arch/arm64/boot/dts/qcom/sdm845.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * SDM845 SoC device tree source
   4  *
   5  * Copyright (c) 2018, The Linux Foundation. All rights reserved.
   6  */
   7
   8 #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
   9 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
  10 #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
  11 #include <dt-bindings/clock/qcom,lpass-sdm845.h>
  12 #include <dt-bindings/clock/qcom,rpmh.h>
  13 #include <dt-bindings/clock/qcom,videocc-sdm845.h>
  14 #include <dt-bindings/interconnect/qcom,sdm845.h>
  15 #include <dt-bindings/interrupt-controller/arm-gic.h>
  16 #include <dt-bindings/phy/phy-qcom-qusb2.h>
  17 #include <dt-bindings/power/qcom-rpmpd.h>
  18 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
  19 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
  20 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
  21 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
  22 #include <dt-bindings/thermal/thermal.h>
  23
  24 / {
  25         interrupt-parent = <&intc>;
  26
  27         #address-cells = <2>;
  28         #size-cells = <2>;
  29
  30         aliases {
  31                 i2c0 = &i2c0;
  32                 i2c1 = &i2c1;
  33                 i2c2 = &i2c2;
  34                 i2c3 = &i2c3;
  35                 i2c4 = &i2c4;
  36                 i2c5 = &i2c5;
  37                 i2c6 = &i2c6;
  38                 i2c7 = &i2c7;
  39                 i2c8 = &i2c8;
  40                 i2c9 = &i2c9;
  41                 i2c10 = &i2c10;
  42                 i2c11 = &i2c11;
  43                 i2c12 = &i2c12;
  44                 i2c13 = &i2c13;
  45                 i2c14 = &i2c14;
  46                 i2c15 = &i2c15;
  47                 spi0 = &spi0;
  48                 spi1 = &spi1;
  49                 spi2 = &spi2;
  50                 spi3 = &spi3;
  51                 spi4 = &spi4;
  52                 spi5 = &spi5;
  53                 spi6 = &spi6;
  54                 spi7 = &spi7;
  55                 spi8 = &spi8;
  56                 spi9 = &spi9;
  57                 spi10 = &spi10;
  58                 spi11 = &spi11;
  59                 spi12 = &spi12;
  60                 spi13 = &spi13;
  61                 spi14 = &spi14;
  62                 spi15 = &spi15;
  63         };
  64
  65         chosen { };
  66
  67         memory@80000000 {
  68                 device_type = "memory";
  69                 /* We expect the bootloader to fill in the size */
  70                 reg = <0 0x80000000 0 0>;
  71         };
  72
  73         reserved-memory {
  74                 #address-cells = <2>;
  75                 #size-cells = <2>;
  76                 ranges;
  77
  78                 hyp_mem: memory@85700000 {
  79                         reg = <0 0x85700000 0 0x600000>;
  80                         no-map;
  81                 };
  82
  83                 xbl_mem: memory@85e00000 {
  84                         reg = <0 0x85e00000 0 0x100000>;
  85                         no-map;
  86                 };
  87
  88                 aop_mem: memory@85fc0000 {
  89                         reg = <0 0x85fc0000 0 0x20000>;
  90                         no-map;
  91                 };
  92
  93                 aop_cmd_db_mem: memory@85fe0000 {
  94                         compatible = "qcom,cmd-db";
  95                         reg = <0x0 0x85fe0000 0 0x20000>;
  96                         no-map;
  97                 };
  98
  99                 smem_mem: memory@86000000 {
 100                         reg = <0x0 0x86000000 0 0x200000>;
 101                         no-map;
 102                 };
 103
 104                 tz_mem: memory@86200000 {
 105                         reg = <0 0x86200000 0 0x2d00000>;
 106                         no-map;
 107                 };
 108
 109                 rmtfs_mem: memory@88f00000 {
 110                         compatible = "qcom,rmtfs-mem";
 111                         reg = <0 0x88f00000 0 0x200000>;
 112                         no-map;
 113
 114                         qcom,client-id = <1>;
 115                         qcom,vmid = <15>;
 116                 };
 117
 118                 qseecom_mem: memory@8ab00000 {
 119                         reg = <0 0x8ab00000 0 0x1400000>;
 120                         no-map;
 121                 };
 122
 123                 camera_mem: memory@8bf00000 {
 124                         reg = <0 0x8bf00000 0 0x500000>;
 125                         no-map;
 126                 };
 127
 128                 ipa_fw_mem: memory@8c400000 {
 129                         reg = <0 0x8c400000 0 0x10000>;
 130                         no-map;
 131                 };
 132
 133                 ipa_gsi_mem: memory@8c410000 {
 134                         reg = <0 0x8c410000 0 0x5000>;
 135                         no-map;
 136                 };
 137
 138                 gpu_mem: memory@8c415000 {
 139                         reg = <0 0x8c415000 0 0x2000>;
 140                         no-map;
 141                 };
 142
 143                 adsp_mem: memory@8c500000 {
 144                         reg = <0 0x8c500000 0 0x1a00000>;
 145                         no-map;
 146                 };
 147
 148                 wlan_msa_mem: memory@8df00000 {
 149                         reg = <0 0x8df00000 0 0x100000>;
 150                         no-map;
 151                 };
 152
 153                 mpss_region: memory@8e000000 {
 154                         reg = <0 0x8e000000 0 0x7800000>;
 155                         no-map;
 156                 };
 157
 158                 venus_mem: memory@95800000 {
 159                         reg = <0 0x95800000 0 0x500000>;
 160                         no-map;
 161                 };
 162
 163                 cdsp_mem: memory@95d00000 {
 164                         reg = <0 0x95d00000 0 0x800000>;
 165                         no-map;
 166                 };
 167
 168                 mba_region: memory@96500000 {
 169                         reg = <0 0x96500000 0 0x200000>;
 170                         no-map;
 171                 };
 172
 173                 slpi_mem: memory@96700000 {
 174                         reg = <0 0x96700000 0 0x1400000>;
 175                         no-map;
 176                 };
 177
 178                 spss_mem: memory@97b00000 {
 179                         reg = <0 0x97b00000 0 0x100000>;
 180                         no-map;
 181                 };
 182         };
 183
 184         cpus {
 185                 #address-cells = <2>;
 186                 #size-cells = <0>;
 187
 188                 CPU0: cpu@0 {
 189                         device_type = "cpu";
 190                         compatible = "qcom,kryo385";
 191                         reg = <0x0 0x0>;
 192                         enable-method = "psci";
 193                         cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 194                                            &LITTLE_CPU_SLEEP_1
 195                                            &CLUSTER_SLEEP_0>;
 196                         capacity-dmips-mhz = <607>;
 197                         dynamic-power-coefficient = <100>;
 198                         qcom,freq-domain = <&cpufreq_hw 0>;
 199                         #cooling-cells = <2>;
 200                         next-level-cache = <&L2_0>;
 201                         L2_0: l2-cache {
 202                                 compatible = "cache";
 203                                 next-level-cache = <&L3_0>;
 204                                 L3_0: l3-cache {
 205                                       compatible = "cache";
 206                                 };
 207                         };
 208                 };
 209
 210                 CPU1: cpu@100 {
 211                         device_type = "cpu";
 212                         compatible = "qcom,kryo385";
 213                         reg = <0x0 0x100>;
 214                         enable-method = "psci";
 215                         cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 216                                            &LITTLE_CPU_SLEEP_1
 217                                            &CLUSTER_SLEEP_0>;
 218                         capacity-dmips-mhz = <607>;
 219                         dynamic-power-coefficient = <100>;
 220                         qcom,freq-domain = <&cpufreq_hw 0>;
 221                         #cooling-cells = <2>;
 222                         next-level-cache = <&L2_100>;
 223                         L2_100: l2-cache {
 224                                 compatible = "cache";
 225                                 next-level-cache = <&L3_0>;
 226                         };
 227                 };
 228
 229                 CPU2: cpu@200 {
 230                         device_type = "cpu";
 231                         compatible = "qcom,kryo385";
 232                         reg = <0x0 0x200>;
 233                         enable-method = "psci";
 234                         cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 235                                            &LITTLE_CPU_SLEEP_1
 236                                            &CLUSTER_SLEEP_0>;
 237                         capacity-dmips-mhz = <607>;
 238                         dynamic-power-coefficient = <100>;
 239                         qcom,freq-domain = <&cpufreq_hw 0>;
 240                         #cooling-cells = <2>;
 241                         next-level-cache = <&L2_200>;
 242                         L2_200: l2-cache {
 243                                 compatible = "cache";
 244                                 next-level-cache = <&L3_0>;
 245                         };
 246                 };
 247
 248                 CPU3: cpu@300 {
 249                         device_type = "cpu";
 250                         compatible = "qcom,kryo385";
 251                         reg = <0x0 0x300>;
 252                         enable-method = "psci";
 253                         cpu-idle-states = <&LITTLE_CPU_SLEEP_0
 254                                            &LITTLE_CPU_SLEEP_1
 255                                            &CLUSTER_SLEEP_0>;
 256                         capacity-dmips-mhz = <607>;
 257                         dynamic-power-coefficient = <100>;
 258                         qcom,freq-domain = <&cpufreq_hw 0>;
 259                         #cooling-cells = <2>;
 260                         next-level-cache = <&L2_300>;
 261                         L2_300: l2-cache {
 262                                 compatible = "cache";
 263                                 next-level-cache = <&L3_0>;
 264                         };
 265                 };
 266
 267                 CPU4: cpu@400 {
 268                         device_type = "cpu";
 269                         compatible = "qcom,kryo385";
 270                         reg = <0x0 0x400>;
 271                         enable-method = "psci";
 272                         capacity-dmips-mhz = <1024>;
 273                         cpu-idle-states = <&BIG_CPU_SLEEP_0
 274                                            &BIG_CPU_SLEEP_1
 275                                            &CLUSTER_SLEEP_0>;
 276                         dynamic-power-coefficient = <396>;
 277                         qcom,freq-domain = <&cpufreq_hw 1>;
 278                         #cooling-cells = <2>;
 279                         next-level-cache = <&L2_400>;
 280                         L2_400: l2-cache {
 281                                 compatible = "cache";
 282                                 next-level-cache = <&L3_0>;
 283                         };
 284                 };
 285
 286                 CPU5: cpu@500 {
 287                         device_type = "cpu";
 288                         compatible = "qcom,kryo385";
 289                         reg = <0x0 0x500>;
 290                         enable-method = "psci";
 291                         capacity-dmips-mhz = <1024>;
 292                         cpu-idle-states = <&BIG_CPU_SLEEP_0
 293                                            &BIG_CPU_SLEEP_1
 294                                            &CLUSTER_SLEEP_0>;
 295                         dynamic-power-coefficient = <396>;
 296                         qcom,freq-domain = <&cpufreq_hw 1>;
 297                         #cooling-cells = <2>;
 298                         next-level-cache = <&L2_500>;
 299                         L2_500: l2-cache {
 300                                 compatible = "cache";
 301                                 next-level-cache = <&L3_0>;
 302                         };
 303                 };
 304
 305                 CPU6: cpu@600 {
 306                         device_type = "cpu";
 307                         compatible = "qcom,kryo385";
 308                         reg = <0x0 0x600>;
 309                         enable-method = "psci";
 310                         capacity-dmips-mhz = <1024>;
 311                         cpu-idle-states = <&BIG_CPU_SLEEP_0
 312                                            &BIG_CPU_SLEEP_1
 313                                            &CLUSTER_SLEEP_0>;
 314                         dynamic-power-coefficient = <396>;
 315                         qcom,freq-domain = <&cpufreq_hw 1>;
 316                         #cooling-cells = <2>;
 317                         next-level-cache = <&L2_600>;
 318                         L2_600: l2-cache {
 319                                 compatible = "cache";
 320                                 next-level-cache = <&L3_0>;
 321                         };
 322                 };
 323
 324                 CPU7: cpu@700 {
 325                         device_type = "cpu";
 326                         compatible = "qcom,kryo385";
 327                         reg = <0x0 0x700>;
 328                         enable-method = "psci";
 329                         capacity-dmips-mhz = <1024>;
 330                         cpu-idle-states = <&BIG_CPU_SLEEP_0
 331                                            &BIG_CPU_SLEEP_1
 332                                            &CLUSTER_SLEEP_0>;
 333                         dynamic-power-coefficient = <396>;
 334                         qcom,freq-domain = <&cpufreq_hw 1>;
 335                         #cooling-cells = <2>;
 336                         next-level-cache = <&L2_700>;
 337                         L2_700: l2-cache {
 338                                 compatible = "cache";
 339                                 next-level-cache = <&L3_0>;
 340                         };
 341                 };
 342
 343                 cpu-map {
 344                         cluster0 {
 345                                 core0 {
 346                                         cpu = <&CPU0>;
 347                                 };
 348
 349                                 core1 {
 350                                         cpu = <&CPU1>;
 351                                 };
 352
 353                                 core2 {
 354                                         cpu = <&CPU2>;
 355                                 };
 356
 357                                 core3 {
 358                                         cpu = <&CPU3>;
 359                                 };
 360
 361                                 core4 {
 362                                         cpu = <&CPU4>;
 363                                 };
 364
 365                                 core5 {
 366                                         cpu = <&CPU5>;
 367                                 };
 368
 369                                 core6 {
 370                                         cpu = <&CPU6>;
 371                                 };
 372
 373                                 core7 {
 374                                         cpu = <&CPU7>;
 375                                 };
 376                         };
 377                 };
 378
 379                 idle-states {
 380                         entry-method = "psci";
 381
 382                         LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
 383                                 compatible = "arm,idle-state";
 384                                 idle-state-name = "little-power-down";
 385                                 arm,psci-suspend-param = <0x40000003>;
 386                                 entry-latency-us = <350>;
 387                                 exit-latency-us = <461>;
 388                                 min-residency-us = <1890>;
 389                                 local-timer-stop;
 390                         };
 391
 392                         LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
 393                                 compatible = "arm,idle-state";
 394                                 idle-state-name = "little-rail-power-down";
 395                                 arm,psci-suspend-param = <0x40000004>;
 396                                 entry-latency-us = <360>;
 397                                 exit-latency-us = <531>;
 398                                 min-residency-us = <3934>;
 399                                 local-timer-stop;
 400                         };
 401
 402                         BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
 403                                 compatible = "arm,idle-state";
 404                                 idle-state-name = "big-power-down";
 405                                 arm,psci-suspend-param = <0x40000003>;
 406                                 entry-latency-us = <264>;
 407                                 exit-latency-us = <621>;
 408                                 min-residency-us = <952>;
 409                                 local-timer-stop;
 410                         };
 411
 412                         BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
 413                                 compatible = "arm,idle-state";
 414                                 idle-state-name = "big-rail-power-down";
 415                                 arm,psci-suspend-param = <0x40000004>;
 416                                 entry-latency-us = <702>;
 417                                 exit-latency-us = <1061>;
 418                                 min-residency-us = <4488>;
 419                                 local-timer-stop;
 420                         };
 421
 422                         CLUSTER_SLEEP_0: cluster-sleep-0 {
 423                                 compatible = "arm,idle-state";
 424                                 idle-state-name = "cluster-power-down";
 425                                 arm,psci-suspend-param = <0x400000F4>;
 426                                 entry-latency-us = <3263>;
 427                                 exit-latency-us = <6562>;
 428                                 min-residency-us = <9987>;
 429                                 local-timer-stop;
 430                         };
 431                 };
 432         };
 433
 434         pmu {
 435                 compatible = "arm,armv8-pmuv3";
 436                 interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
 437         };
 438
 439         timer {
 440                 compatible = "arm,armv8-timer";
 441                 interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
 442                              <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
 443                              <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
 444                              <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
 445         };
 446
 447         clocks {
 448                 xo_board: xo-board {
 449                         compatible = "fixed-clock";
 450                         #clock-cells = <0>;
 451                         clock-frequency = <38400000>;
 452                         clock-output-names = "xo_board";
 453                 };
 454
 455                 sleep_clk: sleep-clk {
 456                         compatible = "fixed-clock";
 457                         #clock-cells = <0>;
 458                         clock-frequency = <32764>;
 459                 };
 460         };
 461
 462         firmware {
 463                 scm {
 464                         compatible = "qcom,scm-sdm845", "qcom,scm";
 465                 };
 466         };
 467
 468         adsp_pas: remoteproc-adsp {
 469                 compatible = "qcom,sdm845-adsp-pas";
 470
 471                 interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
 472                                       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 473                                       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
 474                                       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
 475                                       <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
 476                 interrupt-names = "wdog", "fatal", "ready",
 477                                   "handover", "stop-ack";
 478
 479                 clocks = <&rpmhcc RPMH_CXO_CLK>;
 480                 clock-names = "xo";
 481
 482                 memory-region = <&adsp_mem>;
 483
 484                 qcom,smem-states = <&adsp_smp2p_out 0>;
 485                 qcom,smem-state-names = "stop";
 486
 487                 status = "disabled";
 488
 489                 glink-edge {
 490                         interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 491                         label = "lpass";
 492                         qcom,remote-pid = <2>;
 493                         mboxes = <&apss_shared 8>;
 494                         fastrpc {
 495                                 compatible = "qcom,fastrpc";
 496                                 qcom,glink-channels = "fastrpcglink-apps-dsp";
 497                                 label = "adsp";
 498                                 #address-cells = <1>;
 499                                 #size-cells = <0>;
 500
 501                                 compute-cb@3 {
 502                                         compatible = "qcom,fastrpc-compute-cb";
 503                                         reg = <3>;
 504                                         iommus = <&apps_smmu 0x1823 0x0>;
 505                                 };
 506
 507                                 compute-cb@4 {
 508                                         compatible = "qcom,fastrpc-compute-cb";
 509                                         reg = <4>;
 510                                         iommus = <&apps_smmu 0x1824 0x0>;
 511                                 };
 512                         };
 513                 };
 514         };
 515
 516         cdsp_pas: remoteproc-cdsp {
 517                 compatible = "qcom,sdm845-cdsp-pas";
 518
 519                 interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 520                                       <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 521                                       <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
 522                                       <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
 523                                       <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
 524                 interrupt-names = "wdog", "fatal", "ready",
 525                                   "handover", "stop-ack";
 526
 527                 clocks = <&rpmhcc RPMH_CXO_CLK>;
 528                 clock-names = "xo";
 529
 530                 memory-region = <&cdsp_mem>;
 531
 532                 qcom,smem-states = <&cdsp_smp2p_out 0>;
 533                 qcom,smem-state-names = "stop";
 534
 535                 status = "disabled";
 536
 537                 glink-edge {
 538                         interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
 539                         label = "turing";
 540                         qcom,remote-pid = <5>;
 541                         mboxes = <&apss_shared 4>;
 542                         fastrpc {
 543                                 compatible = "qcom,fastrpc";
 544                                 qcom,glink-channels = "fastrpcglink-apps-dsp";
 545                                 label = "cdsp";
 546                                 #address-cells = <1>;
 547                                 #size-cells = <0>;
 548
 549                                 compute-cb@1 {
 550                                         compatible = "qcom,fastrpc-compute-cb";
 551                                         reg = <1>;
 552                                         iommus = <&apps_smmu 0x1401 0x30>;
 553                                 };
 554
 555                                 compute-cb@2 {
 556                                         compatible = "qcom,fastrpc-compute-cb";
 557                                         reg = <2>;
 558                                         iommus = <&apps_smmu 0x1402 0x30>;
 559                                 };
 560
 561                                 compute-cb@3 {
 562                                         compatible = "qcom,fastrpc-compute-cb";
 563                                         reg = <3>;
 564                                         iommus = <&apps_smmu 0x1403 0x30>;
 565                                 };
 566
 567                                 compute-cb@4 {
 568                                         compatible = "qcom,fastrpc-compute-cb";
 569                                         reg = <4>;
 570                                         iommus = <&apps_smmu 0x1404 0x30>;
 571                                 };
 572
 573                                 compute-cb@5 {
 574                                         compatible = "qcom,fastrpc-compute-cb";
 575                                         reg = <5>;
 576                                         iommus = <&apps_smmu 0x1405 0x30>;
 577                                 };
 578
 579                                 compute-cb@6 {
 580                                         compatible = "qcom,fastrpc-compute-cb";
 581                                         reg = <6>;
 582                                         iommus = <&apps_smmu 0x1406 0x30>;
 583                                 };
 584
 585                                 compute-cb@7 {
 586                                         compatible = "qcom,fastrpc-compute-cb";
 587                                         reg = <7>;
 588                                         iommus = <&apps_smmu 0x1407 0x30>;
 589                                 };
 590
 591                                 compute-cb@8 {
 592                                         compatible = "qcom,fastrpc-compute-cb";
 593                                         reg = <8>;
 594                                         iommus = <&apps_smmu 0x1408 0x30>;
 595                                 };
 596                         };
 597                 };
 598         };
 599
 600         tcsr_mutex: hwlock {
 601                 compatible = "qcom,tcsr-mutex";
 602                 syscon = <&tcsr_mutex_regs 0 0x1000>;
 603                 #hwlock-cells = <1>;
 604         };
 605
 606         smem {
 607                 compatible = "qcom,smem";
 608                 memory-region = <&smem_mem>;
 609                 hwlocks = <&tcsr_mutex 3>;
 610         };
 611
 612         smp2p-cdsp {
 613                 compatible = "qcom,smp2p";
 614                 qcom,smem = <94>, <432>;
 615
 616                 interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
 617
 618                 mboxes = <&apss_shared 6>;
 619
 620                 qcom,local-pid = <0>;
 621                 qcom,remote-pid = <5>;
 622
 623                 cdsp_smp2p_out: master-kernel {
 624                         qcom,entry-name = "master-kernel";
 625                         #qcom,smem-state-cells = <1>;
 626                 };
 627
 628                 cdsp_smp2p_in: slave-kernel {
 629                         qcom,entry-name = "slave-kernel";
 630
 631                         interrupt-controller;
 632                         #interrupt-cells = <2>;
 633                 };
 634         };
 635
 636         smp2p-lpass {
 637                 compatible = "qcom,smp2p";
 638                 qcom,smem = <443>, <429>;
 639
 640                 interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
 641
 642                 mboxes = <&apss_shared 10>;
 643
 644                 qcom,local-pid = <0>;
 645                 qcom,remote-pid = <2>;
 646
 647                 adsp_smp2p_out: master-kernel {
 648                         qcom,entry-name = "master-kernel";
 649                         #qcom,smem-state-cells = <1>;
 650                 };
 651
 652                 adsp_smp2p_in: slave-kernel {
 653                         qcom,entry-name = "slave-kernel";
 654
 655                         interrupt-controller;
 656                         #interrupt-cells = <2>;
 657                 };
 658         };
 659
 660         smp2p-mpss {
 661                 compatible = "qcom,smp2p";
 662                 qcom,smem = <435>, <428>;
 663                 interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
 664                 mboxes = <&apss_shared 14>;
 665                 qcom,local-pid = <0>;
 666                 qcom,remote-pid = <1>;
 667
 668                 modem_smp2p_out: master-kernel {
 669                         qcom,entry-name = "master-kernel";
 670                         #qcom,smem-state-cells = <1>;
 671                 };
 672
 673                 modem_smp2p_in: slave-kernel {
 674                         qcom,entry-name = "slave-kernel";
 675                         interrupt-controller;
 676                         #interrupt-cells = <2>;
 677                 };
 678         };
 679
 680         smp2p-slpi {
 681                 compatible = "qcom,smp2p";
 682                 qcom,smem = <481>, <430>;
 683                 interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
 684                 mboxes = <&apss_shared 26>;
 685                 qcom,local-pid = <0>;
 686                 qcom,remote-pid = <3>;
 687
 688                 slpi_smp2p_out: master-kernel {
 689                         qcom,entry-name = "master-kernel";
 690                         #qcom,smem-state-cells = <1>;
 691                 };
 692
 693                 slpi_smp2p_in: slave-kernel {
 694                         qcom,entry-name = "slave-kernel";
 695                         interrupt-controller;
 696                         #interrupt-cells = <2>;
 697                 };
 698         };
 699
 700         psci {
 701                 compatible = "arm,psci-1.0";
 702                 method = "smc";
 703         };
 704
 705         soc: soc@0 {
 706                 #address-cells = <2>;
 707                 #size-cells = <2>;
 708                 ranges = <0 0 0 0 0x10 0>;
 709                 dma-ranges = <0 0 0 0 0x10 0>;
 710                 compatible = "simple-bus";
 711
 712                 gcc: clock-controller@100000 {
 713                         compatible = "qcom,gcc-sdm845";
 714                         reg = <0 0x00100000 0 0x1f0000>;
 715                         #clock-cells = <1>;
 716                         #reset-cells = <1>;
 717                         #power-domain-cells = <1>;
 718                 };
 719
 720                 qfprom@784000 {
 721                         compatible = "qcom,qfprom";
 722                         reg = <0 0x00784000 0 0x8ff>;
 723                         #address-cells = <1>;
 724                         #size-cells = <1>;
 725
 726                         qusb2p_hstx_trim: hstx-trim-primary@1eb {
 727                                 reg = <0x1eb 0x1>;
 728                                 bits = <1 4>;
 729                         };
 730
 731                         qusb2s_hstx_trim: hstx-trim-secondary@1eb {
 732                                 reg = <0x1eb 0x2>;
 733                                 bits = <6 4>;
 734                         };
 735                 };
 736
 737                 rng: rng@793000 {
 738                         compatible = "qcom,prng-ee";
 739                         reg = <0 0x00793000 0 0x1000>;
 740                         clocks = <&gcc GCC_PRNG_AHB_CLK>;
 741                         clock-names = "core";
 742                 };
 743
 744                 qupv3_id_0: geniqup@8c0000 {
 745                         compatible = "qcom,geni-se-qup";
 746                         reg = <0 0x008c0000 0 0x6000>;
 747                         clock-names = "m-ahb", "s-ahb";
 748                         clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
 749                                  <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
 750                         #address-cells = <2>;
 751                         #size-cells = <2>;
 752                         ranges;
 753                         status = "disabled";
 754
 755                         i2c0: i2c@880000 {
 756                                 compatible = "qcom,geni-i2c";
 757                                 reg = <0 0x00880000 0 0x4000>;
 758                                 clock-names = "se";
 759                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 760                                 pinctrl-names = "default";
 761                                 pinctrl-0 = <&qup_i2c0_default>;
 762                                 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 763                                 #address-cells = <1>;
 764                                 #size-cells = <0>;
 765                                 status = "disabled";
 766                         };
 767
 768                         spi0: spi@880000 {
 769                                 compatible = "qcom,geni-spi";
 770                                 reg = <0 0x00880000 0 0x4000>;
 771                                 clock-names = "se";
 772                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 773                                 pinctrl-names = "default";
 774                                 pinctrl-0 = <&qup_spi0_default>;
 775                                 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 776                                 #address-cells = <1>;
 777                                 #size-cells = <0>;
 778                                 status = "disabled";
 779                         };
 780
 781                         uart0: serial@880000 {
 782                                 compatible = "qcom,geni-uart";
 783                                 reg = <0 0x00880000 0 0x4000>;
 784                                 clock-names = "se";
 785                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 786                                 pinctrl-names = "default";
 787                                 pinctrl-0 = <&qup_uart0_default>;
 788                                 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 789                                 status = "disabled";
 790                         };
 791
 792                         i2c1: i2c@884000 {
 793                                 compatible = "qcom,geni-i2c";
 794                                 reg = <0 0x00884000 0 0x4000>;
 795                                 clock-names = "se";
 796                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 797                                 pinctrl-names = "default";
 798                                 pinctrl-0 = <&qup_i2c1_default>;
 799                                 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 800                                 #address-cells = <1>;
 801                                 #size-cells = <0>;
 802                                 status = "disabled";
 803                         };
 804
 805                         spi1: spi@884000 {
 806                                 compatible = "qcom,geni-spi";
 807                                 reg = <0 0x00884000 0 0x4000>;
 808                                 clock-names = "se";
 809                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 810                                 pinctrl-names = "default";
 811                                 pinctrl-0 = <&qup_spi1_default>;
 812                                 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 813                                 #address-cells = <1>;
 814                                 #size-cells = <0>;
 815                                 status = "disabled";
 816                         };
 817
 818                         uart1: serial@884000 {
 819                                 compatible = "qcom,geni-uart";
 820                                 reg = <0 0x00884000 0 0x4000>;
 821                                 clock-names = "se";
 822                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 823                                 pinctrl-names = "default";
 824                                 pinctrl-0 = <&qup_uart1_default>;
 825                                 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 826                                 status = "disabled";
 827                         };
 828
 829                         i2c2: i2c@888000 {
 830                                 compatible = "qcom,geni-i2c";
 831                                 reg = <0 0x00888000 0 0x4000>;
 832                                 clock-names = "se";
 833                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 834                                 pinctrl-names = "default";
 835                                 pinctrl-0 = <&qup_i2c2_default>;
 836                                 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 837                                 #address-cells = <1>;
 838                                 #size-cells = <0>;
 839                                 status = "disabled";
 840                         };
 841
 842                         spi2: spi@888000 {
 843                                 compatible = "qcom,geni-spi";
 844                                 reg = <0 0x00888000 0 0x4000>;
 845                                 clock-names = "se";
 846                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 847                                 pinctrl-names = "default";
 848                                 pinctrl-0 = <&qup_spi2_default>;
 849                                 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 850                                 #address-cells = <1>;
 851                                 #size-cells = <0>;
 852                                 status = "disabled";
 853                         };
 854
 855                         uart2: serial@888000 {
 856                                 compatible = "qcom,geni-uart";
 857                                 reg = <0 0x00888000 0 0x4000>;
 858                                 clock-names = "se";
 859                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 860                                 pinctrl-names = "default";
 861                                 pinctrl-0 = <&qup_uart2_default>;
 862                                 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 863                                 status = "disabled";
 864                         };
 865
 866                         i2c3: i2c@88c000 {
 867                                 compatible = "qcom,geni-i2c";
 868                                 reg = <0 0x0088c000 0 0x4000>;
 869                                 clock-names = "se";
 870                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 871                                 pinctrl-names = "default";
 872                                 pinctrl-0 = <&qup_i2c3_default>;
 873                                 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 874                                 #address-cells = <1>;
 875                                 #size-cells = <0>;
 876                                 status = "disabled";
 877                         };
 878
 879                         spi3: spi@88c000 {
 880                                 compatible = "qcom,geni-spi";
 881                                 reg = <0 0x0088c000 0 0x4000>;
 882                                 clock-names = "se";
 883                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 884                                 pinctrl-names = "default";
 885                                 pinctrl-0 = <&qup_spi3_default>;
 886                                 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 887                                 #address-cells = <1>;
 888                                 #size-cells = <0>;
 889                                 status = "disabled";
 890                         };
 891
 892                         uart3: serial@88c000 {
 893                                 compatible = "qcom,geni-uart";
 894                                 reg = <0 0x0088c000 0 0x4000>;
 895                                 clock-names = "se";
 896                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 897                                 pinctrl-names = "default";
 898                                 pinctrl-0 = <&qup_uart3_default>;
 899                                 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 900                                 status = "disabled";
 901                         };
 902
 903                         i2c4: i2c@890000 {
 904                                 compatible = "qcom,geni-i2c";
 905                                 reg = <0 0x00890000 0 0x4000>;
 906                                 clock-names = "se";
 907                                 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 908                                 pinctrl-names = "default";
 909                                 pinctrl-0 = <&qup_i2c4_default>;
 910                                 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 911                                 #address-cells = <1>;
 912                                 #size-cells = <0>;
 913                                 status = "disabled";
 914                         };
 915
 916                         spi4: spi@890000 {
 917                                 compatible = "qcom,geni-spi";
 918                                 reg = <0 0x00890000 0 0x4000>;
 919                                 clock-names = "se";
 920                                 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 921                                 pinctrl-names = "default";
 922                                 pinctrl-0 = <&qup_spi4_default>;
 923                                 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 924                                 #address-cells = <1>;
 925                                 #size-cells = <0>;
 926                                 status = "disabled";
 927                         };
 928
 929                         uart4: serial@890000 {
 930                                 compatible = "qcom,geni-uart";
 931                                 reg = <0 0x00890000 0 0x4000>;
 932                                 clock-names = "se";
 933                                 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 934                                 pinctrl-names = "default";
 935                                 pinctrl-0 = <&qup_uart4_default>;
 936                                 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 937                                 status = "disabled";
 938                         };
 939
 940                         i2c5: i2c@894000 {
 941                                 compatible = "qcom,geni-i2c";
 942                                 reg = <0 0x00894000 0 0x4000>;
 943                                 clock-names = "se";
 944                                 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 945                                 pinctrl-names = "default";
 946                                 pinctrl-0 = <&qup_i2c5_default>;
 947                                 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 948                                 #address-cells = <1>;
 949                                 #size-cells = <0>;
 950                                 status = "disabled";
 951                         };
 952
 953                         spi5: spi@894000 {
 954                                 compatible = "qcom,geni-spi";
 955                                 reg = <0 0x00894000 0 0x4000>;
 956                                 clock-names = "se";
 957                                 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 958                                 pinctrl-names = "default";
 959                                 pinctrl-0 = <&qup_spi5_default>;
 960                                 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 961                                 #address-cells = <1>;
 962                                 #size-cells = <0>;
 963                                 status = "disabled";
 964                         };
 965
 966                         uart5: serial@894000 {
 967                                 compatible = "qcom,geni-uart";
 968                                 reg = <0 0x00894000 0 0x4000>;
 969                                 clock-names = "se";
 970                                 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 971                                 pinctrl-names = "default";
 972                                 pinctrl-0 = <&qup_uart5_default>;
 973                                 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 974                                 status = "disabled";
 975                         };
 976
 977                         i2c6: i2c@898000 {
 978                                 compatible = "qcom,geni-i2c";
 979                                 reg = <0 0x00898000 0 0x4000>;
 980                                 clock-names = "se";
 981                                 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
 982                                 pinctrl-names = "default";
 983                                 pinctrl-0 = <&qup_i2c6_default>;
 984                                 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
 985                                 #address-cells = <1>;
 986                                 #size-cells = <0>;
 987                                 status = "disabled";
 988                         };
 989
 990                         spi6: spi@898000 {
 991                                 compatible = "qcom,geni-spi";
 992                                 reg = <0 0x00898000 0 0x4000>;
 993                                 clock-names = "se";
 994                                 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
 995                                 pinctrl-names = "default";
 996                                 pinctrl-0 = <&qup_spi6_default>;
 997                                 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
 998                                 #address-cells = <1>;
 999                                 #size-cells = <0>;
1000                                 status = "disabled";
1001                         };
1002
1003                         uart6: serial@898000 {
1004                                 compatible = "qcom,geni-uart";
1005                                 reg = <0 0x00898000 0 0x4000>;
1006                                 clock-names = "se";
1007                                 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1008                                 pinctrl-names = "default";
1009                                 pinctrl-0 = <&qup_uart6_default>;
1010                                 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1011                                 status = "disabled";
1012                         };
1013
1014                         i2c7: i2c@89c000 {
1015                                 compatible = "qcom,geni-i2c";
1016                                 reg = <0 0x0089c000 0 0x4000>;
1017                                 clock-names = "se";
1018                                 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1019                                 pinctrl-names = "default";
1020                                 pinctrl-0 = <&qup_i2c7_default>;
1021                                 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1022                                 #address-cells = <1>;
1023                                 #size-cells = <0>;
1024                                 status = "disabled";
1025                         };
1026
1027                         spi7: spi@89c000 {
1028                                 compatible = "qcom,geni-spi";
1029                                 reg = <0 0x0089c000 0 0x4000>;
1030                                 clock-names = "se";
1031                                 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1032                                 pinctrl-names = "default";
1033                                 pinctrl-0 = <&qup_spi7_default>;
1034                                 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1035                                 #address-cells = <1>;
1036                                 #size-cells = <0>;
1037                                 status = "disabled";
1038                         };
1039
1040                         uart7: serial@89c000 {
1041                                 compatible = "qcom,geni-uart";
1042                                 reg = <0 0x0089c000 0 0x4000>;
1043                                 clock-names = "se";
1044                                 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1045                                 pinctrl-names = "default";
1046                                 pinctrl-0 = <&qup_uart7_default>;
1047                                 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1048                                 status = "disabled";
1049                         };
1050                 };
1051
1052                 qupv3_id_1: geniqup@ac0000 {
1053                         compatible = "qcom,geni-se-qup";
1054                         reg = <0 0x00ac0000 0 0x6000>;
1055                         clock-names = "m-ahb", "s-ahb";
1056                         clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1057                                  <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1058                         #address-cells = <2>;
1059                         #size-cells = <2>;
1060                         ranges;
1061                         status = "disabled";
1062
1063                         i2c8: i2c@a80000 {
1064                                 compatible = "qcom,geni-i2c";
1065                                 reg = <0 0x00a80000 0 0x4000>;
1066                                 clock-names = "se";
1067                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1068                                 pinctrl-names = "default";
1069                                 pinctrl-0 = <&qup_i2c8_default>;
1070                                 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1071                                 #address-cells = <1>;
1072                                 #size-cells = <0>;
1073                                 status = "disabled";
1074                         };
1075
1076                         spi8: spi@a80000 {
1077                                 compatible = "qcom,geni-spi";
1078                                 reg = <0 0x00a80000 0 0x4000>;
1079                                 clock-names = "se";
1080                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1081                                 pinctrl-names = "default";
1082                                 pinctrl-0 = <&qup_spi8_default>;
1083                                 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1084                                 #address-cells = <1>;
1085                                 #size-cells = <0>;
1086                                 status = "disabled";
1087                         };
1088
1089                         uart8: serial@a80000 {
1090                                 compatible = "qcom,geni-uart";
1091                                 reg = <0 0x00a80000 0 0x4000>;
1092                                 clock-names = "se";
1093                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1094                                 pinctrl-names = "default";
1095                                 pinctrl-0 = <&qup_uart8_default>;
1096                                 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1097                                 status = "disabled";
1098                         };
1099
1100                         i2c9: i2c@a84000 {
1101                                 compatible = "qcom,geni-i2c";
1102                                 reg = <0 0x00a84000 0 0x4000>;
1103                                 clock-names = "se";
1104                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1105                                 pinctrl-names = "default";
1106                                 pinctrl-0 = <&qup_i2c9_default>;
1107                                 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1108                                 #address-cells = <1>;
1109                                 #size-cells = <0>;
1110                                 status = "disabled";
1111                         };
1112
1113                         spi9: spi@a84000 {
1114                                 compatible = "qcom,geni-spi";
1115                                 reg = <0 0x00a84000 0 0x4000>;
1116                                 clock-names = "se";
1117                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1118                                 pinctrl-names = "default";
1119                                 pinctrl-0 = <&qup_spi9_default>;
1120                                 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1121                                 #address-cells = <1>;
1122                                 #size-cells = <0>;
1123                                 status = "disabled";
1124                         };
1125
1126                         uart9: serial@a84000 {
1127                                 compatible = "qcom,geni-debug-uart";
1128                                 reg = <0 0x00a84000 0 0x4000>;
1129                                 clock-names = "se";
1130                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1131                                 pinctrl-names = "default";
1132                                 pinctrl-0 = <&qup_uart9_default>;
1133                                 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1134                                 status = "disabled";
1135                         };
1136
1137                         i2c10: i2c@a88000 {
1138                                 compatible = "qcom,geni-i2c";
1139                                 reg = <0 0x00a88000 0 0x4000>;
1140                                 clock-names = "se";
1141                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1142                                 pinctrl-names = "default";
1143                                 pinctrl-0 = <&qup_i2c10_default>;
1144                                 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1145                                 #address-cells = <1>;
1146                                 #size-cells = <0>;
1147                                 status = "disabled";
1148                         };
1149
1150                         spi10: spi@a88000 {
1151                                 compatible = "qcom,geni-spi";
1152                                 reg = <0 0x00a88000 0 0x4000>;
1153                                 clock-names = "se";
1154                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1155                                 pinctrl-names = "default";
1156                                 pinctrl-0 = <&qup_spi10_default>;
1157                                 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1158                                 #address-cells = <1>;
1159                                 #size-cells = <0>;
1160                                 status = "disabled";
1161                         };
1162
1163                         uart10: serial@a88000 {
1164                                 compatible = "qcom,geni-uart";
1165                                 reg = <0 0x00a88000 0 0x4000>;
1166                                 clock-names = "se";
1167                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1168                                 pinctrl-names = "default";
1169                                 pinctrl-0 = <&qup_uart10_default>;
1170                                 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1171                                 status = "disabled";
1172                         };
1173
1174                         i2c11: i2c@a8c000 {
1175                                 compatible = "qcom,geni-i2c";
1176                                 reg = <0 0x00a8c000 0 0x4000>;
1177                                 clock-names = "se";
1178                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1179                                 pinctrl-names = "default";
1180                                 pinctrl-0 = <&qup_i2c11_default>;
1181                                 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1182                                 #address-cells = <1>;
1183                                 #size-cells = <0>;
1184                                 status = "disabled";
1185                         };
1186
1187                         spi11: spi@a8c000 {
1188                                 compatible = "qcom,geni-spi";
1189                                 reg = <0 0x00a8c000 0 0x4000>;
1190                                 clock-names = "se";
1191                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1192                                 pinctrl-names = "default";
1193                                 pinctrl-0 = <&qup_spi11_default>;
1194                                 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1195                                 #address-cells = <1>;
1196                                 #size-cells = <0>;
1197                                 status = "disabled";
1198                         };
1199
1200                         uart11: serial@a8c000 {
1201                                 compatible = "qcom,geni-uart";
1202                                 reg = <0 0x00a8c000 0 0x4000>;
1203                                 clock-names = "se";
1204                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1205                                 pinctrl-names = "default";
1206                                 pinctrl-0 = <&qup_uart11_default>;
1207                                 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1208                                 status = "disabled";
1209                         };
1210
1211                         i2c12: i2c@a90000 {
1212                                 compatible = "qcom,geni-i2c";
1213                                 reg = <0 0x00a90000 0 0x4000>;
1214                                 clock-names = "se";
1215                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1216                                 pinctrl-names = "default";
1217                                 pinctrl-0 = <&qup_i2c12_default>;
1218                                 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1219                                 #address-cells = <1>;
1220                                 #size-cells = <0>;
1221                                 status = "disabled";
1222                         };
1223
1224                         spi12: spi@a90000 {
1225                                 compatible = "qcom,geni-spi";
1226                                 reg = <0 0x00a90000 0 0x4000>;
1227                                 clock-names = "se";
1228                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1229                                 pinctrl-names = "default";
1230                                 pinctrl-0 = <&qup_spi12_default>;
1231                                 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1232                                 #address-cells = <1>;
1233                                 #size-cells = <0>;
1234                                 status = "disabled";
1235                         };
1236
1237                         uart12: serial@a90000 {
1238                                 compatible = "qcom,geni-uart";
1239                                 reg = <0 0x00a90000 0 0x4000>;
1240                                 clock-names = "se";
1241                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1242                                 pinctrl-names = "default";
1243                                 pinctrl-0 = <&qup_uart12_default>;
1244                                 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1245                                 status = "disabled";
1246                         };
1247
1248                         i2c13: i2c@a94000 {
1249                                 compatible = "qcom,geni-i2c";
1250                                 reg = <0 0x00a94000 0 0x4000>;
1251                                 clock-names = "se";
1252                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1253                                 pinctrl-names = "default";
1254                                 pinctrl-0 = <&qup_i2c13_default>;
1255                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1256                                 #address-cells = <1>;
1257                                 #size-cells = <0>;
1258                                 status = "disabled";
1259                         };
1260
1261                         spi13: spi@a94000 {
1262                                 compatible = "qcom,geni-spi";
1263                                 reg = <0 0x00a94000 0 0x4000>;
1264                                 clock-names = "se";
1265                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1266                                 pinctrl-names = "default";
1267                                 pinctrl-0 = <&qup_spi13_default>;
1268                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1269                                 #address-cells = <1>;
1270                                 #size-cells = <0>;
1271                                 status = "disabled";
1272                         };
1273
1274                         uart13: serial@a94000 {
1275                                 compatible = "qcom,geni-uart";
1276                                 reg = <0 0x00a94000 0 0x4000>;
1277                                 clock-names = "se";
1278                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1279                                 pinctrl-names = "default";
1280                                 pinctrl-0 = <&qup_uart13_default>;
1281                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1282                                 status = "disabled";
1283                         };
1284
1285                         i2c14: i2c@a98000 {
1286                                 compatible = "qcom,geni-i2c";
1287                                 reg = <0 0x00a98000 0 0x4000>;
1288                                 clock-names = "se";
1289                                 clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1290                                 pinctrl-names = "default";
1291                                 pinctrl-0 = <&qup_i2c14_default>;
1292                                 interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
1293                                 #address-cells = <1>;
1294                                 #size-cells = <0>;
1295                                 status = "disabled";
1296                         };
1297
1298                         spi14: spi@a98000 {
1299                                 compatible = "qcom,geni-spi";
1300                                 reg = <0 0x00a98000 0 0x4000>;
1301                                 clock-names = "se";
1302                                 clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1303                                 pinctrl-names = "default";
1304                                 pinctrl-0 = <&qup_spi14_default>;
1305                                 interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
1306                                 #address-cells = <1>;
1307                                 #size-cells = <0>;
1308                                 status = "disabled";
1309                         };
1310
1311                         uart14: serial@a98000 {
1312                                 compatible = "qcom,geni-uart";
1313                                 reg = <0 0x00a98000 0 0x4000>;
1314                                 clock-names = "se";
1315                                 clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1316                                 pinctrl-names = "default";
1317                                 pinctrl-0 = <&qup_uart14_default>;
1318                                 interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
1319                                 status = "disabled";
1320                         };
1321
1322                         i2c15: i2c@a9c000 {
1323                                 compatible = "qcom,geni-i2c";
1324                                 reg = <0 0x00a9c000 0 0x4000>;
1325                                 clock-names = "se";
1326                                 clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
1327                                 pinctrl-names = "default";
1328                                 pinctrl-0 = <&qup_i2c15_default>;
1329                                 interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
1330                                 #address-cells = <1>;
1331                                 #size-cells = <0>;
1332                                 status = "disabled";
1333                         };
1334
1335                         spi15: spi@a9c000 {
1336                                 compatible = "qcom,geni-spi";
1337                                 reg = <0 0x00a9c000 0 0x4000>;
1338                                 clock-names = "se";
1339                                 clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
1340                                 pinctrl-names = "default";
1341                                 pinctrl-0 = <&qup_spi15_default>;
1342                                 interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
1343                                 #address-cells = <1>;
1344                                 #size-cells = <0>;
1345                                 status = "disabled";
1346                         };
1347
1348                         uart15: serial@a9c000 {
1349                                 compatible = "qcom,geni-uart";
1350                                 reg = <0 0x00a9c000 0 0x4000>;
1351                                 clock-names = "se";
1352                                 clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
1353                                 pinctrl-names = "default";
1354                                 pinctrl-0 = <&qup_uart15_default>;
1355                                 interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
1356                                 status = "disabled";
1357                         };
1358                 };
1359
1360                 cache-controller@1100000 {
1361                         compatible = "qcom,sdm845-llcc";
1362                         reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>;
1363                         reg-names = "llcc_base", "llcc_broadcast_base";
1364                         interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
1365                 };
1366
1367                 ufs_mem_hc: ufshc@1d84000 {
1368                         compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
1369                                      "jedec,ufs-2.0";
1370                         reg = <0 0x01d84000 0 0x2500>;
1371                         interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
1372                         phys = <&ufs_mem_phy_lanes>;
1373                         phy-names = "ufsphy";
1374                         lanes-per-direction = <2>;
1375                         power-domains = <&gcc UFS_PHY_GDSC>;
1376                         #reset-cells = <1>;
1377
1378                         iommus = <&apps_smmu 0x100 0xf>;
1379
1380                         clock-names =
1381                                 "core_clk",
1382                                 "bus_aggr_clk",
1383                                 "iface_clk",
1384                                 "core_clk_unipro",
1385                                 "ref_clk",
1386                                 "tx_lane0_sync_clk",
1387                                 "rx_lane0_sync_clk",
1388                                 "rx_lane1_sync_clk";
1389                         clocks =
1390                                 <&gcc GCC_UFS_PHY_AXI_CLK>,
1391                                 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
1392                                 <&gcc GCC_UFS_PHY_AHB_CLK>,
1393                                 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
1394                                 <&rpmhcc RPMH_CXO_CLK>,
1395                                 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
1396                                 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
1397                                 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
1398                         freq-table-hz =
1399                                 <50000000 200000000>,
1400                                 <0 0>,
1401                                 <0 0>,
1402                                 <37500000 150000000>,
1403                                 <0 0>,
1404                                 <0 0>,
1405                                 <0 0>,
1406                                 <0 0>;
1407
1408                         status = "disabled";
1409                 };
1410
1411                 ufs_mem_phy: phy@1d87000 {
1412                         compatible = "qcom,sdm845-qmp-ufs-phy";
1413                         reg = <0 0x01d87000 0 0x18c>;
1414                         #address-cells = <2>;
1415                         #size-cells = <2>;
1416                         ranges;
1417                         clock-names = "ref",
1418                                       "ref_aux";
1419                         clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
1420                                  <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
1421
1422                         resets = <&ufs_mem_hc 0>;
1423                         reset-names = "ufsphy";
1424                         status = "disabled";
1425
1426                         ufs_mem_phy_lanes: lanes@1d87400 {
1427                                 reg = <0 0x01d87400 0 0x108>,
1428                                       <0 0x01d87600 0 0x1e0>,
1429                                       <0 0x01d87c00 0 0x1dc>,
1430                                       <0 0x01d87800 0 0x108>,
1431                                       <0 0x01d87a00 0 0x1e0>;
1432                                 #phy-cells = <0>;
1433                         };
1434                 };
1435
1436                 tcsr_mutex_regs: syscon@1f40000 {
1437                         compatible = "syscon";
1438                         reg = <0 0x01f40000 0 0x40000>;
1439                 };
1440
1441                 tlmm: pinctrl@3400000 {
1442                         compatible = "qcom,sdm845-pinctrl";
1443                         reg = <0 0x03400000 0 0xc00000>;
1444                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1445                         gpio-controller;
1446                         #gpio-cells = <2>;
1447                         interrupt-controller;
1448                         #interrupt-cells = <2>;
1449                         gpio-ranges = <&tlmm 0 0 150>;
1450
1451                         qspi_clk: qspi-clk {
1452                                 pinmux {
1453                                         pins = "gpio95";
1454                                         function = "qspi_clk";
1455                                 };
1456                         };
1457
1458                         qspi_cs0: qspi-cs0 {
1459                                 pinmux {
1460                                         pins = "gpio90";
1461                                         function = "qspi_cs";
1462                                 };
1463                         };
1464
1465                         qspi_cs1: qspi-cs1 {
1466                                 pinmux {
1467                                         pins = "gpio89";
1468                                         function = "qspi_cs";
1469                                 };
1470                         };
1471
1472                         qspi_data01: qspi-data01 {
1473                                 pinmux-data {
1474                                         pins = "gpio91", "gpio92";
1475                                         function = "qspi_data";
1476                                 };
1477                         };
1478
1479                         qspi_data12: qspi-data12 {
1480                                 pinmux-data {
1481                                         pins = "gpio93", "gpio94";
1482                                         function = "qspi_data";
1483                                 };
1484                         };
1485
1486                         qup_i2c0_default: qup-i2c0-default {
1487                                 pinmux {
1488                                         pins = "gpio0", "gpio1";
1489                                         function = "qup0";
1490                                 };
1491                         };
1492
1493                         qup_i2c1_default: qup-i2c1-default {
1494                                 pinmux {
1495                                         pins = "gpio17", "gpio18";
1496                                         function = "qup1";
1497                                 };
1498                         };
1499
1500                         qup_i2c2_default: qup-i2c2-default {
1501                                 pinmux {
1502                                         pins = "gpio27", "gpio28";
1503                                         function = "qup2";
1504                                 };
1505                         };
1506
1507                         qup_i2c3_default: qup-i2c3-default {
1508                                 pinmux {
1509                                         pins = "gpio41", "gpio42";
1510                                         function = "qup3";
1511                                 };
1512                         };
1513
1514                         qup_i2c4_default: qup-i2c4-default {
1515                                 pinmux {
1516                                         pins = "gpio89", "gpio90";
1517                                         function = "qup4";
1518                                 };
1519                         };
1520
1521                         qup_i2c5_default: qup-i2c5-default {
1522                                 pinmux {
1523                                         pins = "gpio85", "gpio86";
1524                                         function = "qup5";
1525                                 };
1526                         };
1527
1528                         qup_i2c6_default: qup-i2c6-default {
1529                                 pinmux {
1530                                         pins = "gpio45", "gpio46";
1531                                         function = "qup6";
1532                                 };
1533                         };
1534
1535                         qup_i2c7_default: qup-i2c7-default {
1536                                 pinmux {
1537                                         pins = "gpio93", "gpio94";
1538                                         function = "qup7";
1539                                 };
1540                         };
1541
1542                         qup_i2c8_default: qup-i2c8-default {
1543                                 pinmux {
1544                                         pins = "gpio65", "gpio66";
1545                                         function = "qup8";
1546                                 };
1547                         };
1548
1549                         qup_i2c9_default: qup-i2c9-default {
1550                                 pinmux {
1551                                         pins = "gpio6", "gpio7";
1552                                         function = "qup9";
1553                                 };
1554                         };
1555
1556                         qup_i2c10_default: qup-i2c10-default {
1557                                 pinmux {
1558                                         pins = "gpio55", "gpio56";
1559                                         function = "qup10";
1560                                 };
1561                         };
1562
1563                         qup_i2c11_default: qup-i2c11-default {
1564                                 pinmux {
1565                                         pins = "gpio31", "gpio32";
1566                                         function = "qup11";
1567                                 };
1568                         };
1569
1570                         qup_i2c12_default: qup-i2c12-default {
1571                                 pinmux {
1572                                         pins = "gpio49", "gpio50";
1573                                         function = "qup12";
1574                                 };
1575                         };
1576
1577                         qup_i2c13_default: qup-i2c13-default {
1578                                 pinmux {
1579                                         pins = "gpio105", "gpio106";
1580                                         function = "qup13";
1581                                 };
1582                         };
1583
1584                         qup_i2c14_default: qup-i2c14-default {
1585                                 pinmux {
1586                                         pins = "gpio33", "gpio34";
1587                                         function = "qup14";
1588                                 };
1589                         };
1590
1591                         qup_i2c15_default: qup-i2c15-default {
1592                                 pinmux {
1593                                         pins = "gpio81", "gpio82";
1594                                         function = "qup15";
1595                                 };
1596                         };
1597
1598                         qup_spi0_default: qup-spi0-default {
1599                                 pinmux {
1600                                         pins = "gpio0", "gpio1",
1601                                                "gpio2", "gpio3";
1602                                         function = "qup0";
1603                                 };
1604                         };
1605
1606                         qup_spi1_default: qup-spi1-default {
1607                                 pinmux {
1608                                         pins = "gpio17", "gpio18",
1609                                                "gpio19", "gpio20";
1610                                         function = "qup1";
1611                                 };
1612                         };
1613
1614                         qup_spi2_default: qup-spi2-default {
1615                                 pinmux {
1616                                         pins = "gpio27", "gpio28",
1617                                                "gpio29", "gpio30";
1618                                         function = "qup2";
1619                                 };
1620                         };
1621
1622                         qup_spi3_default: qup-spi3-default {
1623                                 pinmux {
1624                                         pins = "gpio41", "gpio42",
1625                                                "gpio43", "gpio44";
1626                                         function = "qup3";
1627                                 };
1628                         };
1629
1630                         qup_spi4_default: qup-spi4-default {
1631                                 pinmux {
1632                                         pins = "gpio89", "gpio90",
1633                                                "gpio91", "gpio92";
1634                                         function = "qup4";
1635                                 };
1636                         };
1637
1638                         qup_spi5_default: qup-spi5-default {
1639                                 pinmux {
1640                                         pins = "gpio85", "gpio86",
1641                                                "gpio87", "gpio88";
1642                                         function = "qup5";
1643                                 };
1644                         };
1645
1646                         qup_spi6_default: qup-spi6-default {
1647                                 pinmux {
1648                                         pins = "gpio45", "gpio46",
1649                                                "gpio47", "gpio48";
1650                                         function = "qup6";
1651                                 };
1652                         };
1653
1654                         qup_spi7_default: qup-spi7-default {
1655                                 pinmux {
1656                                         pins = "gpio93", "gpio94",
1657                                                "gpio95", "gpio96";
1658                                         function = "qup7";
1659                                 };
1660                         };
1661
1662                         qup_spi8_default: qup-spi8-default {
1663                                 pinmux {
1664                                         pins = "gpio65", "gpio66",
1665                                                "gpio67", "gpio68";
1666                                         function = "qup8";
1667                                 };
1668                         };
1669
1670                         qup_spi9_default: qup-spi9-default {
1671                                 pinmux {
1672                                         pins = "gpio6", "gpio7",
1673                                                "gpio4", "gpio5";
1674                                         function = "qup9";
1675                                 };
1676                         };
1677
1678                         qup_spi10_default: qup-spi10-default {
1679                                 pinmux {
1680                                         pins = "gpio55", "gpio56",
1681                                                "gpio53", "gpio54";
1682                                         function = "qup10";
1683                                 };
1684                         };
1685
1686                         qup_spi11_default: qup-spi11-default {
1687                                 pinmux {
1688                                         pins = "gpio31", "gpio32",
1689                                                "gpio33", "gpio34";
1690                                         function = "qup11";
1691                                 };
1692                         };
1693
1694                         qup_spi12_default: qup-spi12-default {
1695                                 pinmux {
1696                                         pins = "gpio49", "gpio50",
1697                                                "gpio51", "gpio52";
1698                                         function = "qup12";
1699                                 };
1700                         };
1701
1702                         qup_spi13_default: qup-spi13-default {
1703                                 pinmux {
1704                                         pins = "gpio105", "gpio106",
1705                                                "gpio107", "gpio108";
1706                                         function = "qup13";
1707                                 };
1708                         };
1709
1710                         qup_spi14_default: qup-spi14-default {
1711                                 pinmux {
1712                                         pins = "gpio33", "gpio34",
1713                                                "gpio31", "gpio32";
1714                                         function = "qup14";
1715                                 };
1716                         };
1717
1718                         qup_spi15_default: qup-spi15-default {
1719                                 pinmux {
1720                                         pins = "gpio81", "gpio82",
1721                                                "gpio83", "gpio84";
1722                                         function = "qup15";
1723                                 };
1724                         };
1725
1726                         qup_uart0_default: qup-uart0-default {
1727                                 pinmux {
1728                                         pins = "gpio2", "gpio3";
1729                                         function = "qup0";
1730                                 };
1731                         };
1732
1733                         qup_uart1_default: qup-uart1-default {
1734                                 pinmux {
1735                                         pins = "gpio19", "gpio20";
1736                                         function = "qup1";
1737                                 };
1738                         };
1739
1740                         qup_uart2_default: qup-uart2-default {
1741                                 pinmux {
1742                                         pins = "gpio29", "gpio30";
1743                                         function = "qup2";
1744                                 };
1745                         };
1746
1747                         qup_uart3_default: qup-uart3-default {
1748                                 pinmux {
1749                                         pins = "gpio43", "gpio44";
1750                                         function = "qup3";
1751                                 };
1752                         };
1753
1754                         qup_uart4_default: qup-uart4-default {
1755                                 pinmux {
1756                                         pins = "gpio91", "gpio92";
1757                                         function = "qup4";
1758                                 };
1759                         };
1760
1761                         qup_uart5_default: qup-uart5-default {
1762                                 pinmux {
1763                                         pins = "gpio87", "gpio88";
1764                                         function = "qup5";
1765                                 };
1766                         };
1767
1768                         qup_uart6_default: qup-uart6-default {
1769                                 pinmux {
1770                                         pins = "gpio47", "gpio48";
1771                                         function = "qup6";
1772                                 };
1773                         };
1774
1775                         qup_uart7_default: qup-uart7-default {
1776                                 pinmux {
1777                                         pins = "gpio95", "gpio96";
1778                                         function = "qup7";
1779                                 };
1780                         };
1781
1782                         qup_uart8_default: qup-uart8-default {
1783                                 pinmux {
1784                                         pins = "gpio67", "gpio68";
1785                                         function = "qup8";
1786                                 };
1787                         };
1788
1789                         qup_uart9_default: qup-uart9-default {
1790                                 pinmux {
1791                                         pins = "gpio4", "gpio5";
1792                                         function = "qup9";
1793                                 };
1794                         };
1795
1796                         qup_uart10_default: qup-uart10-default {
1797                                 pinmux {
1798                                         pins = "gpio53", "gpio54";
1799                                         function = "qup10";
1800                                 };
1801                         };
1802
1803                         qup_uart11_default: qup-uart11-default {
1804                                 pinmux {
1805                                         pins = "gpio33", "gpio34";
1806                                         function = "qup11";
1807                                 };
1808                         };
1809
1810                         qup_uart12_default: qup-uart12-default {
1811                                 pinmux {
1812                                         pins = "gpio51", "gpio52";
1813                                         function = "qup12";
1814                                 };
1815                         };
1816
1817                         qup_uart13_default: qup-uart13-default {
1818                                 pinmux {
1819                                         pins = "gpio107", "gpio108";
1820                                         function = "qup13";
1821                                 };
1822                         };
1823
1824                         qup_uart14_default: qup-uart14-default {
1825                                 pinmux {
1826                                         pins = "gpio31", "gpio32";
1827                                         function = "qup14";
1828                                 };
1829                         };
1830
1831                         qup_uart15_default: qup-uart15-default {
1832                                 pinmux {
1833                                         pins = "gpio83", "gpio84";
1834                                         function = "qup15";
1835                                 };
1836                         };
1837                 };
1838
1839                 mss_pil: remoteproc@4080000 {
1840                         compatible = "qcom,sdm845-mss-pil";
1841                         reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>;
1842                         reg-names = "qdsp6", "rmb";
1843
1844                         interrupts-extended =
1845                                 <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
1846                                 <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1847                                 <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1848                                 <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1849                                 <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
1850                                 <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
1851                         interrupt-names = "wdog", "fatal", "ready",
1852                                           "handover", "stop-ack",
1853                                           "shutdown-ack";
1854
1855                         clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
1856                                  <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
1857                                  <&gcc GCC_BOOT_ROM_AHB_CLK>,
1858                                  <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
1859                                  <&gcc GCC_MSS_SNOC_AXI_CLK>,
1860                                  <&gcc GCC_MSS_MFAB_AXIS_CLK>,
1861                                  <&gcc GCC_PRNG_AHB_CLK>,
1862                                  <&rpmhcc RPMH_CXO_CLK>;
1863                         clock-names = "iface", "bus", "mem", "gpll0_mss",
1864                                       "snoc_axi", "mnoc_axi", "prng", "xo";
1865
1866                         qcom,smem-states = <&modem_smp2p_out 0>;
1867                         qcom,smem-state-names = "stop";
1868
1869                         resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
1870                                  <&pdc_reset PDC_MODEM_SYNC_RESET>;
1871                         reset-names = "mss_restart", "pdc_reset";
1872
1873                         qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
1874
1875                         power-domains = <&aoss_qmp 2>,
1876                                         <&rpmhpd SDM845_CX>,
1877                                         <&rpmhpd SDM845_MX>,
1878                                         <&rpmhpd SDM845_MSS>;
1879                         power-domain-names = "load_state", "cx", "mx", "mss";
1880
1881                         mba {
1882                                 memory-region = <&mba_region>;
1883                         };
1884
1885                         mpss {
1886                                 memory-region = <&mpss_region>;
1887                         };
1888
1889                         glink-edge {
1890                                 interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
1891                                 label = "modem";
1892                                 qcom,remote-pid = <1>;
1893                                 mboxes = <&apss_shared 12>;
1894                         };
1895                 };
1896
1897                 gpucc: clock-controller@5090000 {
1898                         compatible = "qcom,sdm845-gpucc";
1899                         reg = <0 0x05090000 0 0x9000>;
1900                         #clock-cells = <1>;
1901                         #reset-cells = <1>;
1902                         #power-domain-cells = <1>;
1903                         clocks = <&rpmhcc RPMH_CXO_CLK>;
1904                         clock-names = "xo";
1905                 };
1906
1907                 stm@6002000 {
1908                         compatible = "arm,coresight-stm", "arm,primecell";
1909                         reg = <0 0x06002000 0 0x1000>,
1910                               <0 0x16280000 0 0x180000>;
1911                         reg-names = "stm-base", "stm-stimulus-base";
1912
1913                         clocks = <&aoss_qmp>;
1914                         clock-names = "apb_pclk";
1915
1916                         out-ports {
1917                                 port {
1918                                         stm_out: endpoint {
1919                                                 remote-endpoint =
1920                                                   <&funnel0_in7>;
1921                                         };
1922                                 };
1923                         };
1924                 };
1925
1926                 funnel@6041000 {
1927                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1928                         reg = <0 0x06041000 0 0x1000>;
1929
1930                         clocks = <&aoss_qmp>;
1931                         clock-names = "apb_pclk";
1932
1933                         out-ports {
1934                                 port {
1935                                         funnel0_out: endpoint {
1936                                                 remote-endpoint =
1937                                                   <&merge_funnel_in0>;
1938                                         };
1939                                 };
1940                         };
1941
1942                         in-ports {
1943                                 #address-cells = <1>;
1944                                 #size-cells = <0>;
1945
1946                                 port@7 {
1947                                         reg = <7>;
1948                                         funnel0_in7: endpoint {
1949                                                 remote-endpoint = <&stm_out>;
1950                                         };
1951                                 };
1952                         };
1953                 };
1954
1955                 funnel@6043000 {
1956                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1957                         reg = <0 0x06043000 0 0x1000>;
1958
1959                         clocks = <&aoss_qmp>;
1960                         clock-names = "apb_pclk";
1961
1962                         out-ports {
1963                                 port {
1964                                         funnel2_out: endpoint {
1965                                                 remote-endpoint =
1966                                                   <&merge_funnel_in2>;
1967                                         };
1968                                 };
1969                         };
1970
1971                         in-ports {
1972                                 #address-cells = <1>;
1973                                 #size-cells = <0>;
1974
1975                                 port@5 {
1976                                         reg = <5>;
1977                                         funnel2_in5: endpoint {
1978                                                 remote-endpoint =
1979                                                   <&apss_merge_funnel_out>;
1980                                         };
1981                                 };
1982                         };
1983                 };
1984
1985                 funnel@6045000 {
1986                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1987                         reg = <0 0x06045000 0 0x1000>;
1988
1989                         clocks = <&aoss_qmp>;
1990                         clock-names = "apb_pclk";
1991
1992                         out-ports {
1993                                 port {
1994                                         merge_funnel_out: endpoint {
1995                                                 remote-endpoint = <&etf_in>;
1996                                         };
1997                                 };
1998                         };
1999
2000                         in-ports {
2001                                 #address-cells = <1>;
2002                                 #size-cells = <0>;
2003
2004                                 port@0 {
2005                                         reg = <0>;
2006                                         merge_funnel_in0: endpoint {
2007                                                 remote-endpoint =
2008                                                   <&funnel0_out>;
2009                                         };
2010                                 };
2011
2012                                 port@2 {
2013                                         reg = <2>;
2014                                         merge_funnel_in2: endpoint {
2015                                                 remote-endpoint =
2016                                                   <&funnel2_out>;
2017                                         };
2018                                 };
2019                         };
2020                 };
2021
2022                 replicator@6046000 {
2023                         compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
2024                         reg = <0 0x06046000 0 0x1000>;
2025
2026                         clocks = <&aoss_qmp>;
2027                         clock-names = "apb_pclk";
2028
2029                         out-ports {
2030                                 port {
2031                                         replicator_out: endpoint {
2032                                                 remote-endpoint = <&etr_in>;
2033                                         };
2034                                 };
2035                         };
2036
2037                         in-ports {
2038                                 port {
2039                                         replicator_in: endpoint {
2040                                                 remote-endpoint = <&etf_out>;
2041                                         };
2042                                 };
2043                         };
2044                 };
2045
2046                 etf@6047000 {
2047                         compatible = "arm,coresight-tmc", "arm,primecell";
2048                         reg = <0 0x06047000 0 0x1000>;
2049
2050                         clocks = <&aoss_qmp>;
2051                         clock-names = "apb_pclk";
2052
2053                         out-ports {
2054                                 port {
2055                                         etf_out: endpoint {
2056                                                 remote-endpoint =
2057                                                   <&replicator_in>;
2058                                         };
2059                                 };
2060                         };
2061
2062                         in-ports {
2063                                 #address-cells = <1>;
2064                                 #size-cells = <0>;
2065
2066                                 port@1 {
2067                                         reg = <1>;
2068                                         etf_in: endpoint {
2069                                                 remote-endpoint =
2070                                                   <&merge_funnel_out>;
2071                                         };
2072                                 };
2073                         };
2074                 };
2075
2076                 etr@6048000 {
2077                         compatible = "arm,coresight-tmc", "arm,primecell";
2078                         reg = <0 0x06048000 0 0x1000>;
2079
2080                         clocks = <&aoss_qmp>;
2081                         clock-names = "apb_pclk";
2082                         arm,scatter-gather;
2083
2084                         in-ports {
2085                                 port {
2086                                         etr_in: endpoint {
2087                                                 remote-endpoint =
2088                                                   <&replicator_out>;
2089                                         };
2090                                 };
2091                         };
2092                 };
2093
2094                 etm@7040000 {
2095                         compatible = "arm,coresight-etm4x", "arm,primecell";
2096                         reg = <0 0x07040000 0 0x1000>;
2097
2098                         cpu = <&CPU0>;
2099
2100                         clocks = <&aoss_qmp>;
2101                         clock-names = "apb_pclk";
2102
2103                         out-ports {
2104                                 port {
2105                                         etm0_out: endpoint {
2106                                                 remote-endpoint =
2107                                                   <&apss_funnel_in0>;
2108                                         };
2109                                 };
2110                         };
2111                 };
2112
2113                 etm@7140000 {
2114                         compatible = "arm,coresight-etm4x", "arm,primecell";
2115                         reg = <0 0x07140000 0 0x1000>;
2116
2117                         cpu = <&CPU1>;
2118
2119                         clocks = <&aoss_qmp>;
2120                         clock-names = "apb_pclk";
2121
2122                         out-ports {
2123                                 port {
2124                                         etm1_out: endpoint {
2125                                                 remote-endpoint =
2126                                                   <&apss_funnel_in1>;
2127                                         };
2128                                 };
2129                         };
2130                 };
2131
2132                 etm@7240000 {
2133                         compatible = "arm,coresight-etm4x", "arm,primecell";
2134                         reg = <0 0x07240000 0 0x1000>;
2135
2136                         cpu = <&CPU2>;
2137
2138                         clocks = <&aoss_qmp>;
2139                         clock-names = "apb_pclk";
2140
2141                         out-ports {
2142                                 port {
2143                                         etm2_out: endpoint {
2144                                                 remote-endpoint =
2145                                                   <&apss_funnel_in2>;
2146                                         };
2147                                 };
2148                         };
2149                 };
2150
2151                 etm@7340000 {
2152                         compatible = "arm,coresight-etm4x", "arm,primecell";
2153                         reg = <0 0x07340000 0 0x1000>;
2154
2155                         cpu = <&CPU3>;
2156
2157                         clocks = <&aoss_qmp>;
2158                         clock-names = "apb_pclk";
2159
2160                         out-ports {
2161                                 port {
2162                                         etm3_out: endpoint {
2163                                                 remote-endpoint =
2164                                                   <&apss_funnel_in3>;
2165                                         };
2166                                 };
2167                         };
2168                 };
2169
2170                 etm@7440000 {
2171                         compatible = "arm,coresight-etm4x", "arm,primecell";
2172                         reg = <0 0x07440000 0 0x1000>;
2173
2174                         cpu = <&CPU4>;
2175
2176                         clocks = <&aoss_qmp>;
2177                         clock-names = "apb_pclk";
2178
2179                         out-ports {
2180                                 port {
2181                                         etm4_out: endpoint {
2182                                                 remote-endpoint =
2183                                                   <&apss_funnel_in4>;
2184                                         };
2185                                 };
2186                         };
2187                 };
2188
2189                 etm@7540000 {
2190                         compatible = "arm,coresight-etm4x", "arm,primecell";
2191                         reg = <0 0x07540000 0 0x1000>;
2192
2193                         cpu = <&CPU5>;
2194
2195                         clocks = <&aoss_qmp>;
2196                         clock-names = "apb_pclk";
2197
2198                         out-ports {
2199                                 port {
2200                                         etm5_out: endpoint {
2201                                                 remote-endpoint =
2202                                                   <&apss_funnel_in5>;
2203                                         };
2204                                 };
2205                         };
2206                 };
2207
2208                 etm@7640000 {
2209                         compatible = "arm,coresight-etm4x", "arm,primecell";
2210                         reg = <0 0x07640000 0 0x1000>;
2211
2212                         cpu = <&CPU6>;
2213
2214                         clocks = <&aoss_qmp>;
2215                         clock-names = "apb_pclk";
2216
2217                         out-ports {
2218                                 port {
2219                                         etm6_out: endpoint {
2220                                                 remote-endpoint =
2221                                                   <&apss_funnel_in6>;
2222                                         };
2223                                 };
2224                         };
2225                 };
2226
2227                 etm@7740000 {
2228                         compatible = "arm,coresight-etm4x", "arm,primecell";
2229                         reg = <0 0x07740000 0 0x1000>;
2230
2231                         cpu = <&CPU7>;
2232
2233                         clocks = <&aoss_qmp>;
2234                         clock-names = "apb_pclk";
2235
2236                         out-ports {
2237                                 port {
2238                                         etm7_out: endpoint {
2239                                                 remote-endpoint =
2240                                                   <&apss_funnel_in7>;
2241                                         };
2242                                 };
2243                         };
2244                 };
2245
2246                 funnel@7800000 { /* APSS Funnel */
2247                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2248                         reg = <0 0x07800000 0 0x1000>;
2249
2250                         clocks = <&aoss_qmp>;
2251                         clock-names = "apb_pclk";
2252
2253                         out-ports {
2254                                 port {
2255                                         apss_funnel_out: endpoint {
2256                                                 remote-endpoint =
2257                                                   <&apss_merge_funnel_in>;
2258                                         };
2259                                 };
2260                         };
2261
2262                         in-ports {
2263                                 #address-cells = <1>;
2264                                 #size-cells = <0>;
2265
2266                                 port@0 {
2267                                         reg = <0>;
2268                                         apss_funnel_in0: endpoint {
2269                                                 remote-endpoint =
2270                                                   <&etm0_out>;
2271                                         };
2272                                 };
2273
2274                                 port@1 {
2275                                         reg = <1>;
2276                                         apss_funnel_in1: endpoint {
2277                                                 remote-endpoint =
2278                                                   <&etm1_out>;
2279                                         };
2280                                 };
2281
2282                                 port@2 {
2283                                         reg = <2>;
2284                                         apss_funnel_in2: endpoint {
2285                                                 remote-endpoint =
2286                                                   <&etm2_out>;
2287                                         };
2288                                 };
2289
2290                                 port@3 {
2291                                         reg = <3>;
2292                                         apss_funnel_in3: endpoint {
2293                                                 remote-endpoint =
2294                                                   <&etm3_out>;
2295                                         };
2296                                 };
2297
2298                                 port@4 {
2299                                         reg = <4>;
2300                                         apss_funnel_in4: endpoint {
2301                                                 remote-endpoint =
2302                                                   <&etm4_out>;
2303                                         };
2304                                 };
2305
2306                                 port@5 {
2307                                         reg = <5>;
2308                                         apss_funnel_in5: endpoint {
2309                                                 remote-endpoint =
2310                                                   <&etm5_out>;
2311                                         };
2312                                 };
2313
2314                                 port@6 {
2315                                         reg = <6>;
2316                                         apss_funnel_in6: endpoint {
2317                                                 remote-endpoint =
2318                                                   <&etm6_out>;
2319                                         };
2320                                 };
2321
2322                                 port@7 {
2323                                         reg = <7>;
2324                                         apss_funnel_in7: endpoint {
2325                                                 remote-endpoint =
2326                                                   <&etm7_out>;
2327                                         };
2328                                 };
2329                         };
2330                 };
2331
2332                 funnel@7810000 {
2333                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2334                         reg = <0 0x07810000 0 0x1000>;
2335
2336                         clocks = <&aoss_qmp>;
2337                         clock-names = "apb_pclk";
2338
2339                         out-ports {
2340                                 port {
2341                                         apss_merge_funnel_out: endpoint {
2342                                                 remote-endpoint =
2343                                                   <&funnel2_in5>;
2344                                         };
2345                                 };
2346                         };
2347
2348                         in-ports {
2349                                 port {
2350                                         apss_merge_funnel_in: endpoint {
2351                                                 remote-endpoint =
2352                                                   <&apss_funnel_out>;
2353                                         };
2354                                 };
2355                         };
2356                 };
2357
2358                 sdhc_2: sdhci@8804000 {
2359                         compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5";
2360                         reg = <0 0x08804000 0 0x1000>;
2361
2362                         interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
2363                                      <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
2364                         interrupt-names = "hc_irq", "pwr_irq";
2365
2366                         clocks = <&gcc GCC_SDCC2_AHB_CLK>,
2367                                  <&gcc GCC_SDCC2_APPS_CLK>;
2368                         clock-names = "iface", "core";
2369                         iommus = <&apps_smmu 0xa0 0xf>;
2370
2371                         status = "disabled";
2372                 };
2373
2374                 qspi: spi@88df000 {
2375                         compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
2376                         reg = <0 0x088df000 0 0x600>;
2377                         #address-cells = <1>;
2378                         #size-cells = <0>;
2379                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
2380                         clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
2381                                  <&gcc GCC_QSPI_CORE_CLK>;
2382                         clock-names = "iface", "core";
2383                         status = "disabled";
2384                 };
2385
2386                 usb_1_hsphy: phy@88e2000 {
2387                         compatible = "qcom,sdm845-qusb2-phy";
2388                         reg = <0 0x088e2000 0 0x400>;
2389                         status = "disabled";
2390                         #phy-cells = <0>;
2391
2392                         clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2393                                  <&rpmhcc RPMH_CXO_CLK>;
2394                         clock-names = "cfg_ahb", "ref";
2395
2396                         resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2397
2398                         nvmem-cells = <&qusb2p_hstx_trim>;
2399                 };
2400
2401                 usb_2_hsphy: phy@88e3000 {
2402                         compatible = "qcom,sdm845-qusb2-phy";
2403                         reg = <0 0x088e3000 0 0x400>;
2404                         status = "disabled";
2405                         #phy-cells = <0>;
2406
2407                         clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2408                                  <&rpmhcc RPMH_CXO_CLK>;
2409                         clock-names = "cfg_ahb", "ref";
2410
2411                         resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
2412
2413                         nvmem-cells = <&qusb2s_hstx_trim>;
2414                 };
2415
2416                 usb_1_qmpphy: phy@88e9000 {
2417                         compatible = "qcom,sdm845-qmp-usb3-phy";
2418                         reg = <0 0x088e9000 0 0x18c>,
2419                               <0 0x088e8000 0 0x10>;
2420                         reg-names = "reg-base", "dp_com";
2421                         status = "disabled";
2422                         #clock-cells = <1>;
2423                         #address-cells = <2>;
2424                         #size-cells = <2>;
2425                         ranges;
2426
2427                         clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
2428                                  <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2429                                  <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
2430                                  <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
2431                         clock-names = "aux", "cfg_ahb", "ref", "com_aux";
2432
2433                         resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
2434                                  <&gcc GCC_USB3_PHY_PRIM_BCR>;
2435                         reset-names = "phy", "common";
2436
2437                         usb_1_ssphy: lanes@88e9200 {
2438                                 reg = <0 0x088e9200 0 0x128>,
2439                                       <0 0x088e9400 0 0x200>,
2440                                       <0 0x088e9c00 0 0x218>,
2441                                       <0 0x088e9600 0 0x128>,
2442                                       <0 0x088e9800 0 0x200>,
2443                                       <0 0x088e9a00 0 0x100>;
2444                                 #phy-cells = <0>;
2445                                 clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
2446                                 clock-names = "pipe0";
2447                                 clock-output-names = "usb3_phy_pipe_clk_src";
2448                         };
2449                 };
2450
2451                 usb_2_qmpphy: phy@88eb000 {
2452                         compatible = "qcom,sdm845-qmp-usb3-uni-phy";
2453                         reg = <0 0x088eb000 0 0x18c>;
2454                         status = "disabled";
2455                         #clock-cells = <1>;
2456                         #address-cells = <2>;
2457                         #size-cells = <2>;
2458                         ranges;
2459
2460                         clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
2461                                  <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2462                                  <&gcc GCC_USB3_SEC_CLKREF_CLK>,
2463                                  <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
2464                         clock-names = "aux", "cfg_ahb", "ref", "com_aux";
2465
2466                         resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
2467                                  <&gcc GCC_USB3_PHY_SEC_BCR>;
2468                         reset-names = "phy", "common";
2469
2470                         usb_2_ssphy: lane@88eb200 {
2471                                 reg = <0 0x088eb200 0 0x128>,
2472                                       <0 0x088eb400 0 0x1fc>,
2473                                       <0 0x088eb800 0 0x218>,
2474                                       <0 0x088eb600 0 0x70>;
2475                                 #phy-cells = <0>;
2476                                 clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
2477                                 clock-names = "pipe0";
2478                                 clock-output-names = "usb3_uni_phy_pipe_clk_src";
2479                         };
2480                 };
2481
2482                 usb_1: usb@a6f8800 {
2483                         compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
2484                         reg = <0 0x0a6f8800 0 0x400>;
2485                         status = "disabled";
2486                         #address-cells = <2>;
2487                         #size-cells = <2>;
2488                         ranges;
2489                         dma-ranges;
2490
2491                         clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
2492                                  <&gcc GCC_USB30_PRIM_MASTER_CLK>,
2493                                  <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
2494                                  <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
2495                                  <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
2496                         clock-names = "cfg_noc", "core", "iface", "mock_utmi",
2497                                       "sleep";
2498
2499                         assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
2500                                           <&gcc GCC_USB30_PRIM_MASTER_CLK>;
2501                         assigned-clock-rates = <19200000>, <150000000>;
2502
2503                         interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
2504                                      <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
2505                                      <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
2506                                      <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
2507                         interrupt-names = "hs_phy_irq", "ss_phy_irq",
2508                                           "dm_hs_phy_irq", "dp_hs_phy_irq";
2509
2510                         power-domains = <&gcc USB30_PRIM_GDSC>;
2511
2512                         resets = <&gcc GCC_USB30_PRIM_BCR>;
2513
2514                         usb_1_dwc3: dwc3@a600000 {
2515                                 compatible = "snps,dwc3";
2516                                 reg = <0 0x0a600000 0 0xcd00>;
2517                                 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
2518                                 iommus = <&apps_smmu 0x740 0>;
2519                                 snps,dis_u2_susphy_quirk;
2520                                 snps,dis_enblslpm_quirk;
2521                                 phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
2522                                 phy-names = "usb2-phy", "usb3-phy";
2523                         };
2524                 };
2525
2526                 usb_2: usb@a8f8800 {
2527                         compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
2528                         reg = <0 0x0a8f8800 0 0x400>;
2529                         status = "disabled";
2530                         #address-cells = <2>;
2531                         #size-cells = <2>;
2532                         ranges;
2533                         dma-ranges;
2534
2535                         clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
2536                                  <&gcc GCC_USB30_SEC_MASTER_CLK>,
2537                                  <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
2538                                  <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
2539                                  <&gcc GCC_USB30_SEC_SLEEP_CLK>;
2540                         clock-names = "cfg_noc", "core", "iface", "mock_utmi",
2541                                       "sleep";
2542
2543                         assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
2544                                           <&gcc GCC_USB30_SEC_MASTER_CLK>;
2545                         assigned-clock-rates = <19200000>, <150000000>;
2546
2547                         interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
2548                                      <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
2549                                      <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
2550                                      <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
2551                         interrupt-names = "hs_phy_irq", "ss_phy_irq",
2552                                           "dm_hs_phy_irq", "dp_hs_phy_irq";
2553
2554                         power-domains = <&gcc USB30_SEC_GDSC>;
2555
2556                         resets = <&gcc GCC_USB30_SEC_BCR>;
2557
2558                         usb_2_dwc3: dwc3@a800000 {
2559                                 compatible = "snps,dwc3";
2560                                 reg = <0 0x0a800000 0 0xcd00>;
2561                                 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
2562                                 iommus = <&apps_smmu 0x760 0>;
2563                                 snps,dis_u2_susphy_quirk;
2564                                 snps,dis_enblslpm_quirk;
2565                                 phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
2566                                 phy-names = "usb2-phy", "usb3-phy";
2567                         };
2568                 };
2569
2570                 video-codec@aa00000 {
2571                         compatible = "qcom,sdm845-venus";
2572                         reg = <0 0x0aa00000 0 0xff000>;
2573                         interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
2574                         power-domains = <&videocc VENUS_GDSC>;
2575                         clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
2576                                  <&videocc VIDEO_CC_VENUS_AHB_CLK>,
2577                                  <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>;
2578                         clock-names = "core", "iface", "bus";
2579                         iommus = <&apps_smmu 0x10a0 0x8>,
2580                                  <&apps_smmu 0x10b0 0x0>;
2581                         memory-region = <&venus_mem>;
2582
2583                         video-core0 {
2584                                 compatible = "venus-decoder";
2585                                 clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
2586                                          <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
2587                                 clock-names = "core", "bus";
2588                                 power-domains = <&videocc VCODEC0_GDSC>;
2589                         };
2590
2591                         video-core1 {
2592                                 compatible = "venus-encoder";
2593                                 clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
2594                                          <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
2595                                 clock-names = "core", "bus";
2596                                 power-domains = <&videocc VCODEC1_GDSC>;
2597                         };
2598                 };
2599
2600                 videocc: clock-controller@ab00000 {
2601                         compatible = "qcom,sdm845-videocc";
2602                         reg = <0 0x0ab00000 0 0x10000>;
2603                         #clock-cells = <1>;
2604                         #power-domain-cells = <1>;
2605                         #reset-cells = <1>;
2606                 };
2607
2608                 mdss: mdss@ae00000 {
2609                         compatible = "qcom,sdm845-mdss";
2610                         reg = <0 0x0ae00000 0 0x1000>;
2611                         reg-names = "mdss";
2612
2613                         power-domains = <&dispcc MDSS_GDSC>;
2614
2615                         clocks = <&gcc GCC_DISP_AHB_CLK>,
2616                                  <&gcc GCC_DISP_AXI_CLK>,
2617                                  <&dispcc DISP_CC_MDSS_MDP_CLK>;
2618                         clock-names = "iface", "bus", "core";
2619
2620                         assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
2621                         assigned-clock-rates = <300000000>;
2622
2623                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
2624                         interrupt-controller;
2625                         #interrupt-cells = <1>;
2626
2627                         iommus = <&apps_smmu 0x880 0x8>,
2628                                  <&apps_smmu 0xc80 0x8>;
2629
2630                         status = "disabled";
2631
2632                         #address-cells = <2>;
2633                         #size-cells = <2>;
2634                         ranges;
2635
2636                         mdss_mdp: mdp@ae01000 {
2637                                 compatible = "qcom,sdm845-dpu";
2638                                 reg = <0 0x0ae01000 0 0x8f000>,
2639                                       <0 0x0aeb0000 0 0x2008>;
2640                                 reg-names = "mdp", "vbif";
2641
2642                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2643                                          <&dispcc DISP_CC_MDSS_AXI_CLK>,
2644                                          <&dispcc DISP_CC_MDSS_MDP_CLK>,
2645                                          <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
2646                                 clock-names = "iface", "bus", "core", "vsync";
2647
2648                                 assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
2649                                                   <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
2650                                 assigned-clock-rates = <300000000>,
2651                                                        <19200000>;
2652
2653                                 interrupt-parent = <&mdss>;
2654                                 interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
2655
2656                                 status = "disabled";
2657
2658                                 ports {
2659                                         #address-cells = <1>;
2660                                         #size-cells = <0>;
2661
2662                                         port@0 {
2663                                                 reg = <0>;
2664                                                 dpu_intf1_out: endpoint {
2665                                                         remote-endpoint = <&dsi0_in>;
2666                                                 };
2667                                         };
2668
2669                                         port@1 {
2670                                                 reg = <1>;
2671                                                 dpu_intf2_out: endpoint {
2672                                                         remote-endpoint = <&dsi1_in>;
2673                                                 };
2674                                         };
2675                                 };
2676                         };
2677
2678                         dsi0: dsi@ae94000 {
2679                                 compatible = "qcom,mdss-dsi-ctrl";
2680                                 reg = <0 0x0ae94000 0 0x400>;
2681                                 reg-names = "dsi_ctrl";
2682
2683                                 interrupt-parent = <&mdss>;
2684                                 interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
2685
2686                                 clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
2687                                          <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
2688                                          <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
2689                                          <&dispcc DISP_CC_MDSS_ESC0_CLK>,
2690                                          <&dispcc DISP_CC_MDSS_AHB_CLK>,
2691                                          <&dispcc DISP_CC_MDSS_AXI_CLK>;
2692                                 clock-names = "byte",
2693                                               "byte_intf",
2694                                               "pixel",
2695                                               "core",
2696                                               "iface",
2697                                               "bus";
2698
2699                                 phys = <&dsi0_phy>;
2700                                 phy-names = "dsi";
2701
2702                                 status = "disabled";
2703
2704                                 ports {
2705                                         #address-cells = <1>;
2706                                         #size-cells = <0>;
2707
2708                                         port@0 {
2709                                                 reg = <0>;
2710                                                 dsi0_in: endpoint {
2711                                                         remote-endpoint = <&dpu_intf1_out>;
2712                                                 };
2713                                         };
2714
2715                                         port@1 {
2716                                                 reg = <1>;
2717                                                 dsi0_out: endpoint {
2718                                                 };
2719                                         };
2720                                 };
2721                         };
2722
2723                         dsi0_phy: dsi-phy@ae94400 {
2724                                 compatible = "qcom,dsi-phy-10nm";
2725                                 reg = <0 0x0ae94400 0 0x200>,
2726                                       <0 0x0ae94600 0 0x280>,
2727                                       <0 0x0ae94a00 0 0x1e0>;
2728                                 reg-names = "dsi_phy",
2729                                             "dsi_phy_lane",
2730                                             "dsi_pll";
2731
2732                                 #clock-cells = <1>;
2733                                 #phy-cells = <0>;
2734
2735                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2736                                          <&rpmhcc RPMH_CXO_CLK>;
2737                                 clock-names = "iface", "ref";
2738
2739                                 status = "disabled";
2740                         };
2741
2742                         dsi1: dsi@ae96000 {
2743                                 compatible = "qcom,mdss-dsi-ctrl";
2744                                 reg = <0 0x0ae96000 0 0x400>;
2745                                 reg-names = "dsi_ctrl";
2746
2747                                 interrupt-parent = <&mdss>;
2748                                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
2749
2750                                 clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
2751                                          <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
2752                                          <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
2753                                          <&dispcc DISP_CC_MDSS_ESC1_CLK>,
2754                                          <&dispcc DISP_CC_MDSS_AHB_CLK>,
2755                                          <&dispcc DISP_CC_MDSS_AXI_CLK>;
2756                                 clock-names = "byte",
2757                                               "byte_intf",
2758                                               "pixel",
2759                                               "core",
2760                                               "iface",
2761                                               "bus";
2762
2763                                 phys = <&dsi1_phy>;
2764                                 phy-names = "dsi";
2765
2766                                 status = "disabled";
2767
2768                                 ports {
2769                                         #address-cells = <1>;
2770                                         #size-cells = <0>;
2771
2772                                         port@0 {
2773                                                 reg = <0>;
2774                                                 dsi1_in: endpoint {
2775                                                         remote-endpoint = <&dpu_intf2_out>;
2776                                                 };
2777                                         };
2778
2779                                         port@1 {
2780                                                 reg = <1>;
2781                                                 dsi1_out: endpoint {
2782                                                 };
2783                                         };
2784                                 };
2785                         };
2786
2787                         dsi1_phy: dsi-phy@ae96400 {
2788                                 compatible = "qcom,dsi-phy-10nm";
2789                                 reg = <0 0x0ae96400 0 0x200>,
2790                                       <0 0x0ae96600 0 0x280>,
2791                                       <0 0x0ae96a00 0 0x10e>;
2792                                 reg-names = "dsi_phy",
2793                                             "dsi_phy_lane",
2794                                             "dsi_pll";
2795
2796                                 #clock-cells = <1>;
2797                                 #phy-cells = <0>;
2798
2799                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2800                                          <&rpmhcc RPMH_CXO_CLK>;
2801                                 clock-names = "iface", "ref";
2802
2803                                 status = "disabled";
2804                         };
2805                 };
2806
2807                 gpu@5000000 {
2808                         compatible = "qcom,adreno-630.2", "qcom,adreno";
2809                         #stream-id-cells = <16>;
2810
2811                         reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x10>;
2812                         reg-names = "kgsl_3d0_reg_memory", "cx_mem";
2813
2814                         /*
2815                          * Look ma, no clocks! The GPU clocks and power are
2816                          * controlled entirely by the GMU
2817                          */
2818
2819                         interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
2820
2821                         iommus = <&adreno_smmu 0>;
2822
2823                         operating-points-v2 = <&gpu_opp_table>;
2824
2825                         qcom,gmu = <&gmu>;
2826
2827                         zap-shader {
2828                                 memory-region = <&gpu_mem>;
2829                         };
2830
2831                         gpu_opp_table: opp-table {
2832                                 compatible = "operating-points-v2";
2833
2834                                 opp-710000000 {
2835                                         opp-hz = /bits/ 64 <710000000>;
2836                                         opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
2837                                 };
2838
2839                                 opp-675000000 {
2840                                         opp-hz = /bits/ 64 <675000000>;
2841                                         opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
2842                                 };
2843
2844                                 opp-596000000 {
2845                                         opp-hz = /bits/ 64 <596000000>;
2846                                         opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
2847                                 };
2848
2849                                 opp-520000000 {
2850                                         opp-hz = /bits/ 64 <520000000>;
2851                                         opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
2852                                 };
2853
2854                                 opp-414000000 {
2855                                         opp-hz = /bits/ 64 <414000000>;
2856                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
2857                                 };
2858
2859                                 opp-342000000 {
2860                                         opp-hz = /bits/ 64 <342000000>;
2861                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
2862                                 };
2863
2864                                 opp-257000000 {
2865                                         opp-hz = /bits/ 64 <257000000>;
2866                                         opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
2867                                 };
2868                         };
2869                 };
2870
2871                 adreno_smmu: iommu@5040000 {
2872                         compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2";
2873                         reg = <0 0x5040000 0 0x10000>;
2874                         #iommu-cells = <1>;
2875                         #global-interrupts = <2>;
2876                         interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
2877                                      <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
2878                                      <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
2879                                      <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
2880                                      <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
2881                                      <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
2882                                      <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
2883                                      <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
2884                                      <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
2885                                      <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
2886                         clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
2887                                  <&gcc GCC_GPU_CFG_AHB_CLK>;
2888                         clock-names = "bus", "iface";
2889
2890                         power-domains = <&gpucc GPU_CX_GDSC>;
2891                 };
2892
2893                 gmu: gmu@506a000 {
2894                         compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
2895
2896                         reg = <0 0x506a000 0 0x30000>,
2897                               <0 0xb280000 0 0x10000>,
2898                               <0 0xb480000 0 0x10000>;
2899                         reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
2900
2901                         interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
2902                                      <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
2903                         interrupt-names = "hfi", "gmu";
2904
2905                         clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
2906                                  <&gpucc GPU_CC_CXO_CLK>,
2907                                  <&gcc GCC_DDRSS_GPU_AXI_CLK>,
2908                                  <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
2909                         clock-names = "gmu", "cxo", "axi", "memnoc";
2910
2911                         power-domains = <&gpucc GPU_CX_GDSC>,
2912                                         <&gpucc GPU_GX_GDSC>;
2913                         power-domain-names = "cx", "gx";
2914
2915                         iommus = <&adreno_smmu 5>;
2916
2917                         operating-points-v2 = <&gmu_opp_table>;
2918
2919                         gmu_opp_table: opp-table {
2920                                 compatible = "operating-points-v2";
2921
2922                                 opp-400000000 {
2923                                         opp-hz = /bits/ 64 <400000000>;
2924                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
2925                                 };
2926
2927                                 opp-200000000 {
2928                                         opp-hz = /bits/ 64 <200000000>;
2929                                         opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
2930                                 };
2931                         };
2932                 };
2933
2934                 dispcc: clock-controller@af00000 {
2935                         compatible = "qcom,sdm845-dispcc";
2936                         reg = <0 0x0af00000 0 0x10000>;
2937                         #clock-cells = <1>;
2938                         #reset-cells = <1>;
2939                         #power-domain-cells = <1>;
2940                 };
2941
2942                 pdc_reset: reset-controller@b2e0000 {
2943                         compatible = "qcom,sdm845-pdc-global";
2944                         reg = <0 0x0b2e0000 0 0x20000>;
2945                         #reset-cells = <1>;
2946                 };
2947
2948                 tsens0: thermal-sensor@c263000 {
2949                         compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
2950                         reg = <0 0x0c263000 0 0x1ff>, /* TM */
2951                               <0 0x0c222000 0 0x1ff>; /* SROT */
2952                         #qcom,sensors = <13>;
2953                         #thermal-sensor-cells = <1>;
2954                 };
2955
2956                 tsens1: thermal-sensor@c265000 {
2957                         compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
2958                         reg = <0 0x0c265000 0 0x1ff>, /* TM */
2959                               <0 0x0c223000 0 0x1ff>; /* SROT */
2960                         #qcom,sensors = <8>;
2961                         #thermal-sensor-cells = <1>;
2962                 };
2963
2964                 aoss_reset: reset-controller@c2a0000 {
2965                         compatible = "qcom,sdm845-aoss-cc";
2966                         reg = <0 0x0c2a0000 0 0x31000>;
2967                         #reset-cells = <1>;
2968                 };
2969
2970                 aoss_qmp: qmp@c300000 {
2971                         compatible = "qcom,sdm845-aoss-qmp";
2972                         reg = <0 0x0c300000 0 0x100000>;
2973                         interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
2974                         mboxes = <&apss_shared 0>;
2975
2976                         #clock-cells = <0>;
2977                         #power-domain-cells = <1>;
2978
2979                         cx_cdev: cx {
2980                                 #cooling-cells = <2>;
2981                         };
2982
2983                         ebi_cdev: ebi {
2984                                 #cooling-cells = <2>;
2985                         };
2986                 };
2987
2988                 spmi_bus: spmi@c440000 {
2989                         compatible = "qcom,spmi-pmic-arb";
2990                         reg = <0 0x0c440000 0 0x1100>,
2991                               <0 0x0c600000 0 0x2000000>,
2992                               <0 0x0e600000 0 0x100000>,
2993                               <0 0x0e700000 0 0xa0000>,
2994                               <0 0x0c40a000 0 0x26000>;
2995                         reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
2996                         interrupt-names = "periph_irq";
2997                         interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
2998                         qcom,ee = <0>;
2999                         qcom,channel = <0>;
3000                         #address-cells = <2>;
3001                         #size-cells = <0>;
3002                         interrupt-controller;
3003                         #interrupt-cells = <4>;
3004                         cell-index = <0>;
3005                 };
3006
3007                 apps_smmu: iommu@15000000 {
3008                         compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
3009                         reg = <0 0x15000000 0 0x80000>;
3010                         #iommu-cells = <2>;
3011                         #global-interrupts = <1>;
3012                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
3013                                      <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
3014                                      <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
3015                                      <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
3016                                      <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
3017                                      <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
3018                                      <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
3019                                      <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
3020                                      <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
3021                                      <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
3022                                      <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
3023                                      <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
3024                                      <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
3025                                      <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
3026                                      <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
3027                                      <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
3028                                      <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
3029                                      <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
3030                                      <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
3031                                      <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
3032                                      <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
3033                                      <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
3034                                      <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
3035                                      <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
3036                                      <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
3037                                      <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
3038                                      <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
3039                                      <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
3040                                      <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
3041                                      <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
3042                                      <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
3043                                      <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
3044                                      <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
3045                                      <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
3046                                      <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
3047                                      <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
3048                                      <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
3049                                      <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
3050                                      <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
3051                                      <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
3052                                      <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
3053                                      <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
3054                                      <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
3055                                      <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
3056                                      <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
3057                                      <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
3058                                      <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
3059                                      <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
3060                                      <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
3061                                      <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
3062                                      <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
3063                                      <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
3064                                      <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
3065                                      <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
3066                                      <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
3067                                      <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
3068                                      <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
3069                                      <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
3070                                      <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
3071                                      <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
3072                                      <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
3073                                      <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
3074                                      <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
3075                                      <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
3076                                      <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
3077                 };
3078
3079                 lpasscc: clock-controller@17014000 {
3080                         compatible = "qcom,sdm845-lpasscc";
3081                         reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>;
3082                         reg-names = "cc", "qdsp6ss";
3083                         #clock-cells = <1>;
3084                         status = "disabled";
3085                 };
3086
3087                 apss_shared: mailbox@17990000 {
3088                         compatible = "qcom,sdm845-apss-shared";
3089                         reg = <0 0x17990000 0 0x1000>;
3090                         #mbox-cells = <1>;
3091                 };
3092
3093                 apps_rsc: rsc@179c0000 {
3094                         label = "apps_rsc";
3095                         compatible = "qcom,rpmh-rsc";
3096                         reg = <0 0x179c0000 0 0x10000>,
3097                               <0 0x179d0000 0 0x10000>,
3098                               <0 0x179e0000 0 0x10000>;
3099                         reg-names = "drv-0", "drv-1", "drv-2";
3100                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
3101                                      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
3102                                      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
3103                         qcom,tcs-offset = <0xd00>;
3104                         qcom,drv-id = <2>;
3105                         qcom,tcs-config = <ACTIVE_TCS  2>,
3106                                           <SLEEP_TCS   3>,
3107                                           <WAKE_TCS    3>,
3108                                           <CONTROL_TCS 1>;
3109
3110                         rpmhcc: clock-controller {
3111                                 compatible = "qcom,sdm845-rpmh-clk";
3112                                 #clock-cells = <1>;
3113                                 clock-names = "xo";
3114                                 clocks = <&xo_board>;
3115                         };
3116
3117                         rpmhpd: power-controller {
3118                                 compatible = "qcom,sdm845-rpmhpd";
3119                                 #power-domain-cells = <1>;
3120                                 operating-points-v2 = <&rpmhpd_opp_table>;
3121
3122                                 rpmhpd_opp_table: opp-table {
3123                                         compatible = "operating-points-v2";
3124
3125                                         rpmhpd_opp_ret: opp1 {
3126                                                 opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
3127                                         };
3128
3129                                         rpmhpd_opp_min_svs: opp2 {
3130                                                 opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
3131                                         };
3132
3133                                         rpmhpd_opp_low_svs: opp3 {
3134                                                 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
3135                                         };
3136
3137                                         rpmhpd_opp_svs: opp4 {
3138                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
3139                                         };
3140
3141                                         rpmhpd_opp_svs_l1: opp5 {
3142                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
3143                                         };
3144
3145                                         rpmhpd_opp_nom: opp6 {
3146                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
3147                                         };
3148
3149                                         rpmhpd_opp_nom_l1: opp7 {
3150                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
3151                                         };
3152
3153                                         rpmhpd_opp_nom_l2: opp8 {
3154                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
3155                                         };
3156
3157                                         rpmhpd_opp_turbo: opp9 {
3158                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
3159                                         };
3160
3161                                         rpmhpd_opp_turbo_l1: opp10 {
3162                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
3163                                         };
3164                                 };
3165                         };
3166
3167                         rsc_hlos: interconnect {
3168                                 compatible = "qcom,sdm845-rsc-hlos";
3169                                 #interconnect-cells = <1>;
3170                         };
3171                 };
3172
3173                 intc: interrupt-controller@17a00000 {
3174                         compatible = "arm,gic-v3";
3175                         #address-cells = <2>;
3176                         #size-cells = <2>;
3177                         ranges;
3178                         #interrupt-cells = <3>;
3179                         interrupt-controller;
3180                         reg = <0 0x17a00000 0 0x10000>,     /* GICD */
3181                               <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
3182                         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
3183
3184                         gic-its@17a40000 {
3185                                 compatible = "arm,gic-v3-its";
3186                                 msi-controller;
3187                                 #msi-cells = <1>;
3188                                 reg = <0 0x17a40000 0 0x20000>;
3189                                 status = "disabled";
3190                         };
3191                 };
3192
3193                 timer@17c90000 {
3194                         #address-cells = <2>;
3195                         #size-cells = <2>;
3196                         ranges;
3197                         compatible = "arm,armv7-timer-mem";
3198                         reg = <0 0x17c90000 0 0x1000>;
3199
3200                         frame@17ca0000 {
3201                                 frame-number = <0>;
3202                                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
3203                                              <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
3204                                 reg = <0 0x17ca0000 0 0x1000>,
3205                                       <0 0x17cb0000 0 0x1000>;
3206                         };
3207
3208                         frame@17cc0000 {
3209                                 frame-number = <1>;
3210                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
3211                                 reg = <0 0x17cc0000 0 0x1000>;
3212                                 status = "disabled";
3213                         };
3214
3215                         frame@17cd0000 {
3216                                 frame-number = <2>;
3217                                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
3218                                 reg = <0 0x17cd0000 0 0x1000>;
3219                                 status = "disabled";
3220                         };
3221
3222                         frame@17ce0000 {
3223                                 frame-number = <3>;
3224                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
3225                                 reg = <0 0x17ce0000 0 0x1000>;
3226                                 status = "disabled";
3227                         };
3228
3229                         frame@17cf0000 {
3230                                 frame-number = <4>;
3231                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
3232                                 reg = <0 0x17cf0000 0 0x1000>;
3233                                 status = "disabled";
3234                         };
3235
3236                         frame@17d00000 {
3237                                 frame-number = <5>;
3238                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
3239                                 reg = <0 0x17d00000 0 0x1000>;
3240                                 status = "disabled";
3241                         };
3242
3243                         frame@17d10000 {
3244                                 frame-number = <6>;
3245                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
3246                                 reg = <0 0x17d10000 0 0x1000>;
3247                                 status = "disabled";
3248                         };
3249                 };
3250
3251                 cpufreq_hw: cpufreq@17d43000 {
3252                         compatible = "qcom,cpufreq-hw";
3253                         reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
3254                         reg-names = "freq-domain0", "freq-domain1";
3255
3256                         clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
3257                         clock-names = "xo", "alternate";
3258
3259                         #freq-domain-cells = <1>;
3260                 };
3261
3262                 wifi: wifi@18800000 {
3263                         compatible = "qcom,wcn3990-wifi";
3264                         status = "disabled";
3265                         reg = <0 0x18800000 0 0x800000>;
3266                         reg-names = "membase";
3267                         memory-region = <&wlan_msa_mem>;
3268                         clock-names = "cxo_ref_clk_pin";
3269                         clocks = <&rpmhcc RPMH_RF_CLK2>;
3270                         interrupts =
3271                                 <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
3272                                 <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
3273                                 <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
3274                                 <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
3275                                 <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
3276                                 <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
3277                                 <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
3278                                 <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
3279                                 <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
3280                                 <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
3281                                 <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
3282                                 <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
3283                         iommus = <&apps_smmu 0x0040 0x1>;
3284                 };
3285         };
3286
3287         thermal-zones {
3288                 cpu0-thermal {
3289                         polling-delay-passive = <250>;
3290                         polling-delay = <1000>;
3291
3292                         thermal-sensors = <&tsens0 1>;
3293
3294                         trips {
3295                                 cpu0_alert0: trip-point0 {
3296                                         temperature = <90000>;
3297                                         hysteresis = <2000>;
3298                                         type = "passive";
3299                                 };
3300
3301                                 cpu0_alert1: trip-point1 {
3302                                         temperature = <95000>;
3303                                         hysteresis = <2000>;
3304                                         type = "passive";
3305                                 };
3306
3307                                 cpu0_crit: cpu_crit {
3308                                         temperature = <110000>;
3309                                         hysteresis = <1000>;
3310                                         type = "critical";
3311                                 };
3312                         };
3313
3314                         cooling-maps {
3315                                 map0 {
3316                                         trip = <&cpu0_alert0>;
3317                                         cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3318                                                          <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3319                                                          <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3320                                                          <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3321                                 };
3322                                 map1 {
3323                                         trip = <&cpu0_alert1>;
3324                                         cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3325                                                          <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3326                                                          <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3327                                                          <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3328                                 };
3329                         };
3330                 };
3331
3332                 cpu1-thermal {
3333                         polling-delay-passive = <250>;
3334                         polling-delay = <1000>;
3335
3336                         thermal-sensors = <&tsens0 2>;
3337
3338                         trips {
3339                                 cpu1_alert0: trip-point0 {
3340                                         temperature = <90000>;
3341                                         hysteresis = <2000>;
3342                                         type = "passive";
3343                                 };
3344
3345                                 cpu1_alert1: trip-point1 {
3346                                         temperature = <95000>;
3347                                         hysteresis = <2000>;
3348                                         type = "passive";
3349                                 };
3350
3351                                 cpu1_crit: cpu_crit {
3352                                         temperature = <110000>;
3353                                         hysteresis = <1000>;
3354                                         type = "critical";
3355                                 };
3356                         };
3357
3358                         cooling-maps {
3359                                 map0 {
3360                                         trip = <&cpu1_alert0>;
3361                                         cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3362                                                          <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3363                                                          <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3364                                                          <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3365                                 };
3366                                 map1 {
3367                                         trip = <&cpu1_alert1>;
3368                                         cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3369                                                          <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3370                                                          <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3371                                                          <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3372                                 };
3373                         };
3374                 };
3375
3376                 cpu2-thermal {
3377                         polling-delay-passive = <250>;
3378                         polling-delay = <1000>;
3379
3380                         thermal-sensors = <&tsens0 3>;
3381
3382                         trips {
3383                                 cpu2_alert0: trip-point0 {
3384                                         temperature = <90000>;
3385                                         hysteresis = <2000>;
3386                                         type = "passive";
3387                                 };
3388
3389                                 cpu2_alert1: trip-point1 {
3390                                         temperature = <95000>;
3391                                         hysteresis = <2000>;
3392                                         type = "passive";
3393                                 };
3394
3395                                 cpu2_crit: cpu_crit {
3396                                         temperature = <110000>;
3397                                         hysteresis = <1000>;
3398                                         type = "critical";
3399                                 };
3400                         };
3401
3402                         cooling-maps {
3403                                 map0 {
3404                                         trip = <&cpu2_alert0>;
3405                                         cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3406                                                          <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3407                                                          <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3408                                                          <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3409                                 };
3410                                 map1 {
3411                                         trip = <&cpu2_alert1>;
3412                                         cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3413                                                          <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3414                                                          <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3415                                                          <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3416                                 };
3417                         };
3418                 };
3419
3420                 cpu3-thermal {
3421                         polling-delay-passive = <250>;
3422                         polling-delay = <1000>;
3423
3424                         thermal-sensors = <&tsens0 4>;
3425
3426                         trips {
3427                                 cpu3_alert0: trip-point0 {
3428                                         temperature = <90000>;
3429                                         hysteresis = <2000>;
3430                                         type = "passive";
3431                                 };
3432
3433                                 cpu3_alert1: trip-point1 {
3434                                         temperature = <95000>;
3435                                         hysteresis = <2000>;
3436                                         type = "passive";
3437                                 };
3438
3439                                 cpu3_crit: cpu_crit {
3440                                         temperature = <110000>;
3441                                         hysteresis = <1000>;
3442                                         type = "critical";
3443                                 };
3444                         };
3445
3446                         cooling-maps {
3447                                 map0 {
3448                                         trip = <&cpu3_alert0>;
3449                                         cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3450                                                          <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3451                                                          <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3452                                                          <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3453                                 };
3454                                 map1 {
3455                                         trip = <&cpu3_alert1>;
3456                                         cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3457                                                          <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3458                                                          <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3459                                                          <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3460                                 };
3461                         };
3462                 };
3463
3464                 cpu4-thermal {
3465                         polling-delay-passive = <250>;
3466                         polling-delay = <1000>;
3467
3468                         thermal-sensors = <&tsens0 7>;
3469
3470                         trips {
3471                                 cpu4_alert0: trip-point0 {
3472                                         temperature = <90000>;
3473                                         hysteresis = <2000>;
3474                                         type = "passive";
3475                                 };
3476
3477                                 cpu4_alert1: trip-point1 {
3478                                         temperature = <95000>;
3479                                         hysteresis = <2000>;
3480                                         type = "passive";
3481                                 };
3482
3483                                 cpu4_crit: cpu_crit {
3484                                         temperature = <110000>;
3485                                         hysteresis = <1000>;
3486                                         type = "critical";
3487                                 };
3488                         };
3489
3490                         cooling-maps {
3491                                 map0 {
3492                                         trip = <&cpu4_alert0>;
3493                                         cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3494                                                          <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3495                                                          <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3496                                                          <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3497                                 };
3498                                 map1 {
3499                                         trip = <&cpu4_alert1>;
3500                                         cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3501                                                          <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3502                                                          <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3503                                                          <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3504                                 };
3505                         };
3506                 };
3507
3508                 cpu5-thermal {
3509                         polling-delay-passive = <250>;
3510                         polling-delay = <1000>;
3511
3512                         thermal-sensors = <&tsens0 8>;
3513
3514                         trips {
3515                                 cpu5_alert0: trip-point0 {
3516                                         temperature = <90000>;
3517                                         hysteresis = <2000>;
3518                                         type = "passive";
3519                                 };
3520
3521                                 cpu5_alert1: trip-point1 {
3522                                         temperature = <95000>;
3523                                         hysteresis = <2000>;
3524                                         type = "passive";
3525                                 };
3526
3527                                 cpu5_crit: cpu_crit {
3528                                         temperature = <110000>;
3529                                         hysteresis = <1000>;
3530                                         type = "critical";
3531                                 };
3532                         };
3533
3534                         cooling-maps {
3535                                 map0 {
3536                                         trip = <&cpu5_alert0>;
3537                                         cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3538                                                          <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3539                                                          <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3540                                                          <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3541                                 };
3542                                 map1 {
3543                                         trip = <&cpu5_alert1>;
3544                                         cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3545                                                          <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3546                                                          <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3547                                                          <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3548                                 };
3549                         };
3550                 };
3551
3552                 cpu6-thermal {
3553                         polling-delay-passive = <250>;
3554                         polling-delay = <1000>;
3555
3556                         thermal-sensors = <&tsens0 9>;
3557
3558                         trips {
3559                                 cpu6_alert0: trip-point0 {
3560                                         temperature = <90000>;
3561                                         hysteresis = <2000>;
3562                                         type = "passive";
3563                                 };
3564
3565                                 cpu6_alert1: trip-point1 {
3566                                         temperature = <95000>;
3567                                         hysteresis = <2000>;
3568                                         type = "passive";
3569                                 };
3570
3571                                 cpu6_crit: cpu_crit {
3572                                         temperature = <110000>;
3573                                         hysteresis = <1000>;
3574                                         type = "critical";
3575                                 };
3576                         };
3577
3578                         cooling-maps {
3579                                 map0 {
3580                                         trip = <&cpu6_alert0>;
3581                                         cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3582                                                          <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3583                                                          <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3584                                                          <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3585                                 };
3586                                 map1 {
3587                                         trip = <&cpu6_alert1>;
3588                                         cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3589                                                          <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3590                                                          <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3591                                                          <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3592                                 };
3593                         };
3594                 };
3595
3596                 cpu7-thermal {
3597                         polling-delay-passive = <250>;
3598                         polling-delay = <1000>;
3599
3600                         thermal-sensors = <&tsens0 10>;
3601
3602                         trips {
3603                                 cpu7_alert0: trip-point0 {
3604                                         temperature = <90000>;
3605                                         hysteresis = <2000>;
3606                                         type = "passive";
3607                                 };
3608
3609                                 cpu7_alert1: trip-point1 {
3610                                         temperature = <95000>;
3611                                         hysteresis = <2000>;
3612                                         type = "passive";
3613                                 };
3614
3615                                 cpu7_crit: cpu_crit {
3616                                         temperature = <110000>;
3617                                         hysteresis = <1000>;
3618                                         type = "critical";
3619                                 };
3620                         };
3621
3622                         cooling-maps {
3623                                 map0 {
3624                                         trip = <&cpu7_alert0>;
3625                                         cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3626                                                          <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3627                                                          <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3628                                                          <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3629                                 };
3630                                 map1 {
3631                                         trip = <&cpu7_alert1>;
3632                                         cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3633                                                          <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3634                                                          <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3635                                                          <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3636                                 };
3637                         };
3638                 };
3639
3640                 aoss0-thermal {
3641                         polling-delay-passive = <250>;
3642                         polling-delay = <1000>;
3643
3644                         thermal-sensors = <&tsens0 0>;
3645
3646                         trips {
3647                                 aoss0_alert0: trip-point0 {
3648                                         temperature = <90000>;
3649                                         hysteresis = <2000>;
3650                                         type = "hot";
3651                                 };
3652                         };
3653                 };
3654
3655                 cluster0-thermal {
3656                         polling-delay-passive = <250>;
3657                         polling-delay = <1000>;
3658
3659                         thermal-sensors = <&tsens0 5>;
3660
3661                         trips {
3662                                 cluster0_alert0: trip-point0 {
3663                                         temperature = <90000>;
3664                                         hysteresis = <2000>;
3665                                         type = "hot";
3666                                 };
3667                                 cluster0_crit: cluster0_crit {
3668                                         temperature = <110000>;
3669                                         hysteresis = <2000>;
3670                                         type = "critical";
3671                                 };
3672                         };
3673                 };
3674
3675                 cluster1-thermal {
3676                         polling-delay-passive = <250>;
3677                         polling-delay = <1000>;
3678
3679                         thermal-sensors = <&tsens0 6>;
3680
3681                         trips {
3682                                 cluster1_alert0: trip-point0 {
3683                                         temperature = <90000>;
3684                                         hysteresis = <2000>;
3685                                         type = "hot";
3686                                 };
3687                                 cluster1_crit: cluster1_crit {
3688                                         temperature = <110000>;
3689                                         hysteresis = <2000>;
3690                                         type = "critical";
3691                                 };
3692                         };
3693                 };
3694
3695                 gpu-thermal-top {
3696                         polling-delay-passive = <250>;
3697                         polling-delay = <1000>;
3698
3699                         thermal-sensors = <&tsens0 11>;
3700
3701                         trips {
3702                                 gpu1_alert0: trip-point0 {
3703                                         temperature = <90000>;
3704                                         hysteresis = <2000>;
3705                                         type = "hot";
3706                                 };
3707                         };
3708                 };
3709
3710                 gpu-thermal-bottom {
3711                         polling-delay-passive = <250>;
3712                         polling-delay = <1000>;
3713
3714                         thermal-sensors = <&tsens0 12>;
3715
3716                         trips {
3717                                 gpu2_alert0: trip-point0 {
3718                                         temperature = <90000>;
3719                                         hysteresis = <2000>;
3720                                         type = "hot";
3721                                 };
3722                         };
3723                 };
3724
3725                 aoss1-thermal {
3726                         polling-delay-passive = <250>;
3727                         polling-delay = <1000>;
3728
3729                         thermal-sensors = <&tsens1 0>;
3730
3731                         trips {
3732                                 aoss1_alert0: trip-point0 {
3733                                         temperature = <90000>;
3734                                         hysteresis = <2000>;
3735                                         type = "hot";
3736                                 };
3737                         };
3738                 };
3739
3740                 q6-modem-thermal {
3741                         polling-delay-passive = <250>;
3742                         polling-delay = <1000>;
3743
3744                         thermal-sensors = <&tsens1 1>;
3745
3746                         trips {
3747                                 q6_modem_alert0: trip-point0 {
3748                                         temperature = <90000>;
3749                                         hysteresis = <2000>;
3750                                         type = "hot";
3751                                 };
3752                         };
3753                 };
3754
3755                 mem-thermal {
3756                         polling-delay-passive = <250>;
3757                         polling-delay = <1000>;
3758
3759                         thermal-sensors = <&tsens1 2>;
3760
3761                         trips {
3762                                 mem_alert0: trip-point0 {
3763                                         temperature = <90000>;
3764                                         hysteresis = <2000>;
3765                                         type = "hot";
3766                                 };
3767                         };
3768                 };
3769
3770                 wlan-thermal {
3771                         polling-delay-passive = <250>;
3772                         polling-delay = <1000>;
3773
3774                         thermal-sensors = <&tsens1 3>;
3775
3776                         trips {
3777                                 wlan_alert0: trip-point0 {
3778                                         temperature = <90000>;
3779                                         hysteresis = <2000>;
3780                                         type = "hot";
3781                                 };
3782                         };
3783                 };
3784
3785                 q6-hvx-thermal {
3786                         polling-delay-passive = <250>;
3787                         polling-delay = <1000>;
3788
3789                         thermal-sensors = <&tsens1 4>;
3790
3791                         trips {
3792                                 q6_hvx_alert0: trip-point0 {
3793                                         temperature = <90000>;
3794                                         hysteresis = <2000>;
3795                                         type = "hot";
3796                                 };
3797                         };
3798                 };
3799
3800                 camera-thermal {
3801                         polling-delay-passive = <250>;
3802                         polling-delay = <1000>;
3803
3804                         thermal-sensors = <&tsens1 5>;
3805
3806                         trips {
3807                                 camera_alert0: trip-point0 {
3808                                         temperature = <90000>;
3809                                         hysteresis = <2000>;
3810                                         type = "hot";
3811                                 };
3812                         };
3813                 };
3814
3815                 video-thermal {
3816                         polling-delay-passive = <250>;
3817                         polling-delay = <1000>;
3818
3819                         thermal-sensors = <&tsens1 6>;
3820
3821                         trips {
3822                                 video_alert0: trip-point0 {
3823                                         temperature = <90000>;
3824                                         hysteresis = <2000>;
3825                                         type = "hot";
3826                                 };
3827                         };
3828                 };
3829
3830                 modem-thermal {
3831                         polling-delay-passive = <250>;
3832                         polling-delay = <1000>;
3833
3834                         thermal-sensors = <&tsens1 7>;
3835
3836                         trips {
3837                                 modem_alert0: trip-point0 {
3838                                         temperature = <90000>;
3839                                         hysteresis = <2000>;
3840                                         type = "hot";
3841                                 };
3842                         };
3843                 };
3844         };
3845 };