arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * SAMSUNG Exynos5433 TM2 board device tree source
   4  *
   5  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
   6  *
   7  * Common device tree source file for Samsung's TM2 and TM2E boards
   8  * which are based on Samsung Exynos5433 SoC.
   9  */
  10
  11 /dts-v1/;
  12 #include "exynos5433.dtsi"
  13 #include <dt-bindings/clock/samsung,s2mps11.h>
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include <dt-bindings/input/input.h>
  16 #include <dt-bindings/interrupt-controller/irq.h>
  17 #include <dt-bindings/sound/samsung-i2s.h>
  18
  19 / {
  20         aliases {
  21                 gsc0 = &gsc_0;
  22                 gsc1 = &gsc_1;
  23                 gsc2 = &gsc_2;
  24                 pinctrl0 = &pinctrl_alive;
  25                 pinctrl1 = &pinctrl_aud;
  26                 pinctrl2 = &pinctrl_cpif;
  27                 pinctrl3 = &pinctrl_ese;
  28                 pinctrl4 = &pinctrl_finger;
  29                 pinctrl5 = &pinctrl_fsys;
  30                 pinctrl6 = &pinctrl_imem;
  31                 pinctrl7 = &pinctrl_nfc;
  32                 pinctrl8 = &pinctrl_peric;
  33                 pinctrl9 = &pinctrl_touch;
  34                 serial0 = &serial_0;
  35                 serial1 = &serial_1;
  36                 serial2 = &serial_2;
  37                 serial3 = &serial_3;
  38                 spi0 = &spi_0;
  39                 spi1 = &spi_1;
  40                 spi2 = &spi_2;
  41                 spi3 = &spi_3;
  42                 spi4 = &spi_4;
  43                 mshc0 = &mshc_0;
  44                 mshc2 = &mshc_2;
  45         };
  46
  47         chosen {
  48                 stdout-path = &serial_1;
  49         };
  50
  51         memory@20000000 {
  52                 device_type = "memory";
  53                 reg = <0x0 0x20000000 0x0 0xc0000000>;
  54         };
  55
  56         gpio-keys {
  57                 compatible = "gpio-keys";
  58
  59                 power-key {
  60                         gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
  61                         linux,code = <KEY_POWER>;
  62                         label = "power key";
  63                         debounce-interval = <10>;
  64                 };
  65
  66                 volume-up-key {
  67                         gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
  68                         linux,code = <KEY_VOLUMEUP>;
  69                         label = "volume-up key";
  70                         debounce-interval = <10>;
  71                 };
  72
  73                 volume-down-key {
  74                         gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
  75                         linux,code = <KEY_VOLUMEDOWN>;
  76                         label = "volume-down key";
  77                         debounce-interval = <10>;
  78                 };
  79
  80                 homepage-key {
  81                         gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
  82                         linux,code = <KEY_MENU>;
  83                         label = "homepage key";
  84                         debounce-interval = <10>;
  85                 };
  86         };
  87
  88         i2c_max98504: i2c-gpio-0 {
  89                 compatible = "i2c-gpio";
  90                 gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
  91                          &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
  92                 i2c-gpio,delay-us = <2>;
  93                 #address-cells = <1>;
  94                 #size-cells = <0>;
  95                 status = "okay";
  96
  97                 max98504: max98504@31 {
  98                         compatible = "maxim,max98504";
  99                         reg = <0x31>;
 100                         maxim,rx-path = <1>;
 101                         maxim,tx-path = <1>;
 102                         maxim,tx-channel-mask = <3>;
 103                         maxim,tx-channel-source = <2>;
 104                 };
 105         };
 106
 107         irda_regulator: irda-regulator {
 108                 compatible = "regulator-fixed";
 109                 enable-active-high;
 110                 gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
 111                 regulator-name = "irda_regulator";
 112         };
 113
 114         sound {
 115                 compatible = "samsung,tm2-audio";
 116                 audio-codec = <&wm5110>, <&hdmi>;
 117                 i2s-controller = <&i2s0 0>, <&i2s1 0>;
 118                 audio-amplifier = <&max98504>;
 119                 mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
 120                 model = "wm5110";
 121                 samsung,audio-routing =
 122                         /* Headphone */
 123                         "HP", "HPOUT1L",
 124                         "HP", "HPOUT1R",
 125
 126                         /* Speaker */
 127                         "SPK", "SPKOUT",
 128                         "SPKOUT", "HPOUT2L",
 129                         "SPKOUT", "HPOUT2R",
 130
 131                         /* Receiver */
 132                         "RCV", "HPOUT3L",
 133                         "RCV", "HPOUT3R";
 134                 status = "okay";
 135         };
 136 };
 137
 138 &adc {
 139         vdd-supply = <&ldo3_reg>;
 140         status = "okay";
 141
 142         thermistor-ap {
 143                 compatible = "murata,ncp03wf104";
 144                 pullup-uv = <1800000>;
 145                 pullup-ohm = <100000>;
 146                 pulldown-ohm = <0>;
 147                 io-channels = <&adc 0>;
 148         };
 149
 150         thermistor-battery {
 151                 compatible = "murata,ncp03wf104";
 152                 pullup-uv = <1800000>;
 153                 pullup-ohm = <100000>;
 154                 pulldown-ohm = <0>;
 155                 io-channels = <&adc 1>;
 156                 #thermal-sensor-cells = <0>;
 157         };
 158
 159         thermistor-charger {
 160                 compatible = "murata,ncp03wf104";
 161                 pullup-uv = <1800000>;
 162                 pullup-ohm = <100000>;
 163                 pulldown-ohm = <0>;
 164                 io-channels = <&adc 2>;
 165         };
 166 };
 167
 168 &bus_g2d_400 {
 169         devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
 170         vdd-supply = <&buck4_reg>;
 171         exynos,saturation-ratio = <10>;
 172         status = "okay";
 173 };
 174
 175 &bus_g2d_266 {
 176         devfreq = <&bus_g2d_400>;
 177         status = "okay";
 178 };
 179
 180 &bus_gscl {
 181         devfreq = <&bus_g2d_400>;
 182         status = "okay";
 183 };
 184
 185 &bus_hevc {
 186         devfreq = <&bus_g2d_400>;
 187         status = "okay";
 188 };
 189
 190 &bus_jpeg {
 191         devfreq = <&bus_g2d_400>;
 192         status = "okay";
 193 };
 194
 195 &bus_mfc {
 196         devfreq = <&bus_g2d_400>;
 197         status = "okay";
 198 };
 199
 200 &bus_mscl {
 201         devfreq = <&bus_g2d_400>;
 202         status = "okay";
 203 };
 204
 205 &bus_noc0 {
 206         devfreq = <&bus_g2d_400>;
 207         status = "okay";
 208 };
 209
 210 &bus_noc1 {
 211         devfreq = <&bus_g2d_400>;
 212         status = "okay";
 213 };
 214
 215 &bus_noc2 {
 216         devfreq = <&bus_g2d_400>;
 217         status = "okay";
 218 };
 219
 220 &cmu_aud {
 221         assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
 222                 <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>,
 223                 <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>,
 224                 <&cmu_top CLK_MOUT_AUD_PLL>,
 225                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
 226                 <&cmu_top CLK_MOUT_SCLK_AUDIO0>,
 227                 <&cmu_top CLK_MOUT_SCLK_AUDIO1>,
 228                 <&cmu_top CLK_MOUT_SCLK_SPDIF>,
 229
 230                 <&cmu_aud CLK_DIV_AUD_CA5>,
 231                 <&cmu_aud CLK_DIV_ACLK_AUD>,
 232                 <&cmu_aud CLK_DIV_PCLK_DBG_AUD>,
 233                 <&cmu_aud CLK_DIV_SCLK_AUD_I2S>,
 234                 <&cmu_aud CLK_DIV_SCLK_AUD_PCM>,
 235                 <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>,
 236                 <&cmu_aud CLK_DIV_SCLK_AUD_UART>,
 237                 <&cmu_top CLK_DIV_SCLK_AUDIO0>,
 238                 <&cmu_top CLK_DIV_SCLK_AUDIO1>,
 239                 <&cmu_top CLK_DIV_SCLK_PCM1>,
 240                 <&cmu_top CLK_DIV_SCLK_I2S1>;
 241
 242         assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>,
 243                 <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
 244                 <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
 245                 <&cmu_top CLK_FOUT_AUD_PLL>,
 246                 <&cmu_top CLK_MOUT_AUD_PLL>,
 247                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
 248                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
 249                 <&cmu_top CLK_SCLK_AUDIO0>;
 250
 251         assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
 252                 <196608001>, <65536001>, <32768001>, <49152001>,
 253                 <2048001>, <24576001>, <196608001>,
 254                 <24576001>, <98304001>, <2048001>, <49152001>;
 255 };
 256
 257 &cmu_fsys {
 258         assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
 259                 <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
 260                 <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
 261                 <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
 262                 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
 263                 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
 264                 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
 265                 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
 266                 <&cmu_top CLK_DIV_SCLK_USBDRD30>,
 267                 <&cmu_top CLK_DIV_SCLK_USBHOST30>;
 268         assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
 269                 <&cmu_top CLK_MOUT_BUS_PLL_USER>,
 270                 <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
 271                 <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
 272                 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
 273                 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
 274                 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
 275                 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
 276         assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
 277                                <66700000>, <66700000>;
 278 };
 279
 280 &cmu_gscl {
 281         assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
 282                           <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
 283         assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
 284                                  <&cmu_top CLK_ACLK_GSCL_333>;
 285 };
 286
 287 &cmu_mfc {
 288         assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
 289         assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
 290 };
 291
 292 &cmu_mscl {
 293         assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
 294                           <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
 295                           <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
 296                           <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
 297         assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
 298                                  <&cmu_top CLK_SCLK_JPEG_MSCL>,
 299                                  <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
 300                                  <&cmu_top CLK_MOUT_BUS_PLL_USER>;
 301 };
 302
 303 &cmu_top {
 304         assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>;
 305         assigned-clock-rates = <196608001>;
 306 };
 307
 308 &cpu0 {
 309         cpu-supply = <&buck3_reg>;
 310 };
 311
 312 &cpu4 {
 313         cpu-supply = <&buck2_reg>;
 314 };
 315
 316 &decon {
 317         status = "okay";
 318 };
 319
 320 &decon_tv {
 321         status = "okay";
 322
 323         ports {
 324                 #address-cells = <1>;
 325                 #size-cells = <0>;
 326
 327                 port@0 {
 328                         reg = <0>;
 329                         tv_to_hdmi: endpoint {
 330                                 remote-endpoint = <&hdmi_to_tv>;
 331                         };
 332                 };
 333         };
 334 };
 335
 336 &dsi {
 337         status = "okay";
 338         vddcore-supply = <&ldo6_reg>;
 339         vddio-supply = <&ldo7_reg>;
 340         samsung,burst-clock-frequency = <512000000>;
 341         samsung,esc-clock-frequency = <16000000>;
 342         samsung,pll-clock-frequency = <24000000>;
 343         pinctrl-names = "default";
 344         pinctrl-0 = <&te_irq>;
 345 };
 346
 347 &hdmi {
 348         hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
 349         status = "okay";
 350         vdd-supply = <&ldo6_reg>;
 351         vdd_osc-supply = <&ldo7_reg>;
 352         vdd_pll-supply = <&ldo6_reg>;
 353
 354         ports {
 355                 #address-cells = <1>;
 356                 #size-cells = <0>;
 357
 358                 port@0 {
 359                         reg = <0>;
 360                         hdmi_to_tv: endpoint {
 361                                 remote-endpoint = <&tv_to_hdmi>;
 362                         };
 363                 };
 364
 365                 port@1 {
 366                         reg = <1>;
 367                         hdmi_to_mhl: endpoint {
 368                                 remote-endpoint = <&mhl_to_hdmi>;
 369                         };
 370                 };
 371         };
 372 };
 373
 374 &hsi2c_0 {
 375         status = "okay";
 376         clock-frequency = <2500000>;
 377
 378         s2mps13-pmic@66 {
 379                 compatible = "samsung,s2mps13-pmic";
 380                 interrupt-parent = <&gpa0>;
 381                 interrupts = <7 IRQ_TYPE_NONE>;
 382                 reg = <0x66>;
 383                 samsung,s2mps11-wrstbi-ground;
 384
 385                 s2mps13_osc: clocks {
 386                         compatible = "samsung,s2mps13-clk";
 387                         #clock-cells = <1>;
 388                         clock-output-names = "s2mps13_ap", "s2mps13_cp",
 389                                 "s2mps13_bt";
 390                 };
 391
 392                 regulators {
 393                         ldo1_reg: LDO1 {
 394                                 regulator-name = "VDD_ALIVE_0.9V_AP";
 395                                 regulator-min-microvolt = <900000>;
 396                                 regulator-max-microvolt = <900000>;
 397                                 regulator-always-on;
 398                         };
 399
 400                         ldo2_reg: LDO2 {
 401                                 regulator-name = "VDDQ_MMC2_2.8V_AP";
 402                                 regulator-min-microvolt = <2800000>;
 403                                 regulator-max-microvolt = <2800000>;
 404                                 regulator-always-on;
 405                                 regulator-state-mem {
 406                                         regulator-off-in-suspend;
 407                                 };
 408                         };
 409
 410                         ldo3_reg: LDO3 {
 411                                 regulator-name = "VDD1_E_1.8V_AP";
 412                                 regulator-min-microvolt = <1800000>;
 413                                 regulator-max-microvolt = <1800000>;
 414                                 regulator-always-on;
 415                         };
 416
 417                         ldo4_reg: LDO4 {
 418                                 regulator-name = "VDD10_MIF_PLL_1.0V_AP";
 419                                 regulator-min-microvolt = <1300000>;
 420                                 regulator-max-microvolt = <1300000>;
 421                                 regulator-always-on;
 422                                 regulator-state-mem {
 423                                         regulator-off-in-suspend;
 424                                 };
 425                         };
 426
 427                         ldo5_reg: LDO5 {
 428                                 regulator-name = "VDD10_DPLL_1.0V_AP";
 429                                 regulator-min-microvolt = <1000000>;
 430                                 regulator-max-microvolt = <1000000>;
 431                                 regulator-always-on;
 432                                 regulator-state-mem {
 433                                         regulator-off-in-suspend;
 434                                 };
 435                         };
 436
 437                         ldo6_reg: LDO6 {
 438                                 regulator-name = "VDD10_MIPI2L_1.0V_AP";
 439                                 regulator-min-microvolt = <1000000>;
 440                                 regulator-max-microvolt = <1000000>;
 441                                 regulator-state-mem {
 442                                         regulator-off-in-suspend;
 443                                 };
 444                         };
 445
 446                         ldo7_reg: LDO7 {
 447                                 regulator-name = "VDD18_MIPI2L_1.8V_AP";
 448                                 regulator-min-microvolt = <1800000>;
 449                                 regulator-max-microvolt = <1800000>;
 450                                 regulator-always-on;
 451                                 regulator-state-mem {
 452                                         regulator-off-in-suspend;
 453                                 };
 454                         };
 455
 456                         ldo8_reg: LDO8 {
 457                                 regulator-name = "VDD18_LLI_1.8V_AP";
 458                                 regulator-min-microvolt = <1800000>;
 459                                 regulator-max-microvolt = <1800000>;
 460                                 regulator-always-on;
 461                                 regulator-state-mem {
 462                                         regulator-off-in-suspend;
 463                                 };
 464                         };
 465
 466                         ldo9_reg: LDO9 {
 467                                 regulator-name = "VDD18_ABB_ETC_1.8V_AP";
 468                                 regulator-min-microvolt = <1800000>;
 469                                 regulator-max-microvolt = <1800000>;
 470                                 regulator-always-on;
 471                                 regulator-state-mem {
 472                                         regulator-off-in-suspend;
 473                                 };
 474                         };
 475
 476                         ldo10_reg: LDO10 {
 477                                 regulator-name = "VDD33_USB30_3.0V_AP";
 478                                 regulator-min-microvolt = <3000000>;
 479                                 regulator-max-microvolt = <3000000>;
 480                                 regulator-state-mem {
 481                                         regulator-off-in-suspend;
 482                                 };
 483                         };
 484
 485                         ldo11_reg: LDO11 {
 486                                 regulator-name = "VDD_INT_M_1.0V_AP";
 487                                 regulator-min-microvolt = <1000000>;
 488                                 regulator-max-microvolt = <1000000>;
 489                                 regulator-always-on;
 490                                 regulator-state-mem {
 491                                         regulator-off-in-suspend;
 492                                 };
 493                         };
 494
 495                         ldo12_reg: LDO12 {
 496                                 regulator-name = "VDD_KFC_M_1.1V_AP";
 497                                 regulator-min-microvolt = <800000>;
 498                                 regulator-max-microvolt = <1350000>;
 499                                 regulator-always-on;
 500                         };
 501
 502                         ldo13_reg: LDO13 {
 503                                 regulator-name = "VDD_G3D_M_0.95V_AP";
 504                                 regulator-min-microvolt = <950000>;
 505                                 regulator-max-microvolt = <950000>;
 506                                 regulator-always-on;
 507                                 regulator-state-mem {
 508                                         regulator-off-in-suspend;
 509                                 };
 510                         };
 511
 512                         ldo14_reg: LDO14 {
 513                                 regulator-name = "VDDQ_M1_LDO_1.2V_AP";
 514                                 regulator-min-microvolt = <1200000>;
 515                                 regulator-max-microvolt = <1200000>;
 516                                 regulator-always-on;
 517                                 regulator-state-mem {
 518                                         regulator-off-in-suspend;
 519                                 };
 520                         };
 521
 522                         ldo15_reg: LDO15 {
 523                                 regulator-name = "VDDQ_M2_LDO_1.2V_AP";
 524                                 regulator-min-microvolt = <1200000>;
 525                                 regulator-max-microvolt = <1200000>;
 526                                 regulator-always-on;
 527                                 regulator-state-mem {
 528                                         regulator-off-in-suspend;
 529                                 };
 530                         };
 531
 532                         ldo16_reg: LDO16 {
 533                                 regulator-name = "VDDQ_EFUSE";
 534                                 regulator-min-microvolt = <1400000>;
 535                                 regulator-max-microvolt = <3400000>;
 536                                 regulator-always-on;
 537                         };
 538
 539                         ldo17_reg: LDO17 {
 540                                 regulator-name = "V_TFLASH_2.8V_AP";
 541                                 regulator-min-microvolt = <2800000>;
 542                                 regulator-max-microvolt = <2800000>;
 543                         };
 544
 545                         ldo18_reg: LDO18 {
 546                                 regulator-name = "V_CODEC_1.8V_AP";
 547                                 regulator-min-microvolt = <1800000>;
 548                                 regulator-max-microvolt = <1800000>;
 549                         };
 550
 551                         ldo19_reg: LDO19 {
 552                                 regulator-name = "VDDA_1.8V_COMP";
 553                                 regulator-min-microvolt = <1800000>;
 554                                 regulator-max-microvolt = <1800000>;
 555                                 regulator-always-on;
 556                         };
 557
 558                         ldo20_reg: LDO20 {
 559                                 regulator-name = "VCC_2.8V_AP";
 560                                 regulator-min-microvolt = <2800000>;
 561                                 regulator-max-microvolt = <2800000>;
 562                                 regulator-always-on;
 563                         };
 564
 565                         ldo21_reg: LDO21 {
 566                                 regulator-name = "VT_CAM_1.8V";
 567                                 regulator-min-microvolt = <1800000>;
 568                                 regulator-max-microvolt = <1800000>;
 569                         };
 570
 571                         ldo22_reg: LDO22 {
 572                                 regulator-name = "CAM_IO_1.8V_AP";
 573                                 regulator-min-microvolt = <1800000>;
 574                                 regulator-max-microvolt = <1800000>;
 575                         };
 576
 577                         ldo23_reg: LDO23 {
 578                                 regulator-name = "CAM_SEN_CORE_1.05V_AP";
 579                                 regulator-min-microvolt = <1050000>;
 580                                 regulator-max-microvolt = <1050000>;
 581                         };
 582
 583                         ldo24_reg: LDO24 {
 584                                 regulator-name = "VT_CAM_1.2V";
 585                                 regulator-min-microvolt = <1200000>;
 586                                 regulator-max-microvolt = <1200000>;
 587                         };
 588
 589                         ldo25_reg: LDO25 {
 590                                 regulator-name = "UNUSED_LDO25";
 591                                 regulator-min-microvolt = <2800000>;
 592                                 regulator-max-microvolt = <2800000>;
 593                         };
 594
 595                         ldo26_reg: LDO26 {
 596                                 regulator-name = "CAM_AF_2.8V_AP";
 597                                 regulator-min-microvolt = <2800000>;
 598                                 regulator-max-microvolt = <2800000>;
 599                         };
 600
 601                         ldo27_reg: LDO27 {
 602                                 regulator-name = "VCC_3.0V_LCD_AP";
 603                                 regulator-min-microvolt = <3000000>;
 604                                 regulator-max-microvolt = <3000000>;
 605                         };
 606
 607                         ldo28_reg: LDO28 {
 608                                 regulator-name = "VCC_1.8V_LCD_AP";
 609                                 regulator-min-microvolt = <1800000>;
 610                                 regulator-max-microvolt = <1800000>;
 611                         };
 612
 613                         ldo29_reg: LDO29 {
 614                                 regulator-name = "VT_CAM_2.8V";
 615                                 regulator-min-microvolt = <3000000>;
 616                                 regulator-max-microvolt = <3000000>;
 617                         };
 618
 619                         ldo30_reg: LDO30 {
 620                                 regulator-name = "TSP_AVDD_3.3V_AP";
 621                                 regulator-min-microvolt = <3300000>;
 622                                 regulator-max-microvolt = <3300000>;
 623                         };
 624
 625                         ldo31_reg: LDO31 {
 626                                 /*
 627                                  * LDO31 differs from target to target,
 628                                  * its definition is in the .dts
 629                                  */
 630                         };
 631
 632                         ldo32_reg: LDO32 {
 633                                 regulator-name = "VTOUCH_1.8V_AP";
 634                                 regulator-min-microvolt = <1800000>;
 635                                 regulator-max-microvolt = <1800000>;
 636                         };
 637
 638                         ldo33_reg: LDO33 {
 639                                 regulator-name = "VTOUCH_LED_3.3V";
 640                                 regulator-min-microvolt = <2500000>;
 641                                 regulator-max-microvolt = <3300000>;
 642                                 regulator-ramp-delay = <12500>;
 643                         };
 644
 645                         ldo34_reg: LDO34 {
 646                                 regulator-name = "VCC_1.8V_MHL_AP";
 647                                 regulator-min-microvolt = <1000000>;
 648                                 regulator-max-microvolt = <2100000>;
 649                         };
 650
 651                         ldo35_reg: LDO35 {
 652                                 regulator-name = "OIS_VM_2.8V";
 653                                 regulator-min-microvolt = <1800000>;
 654                                 regulator-max-microvolt = <2800000>;
 655                         };
 656
 657                         ldo36_reg: LDO36 {
 658                                 regulator-name = "VSIL_1.0V";
 659                                 regulator-min-microvolt = <1000000>;
 660                                 regulator-max-microvolt = <1000000>;
 661                         };
 662
 663                         ldo37_reg: LDO37 {
 664                                 regulator-name = "VF_1.8V";
 665                                 regulator-min-microvolt = <1800000>;
 666                                 regulator-max-microvolt = <1800000>;
 667                         };
 668
 669                         ldo38_reg: LDO38 {
 670                                 /*
 671                                  * LDO38 differs from target to target,
 672                                  * its definition is in the .dts
 673                                  */
 674                         };
 675
 676                         ldo39_reg: LDO39 {
 677                                 regulator-name = "V_HRM_1.8V";
 678                                 regulator-min-microvolt = <1800000>;
 679                                 regulator-max-microvolt = <1800000>;
 680                         };
 681
 682                         ldo40_reg: LDO40 {
 683                                 regulator-name = "V_HRM_3.3V";
 684                                 regulator-min-microvolt = <3300000>;
 685                                 regulator-max-microvolt = <3300000>;
 686                         };
 687
 688                         buck1_reg: BUCK1 {
 689                                 regulator-name = "VDD_MIF_0.9V_AP";
 690                                 regulator-min-microvolt = <600000>;
 691                                 regulator-max-microvolt = <1500000>;
 692                                 regulator-always-on;
 693                                 regulator-state-mem {
 694                                         regulator-off-in-suspend;
 695                                 };
 696                         };
 697
 698                         buck2_reg: BUCK2 {
 699                                 regulator-name = "VDD_EGL_1.0V_AP";
 700                                 regulator-min-microvolt = <900000>;
 701                                 regulator-max-microvolt = <1300000>;
 702                                 regulator-always-on;
 703                                 regulator-state-mem {
 704                                         regulator-off-in-suspend;
 705                                 };
 706                         };
 707
 708                         buck3_reg: BUCK3 {
 709                                 regulator-name = "VDD_KFC_1.0V_AP";
 710                                 regulator-min-microvolt = <800000>;
 711                                 regulator-max-microvolt = <1200000>;
 712                                 regulator-always-on;
 713                                 regulator-state-mem {
 714                                         regulator-off-in-suspend;
 715                                 };
 716                         };
 717
 718                         buck4_reg: BUCK4 {
 719                                 regulator-name = "VDD_INT_0.95V_AP";
 720                                 regulator-min-microvolt = <600000>;
 721                                 regulator-max-microvolt = <1500000>;
 722                                 regulator-always-on;
 723                                 regulator-state-mem {
 724                                         regulator-off-in-suspend;
 725                                 };
 726                         };
 727
 728                         buck5_reg: BUCK5 {
 729                                 regulator-name = "VDD_DISP_CAM0_0.9V_AP";
 730                                 regulator-min-microvolt = <600000>;
 731                                 regulator-max-microvolt = <1500000>;
 732                                 regulator-always-on;
 733                                 regulator-state-mem {
 734                                         regulator-off-in-suspend;
 735                                 };
 736                         };
 737
 738                         buck6_reg: BUCK6 {
 739                                 regulator-name = "VDD_G3D_0.9V_AP";
 740                                 regulator-min-microvolt = <600000>;
 741                                 regulator-max-microvolt = <1500000>;
 742                                 regulator-always-on;
 743                                 regulator-state-mem {
 744                                         regulator-off-in-suspend;
 745                                 };
 746                         };
 747
 748                         buck7_reg: BUCK7 {
 749                                 regulator-name = "VDD_MEM1_1.2V_AP";
 750                                 regulator-min-microvolt = <1200000>;
 751                                 regulator-max-microvolt = <1200000>;
 752                                 regulator-always-on;
 753                         };
 754
 755                         buck8_reg: BUCK8 {
 756                                 regulator-name = "VDD_LLDO_1.35V_AP";
 757                                 regulator-min-microvolt = <1350000>;
 758                                 regulator-max-microvolt = <3300000>;
 759                                 regulator-always-on;
 760                         };
 761
 762                         buck9_reg: BUCK9 {
 763                                 regulator-name = "VDD_MLDO_2.0V_AP";
 764                                 regulator-min-microvolt = <1350000>;
 765                                 regulator-max-microvolt = <3300000>;
 766                                 regulator-always-on;
 767                         };
 768
 769                         buck10_reg: BUCK10 {
 770                                 regulator-name = "vdd_mem2";
 771                                 regulator-min-microvolt = <550000>;
 772                                 regulator-max-microvolt = <1500000>;
 773                                 regulator-always-on;
 774                         };
 775                 };
 776         };
 777 };
 778
 779 &hsi2c_4 {
 780         status = "okay";
 781
 782         s3fwrn5: nfc@27 {
 783                 compatible = "samsung,s3fwrn5-i2c";
 784                 reg = <0x27>;
 785                 interrupt-parent = <&gpa1>;
 786                 interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 787                 s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
 788                 s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
 789         };
 790 };
 791
 792 &hsi2c_5 {
 793         status = "okay";
 794
 795         stmfts: touchscreen@49 {
 796                 compatible = "st,stmfts";
 797                 reg = <0x49>;
 798                 interrupt-parent = <&gpa1>;
 799                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 800                 avdd-supply = <&ldo30_reg>;
 801                 vdd-supply = <&ldo31_reg>;
 802         };
 803 };
 804
 805 &hsi2c_7 {
 806         status = "okay";
 807         clock-frequency = <1000000>;
 808
 809         sii8620@39 {
 810                 reg = <0x39>;
 811                 compatible = "sil,sii8620";
 812                 cvcc10-supply = <&ldo36_reg>;
 813                 iovcc18-supply = <&ldo34_reg>;
 814                 interrupt-parent = <&gpf0>;
 815                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 816                 reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
 817                 clocks = <&pmu_system_controller 0>;
 818                 clock-names = "xtal";
 819
 820                 ports {
 821                         #address-cells = <1>;
 822                         #size-cells = <0>;
 823
 824                         port@0 {
 825                                 reg = <0>;
 826                                 mhl_to_hdmi: endpoint {
 827                                         remote-endpoint = <&hdmi_to_mhl>;
 828                                 };
 829                         };
 830
 831                         port@1 {
 832                                 reg = <1>;
 833                                 mhl_to_musb_con: endpoint {
 834                                         remote-endpoint = <&musb_con_to_mhl>;
 835                                 };
 836                         };
 837                 };
 838         };
 839 };
 840
 841 &hsi2c_8 {
 842         status = "okay";
 843
 844         max77843@66 {
 845                 compatible = "maxim,max77843";
 846                 interrupt-parent = <&gpa1>;
 847                 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 848                 reg = <0x66>;
 849
 850                 muic: max77843-muic {
 851                         compatible = "maxim,max77843-muic";
 852
 853                         musb_con: musb_connector {
 854                                 compatible = "samsung,usb-connector-11pin",
 855                                              "usb-b-connector";
 856                                 label = "micro-USB";
 857                                 type = "micro";
 858
 859                                 ports {
 860                                         #address-cells = <1>;
 861                                         #size-cells = <0>;
 862
 863                                         port@3 {
 864                                                 reg = <3>;
 865                                                 musb_con_to_mhl: endpoint {
 866                                                         remote-endpoint = <&mhl_to_musb_con>;
 867                                                 };
 868                                         };
 869                                 };
 870                         };
 871
 872                         ports {
 873                                 port {
 874                                         muic_to_usb: endpoint {
 875                                                 remote-endpoint = <&usb_to_muic>;
 876                                         };
 877                                 };
 878                         };
 879                 };
 880
 881                 regulators {
 882                         compatible = "maxim,max77843-regulator";
 883                         safeout1_reg: SAFEOUT1 {
 884                                 regulator-name = "SAFEOUT1";
 885                                 regulator-min-microvolt = <3300000>;
 886                                 regulator-max-microvolt = <4950000>;
 887                         };
 888
 889                         safeout2_reg: SAFEOUT2 {
 890                                 regulator-name = "SAFEOUT2";
 891                                 regulator-min-microvolt = <3300000>;
 892                                 regulator-max-microvolt = <4950000>;
 893                         };
 894
 895                         charger_reg: CHARGER {
 896                                 regulator-name = "CHARGER";
 897                                 regulator-min-microamp = <100000>;
 898                                 regulator-max-microamp = <3150000>;
 899                         };
 900                 };
 901
 902                 haptic: max77843-haptic {
 903                         compatible = "maxim,max77843-haptic";
 904                         haptic-supply = <&ldo38_reg>;
 905                         pwms = <&pwm 0 33670 0>;
 906                         pwm-names = "haptic";
 907                 };
 908         };
 909 };
 910
 911 &hsi2c_11 {
 912         status = "okay";
 913 };
 914
 915 &i2s0 {
 916         status = "okay";
 917 };
 918
 919 &i2s1 {
 920         assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>;
 921         assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>;
 922         status = "okay";
 923 };
 924
 925 &mshc_0 {
 926         status = "okay";
 927         mmc-hs200-1_8v;
 928         mmc-hs400-1_8v;
 929         cap-mmc-highspeed;
 930         non-removable;
 931         card-detect-delay = <200>;
 932         samsung,dw-mshc-ciu-div = <3>;
 933         samsung,dw-mshc-sdr-timing = <0 4>;
 934         samsung,dw-mshc-ddr-timing = <0 2>;
 935         samsung,dw-mshc-hs400-timing = <0 3>;
 936         samsung,read-strobe-delay = <90>;
 937         fifo-depth = <0x80>;
 938         pinctrl-names = "default";
 939         pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
 940                         &sd0_bus8 &sd0_rdqs>;
 941         bus-width = <8>;
 942         assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
 943         assigned-clock-rates = <800000000>;
 944 };
 945
 946 &mshc_2 {
 947         status = "okay";
 948         cap-sd-highspeed;
 949         disable-wp;
 950         cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
 951         card-detect-delay = <200>;
 952         samsung,dw-mshc-ciu-div = <3>;
 953         samsung,dw-mshc-sdr-timing = <0 4>;
 954         samsung,dw-mshc-ddr-timing = <0 2>;
 955         fifo-depth = <0x80>;
 956         pinctrl-names = "default";
 957         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
 958         bus-width = <4>;
 959 };
 960
 961 &ppmu_d0_general {
 962         status = "okay";
 963         events {
 964                 ppmu_event0_d0_general: ppmu-event0-d0-general {
 965                         event-name = "ppmu-event0-d0-general";
 966                 };
 967         };
 968 };
 969
 970 &ppmu_d1_general {
 971         status = "okay";
 972         events {
 973                 ppmu_event0_d1_general: ppmu-event0-d1-general {
 974                        event-name = "ppmu-event0-d1-general";
 975                };
 976        };
 977 };
 978
 979 &pinctrl_alive {
 980         pinctrl-names = "default";
 981         pinctrl-0 = <&initial_alive>;
 982
 983         initial_alive: initial-state {
 984                 PIN(INPUT, gpa0-0, DOWN, FAST_SR1);
 985                 PIN(INPUT, gpa0-1, NONE, FAST_SR1);
 986                 PIN(INPUT, gpa0-2, DOWN, FAST_SR1);
 987                 PIN(INPUT, gpa0-3, NONE, FAST_SR1);
 988                 PIN(INPUT, gpa0-4, NONE, FAST_SR1);
 989                 PIN(INPUT, gpa0-5, DOWN, FAST_SR1);
 990                 PIN(INPUT, gpa0-6, NONE, FAST_SR1);
 991                 PIN(INPUT, gpa0-7, NONE, FAST_SR1);
 992
 993                 PIN(INPUT, gpa1-0, UP, FAST_SR1);
 994                 PIN(INPUT, gpa1-1, UP, FAST_SR1);
 995                 PIN(INPUT, gpa1-2, NONE, FAST_SR1);
 996                 PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
 997                 PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
 998                 PIN(INPUT, gpa1-5, NONE, FAST_SR1);
 999                 PIN(INPUT, gpa1-6, NONE, FAST_SR1);
1000                 PIN(INPUT, gpa1-7, NONE, FAST_SR1);
1001
1002                 PIN(INPUT, gpa2-0, NONE, FAST_SR1);
1003                 PIN(INPUT, gpa2-1, NONE, FAST_SR1);
1004                 PIN(INPUT, gpa2-2, NONE, FAST_SR1);
1005                 PIN(INPUT, gpa2-3, DOWN, FAST_SR1);
1006                 PIN(INPUT, gpa2-4, NONE, FAST_SR1);
1007                 PIN(INPUT, gpa2-5, DOWN, FAST_SR1);
1008                 PIN(INPUT, gpa2-6, DOWN, FAST_SR1);
1009                 PIN(INPUT, gpa2-7, NONE, FAST_SR1);
1010
1011                 PIN(INPUT, gpa3-0, DOWN, FAST_SR1);
1012                 PIN(INPUT, gpa3-1, DOWN, FAST_SR1);
1013                 PIN(INPUT, gpa3-2, NONE, FAST_SR1);
1014                 PIN(INPUT, gpa3-3, DOWN, FAST_SR1);
1015                 PIN(INPUT, gpa3-4, NONE, FAST_SR1);
1016                 PIN(INPUT, gpa3-5, DOWN, FAST_SR1);
1017                 PIN(INPUT, gpa3-6, DOWN, FAST_SR1);
1018                 PIN(INPUT, gpa3-7, DOWN, FAST_SR1);
1019
1020                 PIN(INPUT, gpf1-0, NONE, FAST_SR1);
1021                 PIN(INPUT, gpf1-1, NONE, FAST_SR1);
1022                 PIN(INPUT, gpf1-2, DOWN, FAST_SR1);
1023                 PIN(INPUT, gpf1-4, UP, FAST_SR1);
1024                 PIN(OUTPUT, gpf1-5, NONE, FAST_SR1);
1025                 PIN(INPUT, gpf1-6, DOWN, FAST_SR1);
1026                 PIN(INPUT, gpf1-7, DOWN, FAST_SR1);
1027
1028                 PIN(INPUT, gpf2-0, DOWN, FAST_SR1);
1029                 PIN(INPUT, gpf2-1, DOWN, FAST_SR1);
1030                 PIN(INPUT, gpf2-2, DOWN, FAST_SR1);
1031                 PIN(INPUT, gpf2-3, DOWN, FAST_SR1);
1032
1033                 PIN(INPUT, gpf3-0, DOWN, FAST_SR1);
1034                 PIN(INPUT, gpf3-1, DOWN, FAST_SR1);
1035                 PIN(INPUT, gpf3-2, NONE, FAST_SR1);
1036                 PIN(INPUT, gpf3-3, DOWN, FAST_SR1);
1037
1038                 PIN(INPUT, gpf4-0, DOWN, FAST_SR1);
1039                 PIN(INPUT, gpf4-1, DOWN, FAST_SR1);
1040                 PIN(INPUT, gpf4-2, DOWN, FAST_SR1);
1041                 PIN(INPUT, gpf4-3, DOWN, FAST_SR1);
1042                 PIN(INPUT, gpf4-4, DOWN, FAST_SR1);
1043                 PIN(INPUT, gpf4-5, DOWN, FAST_SR1);
1044                 PIN(INPUT, gpf4-6, DOWN, FAST_SR1);
1045                 PIN(INPUT, gpf4-7, DOWN, FAST_SR1);
1046
1047                 PIN(INPUT, gpf5-0, DOWN, FAST_SR1);
1048                 PIN(INPUT, gpf5-1, DOWN, FAST_SR1);
1049                 PIN(INPUT, gpf5-2, DOWN, FAST_SR1);
1050                 PIN(INPUT, gpf5-3, DOWN, FAST_SR1);
1051                 PIN(OUTPUT, gpf5-4, NONE, FAST_SR1);
1052                 PIN(INPUT, gpf5-5, DOWN, FAST_SR1);
1053                 PIN(INPUT, gpf5-6, DOWN, FAST_SR1);
1054                 PIN(INPUT, gpf5-7, DOWN, FAST_SR1);
1055         };
1056
1057         te_irq: te_irq {
1058                 samsung,pins = "gpf1-3";
1059                 samsung,pin-function = <0xf>;
1060         };
1061 };
1062
1063 &pinctrl_cpif {
1064         pinctrl-names = "default";
1065         pinctrl-0 = <&initial_cpif>;
1066
1067         initial_cpif: initial-state {
1068                 PIN(INPUT, gpv6-0, DOWN, FAST_SR1);
1069                 PIN(INPUT, gpv6-1, DOWN, FAST_SR1);
1070         };
1071 };
1072
1073 &pinctrl_ese {
1074         pinctrl-names = "default";
1075         pinctrl-0 = <&initial_ese>;
1076
1077         initial_ese: initial-state {
1078                 PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
1079                 PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
1080                 PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
1081         };
1082 };
1083
1084 &pinctrl_fsys {
1085         pinctrl-names = "default";
1086         pinctrl-0 = <&initial_fsys>;
1087
1088         initial_fsys: initial-state {
1089                 PIN(INPUT, gpr3-0, NONE, FAST_SR1);
1090                 PIN(INPUT, gpr3-1, DOWN, FAST_SR1);
1091                 PIN(INPUT, gpr3-2, DOWN, FAST_SR1);
1092                 PIN(INPUT, gpr3-3, DOWN, FAST_SR1);
1093                 PIN(INPUT, gpr3-7, NONE, FAST_SR1);
1094         };
1095 };
1096
1097 &pinctrl_imem {
1098         pinctrl-names = "default";
1099         pinctrl-0 = <&initial_imem>;
1100
1101         initial_imem: initial-state {
1102                 PIN(INPUT, gpf0-0, UP, FAST_SR1);
1103                 PIN(INPUT, gpf0-1, UP, FAST_SR1);
1104                 PIN(INPUT, gpf0-2, DOWN, FAST_SR1);
1105                 PIN(INPUT, gpf0-3, UP, FAST_SR1);
1106                 PIN(INPUT, gpf0-4, DOWN, FAST_SR1);
1107                 PIN(INPUT, gpf0-5, NONE, FAST_SR1);
1108                 PIN(INPUT, gpf0-6, DOWN, FAST_SR1);
1109                 PIN(INPUT, gpf0-7, UP, FAST_SR1);
1110         };
1111 };
1112
1113 &pinctrl_nfc {
1114         pinctrl-names = "default";
1115         pinctrl-0 = <&initial_nfc>;
1116
1117         initial_nfc: initial-state {
1118                 PIN(INPUT, gpj0-2, DOWN, FAST_SR1);
1119         };
1120 };
1121
1122 &pinctrl_peric {
1123         pinctrl-names = "default";
1124         pinctrl-0 = <&initial_peric>;
1125
1126         initial_peric: initial-state {
1127                 PIN(INPUT, gpv7-0, DOWN, FAST_SR1);
1128                 PIN(INPUT, gpv7-1, DOWN, FAST_SR1);
1129                 PIN(INPUT, gpv7-2, NONE, FAST_SR1);
1130                 PIN(INPUT, gpv7-3, DOWN, FAST_SR1);
1131                 PIN(INPUT, gpv7-4, DOWN, FAST_SR1);
1132                 PIN(INPUT, gpv7-5, DOWN, FAST_SR1);
1133
1134                 PIN(INPUT, gpb0-4, DOWN, FAST_SR1);
1135
1136                 PIN(INPUT, gpc0-2, DOWN, FAST_SR1);
1137                 PIN(INPUT, gpc0-5, DOWN, FAST_SR1);
1138                 PIN(INPUT, gpc0-7, DOWN, FAST_SR1);
1139
1140                 PIN(INPUT, gpc1-1, DOWN, FAST_SR1);
1141
1142                 PIN(INPUT, gpc3-4, NONE, FAST_SR1);
1143                 PIN(INPUT, gpc3-5, NONE, FAST_SR1);
1144                 PIN(INPUT, gpc3-6, NONE, FAST_SR1);
1145                 PIN(INPUT, gpc3-7, NONE, FAST_SR1);
1146
1147                 PIN(OUTPUT, gpg0-0, NONE, FAST_SR1);
1148                 PIN(2, gpg0-1, DOWN, FAST_SR1);
1149
1150                 PIN(INPUT, gpd2-5, DOWN, FAST_SR1);
1151
1152                 PIN(INPUT, gpd4-0, NONE, FAST_SR1);
1153                 PIN(INPUT, gpd4-1, DOWN, FAST_SR1);
1154                 PIN(INPUT, gpd4-2, DOWN, FAST_SR1);
1155                 PIN(INPUT, gpd4-3, DOWN, FAST_SR1);
1156                 PIN(INPUT, gpd4-4, DOWN, FAST_SR1);
1157
1158                 PIN(INPUT, gpd6-3, DOWN, FAST_SR1);
1159
1160                 PIN(INPUT, gpd8-1, UP, FAST_SR1);
1161
1162                 PIN(INPUT, gpg1-0, DOWN, FAST_SR1);
1163                 PIN(INPUT, gpg1-1, DOWN, FAST_SR1);
1164                 PIN(INPUT, gpg1-2, DOWN, FAST_SR1);
1165                 PIN(INPUT, gpg1-3, DOWN, FAST_SR1);
1166                 PIN(INPUT, gpg1-4, DOWN, FAST_SR1);
1167
1168                 PIN(INPUT, gpg2-0, DOWN, FAST_SR1);
1169                 PIN(INPUT, gpg2-1, DOWN, FAST_SR1);
1170
1171                 PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
1172                 PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
1173                 PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
1174         };
1175 };
1176
1177 &pinctrl_touch {
1178         pinctrl-names = "default";
1179         pinctrl-0 = <&initial_touch>;
1180
1181         initial_touch: initial-state {
1182                 PIN(INPUT, gpj1-2, DOWN, FAST_SR1);
1183         };
1184 };
1185
1186 &pwm {
1187         pinctrl-0 = <&pwm0_out>;
1188         pinctrl-names = "default";
1189         status = "okay";
1190 };
1191
1192 &mic {
1193         status = "okay";
1194 };
1195
1196 &pmu_system_controller {
1197         assigned-clocks = <&pmu_system_controller 0>;
1198         assigned-clock-parents = <&xxti>;
1199 };
1200
1201 &serial_1 {
1202         status = "okay";
1203 };
1204
1205 &spi_1 {
1206         cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
1207         status = "okay";
1208
1209         wm5110: wm5110-codec@0 {
1210                 compatible = "wlf,wm5110";
1211                 reg = <0x0>;
1212                 spi-max-frequency = <20000000>;
1213                 interrupt-parent = <&gpa0>;
1214                 interrupts = <4 IRQ_TYPE_NONE>;
1215                 clocks = <&pmu_system_controller 0>,
1216                         <&s2mps13_osc S2MPS11_CLK_BT>;
1217                 clock-names = "mclk1", "mclk2";
1218
1219                 gpio-controller;
1220                 #gpio-cells = <2>;
1221
1222                 wlf,micd-detect-debounce = <300>;
1223                 wlf,micd-bias-start-time = <0x1>;
1224                 wlf,micd-rate = <0x7>;
1225                 wlf,micd-dbtime = <0x1>;
1226                 wlf,micd-force-micbias;
1227                 wlf,micd-configs = <0x0 1 0>;
1228                 wlf,hpdet-channel = <1>;
1229                 wlf,gpsw = <0x1>;
1230                 wlf,inmode = <2 0 2 0>;
1231
1232                 wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
1233                 wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
1234
1235                 /* core supplies */
1236                 AVDD-supply = <&ldo18_reg>;
1237                 DBVDD1-supply = <&ldo18_reg>;
1238                 CPVDD-supply = <&ldo18_reg>;
1239                 DBVDD2-supply = <&ldo18_reg>;
1240                 DBVDD3-supply = <&ldo18_reg>;
1241
1242                 controller-data {
1243                         samsung,spi-feedback-delay = <0>;
1244                 };
1245         };
1246 };
1247
1248 &spi_3 {
1249         status = "okay";
1250         no-cs-readback;
1251
1252         irled@0 {
1253                 compatible = "ir-spi-led";
1254                 reg = <0x0>;
1255                 spi-max-frequency = <5000000>;
1256                 power-supply = <&irda_regulator>;
1257                 duty-cycle = <60>;
1258                 led-active-low;
1259
1260                 controller-data {
1261                         samsung,spi-feedback-delay = <0>;
1262                 };
1263         };
1264 };
1265
1266 &timer {
1267         clock-frequency = <24000000>;
1268 };
1269
1270 &tmu_atlas0 {
1271         vtmu-supply = <&ldo3_reg>;
1272         status = "okay";
1273 };
1274
1275 &tmu_apollo {
1276         vtmu-supply = <&ldo3_reg>;
1277         status = "okay";
1278 };
1279
1280 &tmu_g3d {
1281         vtmu-supply = <&ldo3_reg>;
1282         status = "okay";
1283 };
1284
1285 &usbdrd30 {
1286         vdd33-supply = <&ldo10_reg>;
1287         vdd10-supply = <&ldo6_reg>;
1288         status = "okay";
1289 };
1290
1291 &usbdrd_dwc3 {
1292         dr_mode = "otg";
1293 };
1294
1295 &usbdrd30_phy {
1296         vbus-supply = <&safeout1_reg>;
1297         status = "okay";
1298
1299         port {
1300                 usb_to_muic: endpoint {
1301                         remote-endpoint = <&muic_to_usb>;
1302                 };
1303         };
1304 };
1305
1306 &xxti {
1307         clock-frequency = <24000000>;
1308 };