arch/blackfin/mach-bf537/boards/stamp.c

   1 /*
   2  * File:         arch/blackfin/mach-bf537/boards/stamp.c
   3  * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
   4  * Author:       Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Created:
   7  * Description:
   8  *
   9  * Modified:
  10  *               Copyright 2005 National ICT Australia (NICTA)
  11  *               Copyright 2004-2006 Analog Devices Inc.
  12  *
  13  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, see the file COPYING, or write
  27  * to the Free Software Foundation, Inc.,
  28  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  29  */
  30
  31 #include <linux/device.h>
  32 #include <linux/kernel.h>
  33 #include <linux/platform_device.h>
  34 #include <linux/mtd/mtd.h>
  35 #include <linux/mtd/nand.h>
  36 #include <linux/mtd/partitions.h>
  37 #include <linux/mtd/plat-ram.h>
  38 #include <linux/mtd/physmap.h>
  39 #include <linux/spi/spi.h>
  40 #include <linux/spi/flash.h>
  41 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
  42 #include <linux/usb/isp1362.h>
  43 #endif
  44 #include <linux/ata_platform.h>
  45 #include <linux/irq.h>
  46 #include <linux/interrupt.h>
  47 #include <linux/i2c.h>
  48 #include <linux/usb/sl811.h>
  49 #include <linux/spi/mmc_spi.h>
  50 #include <asm/dma.h>
  51 #include <asm/bfin5xx_spi.h>
  52 #include <asm/reboot.h>
  53 #include <asm/portmux.h>
  54 #include <asm/dpmc.h>
  55
  56 /*
  57  * Name the Board for the /proc/cpuinfo
  58  */
  59 const char bfin_board_name[] = "ADI BF537-STAMP";
  60
  61 /*
  62  *  Driver needs to know address, irq and flag pin.
  63  */
  64
  65 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  66 #include <linux/usb/isp1760.h>
  67 static struct resource bfin_isp1760_resources[] = {
  68         [0] = {
  69                 .start  = 0x203C0000,
  70                 .end    = 0x203C0000 + 0x000fffff,
  71                 .flags  = IORESOURCE_MEM,
  72         },
  73         [1] = {
  74                 .start  = IRQ_PF7,
  75                 .end    = IRQ_PF7,
  76                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
  77         },
  78 };
  79
  80 static struct isp1760_platform_data isp1760_priv = {
  81         .is_isp1761 = 0,
  82         .bus_width_16 = 1,
  83         .port1_otg = 0,
  84         .analog_oc = 0,
  85         .dack_polarity_high = 0,
  86         .dreq_polarity_high = 0,
  87 };
  88
  89 static struct platform_device bfin_isp1760_device = {
  90         .name           = "isp1760-hcd",
  91         .id             = 0,
  92         .dev = {
  93                 .platform_data = &isp1760_priv,
  94         },
  95         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  96         .resource       = bfin_isp1760_resources,
  97 };
  98 #endif
  99
 100 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 101 #include <linux/input.h>
 102 #include <linux/gpio_keys.h>
 103
 104 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 105         {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
 106         {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"},
 107         {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"},
 108         {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"},
 109 };
 110
 111 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
 112         .buttons        = bfin_gpio_keys_table,
 113         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
 114 };
 115
 116 static struct platform_device bfin_device_gpiokeys = {
 117         .name      = "gpio-keys",
 118         .dev = {
 119                 .platform_data = &bfin_gpio_keys_data,
 120         },
 121 };
 122 #endif
 123
 124 static struct resource bfin_gpios_resources = {
 125         .start = 0,
 126         .end   = MAX_BLACKFIN_GPIOS - 1,
 127         .flags = IORESOURCE_IRQ,
 128 };
 129
 130 static struct platform_device bfin_gpios_device = {
 131         .name = "simple-gpio",
 132         .id = -1,
 133         .num_resources = 1,
 134         .resource = &bfin_gpios_resources,
 135 };
 136
 137 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 138 static struct resource bfin_pcmcia_cf_resources[] = {
 139         {
 140                 .start = 0x20310000, /* IO PORT */
 141                 .end = 0x20312000,
 142                 .flags = IORESOURCE_MEM,
 143         }, {
 144                 .start = 0x20311000, /* Attribute Memory */
 145                 .end = 0x20311FFF,
 146                 .flags = IORESOURCE_MEM,
 147         }, {
 148                 .start = IRQ_PF4,
 149                 .end = IRQ_PF4,
 150                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 151         }, {
 152                 .start = 6, /* Card Detect PF6 */
 153                 .end = 6,
 154                 .flags = IORESOURCE_IRQ,
 155         },
 156 };
 157
 158 static struct platform_device bfin_pcmcia_cf_device = {
 159         .name = "bfin_cf_pcmcia",
 160         .id = -1,
 161         .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
 162         .resource = bfin_pcmcia_cf_resources,
 163 };
 164 #endif
 165
 166 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 167 static struct platform_device rtc_device = {
 168         .name = "rtc-bfin",
 169         .id   = -1,
 170 };
 171 #endif
 172
 173 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 174 #include <linux/smc91x.h>
 175
 176 static struct smc91x_platdata smc91x_info = {
 177         .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 178         .leda = RPC_LED_100_10,
 179         .ledb = RPC_LED_TX_RX,
 180 };
 181
 182 static struct resource smc91x_resources[] = {
 183         {
 184                 .name = "smc91x-regs",
 185                 .start = 0x20300300,
 186                 .end = 0x20300300 + 16,
 187                 .flags = IORESOURCE_MEM,
 188         }, {
 189
 190                 .start = IRQ_PF7,
 191                 .end = IRQ_PF7,
 192                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 193         },
 194 };
 195 static struct platform_device smc91x_device = {
 196         .name = "smc91x",
 197         .id = 0,
 198         .num_resources = ARRAY_SIZE(smc91x_resources),
 199         .resource = smc91x_resources,
 200         .dev    = {
 201                 .platform_data  = &smc91x_info,
 202         },
 203 };
 204 #endif
 205
 206 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 207 static struct resource dm9000_resources[] = {
 208         [0] = {
 209                 .start  = 0x203FB800,
 210                 .end    = 0x203FB800 + 1,
 211                 .flags  = IORESOURCE_MEM,
 212         },
 213         [1] = {
 214                 .start  = 0x203FB804,
 215                 .end    = 0x203FB804 + 1,
 216                 .flags  = IORESOURCE_MEM,
 217         },
 218         [2] = {
 219                 .start  = IRQ_PF9,
 220                 .end    = IRQ_PF9,
 221                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
 222         },
 223 };
 224
 225 static struct platform_device dm9000_device = {
 226         .name           = "dm9000",
 227         .id             = -1,
 228         .num_resources  = ARRAY_SIZE(dm9000_resources),
 229         .resource       = dm9000_resources,
 230 };
 231 #endif
 232
 233 #if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
 234 static struct resource ax88180_resources[] = {
 235         [0] = {
 236                 .start  = 0x20300000,
 237                 .end    = 0x20300000 + 0x8000,
 238                 .flags  = IORESOURCE_MEM,
 239         },
 240         [1] = {
 241                 .start  = IRQ_PF7,
 242                 .end    = IRQ_PF7,
 243                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL),
 244         },
 245 };
 246
 247 static struct platform_device ax88180_device = {
 248         .name           = "ax88180",
 249         .id             = -1,
 250         .num_resources  = ARRAY_SIZE(ax88180_resources),
 251         .resource       = ax88180_resources,
 252 };
 253 #endif
 254
 255 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
 256 static struct resource sl811_hcd_resources[] = {
 257         {
 258                 .start = 0x20340000,
 259                 .end = 0x20340000,
 260                 .flags = IORESOURCE_MEM,
 261         }, {
 262                 .start = 0x20340004,
 263                 .end = 0x20340004,
 264                 .flags = IORESOURCE_MEM,
 265         }, {
 266                 .start = CONFIG_USB_SL811_BFIN_IRQ,
 267                 .end = CONFIG_USB_SL811_BFIN_IRQ,
 268                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 269         },
 270 };
 271
 272 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
 273 void sl811_port_power(struct device *dev, int is_on)
 274 {
 275         gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
 276         gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
 277 }
 278 #endif
 279
 280 static struct sl811_platform_data sl811_priv = {
 281         .potpg = 10,
 282         .power = 250,       /* == 500mA */
 283 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
 284         .port_power = &sl811_port_power,
 285 #endif
 286 };
 287
 288 static struct platform_device sl811_hcd_device = {
 289         .name = "sl811-hcd",
 290         .id = 0,
 291         .dev = {
 292                 .platform_data = &sl811_priv,
 293         },
 294         .num_resources = ARRAY_SIZE(sl811_hcd_resources),
 295         .resource = sl811_hcd_resources,
 296 };
 297 #endif
 298
 299 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 300 static struct resource isp1362_hcd_resources[] = {
 301         {
 302                 .start = 0x20360000,
 303                 .end = 0x20360000,
 304                 .flags = IORESOURCE_MEM,
 305         }, {
 306                 .start = 0x20360004,
 307                 .end = 0x20360004,
 308                 .flags = IORESOURCE_MEM,
 309         }, {
 310                 .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
 311                 .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
 312                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 313         },
 314 };
 315
 316 static struct isp1362_platform_data isp1362_priv = {
 317         .sel15Kres = 1,
 318         .clknotstop = 0,
 319         .oc_enable = 0,
 320         .int_act_high = 0,
 321         .int_edge_triggered = 0,
 322         .remote_wakeup_connected = 0,
 323         .no_power_switching = 1,
 324         .power_switching_mode = 0,
 325 };
 326
 327 static struct platform_device isp1362_hcd_device = {
 328         .name = "isp1362-hcd",
 329         .id = 0,
 330         .dev = {
 331                 .platform_data = &isp1362_priv,
 332         },
 333         .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
 334         .resource = isp1362_hcd_resources,
 335 };
 336 #endif
 337
 338 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 339 static struct platform_device bfin_mii_bus = {
 340         .name = "bfin_mii_bus",
 341 };
 342
 343 static struct platform_device bfin_mac_device = {
 344         .name = "bfin_mac",
 345         .dev.platform_data = &bfin_mii_bus,
 346 };
 347 #endif
 348
 349 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 350 static struct resource net2272_bfin_resources[] = {
 351         {
 352                 .start = 0x20300000,
 353                 .end = 0x20300000 + 0x100,
 354                 .flags = IORESOURCE_MEM,
 355         }, {
 356                 .start = IRQ_PF7,
 357                 .end = IRQ_PF7,
 358                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 359         },
 360 };
 361
 362 static struct platform_device net2272_bfin_device = {
 363         .name = "net2272",
 364         .id = -1,
 365         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 366         .resource = net2272_bfin_resources,
 367 };
 368 #endif
 369
 370 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 371 #ifdef CONFIG_MTD_PARTITIONS
 372 const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
 373
 374 static struct mtd_partition bfin_plat_nand_partitions[] = {
 375         {
 376                 .name   = "linux kernel(nand)",
 377                 .size   = 0x400000,
 378                 .offset = 0,
 379         }, {
 380                 .name   = "file system(nand)",
 381                 .size   = MTDPART_SIZ_FULL,
 382                 .offset = MTDPART_OFS_APPEND,
 383         },
 384 };
 385 #endif
 386
 387 #define BFIN_NAND_PLAT_CLE 2
 388 #define BFIN_NAND_PLAT_ALE 1
 389 static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 390 {
 391         struct nand_chip *this = mtd->priv;
 392
 393         if (cmd == NAND_CMD_NONE)
 394                 return;
 395
 396         if (ctrl & NAND_CLE)
 397                 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
 398         else
 399                 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
 400 }
 401
 402 #define BFIN_NAND_PLAT_READY GPIO_PF3
 403 static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
 404 {
 405         return gpio_get_value(BFIN_NAND_PLAT_READY);
 406 }
 407
 408 static struct platform_nand_data bfin_plat_nand_data = {
 409         .chip = {
 410                 .chip_delay = 30,
 411 #ifdef CONFIG_MTD_PARTITIONS
 412                 .part_probe_types = part_probes,
 413                 .partitions = bfin_plat_nand_partitions,
 414                 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
 415 #endif
 416         },
 417         .ctrl = {
 418                 .cmd_ctrl  = bfin_plat_nand_cmd_ctrl,
 419                 .dev_ready = bfin_plat_nand_dev_ready,
 420         },
 421 };
 422
 423 #define MAX(x, y) (x > y ? x : y)
 424 static struct resource bfin_plat_nand_resources = {
 425         .start = 0x20212000,
 426         .end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
 427         .flags = IORESOURCE_IO,
 428 };
 429
 430 static struct platform_device bfin_async_nand_device = {
 431         .name = "gen_nand",
 432         .id = -1,
 433         .num_resources = 1,
 434         .resource = &bfin_plat_nand_resources,
 435         .dev = {
 436                 .platform_data = &bfin_plat_nand_data,
 437         },
 438 };
 439
 440 static void bfin_plat_nand_init(void)
 441 {
 442         gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
 443 }
 444 #else
 445 static void bfin_plat_nand_init(void) {}
 446 #endif
 447
 448 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 449 static struct mtd_partition stamp_partitions[] = {
 450         {
 451                 .name       = "bootloader(nor)",
 452                 .size       = 0x40000,
 453                 .offset     = 0,
 454         }, {
 455                 .name       = "linux kernel(nor)",
 456                 .size       = 0x180000,
 457                 .offset     = MTDPART_OFS_APPEND,
 458         }, {
 459                 .name       = "file system(nor)",
 460                 .size       = 0x400000 - 0x40000 - 0x180000 - 0x10000,
 461                 .offset     = MTDPART_OFS_APPEND,
 462         }, {
 463                 .name       = "MAC Address(nor)",
 464                 .size       = MTDPART_SIZ_FULL,
 465                 .offset     = 0x3F0000,
 466                 .mask_flags = MTD_WRITEABLE,
 467         }
 468 };
 469
 470 static struct physmap_flash_data stamp_flash_data = {
 471         .width      = 2,
 472         .parts      = stamp_partitions,
 473         .nr_parts   = ARRAY_SIZE(stamp_partitions),
 474 };
 475
 476 static struct resource stamp_flash_resource = {
 477         .start = 0x20000000,
 478         .end   = 0x203fffff,
 479         .flags = IORESOURCE_MEM,
 480 };
 481
 482 static struct platform_device stamp_flash_device = {
 483         .name          = "physmap-flash",
 484         .id            = 0,
 485         .dev = {
 486                 .platform_data = &stamp_flash_data,
 487         },
 488         .num_resources = 1,
 489         .resource      = &stamp_flash_resource,
 490 };
 491 #endif
 492
 493 #if defined(CONFIG_MTD_M25P80) \
 494         || defined(CONFIG_MTD_M25P80_MODULE)
 495 static struct mtd_partition bfin_spi_flash_partitions[] = {
 496         {
 497                 .name = "bootloader(spi)",
 498                 .size = 0x00040000,
 499                 .offset = 0,
 500                 .mask_flags = MTD_CAP_ROM
 501         }, {
 502                 .name = "linux kernel(spi)",
 503                 .size = 0x180000,
 504                 .offset = MTDPART_OFS_APPEND,
 505         }, {
 506                 .name = "file system(spi)",
 507                 .size = MTDPART_SIZ_FULL,
 508                 .offset = MTDPART_OFS_APPEND,
 509         }
 510 };
 511
 512 static struct flash_platform_data bfin_spi_flash_data = {
 513         .name = "m25p80",
 514         .parts = bfin_spi_flash_partitions,
 515         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 516         /* .type = "m25p64", */
 517 };
 518
 519 /* SPI flash chip (m25p64) */
 520 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 521         .enable_dma = 0,         /* use dma transfer with this chip*/
 522         .bits_per_word = 8,
 523 };
 524 #endif
 525
 526 #if defined(CONFIG_BFIN_SPI_ADC) \
 527         || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 528 /* SPI ADC chip */
 529 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 530         .enable_dma = 1,         /* use dma transfer with this chip*/
 531         .bits_per_word = 16,
 532 };
 533 #endif
 534
 535 #if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
 536         || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
 537 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 538         .enable_dma = 0,
 539         .bits_per_word = 16,
 540 };
 541 #endif
 542
 543 #if defined(CONFIG_SND_BF5XX_SOC_AD1938) \
 544         || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
 545 static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
 546         .enable_dma = 0,
 547         .bits_per_word = 8,
 548         .cs_gpio = GPIO_PF5,
 549 };
 550 #endif
 551
 552 #if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
 553 #include <linux/input.h>
 554 #include <linux/input/ad714x.h>
 555 static struct bfin5xx_spi_chip ad7147_spi_chip_info = {
 556         .enable_dma = 0,
 557         .bits_per_word = 16,
 558 };
 559
 560 static struct ad714x_slider_plat slider_plat[] = {
 561         {
 562                 .start_stage = 0,
 563                 .end_stage = 7,
 564                 .max_coord = 128,
 565         },
 566 };
 567
 568 static struct ad714x_button_plat button_plat[] = {
 569         {
 570                 .keycode = BTN_FORWARD,
 571                 .l_mask = 0,
 572                 .h_mask = 0x600,
 573         },
 574         {
 575                 .keycode = BTN_LEFT,
 576                 .l_mask = 0,
 577                 .h_mask = 0x500,
 578         },
 579         {
 580                 .keycode = BTN_MIDDLE,
 581                 .l_mask = 0,
 582                 .h_mask = 0x800,
 583         },
 584         {
 585                 .keycode = BTN_RIGHT,
 586                 .l_mask = 0x100,
 587                 .h_mask = 0x400,
 588         },
 589         {
 590                 .keycode = BTN_BACK,
 591                 .l_mask = 0x200,
 592                 .h_mask = 0x400,
 593         },
 594 };
 595 static struct ad714x_platform_data ad7147_platfrom_data = {
 596         .slider_num = 1,
 597         .button_num = 5,
 598         .slider = slider_plat,
 599         .button = button_plat,
 600         .stage_cfg_reg =  {
 601                 {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
 602                 {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
 603                 {0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
 604                 {0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
 605                 {0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
 606                 {0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
 607                 {0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
 608                 {0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
 609                 {0xFF7B, 0x3FFF, 0x506,  0x2626, 1100, 1100, 1150, 1150},
 610                 {0xFDFE, 0x3FFF, 0x606,  0x2626, 1100, 1100, 1150, 1150},
 611                 {0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
 612                 {0xFFEF, 0x1FFF, 0x0,    0x2626, 1100, 1100, 1150, 1150},
 613         },
 614         .sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
 615 };
 616 #endif
 617
 618 #if defined(CONFIG_INPUT_EVAL_AD7142EB)
 619 #include <linux/input.h>
 620 #include <linux/input/ad714x.h>
 621 static struct ad714x_button_plat button_plat[] = {
 622         {
 623                 .keycode = BTN_1,
 624                 .l_mask = 0,
 625                 .h_mask = 0x1,
 626         },
 627         {
 628                 .keycode = BTN_2,
 629                 .l_mask = 0,
 630                 .h_mask = 0x2,
 631         },
 632         {
 633                 .keycode = BTN_3,
 634                 .l_mask = 0,
 635                 .h_mask = 0x4,
 636         },
 637         {
 638                 .keycode = BTN_4,
 639                 .l_mask = 0x0,
 640                 .h_mask = 0x8,
 641         },
 642 };
 643 static struct ad714x_platform_data ad7142_platfrom_data = {
 644         .button_num = 4,
 645         .button = button_plat,
 646         .stage_cfg_reg =  {
 647                 /* fixme: figure out right setting for all comoponent according
 648                  * to hardware feature of EVAL-AD7142EB board */
 649                 {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 650                 {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 651                 {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 652                 {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 653                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 654                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 655                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 656                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 657                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 658                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 659                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 660                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 661         },
 662         .sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
 663 };
 664 #endif
 665
 666 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 667 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
 668
 669 static int bfin_mmc_spi_init(struct device *dev,
 670         irqreturn_t (*detect_int)(int, void *), void *data)
 671 {
 672         return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
 673                 IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
 674 }
 675
 676 static void bfin_mmc_spi_exit(struct device *dev, void *data)
 677 {
 678         free_irq(MMC_SPI_CARD_DETECT_INT, data);
 679 }
 680
 681 static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
 682         .init = bfin_mmc_spi_init,
 683         .exit = bfin_mmc_spi_exit,
 684         .detect_delay = 100, /* msecs */
 685 };
 686
 687 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 688         .enable_dma = 0,
 689         .bits_per_word = 8,
 690         .pio_interrupt = 0,
 691 };
 692 #endif
 693
 694 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 695 #include <linux/spi/ad7877.h>
 696 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 697         .enable_dma = 0,
 698         .bits_per_word = 16,
 699 };
 700
 701 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 702         .model                  = 7877,
 703         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 704         .x_plate_ohms           = 419,
 705         .y_plate_ohms           = 486,
 706         .pressure_max           = 1000,
 707         .pressure_min           = 0,
 708         .stopacq_polarity       = 1,
 709         .first_conversion_delay = 3,
 710         .acquisition_time       = 1,
 711         .averaging              = 1,
 712         .pen_down_acc_interval  = 1,
 713 };
 714 #endif
 715
 716 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
 717 #include <linux/spi/ad7879.h>
 718 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 719         .model                  = 7879, /* Model = AD7879 */
 720         .x_plate_ohms           = 620,  /* 620 Ohm from the touch datasheet */
 721         .pressure_max           = 10000,
 722         .pressure_min           = 0,
 723         .first_conversion_delay = 3,    /* wait 512us before do a first conversion */
 724         .acquisition_time       = 1,    /* 4us acquisition time per sample */
 725         .median                 = 2,    /* do 8 measurements */
 726         .averaging              = 1,    /* take the average of 4 middle samples */
 727         .pen_down_acc_interval  = 255,  /* 9.4 ms */
 728         .gpio_output            = 1,    /* configure AUX/VBAT/GPIO as GPIO output */
 729         .gpio_default           = 1,    /* During initialization set GPIO = HIGH */
 730 };
 731 #endif
 732
 733 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
 734 #include <linux/input.h>
 735 #include <linux/spi/adxl34x.h>
 736 static const struct adxl34x_platform_data adxl34x_info = {
 737         .x_axis_offset = 0,
 738         .y_axis_offset = 0,
 739         .z_axis_offset = 0,
 740         .tap_threshold = 0x31,
 741         .tap_duration = 0x10,
 742         .tap_latency = 0x60,
 743         .tap_window = 0xF0,
 744         .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
 745         .act_axis_control = 0xFF,
 746         .activity_threshold = 5,
 747         .inactivity_threshold = 3,
 748         .inactivity_time = 4,
 749         .free_fall_threshold = 0x7,
 750         .free_fall_time = 0x20,
 751         .data_rate = 0x8,
 752         .data_range = ADXL_FULL_RES,
 753
 754         .ev_type = EV_ABS,
 755         .ev_code_x = ABS_X,             /* EV_REL */
 756         .ev_code_y = ABS_Y,             /* EV_REL */
 757         .ev_code_z = ABS_Z,             /* EV_REL */
 758
 759         .ev_code_tap_x = BTN_TOUCH,             /* EV_KEY */
 760         .ev_code_tap_y = BTN_TOUCH,             /* EV_KEY */
 761         .ev_code_tap_z = BTN_TOUCH,             /* EV_KEY */
 762
 763 /*      .ev_code_ff = KEY_F,*/          /* EV_KEY */
 764 /*      .ev_code_act_inactivity = KEY_A,*/      /* EV_KEY */
 765         .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
 766         .fifo_mode = ADXL_FIFO_STREAM,
 767 };
 768 #endif
 769
 770 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 771 static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
 772         .enable_dma = 0,
 773         .bits_per_word = 16,
 774 };
 775 #endif
 776
 777 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 778 static struct bfin5xx_spi_chip spidev_chip_info = {
 779         .enable_dma = 0,
 780         .bits_per_word = 8,
 781 };
 782 #endif
 783
 784 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 785 static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
 786         .enable_dma     = 0,
 787         .bits_per_word  = 8,
 788 };
 789 #endif
 790
 791 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
 792 static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
 793         .enable_dma     = 1,
 794         .bits_per_word  = 8,
 795         .cs_gpio = GPIO_PF10,
 796 };
 797 #endif
 798
 799 #if defined(CONFIG_MTD_DATAFLASH) \
 800         || defined(CONFIG_MTD_DATAFLASH_MODULE)
 801
 802 static struct mtd_partition bfin_spi_dataflash_partitions[] = {
 803         {
 804                 .name = "bootloader(spi)",
 805                 .size = 0x00040000,
 806                 .offset = 0,
 807                 .mask_flags = MTD_CAP_ROM
 808         }, {
 809                 .name = "linux kernel(spi)",
 810                 .size = 0x180000,
 811                 .offset = MTDPART_OFS_APPEND,
 812         }, {
 813                 .name = "file system(spi)",
 814                 .size = MTDPART_SIZ_FULL,
 815                 .offset = MTDPART_OFS_APPEND,
 816         }
 817 };
 818
 819 static struct flash_platform_data bfin_spi_dataflash_data = {
 820         .name = "SPI Dataflash",
 821         .parts = bfin_spi_dataflash_partitions,
 822         .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
 823 };
 824
 825 /* DataFlash chip */
 826 static struct bfin5xx_spi_chip data_flash_chip_info = {
 827         .enable_dma = 0,         /* use dma transfer with this chip*/
 828         .bits_per_word = 8,
 829 };
 830 #endif
 831
 832 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 833 #if defined(CONFIG_MTD_M25P80) \
 834         || defined(CONFIG_MTD_M25P80_MODULE)
 835         {
 836                 /* the modalias must be the same as spi device driver name */
 837                 .modalias = "m25p80", /* Name of spi_driver for this device */
 838                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 839                 .bus_num = 0, /* Framework bus number */
 840                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 841                 .platform_data = &bfin_spi_flash_data,
 842                 .controller_data = &spi_flash_chip_info,
 843                 .mode = SPI_MODE_3,
 844         },
 845 #endif
 846 #if defined(CONFIG_MTD_DATAFLASH) \
 847         || defined(CONFIG_MTD_DATAFLASH_MODULE)
 848         {       /* DataFlash chip */
 849                 .modalias = "mtd_dataflash",
 850                 .max_speed_hz = 33250000,     /* max spi clock (SCK) speed in HZ */
 851                 .bus_num = 0, /* Framework bus number */
 852                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 853                 .platform_data = &bfin_spi_dataflash_data,
 854                 .controller_data = &data_flash_chip_info,
 855                 .mode = SPI_MODE_3,
 856         },
 857 #endif
 858 #if defined(CONFIG_BFIN_SPI_ADC) \
 859         || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 860         {
 861                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 862                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
 863                 .bus_num = 0, /* Framework bus number */
 864                 .chip_select = 1, /* Framework chip select. */
 865                 .platform_data = NULL, /* No spi_driver specific config */
 866                 .controller_data = &spi_adc_chip_info,
 867         },
 868 #endif
 869
 870 #if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
 871         || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
 872         {
 873                 .modalias = "ad1836",
 874                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 875                 .bus_num = 0,
 876                 .chip_select = 4,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
 877                 .controller_data = &ad1836_spi_chip_info,
 878                 .mode = SPI_MODE_3,
 879         },
 880 #endif
 881
 882 #if defined(CONFIG_SND_BF5XX_SOC_AD1938) || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
 883         {
 884                 .modalias = "ad1938",
 885                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 886                 .bus_num = 0,
 887                 .chip_select = 0,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
 888                 .controller_data = &ad1938_spi_chip_info,
 889                 .mode = SPI_MODE_3,
 890         },
 891 #endif
 892
 893 #if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
 894         {
 895                 .modalias = "ad714x_captouch",
 896                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
 897                 .irq = IRQ_PF4,
 898                 .bus_num = 0,
 899                 .chip_select = 5,
 900                 .mode = SPI_MODE_3,
 901                 .platform_data = &ad7147_platfrom_data,
 902                 .controller_data = &ad7147_spi_chip_info,
 903         },
 904 #endif
 905
 906 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 907         {
 908                 .modalias = "mmc_spi",
 909                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 910                 .bus_num = 0,
 911                 .chip_select = 4,
 912                 .platform_data = &bfin_mmc_spi_pdata,
 913                 .controller_data = &mmc_spi_chip_info,
 914                 .mode = SPI_MODE_3,
 915         },
 916 #endif
 917 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 918         {
 919                 .modalias               = "ad7877",
 920                 .platform_data          = &bfin_ad7877_ts_info,
 921                 .irq                    = IRQ_PF6,
 922                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
 923                 .bus_num        = 0,
 924                 .chip_select  = 1,
 925                 .controller_data = &spi_ad7877_chip_info,
 926         },
 927 #endif
 928 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 929         {
 930                 .modalias = "ad7879",
 931                 .platform_data = &bfin_ad7879_ts_info,
 932                 .irq = IRQ_PF7,
 933                 .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
 934                 .bus_num = 0,
 935                 .chip_select = 1,
 936                 .controller_data = &spi_ad7879_chip_info,
 937                 .mode = SPI_CPHA | SPI_CPOL,
 938         },
 939 #endif
 940 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 941         {
 942                 .modalias = "spidev",
 943                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 944                 .bus_num = 0,
 945                 .chip_select = 1,
 946                 .controller_data = &spidev_chip_info,
 947         },
 948 #endif
 949 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 950         {
 951                 .modalias = "bfin-lq035q1-spi",
 952                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 953                 .bus_num = 0,
 954                 .chip_select = 2,
 955                 .controller_data = &lq035q1_spi_chip_info,
 956                 .mode = SPI_CPHA | SPI_CPOL,
 957         },
 958 #endif
 959 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
 960         {
 961                 .modalias = "enc28j60",
 962                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 963                 .irq = IRQ_PF6,
 964                 .bus_num = 0,
 965                 .chip_select = 0,       /* GPIO controlled SSEL */
 966                 .controller_data = &enc28j60_spi_chip_info,
 967                 .mode = SPI_MODE_0,
 968         },
 969 #endif
 970 };
 971
 972 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 973 /* SPI controller data */
 974 static struct bfin5xx_spi_master bfin_spi0_info = {
 975         .num_chipselect = 8,
 976         .enable_dma = 1,  /* master has the ability to do dma transfer */
 977         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 978 };
 979
 980 /* SPI (0) */
 981 static struct resource bfin_spi0_resource[] = {
 982         [0] = {
 983                 .start = SPI0_REGBASE,
 984                 .end   = SPI0_REGBASE + 0xFF,
 985                 .flags = IORESOURCE_MEM,
 986                 },
 987         [1] = {
 988                 .start = CH_SPI,
 989                 .end   = CH_SPI,
 990                 .flags = IORESOURCE_DMA,
 991         },
 992         [2] = {
 993                 .start = IRQ_SPI,
 994                 .end   = IRQ_SPI,
 995                 .flags = IORESOURCE_IRQ,
 996         },
 997 };
 998
 999 static struct platform_device bfin_spi0_device = {
1000         .name = "bfin-spi",
1001         .id = 0, /* Bus number */
1002         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
1003         .resource = bfin_spi0_resource,
1004         .dev = {
1005                 .platform_data = &bfin_spi0_info, /* Passed to driver */
1006         },
1007 };
1008 #endif  /* spi master and devices */
1009
1010 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
1011
1012 /* SPORT SPI controller data */
1013 static struct bfin5xx_spi_master bfin_sport_spi0_info = {
1014         .num_chipselect = 1, /* master only supports one device */
1015         .enable_dma = 0,  /* master don't support DMA */
1016         .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
1017                 P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
1018 };
1019
1020 static struct resource bfin_sport_spi0_resource[] = {
1021         [0] = {
1022                 .start = SPORT0_TCR1,
1023                 .end   = SPORT0_TCR1 + 0xFF,
1024                 .flags = IORESOURCE_MEM,
1025                 },
1026         [1] = {
1027                 .start = IRQ_SPORT0_ERROR,
1028                 .end   = IRQ_SPORT0_ERROR,
1029                 .flags = IORESOURCE_IRQ,
1030                 },
1031 };
1032
1033 static struct platform_device bfin_sport_spi0_device = {
1034         .name = "bfin-sport-spi",
1035         .id = 1, /* Bus number */
1036         .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
1037         .resource = bfin_sport_spi0_resource,
1038         .dev = {
1039                 .platform_data = &bfin_sport_spi0_info, /* Passed to driver */
1040         },
1041 };
1042
1043 static struct bfin5xx_spi_master bfin_sport_spi1_info = {
1044         .num_chipselect = 1, /* master only supports one device */
1045         .enable_dma = 0,  /* master don't support DMA */
1046         .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
1047                 P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
1048 };
1049
1050 static struct resource bfin_sport_spi1_resource[] = {
1051         [0] = {
1052                 .start = SPORT1_TCR1,
1053                 .end   = SPORT1_TCR1 + 0xFF,
1054                 .flags = IORESOURCE_MEM,
1055                 },
1056         [1] = {
1057                 .start = IRQ_SPORT1_ERROR,
1058                 .end   = IRQ_SPORT1_ERROR,
1059                 .flags = IORESOURCE_IRQ,
1060                 },
1061 };
1062
1063 static struct platform_device bfin_sport_spi1_device = {
1064         .name = "bfin-sport-spi",
1065         .id = 2, /* Bus number */
1066         .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
1067         .resource = bfin_sport_spi1_resource,
1068         .dev = {
1069                 .platform_data = &bfin_sport_spi1_info, /* Passed to driver */
1070         },
1071 };
1072
1073 #endif  /* sport spi master and devices */
1074
1075 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
1076 static struct platform_device bfin_fb_device = {
1077         .name = "bf537-lq035",
1078 };
1079 #endif
1080
1081 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
1082 static struct platform_device bfin_fb_adv7393_device = {
1083         .name = "bfin-adv7393",
1084 };
1085 #endif
1086
1087 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1088 #include <asm/bfin-lq035q1.h>
1089
1090 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
1091         .mode =         LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
1092         .use_bl =       0,      /* let something else control the LCD Blacklight */
1093         .gpio_bl =      GPIO_PF7,
1094 };
1095
1096 static struct resource bfin_lq035q1_resources[] = {
1097         {
1098                 .start = IRQ_PPI_ERROR,
1099                 .end = IRQ_PPI_ERROR,
1100                 .flags = IORESOURCE_IRQ,
1101         },
1102 };
1103
1104 static struct platform_device bfin_lq035q1_device = {
1105         .name           = "bfin-lq035q1",
1106         .id             = -1,
1107         .num_resources  = ARRAY_SIZE(bfin_lq035q1_resources),
1108         .resource       = bfin_lq035q1_resources,
1109         .dev            = {
1110                 .platform_data = &bfin_lq035q1_data,
1111         },
1112 };
1113 #endif
1114
1115 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1116 static struct resource bfin_uart_resources[] = {
1117 #ifdef CONFIG_SERIAL_BFIN_UART0
1118         {
1119                 .start = 0xFFC00400,
1120                 .end = 0xFFC004FF,
1121                 .flags = IORESOURCE_MEM,
1122         },
1123 #endif
1124 #ifdef CONFIG_SERIAL_BFIN_UART1
1125         {
1126                 .start = 0xFFC02000,
1127                 .end = 0xFFC020FF,
1128                 .flags = IORESOURCE_MEM,
1129         },
1130 #endif
1131 };
1132
1133 static struct platform_device bfin_uart_device = {
1134         .name = "bfin-uart",
1135         .id = 1,
1136         .num_resources = ARRAY_SIZE(bfin_uart_resources),
1137         .resource = bfin_uart_resources,
1138 };
1139 #endif
1140
1141 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1142 #ifdef CONFIG_BFIN_SIR0
1143 static struct resource bfin_sir0_resources[] = {
1144         {
1145                 .start = 0xFFC00400,
1146                 .end = 0xFFC004FF,
1147                 .flags = IORESOURCE_MEM,
1148         },
1149         {
1150                 .start = IRQ_UART0_RX,
1151                 .end = IRQ_UART0_RX+1,
1152                 .flags = IORESOURCE_IRQ,
1153         },
1154         {
1155                 .start = CH_UART0_RX,
1156                 .end = CH_UART0_RX+1,
1157                 .flags = IORESOURCE_DMA,
1158         },
1159 };
1160
1161 static struct platform_device bfin_sir0_device = {
1162         .name = "bfin_sir",
1163         .id = 0,
1164         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
1165         .resource = bfin_sir0_resources,
1166 };
1167 #endif
1168 #ifdef CONFIG_BFIN_SIR1
1169 static struct resource bfin_sir1_resources[] = {
1170         {
1171                 .start = 0xFFC02000,
1172                 .end = 0xFFC020FF,
1173                 .flags = IORESOURCE_MEM,
1174         },
1175         {
1176                 .start = IRQ_UART1_RX,
1177                 .end = IRQ_UART1_RX+1,
1178                 .flags = IORESOURCE_IRQ,
1179         },
1180         {
1181                 .start = CH_UART1_RX,
1182                 .end = CH_UART1_RX+1,
1183                 .flags = IORESOURCE_DMA,
1184         },
1185 };
1186
1187 static struct platform_device bfin_sir1_device = {
1188         .name = "bfin_sir",
1189         .id = 1,
1190         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
1191         .resource = bfin_sir1_resources,
1192 };
1193 #endif
1194 #endif
1195
1196 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1197 static struct resource bfin_twi0_resource[] = {
1198         [0] = {
1199                 .start = TWI0_REGBASE,
1200                 .end   = TWI0_REGBASE,
1201                 .flags = IORESOURCE_MEM,
1202         },
1203         [1] = {
1204                 .start = IRQ_TWI,
1205                 .end   = IRQ_TWI,
1206                 .flags = IORESOURCE_IRQ,
1207         },
1208 };
1209
1210 static struct platform_device i2c_bfin_twi_device = {
1211         .name = "i2c-bfin-twi",
1212         .id = 0,
1213         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1214         .resource = bfin_twi0_resource,
1215 };
1216 #endif
1217
1218 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1219 #include <linux/input.h>
1220 #include <linux/i2c/adp5588.h>
1221 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
1222         [0]      = KEY_GRAVE,
1223         [1]      = KEY_1,
1224         [2]      = KEY_2,
1225         [3]      = KEY_3,
1226         [4]      = KEY_4,
1227         [5]      = KEY_5,
1228         [6]      = KEY_6,
1229         [7]      = KEY_7,
1230         [8]      = KEY_8,
1231         [9]      = KEY_9,
1232         [10]     = KEY_0,
1233         [11]     = KEY_MINUS,
1234         [12]     = KEY_EQUAL,
1235         [13]     = KEY_BACKSLASH,
1236         [15]     = KEY_KP0,
1237         [16]     = KEY_Q,
1238         [17]     = KEY_W,
1239         [18]     = KEY_E,
1240         [19]     = KEY_R,
1241         [20]     = KEY_T,
1242         [21]     = KEY_Y,
1243         [22]     = KEY_U,
1244         [23]     = KEY_I,
1245         [24]     = KEY_O,
1246         [25]     = KEY_P,
1247         [26]     = KEY_LEFTBRACE,
1248         [27]     = KEY_RIGHTBRACE,
1249         [29]     = KEY_KP1,
1250         [30]     = KEY_KP2,
1251         [31]     = KEY_KP3,
1252         [32]     = KEY_A,
1253         [33]     = KEY_S,
1254         [34]     = KEY_D,
1255         [35]     = KEY_F,
1256         [36]     = KEY_G,
1257         [37]     = KEY_H,
1258         [38]     = KEY_J,
1259         [39]     = KEY_K,
1260         [40]     = KEY_L,
1261         [41]     = KEY_SEMICOLON,
1262         [42]     = KEY_APOSTROPHE,
1263         [43]     = KEY_BACKSLASH,
1264         [45]     = KEY_KP4,
1265         [46]     = KEY_KP5,
1266         [47]     = KEY_KP6,
1267         [48]     = KEY_102ND,
1268         [49]     = KEY_Z,
1269         [50]     = KEY_X,
1270         [51]     = KEY_C,
1271         [52]     = KEY_V,
1272         [53]     = KEY_B,
1273         [54]     = KEY_N,
1274         [55]     = KEY_M,
1275         [56]     = KEY_COMMA,
1276         [57]     = KEY_DOT,
1277         [58]     = KEY_SLASH,
1278         [60]     = KEY_KPDOT,
1279         [61]     = KEY_KP7,
1280         [62]     = KEY_KP8,
1281         [63]     = KEY_KP9,
1282         [64]     = KEY_SPACE,
1283         [65]     = KEY_BACKSPACE,
1284         [66]     = KEY_TAB,
1285         [67]     = KEY_KPENTER,
1286         [68]     = KEY_ENTER,
1287         [69]     = KEY_ESC,
1288         [70]     = KEY_DELETE,
1289         [74]     = KEY_KPMINUS,
1290         [76]     = KEY_UP,
1291         [77]     = KEY_DOWN,
1292         [78]     = KEY_RIGHT,
1293         [79]     = KEY_LEFT,
1294 };
1295
1296 static struct adp5588_kpad_platform_data adp5588_kpad_data = {
1297         .rows           = 8,
1298         .cols           = 10,
1299         .keymap         = adp5588_keymap,
1300         .keymapsize     = ARRAY_SIZE(adp5588_keymap),
1301         .repeat         = 0,
1302 };
1303 #endif
1304
1305 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1306 #include <linux/mfd/adp5520.h>
1307
1308         /*
1309          *  ADP5520/5501 Backlight Data
1310          */
1311
1312 static struct adp5520_backlight_platfrom_data adp5520_backlight_data = {
1313         .fade_in                = FADE_T_1200ms,
1314         .fade_out               = FADE_T_1200ms,
1315         .fade_led_law           = BL_LAW_LINEAR,
1316         .en_ambl_sens           = 1,
1317         .abml_filt              = BL_AMBL_FILT_640ms,
1318         .l1_daylight_max        = BL_CUR_mA(15),
1319         .l1_daylight_dim        = BL_CUR_mA(0),
1320         .l2_office_max          = BL_CUR_mA(7),
1321         .l2_office_dim          = BL_CUR_mA(0),
1322         .l3_dark_max            = BL_CUR_mA(3),
1323         .l3_dark_dim            = BL_CUR_mA(0),
1324         .l2_trip                = L2_COMP_CURR_uA(700),
1325         .l2_hyst                = L2_COMP_CURR_uA(50),
1326         .l3_trip                = L3_COMP_CURR_uA(80),
1327         .l3_hyst                = L3_COMP_CURR_uA(20),
1328 };
1329
1330         /*
1331          *  ADP5520/5501 LEDs Data
1332          */
1333
1334 #include <linux/leds.h>
1335
1336 static struct led_info adp5520_leds[] = {
1337         {
1338                 .name = "adp5520-led1",
1339                 .default_trigger = "none",
1340                 .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | LED_OFFT_600ms,
1341         },
1342 #ifdef ADP5520_EN_ALL_LEDS
1343         {
1344                 .name = "adp5520-led2",
1345                 .default_trigger = "none",
1346                 .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
1347         },
1348         {
1349                 .name = "adp5520-led3",
1350                 .default_trigger = "none",
1351                 .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
1352         },
1353 #endif
1354 };
1355
1356 static struct adp5520_leds_platfrom_data adp5520_leds_data = {
1357         .num_leds = ARRAY_SIZE(adp5520_leds),
1358         .leds = adp5520_leds,
1359         .fade_in = FADE_T_600ms,
1360         .fade_out = FADE_T_600ms,
1361         .led_on_time = LED_ONT_600ms,
1362 };
1363
1364         /*
1365          *  ADP5520 GPIO Data
1366          */
1367
1368 static struct adp5520_gpio_platfrom_data adp5520_gpio_data = {
1369         .gpio_start = 50,
1370         .gpio_en_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
1371         .gpio_pullup_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
1372 };
1373
1374         /*
1375          *  ADP5520 Keypad Data
1376          */
1377
1378 #include <linux/input.h>
1379 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
1380         [KEY(0, 0)]     = KEY_GRAVE,
1381         [KEY(0, 1)]     = KEY_1,
1382         [KEY(0, 2)]     = KEY_2,
1383         [KEY(0, 3)]     = KEY_3,
1384         [KEY(1, 0)]     = KEY_4,
1385         [KEY(1, 1)]     = KEY_5,
1386         [KEY(1, 2)]     = KEY_6,
1387         [KEY(1, 3)]     = KEY_7,
1388         [KEY(2, 0)]     = KEY_8,
1389         [KEY(2, 1)]     = KEY_9,
1390         [KEY(2, 2)]     = KEY_0,
1391         [KEY(2, 3)]     = KEY_MINUS,
1392         [KEY(3, 0)]     = KEY_EQUAL,
1393         [KEY(3, 1)]     = KEY_BACKSLASH,
1394         [KEY(3, 2)]     = KEY_BACKSPACE,
1395         [KEY(3, 3)]     = KEY_ENTER,
1396 };
1397
1398 static struct adp5520_keys_platfrom_data adp5520_keys_data = {
1399         .rows_en_mask   = ROW_R3 | ROW_R2 | ROW_R1 | ROW_R0,
1400         .cols_en_mask   = COL_C3 | COL_C2 | COL_C1 | COL_C0,
1401         .keymap         = adp5520_keymap,
1402         .keymapsize     = ARRAY_SIZE(adp5520_keymap),
1403         .repeat         = 0,
1404 };
1405
1406         /*
1407          *  ADP5520/5501 Multifuction Device Init Data
1408          */
1409
1410 static struct adp5520_subdev_info adp5520_subdevs[] = {
1411         {
1412                 .name = "adp5520-backlight",
1413                 .id = ID_ADP5520,
1414                 .platform_data = &adp5520_backlight_data,
1415         },
1416         {
1417                 .name = "adp5520-led",
1418                 .id = ID_ADP5520,
1419                 .platform_data = &adp5520_leds_data,
1420         },
1421         {
1422                 .name = "adp5520-gpio",
1423                 .id = ID_ADP5520,
1424                 .platform_data = &adp5520_gpio_data,
1425         },
1426         {
1427                 .name = "adp5520-keys",
1428                 .id = ID_ADP5520,
1429                 .platform_data = &adp5520_keys_data,
1430         },
1431 };
1432
1433 static struct adp5520_platform_data adp5520_pdev_data = {
1434         .num_subdevs = ARRAY_SIZE(adp5520_subdevs),
1435         .subdevs = adp5520_subdevs,
1436 };
1437
1438 #endif
1439
1440 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
1441 #include <linux/i2c/adp5588.h>
1442 static struct adp5588_gpio_platfrom_data adp5588_gpio_data = {
1443         .gpio_start = 50,
1444         .pullup_dis_mask = 0,
1445 };
1446 #endif
1447
1448 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
1449 #if defined(CONFIG_INPUT_EVAL_AD7142EB)
1450         {
1451                 I2C_BOARD_INFO("ad7142_captouch", 0x2C),
1452                 .irq = IRQ_PG5,
1453                 .platform_data = (void *)&ad7142_platfrom_data,
1454         },
1455 #endif
1456 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
1457         {
1458                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
1459         },
1460 #endif
1461 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
1462         {
1463                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
1464                 .irq = IRQ_PG6,
1465         },
1466 #endif
1467 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
1468         {
1469                 I2C_BOARD_INFO("ad7879", 0x2F),
1470                 .irq = IRQ_PG5,
1471                 .platform_data = (void *)&bfin_ad7879_ts_info,
1472         },
1473 #endif
1474 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1475         {
1476                 I2C_BOARD_INFO("adp5588-keys", 0x34),
1477                 .irq = IRQ_PG0,
1478                 .platform_data = (void *)&adp5588_kpad_data,
1479         },
1480 #endif
1481 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1482         {
1483                 I2C_BOARD_INFO("pmic-adp5520", 0x32),
1484                 .irq = IRQ_PG0,
1485                 .platform_data = (void *)&adp5520_pdev_data,
1486         },
1487 #endif
1488 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
1489         {
1490                 I2C_BOARD_INFO("adxl34x", 0x53),
1491                 .irq = IRQ_PG3,
1492                 .platform_data = (void *)&adxl34x_info,
1493         },
1494 #endif
1495 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
1496         {
1497                 I2C_BOARD_INFO("adp5588-gpio", 0x34),
1498                 .platform_data = (void *)&adp5588_gpio_data,
1499         },
1500 #endif
1501 };
1502
1503 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1504 static struct platform_device bfin_sport0_uart_device = {
1505         .name = "bfin-sport-uart",
1506         .id = 0,
1507 };
1508
1509 static struct platform_device bfin_sport1_uart_device = {
1510         .name = "bfin-sport-uart",
1511         .id = 1,
1512 };
1513 #endif
1514
1515 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
1516 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
1517 /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
1518
1519 #ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
1520 #define PATA_INT        IRQ_PF5
1521 static struct pata_platform_info bfin_pata_platform_data = {
1522         .ioport_shift = 1,
1523         .irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
1524 };
1525
1526 static struct resource bfin_pata_resources[] = {
1527         {
1528                 .start = 0x20314020,
1529                 .end = 0x2031403F,
1530                 .flags = IORESOURCE_MEM,
1531         },
1532         {
1533                 .start = 0x2031401C,
1534                 .end = 0x2031401F,
1535                 .flags = IORESOURCE_MEM,
1536         },
1537         {
1538                 .start = PATA_INT,
1539                 .end = PATA_INT,
1540                 .flags = IORESOURCE_IRQ,
1541         },
1542 };
1543 #elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
1544 static struct pata_platform_info bfin_pata_platform_data = {
1545         .ioport_shift = 0,
1546 };
1547 /* CompactFlash Storage Card Memory Mapped Adressing
1548  * /REG = A11 = 1
1549  */
1550 static struct resource bfin_pata_resources[] = {
1551         {
1552                 .start = 0x20211800,
1553                 .end = 0x20211807,
1554                 .flags = IORESOURCE_MEM,
1555         },
1556         {
1557                 .start = 0x2021180E,    /* Device Ctl */
1558                 .end = 0x2021180E,
1559                 .flags = IORESOURCE_MEM,
1560         },
1561 };
1562 #endif
1563
1564 static struct platform_device bfin_pata_device = {
1565         .name = "pata_platform",
1566         .id = -1,
1567         .num_resources = ARRAY_SIZE(bfin_pata_resources),
1568         .resource = bfin_pata_resources,
1569         .dev = {
1570                 .platform_data = &bfin_pata_platform_data,
1571         }
1572 };
1573 #endif
1574
1575 static const unsigned int cclk_vlev_datasheet[] =
1576 {
1577         VRPAIR(VLEV_085, 250000000),
1578         VRPAIR(VLEV_090, 376000000),
1579         VRPAIR(VLEV_095, 426000000),
1580         VRPAIR(VLEV_100, 426000000),
1581         VRPAIR(VLEV_105, 476000000),
1582         VRPAIR(VLEV_110, 476000000),
1583         VRPAIR(VLEV_115, 476000000),
1584         VRPAIR(VLEV_120, 500000000),
1585         VRPAIR(VLEV_125, 533000000),
1586         VRPAIR(VLEV_130, 600000000),
1587 };
1588
1589 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1590         .tuple_tab = cclk_vlev_datasheet,
1591         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1592         .vr_settling_time = 25 /* us */,
1593 };
1594
1595 static struct platform_device bfin_dpmc = {
1596         .name = "bfin dpmc",
1597         .dev = {
1598                 .platform_data = &bfin_dmpc_vreg_data,
1599         },
1600 };
1601
1602 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1603 static struct platform_device bfin_tdm = {
1604         .name = "bfin-tdm",
1605         /* TODO: add platform data here */
1606 };
1607 #endif
1608
1609 static struct platform_device *stamp_devices[] __initdata = {
1610
1611         &bfin_dpmc,
1612
1613 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
1614         &bfin_pcmcia_cf_device,
1615 #endif
1616
1617 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1618         &rtc_device,
1619 #endif
1620
1621 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
1622         &sl811_hcd_device,
1623 #endif
1624
1625 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
1626         &isp1362_hcd_device,
1627 #endif
1628
1629 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1630         &bfin_isp1760_device,
1631 #endif
1632
1633 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
1634         &smc91x_device,
1635 #endif
1636
1637 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
1638         &dm9000_device,
1639 #endif
1640
1641 #if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
1642         &ax88180_device,
1643 #endif
1644
1645 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
1646         &bfin_mii_bus,
1647         &bfin_mac_device,
1648 #endif
1649
1650 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
1651         &net2272_bfin_device,
1652 #endif
1653
1654 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1655         &bfin_spi0_device,
1656 #endif
1657
1658 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
1659         &bfin_sport_spi0_device,
1660         &bfin_sport_spi1_device,
1661 #endif
1662
1663 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
1664         &bfin_fb_device,
1665 #endif
1666
1667 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1668         &bfin_lq035q1_device,
1669 #endif
1670
1671 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
1672         &bfin_fb_adv7393_device,
1673 #endif
1674
1675 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1676         &bfin_uart_device,
1677 #endif
1678
1679 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1680 #ifdef CONFIG_BFIN_SIR0
1681         &bfin_sir0_device,
1682 #endif
1683 #ifdef CONFIG_BFIN_SIR1
1684         &bfin_sir1_device,
1685 #endif
1686 #endif
1687
1688 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1689         &i2c_bfin_twi_device,
1690 #endif
1691
1692 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1693         &bfin_sport0_uart_device,
1694         &bfin_sport1_uart_device,
1695 #endif
1696
1697 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
1698         &bfin_pata_device,
1699 #endif
1700
1701 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1702         &bfin_device_gpiokeys,
1703 #endif
1704
1705         &bfin_gpios_device,
1706
1707 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
1708         &bfin_async_nand_device,
1709 #endif
1710
1711 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1712         &stamp_flash_device,
1713 #endif
1714
1715 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1716         &bfin_tdm,
1717 #endif
1718 };
1719
1720 static int __init stamp_init(void)
1721 {
1722         printk(KERN_INFO "%s(): registering device resources\n", __func__);
1723         i2c_register_board_info(0, bfin_i2c_board_info,
1724                                 ARRAY_SIZE(bfin_i2c_board_info));
1725         bfin_plat_nand_init();
1726         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
1727         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1728
1729         return 0;
1730 }
1731
1732 arch_initcall(stamp_init);
1733
1734 void native_machine_restart(char *cmd)
1735 {
1736         /* workaround reboot hang when booting from SPI */
1737         if ((bfin_read_SYSCR() & 0x7) == 0x3)
1738                 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
1739 }
1740
1741 /*
1742  * Currently the MAC address is saved in Flash by U-Boot
1743  */
1744 #define FLASH_MAC       0x203f0000
1745 void bfin_get_ether_addr(char *addr)
1746 {
1747         *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
1748         *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
1749 }
1750 EXPORT_SYMBOL(bfin_get_ether_addr);