arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi

   1 /*
   2  * DTS File for HiSilicon Hi3798cv200 SoC.
   3  *
   4  * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
   5  *
   6  * Released under the GPLv2 only.
   7  * SPDX-License-Identifier: GPL-2.0
   8  */
   9
  10 #include <dt-bindings/clock/histb-clock.h>
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include <dt-bindings/interrupt-controller/arm-gic.h>
  13 #include <dt-bindings/phy/phy.h>
  14 #include <dt-bindings/reset/ti-syscon.h>
  15
  16 / {
  17         compatible = "hisilicon,hi3798cv200";
  18         interrupt-parent = <&gic>;
  19         #address-cells = <2>;
  20         #size-cells = <2>;
  21
  22         psci {
  23                 compatible = "arm,psci-0.2";
  24                 method = "smc";
  25         };
  26
  27         cpus {
  28                 #address-cells = <2>;
  29                 #size-cells = <0>;
  30
  31                 cpu@0 {
  32                         compatible = "arm,cortex-a53";
  33                         device_type = "cpu";
  34                         reg = <0x0 0x0>;
  35                         enable-method = "psci";
  36                 };
  37
  38                 cpu@1 {
  39                         compatible = "arm,cortex-a53";
  40                         device_type = "cpu";
  41                         reg = <0x0 0x1>;
  42                         enable-method = "psci";
  43                 };
  44
  45                 cpu@2 {
  46                         compatible = "arm,cortex-a53";
  47                         device_type = "cpu";
  48                         reg = <0x0 0x2>;
  49                         enable-method = "psci";
  50                 };
  51
  52                 cpu@3 {
  53                         compatible = "arm,cortex-a53";
  54                         device_type = "cpu";
  55                         reg = <0x0 0x3>;
  56                         enable-method = "psci";
  57                 };
  58         };
  59
  60         gic: interrupt-controller@f1001000 {
  61                 compatible = "arm,gic-400";
  62                 reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */
  63                       <0x0 0xf1002000 0x0 0x100>;   /* GICC */
  64                 #address-cells = <0>;
  65                 #interrupt-cells = <3>;
  66                 interrupt-controller;
  67         };
  68
  69         timer {
  70                 compatible = "arm,armv8-timer";
  71                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
  72                               IRQ_TYPE_LEVEL_LOW)>,
  73                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
  74                               IRQ_TYPE_LEVEL_LOW)>,
  75                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
  76                               IRQ_TYPE_LEVEL_LOW)>,
  77                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
  78                               IRQ_TYPE_LEVEL_LOW)>;
  79         };
  80
  81         soc: soc@f0000000 {
  82                 compatible = "simple-bus";
  83                 #address-cells = <1>;
  84                 #size-cells = <1>;
  85                 ranges = <0x0 0x0 0xf0000000 0x10000000>;
  86
  87                 crg: clock-reset-controller@8a22000 {
  88                         compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd";
  89                         reg = <0x8a22000 0x1000>;
  90                         #clock-cells = <1>;
  91                         #reset-cells = <2>;
  92
  93                         gmacphyrst: reset-controller {
  94                                 compatible = "ti,syscon-reset";
  95                                 #reset-cells = <1>;
  96                                 ti,reset-bits =
  97                                         <0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR |
  98                                          DEASSERT_SET|STATUS_NONE)>,
  99                                         <0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR |
 100                                          DEASSERT_SET|STATUS_NONE)>;
 101                         };
 102                 };
 103
 104                 sysctrl: system-controller@8000000 {
 105                         compatible = "hisilicon,hi3798cv200-sysctrl", "syscon";
 106                         reg = <0x8000000 0x1000>;
 107                         #clock-cells = <1>;
 108                         #reset-cells = <2>;
 109                 };
 110
 111                 perictrl: peripheral-controller@8a20000 {
 112                         compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
 113                                      "simple-mfd";
 114                         reg = <0x8a20000 0x1000>;
 115                         #address-cells = <1>;
 116                         #size-cells = <1>;
 117                         ranges = <0x0 0x8a20000 0x1000>;
 118
 119                         usb2_phy1: usb2-phy@120 {
 120                                 compatible = "hisilicon,hi3798cv200-usb2-phy";
 121                                 reg = <0x120 0x4>;
 122                                 clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
 123                                 resets = <&crg 0xbc 4>;
 124                                 #address-cells = <1>;
 125                                 #size-cells = <0>;
 126
 127                                 usb2_phy1_port0: phy@0 {
 128                                         reg = <0>;
 129                                         #phy-cells = <0>;
 130                                         resets = <&crg 0xbc 8>;
 131                                 };
 132
 133                                 usb2_phy1_port1: phy@1 {
 134                                         reg = <1>;
 135                                         #phy-cells = <0>;
 136                                         resets = <&crg 0xbc 9>;
 137                                 };
 138                         };
 139
 140                         usb2_phy2: usb2-phy@124 {
 141                                 compatible = "hisilicon,hi3798cv200-usb2-phy";
 142                                 reg = <0x124 0x4>;
 143                                 clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
 144                                 resets = <&crg 0xbc 6>;
 145                                 #address-cells = <1>;
 146                                 #size-cells = <0>;
 147
 148                                 usb2_phy2_port0: phy@0 {
 149                                         reg = <0>;
 150                                         #phy-cells = <0>;
 151                                         resets = <&crg 0xbc 10>;
 152                                 };
 153                         };
 154
 155                         combphy0: phy@850 {
 156                                 compatible = "hisilicon,hi3798cv200-combphy";
 157                                 reg = <0x850 0x8>;
 158                                 #phy-cells = <1>;
 159                                 clocks = <&crg HISTB_COMBPHY0_CLK>;
 160                                 resets = <&crg 0x188 4>;
 161                                 assigned-clocks = <&crg HISTB_COMBPHY0_CLK>;
 162                                 assigned-clock-rates = <100000000>;
 163                                 hisilicon,fixed-mode = <PHY_TYPE_USB3>;
 164                         };
 165
 166                         combphy1: phy@858 {
 167                                 compatible = "hisilicon,hi3798cv200-combphy";
 168                                 reg = <0x858 0x8>;
 169                                 #phy-cells = <1>;
 170                                 clocks = <&crg HISTB_COMBPHY1_CLK>;
 171                                 resets = <&crg 0x188 12>;
 172                                 assigned-clocks = <&crg HISTB_COMBPHY1_CLK>;
 173                                 assigned-clock-rates = <100000000>;
 174                                 hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>;
 175                         };
 176                 };
 177
 178                 pmx0: pinconf@8a21000 {
 179                         compatible = "pinconf-single";
 180                         reg = <0x8a21000 0x180>;
 181                         pinctrl-single,register-width = <32>;
 182                         pinctrl-single,function-mask = <7>;
 183                         pinctrl-single,gpio-range = <
 184                                 &range 0  8 2  /* GPIO 0 */
 185                                 &range 8  1 0  /* GPIO 1 */
 186                                 &range 9  4 2
 187                                 &range 13 1 0
 188                                 &range 14 1 1
 189                                 &range 15 1 0
 190                                 &range 16 5 0  /* GPIO 2 */
 191                                 &range 21 3 1
 192                                 &range 24 4 1  /* GPIO 3 */
 193                                 &range 28 2 2
 194                                 &range 86 1 1
 195                                 &range 87 1 0
 196                                 &range 30 4 2  /* GPIO 4 */
 197                                 &range 34 3 0
 198                                 &range 37 1 2
 199                                 &range 38 3 2  /* GPIO 6 */
 200                                 &range 41 5 0
 201                                 &range 46 8 1  /* GPIO 7 */
 202                                 &range 54 8 1  /* GPIO 8 */
 203                                 &range 64 7 1  /* GPIO 9 */
 204                                 &range 71 1 0
 205                                 &range 72 6 1  /* GPIO 10 */
 206                                 &range 78 1 0
 207                                 &range 79 1 1
 208                                 &range 80 6 1  /* GPIO 11 */
 209                                 &range 70 2 1
 210                                 &range 88 8 0  /* GPIO 12 */
 211                         >;
 212
 213                         range: gpio-range {
 214                                 #pinctrl-single,gpio-range-cells = <3>;
 215                         };
 216                 };
 217
 218                 uart0: serial@8b00000 {
 219                         compatible = "arm,pl011", "arm,primecell";
 220                         reg = <0x8b00000 0x1000>;
 221                         interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 222                         clocks = <&sysctrl HISTB_UART0_CLK>;
 223                         clock-names = "apb_pclk";
 224                         status = "disabled";
 225                 };
 226
 227                 uart2: serial@8b02000 {
 228                         compatible = "arm,pl011", "arm,primecell";
 229                         reg = <0x8b02000 0x1000>;
 230                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 231                         clocks = <&crg HISTB_UART2_CLK>;
 232                         clock-names = "apb_pclk";
 233                         status = "disabled";
 234                 };
 235
 236                 i2c0: i2c@8b10000 {
 237                         compatible = "hisilicon,hix5hd2-i2c";
 238                         reg = <0x8b10000 0x1000>;
 239                         #address-cells = <1>;
 240                         #size-cells = <0>;
 241                         interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 242                         clock-frequency = <400000>;
 243                         clocks = <&crg HISTB_I2C0_CLK>;
 244                         status = "disabled";
 245                 };
 246
 247                 i2c1: i2c@8b11000 {
 248                         compatible = "hisilicon,hix5hd2-i2c";
 249                         reg = <0x8b11000 0x1000>;
 250                         #address-cells = <1>;
 251                         #size-cells = <0>;
 252                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 253                         clock-frequency = <400000>;
 254                         clocks = <&crg HISTB_I2C1_CLK>;
 255                         status = "disabled";
 256                 };
 257
 258                 i2c2: i2c@8b12000 {
 259                         compatible = "hisilicon,hix5hd2-i2c";
 260                         reg = <0x8b12000 0x1000>;
 261                         #address-cells = <1>;
 262                         #size-cells = <0>;
 263                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 264                         clock-frequency = <400000>;
 265                         clocks = <&crg HISTB_I2C2_CLK>;
 266                         status = "disabled";
 267                 };
 268
 269                 i2c3: i2c@8b13000 {
 270                         compatible = "hisilicon,hix5hd2-i2c";
 271                         reg = <0x8b13000 0x1000>;
 272                         #address-cells = <1>;
 273                         #size-cells = <0>;
 274                         interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 275                         clock-frequency = <400000>;
 276                         clocks = <&crg HISTB_I2C3_CLK>;
 277                         status = "disabled";
 278                 };
 279
 280                 i2c4: i2c@8b14000 {
 281                         compatible = "hisilicon,hix5hd2-i2c";
 282                         reg = <0x8b14000 0x1000>;
 283                         #address-cells = <1>;
 284                         #size-cells = <0>;
 285                         interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 286                         clock-frequency = <400000>;
 287                         clocks = <&crg HISTB_I2C4_CLK>;
 288                         status = "disabled";
 289                 };
 290
 291                 spi0: spi@8b1a000 {
 292                         compatible = "arm,pl022", "arm,primecell";
 293                         reg = <0x8b1a000 0x1000>;
 294                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 295                         num-cs = <1>;
 296                         cs-gpios = <&gpio7 1 0>;
 297                         clocks = <&crg HISTB_SPI0_CLK>;
 298                         clock-names = "apb_pclk";
 299                         #address-cells = <1>;
 300                         #size-cells = <0>;
 301                         status = "disabled";
 302                 };
 303
 304                 sd0: mmc@9820000 {
 305                         compatible = "snps,dw-mshc";
 306                         reg = <0x9820000 0x10000>;
 307                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 308                         clocks = <&crg HISTB_SDIO0_CIU_CLK>,
 309                                  <&crg HISTB_SDIO0_BIU_CLK>;
 310                         clock-names = "ciu", "biu";
 311                         resets = <&crg 0x9c 4>;
 312                         reset-names = "reset";
 313                         status = "disabled";
 314                 };
 315
 316                 emmc: mmc@9830000 {
 317                         compatible = "hisilicon,hi3798cv200-dw-mshc";
 318                         reg = <0x9830000 0x10000>;
 319                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 320                         clocks = <&crg HISTB_MMC_CIU_CLK>,
 321                                  <&crg HISTB_MMC_BIU_CLK>,
 322                                  <&crg HISTB_MMC_SAMPLE_CLK>,
 323                                  <&crg HISTB_MMC_DRV_CLK>;
 324                         clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
 325                         resets = <&crg 0xa0 4>;
 326                         reset-names = "reset";
 327                         status = "disabled";
 328                 };
 329
 330                 gpio0: gpio@8b20000 {
 331                         compatible = "arm,pl061", "arm,primecell";
 332                         reg = <0x8b20000 0x1000>;
 333                         interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 334                         gpio-controller;
 335                         #gpio-cells = <2>;
 336                         interrupt-controller;
 337                         #interrupt-cells = <2>;
 338                         gpio-ranges = <&pmx0 0 0 8>;
 339                         clocks = <&crg HISTB_APB_CLK>;
 340                         clock-names = "apb_pclk";
 341                         status = "disabled";
 342                 };
 343
 344                 gpio1: gpio@8b21000 {
 345                         compatible = "arm,pl061", "arm,primecell";
 346                         reg = <0x8b21000 0x1000>;
 347                         interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 348                         gpio-controller;
 349                         #gpio-cells = <2>;
 350                         interrupt-controller;
 351                         #interrupt-cells = <2>;
 352                         gpio-ranges = <
 353                                 &pmx0 0 8 1
 354                                 &pmx0 1 9 4
 355                                 &pmx0 5 13 1
 356                                 &pmx0 6 14 1
 357                                 &pmx0 7 15 1
 358                         >;
 359                         clocks = <&crg HISTB_APB_CLK>;
 360                         clock-names = "apb_pclk";
 361                         status = "disabled";
 362                 };
 363
 364                 gpio2: gpio@8b22000 {
 365                         compatible = "arm,pl061", "arm,primecell";
 366                         reg = <0x8b22000 0x1000>;
 367                         interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 368                         gpio-controller;
 369                         #gpio-cells = <2>;
 370                         interrupt-controller;
 371                         #interrupt-cells = <2>;
 372                         gpio-ranges = <&pmx0 0 16 5 &pmx0 5 21 3>;
 373                         clocks = <&crg HISTB_APB_CLK>;
 374                         clock-names = "apb_pclk";
 375                         status = "disabled";
 376                 };
 377
 378                 gpio3: gpio@8b23000 {
 379                         compatible = "arm,pl061", "arm,primecell";
 380                         reg = <0x8b23000 0x1000>;
 381                         interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 382                         gpio-controller;
 383                         #gpio-cells = <2>;
 384                         interrupt-controller;
 385                         #interrupt-cells = <2>;
 386                         gpio-ranges = <
 387                                 &pmx0 0 24 4
 388                                 &pmx0 4 28 2
 389                                 &pmx0 6 86 1
 390                                 &pmx0 7 87 1
 391                         >;
 392                         clocks = <&crg HISTB_APB_CLK>;
 393                         clock-names = "apb_pclk";
 394                         status = "disabled";
 395                 };
 396
 397                 gpio4: gpio@8b24000 {
 398                         compatible = "arm,pl061", "arm,primecell";
 399                         reg = <0x8b24000 0x1000>;
 400                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 401                         gpio-controller;
 402                         #gpio-cells = <2>;
 403                         interrupt-controller;
 404                         #interrupt-cells = <2>;
 405                         gpio-ranges = <&pmx0 0 30 4 &pmx0 4 34 3 &pmx0 7 37 1>;
 406                         clocks = <&crg HISTB_APB_CLK>;
 407                         clock-names = "apb_pclk";
 408                         status = "disabled";
 409                 };
 410
 411                 gpio5: gpio@8004000 {
 412                         compatible = "arm,pl061", "arm,primecell";
 413                         reg = <0x8004000 0x1000>;
 414                         interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 415                         gpio-controller;
 416                         #gpio-cells = <2>;
 417                         interrupt-controller;
 418                         #interrupt-cells = <2>;
 419                         clocks = <&crg HISTB_APB_CLK>;
 420                         clock-names = "apb_pclk";
 421                         status = "disabled";
 422                 };
 423
 424                 gpio6: gpio@8b26000 {
 425                         compatible = "arm,pl061", "arm,primecell";
 426                         reg = <0x8b26000 0x1000>;
 427                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 428                         gpio-controller;
 429                         #gpio-cells = <2>;
 430                         interrupt-controller;
 431                         #interrupt-cells = <2>;
 432                         gpio-ranges = <&pmx0 0 38 3 &pmx0 0 41 5>;
 433                         clocks = <&crg HISTB_APB_CLK>;
 434                         clock-names = "apb_pclk";
 435                         status = "disabled";
 436                 };
 437
 438                 gpio7: gpio@8b27000 {
 439                         compatible = "arm,pl061", "arm,primecell";
 440                         reg = <0x8b27000 0x1000>;
 441                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 442                         gpio-controller;
 443                         #gpio-cells = <2>;
 444                         interrupt-controller;
 445                         #interrupt-cells = <2>;
 446                         gpio-ranges = <&pmx0 0 46 8>;
 447                         clocks = <&crg HISTB_APB_CLK>;
 448                         clock-names = "apb_pclk";
 449                         status = "disabled";
 450                 };
 451
 452                 gpio8: gpio@8b28000 {
 453                         compatible = "arm,pl061", "arm,primecell";
 454                         reg = <0x8b28000 0x1000>;
 455                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 456                         gpio-controller;
 457                         #gpio-cells = <2>;
 458                         interrupt-controller;
 459                         #interrupt-cells = <2>;
 460                         gpio-ranges = <&pmx0 0 54 8>;
 461                         clocks = <&crg HISTB_APB_CLK>;
 462                         clock-names = "apb_pclk";
 463                         status = "disabled";
 464                 };
 465
 466                 gpio9: gpio@8b29000 {
 467                         compatible = "arm,pl061", "arm,primecell";
 468                         reg = <0x8b29000 0x1000>;
 469                         interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 470                         gpio-controller;
 471                         #gpio-cells = <2>;
 472                         interrupt-controller;
 473                         #interrupt-cells = <2>;
 474                         gpio-ranges = <&pmx0 0 64 7 &pmx0 71 1>;
 475                         clocks = <&crg HISTB_APB_CLK>;
 476                         clock-names = "apb_pclk";
 477                         status = "disabled";
 478                 };
 479
 480                 gpio10: gpio@8b2a000 {
 481                         compatible = "arm,pl061", "arm,primecell";
 482                         reg = <0x8b2a000 0x1000>;
 483                         interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 484                         gpio-controller;
 485                         #gpio-cells = <2>;
 486                         interrupt-controller;
 487                         #interrupt-cells = <2>;
 488                         gpio-ranges = <&pmx0 0 72 6 &pmx0 6 78 1 &pmx0 7 79 1>;
 489                         clocks = <&crg HISTB_APB_CLK>;
 490                         clock-names = "apb_pclk";
 491                         status = "disabled";
 492                 };
 493
 494                 gpio11: gpio@8b2b000 {
 495                         compatible = "arm,pl061", "arm,primecell";
 496                         reg = <0x8b2b000 0x1000>;
 497                         interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 498                         gpio-controller;
 499                         #gpio-cells = <2>;
 500                         interrupt-controller;
 501                         #interrupt-cells = <2>;
 502                         gpio-ranges = <&pmx0 0 80 6 &pmx0 6 70 2>;
 503                         clocks = <&crg HISTB_APB_CLK>;
 504                         clock-names = "apb_pclk";
 505                         status = "disabled";
 506                 };
 507
 508                 gpio12: gpio@8b2c000 {
 509                         compatible = "arm,pl061", "arm,primecell";
 510                         reg = <0x8b2c000 0x1000>;
 511                         interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 512                         gpio-controller;
 513                         #gpio-cells = <2>;
 514                         interrupt-controller;
 515                         #interrupt-cells = <2>;
 516                         gpio-ranges = <&pmx0 0 88 8>;
 517                         clocks = <&crg HISTB_APB_CLK>;
 518                         clock-names = "apb_pclk";
 519                         status = "disabled";
 520                 };
 521
 522                 gmac0: ethernet@9840000 {
 523                         compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
 524                         reg = <0x9840000 0x1000>,
 525                               <0x984300c 0x4>;
 526                         interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 527                         clocks = <&crg HISTB_ETH0_MAC_CLK>,
 528                                  <&crg HISTB_ETH0_MACIF_CLK>;
 529                         clock-names = "mac_core", "mac_ifc";
 530                         resets = <&crg 0xcc 8>,
 531                                  <&crg 0xcc 10>,
 532                                  <&gmacphyrst 0>;
 533                         reset-names = "mac_core", "mac_ifc", "phy";
 534                         status = "disabled";
 535                 };
 536
 537                 gmac1: ethernet@9841000 {
 538                         compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
 539                         reg = <0x9841000 0x1000>,
 540                               <0x9843010 0x4>;
 541                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 542                         clocks = <&crg HISTB_ETH1_MAC_CLK>,
 543                                  <&crg HISTB_ETH1_MACIF_CLK>;
 544                         clock-names = "mac_core", "mac_ifc";
 545                         resets = <&crg 0xcc 9>,
 546                                  <&crg 0xcc 11>,
 547                                  <&gmacphyrst 1>;
 548                         reset-names = "mac_core", "mac_ifc", "phy";
 549                         status = "disabled";
 550                 };
 551
 552                 ir: ir@8001000 {
 553                         compatible = "hisilicon,hix5hd2-ir";
 554                         reg = <0x8001000 0x1000>;
 555                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 556                         clocks = <&sysctrl HISTB_IR_CLK>;
 557                         status = "disabled";
 558                 };
 559
 560                 pcie: pcie@9860000 {
 561                         compatible = "hisilicon,hi3798cv200-pcie";
 562                         reg = <0x9860000 0x1000>,
 563                               <0x0 0x2000>,
 564                               <0x2000000 0x01000000>;
 565                         reg-names = "control", "rc-dbi", "config";
 566                         #address-cells = <3>;
 567                         #size-cells = <2>;
 568                         device_type = "pci";
 569                         bus-range = <0 15>;
 570                         num-lanes = <1>;
 571                         ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000
 572                                   0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
 573                         interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 574                         interrupt-names = "msi";
 575                         #interrupt-cells = <1>;
 576                         interrupt-map-mask = <0 0 0 0>;
 577                         interrupt-map = <0 0 0 0 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
 578                         clocks = <&crg HISTB_PCIE_AUX_CLK>,
 579                                  <&crg HISTB_PCIE_PIPE_CLK>,
 580                                  <&crg HISTB_PCIE_SYS_CLK>,
 581                                  <&crg HISTB_PCIE_BUS_CLK>;
 582                         clock-names = "aux", "pipe", "sys", "bus";
 583                         resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
 584                         reset-names = "soft", "sys", "bus";
 585                         phys = <&combphy1 PHY_TYPE_PCIE>;
 586                         phy-names = "phy";
 587                         status = "disabled";
 588                 };
 589
 590                 ohci: ohci@9880000 {
 591                         compatible = "generic-ohci";
 592                         reg = <0x9880000 0x10000>;
 593                         interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 594                         clocks = <&crg HISTB_USB2_BUS_CLK>,
 595                                  <&crg HISTB_USB2_12M_CLK>,
 596                                  <&crg HISTB_USB2_48M_CLK>;
 597                         clock-names = "bus", "clk12", "clk48";
 598                         resets = <&crg 0xb8 12>;
 599                         reset-names = "bus";
 600                         phys = <&usb2_phy1_port0>;
 601                         phy-names = "usb";
 602                         status = "disabled";
 603                 };
 604
 605                 ehci: ehci@9890000 {
 606                         compatible = "generic-ehci";
 607                         reg = <0x9890000 0x10000>;
 608                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 609                         clocks = <&crg HISTB_USB2_BUS_CLK>,
 610                                  <&crg HISTB_USB2_PHY_CLK>,
 611                                  <&crg HISTB_USB2_UTMI_CLK>;
 612                         clock-names = "bus", "phy", "utmi";
 613                         resets = <&crg 0xb8 12>,
 614                                  <&crg 0xb8 16>,
 615                                  <&crg 0xb8 13>;
 616                         reset-names = "bus", "phy", "utmi";
 617                         phys = <&usb2_phy1_port0>;
 618                         phy-names = "usb";
 619                         status = "disabled";
 620                 };
 621         };
 622 };