arch/blackfin/mach-bf537/boards/stamp.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *                2005 National ICT Australia (NICTA)
   4  *                      Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <linux/device.h>
  10 #include <linux/export.h>
  11 #include <linux/kernel.h>
  12 #include <linux/platform_device.h>
  13 #include <linux/io.h>
  14 #include <linux/mtd/mtd.h>
  15 #include <linux/mtd/rawnand.h>
  16 #include <linux/mtd/partitions.h>
  17 #include <linux/mtd/plat-ram.h>
  18 #include <linux/mtd/physmap.h>
  19 #include <linux/spi/spi.h>
  20 #include <linux/spi/flash.h>
  21 #if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
  22 #include <linux/usb/isp1362.h>
  23 #endif
  24 #include <linux/i2c.h>
  25 #include <linux/platform_data/adp5588.h>
  26 #include <linux/etherdevice.h>
  27 #include <linux/ata_platform.h>
  28 #include <linux/irq.h>
  29 #include <linux/interrupt.h>
  30 #include <linux/usb/sl811.h>
  31 #include <linux/spi/mmc_spi.h>
  32 #include <linux/leds.h>
  33 #include <linux/input.h>
  34 #include <asm/dma.h>
  35 #include <asm/bfin5xx_spi.h>
  36 #include <asm/reboot.h>
  37 #include <asm/portmux.h>
  38 #include <asm/dpmc.h>
  39 #include <asm/bfin_sport.h>
  40 #ifdef CONFIG_REGULATOR_FIXED_VOLTAGE
  41 #include <linux/regulator/fixed.h>
  42 #endif
  43 #include <linux/regulator/machine.h>
  44 #include <linux/regulator/consumer.h>
  45 #include <linux/regulator/userspace-consumer.h>
  46
  47 /*
  48  * Name the Board for the /proc/cpuinfo
  49  */
  50 const char bfin_board_name[] = "ADI BF537-STAMP";
  51
  52 /*
  53  *  Driver needs to know address, irq and flag pin.
  54  */
  55
  56 #if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
  57 #include <linux/usb/isp1760.h>
  58 static struct resource bfin_isp1760_resources[] = {
  59         [0] = {
  60                 .start  = 0x203C0000,
  61                 .end    = 0x203C0000 + 0x000fffff,
  62                 .flags  = IORESOURCE_MEM,
  63         },
  64         [1] = {
  65                 .start  = IRQ_PF7,
  66                 .end    = IRQ_PF7,
  67                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
  68         },
  69 };
  70
  71 static struct isp1760_platform_data isp1760_priv = {
  72         .is_isp1761 = 0,
  73         .bus_width_16 = 1,
  74         .port1_otg = 0,
  75         .analog_oc = 0,
  76         .dack_polarity_high = 0,
  77         .dreq_polarity_high = 0,
  78 };
  79
  80 static struct platform_device bfin_isp1760_device = {
  81         .name           = "isp1760",
  82         .id             = 0,
  83         .dev = {
  84                 .platform_data = &isp1760_priv,
  85         },
  86         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  87         .resource       = bfin_isp1760_resources,
  88 };
  89 #endif
  90
  91 #if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
  92 #include <linux/gpio_keys.h>
  93
  94 static struct gpio_keys_button bfin_gpio_keys_table[] = {
  95         {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
  96         {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"},
  97         {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"},
  98         {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"},
  99 };
 100
 101 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
 102         .buttons        = bfin_gpio_keys_table,
 103         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
 104 };
 105
 106 static struct platform_device bfin_device_gpiokeys = {
 107         .name      = "gpio-keys",
 108         .dev = {
 109                 .platform_data = &bfin_gpio_keys_data,
 110         },
 111 };
 112 #endif
 113
 114 #if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
 115 static struct resource bfin_pcmcia_cf_resources[] = {
 116         {
 117                 .start = 0x20310000, /* IO PORT */
 118                 .end = 0x20312000,
 119                 .flags = IORESOURCE_MEM,
 120         }, {
 121                 .start = 0x20311000, /* Attribute Memory */
 122                 .end = 0x20311FFF,
 123                 .flags = IORESOURCE_MEM,
 124         }, {
 125                 .start = IRQ_PF4,
 126                 .end = IRQ_PF4,
 127                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 128         }, {
 129                 .start = 6, /* Card Detect PF6 */
 130                 .end = 6,
 131                 .flags = IORESOURCE_IRQ,
 132         },
 133 };
 134
 135 static struct platform_device bfin_pcmcia_cf_device = {
 136         .name = "bfin_cf_pcmcia",
 137         .id = -1,
 138         .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
 139         .resource = bfin_pcmcia_cf_resources,
 140 };
 141 #endif
 142
 143 #if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 144 static struct platform_device rtc_device = {
 145         .name = "rtc-bfin",
 146         .id   = -1,
 147 };
 148 #endif
 149
 150 #if IS_ENABLED(CONFIG_SMC91X)
 151 #include <linux/smc91x.h>
 152
 153 static struct smc91x_platdata smc91x_info = {
 154         .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 155         .leda = RPC_LED_100_10,
 156         .ledb = RPC_LED_TX_RX,
 157 };
 158
 159 static struct resource smc91x_resources[] = {
 160         {
 161                 .name = "smc91x-regs",
 162                 .start = 0x20300300,
 163                 .end = 0x20300300 + 16,
 164                 .flags = IORESOURCE_MEM,
 165         }, {
 166
 167                 .start = IRQ_PF7,
 168                 .end = IRQ_PF7,
 169                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 170         },
 171 };
 172 static struct platform_device smc91x_device = {
 173         .name = "smc91x",
 174         .id = 0,
 175         .num_resources = ARRAY_SIZE(smc91x_resources),
 176         .resource = smc91x_resources,
 177         .dev    = {
 178                 .platform_data  = &smc91x_info,
 179         },
 180 };
 181 #endif
 182
 183 #if IS_ENABLED(CONFIG_DM9000)
 184 static struct resource dm9000_resources[] = {
 185         [0] = {
 186                 .start  = 0x203FB800,
 187                 .end    = 0x203FB800 + 1,
 188                 .flags  = IORESOURCE_MEM,
 189         },
 190         [1] = {
 191                 .start  = 0x203FB804,
 192                 .end    = 0x203FB804 + 1,
 193                 .flags  = IORESOURCE_MEM,
 194         },
 195         [2] = {
 196                 .start  = IRQ_PF9,
 197                 .end    = IRQ_PF9,
 198                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
 199         },
 200 };
 201
 202 static struct platform_device dm9000_device = {
 203         .name           = "dm9000",
 204         .id             = -1,
 205         .num_resources  = ARRAY_SIZE(dm9000_resources),
 206         .resource       = dm9000_resources,
 207 };
 208 #endif
 209
 210 #if IS_ENABLED(CONFIG_USB_SL811_HCD)
 211 static struct resource sl811_hcd_resources[] = {
 212         {
 213                 .start = 0x20340000,
 214                 .end = 0x20340000,
 215                 .flags = IORESOURCE_MEM,
 216         }, {
 217                 .start = 0x20340004,
 218                 .end = 0x20340004,
 219                 .flags = IORESOURCE_MEM,
 220         }, {
 221                 .start = IRQ_PF4,
 222                 .end = IRQ_PF4,
 223                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 224         },
 225 };
 226
 227 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
 228 void sl811_port_power(struct device *dev, int is_on)
 229 {
 230         gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
 231         gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
 232 }
 233 #endif
 234
 235 static struct sl811_platform_data sl811_priv = {
 236         .potpg = 10,
 237         .power = 250,       /* == 500mA */
 238 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
 239         .port_power = &sl811_port_power,
 240 #endif
 241 };
 242
 243 static struct platform_device sl811_hcd_device = {
 244         .name = "sl811-hcd",
 245         .id = 0,
 246         .dev = {
 247                 .platform_data = &sl811_priv,
 248         },
 249         .num_resources = ARRAY_SIZE(sl811_hcd_resources),
 250         .resource = sl811_hcd_resources,
 251 };
 252 #endif
 253
 254 #if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 255 static struct resource isp1362_hcd_resources[] = {
 256         {
 257                 .start = 0x20360000,
 258                 .end = 0x20360000,
 259                 .flags = IORESOURCE_MEM,
 260         }, {
 261                 .start = 0x20360004,
 262                 .end = 0x20360004,
 263                 .flags = IORESOURCE_MEM,
 264         }, {
 265                 .start = IRQ_PF3,
 266                 .end = IRQ_PF3,
 267                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 268         },
 269 };
 270
 271 static struct isp1362_platform_data isp1362_priv = {
 272         .sel15Kres = 1,
 273         .clknotstop = 0,
 274         .oc_enable = 0,
 275         .int_act_high = 0,
 276         .int_edge_triggered = 0,
 277         .remote_wakeup_connected = 0,
 278         .no_power_switching = 1,
 279         .power_switching_mode = 0,
 280 };
 281
 282 static struct platform_device isp1362_hcd_device = {
 283         .name = "isp1362-hcd",
 284         .id = 0,
 285         .dev = {
 286                 .platform_data = &isp1362_priv,
 287         },
 288         .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
 289         .resource = isp1362_hcd_resources,
 290 };
 291 #endif
 292
 293 #if IS_ENABLED(CONFIG_CAN_BFIN)
 294 static unsigned short bfin_can_peripherals[] = {
 295         P_CAN0_RX, P_CAN0_TX, 0
 296 };
 297
 298 static struct resource bfin_can_resources[] = {
 299         {
 300                 .start = 0xFFC02A00,
 301                 .end = 0xFFC02FFF,
 302                 .flags = IORESOURCE_MEM,
 303         },
 304         {
 305                 .start = IRQ_CAN_RX,
 306                 .end = IRQ_CAN_RX,
 307                 .flags = IORESOURCE_IRQ,
 308         },
 309         {
 310                 .start = IRQ_CAN_TX,
 311                 .end = IRQ_CAN_TX,
 312                 .flags = IORESOURCE_IRQ,
 313         },
 314         {
 315                 .start = IRQ_CAN_ERROR,
 316                 .end = IRQ_CAN_ERROR,
 317                 .flags = IORESOURCE_IRQ,
 318         },
 319 };
 320
 321 static struct platform_device bfin_can_device = {
 322         .name = "bfin_can",
 323         .num_resources = ARRAY_SIZE(bfin_can_resources),
 324         .resource = bfin_can_resources,
 325         .dev = {
 326                 .platform_data = &bfin_can_peripherals, /* Passed to driver */
 327         },
 328 };
 329 #endif
 330
 331 #if IS_ENABLED(CONFIG_BFIN_MAC)
 332 #include <linux/bfin_mac.h>
 333 static const unsigned short bfin_mac_peripherals[] = P_MII0;
 334
 335 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
 336         {
 337                 .addr = 1,
 338                 .irq = PHY_POLL, /* IRQ_MAC_PHYINT */
 339         },
 340 };
 341
 342 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
 343         .phydev_number = 1,
 344         .phydev_data = bfin_phydev_data,
 345         .phy_mode = PHY_INTERFACE_MODE_MII,
 346         .mac_peripherals = bfin_mac_peripherals,
 347 };
 348
 349 static struct platform_device bfin_mii_bus = {
 350         .name = "bfin_mii_bus",
 351         .dev = {
 352                 .platform_data = &bfin_mii_bus_data,
 353         }
 354 };
 355
 356 static struct platform_device bfin_mac_device = {
 357         .name = "bfin_mac",
 358         .dev = {
 359                 .platform_data = &bfin_mii_bus,
 360         }
 361 };
 362 #endif
 363
 364 #if IS_ENABLED(CONFIG_USB_NET2272)
 365 static struct resource net2272_bfin_resources[] = {
 366         {
 367                 .start = 0x20300000,
 368                 .end = 0x20300000 + 0x100,
 369                 .flags = IORESOURCE_MEM,
 370         }, {
 371                 .start = 1,
 372                 .flags = IORESOURCE_BUS,
 373         }, {
 374                 .start = IRQ_PF7,
 375                 .end = IRQ_PF7,
 376                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 377         },
 378 };
 379
 380 static struct platform_device net2272_bfin_device = {
 381         .name = "net2272",
 382         .id = -1,
 383         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 384         .resource = net2272_bfin_resources,
 385 };
 386 #endif
 387
 388 #if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
 389 const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
 390
 391 static struct mtd_partition bfin_plat_nand_partitions[] = {
 392         {
 393                 .name   = "linux kernel(nand)",
 394                 .size   = 0x400000,
 395                 .offset = 0,
 396         }, {
 397                 .name   = "file system(nand)",
 398                 .size   = MTDPART_SIZ_FULL,
 399                 .offset = MTDPART_OFS_APPEND,
 400         },
 401 };
 402
 403 #define BFIN_NAND_PLAT_CLE 2
 404 #define BFIN_NAND_PLAT_ALE 1
 405 static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 406 {
 407         struct nand_chip *this = mtd_to_nand(mtd);
 408
 409         if (cmd == NAND_CMD_NONE)
 410                 return;
 411
 412         if (ctrl & NAND_CLE)
 413                 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
 414         else
 415                 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
 416 }
 417
 418 #define BFIN_NAND_PLAT_READY GPIO_PF3
 419 static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
 420 {
 421         return gpio_get_value(BFIN_NAND_PLAT_READY);
 422 }
 423
 424 static struct platform_nand_data bfin_plat_nand_data = {
 425         .chip = {
 426                 .nr_chips = 1,
 427                 .chip_delay = 30,
 428                 .part_probe_types = part_probes,
 429                 .partitions = bfin_plat_nand_partitions,
 430                 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
 431         },
 432         .ctrl = {
 433                 .cmd_ctrl  = bfin_plat_nand_cmd_ctrl,
 434                 .dev_ready = bfin_plat_nand_dev_ready,
 435         },
 436 };
 437
 438 #define MAX(x, y) (x > y ? x : y)
 439 static struct resource bfin_plat_nand_resources = {
 440         .start = 0x20212000,
 441         .end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
 442         .flags = IORESOURCE_MEM,
 443 };
 444
 445 static struct platform_device bfin_async_nand_device = {
 446         .name = "gen_nand",
 447         .id = -1,
 448         .num_resources = 1,
 449         .resource = &bfin_plat_nand_resources,
 450         .dev = {
 451                 .platform_data = &bfin_plat_nand_data,
 452         },
 453 };
 454
 455 static void bfin_plat_nand_init(void)
 456 {
 457         gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
 458         gpio_direction_input(BFIN_NAND_PLAT_READY);
 459 }
 460 #else
 461 static void bfin_plat_nand_init(void) {}
 462 #endif
 463
 464 #if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 465 static struct mtd_partition stamp_partitions[] = {
 466         {
 467                 .name       = "bootloader(nor)",
 468                 .size       = 0x40000,
 469                 .offset     = 0,
 470         }, {
 471                 .name       = "linux kernel(nor)",
 472                 .size       = 0x180000,
 473                 .offset     = MTDPART_OFS_APPEND,
 474         }, {
 475                 .name       = "file system(nor)",
 476                 .size       = 0x400000 - 0x40000 - 0x180000 - 0x10000,
 477                 .offset     = MTDPART_OFS_APPEND,
 478         }, {
 479                 .name       = "MAC Address(nor)",
 480                 .size       = MTDPART_SIZ_FULL,
 481                 .offset     = 0x3F0000,
 482                 .mask_flags = MTD_WRITEABLE,
 483         }
 484 };
 485
 486 static struct physmap_flash_data stamp_flash_data = {
 487         .width      = 2,
 488         .parts      = stamp_partitions,
 489         .nr_parts   = ARRAY_SIZE(stamp_partitions),
 490 #ifdef CONFIG_ROMKERNEL
 491         .probe_type = "map_rom",
 492 #endif
 493 };
 494
 495 static struct resource stamp_flash_resource = {
 496         .start = 0x20000000,
 497         .end   = 0x203fffff,
 498         .flags = IORESOURCE_MEM,
 499 };
 500
 501 static struct platform_device stamp_flash_device = {
 502         .name          = "physmap-flash",
 503         .id            = 0,
 504         .dev = {
 505                 .platform_data = &stamp_flash_data,
 506         },
 507         .num_resources = 1,
 508         .resource      = &stamp_flash_resource,
 509 };
 510 #endif
 511
 512 #if IS_ENABLED(CONFIG_MTD_M25P80)
 513 static struct mtd_partition bfin_spi_flash_partitions[] = {
 514         {
 515                 .name = "bootloader(spi)",
 516                 .size = 0x00040000,
 517                 .offset = 0,
 518                 .mask_flags = MTD_CAP_ROM
 519         }, {
 520                 .name = "linux kernel(spi)",
 521                 .size = 0x180000,
 522                 .offset = MTDPART_OFS_APPEND,
 523         }, {
 524                 .name = "file system(spi)",
 525                 .size = MTDPART_SIZ_FULL,
 526                 .offset = MTDPART_OFS_APPEND,
 527         }
 528 };
 529
 530 static struct flash_platform_data bfin_spi_flash_data = {
 531         .name = "m25p80",
 532         .parts = bfin_spi_flash_partitions,
 533         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 534         /* .type = "m25p64", */
 535 };
 536
 537 /* SPI flash chip (m25p64) */
 538 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 539         .enable_dma = 0,         /* use dma transfer with this chip*/
 540 };
 541 #endif
 542
 543 #if IS_ENABLED(CONFIG_INPUT_AD714X_SPI)
 544 #include <linux/input/ad714x.h>
 545
 546 static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
 547         {
 548                 .start_stage = 0,
 549                 .end_stage = 7,
 550                 .max_coord = 128,
 551         },
 552 };
 553
 554 static struct ad714x_button_plat ad7147_spi_button_plat[] = {
 555         {
 556                 .keycode = BTN_FORWARD,
 557                 .l_mask = 0,
 558                 .h_mask = 0x600,
 559         },
 560         {
 561                 .keycode = BTN_LEFT,
 562                 .l_mask = 0,
 563                 .h_mask = 0x500,
 564         },
 565         {
 566                 .keycode = BTN_MIDDLE,
 567                 .l_mask = 0,
 568                 .h_mask = 0x800,
 569         },
 570         {
 571                 .keycode = BTN_RIGHT,
 572                 .l_mask = 0x100,
 573                 .h_mask = 0x400,
 574         },
 575         {
 576                 .keycode = BTN_BACK,
 577                 .l_mask = 0x200,
 578                 .h_mask = 0x400,
 579         },
 580 };
 581 static struct ad714x_platform_data ad7147_spi_platform_data = {
 582         .slider_num = 1,
 583         .button_num = 5,
 584         .slider = ad7147_spi_slider_plat,
 585         .button = ad7147_spi_button_plat,
 586         .stage_cfg_reg =  {
 587                 {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
 588                 {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
 589                 {0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
 590                 {0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
 591                 {0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
 592                 {0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
 593                 {0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
 594                 {0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
 595                 {0xFF7B, 0x3FFF, 0x506,  0x2626, 1100, 1100, 1150, 1150},
 596                 {0xFDFE, 0x3FFF, 0x606,  0x2626, 1100, 1100, 1150, 1150},
 597                 {0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
 598                 {0xFFEF, 0x1FFF, 0x0,    0x2626, 1100, 1100, 1150, 1150},
 599         },
 600         .sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
 601 };
 602 #endif
 603
 604 #if IS_ENABLED(CONFIG_INPUT_AD714X_I2C)
 605 #include <linux/input/ad714x.h>
 606 static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
 607         {
 608                 .keycode = BTN_1,
 609                 .l_mask = 0,
 610                 .h_mask = 0x1,
 611         },
 612         {
 613                 .keycode = BTN_2,
 614                 .l_mask = 0,
 615                 .h_mask = 0x2,
 616         },
 617         {
 618                 .keycode = BTN_3,
 619                 .l_mask = 0,
 620                 .h_mask = 0x4,
 621         },
 622         {
 623                 .keycode = BTN_4,
 624                 .l_mask = 0x0,
 625                 .h_mask = 0x8,
 626         },
 627 };
 628 static struct ad714x_platform_data ad7142_i2c_platform_data = {
 629         .button_num = 4,
 630         .button = ad7142_i2c_button_plat,
 631         .stage_cfg_reg =  {
 632                 /* fixme: figure out right setting for all comoponent according
 633                  * to hardware feature of EVAL-AD7142EB board */
 634                 {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 635                 {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 636                 {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 637                 {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 638                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 639                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 640                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 641                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 642                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 643                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 644                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 645                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 646         },
 647         .sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
 648 };
 649 #endif
 650
 651 #if IS_ENABLED(CONFIG_AD2S90)
 652 static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
 653         .enable_dma = 0,
 654 };
 655 #endif
 656
 657 #if IS_ENABLED(CONFIG_AD2S1200)
 658 static unsigned short ad2s1200_platform_data[] = {
 659         /* used as SAMPLE and RDVEL */
 660         GPIO_PF5, GPIO_PF6, 0
 661 };
 662
 663 static struct bfin5xx_spi_chip ad2s1200_spi_chip_info = {
 664         .enable_dma = 0,
 665 };
 666 #endif
 667
 668 #if IS_ENABLED(CONFIG_AD2S1210)
 669 static unsigned short ad2s1210_platform_data[] = {
 670         /* use as SAMPLE, A0, A1 */
 671         GPIO_PF7, GPIO_PF8, GPIO_PF9,
 672 # if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT)
 673         /* the RES0 and RES1 pins */
 674         GPIO_PF4, GPIO_PF5,
 675 # endif
 676         0,
 677 };
 678
 679 static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
 680         .enable_dma = 0,
 681 };
 682 #endif
 683
 684 #if IS_ENABLED(CONFIG_SENSORS_AD7314)
 685 static struct bfin5xx_spi_chip ad7314_spi_chip_info = {
 686         .enable_dma = 0,
 687 };
 688 #endif
 689
 690 #if IS_ENABLED(CONFIG_AD7816)
 691 static unsigned short ad7816_platform_data[] = {
 692         GPIO_PF4, /* rdwr_pin */
 693         GPIO_PF5, /* convert_pin */
 694         GPIO_PF7, /* busy_pin */
 695         0,
 696 };
 697
 698 static struct bfin5xx_spi_chip ad7816_spi_chip_info = {
 699         .enable_dma = 0,
 700 };
 701 #endif
 702
 703 #if IS_ENABLED(CONFIG_ADT7310)
 704 static unsigned long adt7310_platform_data[3] = {
 705 /* INT bound temperature alarm event. line 1 */
 706         IRQ_PG4, IRQF_TRIGGER_LOW,
 707 /* CT bound temperature alarm event irq_flags. line 0 */
 708         IRQF_TRIGGER_LOW,
 709 };
 710
 711 static struct bfin5xx_spi_chip adt7310_spi_chip_info = {
 712         .enable_dma = 0,
 713 };
 714 #endif
 715
 716 #if IS_ENABLED(CONFIG_AD7298)
 717 static unsigned short ad7298_platform_data[] = {
 718         GPIO_PF7, /* busy_pin */
 719         0,
 720 };
 721 #endif
 722
 723 #if IS_ENABLED(CONFIG_ADT7316_SPI)
 724 static unsigned long adt7316_spi_data[2] = {
 725         IRQF_TRIGGER_LOW, /* interrupt flags */
 726         GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
 727 };
 728
 729 static struct bfin5xx_spi_chip adt7316_spi_chip_info = {
 730         .enable_dma = 0,
 731 };
 732 #endif
 733
 734 #if IS_ENABLED(CONFIG_MMC_SPI)
 735 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
 736
 737 static int bfin_mmc_spi_init(struct device *dev,
 738         irqreturn_t (*detect_int)(int, void *), void *data)
 739 {
 740         return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
 741                 IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
 742 }
 743
 744 static void bfin_mmc_spi_exit(struct device *dev, void *data)
 745 {
 746         free_irq(MMC_SPI_CARD_DETECT_INT, data);
 747 }
 748
 749 static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
 750         .init = bfin_mmc_spi_init,
 751         .exit = bfin_mmc_spi_exit,
 752         .detect_delay = 100, /* msecs */
 753 };
 754
 755 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 756         .enable_dma = 0,
 757         .pio_interrupt = 0,
 758 };
 759 #endif
 760
 761 #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 762 #include <linux/spi/ad7877.h>
 763 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 764         .model                  = 7877,
 765         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 766         .x_plate_ohms           = 419,
 767         .y_plate_ohms           = 486,
 768         .pressure_max           = 1000,
 769         .pressure_min           = 0,
 770         .stopacq_polarity       = 1,
 771         .first_conversion_delay = 3,
 772         .acquisition_time       = 1,
 773         .averaging              = 1,
 774         .pen_down_acc_interval  = 1,
 775 };
 776 #endif
 777
 778 #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
 779 #include <linux/platform_data/ad7879.h>
 780 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 781         .model                  = 7879, /* Model = AD7879 */
 782         .x_plate_ohms           = 620,  /* 620 Ohm from the touch datasheet */
 783         .pressure_max           = 10000,
 784         .pressure_min           = 0,
 785         .first_conversion_delay = 3,    /* wait 512us before do a first conversion */
 786         .acquisition_time       = 1,    /* 4us acquisition time per sample */
 787         .median                 = 2,    /* do 8 measurements */
 788         .averaging              = 1,    /* take the average of 4 middle samples */
 789         .pen_down_acc_interval  = 255,  /* 9.4 ms */
 790         .gpio_export            = 1,    /* Export GPIO to gpiolib */
 791         .gpio_base              = -1,   /* Dynamic allocation */
 792 };
 793 #endif
 794
 795 #if IS_ENABLED(CONFIG_INPUT_ADXL34X)
 796 #include <linux/input/adxl34x.h>
 797 static const struct adxl34x_platform_data adxl34x_info = {
 798         .x_axis_offset = 0,
 799         .y_axis_offset = 0,
 800         .z_axis_offset = 0,
 801         .tap_threshold = 0x31,
 802         .tap_duration = 0x10,
 803         .tap_latency = 0x60,
 804         .tap_window = 0xF0,
 805         .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
 806         .act_axis_control = 0xFF,
 807         .activity_threshold = 5,
 808         .inactivity_threshold = 3,
 809         .inactivity_time = 4,
 810         .free_fall_threshold = 0x7,
 811         .free_fall_time = 0x20,
 812         .data_rate = 0x8,
 813         .data_range = ADXL_FULL_RES,
 814
 815         .ev_type = EV_ABS,
 816         .ev_code_x = ABS_X,             /* EV_REL */
 817         .ev_code_y = ABS_Y,             /* EV_REL */
 818         .ev_code_z = ABS_Z,             /* EV_REL */
 819
 820         .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
 821
 822 /*      .ev_code_ff = KEY_F,*/          /* EV_KEY */
 823 /*      .ev_code_act_inactivity = KEY_A,*/      /* EV_KEY */
 824         .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
 825         .fifo_mode = ADXL_FIFO_STREAM,
 826         .orientation_enable = ADXL_EN_ORIENTATION_3D,
 827         .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
 828         .divisor_length =  ADXL_LP_FILTER_DIVISOR_16,
 829         /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
 830         .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
 831 };
 832 #endif
 833
 834 #if IS_ENABLED(CONFIG_ENC28J60)
 835 static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
 836         .enable_dma     = 1,
 837 };
 838 #endif
 839
 840 #if IS_ENABLED(CONFIG_ADF702X)
 841 #include <linux/spi/adf702x.h>
 842 #define TXREG 0x0160A470
 843 static const u32 adf7021_regs[] = {
 844         0x09608FA0,
 845         0x00575011,
 846         0x00A7F092,
 847         0x2B141563,
 848         0x81F29E94,
 849         0x00003155,
 850         0x050A4F66,
 851         0x00000007,
 852         0x00000008,
 853         0x000231E9,
 854         0x3296354A,
 855         0x891A2B3B,
 856         0x00000D9C,
 857         0x0000000D,
 858         0x0000000E,
 859         0x0000000F,
 860 };
 861
 862 static struct adf702x_platform_data adf7021_platform_data = {
 863         .regs_base = (void *)SPORT1_TCR1,
 864         .dma_ch_rx = CH_SPORT1_RX,
 865         .dma_ch_tx = CH_SPORT1_TX,
 866         .irq_sport_err = IRQ_SPORT1_ERROR,
 867         .gpio_int_rfs = GPIO_PF8,
 868         .pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI,
 869                         P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0},
 870         .adf702x_model = MODEL_ADF7021,
 871         .adf702x_regs = adf7021_regs,
 872         .tx_reg = TXREG,
 873 };
 874 static inline void adf702x_mac_init(void)
 875 {
 876         eth_random_addr(adf7021_platform_data.mac_addr);
 877 }
 878 #else
 879 static inline void adf702x_mac_init(void) {}
 880 #endif
 881
 882 #if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
 883 #include <linux/spi/ads7846.h>
 884 static int ads7873_get_pendown_state(void)
 885 {
 886         return gpio_get_value(GPIO_PF6);
 887 }
 888
 889 static struct ads7846_platform_data __initdata ad7873_pdata = {
 890         .model          = 7873,         /* AD7873 */
 891         .x_max          = 0xfff,
 892         .y_max          = 0xfff,
 893         .x_plate_ohms   = 620,
 894         .debounce_max   = 1,
 895         .debounce_rep   = 0,
 896         .debounce_tol   = (~0),
 897         .get_pendown_state = ads7873_get_pendown_state,
 898 };
 899 #endif
 900
 901 #if IS_ENABLED(CONFIG_MTD_DATAFLASH)
 902
 903 static struct mtd_partition bfin_spi_dataflash_partitions[] = {
 904         {
 905                 .name = "bootloader(spi)",
 906                 .size = 0x00040000,
 907                 .offset = 0,
 908                 .mask_flags = MTD_CAP_ROM
 909         }, {
 910                 .name = "linux kernel(spi)",
 911                 .size = 0x180000,
 912                 .offset = MTDPART_OFS_APPEND,
 913         }, {
 914                 .name = "file system(spi)",
 915                 .size = MTDPART_SIZ_FULL,
 916                 .offset = MTDPART_OFS_APPEND,
 917         }
 918 };
 919
 920 static struct flash_platform_data bfin_spi_dataflash_data = {
 921         .name = "SPI Dataflash",
 922         .parts = bfin_spi_dataflash_partitions,
 923         .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
 924 };
 925
 926 /* DataFlash chip */
 927 static struct bfin5xx_spi_chip data_flash_chip_info = {
 928         .enable_dma = 0,         /* use dma transfer with this chip*/
 929 };
 930 #endif
 931
 932 #if IS_ENABLED(CONFIG_AD7476)
 933 static struct bfin5xx_spi_chip spi_ad7476_chip_info = {
 934         .enable_dma = 0,         /* use dma transfer with this chip*/
 935 };
 936 #endif
 937
 938 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 939 #if IS_ENABLED(CONFIG_MTD_M25P80)
 940         {
 941                 /* the modalias must be the same as spi device driver name */
 942                 .modalias = "m25p80", /* Name of spi_driver for this device */
 943                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 944                 .bus_num = 0, /* Framework bus number */
 945                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 946                 .platform_data = &bfin_spi_flash_data,
 947                 .controller_data = &spi_flash_chip_info,
 948                 .mode = SPI_MODE_3,
 949         },
 950 #endif
 951 #if IS_ENABLED(CONFIG_MTD_DATAFLASH)
 952         {       /* DataFlash chip */
 953                 .modalias = "mtd_dataflash",
 954                 .max_speed_hz = 33250000,     /* max spi clock (SCK) speed in HZ */
 955                 .bus_num = 0, /* Framework bus number */
 956                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 957                 .platform_data = &bfin_spi_dataflash_data,
 958                 .controller_data = &data_flash_chip_info,
 959                 .mode = SPI_MODE_3,
 960         },
 961 #endif
 962
 963 #if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 964         {
 965                 .modalias = "ad1836",
 966                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 967                 .bus_num = 0,
 968                 .chip_select = 4,
 969                 .platform_data = "ad1836", /* only includes chip name for the moment */
 970                 .mode = SPI_MODE_3,
 971         },
 972 #endif
 973
 974 #ifdef CONFIG_SND_SOC_AD193X_SPI
 975         {
 976                 .modalias = "ad193x",
 977                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 978                 .bus_num = 0,
 979                 .chip_select = 5,
 980                 .mode = SPI_MODE_3,
 981         },
 982 #endif
 983
 984 #if IS_ENABLED(CONFIG_SND_SOC_ADAV80X)
 985         {
 986                 .modalias = "adav801",
 987                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 988                 .bus_num = 0,
 989                 .chip_select = 1,
 990                 .mode = SPI_MODE_3,
 991         },
 992 #endif
 993
 994 #if IS_ENABLED(CONFIG_INPUT_AD714X_SPI)
 995         {
 996                 .modalias = "ad714x_captouch",
 997                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
 998                 .irq = IRQ_PF4,
 999                 .bus_num = 0,
1000                 .chip_select = 5,
1001                 .mode = SPI_MODE_3,
1002                 .platform_data = &ad7147_spi_platform_data,
1003         },
1004 #endif
1005
1006 #if IS_ENABLED(CONFIG_AD2S90)
1007         {
1008                 .modalias = "ad2s90",
1009                 .bus_num = 0,
1010                 .chip_select = 3,            /* change it for your board */
1011                 .mode = SPI_MODE_3,
1012                 .platform_data = NULL,
1013                 .controller_data = &ad2s90_spi_chip_info,
1014         },
1015 #endif
1016
1017 #if IS_ENABLED(CONFIG_AD2S1200)
1018         {
1019                 .modalias = "ad2s1200",
1020                 .bus_num = 0,
1021                 .chip_select = 4,            /* CS, change it for your board */
1022                 .platform_data = ad2s1200_platform_data,
1023                 .controller_data = &ad2s1200_spi_chip_info,
1024         },
1025 #endif
1026
1027 #if IS_ENABLED(CONFIG_AD2S1210)
1028         {
1029                 .modalias = "ad2s1210",
1030                 .max_speed_hz = 8192000,
1031                 .bus_num = 0,
1032                 .chip_select = 4,            /* CS, change it for your board */
1033                 .platform_data = ad2s1210_platform_data,
1034                 .controller_data = &ad2s1210_spi_chip_info,
1035         },
1036 #endif
1037
1038 #if IS_ENABLED(CONFIG_SENSORS_AD7314)
1039         {
1040                 .modalias = "ad7314",
1041                 .max_speed_hz = 1000000,
1042                 .bus_num = 0,
1043                 .chip_select = 4,            /* CS, change it for your board */
1044                 .controller_data = &ad7314_spi_chip_info,
1045                 .mode = SPI_MODE_1,
1046         },
1047 #endif
1048
1049 #if IS_ENABLED(CONFIG_AD7816)
1050         {
1051                 .modalias = "ad7818",
1052                 .max_speed_hz = 1000000,
1053                 .bus_num = 0,
1054                 .chip_select = 4,            /* CS, change it for your board */
1055                 .platform_data = ad7816_platform_data,
1056                 .controller_data = &ad7816_spi_chip_info,
1057                 .mode = SPI_MODE_3,
1058         },
1059 #endif
1060
1061 #if IS_ENABLED(CONFIG_ADT7310)
1062         {
1063                 .modalias = "adt7310",
1064                 .max_speed_hz = 1000000,
1065                 .irq = IRQ_PG5,         /* CT alarm event. Line 0 */
1066                 .bus_num = 0,
1067                 .chip_select = 4,       /* CS, change it for your board */
1068                 .platform_data = adt7310_platform_data,
1069                 .controller_data = &adt7310_spi_chip_info,
1070                 .mode = SPI_MODE_3,
1071         },
1072 #endif
1073
1074 #if IS_ENABLED(CONFIG_AD7298)
1075         {
1076                 .modalias = "ad7298",
1077                 .max_speed_hz = 1000000,
1078                 .bus_num = 0,
1079                 .chip_select = 4,            /* CS, change it for your board */
1080                 .platform_data = ad7298_platform_data,
1081                 .mode = SPI_MODE_3,
1082         },
1083 #endif
1084
1085 #if IS_ENABLED(CONFIG_ADT7316_SPI)
1086         {
1087                 .modalias = "adt7316",
1088                 .max_speed_hz = 1000000,
1089                 .irq = IRQ_PG5,         /* interrupt line */
1090                 .bus_num = 0,
1091                 .chip_select = 4,       /* CS, change it for your board */
1092                 .platform_data = adt7316_spi_data,
1093                 .controller_data = &adt7316_spi_chip_info,
1094                 .mode = SPI_MODE_3,
1095         },
1096 #endif
1097
1098 #if IS_ENABLED(CONFIG_MMC_SPI)
1099         {
1100                 .modalias = "mmc_spi",
1101                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
1102                 .bus_num = 0,
1103                 .chip_select = 4,
1104                 .platform_data = &bfin_mmc_spi_pdata,
1105                 .controller_data = &mmc_spi_chip_info,
1106                 .mode = SPI_MODE_3,
1107         },
1108 #endif
1109 #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
1110         {
1111                 .modalias               = "ad7877",
1112                 .platform_data          = &bfin_ad7877_ts_info,
1113                 .irq                    = IRQ_PF6,
1114                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
1115                 .bus_num        = 0,
1116                 .chip_select  = 1,
1117         },
1118 #endif
1119 #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
1120         {
1121                 .modalias = "ad7879",
1122                 .platform_data = &bfin_ad7879_ts_info,
1123                 .irq = IRQ_PF7,
1124                 .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
1125                 .bus_num = 0,
1126                 .chip_select = 1,
1127                 .mode = SPI_CPHA | SPI_CPOL,
1128         },
1129 #endif
1130 #if IS_ENABLED(CONFIG_SPI_SPIDEV)
1131         {
1132                 .modalias = "spidev",
1133                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
1134                 .bus_num = 0,
1135                 .chip_select = 1,
1136         },
1137 #endif
1138 #if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
1139         {
1140                 .modalias = "bfin-lq035q1-spi",
1141                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
1142                 .bus_num = 0,
1143                 .chip_select = 2,
1144                 .mode = SPI_CPHA | SPI_CPOL,
1145         },
1146 #endif
1147 #if IS_ENABLED(CONFIG_ENC28J60)
1148         {
1149                 .modalias = "enc28j60",
1150                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
1151                 .irq = IRQ_PF6,
1152                 .bus_num = 0,
1153                 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1154                 .controller_data = &enc28j60_spi_chip_info,
1155                 .mode = SPI_MODE_0,
1156         },
1157 #endif
1158 #if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI)
1159         {
1160                 .modalias       = "adxl34x",
1161                 .platform_data  = &adxl34x_info,
1162                 .irq            = IRQ_PF6,
1163                 .max_speed_hz   = 5000000,    /* max spi clock (SCK) speed in HZ */
1164                 .bus_num        = 0,
1165                 .chip_select    = 2,
1166                 .mode = SPI_MODE_3,
1167         },
1168 #endif
1169 #if IS_ENABLED(CONFIG_ADF702X)
1170         {
1171                 .modalias = "adf702x",
1172                 .max_speed_hz = 16000000,     /* max spi clock (SCK) speed in HZ */
1173                 .bus_num = 0,
1174                 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1175                 .platform_data = &adf7021_platform_data,
1176                 .mode = SPI_MODE_0,
1177         },
1178 #endif
1179 #if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
1180         {
1181                 .modalias = "ads7846",
1182                 .max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
1183                 .bus_num = 0,
1184                 .irq = IRQ_PF6,
1185                 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1186                 .platform_data = &ad7873_pdata,
1187                 .mode = SPI_MODE_0,
1188         },
1189 #endif
1190 #if IS_ENABLED(CONFIG_AD7476)
1191         {
1192                 .modalias = "ad7476", /* Name of spi_driver for this device */
1193                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
1194                 .bus_num = 0, /* Framework bus number */
1195                 .chip_select = 1, /* Framework chip select. */
1196                 .platform_data = NULL, /* No spi_driver specific config */
1197                 .controller_data = &spi_ad7476_chip_info,
1198                 .mode = SPI_MODE_3,
1199         },
1200 #endif
1201 #if IS_ENABLED(CONFIG_ADE7753)
1202         {
1203                 .modalias = "ade7753",
1204                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1205                 .bus_num = 0,
1206                 .chip_select = 1, /* CS, change it for your board */
1207                 .platform_data = NULL, /* No spi_driver specific config */
1208                 .mode = SPI_MODE_1,
1209         },
1210 #endif
1211 #if IS_ENABLED(CONFIG_ADE7754)
1212         {
1213                 .modalias = "ade7754",
1214                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1215                 .bus_num = 0,
1216                 .chip_select = 1, /* CS, change it for your board */
1217                 .platform_data = NULL, /* No spi_driver specific config */
1218                 .mode = SPI_MODE_1,
1219         },
1220 #endif
1221 #if IS_ENABLED(CONFIG_ADE7758)
1222         {
1223                 .modalias = "ade7758",
1224                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1225                 .bus_num = 0,
1226                 .chip_select = 1, /* CS, change it for your board */
1227                 .platform_data = NULL, /* No spi_driver specific config */
1228                 .mode = SPI_MODE_1,
1229         },
1230 #endif
1231 #if IS_ENABLED(CONFIG_ADE7759)
1232         {
1233                 .modalias = "ade7759",
1234                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1235                 .bus_num = 0,
1236                 .chip_select = 1, /* CS, change it for your board */
1237                 .platform_data = NULL, /* No spi_driver specific config */
1238                 .mode = SPI_MODE_1,
1239         },
1240 #endif
1241 #if IS_ENABLED(CONFIG_ADE7854_SPI)
1242         {
1243                 .modalias = "ade7854",
1244                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1245                 .bus_num = 0,
1246                 .chip_select = 1, /* CS, change it for your board */
1247                 .platform_data = NULL, /* No spi_driver specific config */
1248                 .mode = SPI_MODE_3,
1249         },
1250 #endif
1251 #if IS_ENABLED(CONFIG_ADIS16060)
1252         {
1253                 .modalias = "adis16060_r",
1254                 .max_speed_hz = 2900000,     /* max spi clock (SCK) speed in HZ */
1255                 .bus_num = 0,
1256                 .chip_select = MAX_CTRL_CS + 1, /* CS for read, change it for your board */
1257                 .platform_data = NULL, /* No spi_driver specific config */
1258                 .mode = SPI_MODE_0,
1259         },
1260         {
1261                 .modalias = "adis16060_w",
1262                 .max_speed_hz = 2900000,     /* max spi clock (SCK) speed in HZ */
1263                 .bus_num = 0,
1264                 .chip_select = 2, /* CS for write, change it for your board */
1265                 .platform_data = NULL, /* No spi_driver specific config */
1266                 .mode = SPI_MODE_1,
1267         },
1268 #endif
1269 #if IS_ENABLED(CONFIG_ADIS16130)
1270         {
1271                 .modalias = "adis16130",
1272                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1273                 .bus_num = 0,
1274                 .chip_select = 1, /* CS for read, change it for your board */
1275                 .platform_data = NULL, /* No spi_driver specific config */
1276                 .mode = SPI_MODE_3,
1277         },
1278 #endif
1279 #if IS_ENABLED(CONFIG_ADIS16201)
1280         {
1281                 .modalias = "adis16201",
1282                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1283                 .bus_num = 0,
1284                 .chip_select = 5, /* CS, change it for your board */
1285                 .platform_data = NULL, /* No spi_driver specific config */
1286                 .mode = SPI_MODE_3,
1287                 .irq = IRQ_PF4,
1288         },
1289 #endif
1290 #if IS_ENABLED(CONFIG_ADIS16203)
1291         {
1292                 .modalias = "adis16203",
1293                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1294                 .bus_num = 0,
1295                 .chip_select = 5, /* CS, change it for your board */
1296                 .platform_data = NULL, /* No spi_driver specific config */
1297                 .mode = SPI_MODE_3,
1298                 .irq = IRQ_PF4,
1299         },
1300 #endif
1301 #if IS_ENABLED(CONFIG_ADIS16204)
1302         {
1303                 .modalias = "adis16204",
1304                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1305                 .bus_num = 0,
1306                 .chip_select = 5, /* CS, change it for your board */
1307                 .platform_data = NULL, /* No spi_driver specific config */
1308                 .mode = SPI_MODE_3,
1309                 .irq = IRQ_PF4,
1310         },
1311 #endif
1312 #if IS_ENABLED(CONFIG_ADIS16209)
1313         {
1314                 .modalias = "adis16209",
1315                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1316                 .bus_num = 0,
1317                 .chip_select = 5, /* CS, change it for your board */
1318                 .platform_data = NULL, /* No spi_driver specific config */
1319                 .mode = SPI_MODE_3,
1320                 .irq = IRQ_PF4,
1321         },
1322 #endif
1323 #if IS_ENABLED(CONFIG_ADIS16220)
1324         {
1325                 .modalias = "adis16220",
1326                 .max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
1327                 .bus_num = 0,
1328                 .chip_select = 5, /* CS, change it for your board */
1329                 .platform_data = NULL, /* No spi_driver specific config */
1330                 .mode = SPI_MODE_3,
1331                 .irq = IRQ_PF4,
1332         },
1333 #endif
1334 #if IS_ENABLED(CONFIG_ADIS16240)
1335         {
1336                 .modalias = "adis16240",
1337                 .max_speed_hz = 1500000,     /* max spi clock (SCK) speed in HZ */
1338                 .bus_num = 0,
1339                 .chip_select = 5, /* CS, change it for your board */
1340                 .platform_data = NULL, /* No spi_driver specific config */
1341                 .mode = SPI_MODE_3,
1342                 .irq = IRQ_PF4,
1343         },
1344 #endif
1345 #if IS_ENABLED(CONFIG_ADIS16260)
1346         {
1347                 .modalias = "adis16260",
1348                 .max_speed_hz = 1500000,     /* max spi clock (SCK) speed in HZ */
1349                 .bus_num = 0,
1350                 .chip_select = 5, /* CS, change it for your board */
1351                 .platform_data = NULL, /* No spi_driver specific config */
1352                 .mode = SPI_MODE_3,
1353                 .irq = IRQ_PF4,
1354         },
1355 #endif
1356 #if IS_ENABLED(CONFIG_ADIS16261)
1357         {
1358                 .modalias = "adis16261",
1359                 .max_speed_hz = 2500000,     /* max spi clock (SCK) speed in HZ */
1360                 .bus_num = 0,
1361                 .chip_select = 1, /* CS, change it for your board */
1362                 .platform_data = NULL, /* No spi_driver specific config */
1363                 .mode = SPI_MODE_3,
1364         },
1365 #endif
1366 #if IS_ENABLED(CONFIG_ADIS16300)
1367         {
1368                 .modalias = "adis16300",
1369                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1370                 .bus_num = 0,
1371                 .chip_select = 5, /* CS, change it for your board */
1372                 .platform_data = NULL, /* No spi_driver specific config */
1373                 .mode = SPI_MODE_3,
1374                 .irq = IRQ_PF4,
1375         },
1376 #endif
1377 #if IS_ENABLED(CONFIG_ADIS16350)
1378         {
1379                 .modalias = "adis16364",
1380                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1381                 .bus_num = 0,
1382                 .chip_select = 5, /* CS, change it for your board */
1383                 .platform_data = NULL, /* No spi_driver specific config */
1384                 .mode = SPI_MODE_3,
1385                 .irq = IRQ_PF4,
1386         },
1387 #endif
1388 #if IS_ENABLED(CONFIG_ADIS16400)
1389         {
1390                 .modalias = "adis16400",
1391                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1392                 .bus_num = 0,
1393                 .chip_select = 1, /* CS, change it for your board */
1394                 .platform_data = NULL, /* No spi_driver specific config */
1395                 .mode = SPI_MODE_3,
1396         },
1397 #endif
1398 };
1399
1400 #if IS_ENABLED(CONFIG_SPI_BFIN5XX)
1401 /* SPI controller data */
1402 static struct bfin5xx_spi_master bfin_spi0_info = {
1403         .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
1404         .enable_dma = 1,  /* master has the ability to do dma transfer */
1405         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
1406 };
1407
1408 /* SPI (0) */
1409 static struct resource bfin_spi0_resource[] = {
1410         [0] = {
1411                 .start = SPI0_REGBASE,
1412                 .end   = SPI0_REGBASE + 0xFF,
1413                 .flags = IORESOURCE_MEM,
1414                 },
1415         [1] = {
1416                 .start = CH_SPI,
1417                 .end   = CH_SPI,
1418                 .flags = IORESOURCE_DMA,
1419         },
1420         [2] = {
1421                 .start = IRQ_SPI,
1422                 .end   = IRQ_SPI,
1423                 .flags = IORESOURCE_IRQ,
1424         },
1425 };
1426
1427 static struct platform_device bfin_spi0_device = {
1428         .name = "bfin-spi",
1429         .id = 0, /* Bus number */
1430         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
1431         .resource = bfin_spi0_resource,
1432         .dev = {
1433                 .platform_data = &bfin_spi0_info, /* Passed to driver */
1434         },
1435 };
1436 #endif  /* spi master and devices */
1437
1438 #if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
1439
1440 /* SPORT SPI controller data */
1441 static struct bfin5xx_spi_master bfin_sport_spi0_info = {
1442         .num_chipselect = MAX_BLACKFIN_GPIOS,
1443         .enable_dma = 0,  /* master don't support DMA */
1444         .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
1445                 P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
1446 };
1447
1448 static struct resource bfin_sport_spi0_resource[] = {
1449         [0] = {
1450                 .start = SPORT0_TCR1,
1451                 .end   = SPORT0_TCR1 + 0xFF,
1452                 .flags = IORESOURCE_MEM,
1453                 },
1454         [1] = {
1455                 .start = IRQ_SPORT0_ERROR,
1456                 .end   = IRQ_SPORT0_ERROR,
1457                 .flags = IORESOURCE_IRQ,
1458                 },
1459 };
1460
1461 static struct platform_device bfin_sport_spi0_device = {
1462         .name = "bfin-sport-spi",
1463         .id = 1, /* Bus number */
1464         .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
1465         .resource = bfin_sport_spi0_resource,
1466         .dev = {
1467                 .platform_data = &bfin_sport_spi0_info, /* Passed to driver */
1468         },
1469 };
1470
1471 static struct bfin5xx_spi_master bfin_sport_spi1_info = {
1472         .num_chipselect = MAX_BLACKFIN_GPIOS,
1473         .enable_dma = 0,  /* master don't support DMA */
1474         .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
1475                 P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
1476 };
1477
1478 static struct resource bfin_sport_spi1_resource[] = {
1479         [0] = {
1480                 .start = SPORT1_TCR1,
1481                 .end   = SPORT1_TCR1 + 0xFF,
1482                 .flags = IORESOURCE_MEM,
1483                 },
1484         [1] = {
1485                 .start = IRQ_SPORT1_ERROR,
1486                 .end   = IRQ_SPORT1_ERROR,
1487                 .flags = IORESOURCE_IRQ,
1488                 },
1489 };
1490
1491 static struct platform_device bfin_sport_spi1_device = {
1492         .name = "bfin-sport-spi",
1493         .id = 2, /* Bus number */
1494         .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
1495         .resource = bfin_sport_spi1_resource,
1496         .dev = {
1497                 .platform_data = &bfin_sport_spi1_info, /* Passed to driver */
1498         },
1499 };
1500
1501 #endif  /* sport spi master and devices */
1502
1503 #if IS_ENABLED(CONFIG_FB_BF537_LQ035)
1504 static struct platform_device bfin_fb_device = {
1505         .name = "bf537_lq035",
1506 };
1507 #endif
1508
1509 #if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
1510 #include <asm/bfin-lq035q1.h>
1511
1512 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
1513         .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
1514         .ppi_mode = USE_RGB565_16_BIT_PPI,
1515         .use_bl = 0,    /* let something else control the LCD Blacklight */
1516         .gpio_bl = GPIO_PF7,
1517 };
1518
1519 static struct resource bfin_lq035q1_resources[] = {
1520         {
1521                 .start = IRQ_PPI_ERROR,
1522                 .end = IRQ_PPI_ERROR,
1523                 .flags = IORESOURCE_IRQ,
1524         },
1525 };
1526
1527 static struct platform_device bfin_lq035q1_device = {
1528         .name           = "bfin-lq035q1",
1529         .id             = -1,
1530         .num_resources  = ARRAY_SIZE(bfin_lq035q1_resources),
1531         .resource       = bfin_lq035q1_resources,
1532         .dev            = {
1533                 .platform_data = &bfin_lq035q1_data,
1534         },
1535 };
1536 #endif
1537
1538 #if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
1539 #include <linux/videodev2.h>
1540 #include <media/blackfin/bfin_capture.h>
1541 #include <media/blackfin/ppi.h>
1542
1543 static const unsigned short ppi_req[] = {
1544         P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
1545         P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
1546         P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
1547         0,
1548 };
1549
1550 static const struct ppi_info ppi_info = {
1551         .type = PPI_TYPE_PPI,
1552         .dma_ch = CH_PPI,
1553         .irq_err = IRQ_PPI_ERROR,
1554         .base = (void __iomem *)PPI_CONTROL,
1555         .pin_req = ppi_req,
1556 };
1557
1558 #if IS_ENABLED(CONFIG_VIDEO_VS6624)
1559 static struct v4l2_input vs6624_inputs[] = {
1560         {
1561                 .index = 0,
1562                 .name = "Camera",
1563                 .type = V4L2_INPUT_TYPE_CAMERA,
1564                 .std = V4L2_STD_UNKNOWN,
1565         },
1566 };
1567
1568 static struct bcap_route vs6624_routes[] = {
1569         {
1570                 .input = 0,
1571                 .output = 0,
1572         },
1573 };
1574
1575 static const unsigned vs6624_ce_pin = GPIO_PF10;
1576
1577 static struct bfin_capture_config bfin_capture_data = {
1578         .card_name = "BF537",
1579         .inputs = vs6624_inputs,
1580         .num_inputs = ARRAY_SIZE(vs6624_inputs),
1581         .routes = vs6624_routes,
1582         .i2c_adapter_id = 0,
1583         .board_info = {
1584                 .type = "vs6624",
1585                 .addr = 0x10,
1586                 .platform_data = (void *)&vs6624_ce_pin,
1587         },
1588         .ppi_info = &ppi_info,
1589         .ppi_control = (PACK_EN | DLEN_8 | XFR_TYPE | 0x0020),
1590 };
1591 #endif
1592
1593 static struct platform_device bfin_capture_device = {
1594         .name = "bfin_capture",
1595         .dev = {
1596                 .platform_data = &bfin_capture_data,
1597         },
1598 };
1599 #endif
1600
1601 #if IS_ENABLED(CONFIG_SERIAL_BFIN)
1602 #ifdef CONFIG_SERIAL_BFIN_UART0
1603 static struct resource bfin_uart0_resources[] = {
1604         {
1605                 .start = UART0_THR,
1606                 .end = UART0_GCTL+2,
1607                 .flags = IORESOURCE_MEM,
1608         },
1609         {
1610                 .start = IRQ_UART0_TX,
1611                 .end = IRQ_UART0_TX,
1612                 .flags = IORESOURCE_IRQ,
1613         },
1614         {
1615                 .start = IRQ_UART0_RX,
1616                 .end = IRQ_UART0_RX,
1617                 .flags = IORESOURCE_IRQ,
1618         },
1619         {
1620                 .start = IRQ_UART0_ERROR,
1621                 .end = IRQ_UART0_ERROR,
1622                 .flags = IORESOURCE_IRQ,
1623         },
1624         {
1625                 .start = CH_UART0_TX,
1626                 .end = CH_UART0_TX,
1627                 .flags = IORESOURCE_DMA,
1628         },
1629         {
1630                 .start = CH_UART0_RX,
1631                 .end = CH_UART0_RX,
1632                 .flags = IORESOURCE_DMA,
1633         },
1634 #ifdef CONFIG_BFIN_UART0_CTSRTS
1635         {       /* CTS pin */
1636                 .start = GPIO_PG7,
1637                 .end = GPIO_PG7,
1638                 .flags = IORESOURCE_IO,
1639         },
1640         {       /* RTS pin */
1641                 .start = GPIO_PG6,
1642                 .end = GPIO_PG6,
1643                 .flags = IORESOURCE_IO,
1644         },
1645 #endif
1646 };
1647
1648 static unsigned short bfin_uart0_peripherals[] = {
1649         P_UART0_TX, P_UART0_RX, 0
1650 };
1651
1652 static struct platform_device bfin_uart0_device = {
1653         .name = "bfin-uart",
1654         .id = 0,
1655         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
1656         .resource = bfin_uart0_resources,
1657         .dev = {
1658                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
1659         },
1660 };
1661 #endif
1662 #ifdef CONFIG_SERIAL_BFIN_UART1
1663 static struct resource bfin_uart1_resources[] = {
1664         {
1665                 .start = UART1_THR,
1666                 .end = UART1_GCTL+2,
1667                 .flags = IORESOURCE_MEM,
1668         },
1669         {
1670                 .start = IRQ_UART1_TX,
1671                 .end = IRQ_UART1_TX,
1672                 .flags = IORESOURCE_IRQ,
1673         },
1674         {
1675                 .start = IRQ_UART1_RX,
1676                 .end = IRQ_UART1_RX,
1677                 .flags = IORESOURCE_IRQ,
1678         },
1679         {
1680                 .start = IRQ_UART1_ERROR,
1681                 .end = IRQ_UART1_ERROR,
1682                 .flags = IORESOURCE_IRQ,
1683         },
1684         {
1685                 .start = CH_UART1_TX,
1686                 .end = CH_UART1_TX,
1687                 .flags = IORESOURCE_DMA,
1688         },
1689         {
1690                 .start = CH_UART1_RX,
1691                 .end = CH_UART1_RX,
1692                 .flags = IORESOURCE_DMA,
1693         },
1694 };
1695
1696 static unsigned short bfin_uart1_peripherals[] = {
1697         P_UART1_TX, P_UART1_RX, 0
1698 };
1699
1700 static struct platform_device bfin_uart1_device = {
1701         .name = "bfin-uart",
1702         .id = 1,
1703         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
1704         .resource = bfin_uart1_resources,
1705         .dev = {
1706                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
1707         },
1708 };
1709 #endif
1710 #endif
1711
1712 #if IS_ENABLED(CONFIG_BFIN_SIR)
1713 #ifdef CONFIG_BFIN_SIR0
1714 static struct resource bfin_sir0_resources[] = {
1715         {
1716                 .start = 0xFFC00400,
1717                 .end = 0xFFC004FF,
1718                 .flags = IORESOURCE_MEM,
1719         },
1720         {
1721                 .start = IRQ_UART0_RX,
1722                 .end = IRQ_UART0_RX+1,
1723                 .flags = IORESOURCE_IRQ,
1724         },
1725         {
1726                 .start = CH_UART0_RX,
1727                 .end = CH_UART0_RX+1,
1728                 .flags = IORESOURCE_DMA,
1729         },
1730 };
1731
1732 static struct platform_device bfin_sir0_device = {
1733         .name = "bfin_sir",
1734         .id = 0,
1735         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
1736         .resource = bfin_sir0_resources,
1737 };
1738 #endif
1739 #ifdef CONFIG_BFIN_SIR1
1740 static struct resource bfin_sir1_resources[] = {
1741         {
1742                 .start = 0xFFC02000,
1743                 .end = 0xFFC020FF,
1744                 .flags = IORESOURCE_MEM,
1745         },
1746         {
1747                 .start = IRQ_UART1_RX,
1748                 .end = IRQ_UART1_RX+1,
1749                 .flags = IORESOURCE_IRQ,
1750         },
1751         {
1752                 .start = CH_UART1_RX,
1753                 .end = CH_UART1_RX+1,
1754                 .flags = IORESOURCE_DMA,
1755         },
1756 };
1757
1758 static struct platform_device bfin_sir1_device = {
1759         .name = "bfin_sir",
1760         .id = 1,
1761         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
1762         .resource = bfin_sir1_resources,
1763 };
1764 #endif
1765 #endif
1766
1767 #if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
1768 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
1769
1770 static struct resource bfin_twi0_resource[] = {
1771         [0] = {
1772                 .start = TWI0_REGBASE,
1773                 .end   = TWI0_REGBASE,
1774                 .flags = IORESOURCE_MEM,
1775         },
1776         [1] = {
1777                 .start = IRQ_TWI,
1778                 .end   = IRQ_TWI,
1779                 .flags = IORESOURCE_IRQ,
1780         },
1781 };
1782
1783 static struct platform_device i2c_bfin_twi_device = {
1784         .name = "i2c-bfin-twi",
1785         .id = 0,
1786         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1787         .resource = bfin_twi0_resource,
1788         .dev = {
1789                 .platform_data = &bfin_twi0_pins,
1790         },
1791 };
1792 #endif
1793
1794 #if IS_ENABLED(CONFIG_KEYBOARD_ADP5588)
1795 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
1796         [0]      = KEY_GRAVE,
1797         [1]      = KEY_1,
1798         [2]      = KEY_2,
1799         [3]      = KEY_3,
1800         [4]      = KEY_4,
1801         [5]      = KEY_5,
1802         [6]      = KEY_6,
1803         [7]      = KEY_7,
1804         [8]      = KEY_8,
1805         [9]      = KEY_9,
1806         [10]     = KEY_0,
1807         [11]     = KEY_MINUS,
1808         [12]     = KEY_EQUAL,
1809         [13]     = KEY_BACKSLASH,
1810         [15]     = KEY_KP0,
1811         [16]     = KEY_Q,
1812         [17]     = KEY_W,
1813         [18]     = KEY_E,
1814         [19]     = KEY_R,
1815         [20]     = KEY_T,
1816         [21]     = KEY_Y,
1817         [22]     = KEY_U,
1818         [23]     = KEY_I,
1819         [24]     = KEY_O,
1820         [25]     = KEY_P,
1821         [26]     = KEY_LEFTBRACE,
1822         [27]     = KEY_RIGHTBRACE,
1823         [29]     = KEY_KP1,
1824         [30]     = KEY_KP2,
1825         [31]     = KEY_KP3,
1826         [32]     = KEY_A,
1827         [33]     = KEY_S,
1828         [34]     = KEY_D,
1829         [35]     = KEY_F,
1830         [36]     = KEY_G,
1831         [37]     = KEY_H,
1832         [38]     = KEY_J,
1833         [39]     = KEY_K,
1834         [40]     = KEY_L,
1835         [41]     = KEY_SEMICOLON,
1836         [42]     = KEY_APOSTROPHE,
1837         [43]     = KEY_BACKSLASH,
1838         [45]     = KEY_KP4,
1839         [46]     = KEY_KP5,
1840         [47]     = KEY_KP6,
1841         [48]     = KEY_102ND,
1842         [49]     = KEY_Z,
1843         [50]     = KEY_X,
1844         [51]     = KEY_C,
1845         [52]     = KEY_V,
1846         [53]     = KEY_B,
1847         [54]     = KEY_N,
1848         [55]     = KEY_M,
1849         [56]     = KEY_COMMA,
1850         [57]     = KEY_DOT,
1851         [58]     = KEY_SLASH,
1852         [60]     = KEY_KPDOT,
1853         [61]     = KEY_KP7,
1854         [62]     = KEY_KP8,
1855         [63]     = KEY_KP9,
1856         [64]     = KEY_SPACE,
1857         [65]     = KEY_BACKSPACE,
1858         [66]     = KEY_TAB,
1859         [67]     = KEY_KPENTER,
1860         [68]     = KEY_ENTER,
1861         [69]     = KEY_ESC,
1862         [70]     = KEY_DELETE,
1863         [74]     = KEY_KPMINUS,
1864         [76]     = KEY_UP,
1865         [77]     = KEY_DOWN,
1866         [78]     = KEY_RIGHT,
1867         [79]     = KEY_LEFT,
1868 };
1869
1870 static struct adp5588_kpad_platform_data adp5588_kpad_data = {
1871         .rows           = 8,
1872         .cols           = 10,
1873         .keymap         = adp5588_keymap,
1874         .keymapsize     = ARRAY_SIZE(adp5588_keymap),
1875         .repeat         = 0,
1876 };
1877 #endif
1878
1879 #if IS_ENABLED(CONFIG_PMIC_ADP5520)
1880 #include <linux/mfd/adp5520.h>
1881
1882         /*
1883          *  ADP5520/5501 Backlight Data
1884          */
1885
1886 static struct adp5520_backlight_platform_data adp5520_backlight_data = {
1887         .fade_in                = ADP5520_FADE_T_1200ms,
1888         .fade_out               = ADP5520_FADE_T_1200ms,
1889         .fade_led_law           = ADP5520_BL_LAW_LINEAR,
1890         .en_ambl_sens           = 1,
1891         .abml_filt              = ADP5520_BL_AMBL_FILT_640ms,
1892         .l1_daylight_max        = ADP5520_BL_CUR_mA(15),
1893         .l1_daylight_dim        = ADP5520_BL_CUR_mA(0),
1894         .l2_office_max          = ADP5520_BL_CUR_mA(7),
1895         .l2_office_dim          = ADP5520_BL_CUR_mA(0),
1896         .l3_dark_max            = ADP5520_BL_CUR_mA(3),
1897         .l3_dark_dim            = ADP5520_BL_CUR_mA(0),
1898         .l2_trip                = ADP5520_L2_COMP_CURR_uA(700),
1899         .l2_hyst                = ADP5520_L2_COMP_CURR_uA(50),
1900         .l3_trip                = ADP5520_L3_COMP_CURR_uA(80),
1901         .l3_hyst                = ADP5520_L3_COMP_CURR_uA(20),
1902 };
1903
1904         /*
1905          *  ADP5520/5501 LEDs Data
1906          */
1907
1908 static struct led_info adp5520_leds[] = {
1909         {
1910                 .name = "adp5520-led1",
1911                 .default_trigger = "none",
1912                 .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
1913         },
1914 #ifdef ADP5520_EN_ALL_LEDS
1915         {
1916                 .name = "adp5520-led2",
1917                 .default_trigger = "none",
1918                 .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
1919         },
1920         {
1921                 .name = "adp5520-led3",
1922                 .default_trigger = "none",
1923                 .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
1924         },
1925 #endif
1926 };
1927
1928 static struct adp5520_leds_platform_data adp5520_leds_data = {
1929         .num_leds = ARRAY_SIZE(adp5520_leds),
1930         .leds = adp5520_leds,
1931         .fade_in = ADP5520_FADE_T_600ms,
1932         .fade_out = ADP5520_FADE_T_600ms,
1933         .led_on_time = ADP5520_LED_ONT_600ms,
1934 };
1935
1936         /*
1937          *  ADP5520 GPIO Data
1938          */
1939
1940 static struct adp5520_gpio_platform_data adp5520_gpio_data = {
1941         .gpio_start = 50,
1942         .gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
1943         .gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
1944 };
1945
1946         /*
1947          *  ADP5520 Keypad Data
1948          */
1949
1950 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
1951         [ADP5520_KEY(0, 0)]     = KEY_GRAVE,
1952         [ADP5520_KEY(0, 1)]     = KEY_1,
1953         [ADP5520_KEY(0, 2)]     = KEY_2,
1954         [ADP5520_KEY(0, 3)]     = KEY_3,
1955         [ADP5520_KEY(1, 0)]     = KEY_4,
1956         [ADP5520_KEY(1, 1)]     = KEY_5,
1957         [ADP5520_KEY(1, 2)]     = KEY_6,
1958         [ADP5520_KEY(1, 3)]     = KEY_7,
1959         [ADP5520_KEY(2, 0)]     = KEY_8,
1960         [ADP5520_KEY(2, 1)]     = KEY_9,
1961         [ADP5520_KEY(2, 2)]     = KEY_0,
1962         [ADP5520_KEY(2, 3)]     = KEY_MINUS,
1963         [ADP5520_KEY(3, 0)]     = KEY_EQUAL,
1964         [ADP5520_KEY(3, 1)]     = KEY_BACKSLASH,
1965         [ADP5520_KEY(3, 2)]     = KEY_BACKSPACE,
1966         [ADP5520_KEY(3, 3)]     = KEY_ENTER,
1967 };
1968
1969 static struct adp5520_keys_platform_data adp5520_keys_data = {
1970         .rows_en_mask   = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
1971         .cols_en_mask   = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
1972         .keymap         = adp5520_keymap,
1973         .keymapsize     = ARRAY_SIZE(adp5520_keymap),
1974         .repeat         = 0,
1975 };
1976
1977         /*
1978          *  ADP5520/5501 Multifunction Device Init Data
1979          */
1980
1981 static struct adp5520_platform_data adp5520_pdev_data = {
1982         .backlight = &adp5520_backlight_data,
1983         .leds = &adp5520_leds_data,
1984         .gpio = &adp5520_gpio_data,
1985         .keys = &adp5520_keys_data,
1986 };
1987
1988 #endif
1989
1990 #if IS_ENABLED(CONFIG_GPIO_ADP5588)
1991 static struct adp5588_gpio_platform_data adp5588_gpio_data = {
1992         .gpio_start = 50,
1993         .pullup_dis_mask = 0,
1994 };
1995 #endif
1996
1997 #if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870)
1998 #include <linux/platform_data/adp8870.h>
1999 static struct led_info adp8870_leds[] = {
2000         {
2001                 .name = "adp8870-led7",
2002                 .default_trigger = "none",
2003                 .flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms,
2004         },
2005 };
2006
2007
2008 static struct adp8870_backlight_platform_data adp8870_pdata = {
2009         .bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 |
2010                          ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6, /* 1 = Backlight 0 = Individual LED */
2011         .pwm_assign = 0,                                /* 1 = Enables PWM mode */
2012
2013         .bl_fade_in = ADP8870_FADE_T_1200ms,            /* Backlight Fade-In Timer */
2014         .bl_fade_out = ADP8870_FADE_T_1200ms,           /* Backlight Fade-Out Timer */
2015         .bl_fade_law = ADP8870_FADE_LAW_CUBIC1,         /* fade-on/fade-off transfer characteristic */
2016
2017         .en_ambl_sens = 1,                              /* 1 = enable ambient light sensor */
2018         .abml_filt = ADP8870_BL_AMBL_FILT_320ms,        /* Light sensor filter time */
2019
2020         .l1_daylight_max = ADP8870_BL_CUR_mA(20),       /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2021         .l1_daylight_dim = ADP8870_BL_CUR_mA(0),        /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2022         .l2_bright_max = ADP8870_BL_CUR_mA(14),         /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2023         .l2_bright_dim = ADP8870_BL_CUR_mA(0),          /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2024         .l3_office_max = ADP8870_BL_CUR_mA(6),          /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2025         .l3_office_dim = ADP8870_BL_CUR_mA(0),          /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2026         .l4_indoor_max = ADP8870_BL_CUR_mA(3),          /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2027         .l4_indor_dim = ADP8870_BL_CUR_mA(0),           /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2028         .l5_dark_max = ADP8870_BL_CUR_mA(2),            /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2029         .l5_dark_dim = ADP8870_BL_CUR_mA(0),            /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2030
2031         .l2_trip = ADP8870_L2_COMP_CURR_uA(710),        /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2032         .l2_hyst = ADP8870_L2_COMP_CURR_uA(73),         /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2033         .l3_trip = ADP8870_L3_COMP_CURR_uA(389),        /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
2034         .l3_hyst = ADP8870_L3_COMP_CURR_uA(54),         /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
2035         .l4_trip = ADP8870_L4_COMP_CURR_uA(167),        /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
2036         .l4_hyst = ADP8870_L4_COMP_CURR_uA(16),         /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
2037         .l5_trip = ADP8870_L5_COMP_CURR_uA(43),         /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2038         .l5_hyst = ADP8870_L5_COMP_CURR_uA(11),         /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2039
2040         .leds = adp8870_leds,
2041         .num_leds = ARRAY_SIZE(adp8870_leds),
2042         .led_fade_law = ADP8870_FADE_LAW_SQUARE,        /* fade-on/fade-off transfer characteristic */
2043         .led_fade_in = ADP8870_FADE_T_600ms,
2044         .led_fade_out = ADP8870_FADE_T_600ms,
2045         .led_on_time = ADP8870_LED_ONT_200ms,
2046 };
2047 #endif
2048
2049 #if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860)
2050 #include <linux/platform_data/adp8860.h>
2051 static struct led_info adp8860_leds[] = {
2052         {
2053                 .name = "adp8860-led7",
2054                 .default_trigger = "none",
2055                 .flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms,
2056         },
2057 };
2058
2059 static struct adp8860_backlight_platform_data adp8860_pdata = {
2060         .bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 |
2061                          ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6, /* 1 = Backlight 0 = Individual LED */
2062
2063         .bl_fade_in = ADP8860_FADE_T_1200ms,            /* Backlight Fade-In Timer */
2064         .bl_fade_out = ADP8860_FADE_T_1200ms,           /* Backlight Fade-Out Timer */
2065         .bl_fade_law = ADP8860_FADE_LAW_CUBIC1,         /* fade-on/fade-off transfer characteristic */
2066
2067         .en_ambl_sens = 1,                              /* 1 = enable ambient light sensor */
2068         .abml_filt = ADP8860_BL_AMBL_FILT_320ms,        /* Light sensor filter time */
2069
2070         .l1_daylight_max = ADP8860_BL_CUR_mA(20),       /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2071         .l1_daylight_dim = ADP8860_BL_CUR_mA(0),        /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2072         .l2_office_max = ADP8860_BL_CUR_mA(6),          /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2073         .l2_office_dim = ADP8860_BL_CUR_mA(0),          /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2074         .l3_dark_max = ADP8860_BL_CUR_mA(2),            /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2075         .l3_dark_dim = ADP8860_BL_CUR_mA(0),            /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2076
2077         .l2_trip = ADP8860_L2_COMP_CURR_uA(710),        /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2078         .l2_hyst = ADP8860_L2_COMP_CURR_uA(73),         /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2079         .l3_trip = ADP8860_L3_COMP_CURR_uA(43),         /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2080         .l3_hyst = ADP8860_L3_COMP_CURR_uA(11),         /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2081
2082         .leds = adp8860_leds,
2083         .num_leds = ARRAY_SIZE(adp8860_leds),
2084         .led_fade_law = ADP8860_FADE_LAW_SQUARE,        /* fade-on/fade-off transfer characteristic */
2085         .led_fade_in = ADP8860_FADE_T_600ms,
2086         .led_fade_out = ADP8860_FADE_T_600ms,
2087         .led_on_time = ADP8860_LED_ONT_200ms,
2088 };
2089 #endif
2090
2091 #if IS_ENABLED(CONFIG_REGULATOR_AD5398)
2092 static struct regulator_consumer_supply ad5398_consumer = {
2093         .supply = "current",
2094 };
2095
2096 static struct regulator_init_data ad5398_regulator_data = {
2097         .constraints = {
2098                 .name = "current range",
2099                 .max_uA = 120000,
2100                 .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
2101         },
2102         .num_consumer_supplies = 1,
2103         .consumer_supplies     = &ad5398_consumer,
2104 };
2105
2106 #if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER)
2107 static struct platform_device ad5398_virt_consumer_device = {
2108         .name = "reg-virt-consumer",
2109         .id = 0,
2110         .dev = {
2111                 .platform_data = "current", /* Passed to driver */
2112         },
2113 };
2114 #endif
2115 #if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
2116 static struct regulator_bulk_data ad5398_bulk_data = {
2117         .supply = "current",
2118 };
2119
2120 static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = {
2121         .name = "ad5398",
2122         .num_supplies = 1,
2123         .supplies = &ad5398_bulk_data,
2124 };
2125
2126 static struct platform_device ad5398_userspace_consumer_device = {
2127         .name = "reg-userspace-consumer",
2128         .id = 0,
2129         .dev = {
2130                 .platform_data = &ad5398_userspace_comsumer_data,
2131         },
2132 };
2133 #endif
2134 #endif
2135
2136 #if IS_ENABLED(CONFIG_ADT7410)
2137 /* INT bound temperature alarm event. line 1 */
2138 static unsigned long adt7410_platform_data[2] = {
2139         IRQ_PG4, IRQF_TRIGGER_LOW,
2140 };
2141 #endif
2142
2143 #if IS_ENABLED(CONFIG_ADT7316_I2C)
2144 /* INT bound temperature alarm event. line 1 */
2145 static unsigned long adt7316_i2c_data[2] = {
2146         IRQF_TRIGGER_LOW, /* interrupt flags */
2147         GPIO_PF4, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
2148 };
2149 #endif
2150
2151 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
2152 #ifdef CONFIG_SND_SOC_AD193X_I2C
2153         {
2154                 I2C_BOARD_INFO("ad1937", 0x04),
2155         },
2156 #endif
2157
2158 #if IS_ENABLED(CONFIG_SND_SOC_ADAV80X)
2159         {
2160                 I2C_BOARD_INFO("adav803", 0x10),
2161         },
2162 #endif
2163
2164 #if IS_ENABLED(CONFIG_INPUT_AD714X_I2C)
2165         {
2166                 I2C_BOARD_INFO("ad7142_captouch", 0x2C),
2167                 .irq = IRQ_PG5,
2168                 .platform_data = (void *)&ad7142_i2c_platform_data,
2169         },
2170 #endif
2171
2172 #if IS_ENABLED(CONFIG_AD7150)
2173         {
2174                 I2C_BOARD_INFO("ad7150", 0x48),
2175                 .irq = IRQ_PG5, /* fixme: use real interrupt number */
2176         },
2177 #endif
2178
2179 #if IS_ENABLED(CONFIG_AD7152)
2180         {
2181                 I2C_BOARD_INFO("ad7152", 0x48),
2182         },
2183 #endif
2184
2185 #if IS_ENABLED(CONFIG_AD774X)
2186         {
2187                 I2C_BOARD_INFO("ad774x", 0x48),
2188         },
2189 #endif
2190
2191 #if IS_ENABLED(CONFIG_ADE7854_I2C)
2192         {
2193                 I2C_BOARD_INFO("ade7854", 0x38),
2194         },
2195 #endif
2196
2197 #if IS_ENABLED(CONFIG_SENSORS_LM75)
2198         {
2199                 I2C_BOARD_INFO("adt75", 0x9),
2200                 .irq = IRQ_PG5,
2201         },
2202 #endif
2203
2204 #if IS_ENABLED(CONFIG_ADT7410)
2205         {
2206                 I2C_BOARD_INFO("adt7410", 0x48),
2207                 /* CT critical temperature event. line 0 */
2208                 .irq = IRQ_PG5,
2209                 .platform_data = (void *)&adt7410_platform_data,
2210         },
2211 #endif
2212
2213 #if IS_ENABLED(CONFIG_AD7291)
2214         {
2215                 I2C_BOARD_INFO("ad7291", 0x20),
2216                 .irq = IRQ_PG5,
2217         },
2218 #endif
2219
2220 #if IS_ENABLED(CONFIG_ADT7316_I2C)
2221         {
2222                 I2C_BOARD_INFO("adt7316", 0x48),
2223                 .irq = IRQ_PG6,
2224                 .platform_data = (void *)&adt7316_i2c_data,
2225         },
2226 #endif
2227
2228 #if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
2229         {
2230                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
2231         },
2232 #endif
2233 #if IS_ENABLED(CONFIG_INPUT_PCF8574)
2234         {
2235                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
2236                 .irq = IRQ_PG6,
2237         },
2238 #endif
2239 #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
2240         {
2241                 I2C_BOARD_INFO("ad7879", 0x2F),
2242                 .irq = IRQ_PG5,
2243                 .platform_data = (void *)&bfin_ad7879_ts_info,
2244         },
2245 #endif
2246 #if IS_ENABLED(CONFIG_KEYBOARD_ADP5588)
2247         {
2248                 I2C_BOARD_INFO("adp5588-keys", 0x34),
2249                 .irq = IRQ_PG0,
2250                 .platform_data = (void *)&adp5588_kpad_data,
2251         },
2252 #endif
2253 #if IS_ENABLED(CONFIG_PMIC_ADP5520)
2254         {
2255                 I2C_BOARD_INFO("pmic-adp5520", 0x32),
2256                 .irq = IRQ_PG0,
2257                 .platform_data = (void *)&adp5520_pdev_data,
2258         },
2259 #endif
2260 #if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
2261         {
2262                 I2C_BOARD_INFO("adxl34x", 0x53),
2263                 .irq = IRQ_PG3,
2264                 .platform_data = (void *)&adxl34x_info,
2265         },
2266 #endif
2267 #if IS_ENABLED(CONFIG_GPIO_ADP5588)
2268         {
2269                 I2C_BOARD_INFO("adp5588-gpio", 0x34),
2270                 .platform_data = (void *)&adp5588_gpio_data,
2271         },
2272 #endif
2273 #if IS_ENABLED(CONFIG_FB_BFIN_7393)
2274         {
2275                 I2C_BOARD_INFO("bfin-adv7393", 0x2B),
2276         },
2277 #endif
2278 #if IS_ENABLED(CONFIG_FB_BF537_LQ035)
2279         {
2280                 I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F),
2281         },
2282 #endif
2283 #if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870)
2284         {
2285                 I2C_BOARD_INFO("adp8870", 0x2B),
2286                 .platform_data = (void *)&adp8870_pdata,
2287         },
2288 #endif
2289 #if IS_ENABLED(CONFIG_SND_SOC_ADAU1371)
2290         {
2291                 I2C_BOARD_INFO("adau1371", 0x1A),
2292         },
2293 #endif
2294 #if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
2295         {
2296                 I2C_BOARD_INFO("adau1761", 0x38),
2297         },
2298 #endif
2299 #if IS_ENABLED(CONFIG_SND_SOC_ADAU1361)
2300         {
2301                 I2C_BOARD_INFO("adau1361", 0x38),
2302         },
2303 #endif
2304 #if IS_ENABLED(CONFIG_SND_SOC_ADAU1701)
2305         {
2306                 I2C_BOARD_INFO("adau1701", 0x34),
2307         },
2308 #endif
2309 #if IS_ENABLED(CONFIG_AD525X_DPOT)
2310         {
2311                 I2C_BOARD_INFO("ad5258", 0x18),
2312         },
2313 #endif
2314 #if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
2315         {
2316                 I2C_BOARD_INFO("ssm2602", 0x1b),
2317         },
2318 #endif
2319 #if IS_ENABLED(CONFIG_REGULATOR_AD5398)
2320         {
2321                 I2C_BOARD_INFO("ad5398", 0xC),
2322                 .platform_data = (void *)&ad5398_regulator_data,
2323         },
2324 #endif
2325 #if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860)
2326         {
2327                 I2C_BOARD_INFO("adp8860", 0x2A),
2328                 .platform_data = (void *)&adp8860_pdata,
2329         },
2330 #endif
2331 #if IS_ENABLED(CONFIG_SND_SOC_ADAU1373)
2332         {
2333                 I2C_BOARD_INFO("adau1373", 0x1A),
2334         },
2335 #endif
2336 #if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
2337         {
2338                 I2C_BOARD_INFO("ad5252", 0x2e),
2339         },
2340 #endif
2341 };
2342 #if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \
2343 || IS_ENABLED(CONFIG_BFIN_SPORT)
2344 unsigned short bfin_sport0_peripherals[] = {
2345         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
2346         P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
2347 };
2348 #endif
2349 #if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
2350 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2351 static struct resource bfin_sport0_uart_resources[] = {
2352         {
2353                 .start = SPORT0_TCR1,
2354                 .end = SPORT0_MRCS3+4,
2355                 .flags = IORESOURCE_MEM,
2356         },
2357         {
2358                 .start = IRQ_SPORT0_RX,
2359                 .end = IRQ_SPORT0_RX+1,
2360                 .flags = IORESOURCE_IRQ,
2361         },
2362         {
2363                 .start = IRQ_SPORT0_ERROR,
2364                 .end = IRQ_SPORT0_ERROR,
2365                 .flags = IORESOURCE_IRQ,
2366         },
2367 };
2368
2369 static struct platform_device bfin_sport0_uart_device = {
2370         .name = "bfin-sport-uart",
2371         .id = 0,
2372         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
2373         .resource = bfin_sport0_uart_resources,
2374         .dev = {
2375                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
2376         },
2377 };
2378 #endif
2379 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2380 static struct resource bfin_sport1_uart_resources[] = {
2381         {
2382                 .start = SPORT1_TCR1,
2383                 .end = SPORT1_MRCS3+4,
2384                 .flags = IORESOURCE_MEM,
2385         },
2386         {
2387                 .start = IRQ_SPORT1_RX,
2388                 .end = IRQ_SPORT1_RX+1,
2389                 .flags = IORESOURCE_IRQ,
2390         },
2391         {
2392                 .start = IRQ_SPORT1_ERROR,
2393                 .end = IRQ_SPORT1_ERROR,
2394                 .flags = IORESOURCE_IRQ,
2395         },
2396 };
2397
2398 static unsigned short bfin_sport1_peripherals[] = {
2399         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
2400         P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
2401 };
2402
2403 static struct platform_device bfin_sport1_uart_device = {
2404         .name = "bfin-sport-uart",
2405         .id = 1,
2406         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
2407         .resource = bfin_sport1_uart_resources,
2408         .dev = {
2409                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
2410         },
2411 };
2412 #endif
2413 #endif
2414 #if IS_ENABLED(CONFIG_BFIN_SPORT)
2415 static struct resource bfin_sport0_resources[] = {
2416         {
2417                 .start = SPORT0_TCR1,
2418                 .end = SPORT0_MRCS3+4,
2419                 .flags = IORESOURCE_MEM,
2420         },
2421         {
2422                 .start = IRQ_SPORT0_RX,
2423                 .end = IRQ_SPORT0_RX+1,
2424                 .flags = IORESOURCE_IRQ,
2425         },
2426         {
2427                 .start = IRQ_SPORT0_TX,
2428                 .end = IRQ_SPORT0_TX+1,
2429                 .flags = IORESOURCE_IRQ,
2430         },
2431         {
2432                 .start = IRQ_SPORT0_ERROR,
2433                 .end = IRQ_SPORT0_ERROR,
2434                 .flags = IORESOURCE_IRQ,
2435         },
2436         {
2437                 .start = CH_SPORT0_TX,
2438                 .end = CH_SPORT0_TX,
2439                 .flags = IORESOURCE_DMA,
2440         },
2441         {
2442                 .start = CH_SPORT0_RX,
2443                 .end = CH_SPORT0_RX,
2444                 .flags = IORESOURCE_DMA,
2445         },
2446 };
2447 static struct platform_device bfin_sport0_device = {
2448         .name = "bfin_sport_raw",
2449         .id = 0,
2450         .num_resources = ARRAY_SIZE(bfin_sport0_resources),
2451         .resource = bfin_sport0_resources,
2452         .dev = {
2453                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
2454         },
2455 };
2456 #endif
2457 #if IS_ENABLED(CONFIG_PATA_PLATFORM)
2458 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
2459 /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
2460
2461 #ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
2462 #define PATA_INT        IRQ_PF5
2463 static struct pata_platform_info bfin_pata_platform_data = {
2464         .ioport_shift = 1,
2465 };
2466
2467 static struct resource bfin_pata_resources[] = {
2468         {
2469                 .start = 0x20314020,
2470                 .end = 0x2031403F,
2471                 .flags = IORESOURCE_MEM,
2472         },
2473         {
2474                 .start = 0x2031401C,
2475                 .end = 0x2031401F,
2476                 .flags = IORESOURCE_MEM,
2477         },
2478         {
2479                 .start = PATA_INT,
2480                 .end = PATA_INT,
2481                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
2482         },
2483 };
2484 #elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
2485 static struct pata_platform_info bfin_pata_platform_data = {
2486         .ioport_shift = 0,
2487 };
2488 /* CompactFlash Storage Card Memory Mapped Addressing
2489  * /REG = A11 = 1
2490  */
2491 static struct resource bfin_pata_resources[] = {
2492         {
2493                 .start = 0x20211800,
2494                 .end = 0x20211807,
2495                 .flags = IORESOURCE_MEM,
2496         },
2497         {
2498                 .start = 0x2021180E,    /* Device Ctl */
2499                 .end = 0x2021180E,
2500                 .flags = IORESOURCE_MEM,
2501         },
2502 };
2503 #endif
2504
2505 static struct platform_device bfin_pata_device = {
2506         .name = "pata_platform",
2507         .id = -1,
2508         .num_resources = ARRAY_SIZE(bfin_pata_resources),
2509         .resource = bfin_pata_resources,
2510         .dev = {
2511                 .platform_data = &bfin_pata_platform_data,
2512         }
2513 };
2514 #endif
2515
2516 static const unsigned int cclk_vlev_datasheet[] =
2517 {
2518         VRPAIR(VLEV_085, 250000000),
2519         VRPAIR(VLEV_090, 376000000),
2520         VRPAIR(VLEV_095, 426000000),
2521         VRPAIR(VLEV_100, 426000000),
2522         VRPAIR(VLEV_105, 476000000),
2523         VRPAIR(VLEV_110, 476000000),
2524         VRPAIR(VLEV_115, 476000000),
2525         VRPAIR(VLEV_120, 500000000),
2526         VRPAIR(VLEV_125, 533000000),
2527         VRPAIR(VLEV_130, 600000000),
2528 };
2529
2530 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
2531         .tuple_tab = cclk_vlev_datasheet,
2532         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
2533         .vr_settling_time = 25 /* us */,
2534 };
2535
2536 static struct platform_device bfin_dpmc = {
2537         .name = "bfin dpmc",
2538         .dev = {
2539                 .platform_data = &bfin_dmpc_vreg_data,
2540         },
2541 };
2542
2543 #if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
2544         IS_ENABLED(CONFIG_SND_BF5XX_AC97)
2545
2546 #define SPORT_REQ(x) \
2547         [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
2548                 P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
2549
2550 static const u16 bfin_snd_pin[][7] = {
2551         SPORT_REQ(0),
2552         SPORT_REQ(1),
2553 };
2554
2555 static struct bfin_snd_platform_data bfin_snd_data[] = {
2556         {
2557                 .pin_req = &bfin_snd_pin[0][0],
2558         },
2559         {
2560                 .pin_req = &bfin_snd_pin[1][0],
2561         },
2562 };
2563
2564 #define BFIN_SND_RES(x) \
2565         [x] = { \
2566                 { \
2567                         .start = SPORT##x##_TCR1, \
2568                         .end = SPORT##x##_TCR1, \
2569                         .flags = IORESOURCE_MEM \
2570                 }, \
2571                 { \
2572                         .start = CH_SPORT##x##_RX, \
2573                         .end = CH_SPORT##x##_RX, \
2574                         .flags = IORESOURCE_DMA, \
2575                 }, \
2576                 { \
2577                         .start = CH_SPORT##x##_TX, \
2578                         .end = CH_SPORT##x##_TX, \
2579                         .flags = IORESOURCE_DMA, \
2580                 }, \
2581                 { \
2582                         .start = IRQ_SPORT##x##_ERROR, \
2583                         .end = IRQ_SPORT##x##_ERROR, \
2584                         .flags = IORESOURCE_IRQ, \
2585                 } \
2586         }
2587
2588 static struct resource bfin_snd_resources[][4] = {
2589         BFIN_SND_RES(0),
2590         BFIN_SND_RES(1),
2591 };
2592 #endif
2593
2594 #if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
2595 static struct platform_device bfin_i2s_pcm = {
2596         .name = "bfin-i2s-pcm-audio",
2597         .id = -1,
2598 };
2599 #endif
2600
2601 #if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
2602 static struct platform_device bfin_ac97_pcm = {
2603         .name = "bfin-ac97-pcm-audio",
2604         .id = -1,
2605 };
2606 #endif
2607
2608 #if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
2609 static const char * const ad1836_link[] = {
2610         "bfin-i2s.0",
2611         "spi0.4",
2612 };
2613 static struct platform_device bfin_ad1836_machine = {
2614         .name = "bfin-snd-ad1836",
2615         .id = -1,
2616         .dev = {
2617                 .platform_data = (void *)ad1836_link,
2618         },
2619 };
2620 #endif
2621
2622 #if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
2623 static const unsigned ad73311_gpio[] = {
2624         GPIO_PF4,
2625 };
2626
2627 static struct platform_device bfin_ad73311_machine = {
2628         .name = "bfin-snd-ad73311",
2629         .id = 1,
2630         .dev = {
2631                 .platform_data = (void *)ad73311_gpio,
2632         },
2633 };
2634 #endif
2635
2636 #if IS_ENABLED(CONFIG_SND_SOC_AD73311)
2637 static struct platform_device bfin_ad73311_codec_device = {
2638         .name = "ad73311",
2639         .id = -1,
2640 };
2641 #endif
2642
2643 #if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X)
2644 static struct platform_device bfin_eval_adav801_device = {
2645         .name = "bfin-eval-adav801",
2646         .id = -1,
2647 };
2648 #endif
2649
2650 #if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
2651 static struct platform_device bfin_i2s = {
2652         .name = "bfin-i2s",
2653         .id = CONFIG_SND_BF5XX_SPORT_NUM,
2654         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2655         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2656         .dev = {
2657                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2658         },
2659 };
2660 #endif
2661
2662 #if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
2663 static struct platform_device bfin_ac97 = {
2664         .name = "bfin-ac97",
2665         .id = CONFIG_SND_BF5XX_SPORT_NUM,
2666         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2667         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2668         .dev = {
2669                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2670         },
2671 };
2672 #endif
2673
2674 #if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE)
2675 #define REGULATOR_ADP122        "adp122"
2676 #define REGULATOR_ADP122_UV     2500000
2677
2678 static struct regulator_consumer_supply adp122_consumers = {
2679                 .supply = REGULATOR_ADP122,
2680 };
2681
2682 static struct regulator_init_data adp_switch_regulator_data = {
2683         .constraints = {
2684                 .name = REGULATOR_ADP122,
2685                 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2686                 .min_uV = REGULATOR_ADP122_UV,
2687                 .max_uV = REGULATOR_ADP122_UV,
2688                 .min_uA = 0,
2689                 .max_uA = 300000,
2690         },
2691         .num_consumer_supplies = 1,     /* only 1 */
2692         .consumer_supplies     = &adp122_consumers,
2693 };
2694
2695 static struct fixed_voltage_config adp_switch_pdata = {
2696         .supply_name = REGULATOR_ADP122,
2697         .microvolts = REGULATOR_ADP122_UV,
2698         .gpio = GPIO_PF2,
2699         .enable_high = 1,
2700         .enabled_at_boot = 0,
2701         .init_data = &adp_switch_regulator_data,
2702 };
2703
2704 static struct platform_device adp_switch_device = {
2705         .name = "reg-fixed-voltage",
2706         .id = 0,
2707         .dev = {
2708                 .platform_data = &adp_switch_pdata,
2709         },
2710 };
2711
2712 #if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
2713 static struct regulator_bulk_data adp122_bulk_data = {
2714         .supply = REGULATOR_ADP122,
2715 };
2716
2717 static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = {
2718         .name = REGULATOR_ADP122,
2719         .num_supplies = 1,
2720         .supplies = &adp122_bulk_data,
2721 };
2722
2723 static struct platform_device adp122_userspace_consumer_device = {
2724         .name = "reg-userspace-consumer",
2725         .id = 0,
2726         .dev = {
2727                 .platform_data = &adp122_userspace_comsumer_data,
2728         },
2729 };
2730 #endif
2731 #endif
2732
2733 #if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER)
2734
2735 static struct resource iio_gpio_trigger_resources[] = {
2736         [0] = {
2737                 .start  = IRQ_PF5,
2738                 .end    = IRQ_PF5,
2739                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
2740         },
2741 };
2742
2743 static struct platform_device iio_gpio_trigger = {
2744         .name = "iio_gpio_trigger",
2745         .num_resources = ARRAY_SIZE(iio_gpio_trigger_resources),
2746         .resource = iio_gpio_trigger_resources,
2747 };
2748 #endif
2749
2750 #if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373)
2751 static struct platform_device bf5xx_adau1373_device = {
2752         .name = "bfin-eval-adau1373",
2753 };
2754 #endif
2755
2756 #if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701)
2757 static struct platform_device bf5xx_adau1701_device = {
2758         .name = "bfin-eval-adau1701",
2759 };
2760 #endif
2761
2762 static struct platform_device *stamp_devices[] __initdata = {
2763
2764         &bfin_dpmc,
2765 #if IS_ENABLED(CONFIG_BFIN_SPORT)
2766         &bfin_sport0_device,
2767 #endif
2768 #if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
2769         &bfin_pcmcia_cf_device,
2770 #endif
2771
2772 #if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
2773         &rtc_device,
2774 #endif
2775
2776 #if IS_ENABLED(CONFIG_USB_SL811_HCD)
2777         &sl811_hcd_device,
2778 #endif
2779
2780 #if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
2781         &isp1362_hcd_device,
2782 #endif
2783
2784 #if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
2785         &bfin_isp1760_device,
2786 #endif
2787
2788 #if IS_ENABLED(CONFIG_SMC91X)
2789         &smc91x_device,
2790 #endif
2791
2792 #if IS_ENABLED(CONFIG_DM9000)
2793         &dm9000_device,
2794 #endif
2795
2796 #if IS_ENABLED(CONFIG_CAN_BFIN)
2797         &bfin_can_device,
2798 #endif
2799
2800 #if IS_ENABLED(CONFIG_BFIN_MAC)
2801         &bfin_mii_bus,
2802         &bfin_mac_device,
2803 #endif
2804
2805 #if IS_ENABLED(CONFIG_USB_NET2272)
2806         &net2272_bfin_device,
2807 #endif
2808
2809 #if IS_ENABLED(CONFIG_SPI_BFIN5XX)
2810         &bfin_spi0_device,
2811 #endif
2812
2813 #if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
2814         &bfin_sport_spi0_device,
2815         &bfin_sport_spi1_device,
2816 #endif
2817
2818 #if IS_ENABLED(CONFIG_FB_BF537_LQ035)
2819         &bfin_fb_device,
2820 #endif
2821
2822 #if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
2823         &bfin_lq035q1_device,
2824 #endif
2825
2826 #if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
2827         &bfin_capture_device,
2828 #endif
2829
2830 #if IS_ENABLED(CONFIG_SERIAL_BFIN)
2831 #ifdef CONFIG_SERIAL_BFIN_UART0
2832         &bfin_uart0_device,
2833 #endif
2834 #ifdef CONFIG_SERIAL_BFIN_UART1
2835         &bfin_uart1_device,
2836 #endif
2837 #endif
2838
2839 #if IS_ENABLED(CONFIG_BFIN_SIR)
2840 #ifdef CONFIG_BFIN_SIR0
2841         &bfin_sir0_device,
2842 #endif
2843 #ifdef CONFIG_BFIN_SIR1
2844         &bfin_sir1_device,
2845 #endif
2846 #endif
2847
2848 #if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
2849         &i2c_bfin_twi_device,
2850 #endif
2851
2852 #if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
2853 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2854         &bfin_sport0_uart_device,
2855 #endif
2856 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2857         &bfin_sport1_uart_device,
2858 #endif
2859 #endif
2860
2861 #if IS_ENABLED(CONFIG_PATA_PLATFORM)
2862         &bfin_pata_device,
2863 #endif
2864
2865 #if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
2866         &bfin_device_gpiokeys,
2867 #endif
2868
2869 #if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
2870         &bfin_async_nand_device,
2871 #endif
2872
2873 #if IS_ENABLED(CONFIG_MTD_PHYSMAP)
2874         &stamp_flash_device,
2875 #endif
2876
2877 #if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
2878         &bfin_i2s_pcm,
2879 #endif
2880
2881 #if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
2882         &bfin_ac97_pcm,
2883 #endif
2884
2885 #if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
2886         &bfin_ad1836_machine,
2887 #endif
2888
2889 #if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
2890         &bfin_ad73311_machine,
2891 #endif
2892
2893 #if IS_ENABLED(CONFIG_SND_SOC_AD73311)
2894         &bfin_ad73311_codec_device,
2895 #endif
2896
2897 #if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
2898         &bfin_i2s,
2899 #endif
2900
2901 #if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
2902         &bfin_ac97,
2903 #endif
2904
2905 #if IS_ENABLED(CONFIG_REGULATOR_AD5398)
2906 #if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER)
2907         &ad5398_virt_consumer_device,
2908 #endif
2909 #if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
2910         &ad5398_userspace_consumer_device,
2911 #endif
2912 #endif
2913
2914 #if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE)
2915         &adp_switch_device,
2916 #if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
2917         &adp122_userspace_consumer_device,
2918 #endif
2919 #endif
2920
2921 #if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER)
2922         &iio_gpio_trigger,
2923 #endif
2924
2925 #if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373)
2926         &bf5xx_adau1373_device,
2927 #endif
2928
2929 #if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701)
2930         &bf5xx_adau1701_device,
2931 #endif
2932
2933 #if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X)
2934         &bfin_eval_adav801_device,
2935 #endif
2936 };
2937
2938 static int __init net2272_init(void)
2939 {
2940 #if IS_ENABLED(CONFIG_USB_NET2272)
2941         int ret;
2942
2943         ret = gpio_request(GPIO_PF6, "net2272");
2944         if (ret)
2945                 return ret;
2946
2947         /* Reset the USB chip */
2948         gpio_direction_output(GPIO_PF6, 0);
2949         mdelay(2);
2950         gpio_set_value(GPIO_PF6, 1);
2951 #endif
2952
2953         return 0;
2954 }
2955
2956 static int __init stamp_init(void)
2957 {
2958         printk(KERN_INFO "%s(): registering device resources\n", __func__);
2959         bfin_plat_nand_init();
2960         adf702x_mac_init();
2961         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
2962         i2c_register_board_info(0, bfin_i2c_board_info,
2963                                 ARRAY_SIZE(bfin_i2c_board_info));
2964         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
2965
2966         if (net2272_init())
2967                 pr_warning("unable to configure net2272; it probably won't work\n");
2968
2969         return 0;
2970 }
2971
2972 arch_initcall(stamp_init);
2973
2974
2975 static struct platform_device *stamp_early_devices[] __initdata = {
2976 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
2977 #ifdef CONFIG_SERIAL_BFIN_UART0
2978         &bfin_uart0_device,
2979 #endif
2980 #ifdef CONFIG_SERIAL_BFIN_UART1
2981         &bfin_uart1_device,
2982 #endif
2983 #endif
2984
2985 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
2986 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2987         &bfin_sport0_uart_device,
2988 #endif
2989 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2990         &bfin_sport1_uart_device,
2991 #endif
2992 #endif
2993 };
2994
2995 void __init native_machine_early_platform_add_devices(void)
2996 {
2997         printk(KERN_INFO "register early platform devices\n");
2998         early_platform_add_devices(stamp_early_devices,
2999                 ARRAY_SIZE(stamp_early_devices));
3000 }
3001
3002 void native_machine_restart(char *cmd)
3003 {
3004         /* workaround reboot hang when booting from SPI */
3005         if ((bfin_read_SYSCR() & 0x7) == 0x3)
3006                 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
3007 }
3008
3009 /*
3010  * Currently the MAC address is saved in Flash by U-Boot
3011  */
3012 #define FLASH_MAC       0x203f0000
3013 int bfin_get_ether_addr(char *addr)
3014 {
3015         *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
3016         *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
3017         return 0;
3018 }
3019 EXPORT_SYMBOL(bfin_get_ether_addr);