arch/blackfin/mach-common/pm.c

   1 /*
   2  * File:         arch/blackfin/mach-common/pm.c
   3  * Based on:     arm/mach-omap/pm.c
   4  * Author:       Cliff Brake <cbrake@accelent.com> Copyright (c) 2001
   5  *
   6  * Created:      2001
   7  * Description:  Blackfin power management
   8  *
   9  * Modified:     Nicolas Pitre - PXA250 support
  10  *                Copyright (c) 2002 Monta Vista Software, Inc.
  11  *               David Singleton - OMAP1510
  12  *                Copyright (c) 2002 Monta Vista Software, Inc.
  13  *               Dirk Behme <dirk.behme@de.bosch.com> - OMAP1510/1610
  14  *                Copyright 2004
  15  *               Copyright 2004-2008 Analog Devices Inc.
  16  *
  17  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  18  *
  19  * This program is free software; you can redistribute it and/or modify
  20  * it under the terms of the GNU General Public License as published by
  21  * the Free Software Foundation; either version 2 of the License, or
  22  * (at your option) any later version.
  23  *
  24  * This program is distributed in the hope that it will be useful,
  25  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  26  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  27  * GNU General Public License for more details.
  28  *
  29  * You should have received a copy of the GNU General Public License
  30  * along with this program; if not, see the file COPYING, or write
  31  * to the Free Software Foundation, Inc.,
  32  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  33  */
  34
  35 #include <linux/suspend.h>
  36 #include <linux/sched.h>
  37 #include <linux/proc_fs.h>
  38 #include <linux/io.h>
  39 #include <linux/irq.h>
  40
  41 #include <asm/dpmc.h>
  42 #include <asm/gpio.h>
  43
  44 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
  45 #define WAKEUP_TYPE     PM_WAKE_HIGH
  46 #endif
  47
  48 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_L
  49 #define WAKEUP_TYPE     PM_WAKE_LOW
  50 #endif
  51
  52 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_F
  53 #define WAKEUP_TYPE     PM_WAKE_FALLING
  54 #endif
  55
  56 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_R
  57 #define WAKEUP_TYPE     PM_WAKE_RISING
  58 #endif
  59
  60 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_B
  61 #define WAKEUP_TYPE     PM_WAKE_BOTH_EDGES
  62 #endif
  63
  64 void bfin_pm_suspend_standby_enter(void)
  65 {
  66 #ifdef CONFIG_PM_WAKEUP_BY_GPIO
  67         gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
  68 #endif
  69
  70         u32 flags;
  71
  72         local_irq_save(flags);
  73         bfin_pm_setup();
  74
  75 #ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
  76         sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
  77 #else
  78         sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
  79 #endif
  80
  81         bfin_pm_restore();
  82
  83 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
  84         bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
  85         bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
  86 # ifdef CONFIG_BF54x
  87         bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
  88 # endif
  89 #else
  90         bfin_write_SIC_IWR(IWR_ENABLE_ALL);
  91 #endif
  92
  93         local_irq_restore(flags);
  94 }
  95
  96 /*
  97  *      bfin_pm_valid - Tell the PM core that we only support the standby sleep
  98  *                      state
  99  *      @state:         suspend state we're checking.
 100  *
 101  */
 102 static int bfin_pm_valid(suspend_state_t state)
 103 {
 104         return (state == PM_SUSPEND_STANDBY);
 105 }
 106
 107 /*
 108  *      bfin_pm_enter - Actually enter a sleep state.
 109  *      @state:         State we're entering.
 110  *
 111  */
 112 static int bfin_pm_enter(suspend_state_t state)
 113 {
 114         switch (state) {
 115         case PM_SUSPEND_STANDBY:
 116                 bfin_pm_suspend_standby_enter();
 117                 break;
 118
 119         case PM_SUSPEND_MEM:
 120                 return -ENOTSUPP;
 121
 122         default:
 123                 return -EINVAL;
 124         }
 125
 126         return 0;
 127 }
 128
 129 struct platform_suspend_ops bfin_pm_ops = {
 130         .enter = bfin_pm_enter,
 131         .valid  = bfin_pm_valid,
 132 };
 133
 134 static int __init bfin_pm_init(void)
 135 {
 136         suspend_set_ops(&bfin_pm_ops);
 137         return 0;
 138 }
 139
 140 __initcall(bfin_pm_init);