arch/blackfin/include/asm/entry.h

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *
   4  * Licensed under the GPL-2 or later.
   5  */
   6
   7 #ifndef __BFIN_ENTRY_H
   8 #define __BFIN_ENTRY_H
   9
  10 #include <asm/setup.h>
  11 #include <asm/page.h>
  12
  13 #ifdef __ASSEMBLY__
  14
  15 #define LFLUSH_I_AND_D  0x00000808
  16 #define LSIGTRAP        5
  17
  18 /* process bits for task_struct.flags */
  19 #define PF_TRACESYS_OFF 3
  20 #define PF_TRACESYS_BIT 5
  21 #define PF_PTRACED_OFF  3
  22 #define PF_PTRACED_BIT  4
  23 #define PF_DTRACE_OFF   1
  24 #define PF_DTRACE_BIT   5
  25
  26 /*
  27  * NOTE!  The single-stepping code assumes that all interrupt handlers
  28  * start by saving SYSCFG on the stack with their first instruction.
  29  */
  30
  31 /* This one is used for exceptions, emulation, and NMI.  It doesn't push
  32    RETI and doesn't do cli.  */
  33 #define SAVE_ALL_SYS            save_context_no_interrupts
  34 /* This is used for all normal interrupts.  It saves a minimum of registers
  35    to the stack, loads the IRQ number, and jumps to common code.  */
  36 #ifdef CONFIG_IPIPE
  37 # define LOAD_IPIPE_IPEND \
  38         P0.l = lo(IPEND); \
  39         P0.h = hi(IPEND); \
  40         R1 = [P0];
  41 #else
  42 # define LOAD_IPIPE_IPEND
  43 #endif
  44
  45 /*
  46  * Workaround for anomalies 05000283 and 05000315
  47  */
  48 #if ANOMALY_05000283 || ANOMALY_05000315
  49 # define ANOMALY_283_315_WORKAROUND(preg, dreg)         \
  50         cc = dreg == dreg;                              \
  51         preg.h = HI(CHIPID);                            \
  52         preg.l = LO(CHIPID);                            \
  53         if cc jump 1f;                                  \
  54         dreg.l = W[preg];                               \
  55 1:
  56 #else
  57 # define ANOMALY_283_315_WORKAROUND(preg, dreg)
  58 #endif /* ANOMALY_05000283 || ANOMALY_05000315 */
  59
  60 #ifndef CONFIG_EXACT_HWERR
  61 /* As a debugging aid - we save IPEND when DEBUG_KERNEL is on,
  62  * otherwise it is a waste of cycles.
  63  */
  64 # ifndef CONFIG_DEBUG_KERNEL
  65 #define INTERRUPT_ENTRY(N)                                              \
  66     [--sp] = SYSCFG;                                                    \
  67     [--sp] = P0;        /*orig_p0*/                                     \
  68     [--sp] = R0;        /*orig_r0*/                                     \
  69     [--sp] = (R7:0,P5:0);                                               \
  70     R0 = (N);                                                           \
  71     LOAD_IPIPE_IPEND                                                    \
  72     jump __common_int_entry;
  73 # else /* CONFIG_DEBUG_KERNEL */
  74 #define INTERRUPT_ENTRY(N)                                              \
  75     [--sp] = SYSCFG;                                                    \
  76     [--sp] = P0;        /*orig_p0*/                                     \
  77     [--sp] = R0;        /*orig_r0*/                                     \
  78     [--sp] = (R7:0,P5:0);                                               \
  79     p0.l = lo(IPEND);                                                   \
  80     p0.h = hi(IPEND);                                                   \
  81     r1 = [p0];                                                          \
  82     R0 = (N);                                                           \
  83     LOAD_IPIPE_IPEND                                                    \
  84     jump __common_int_entry;
  85 # endif /* CONFIG_DEBUG_KERNEL */
  86
  87 /* For timer interrupts, we need to save IPEND, since the user_mode
  88  *macro accesses it to determine where to account time.
  89  */
  90 #define TIMER_INTERRUPT_ENTRY(N)                                        \
  91     [--sp] = SYSCFG;                                                    \
  92     [--sp] = P0;        /*orig_p0*/                                     \
  93     [--sp] = R0;        /*orig_r0*/                                     \
  94     [--sp] = (R7:0,P5:0);                                               \
  95     p0.l = lo(IPEND);                                                   \
  96     p0.h = hi(IPEND);                                                   \
  97     r1 = [p0];                                                          \
  98     R0 = (N);                                                           \
  99     jump __common_int_entry;
 100 #else /* CONFIG_EXACT_HWERR is defined */
 101
 102 /* if we want hardware error to be exact, we need to do a SSYNC (which forces
 103  * read/writes to complete to the memory controllers), and check to see that
 104  * caused a pending HW error condition. If so, we assume it was caused by user
 105  * space, by setting the same interrupt that we are in (so it goes off again)
 106  * and context restore, and a RTI (without servicing anything). This should
 107  * cause the pending HWERR to fire, and when that is done, this interrupt will
 108  * be re-serviced properly.
 109  * As you can see by the code - we actually need to do two SSYNCS - one to
 110  * make sure the read/writes complete, and another to make sure the hardware
 111  * error is recognized by the core.
 112  *
 113  * The extra nop before the SSYNC is to make sure we work around 05000244,
 114  * since the 283/315 workaround includes a branch to the end
 115  */
 116 #define INTERRUPT_ENTRY(N)                                              \
 117     [--sp] = SYSCFG;                                                    \
 118     [--sp] = P0;        /*orig_p0*/                                     \
 119     [--sp] = R0;        /*orig_r0*/                                     \
 120     [--sp] = (R7:0,P5:0);                                               \
 121     R1 = ASTAT;                                                         \
 122     ANOMALY_283_315_WORKAROUND(p0, r0)                                  \
 123     P0.L = LO(ILAT);                                                    \
 124     P0.H = HI(ILAT);                                                    \
 125     NOP;                                                                \
 126     SSYNC;                                                              \
 127     SSYNC;                                                              \
 128     R0 = [P0];                                                          \
 129     CC = BITTST(R0, EVT_IVHW_P);                                        \
 130     IF CC JUMP 1f;                                                      \
 131     ASTAT = R1;                                                         \
 132     p0.l = lo(IPEND);                                                   \
 133     p0.h = hi(IPEND);                                                   \
 134     r1 = [p0];                                                          \
 135     R0 = (N);                                                           \
 136     LOAD_IPIPE_IPEND                                                    \
 137     jump __common_int_entry;                                            \
 138 1:  ASTAT = R1;                                                         \
 139     RAISE N;                                                            \
 140     (R7:0, P5:0) = [SP++];                                              \
 141     SP += 0x8;                                                          \
 142     SYSCFG = [SP++];                                                    \
 143     CSYNC;                                                              \
 144     RTI;
 145
 146 #define TIMER_INTERRUPT_ENTRY(N)                                        \
 147     [--sp] = SYSCFG;                                                    \
 148     [--sp] = P0;        /*orig_p0*/                                     \
 149     [--sp] = R0;        /*orig_r0*/                                     \
 150     [--sp] = (R7:0,P5:0);                                               \
 151     R1 = ASTAT;                                                         \
 152     ANOMALY_283_315_WORKAROUND(p0, r0)                                  \
 153     P0.L = LO(ILAT);                                                    \
 154     P0.H = HI(ILAT);                                                    \
 155     NOP;                                                                \
 156     SSYNC;                                                              \
 157     SSYNC;                                                              \
 158     R0 = [P0];                                                          \
 159     CC = BITTST(R0, EVT_IVHW_P);                                        \
 160     IF CC JUMP 1f;                                                      \
 161     ASTAT = R1;                                                         \
 162     p0.l = lo(IPEND);                                                   \
 163     p0.h = hi(IPEND);                                                   \
 164     r1 = [p0];                                                          \
 165     R0 = (N);                                                           \
 166     jump __common_int_entry;                                            \
 167 1:  ASTAT = R1;                                                         \
 168     RAISE N;                                                            \
 169     (R7:0, P5:0) = [SP++];                                              \
 170     SP += 0x8;                                                          \
 171     SYSCFG = [SP++];                                                    \
 172     CSYNC;                                                              \
 173     RTI;
 174 #endif  /* CONFIG_EXACT_HWERR */
 175
 176 /* This one pushes RETI without using CLI.  Interrupts are enabled.  */
 177 #define SAVE_CONTEXT_SYSCALL    save_context_syscall
 178 #define SAVE_CONTEXT            save_context_with_interrupts
 179 #define SAVE_CONTEXT_CPLB       save_context_cplb
 180
 181 #define RESTORE_ALL_SYS         restore_context_no_interrupts
 182 #define RESTORE_CONTEXT         restore_context_with_interrupts
 183 #define RESTORE_CONTEXT_CPLB    restore_context_cplb
 184
 185 #endif                          /* __ASSEMBLY__ */
 186 #endif                          /* __BFIN_ENTRY_H */