arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
   4  */
   5
   6 /dts-v1/;
   7
   8 #include <dt-bindings/input/input.h>
   9
  10 #include "meson-gxl-s905x-p212.dtsi"
  11
  12 / {
  13         compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl";
  14         model = "Khadas VIM";
  15
  16         adc-keys {
  17                 compatible = "adc-keys";
  18                 io-channels = <&saradc 0>;
  19                 io-channel-names = "buttons";
  20                 keyup-threshold-microvolt = <1710000>;
  21
  22                 button-function {
  23                         label = "Function";
  24                         linux,code = <KEY_FN>;
  25                         press-threshold-microvolt = <10000>;
  26                 };
  27         };
  28
  29         aliases {
  30                 serial2 = &uart_AO_B;
  31                 ethernet0 = &ethmac;
  32         };
  33
  34         gpio-keys-polled {
  35                 compatible = "gpio-keys-polled";
  36                 #address-cells = <1>;
  37                 #size-cells = <0>;
  38                 poll-interval = <100>;
  39
  40                 button@0 {
  41                         label = "power";
  42                         linux,code = <KEY_POWER>;
  43                         gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
  44                 };
  45         };
  46
  47         pwmleds {
  48                 compatible = "pwm-leds";
  49
  50                 power {
  51                         label = "vim:red:power";
  52                         pwms = <&pwm_AO_ab 1 7812500 0>;
  53                         max-brightness = <255>;
  54                         linux,default-trigger = "default-on";
  55                 };
  56         };
  57
  58         hdmi-connector {
  59                 compatible = "hdmi-connector";
  60                 type = "a";
  61
  62                 port {
  63                         hdmi_connector_in: endpoint {
  64                                 remote-endpoint = <&hdmi_tx_tmds_out>;
  65                         };
  66                 };
  67         };
  68 };
  69
  70 &cec_AO {
  71         status = "okay";
  72         pinctrl-0 = <&ao_cec_pins>;
  73         pinctrl-names = "default";
  74         hdmi-phandle = <&hdmi_tx>;
  75 };
  76
  77 &hdmi_tx {
  78         status = "okay";
  79         pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
  80         pinctrl-names = "default";
  81         hdmi-supply = <&hdmi_5v>;
  82 };
  83
  84 &hdmi_tx_tmds_port {
  85         hdmi_tx_tmds_out: endpoint {
  86                 remote-endpoint = <&hdmi_connector_in>;
  87         };
  88 };
  89
  90 &i2c_A {
  91         status = "okay";
  92         pinctrl-0 = <&i2c_a_pins>;
  93         pinctrl-names = "default";
  94 };
  95
  96 &i2c_B {
  97         status = "okay";
  98         pinctrl-0 = <&i2c_b_pins>;
  99         pinctrl-names = "default";
 100
 101         rtc: rtc@51 {
 102                 /* has to be enabled manually when a battery is connected: */
 103                 status = "disabled";
 104                 compatible = "haoyu,hym8563";
 105                 reg = <0x51>;
 106                 #clock-cells = <0>;
 107                 clock-frequency = <32768>;
 108                 clock-output-names = "xin32k";
 109         };
 110 };
 111
 112 &ir {
 113         linux,rc-map-name = "rc-khadas";
 114 };
 115
 116 &gpio_ao {
 117         gpio-line-names = "UART TX",
 118                           "UART RX",
 119                           "Power Key In",
 120                           "J9 Header Pin35",
 121                           "J9 Header Pin16",
 122                           "J9 Header Pin15",
 123                           "J9 Header Pin33",
 124                           "IR In",
 125                           "HDMI CEC",
 126                           "SYS LED",
 127                           /* GPIO_TEST_N */
 128                           "";
 129 };
 130
 131 &gpio {
 132         gpio-line-names = /* Bank GPIOZ */
 133                           "", "", "", "", "", "", "",
 134                           "", "", "", "", "", "", "",
 135                           "Power OFF",
 136                           "VCCK Enable",
 137                           /* Bank GPIOH */
 138                           "HDMI HPD", "HDMI SDA", "HDMI SCL",
 139                           "HDMI_5V_EN", "SPDIF",
 140                           "J9 Header Pin37",
 141                           "J9 Header Pin30",
 142                           "J9 Header Pin29",
 143                           "J9 Header Pin32",
 144                           "J9 Header Pin31",
 145                           /* Bank BOOT */
 146                           "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
 147                           "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
 148                           "eMMC Clk", "eMMC Reset", "eMMC CMD",
 149                           "", "BOOT_MODE", "", "", "eMMC Data Strobe",
 150                           /* Bank CARD */
 151                           "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
 152                           "SDCard D3", "SDCard D2", "SDCard Det",
 153                           /* Bank GPIODV */
 154                           "", "", "", "", "", "", "", "", "", "", "", "",
 155                           "", "", "", "", "", "", "", "", "", "", "", "",
 156                           "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
 157                           "VCCK Regulator", "VDDEE Regulator",
 158                           /* Bank GPIOX */
 159                           "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
 160                           "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
 161                           "WIFI Power Enable", "WIFI WAKE HOST",
 162                           "Bluetooth PCM DOUT", "Bluetooth PCM DIN",
 163                           "Bluetooth PCM SYNC", "Bluetooth PCM CLK",
 164                           "Bluetooth UART TX", "Bluetooth UART RX",
 165                           "Bluetooth UART CTS", "Bluetooth UART RTS",
 166                           "WIFI 32K", "Bluetooth Enable",
 167                           "Bluetooth WAKE HOST",
 168                           /* Bank GPIOCLK */
 169                           "", "J9 Header Pin39";
 170 };
 171
 172 &pwm_AO_ab {
 173         status = "okay";
 174         pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
 175         pinctrl-names = "default";
 176         clocks = <&xtal> , <&xtal>;
 177         clock-names = "clkin0", "clkin1" ;
 178 };
 179
 180 &pwm_ef {
 181         pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
 182 };
 183
 184 &sd_emmc_a {
 185         brcmf: wifi@1 {
 186                 reg = <1>;
 187                 compatible = "brcm,bcm4329-fmac";
 188         };
 189 };
 190
 191 &uart_A {
 192         bluetooth {
 193                 compatible = "brcm,bcm43438-bt";
 194                 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 195         };
 196 };
 197
 198 /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
 199 &uart_AO {
 200         status = "okay";
 201 };
 202
 203 /* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
 204 &uart_AO_B {
 205         status = "okay";
 206         pinctrl-0 = <&uart_ao_b_pins>;
 207         pinctrl-names = "default";
 208 };