arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
   4  * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
   5  */
   6
   7 /dts-v1/;
   8 #include <dt-bindings/input/linux-event-codes.h>
   9 #include <dt-bindings/pwm/pwm.h>
  10 #include "rk3399.dtsi"
  11 #include "rk3399-opp.dtsi"
  12
  13 / {
  14         model = "Pine64 RockPro64";
  15         compatible = "pine64,rockpro64", "rockchip,rk3399";
  16
  17         chosen {
  18                 stdout-path = "serial2:1500000n8";
  19         };
  20
  21         clkin_gmac: external-gmac-clock {
  22                 compatible = "fixed-clock";
  23                 clock-frequency = <125000000>;
  24                 clock-output-names = "clkin_gmac";
  25                 #clock-cells = <0>;
  26         };
  27
  28         gpio-keys {
  29                 compatible = "gpio-keys";
  30                 autorepeat;
  31                 pinctrl-names = "default";
  32                 pinctrl-0 = <&pwrbtn>;
  33
  34                 power {
  35                         debounce-interval = <100>;
  36                         gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
  37                         label = "GPIO Key Power";
  38                         linux,code = <KEY_POWER>;
  39                         wakeup-source;
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45                 pinctrl-names = "default";
  46                 pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
  47
  48                 work-led {
  49                         label = "work";
  50                         default-state = "on";
  51                         gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
  52                 };
  53
  54                 diy-led {
  55                         label = "diy";
  56                         default-state = "off";
  57                         gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
  58                 };
  59         };
  60
  61         fan: pwm-fan {
  62                 compatible = "pwm-fan";
  63                 #cooling-cells = <2>;
  64                 fan-supply = <&vcc12v_dcin>;
  65                 pwms = <&pwm1 0 50000 0>;
  66         };
  67
  68         sdio_pwrseq: sdio-pwrseq {
  69                 compatible = "mmc-pwrseq-simple";
  70                 clocks = <&rk808 1>;
  71                 clock-names = "ext_clock";
  72                 pinctrl-names = "default";
  73                 pinctrl-0 = <&wifi_enable_h>;
  74
  75                 /*
  76                  * On the module itself this is one of these (depending
  77                  * on the actual card populated):
  78                  * - SDIO_RESET_L_WL_REG_ON
  79                  * - PDN (power down when low)
  80                  */
  81                 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
  82         };
  83
  84         vcc12v_dcin: vcc12v-dcin {
  85                 compatible = "regulator-fixed";
  86                 regulator-name = "vcc12v_dcin";
  87                 regulator-always-on;
  88                 regulator-boot-on;
  89                 regulator-min-microvolt = <12000000>;
  90                 regulator-max-microvolt = <12000000>;
  91         };
  92
  93         /* switched by pmic_sleep */
  94         vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
  95                 compatible = "regulator-fixed";
  96                 regulator-name = "vcc1v8_s3";
  97                 regulator-always-on;
  98                 regulator-boot-on;
  99                 regulator-min-microvolt = <1800000>;
 100                 regulator-max-microvolt = <1800000>;
 101                 vin-supply = <&vcc_1v8>;
 102         };
 103
 104         vcc3v3_pcie: vcc3v3-pcie-regulator {
 105                 compatible = "regulator-fixed";
 106                 enable-active-high;
 107                 gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
 108                 pinctrl-names = "default";
 109                 pinctrl-0 = <&pcie_pwr_en>;
 110                 regulator-name = "vcc3v3_pcie";
 111                 regulator-always-on;
 112                 regulator-boot-on;
 113                 vin-supply = <&vcc12v_dcin>;
 114         };
 115
 116         vcc3v3_sys: vcc3v3-sys {
 117                 compatible = "regulator-fixed";
 118                 regulator-name = "vcc3v3_sys";
 119                 regulator-always-on;
 120                 regulator-boot-on;
 121                 regulator-min-microvolt = <3300000>;
 122                 regulator-max-microvolt = <3300000>;
 123                 vin-supply = <&vcc5v0_sys>;
 124         };
 125
 126         /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
 127         vcc5v0_host: vcc5v0-host-regulator {
 128                 compatible = "regulator-fixed";
 129                 enable-active-high;
 130                 gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
 131                 pinctrl-names = "default";
 132                 pinctrl-0 = <&vcc5v0_host_en>;
 133                 regulator-name = "vcc5v0_host";
 134                 regulator-always-on;
 135                 vin-supply = <&vcc5v0_usb>;
 136         };
 137
 138         vcc5v0_typec: vcc5v0-typec-regulator {
 139                 compatible = "regulator-fixed";
 140                 enable-active-high;
 141                 gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
 142                 pinctrl-names = "default";
 143                 pinctrl-0 = <&vcc5v0_typec_en>;
 144                 regulator-name = "vcc5v0_typec";
 145                 regulator-always-on;
 146                 vin-supply = <&vcc5v0_usb>;
 147         };
 148
 149         vcc5v0_sys: vcc5v0-sys {
 150                 compatible = "regulator-fixed";
 151                 regulator-name = "vcc5v0_sys";
 152                 regulator-always-on;
 153                 regulator-boot-on;
 154                 regulator-min-microvolt = <5000000>;
 155                 regulator-max-microvolt = <5000000>;
 156                 vin-supply = <&vcc12v_dcin>;
 157         };
 158
 159         vcc5v0_usb: vcc5v0-usb {
 160                 compatible = "regulator-fixed";
 161                 regulator-name = "vcc5v0_usb";
 162                 regulator-always-on;
 163                 regulator-boot-on;
 164                 regulator-min-microvolt = <5000000>;
 165                 regulator-max-microvolt = <5000000>;
 166                 vin-supply = <&vcc12v_dcin>;
 167         };
 168
 169         vdd_log: vdd-log {
 170                 compatible = "pwm-regulator";
 171                 pwms = <&pwm2 0 25000 1>;
 172                 regulator-name = "vdd_log";
 173                 regulator-always-on;
 174                 regulator-boot-on;
 175                 regulator-min-microvolt = <800000>;
 176                 regulator-max-microvolt = <1400000>;
 177                 vin-supply = <&vcc5v0_sys>;
 178         };
 179 };
 180
 181 &cpu_l0 {
 182         cpu-supply = <&vdd_cpu_l>;
 183 };
 184
 185 &cpu_l1 {
 186         cpu-supply = <&vdd_cpu_l>;
 187 };
 188
 189 &cpu_l2 {
 190         cpu-supply = <&vdd_cpu_l>;
 191 };
 192
 193 &cpu_l3 {
 194         cpu-supply = <&vdd_cpu_l>;
 195 };
 196
 197 &cpu_b0 {
 198         cpu-supply = <&vdd_cpu_b>;
 199 };
 200
 201 &cpu_b1 {
 202         cpu-supply = <&vdd_cpu_b>;
 203 };
 204
 205 &emmc_phy {
 206         status = "okay";
 207 };
 208
 209 &gmac {
 210         assigned-clocks = <&cru SCLK_RMII_SRC>;
 211         assigned-clock-parents = <&clkin_gmac>;
 212         clock_in_out = "input";
 213         phy-supply = <&vcc_lan>;
 214         phy-mode = "rgmii";
 215         pinctrl-names = "default";
 216         pinctrl-0 = <&rgmii_pins>;
 217         snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
 218         snps,reset-active-low;
 219         snps,reset-delays-us = <0 10000 50000>;
 220         tx_delay = <0x28>;
 221         rx_delay = <0x11>;
 222         status = "okay";
 223 };
 224
 225 &hdmi {
 226         ddc-i2c-bus = <&i2c3>;
 227         pinctrl-names = "default";
 228         pinctrl-0 = <&hdmi_cec>;
 229         status = "okay";
 230 };
 231
 232 &hdmi_sound {
 233         status = "okay";
 234 };
 235
 236 &gpu {
 237         mali-supply = <&vdd_gpu>;
 238         status = "okay";
 239 };
 240
 241 &i2c0 {
 242         clock-frequency = <400000>;
 243         i2c-scl-rising-time-ns = <168>;
 244         i2c-scl-falling-time-ns = <4>;
 245         status = "okay";
 246
 247         rk808: pmic@1b {
 248                 compatible = "rockchip,rk808";
 249                 reg = <0x1b>;
 250                 interrupt-parent = <&gpio1>;
 251                 interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
 252                 #clock-cells = <1>;
 253                 clock-output-names = "xin32k", "rk808-clkout2";
 254                 pinctrl-names = "default";
 255                 pinctrl-0 = <&pmic_int_l>;
 256                 rockchip,system-power-controller;
 257                 wakeup-source;
 258
 259                 vcc1-supply = <&vcc5v0_sys>;
 260                 vcc2-supply = <&vcc5v0_sys>;
 261                 vcc3-supply = <&vcc5v0_sys>;
 262                 vcc4-supply = <&vcc5v0_sys>;
 263                 vcc6-supply = <&vcc5v0_sys>;
 264                 vcc7-supply = <&vcc5v0_sys>;
 265                 vcc8-supply = <&vcc3v3_sys>;
 266                 vcc9-supply = <&vcc5v0_sys>;
 267                 vcc10-supply = <&vcc5v0_sys>;
 268                 vcc11-supply = <&vcc5v0_sys>;
 269                 vcc12-supply = <&vcc3v3_sys>;
 270                 vddio-supply = <&vcca_1v8>;
 271
 272                 regulators {
 273                         vdd_center: DCDC_REG1 {
 274                                 regulator-name = "vdd_center";
 275                                 regulator-always-on;
 276                                 regulator-boot-on;
 277                                 regulator-min-microvolt = <750000>;
 278                                 regulator-max-microvolt = <1350000>;
 279                                 regulator-ramp-delay = <6001>;
 280                                 regulator-state-mem {
 281                                         regulator-off-in-suspend;
 282                                 };
 283                         };
 284
 285                         vdd_cpu_l: DCDC_REG2 {
 286                                 regulator-name = "vdd_cpu_l";
 287                                 regulator-always-on;
 288                                 regulator-boot-on;
 289                                 regulator-min-microvolt = <750000>;
 290                                 regulator-max-microvolt = <1350000>;
 291                                 regulator-ramp-delay = <6001>;
 292                                 regulator-state-mem {
 293                                         regulator-off-in-suspend;
 294                                 };
 295                         };
 296
 297                         vcc_ddr: DCDC_REG3 {
 298                                 regulator-name = "vcc_ddr";
 299                                 regulator-always-on;
 300                                 regulator-boot-on;
 301                                 regulator-state-mem {
 302                                         regulator-on-in-suspend;
 303                                 };
 304                         };
 305
 306                         vcc_1v8: DCDC_REG4 {
 307                                 regulator-name = "vcc_1v8";
 308                                 regulator-always-on;
 309                                 regulator-boot-on;
 310                                 regulator-min-microvolt = <1800000>;
 311                                 regulator-max-microvolt = <1800000>;
 312                                 regulator-state-mem {
 313                                         regulator-on-in-suspend;
 314                                         regulator-suspend-microvolt = <1800000>;
 315                                 };
 316                         };
 317
 318                         vcc1v8_dvp: LDO_REG1 {
 319                                 regulator-name = "vcc1v8_dvp";
 320                                 regulator-always-on;
 321                                 regulator-boot-on;
 322                                 regulator-min-microvolt = <1800000>;
 323                                 regulator-max-microvolt = <1800000>;
 324                                 regulator-state-mem {
 325                                         regulator-off-in-suspend;
 326                                 };
 327                         };
 328
 329                         vcc3v0_touch: LDO_REG2 {
 330                                 regulator-name = "vcc3v0_touch";
 331                                 regulator-always-on;
 332                                 regulator-boot-on;
 333                                 regulator-min-microvolt = <3000000>;
 334                                 regulator-max-microvolt = <3000000>;
 335                                 regulator-state-mem {
 336                                         regulator-off-in-suspend;
 337                                 };
 338                         };
 339
 340                         vcca_1v8: LDO_REG3 {
 341                                 regulator-name = "vcca_1v8";
 342                                 regulator-always-on;
 343                                 regulator-boot-on;
 344                                 regulator-min-microvolt = <1800000>;
 345                                 regulator-max-microvolt = <1800000>;
 346                                 regulator-state-mem {
 347                                         regulator-on-in-suspend;
 348                                         regulator-suspend-microvolt = <1800000>;
 349                                 };
 350                         };
 351
 352                         vcc_sdio: LDO_REG4 {
 353                                 regulator-name = "vcc_sdio";
 354                                 regulator-always-on;
 355                                 regulator-boot-on;
 356                                 regulator-min-microvolt = <1800000>;
 357                                 regulator-max-microvolt = <3000000>;
 358                                 regulator-state-mem {
 359                                         regulator-on-in-suspend;
 360                                         regulator-suspend-microvolt = <3000000>;
 361                                 };
 362                         };
 363
 364                         vcca3v0_codec: LDO_REG5 {
 365                                 regulator-name = "vcca3v0_codec";
 366                                 regulator-always-on;
 367                                 regulator-boot-on;
 368                                 regulator-min-microvolt = <3000000>;
 369                                 regulator-max-microvolt = <3000000>;
 370                                 regulator-state-mem {
 371                                         regulator-off-in-suspend;
 372                                 };
 373                         };
 374
 375                         vcc_1v5: LDO_REG6 {
 376                                 regulator-name = "vcc_1v5";
 377                                 regulator-always-on;
 378                                 regulator-boot-on;
 379                                 regulator-min-microvolt = <1500000>;
 380                                 regulator-max-microvolt = <1500000>;
 381                                 regulator-state-mem {
 382                                         regulator-on-in-suspend;
 383                                         regulator-suspend-microvolt = <1500000>;
 384                                 };
 385                         };
 386
 387                         vcca1v8_codec: LDO_REG7 {
 388                                 regulator-name = "vcca1v8_codec";
 389                                 regulator-always-on;
 390                                 regulator-boot-on;
 391                                 regulator-min-microvolt = <1800000>;
 392                                 regulator-max-microvolt = <1800000>;
 393                                 regulator-state-mem {
 394                                         regulator-off-in-suspend;
 395                                 };
 396                         };
 397
 398                         vcc_3v0: LDO_REG8 {
 399                                 regulator-name = "vcc_3v0";
 400                                 regulator-always-on;
 401                                 regulator-boot-on;
 402                                 regulator-min-microvolt = <3000000>;
 403                                 regulator-max-microvolt = <3000000>;
 404                                 regulator-state-mem {
 405                                         regulator-on-in-suspend;
 406                                         regulator-suspend-microvolt = <3000000>;
 407                                 };
 408                         };
 409
 410                         vcc3v3_s3: vcc_lan: SWITCH_REG1 {
 411                                 regulator-name = "vcc3v3_s3";
 412                                 regulator-always-on;
 413                                 regulator-boot-on;
 414                                 regulator-state-mem {
 415                                         regulator-off-in-suspend;
 416                                 };
 417                         };
 418
 419                         vcc3v3_s0: SWITCH_REG2 {
 420                                 regulator-name = "vcc3v3_s0";
 421                                 regulator-always-on;
 422                                 regulator-boot-on;
 423                                 regulator-state-mem {
 424                                         regulator-off-in-suspend;
 425                                 };
 426                         };
 427                 };
 428         };
 429
 430         vdd_cpu_b: regulator@40 {
 431                 compatible = "silergy,syr827";
 432                 reg = <0x40>;
 433                 fcs,suspend-voltage-selector = <1>;
 434                 pinctrl-names = "default";
 435                 pinctrl-0 = <&vsel1_gpio>;
 436                 regulator-name = "vdd_cpu_b";
 437                 regulator-min-microvolt = <712500>;
 438                 regulator-max-microvolt = <1500000>;
 439                 regulator-ramp-delay = <1000>;
 440                 regulator-always-on;
 441                 regulator-boot-on;
 442                 vin-supply = <&vcc5v0_sys>;
 443
 444                 regulator-state-mem {
 445                         regulator-off-in-suspend;
 446                 };
 447         };
 448
 449         vdd_gpu: regulator@41 {
 450                 compatible = "silergy,syr828";
 451                 reg = <0x41>;
 452                 fcs,suspend-voltage-selector = <1>;
 453                 pinctrl-names = "default";
 454                 pinctrl-0 = <&vsel2_gpio>;
 455                 regulator-name = "vdd_gpu";
 456                 regulator-min-microvolt = <712500>;
 457                 regulator-max-microvolt = <1500000>;
 458                 regulator-ramp-delay = <1000>;
 459                 regulator-always-on;
 460                 regulator-boot-on;
 461                 vin-supply = <&vcc5v0_sys>;
 462
 463                 regulator-state-mem {
 464                         regulator-off-in-suspend;
 465                 };
 466         };
 467 };
 468
 469 &i2c1 {
 470         i2c-scl-rising-time-ns = <300>;
 471         i2c-scl-falling-time-ns = <15>;
 472         status = "okay";
 473 };
 474
 475 &i2c3 {
 476         i2c-scl-rising-time-ns = <450>;
 477         i2c-scl-falling-time-ns = <15>;
 478         status = "okay";
 479 };
 480
 481 &i2c4 {
 482         i2c-scl-rising-time-ns = <600>;
 483         i2c-scl-falling-time-ns = <20>;
 484         status = "okay";
 485
 486         fusb0: typec-portc@22 {
 487                 compatible = "fcs,fusb302";
 488                 reg = <0x22>;
 489                 interrupt-parent = <&gpio1>;
 490                 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
 491                 pinctrl-names = "default";
 492                 pinctrl-0 = <&fusb0_int>;
 493                 vbus-supply = <&vcc5v0_typec>;
 494                 status = "okay";
 495         };
 496 };
 497
 498 &i2s0 {
 499         rockchip,playback-channels = <8>;
 500         rockchip,capture-channels = <8>;
 501         status = "okay";
 502 };
 503
 504 &i2s1 {
 505         rockchip,playback-channels = <2>;
 506         rockchip,capture-channels = <2>;
 507         status = "okay";
 508 };
 509
 510 &i2s2 {
 511         status = "okay";
 512 };
 513
 514 &io_domains {
 515         status = "okay";
 516
 517         bt656-supply = <&vcc1v8_dvp>;
 518         audio-supply = <&vcc_3v0>;
 519         sdmmc-supply = <&vcc_sdio>;
 520         gpio1830-supply = <&vcc_3v0>;
 521 };
 522
 523 &pcie0 {
 524         ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 525         num-lanes = <4>;
 526         pinctrl-names = "default";
 527         pinctrl-0 = <&pcie_perst>;
 528         vpcie12v-supply = <&vcc12v_dcin>;
 529         vpcie3v3-supply = <&vcc3v3_pcie>;
 530         status = "okay";
 531 };
 532
 533 &pcie_phy {
 534         status = "okay";
 535 };
 536
 537 &pmu_io_domains {
 538         pmu1830-supply = <&vcc_3v0>;
 539         status = "okay";
 540 };
 541
 542 &pinctrl {
 543         buttons {
 544                 pwrbtn: pwrbtn {
 545                         rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 546                 };
 547         };
 548
 549         fusb302x {
 550                 fusb0_int: fusb0-int {
 551                         rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 552                 };
 553         };
 554
 555         leds {
 556                 work_led_gpio: work_led-gpio {
 557                         rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 558                 };
 559
 560                 diy_led_gpio: diy_led-gpio {
 561                         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 562                 };
 563         };
 564
 565         pcie {
 566                 pcie_perst: pcie-perst {
 567                         rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 568                 };
 569
 570                 pcie_pwr_en: pcie-pwr-en {
 571                         rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 572                 };
 573         };
 574
 575         pmic {
 576                 pmic_int_l: pmic-int-l {
 577                         rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 578                 };
 579
 580                 vsel1_gpio: vsel1-gpio {
 581                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 582                 };
 583
 584                 vsel2_gpio: vsel2-gpio {
 585                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 586                 };
 587         };
 588
 589         sdio-pwrseq {
 590                 wifi_enable_h: wifi-enable-h {
 591                         rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 592                 };
 593         };
 594
 595         usb-typec {
 596                 vcc5v0_typec_en: vcc5v0_typec_en {
 597                         rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 598                 };
 599         };
 600
 601         usb2 {
 602                 vcc5v0_host_en: vcc5v0-host-en {
 603                         rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 604                 };
 605         };
 606 };
 607
 608 &pwm0 {
 609         status = "okay";
 610 };
 611
 612 &pwm1 {
 613         status = "okay";
 614 };
 615
 616 &pwm2 {
 617         status = "okay";
 618 };
 619
 620 &saradc {
 621         vref-supply = <&vcca1v8_s3>;
 622         status = "okay";
 623 };
 624
 625 &sdmmc {
 626         bus-width = <4>;
 627         cap-mmc-highspeed;
 628         cap-sd-highspeed;
 629         cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 630         disable-wp;
 631         max-frequency = <150000000>;
 632         pinctrl-names = "default";
 633         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
 634         status = "okay";
 635 };
 636
 637 &sdhci {
 638         bus-width = <8>;
 639         mmc-hs400-1_8v;
 640         mmc-hs400-enhanced-strobe;
 641         non-removable;
 642         status = "okay";
 643 };
 644
 645 &spi1 {
 646         status = "okay";
 647
 648         flash@0 {
 649                 compatible = "jedec,spi-nor";
 650                 reg = <0>;
 651                 spi-max-frequency = <10000000>;
 652         };
 653 };
 654
 655 &tcphy0 {
 656         status = "okay";
 657 };
 658
 659 &tcphy1 {
 660         status = "okay";
 661 };
 662
 663 &tsadc {
 664         /* tshut mode 0:CRU 1:GPIO */
 665         rockchip,hw-tshut-mode = <1>;
 666         /* tshut polarity 0:LOW 1:HIGH */
 667         rockchip,hw-tshut-polarity = <1>;
 668         status = "okay";
 669 };
 670
 671 &u2phy0 {
 672         status = "okay";
 673
 674         u2phy0_otg: otg-port {
 675                 status = "okay";
 676         };
 677
 678         u2phy0_host: host-port {
 679                 phy-supply = <&vcc5v0_host>;
 680                 status = "okay";
 681         };
 682 };
 683
 684 &u2phy1 {
 685         status = "okay";
 686
 687         u2phy1_otg: otg-port {
 688                 status = "okay";
 689         };
 690
 691         u2phy1_host: host-port {
 692                 phy-supply = <&vcc5v0_host>;
 693                 status = "okay";
 694         };
 695 };
 696
 697 &uart0 {
 698         pinctrl-names = "default";
 699         pinctrl-0 = <&uart0_xfer &uart0_cts>;
 700         status = "okay";
 701 };
 702
 703 &uart2 {
 704         status = "okay";
 705 };
 706
 707 &usb_host0_ehci {
 708         status = "okay";
 709 };
 710
 711 &usb_host0_ohci {
 712         status = "okay";
 713 };
 714
 715 &usb_host1_ehci {
 716         status = "okay";
 717 };
 718
 719 &usb_host1_ohci {
 720         status = "okay";
 721 };
 722
 723 &usbdrd3_0 {
 724         status = "okay";
 725 };
 726
 727 &usbdrd_dwc3_0 {
 728         status = "okay";
 729         dr_mode = "otg";
 730 };
 731
 732 &usbdrd3_1 {
 733         status = "okay";
 734 };
 735
 736 &usbdrd_dwc3_1 {
 737         status = "okay";
 738         dr_mode = "host";
 739 };
 740
 741 &vopb {
 742         status = "okay";
 743 };
 744
 745 &vopb_mmu {
 746         status = "okay";
 747 };
 748
 749 &vopl {
 750         status = "okay";
 751 };
 752
 753 &vopl_mmu {
 754         status = "okay";
 755 };