_restart_syscall;
322                         regs->pc -= 2;
323 #endif
324                 }
325
326                 /*
327                  * If there's no signal to deliver, we just put the saved
328                  * sigmask back.
329                  */
330                 if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
331                         clear_thread_flag(TIF_RESTORE_SIGMASK);
332                         sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
333                 }
334         }
335 }
336
337 asmlinkage void
338 do_notify_resume(unsigned int thread_flags, struct pt_regs *regs, int syscall)
339 {
340         if (thread_flags & _TIF_SIGPENDING)
341                 do_signal(regs, syscall);
342
343         if (thread_flags & _TIF_NOTIFY_RESUME) {
344                 clear_thread_flag(TIF_NOTIFY_RESUME);
345                 tracehook_notify_resume(regs);
346         }
347 }