arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi

   1 /*
   2  *  BSD LICENSE
   3  *
   4  *  Copyright(c) 2015-2017 Broadcom.  All rights reserved.
   5  *
   6  *  Redistribution and use in source and binary forms, with or without
   7  *  modification, are permitted provided that the following conditions
   8  *  are met:
   9  *
  10  *    * Redistributions of source code must retain the above copyright
  11  *      notice, this list of conditions and the following disclaimer.
  12  *    * Redistributions in binary form must reproduce the above copyright
  13  *      notice, this list of conditions and the following disclaimer in
  14  *      the documentation and/or other materials provided with the
  15  *      distribution.
  16  *    * Neither the name of Broadcom nor the names of its
  17  *      contributors may be used to endorse or promote products derived
  18  *      from this software without specific prior written permission.
  19  *
  20  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  21  *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  22  *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  23  *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  24  *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  25  *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  26  *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  27  *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  28  *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  29  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  30  *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  31  */
  32
  33 #include <dt-bindings/interrupt-controller/arm-gic.h>
  34
  35 / {
  36         compatible = "brcm,stingray";
  37         interrupt-parent = <&gic>;
  38         #address-cells = <2>;
  39         #size-cells = <2>;
  40
  41         cpus {
  42                 #address-cells = <2>;
  43                 #size-cells = <0>;
  44
  45                 cpu@0 {
  46                         device_type = "cpu";
  47                         compatible = "arm,cortex-a72";
  48                         reg = <0x0 0x0>;
  49                         enable-method = "psci";
  50                         next-level-cache = <&CLUSTER0_L2>;
  51                 };
  52
  53                 cpu@1 {
  54                         device_type = "cpu";
  55                         compatible = "arm,cortex-a72";
  56                         reg = <0x0 0x1>;
  57                         enable-method = "psci";
  58                         next-level-cache = <&CLUSTER0_L2>;
  59                 };
  60
  61                 cpu@100 {
  62                         device_type = "cpu";
  63                         compatible = "arm,cortex-a72";
  64                         reg = <0x0 0x100>;
  65                         enable-method = "psci";
  66                         next-level-cache = <&CLUSTER1_L2>;
  67                 };
  68
  69                 cpu@101 {
  70                         device_type = "cpu";
  71                         compatible = "arm,cortex-a72";
  72                         reg = <0x0 0x101>;
  73                         enable-method = "psci";
  74                         next-level-cache = <&CLUSTER1_L2>;
  75                 };
  76
  77                 cpu@200 {
  78                         device_type = "cpu";
  79                         compatible = "arm,cortex-a72";
  80                         reg = <0x0 0x200>;
  81                         enable-method = "psci";
  82                         next-level-cache = <&CLUSTER2_L2>;
  83                 };
  84
  85                 cpu@201 {
  86                         device_type = "cpu";
  87                         compatible = "arm,cortex-a72";
  88                         reg = <0x0 0x201>;
  89                         enable-method = "psci";
  90                         next-level-cache = <&CLUSTER2_L2>;
  91                 };
  92
  93                 cpu@300 {
  94                         device_type = "cpu";
  95                         compatible = "arm,cortex-a72";
  96                         reg = <0x0 0x300>;
  97                         enable-method = "psci";
  98                         next-level-cache = <&CLUSTER3_L2>;
  99                 };
 100
 101                 cpu@301 {
 102                         device_type = "cpu";
 103                         compatible = "arm,cortex-a72";
 104                         reg = <0x0 0x301>;
 105                         enable-method = "psci";
 106                         next-level-cache = <&CLUSTER3_L2>;
 107                 };
 108
 109                 CLUSTER0_L2: l2-cache@0 {
 110                         compatible = "cache";
 111                 };
 112
 113                 CLUSTER1_L2: l2-cache@100 {
 114                         compatible = "cache";
 115                 };
 116
 117                 CLUSTER2_L2: l2-cache@200 {
 118                         compatible = "cache";
 119                 };
 120
 121                 CLUSTER3_L2: l2-cache@300 {
 122                         compatible = "cache";
 123                 };
 124         };
 125
 126         memory: memory@80000000 {
 127                 device_type = "memory";
 128                 reg = <0x00000000 0x80000000 0 0x40000000>;
 129         };
 130
 131         psci {
 132                 compatible = "arm,psci-0.2";
 133                 method = "smc";
 134         };
 135
 136         pmu {
 137                 compatible = "arm,armv8-pmuv3";
 138                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 139         };
 140
 141         timer {
 142                 compatible = "arm,armv8-timer";
 143                 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 144                              <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 145                              <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
 146                              <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 147         };
 148
 149         mhb: syscon@60401000 {
 150                 compatible = "brcm,sr-mhb", "syscon";
 151                 reg = <0 0x60401000 0 0x38c>;
 152         };
 153
 154         scr {
 155                 compatible = "simple-bus";
 156                 #address-cells = <1>;
 157                 #size-cells = <1>;
 158                 ranges = <0x0 0x0 0x61000000 0x05000000>;
 159
 160                 ccn: ccn@0 {
 161                         compatible = "arm,ccn-502";
 162                         reg = <0x00000000 0x900000>;
 163                         interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
 164                 };
 165
 166                 gic: interrupt-controller@2c00000 {
 167                         compatible = "arm,gic-v3";
 168                         #interrupt-cells = <3>;
 169                         #address-cells = <1>;
 170                         #size-cells = <1>;
 171                         ranges;
 172                         interrupt-controller;
 173                         reg = <0x02c00000 0x010000>, /* GICD */
 174                               <0x02e00000 0x600000>; /* GICR */
 175                         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 176
 177                         gic_its: gic-its@63c20000 {
 178                                 compatible = "arm,gic-v3-its";
 179                                 msi-controller;
 180                                 #msi-cells = <1>;
 181                                 reg = <0x02c20000 0x10000>;
 182                         };
 183                 };
 184
 185                 smmu: mmu@3000000 {
 186                         compatible = "arm,mmu-500";
 187                         reg = <0x03000000 0x80000>;
 188                         #global-interrupts = <1>;
 189                         interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>,
 190                                      <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
 191                                      <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
 192                                      <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
 193                                      <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
 194                                      <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
 195                                      <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>,
 196                                      <GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>,
 197                                      <GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>,
 198                                      <GIC_SPI 719 IRQ_TYPE_LEVEL_HIGH>,
 199                                      <GIC_SPI 720 IRQ_TYPE_LEVEL_HIGH>,
 200                                      <GIC_SPI 721 IRQ_TYPE_LEVEL_HIGH>,
 201                                      <GIC_SPI 722 IRQ_TYPE_LEVEL_HIGH>,
 202                                      <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH>,
 203                                      <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>,
 204                                      <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>,
 205                                      <GIC_SPI 726 IRQ_TYPE_LEVEL_HIGH>,
 206                                      <GIC_SPI 727 IRQ_TYPE_LEVEL_HIGH>,
 207                                      <GIC_SPI 728 IRQ_TYPE_LEVEL_HIGH>,
 208                                      <GIC_SPI 729 IRQ_TYPE_LEVEL_HIGH>,
 209                                      <GIC_SPI 730 IRQ_TYPE_LEVEL_HIGH>,
 210                                      <GIC_SPI 731 IRQ_TYPE_LEVEL_HIGH>,
 211                                      <GIC_SPI 732 IRQ_TYPE_LEVEL_HIGH>,
 212                                      <GIC_SPI 733 IRQ_TYPE_LEVEL_HIGH>,
 213                                      <GIC_SPI 734 IRQ_TYPE_LEVEL_HIGH>,
 214                                      <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
 215                                      <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>,
 216                                      <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
 217                                      <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>,
 218                                      <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
 219                                      <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>,
 220                                      <GIC_SPI 741 IRQ_TYPE_LEVEL_HIGH>,
 221                                      <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>,
 222                                      <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>,
 223                                      <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>,
 224                                      <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>,
 225                                      <GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>,
 226                                      <GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>,
 227                                      <GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>,
 228                                      <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
 229                                      <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
 230                                      <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
 231                                      <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
 232                                      <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
 233                                      <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
 234                                      <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
 235                                      <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
 236                                      <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>,
 237                                      <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
 238                                      <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
 239                                      <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
 240                                      <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
 241                                      <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
 242                                      <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH>,
 243                                      <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>,
 244                                      <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
 245                                      <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
 246                                      <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
 247                                      <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
 248                                      <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
 249                                      <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
 250                                      <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
 251                                      <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
 252                                      <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
 253                                      <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
 254                         #iommu-cells = <2>;
 255                 };
 256         };
 257
 258         crmu: crmu {
 259                 compatible = "simple-bus";
 260                 #address-cells = <1>;
 261                 #size-cells = <1>;
 262                 ranges = <0x0 0x0 0x66400000 0x100000>;
 263
 264                 #include "stingray-clock.dtsi"
 265
 266                 otp: otp@1c400 {
 267                         compatible = "brcm,ocotp-v2";
 268                         reg = <0x0001c400 0x68>;
 269                         brcm,ocotp-size = <2048>;
 270                         status = "okay";
 271                 };
 272
 273                 cdru: syscon@1d000 {
 274                         compatible = "brcm,sr-cdru", "syscon";
 275                         reg = <0x0001d000 0x400>;
 276                 };
 277
 278                 gpio_crmu: gpio@24800 {
 279                         compatible = "brcm,iproc-gpio";
 280                         reg = <0x00024800 0x4c>;
 281                         ngpios = <6>;
 282                         #gpio-cells = <2>;
 283                         gpio-controller;
 284                 };
 285         };
 286
 287         #include "stingray-fs4.dtsi"
 288         #include "stingray-sata.dtsi"
 289         #include "stingray-pcie.dtsi"
 290         #include "stingray-usb.dtsi"
 291
 292         hsls {
 293                 compatible = "simple-bus";
 294                 #address-cells = <1>;
 295                 #size-cells = <1>;
 296                 ranges = <0x0 0x0 0x68900000 0x17700000>;
 297
 298                 #include "stingray-pinctrl.dtsi"
 299
 300                 mdio_mux_iproc: mdio-mux@20000 {
 301                         compatible = "brcm,mdio-mux-iproc";
 302                         reg = <0x00020000 0x250>;
 303                         #address-cells = <1>;
 304                         #size-cells = <0>;
 305
 306                         mdio@0 { /* PCIe serdes */
 307                                 reg = <0x0>;
 308                                 #address-cells = <1>;
 309                                 #size-cells = <0>;
 310                         };
 311
 312                         mdio@2 { /* SATA */
 313                                 reg = <0x2>;
 314                                 #address-cells = <1>;
 315                                 #size-cells = <0>;
 316                         };
 317
 318                         mdio@3 { /* USB */
 319                                 reg = <0x3>;
 320                                 #address-cells = <1>;
 321                                 #size-cells = <0>;
 322                         };
 323
 324                         mdio@10 { /* RGMII */
 325                                 reg = <0x10>;
 326                                 #address-cells = <1>;
 327                                 #size-cells = <0>;
 328                         };
 329                 };
 330
 331                 pwm: pwm@10000 {
 332                         compatible = "brcm,iproc-pwm";
 333                         reg = <0x00010000 0x1000>;
 334                         clocks = <&crmu_ref25m>;
 335                         #pwm-cells = <3>;
 336                         status = "disabled";
 337                 };
 338
 339                 timer0: timer@30000 {
 340                         compatible = "arm,sp804", "arm,primecell";
 341                         reg = <0x00030000 0x1000>;
 342                         interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 343                         clocks = <&hsls_25m_div2_clk>,
 344                                  <&hsls_25m_div2_clk>,
 345                                  <&hsls_div4_clk>;
 346                         clock-names = "timer1", "timer2", "apb_pclk";
 347                         status = "disabled";
 348                 };
 349
 350                 timer1: timer@40000 {
 351                         compatible = "arm,sp804", "arm,primecell";
 352                         reg = <0x00040000 0x1000>;
 353                         interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
 354                         clocks = <&hsls_25m_div2_clk>,
 355                                  <&hsls_25m_div2_clk>,
 356                                  <&hsls_div4_clk>;
 357                         clock-names = "timer1", "timer2", "apb_pclk";
 358                 };
 359
 360                 timer2: timer@50000 {
 361                         compatible = "arm,sp804", "arm,primecell";
 362                         reg = <0x00050000 0x1000>;
 363                         interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
 364                         clocks = <&hsls_25m_div2_clk>,
 365                                  <&hsls_25m_div2_clk>,
 366                                  <&hsls_div4_clk>;
 367                         clock-names = "timer1", "timer2", "apb_pclk";
 368                         status = "disabled";
 369                 };
 370
 371                 timer3: timer@60000 {
 372                         compatible = "arm,sp804", "arm,primecell";
 373                         reg = <0x00060000 0x1000>;
 374                         interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
 375                         clocks = <&hsls_25m_div2_clk>,
 376                                  <&hsls_25m_div2_clk>,
 377                                  <&hsls_div4_clk>;
 378                         clock-names = "timer1", "timer2", "apb_pclk";
 379                         status = "disabled";
 380                 };
 381
 382                 timer4: timer@70000 {
 383                         compatible = "arm,sp804", "arm,primecell";
 384                         reg = <0x00070000 0x1000>;
 385                         interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 386                         clocks = <&hsls_25m_div2_clk>,
 387                                  <&hsls_25m_div2_clk>,
 388                                  <&hsls_div4_clk>;
 389                         clock-names = "timer1", "timer2", "apb_pclk";
 390                         status = "disabled";
 391                 };
 392
 393                 timer5: timer@80000 {
 394                         compatible = "arm,sp804", "arm,primecell";
 395                         reg = <0x00080000 0x1000>;
 396                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 397                         clocks = <&hsls_25m_div2_clk>,
 398                                  <&hsls_25m_div2_clk>,
 399                                  <&hsls_div4_clk>;
 400                         clock-names = "timer1", "timer2", "apb_pclk";
 401                         status = "disabled";
 402                 };
 403
 404                 timer6: timer@90000 {
 405                         compatible = "arm,sp804", "arm,primecell";
 406                         reg = <0x00090000 0x1000>;
 407                         interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
 408                         clocks = <&hsls_25m_div2_clk>,
 409                                  <&hsls_25m_div2_clk>,
 410                                  <&hsls_div4_clk>;
 411                         clock-names = "timer1", "timer2", "apb_pclk";
 412                         status = "disabled";
 413                 };
 414
 415                 timer7: timer@a0000 {
 416                         compatible = "arm,sp804", "arm,primecell";
 417                         reg = <0x000a0000 0x1000>;
 418                         interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
 419                         clocks = <&hsls_25m_div2_clk>,
 420                                  <&hsls_25m_div2_clk>,
 421                                  <&hsls_div4_clk>;
 422                         clock-names = "timer1", "timer2", "apb_pclk";
 423                         status = "disabled";
 424                 };
 425
 426                 i2c0: i2c@b0000 {
 427                         compatible = "brcm,iproc-i2c";
 428                         reg = <0x000b0000 0x100>;
 429                         #address-cells = <1>;
 430                         #size-cells = <0>;
 431                         interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 432                         clock-frequency = <100000>;
 433                         status = "disabled";
 434                 };
 435
 436                 wdt0: watchdog@c0000 {
 437                         compatible = "arm,sp805", "arm,primecell";
 438                         reg = <0x000c0000 0x1000>;
 439                         interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 440                         clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
 441                         clock-names = "wdogclk", "apb_pclk";
 442                         timeout-sec = <60>;
 443                 };
 444
 445                 gpio_hsls: gpio@d0000 {
 446                         compatible = "brcm,iproc-gpio";
 447                         reg = <0x000d0000 0x864>;
 448                         ngpios = <151>;
 449                         #gpio-cells = <2>;
 450                         gpio-controller;
 451                         interrupt-controller;
 452                         interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 453                         gpio-ranges = <&pinmux 0 0 16>,
 454                                         <&pinmux 16 71 2>,
 455                                         <&pinmux 18 131 8>,
 456                                         <&pinmux 26 83 6>,
 457                                         <&pinmux 32 123 4>,
 458                                         <&pinmux 36 43 24>,
 459                                         <&pinmux 60 89 2>,
 460                                         <&pinmux 62 73 4>,
 461                                         <&pinmux 66 95 28>,
 462                                         <&pinmux 94 127 4>,
 463                                         <&pinmux 98 139 10>,
 464                                         <&pinmux 108 16 27>,
 465                                         <&pinmux 135 77 6>,
 466                                         <&pinmux 141 67 4>,
 467                                         <&pinmux 145 149 6>;
 468                 };
 469
 470                 i2c1: i2c@e0000 {
 471                         compatible = "brcm,iproc-i2c";
 472                         reg = <0x000e0000 0x100>;
 473                         #address-cells = <1>;
 474                         #size-cells = <0>;
 475                         interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 476                         clock-frequency = <100000>;
 477                         status = "disabled";
 478                 };
 479
 480                 uart0: uart@100000 {
 481                         device_type = "serial";
 482                         compatible = "snps,dw-apb-uart";
 483                         reg = <0x00100000 0x1000>;
 484                         reg-shift = <2>;
 485                         clock-frequency = <25000000>;
 486                         interrupt-parent = <&gic>;
 487                         interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 488                         status = "disabled";
 489                 };
 490
 491                 uart1: uart@110000 {
 492                         device_type = "serial";
 493                         compatible = "snps,dw-apb-uart";
 494                         reg = <0x00110000 0x1000>;
 495                         reg-shift = <2>;
 496                         clock-frequency = <25000000>;
 497                         interrupt-parent = <&gic>;
 498                         interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 499                         status = "disabled";
 500                 };
 501
 502                 uart2: uart@120000 {
 503                         device_type = "serial";
 504                         compatible = "snps,dw-apb-uart";
 505                         reg = <0x00120000 0x1000>;
 506                         reg-shift = <2>;
 507                         clock-frequency = <25000000>;
 508                         interrupt-parent = <&gic>;
 509                         interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 510                         status = "disabled";
 511                 };
 512
 513                 uart3: uart@130000 {
 514                         device_type = "serial";
 515                         compatible = "snps,dw-apb-uart";
 516                         reg = <0x00130000 0x1000>;
 517                         reg-shift = <2>;
 518                         clock-frequency = <25000000>;
 519                         interrupt-parent = <&gic>;
 520                         interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
 521                         status = "disabled";
 522                 };
 523
 524                 ssp0: spi@180000 {
 525                         compatible = "arm,pl022", "arm,primecell";
 526                         reg = <0x00180000 0x1000>;
 527                         interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
 528                         clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
 529                         clock-names = "spiclk", "apb_pclk";
 530                         num-cs = <1>;
 531                         #address-cells = <1>;
 532                         #size-cells = <0>;
 533                         status = "disabled";
 534                 };
 535
 536                 ssp1: spi@190000 {
 537                         compatible = "arm,pl022", "arm,primecell";
 538                         reg = <0x00190000 0x1000>;
 539                         interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 540                         clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
 541                         clock-names = "spiclk", "apb_pclk";
 542                         num-cs = <1>;
 543                         #address-cells = <1>;
 544                         #size-cells = <0>;
 545                         status = "disabled";
 546                 };
 547
 548                 hwrng: hwrng@220000 {
 549                         compatible = "brcm,iproc-rng200";
 550                         reg = <0x00220000 0x28>;
 551                 };
 552
 553                 dma0: dma@310000 {
 554                         compatible = "arm,pl330", "arm,primecell";
 555                         reg = <0x00310000 0x1000>;
 556                         interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
 557                                      <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
 558                                      <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
 559                                      <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
 560                                      <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
 561                                      <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
 562                                      <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
 563                                      <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
 564                                      <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
 565                         #dma-cells = <1>;
 566                         #dma-channels = <8>;
 567                         #dma-requests = <32>;
 568                         clocks = <&hsls_div2_clk>;
 569                         clock-names = "apb_pclk";
 570                         iommus = <&smmu 0x6000 0x0000>;
 571                 };
 572
 573                 enet: ethernet@340000{
 574                         compatible = "brcm,amac";
 575                         reg = <0x00340000 0x1000>;
 576                         reg-names = "amac_base";
 577                         dma-coherent;
 578                         interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
 579                         status= "disabled";
 580                 };
 581
 582                 nand: nand@360000 {
 583                         compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 584                         reg = <0x00360000 0x600>,
 585                               <0x0050a408 0x600>,
 586                               <0x00360f00 0x20>;
 587                         reg-names = "nand", "iproc-idm", "iproc-ext";
 588                         interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
 589                         #address-cells = <1>;
 590                         #size-cells = <0>;
 591                         brcm,nand-has-wp;
 592                         status = "disabled";
 593                 };
 594
 595                 sdio0: sdhci@3f1000 {
 596                         compatible = "brcm,sdhci-iproc";
 597                         reg = <0x003f1000 0x100>;
 598                         interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
 599                         bus-width = <8>;
 600                         clocks = <&sdio0_clk>;
 601                         iommus = <&smmu 0x6002 0x0000>;
 602                         status = "disabled";
 603                 };
 604
 605                 sdio1: sdhci@3f2000 {
 606                         compatible = "brcm,sdhci-iproc";
 607                         reg = <0x003f2000 0x100>;
 608                         interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
 609                         bus-width = <8>;
 610                         clocks = <&sdio1_clk>;
 611                         iommus = <&smmu 0x6003 0x0000>;
 612                         status = "disabled";
 613                 };
 614         };
 615
 616         tmons {
 617                 compatible = "simple-bus";
 618                 #address-cells = <1>;
 619                 #size-cells = <1>;
 620                 ranges = <0x0 0x0 0x8f100000 0x100>;
 621
 622                 tmon: tmon@0 {
 623                         compatible = "brcm,sr-thermal";
 624                         reg = <0x0 0x40>;
 625                         brcm,tmon-mask = <0x3f>;
 626                         #thermal-sensor-cells = <1>;
 627                 };
 628         };
 629
 630         thermal-zones {
 631                 ihost0_thermal: ihost0-thermal {
 632                         polling-delay-passive = <0>;
 633                         polling-delay = <1000>;
 634                         thermal-sensors = <&tmon 0>;
 635                         trips {
 636                                 cpu-crit {
 637                                         temperature = <105000>;
 638                                         hysteresis = <0>;
 639                                         type = "critical";
 640                                 };
 641                         };
 642                 };
 643                 ihost1_thermal: ihost1-thermal {
 644                         polling-delay-passive = <0>;
 645                         polling-delay = <1000>;
 646                         thermal-sensors = <&tmon 1>;
 647                         trips {
 648                                 cpu-crit {
 649                                         temperature = <105000>;
 650                                         hysteresis = <0>;
 651                                         type = "critical";
 652                                 };
 653                         };
 654                 };
 655                 ihost2_thermal: ihost2-thermal {
 656                         polling-delay-passive = <0>;
 657                         polling-delay = <1000>;
 658                         thermal-sensors = <&tmon 2>;
 659                         trips {
 660                                 cpu-crit {
 661                                         temperature = <105000>;
 662                                         hysteresis = <0>;
 663                                         type = "critical";
 664                                 };
 665                         };
 666                 };
 667                 ihost3_thermal: ihost3-thermal {
 668                         polling-delay-passive = <0>;
 669                         polling-delay = <1000>;
 670                         thermal-sensors = <&tmon 3>;
 671                         trips {
 672                                 cpu-crit {
 673                                         temperature = <105000>;
 674                                         hysteresis = <0>;
 675                                         type = "critical";
 676                                 };
 677                         };
 678                 };
 679                 crmu_thermal: crmu-thermal {
 680                         polling-delay-passive = <0>;
 681                         polling-delay = <1000>;
 682                         thermal-sensors = <&tmon 4>;
 683                         trips {
 684                                 cpu-crit {
 685                                         temperature = <105000>;
 686                                         hysteresis = <0>;
 687                                         type = "critical";
 688                                 };
 689                         };
 690                 };
 691                 nitro_thermal: nitro-thermal {
 692                         polling-delay-passive = <0>;
 693                         polling-delay = <1000>;
 694                         thermal-sensors = <&tmon 5>;
 695                         trips {
 696                                 cpu-crit {
 697                                         temperature = <105000>;
 698                                         hysteresis = <0>;
 699                                         type = "critical";
 700                                 };
 701                         };
 702                 };
 703         };
 704
 705         nic-hsls {
 706                 compatible = "simple-bus";
 707                 #address-cells = <1>;
 708                 #size-cells = <1>;
 709                 ranges = <0x0 0x0  0x0 0x7fffffff>;
 710
 711                 nic_i2c0: i2c@60826100 {
 712                         compatible = "brcm,iproc-nic-i2c";
 713                         #address-cells = <1>;
 714                         #size-cells = <0>;
 715                         reg = <0x60826100 0x100>,
 716                               <0x60e00408 0x1000>;
 717                         brcm,ape-hsls-addr-mask = <0x03400000>;
 718                         clock-frequency = <100000>;
 719                         status = "disabled";
 720                 };
 721         };
 722 };